Ematic 7”Portable DVD Player

EPD707

Table Of Contents

Safety Precaution 1

Package 3

Main Features 3

Main Unit Controls 4

Safety Precaution

Thank you for choosing our portable DVD player.The unit applies the latest state of art electronics and is designed for use at home,in hotels and in offices etc for relaxation.

The compact size makes carrying easier as well as installation.Please read the manual carefully prior to use and keep it well for future reference.

Hi-voltage, Don't Open it

System Connection 5

Basic operation 7

Remind user to be careful to avoid electric shock

Virtual Remote Operation 7

System Setup 10

Warning:To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Specification 13 1) Please read the instruction manual carefully and follow all the requirements of safe

operation to operate the device.

Troubleshooting 14

2) Do not use this unit near water.Do not place the unit over any container with liquid

inside.

3) Do not install near any heat sources such as radiators,heat registers,stoves,or other

apparatus(including amplifiers)that produce heat.

4) Unplug this unit during lightning storms or when unused for long time.

5) About Cleaning:Unplug the system,use only wet cloth to clean.Do not use liquid

detergent or aerosol.

6) Only use accessories specified by the manufacturer.

7) Refer all servicing to qualified service personnel,servicing is required when the unit

has been damaged in any way.Such as power supply cord or plug damaged, liquid

spilled or objects falling into the unit,exposed to moisture,not operating normally.

Don't try to repair the machine by yourself because of the danger of high voltage and

electric shock.

8) Do not use irregular shaped discs such as heart or star-shaped discs as they may

cause to the unit malfunction.

1

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Package

DVD Player

AC/DC Power Adapter

Headphone

Carry bag

User Manual

1

1

1

1

1

Main Features

High brightness color 7” LCD screen

Compatible with disc of DVD,VCD,MP3,CD,JPEG,etc

Built-in stereo speaker

Built-in rechargeable Lithium polymer battery

Support PAL or NTSC system

Support Multi-language OSD,speed forward/backward,repeat function

Removal Of Waste Battery a b

Before to discard EOL unit, please remove the waste battery by below steps: a. Pull out the screws on the battery cover by the screwdriver to unpack the

unit.

b. Remove the battery socket from the board.

2 3

Main Unit Controls

14

MUTE

SETUP

MENU

FUCN.

1

3

2

4

9

8

5

6

7

10

11

12

13

16

15

1 . SETUP button

2. MENU button

3. MUTE button

4. FUNCTION button

5. ( )/ ( )

6. OK button

7.

( )/ ( )

8 . PLAY/PAUSE button

4

9. STOP button

10. DC IN 9-12V

11. Power ON/OFF switch

12. AV OUT

13. Earphone jack

14.Open knob

15. Rating label position

16.Volume knob

System Connection

Powering and installation

Plug one end of the AC/DC power adaptor into the DC IN 9-12V jack on the right of the unit, then plug the other end into the AC power receptacle. Please refer to the following illustration.

Connecting to TV

You can also connect the unit to TV to enjoy high quality picture and stereo sound.

Please refer to the following illustration:

AV CABLE

Not supplied

AUDIO IN VIDEO IN

TV

Please use AV cable to connect the machine and the TV. Make sure it is connected correctly.

5

Connecting with external Speaker

The unit can be connected with external speaker.Please see the following illustration.

TV

AV CABLE

Not supplied

VIDEO IN AUDIO IN

AMPLIFIER

Left front speaker

Center speaker

Right front speaker

SUBWOOFER

Left rear speaker Right rear speaker

Note:

There is no 5.1 channel in the unit, however,after connecting to APM it is available to output audio in 5.1 channel.

6

Basic Operation

Playing disc of DVD,CD,MP3

DVD CD MP3

1.Connect the unit to the power;

2.Open the unit and adjust the monitor to the best position for viewing.

3.Turn on the unit by sliding the ON/OFF switch to ON.

4.Open the disc door and insert a disc into the door with the label side facing up.

5.Close the disc door. The unit will load the disc and start playing.

6.During playback,press[ ] to pause;press it again to resume playback.

7.When playing disc of DVD,CD,Press[ ] ,the unit will search forward. Press it repeatedly, the unit will play at 2,4,8,16,32 times of speed.press[ ],the unit will search backward. Press it repeatedly,the unit will play at 2,4,8,16,32 times of speed

8.Press[ ] once to stop playback; then press[ ] to resume playback from the point where you stopped; press[ ] twice to stop playback completely.

9.When the playing is finished, please turn off the power by sliding ON/OFF switch to OFF.

Virtual Remote Operation

1.Press “FUNCTION ”button when disc is playing, you will see a virtual

remote control as below, and the playback will be paused.

2.The virtual key is shown on

the left of the menu, and the

current playback status is

displayed on the right.

SRH

TT

OSD

M ZOOM

ADO SUB

SLOW

Subtitle Off

Repeat Off Mute Off

Angle Mark Null

3.Use the / / / button to

choose the icon, when the icon

is selected, you can see the

description at the bottom.

SEARCH

ANGLE

4.Press OK button, the selected virtual key will be activated, “OK=Selected

function ” icon will be shown at top left for 10 seconds, in these 10 seconds

you just need to press OK button to change the style of the function. If the

icon disappear, the OK key will not work. (For Search, Return, Mute, the

icon won't be shown).

5.You can also press “FUNCTION” button to close virtual remote menu

without any operation. The player will resume playing after the menu exit.

Note:

1.When the disc is in the submenu, press the function key can go back the

title menu.

2.Stop or no disc state, the "FUNCTION" is invalid.

7

Virtual Remote Operation

1.SRH (Search): Press the “SRH” key ,you can see the number bar below, Use

up/down/left/right key to move the cursor, press ok to confirm ,when playing DVD,

you can change the chapter and the title, press the ” tt/ch” icon change the item you

want to change. When playing CD, you can select the track. Note: To select the title,

you need to enter two numbers.

0 1 2 3 4 5 6 7 8 9 OK TT/C

2.M(Menu):to enter or exit menu root

3.ZOOM:When playing DVD discs ,you can zoom in, press the “ZOOM” button and ok button to change the image size according the following sequence: x2 x3 x4, when playing JPEG file, you can zoom in and zoom out, press the

“ZOOM” button and ok button to change the image size according the following sequence: 100% 125% 150% 200% 75% 50%.

4.TT(Title): to display title information

5.ADO( Audio):to select audio language

6.SUB(Subtitle): to select subtitle language when playing DVD disc

7.OSD: Display the disc information during playing DVD CD. Such as elapsed

time and remaining time.

8. ( Repeat): When playing disc of DVD/CD/MP3, you can change the repeat

style by press repeat button. For different type of disc, it change according

different sequence.

DVD: Chapter Title All Repeat off

MP3:

CD:

one

Track

folder

All

9.Slow: You can press slow key to change the playing speed slowly during

playing DVD. Then press OK repeatedly to change the playback speed

according the following sequence: 1/2 1/4 1/8 1/16.

10. (Return): to return to the main menu

11. (MUTE): to turn mute

12.Angle: When playing a DVD disc with multi-angles, press “Angle” button

and OK button to change the display angle.

Note: The function is available only for disc with multi-angle.

8

Playing JPEG file

1.Place a JPEG disc into the tray,the unit will start reading and playing.

2.Press [ ] and OK button to select a JPEG file from the menu.

3.Press [ ] to rotate the picture clockwise.

4.Press [ ] to reverse the picture horizontally and press [ ] to reverse the

picture vertically.

Function operation:

Press "FUNCTION" key you will see the toolbar as below:

Press the / to move the cursor to select functions.

Press "OK" to select the function.

: Return, to return to the main menu.

: To repeat one, repeat all.

: To zoom in/out the image during playback.

Press “FUNCTION” to exit the toolbar.

Play Mp3 file

1.Place a Mp3 disc into the disc door.

2.Press[ ] to select the file; Press OK button to play the file selected.

\Ctyy\

Mp3

Mp3

Mp3

Mp3

Mp3

......

TRACK01

TRACK02

TRACK03

TRACK04

TRACK05

Function operation:

Press "FUNCTION" then you will see the toolbar as below:

0 1 2 3 4 5 6 7 8 9 OK

Press the / to move the cursor to select functions,

Press the number key to select the track.

Press "OK" to select the function.

:MUTE, to turn mute.

: To select repeat one, repeat folder, repeat off.

Press "FUNCTION" to exit the toolbar

9

System Setup

Setup Menu -- Main Page

General Setup

Video Setup

Preference Setup

PressSetupbutton,the main menu will be displayed on the screen

In the General Setup Page,Press button to highlight this item.

Press OK button to access.

Press button to select the setting.

Press OK button to confirm your selection.

Press Setup button to exit.

General Setup Page

General Setup

TV Display Wide

Angle Mark ON

Normal/PS

Normal/LB

OSD Lang ENG

Screen Saver ON

Wide

:Move :Return :Entry

General Setup

TV Display Wide

Angle Mark ON

OSD Lang ENG

Screen Saver ON

On

Off

:Move :Return :Entry

General Setup

TV Display Wide

Angle Mark ON

OSD Lang ENG

Screen Saver ON

English

French

Spanish

Portuguese

:Move :Return :Entry

TV display:

Enter this option,user can set screen display format(Nomal/PS,Nomal/LB,Wide)

The default isWide

Note£º

The function depends on the display ratio

with which the DVD disc is recorded.

Please chooseWide(16:9)when using

a 16:9 wide screen TV set.

Angle Mark:

Enter this option to set the angle during playback.

Optional setting:ON,OFF

The default is:ON

OSD Language:

In the option user can set OSD menu

Language(English,French,Spanish,Portuguese).

The default:English

10

General Setup

TV Display Wide

Angle Mark ON

OSD Lang ENG

Screen Saver ON On

Off

:Move :Return :Entry

Video Setup Page

Video Setup

TV Type NTSC PAL

Panel Quality NTSC

Screen Saver

Enter this option to set whether to activate the screen saver function.

The default is ON.

TV Type:

Enter this option to select TV type(PAL,NTSC)

The default is NTSC.

:Move :Return :Entry

Video Setup

TV Type NTSC

Panel Quality

Set the Video Quality of PANEL

:Move :Return :Entry

Preference Page

Preference Setup

Audio ENG

Subtitle Off

Disc Menu ENG

Parental

Default

English

French

Spanish

Portuguese

:Move :Return :Entry

Audio:

Enter this option,user can select your preferred audio language for DVDs.

The default is English.

Note£º

The audio language depend on the material

on each disc.

User can also change the audio language

during playback by pressing the Audio button.

11

Preference Setup

Audio ENG

Subtitle Off

Disc Menu ENG

Parental

Default

English

French

Spanish

Portuguese

Off

:Move :Return :Entry

Preference Setup

Audio ENG

Subtitle Off

Disc Menu ENG

Parental

Default

:Move :Return

English

French

Spanish

Portuguese

:Entry

Preference Setup

Audio ENG

Subtitle Off

Disc Menu ENG

Parental

Default

:Move :Return

1 KID SAFE

2 G

3 PG

4 PG 13

5 PGR

6 R

7 NC 17

8 ADULT

:Entry

Preference Setup

Audio ENG

Subtitle Off

Disc Menu ENG

Parental

Default Reset

:Move :Return :Entry

Subtitle£º

Select your preferred language to show the subtitles on the screen.

The default is OFF

The subtitle languages depend on the information available on each disc,You can also change the subtitle language during playback by press the SUBTITLE button.

Disc Menu£º

This function allows you to choose the menu language stored on the disc.

The default is English.

Note:the disc menu languages depend on the information available on the disc.

Parental:

Enter this option to set the parental control level to some unsuitable disc scenes being watched by the children.

Optional parental control levels: KID SAFE,

G, PG,PG 13,PGR, R, Nc17, ADULT.

The default of this option is ADULT.

Make continuously pressing “FUNCTION” button on the unit 4 times to be the password

Default:

Select this item and press OK button to reset.

all settings to the original factory settings.

12

Specification

Compatible disc: DVD+R/RW, DVD-R/RW, CD-DA,

CD-R/RW, MP3,JPEG, VCD

Signal system: NTSC/PAL

Panel size: 7 inch

Picture resolution: 480x234(RGB)

Frequency response: 20 Hz to 20 kHz

Video output: 1 Vp-p/75 Ohm, unbalanced

Audio output: 1.4Vrms/10kOhm

Audio S/N: Better than 80 dB

Dynamic range: Better than 85 dB

Laser: Semiconductor Laser, Wave Length: 650 nm/795 nm

Power source: DC 9-12V

Power consumption: 10 W

Operating temperature: 0~40°C

Weight: 0.7kg

Dimensions : 213 x 166 x 40.5 mm

Battery Type: Li Polymer

Note:

1.The quality and speed for reading JPEG photos depend on the resolution and

compression ratio of the photos.Some JPEG photo may not be played due to the disc

quality and the formats.

2.Some DVD+R/RW,DVD-R/RW,CD-R/RW disc may not be played due to the quality on

burning conditions.

Rechargeable battery use

The machine utilize s long-life Li polymer battery for portable power supply.The battery has is fully or partially discharged.It's enough to recharge no longer than 3H each time,fully recharged battery can last about 2 hours with earphone.

Precautions related to Battery Recharge

The battery can be only recharged when turning power to OFF state,and keep continuous power supply, the red light will be on,and the light will turn yellow when it's fully charged.

Using and Maintaining Rechargeable Battery

1. The normal working temperature is:0 °C ~40 °C ;

2. Always unplug AC/DC power supply for the unit when not in use;

3. Heat will create during playing,it's normal,while avoid long time playing and

unattendance;

4. Avoid having the unit collide with any objects,and place away from all possible heat

sources or damp areas.

Caution:Danger of explosion if battery is incorrectly replaced. Replace only with the

same or equivalent type.

13

Troubleshooting

PROBLEM SOLUTION

No sound or distorted sound

Make sure the machine is connected properly.

Make sure all cables are securely inserted into the appropriate jacks.

Can't advance through a movie

The icon appears on screen

You can't advance through the opening credits and warning information that appears at the beginning of movies because the disc is programmed to prohibit that action.

The feature or action cannot be completed at this time because:

1. The disc's software restricts it.

2. The disc's software doesn't support the

feature (e.g., angles)

3. The feature is not available at the moment.

4. You've requested a title or chapter number

that is out of range.

Picture is distorted

No forward or reverse scan

The disc might be damaged. Try another disc;

It is normal for some distortion to appear during forward or reverse scan.

Some discs have sections that prohibit rapid scanning or chapter skip;

If you try to skip through the warning information and credits at the beginning of a movie, you won't be able to. This part of the movie is often programmed to prohibit skipping through it.

Owing to continuous improvement, no prior notice will be given regarding changes on above feature and spec.

14