Samsung UN40D6500 User manual

Contact SAMSUNG WORLDWIDE

If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.

Country Customer Care Center Web Site

CANADA 1-800-SAMSUNG (726-7864) www.samsung.com

U.S.A

1-800-SAMSUNG (726-7864) www.samsung.com

Address

Samsung Electronics Canada Inc., Customer

Service 55 Standish Court Mississauga, Ontario L5R

4B2 Canada

Samsung Electronics America, Inc. 85 Challenger

Road Ridgefi eld Park, NJ 07660-2112

LED TV user manual

© 2011 Samsung Electronics Co., Ltd. All rights reserved.

[UD6500-ZA]BN68-03527A-00Eng.indb 1

BN68-03527A-00

E-MANUAL

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at

www.samsung.com/register

Model _____________ Serial No. _____________

2011-01-28 오후 10:59:54

Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.

Product design and specifications may be changed without notice.

Important Warranty Information Regarding Television Format Viewing

✎

See the warranty card for more information on warranty terms.

Wide screen format LED Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images on screen, such as the dark sidebars on non-expanded standard format television video and programming, should be limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that exceed the above guidelines can cause uneven aging of LED Displays that leave subtle, but permanent burned-in ghost images in the LED picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On LED models that offer picture sizing features, use these controls to view different formats as a full screen picture.

Be careful about the television formats you select and the length of time you view them. Uneven LED aging as a result of format selection and use, as well as burned in images, are not covered by your Samsung limited warranty.

y

SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT

Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung

Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein,

SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.

The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this

Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the Service Center. Transportation to and from the Service Center is the responsibility of the purchaser. Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in normal use of the product.

Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum repair times, exchanges or replacements, accessories, options, upgrades, or consumables.

For the location of a SAMSUNG Authorized Service Center, please call toll-free:

– In the United States : 1-800-SAMSUNG (1-800-726-7864)

– In Canada : 1-800-SAMSUNG

Still image warning

Avoid displaying still images (such as jpeg picture files), still image elements (such as TV channel logos, stock or news bars at the screen bottom etc.), or programs in panorama or 4:3 image format on the screen. Constantly displaying still pictures can cause image burn-in on the LED screen, which will affect image quality. To reduce risk of this effect, please follow the recommendations below: y

Avoid displaying the same TV channel for long periods.

y

Always try to display any image in full screen. Use the TV set’s picture format menu for the best possible match.

y

Reduce brightness and contrast to avoid the appearance of after-images.

y

Use all TV features designed to reduce image retention and screen burn. Refer to the e-Manual for details.


English - 2

2011-01-28 오후 10:59:55

Accessories

✎

Please make sure the following items are included with your TV. If any items are missing, contact your dealer.

✎

The items’ colors and shapes may vary depending on the model.

✎

Check that there are no accessories hidden behind or under packing materials when you open the box.

y

Remote Control (AA59-00442A) & Batteries (AAA x 2) y

Owner’s Instructions y

Power Cord y

Cleaning Cloth y

Warranty Card / Safety Guide

AV/Component Adapter

(BN39-01154W)

AV Adapter

(BN39-01154H)

Input Cables (Sold Separately)

To purchase the RS232 cable, contact www.SamsungParts.com.

Holder-Ring (4EA)

(BN61-07295A)

RS232 (AA39-00311A) Audio

HDMI HDMI-DVI

QWERTY Remote (Sold Separately)

Component Composite (AV) Coaxial (RF)

Holder-Wire stand

(BN61-05491A)

VGA

QWERTY Remote


English - 3

2011-01-28 오후 10:59:56

Viewing the Control Panel

✎

The product color and shape may vary depending on the model.

✎

There are control buttons in rear of TV. When you touch the button, control icons appears.

✎

Any object (an electric wire, etc.) near the control panel may cause unintended activation of the OSD.

TV Rear

Remote control sensor

Power Indicator

E (Source)

MENU o (Volume) k (Channel)

P (Power)

Aim the remote control towards this spot on the TV.

Blinks and turns off when the power is on and lights up in standby mode.

Toggles between all the available input sources. In the on-screen menu, use this button as you would use the ENTER E button on the remote control.

Displays an on-screen menu, the OSD (on screen display) of your TV’s features.

Adjusts the volume. In the OSD, use the

► buttons on the remote control.

buttons as you would use the ◄ and

Changes the channels. In the OSD, use the <> buttons as you would use the ▼ and

▲ buttons on the remote control.

Turns the TV on or off.

Standby mode

Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). It is best to unplug the power cord.

See separate guide for installing the stand.

A 1 EA B 1 EA

Install the Stand

Stand (1EA) Guide Stand (1EA)

C

D x4 (M4 X L12) x4 (M4 X L8)

Screws (8EA)

English - 4

[UD6500-ZA]BN68-03527A-00Eng.indb 4 2011-01-28 오후 10:59:58

1

C

x4

(M4 X L12)

B

A

Front

Rear

3

Side View

Top View

2

ATTENTION

DO NOT USE

CHEMICALS

DO NOT USE

GREASE

DO NOT USE

OIL

(Correct assembly)

✎

Place a soft cloth over the table to protect the TV, and then place the TV on the cloth screen side down.

✎

Insert the Stand Guide into the slot of TV bottom side.

(Incorrect assembly)

4

D

x4

(M4 X L8)

✎

NOTE x

Make sure to distinguish between the front and back of each component when assembling them.

x

Make sure that at least two persons lift and move the TV.

x

Stand the product up and fasten the screws. If you fasten the screws with the TV placed down, it may lean to one side.

Assembling the Holder-Wire stand


English - 5

2011-01-28 오후 11:00:00

Installing the Wall Mount

Preparing before installing Wall-Mount

To install a wall-mount from another manufacturer, use the Holder-Ring.

s s s s s

Installing the Wall Mount Kit

The wall mount kit (sold separately) allows you to mount the TV on the wall.

For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the TV on your own.

Wall Mount Kit Specifications (VESA)

Install your wall mount on a solid wall perpendicular to the floor. Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer for additional information. If you install the TV on a ceiling or slanted wall, it may fall and result in severe personal injury.

✎

NOTE x

Standard dimensions for wall mount kits are shown in the table below. x

Samsung wall mount kits contain, a detailed installation manual and all parts necessary for assembly are provided. x

Do not use screws that do not comply with the VESA standard screw specifications. x

Do not use screws that are longer than the standard length or do not comply with the VESA standard screw specifications. Screws that are too long may cause damage to the inside of the TV set.

x

For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ depending on the wall mount specifications. x

Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents.

x

Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. x

Our 55” model do not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit for this model.

x

Do not mount the TV at more than a 15 degree tilt.

x

Always have two people mount the TV on a wall.

Product Family

TV size in inches

VESA screw hole specs (A * B) in millimeters

Standard Screw Quantity

32~40 200 X 200

LED-TV 46~55 400 X 400

600 X 400

M8 4

60~65

Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.

English - 6


Remote Control Buttons

✎

This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.

Turns the TV on and off.

Displays and selects the available video sources.

Gives direct access to channels.

Press to select additional digital channels being broadcast by the same station. For example, to select channel ‘54-3’, press

‘54’, then press ‘-’ and ‘3’.

Adjusts the volume.

Opens the OSD.

Link to various application services.

Quickly select frequently used functions.

Selects the on-screen menu items and changes the values seen on the menu.

Returns to the previous menu.

Buttons used in the Channel and

SMART HUB menu, etc.

POWER

ON/OFF

SOURCE

1 2 3

4 5 6

7 8 9

0

MUTE

M

PRE-CH

VOL

<

CH

<

CH LIST

HUB

SMART

MENU

m

SEARCH l l

Turns the remote control light on or off. When on, the buttons become illuminated for a moment when pressed.

(Using the remote control with this button set to On will reduce the battery usage time.)

Returns to the previous channel.

Cuts off the sound temporarily.

Changes channels.

Displays channel lists on the screen.

Support to recommendation search word and search function.

Displays information on the TV screen.

Exits the menu.

Use these buttons in SMART HUB and

Anynet+ (HDMI-CEC) modes.

TV

SOCIAL

E-MANUAL ll ll

B

MTS

C

l

D

l l l l

SOCIAL TV : Connect to Social TV application.

MTS : Press to choose stereo, mono, or Separate Audio Program (SAP broadcast).

X: Turns the 3D image on or off.

CC : Displays digital subtitles.

P.SIZE

: Lets you choose the Picture

Size.

E-MANUAL : Displays the e-Manual.

Installing batteries (Battery size: AAA)


✎

NOTE x

Use the remote control within 23 feet from the TV.

x

Bright light may affect the performance of the remote control

Avoid using when near special fluorescent lights or neon signs.

x

The color and shape may vary depending on the model.

English - 7

2011-01-28 오후 11:00:02

2 3

5 6

7 8 9

1

2

3

How to Navigate Menus

Before using the TV, follow the steps below to learn how to navigate the menu and select and adjust different functions.

l

MENU

m l

4

1

MENU button: Displays the main on-screen menu.

2

ENTER E / Direction button: Move the cursor and select an item. Confirm the setting.

l l l l

3

RETURN button: Returns to the previous menu.

4

EXIT button: Exits the on-screen menu.

How to Operate the OSD (On Screen Display)

The access steps may differ depending on the selected menu.

1

MENU The main menu options appear on the screen:

Picture, Sound, Channel,

2

3

▲ / ▼

ENTER E

Network, System, Support.

Select an icon or option with the or ▼ button.

Press ENTER sub-menus.

E to access the

4

▲ / ▼ Select the desired submenu with

▲

5

◄ / ► the

▲ or ▼ button.

Adjust the value of an item with the

◄ or ► button. The adjustment in the OSD may differ depending on the selected menu.

6

ENTER E

Press

ENTER selection.

E to confirm the

7

EXIT e

Press EXIT .

✎

For the best cable connections to this product, be sure to use cables with a maximum thickness of 0.55 inches (14mm.) x

Maximum thickness - 0.55 inches (14mm)

Connecting the power cord and an antenna or cable connection

Connecting the power cord and an antenna or cable connection

When the TV is initially powered on, basic settings proceed automatically.

VHF/UHF Antenna

Cable

ANT OUT

Antenna Cable (Not Supplied) or

Power Input

AVIN 2


English - 8

2011-01-28 오후 11:00:03

Plug & Play (Initial Setup)

When you turn the TV on for the first time, a sequence of on-screen prompts will assist in configuring basic settings. To turn on the TV, press the POWER P button.

✎

Plug & Play is available only when the Source is set to TV.

✎

To return to the previous step in the Plug & Play sequence, select Previous, and then press ENTER

E.

✎

Before turning on the TV, make you have connected the TV to an antenna or cable connection (p. 8).

1

2

Selecting the OSD

Language

Setting the Network

Press the ▲ or ▼ button to select a language. Press ENTER

E twice when done.

Set up your network connection. Press the ENTER

E button to start.

If you do not know your network set up information or want to set to it later, select Skip. We suggest you skip network connection setup now and refer to “Network menu” in the e-Manual for set up requirements and instructions, and the Network Connection section of this manual (Page 15).

You can set up the network connection later using the Network menu.

3

Selecting the usage mode

POWER

P

Press the

▲ or ▼ button to select Home Use, and then press the

ENTER E button twice.

Select the Home Use mode. Store Demo mode is for retail environments.

4

5

Setting the Clock

Mode

Selecting search options for auto tuning

Press the

▲ or ▼ button to select Auto or Manual, and then press

ENTER E twice.

✎

If you selected Auto, you’ll go to the Time Zone and DST screen. Select Time Zone or DST, and then press ENTER E. On the Time Zone screen, use the ▲ or ▼ button to select your zone, and then press ENTER

E. On the DST screen, press,

ENTER E, then select whether to turn DST (Daylight Savings Time) on or off. When done, press ENTER

E.

✎

If you selected Manual, you’ll go to the Date and Time screen. Select Date or Time, and then press ENTER

E. Then, use the number buttons or the ▲ or ▼ button to set the date or time. Use the

◄ or ► button to move between entry fields. When done setting the Date and Time, select Next, and then press ENTER

E.

Press the ▲ or ▼ button to select Air or Cable, and then press

ENTER E. A check appears on your selection. Select Next, and then press the ENTER

E button. You can check both if you have both connected.

✎

If you selected Cable, you’ll go to the Cable System screen. Use the ▲ or ▼ button to select Digital or Analog, and then press.

ENTER E. Use the ▲ or ▼ button to select the correct cable signal format - STD, HRC, or IRC - and then press

ENTER

E. Most cable systems use STD. Select the correct cable signal format for both the Digital and Analog systems.

6

Selecting and memorizing channels

✎

When done, select Next, and the press

ENTER E.

The channel search will start automatically. This can take up to 30 minutes.

For more information, refer to Channel → Auto Program in the e-Manual.

✎

Press the ENTER E button at any time to interrupt the memorization process.

7

Enjoy your TV.

If you want to watch a broadcast program, select Close.

If you want to enjoy Smart Hub, select Smart Hub. Smart Hub will start. For more detailed information, refer to “Smart Hub” in the e-Manual.

If You Want to Rerun Plug & Play...

O

MENU

→ System → Plug & Play →

ENTER E

✎

NOTE y

To change the TV’s setting from Store Demo to Home Use when not in Plug & Play, press the volume button on the TV.

When you see the volume bar on the screen, press and hold the MENU button on the TV for 5 sec.

INFO GUIDE

English - 9


Connecting to an AV Device

Using an HDMI or an HDMI to DVI Cable: HD connection (up to 1080p)

We recommend using the HDMI connection for the best quality HD picture.

Available devices: DVD player,, Blu-ray player, HD cable box, HD STB (Set-Top-Box) satellite receiver

Device

HDMI Cable (Not Supplied)

HDMI OUT

Device

DVI OUT

HDMI to DVI Cable (Not Supplied)

Audio Cable (Not Supplied)

AUDIO OUT

R-AUDIO-L

R W

Red White

✎

HDMI IN 1 (DVI), 2 (ARC), 3, 4 / PC/DVI AUDIO IN x

For better picture and audio quality, connect to a digital device using an HDMI cable.

x

An HDMI cable supports digital video and audio signals, and does not require an audio cable.

– To connect the TV to a digital device that does not support HDMI output, use an HDMI/DVI and audio cables.

x

The picture may not display normally (if at all) or the audio may not work if you connect an external device that uses an older version of HDMI mode is connected to the TV. If such a problem occurs, ask the manufacturer of the external device about the HDMI version and, if out of date, request an upgrade.

x

Be sure to use an HDMI cable with a thickness of 14 mm or less.

x

Be sure to purchase a certified HDMI cable. Otherwise, the picture may not display or a connection error may occur.

x

We recommend using a basic high-speed HDMI cable or and HDMI cable that is Ethernet is compatible. Note that this product does not support the Ethernet function via HDMI.

x

This product supports the 3D and ARC (Audio Return Channel) functions via an HDMI cable. Note that the

ARC function is supported by the HDMI IN 2 (ARC) port only.

x

The ARC function allows digital audio to output via the HDMI IN 2 (ARC) port. It can be enabled only when the

TV is connected to an audio receiver that supports the ARC function.

[UD6500-ZA]BN68-03527A-00Eng.indb 10

English - 10

2011-01-28 오후 11:00:04

Using a Component (up to 1080p) or an Audio/Video (480i only) Cable

Available devices: DVD player, Blu-ray player, cable box, STB satellite receiver, VCR

R W R B G W

W Y

Y

Red White Red Blue Green

Device

Red White Yellow

Device

AUDIO OUT

R-AUDIO-L

R W

VIDEO OUT

Y

AUDIO OUT

R-AUDIO-L

R W

COMPONENT OUT

P

R

P

B

Y

R B G

Component Adapter

(Supplied)

Device

AV Adapter(Supplied)

AUDIO OUT

R-AUDIO-L

VIDEO OUT

Component Cable

(Not Supplied)

Audio Cable

(Not Supplied)

W R Y Audio Cable

(Not Supplied)

Video Cable

(Not Supplied)

W

W

Audio Cable

(Not Supplied)

Red White Yellow

Video Cable

(Not Supplied)

✎

When connecting to

AV IN

, the color of the

AV IN 1 [VIDEO]

jack (green) will not match the video cable (yellow).

✎

For better picture quality, the Component connection is recommended over the A/V connection.

Using an EX-Link Cable Connection

Available Devices: External devices that support EX-Link.

EX-LINK : Connector for service only.

[UD6500-ZA]BN68-03527A-00Eng.indb 11

English - 11

2011-01-28 오후 11:00:05

Connecting to an Audio Device

Using an Optical (Digital) or an Audio (Analog) Cable Connection

Available devices: Digital Audio System, Amplifier, DVD home theater

Amplifier /

DVD home theater

AUDIO IN

R-AUDIO-L


Digital Audio System

OPTICAL

R W

Red White

Optical Cable (Not Supplied)

✎

DIGITAL AUDIO OUT (OPTICAL) x

When you connect a Digital Audio System to the

DIGITAL AUDIO OUT (OPTICAL)

jack, decrease the volume of both the TV and the system.

x

5.1 CH (channel) audio is available when you connect the TV to an external device supporting 5.1 CH.

x

When the receiver (home theater) is set to on, you can hear sound output from the TV’s optical jack. When the

TV is receiving a DTV signal, the TV will send 5.1 CH sound to the home theater receiver. When the source is a digital component such as a DVD player / Blu-ray player / cable box / STB (Set-Top-Box) satellite receiver and and you connected it to the TV via HDMI, you will only hear 2 CH audio from the home theater receiver. If you want to hear 5.1 CH audio, connect the digital audio out jack from your DVD / Blu-ray player / cable box / STB satellite receiver directly to an amplifier or home theater.

✎

AUDIO OUT : Connects to the audio input jacks on your amplifier/DVD home theater.

x

When connecting, use the appropriate connector.

x

When you connect an audio amplifier to the AUDIO OUT jacks, decrease the volume of the TV and adjust the volume level with the amplifier’s volume control.

Connecting to a PC

Using an HDMI cable or an HDMI to DVI cable or a D-sub cable

✎

Your PC may not support an HDMI connection.

HDMI Cable (Not Supplied)

HDMI OUT

HDMI to DVI Cable (Not Supplied)

DVI OUT

AUDIO OUT

AUDIO OUT

PC OUT


D-Sub Cable (Not Supplied)

English - 12


PC Display Modes (D-Sub and an HDMI to DVI Input)

Optimal PC resolution is 1920 X 1080 @ 60 Hz. You can also select one of the standard resolutions listed in the Resolution column. The TV will automatically adjust to the resolution you choose.

Mode

IBM

MAC

VESA DMT

VESA DMT / DTV CEA

Resolution

640 x 350

720 x 400

640 x 480

832 x 624

1152 x 870

640 x 480

640 x 480

640 x 480

800 x 600

800 x 600

800 x 600

1024 x 768

1024 x 768

1024 x 768

1152 x 864

1280 x 1024

1280 x 1024

1280 x 800

1280 x 800

1280 x 960

1360 x 768

1440 x 900

1440 x 900

1680 x 1050

1920 x 1080p

Horizontal Frequency

(KHz)

31.469

31.469

35.000

49.726

68.681

31.469

37.861

37.500

37.879

48.077

46.875

48.363

56.476

60.023

67.500

63.981

79.976

49.702

62.795

60.000

47.712

55.935

70.635

65.290

67.500

Vertical Frequency

(Hz)

70.086

70.087

66.667

74.551

75.062

59.940

72.809

75.000

60.317

72.188

75.000

60.004

70.069

75.029

75.000

60.020

75.025

59.810

74.934

60.000

60.015

59.887

74.984

59.954

60.000

Pixel Clock Frequency

(MHz)

25.175

28.322

30.240

57.284

100.000

25.175

31.500

31.500

40.000

50.000

49.500

65.000

75.000

78.750

108.000

108.000

135.000

83.500

106.500

108.000

85.500

106.500

136.750

146.250

148.500

Sync Polarity

(H / V)

+/-

-/+

-/-

-/-

-/-

-/+

-/+

+/+

+/+

-/+

-/-

+/+

+/+

+/+

+/+

-/+

-/+

-/-

-/-

-/-

+/+

+/+

+/+

-/-

+/+

✎

NOTE x

For HDMI/DVI cable connection, you must use the HDMI IN 1 (DVI) jack.

x

The interlace mode is not supported.

x

The set may operate abnormally if you select a non-standard video format.

x

Separate and Composite modes are supported. SOG (Sync On Green) is not supported.

[UD6500-ZA]BN68-03527A-00Eng.indb 13

English - 13

2011-01-28 오후 11:00:08

Changing the Input Source

Source

Use to select TV or an external input source such as a DVD player / Blu-ray player / cable box / STB satellite receiver.

1. Press the SOURCE

button on your remote.

SOURCE

2. Select a desired external input source.

You can change the view mode among the All and Connected by pressing l the or r button.

■ ■

TV / PC / AV1 / AV2 / COMPONENT /

HDMI1/DVI / HDMI2 / HDMI3 / HDMI4 / USB /

AllShare

✎

You can only choose external devices that are connected to the TV. In Source, connected inputs are highlighted.

✎

In Source, PC always stays activated.

Edit Name

Edit Name lets you associate a device name to an input source. To access Edit Name, press the TOOLS button In

Source. The following selections appear under Edit Name:

■

VCR / DVD / Cable STB / Satellite STB / PVR STB /

AV Receiver / Game / Camcorder / PC / DVI PC / DVI

Devices / TV / IPTV / Blu-ray / HD DVD / DMA: Name the device connected to the input jacks to make your input source selection easier.

✎

If you have connected a PC to the HDMI IN 1 (DVI ) port with an HDMI cable, select PC under Edit Name to enter a device name.

✎

If you have connected a PC to the

HDMI IN 1 (DVI) port with an HDMI to DVI cable, select DVI PC under

Edit Name to enter a device name.

✎

If you connected an AV device to the HDMI IN 1 (DVI) port with an HDMI to DVI cable, select DVI Devices under Edit Name to enter a device name.

Edit Favorites

In Source, press the TOOLS button to select Edit

Favorites. You can set an external input source as a

Favorites.

Information

You can see detailed information about the selected external device.

Refresh

In Source, If the external devices are not displayed, press the TOOLS button to select Refresh, then search for the connected devices.

[UD6500-ZA]BN68-03527A-00Eng.indb 14

English - 14

2011-01-28 오후 11:00:09

Wired/Wireless Network Connection

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless connection.

Network Connection - Wireless

You can connect your TV to your LAN through a standard wireless router or modem.

Wireless IP Sharer

(AP having DHCP Server)

The LAN Port on the Wall

LAN Cable (Not Supplied)

This TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n.

When you play video over a IEEE 802.11b/g connection, the video may not play smoothly.

Most wireless network systems incorporate a security system that requires devices that access the network through an access point or AP (typically a wireless IP Sharer - router or modem) to transmit an encrypted security code called an access key.

If you select Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP

AES (WPS2Mixed) on your AP or wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications.

Configuring the Network Connection - Wireless

The instructions below are for networks that use the Dynamic Host Configuration Protocol (DHCP) to configure network connections automatically. If your have a Static IP network, see your user’s manual for configuration instructions.

To configure your network connection for a network that uses DHCP, follow these steps:

1. Connect your TV to your network as shown in the illustration above.

Network Settings

2. Turn on your TV, press the MENU button on your remote, and the select Network → Network Settings.

Select a network connection type.

3. Select the Wireless (General), press ENTER

E, and then press

ENTER

E again.

Wired

Wireless(General)

Previous

4. The Network function searches for available wireless network.

When done, it displays a list of the available networks.

WPS(PBC)

One Foot Connection

Set up wireless network by selecting your Wireless

Router. you may need to enter security key depending on the setting of the Wireless

Router.

Next

Cancel

5. In the list of networks, press the ▲ or ▼ button to select a networks, select Next, and then press

ENTER E.

6. If you have selected a wireless router that has security, the

Security Key screen appears. Enter the Security key (Security

✎

The displayed imange may differ depending on the model.

Key or PIN), select Next, and then press ENTER

E.

✎

When you enter the Security Key (Security Key or PIN), use

▲/▼/◄/► buttons on your remote to select numbers and characters.

7. The Network Connection screen appears and verifies the network connection. When the connection has been verified, the

“Internet connection successful.” message appears. Network set up is complete.

✎

For more detailed information, see “Wireless Network Connection” in the e-Manual.

[UD6500-ZA]BN68-03527A-00Eng.indb 15

English - 15

2011-01-28 오후 11:00:10

Network Connection - Wired

There are two main ways to connect your TV to your network using cable, depending on your network setup. They are illustrated below:

The Modem Port on the Wall

Extternal Modem

(ADSL / VDSL / Cable TV)

TV Rear Panel

LAN Cable (Not Supplied) Modem Cable (Not Supplied)

The LAN Port on the Wall TV Rear Panel

LAN Cable (Not Supplied)

Configuring the Network Connection - Wired

Most home networks use the Dynamic Host Configuration Protocol (DHCP) to configure network connections. Home networks that support DHCP automatically provide the IP address, subnet mask, gateway, and DNS values your TV needs to access the

Internet so you don’t have to enter them manually.

To configure your network connection for a network that uses DHCP, follow these steps:

1. Connect your TV to your network as shown in one of the illustrations above.

Network Settings

2. Turn on your TV, press the MENU

button on your remote, and then select Network

→ Network Settings. The Network Settings screen will appear.

Select a network connection type.

Wired

3. Select Wired, press ENTER

E, and then press

ENTER

E again.

4. The Network Connection screen appears, and verifies the network connection. When the connection has been verified, the “Internet connection successful.” message appears. Network set up is completed.

Wireless(General)

WPS(PBC)

One Foot Connection

Connect to the network using LAN cable. Please make sure that the

LAN cable is connected.

Previous

Next

Cancel

✎

If your TV cannot acquire network the connection values automatically or if you want to set the connection manually, select IP Settings on the network test screen. Set Internet

✎

The displayed imange may differ depending on the model.

✎

Protocol Setup to Manual. You must enter the IP Address, Subnet Mask, Gateway, and DNS Server manually.

For more detailed information, see “Wired Network Connection” in the e-Manual.

[UD6500-ZA]BN68-03527A-00Eng.indb 16

English - 16

2011-01-28 오후 11:00:11

How to view the e-Manual

E-MANUAL

You can fi nd instructions about your TV’s features in the e-Manual in your

TV. To use, press the

E-MANUAL

button on your remote. Move the cursor using the up/down/right/left buttons to highlight a category, then a topic, and then press the

ENTER E button. The e-Manual displays page you want to see.

You can also access it through the menu:

O

MENU m → Support → e-Manual →

ENTER

E

✎

If you want to return to the e-Manual, press the

E-MANUAL

button on your remote.

✎

You cannot use Try now function if the TV menu is not activated.

Screen Display

TV Screen: Displays the program, movie, video, etc. you are currently watching.

Help: Displays the e-Manual

Guide or Product Guide. Press

ENTER E button.

Help

Basic Features

Changing the Preset Picture Mode

Adjusting Picture Settings

Changing the Picture Size

Changing the Picture Options

Setting up the TV with Your PC

The category list. Press l or r button to select the category you want.

Displays the sub-menu list. Use the arrow buttons on your remote to move the cursor. Press ENTER

E button to select the sub-menu you want.

Index

Index: Displays index screen.

X: Exit the e-Manual.

Using the Help

Display the e-Manual Guide & the Product Guide by pressing Help.

How to view the e-Manual

You can fi nd instructions for your TV’s features in the e-Manual in your TV. To use the e-Manual, press the E-MANUAL button on your remote. Move the cursor using the u/down/right/left buttons to highlight a category, then a topic, and then press the

ENTER E button. The e-Manual displays the page you want to see.

Basic Features


Adjusting Picture Settings

Changing the Picture Size

Changing the Picture Options

Setting up the TV with Your PC

Help Index

You can also access it through the menu:

O

MENU m →

Support → e-Manual → ENTER

E

✎

If you want to return to the e-Manual, press the E-MANUAL button on your remote.

✎

You can not use Try now function if the TV menu is not activated.

Return

<e-Manual Guide>

The e-Manual guide appears as above.

Sync media from multiple devices with AllShare

AllShare™ syncs your digital devices so you can enjoy music, movies and photos from your PC, camera and mobile devices, on your larger TV screen. Connects you to multiple PCs, as well.

<Product Guide>

The product guide appears as above.

Return

[UD6500-ZA]BN68-03527A-00Eng.indb 17

English - 17

2011-01-28 오후 11:00:19

How to toggle between the e-Manual and the corresponding OSD menu(s).

Basic Features > Changing the Preset Picture Mode (5/10)


■

Picture Mode t

Select your preferred picture type.

N In PC mode, you can only select Entertain and Standard.

• Dynamic: Suitable for a bright room.

• Standard: Suitable for a normal environment.

• Natural for LED TV / Relax: Suitable for reducing eye strain.

• Movie: Suitable for watching movies in a dark room.

• Entertain: Suitable for watching movies and games.

Try Now

E-MANUAL

Help Try Now Home Zoom Index

✎

This function is not enabled in some menus.

Picture

Picture Mode

Backlight

Contrast

Brightness

Sharpness

Color

Tint (G/R) G 50

Standard

14

100

45

50

50

R 50

Method 1

1. Select Try Now, if you want to execute the corresponding menu(s).

2. To return to the e-Manual screen, press the E-MANUAL button.

Method 2

1. Press the ENTER E button when a topic is displayed.

“Do you want to execute this?” appears. Select Yes, and then press the

ENTER E button. The OSD window appears.

2. To return to the e-Manual screen, press the E-MANUAL button.

Viewing the Contents

Basic Features > Changing the Preset Picture Mode (5/10)


O

MENU m → Picture → Picture Mode →

ENTER

E

■

Picture Mode t





• Natural

for LED TV

/ Relax: Suitable for reducing eye strain.



Contents Area: Contains the topic contents if you selected a sub-menu. To move to the previous or next page, press the l or r button.

Help Try Now Home Zoom Index

Try Now: Displays the OSD menu that corresponds to the topic. To return to the e-Manual screen, press the e-Manual button

Home: Moves to the e-Manual home screen.

Zoom: Magnifies a screen.

Index: Displays index screen.

[UD6500-ZA]BN68-03527A-00Eng.indb 18

English - 18

2011-01-28 오후 11:00:21

Using the Zoom mode

Select Zoom, and then press ENTER to magnify the

screen. You can scroll through the magnified screen by using the u or d buttons.

✎

To return to the screen to normal size, press the

RETURN E button.


O MENU m → Picture → Picture Mode → ENTER E

■

Picture Mode t





• Natural

for LED TV

/ Relax: Suitable for reducing eye strain.



Return

How to search for a topic on the index page

1. To search for a topic, press the left or right arrow button to select a letter, and then press ENTER

E. The Index displays a list of topics and keywords that begin with the letter yo selected.

2. Press the up or down arrow button to select a character order you want, and then press the ENTER

E button to select a topic you want to see.

3. The e-Manual page with the topic appears.

✎

To close the Index screen, press the RETURN button.

[UD6500-ZA]BN68-03527A-00Eng.indb 19

English - 19

2011-01-28 오후 11:00:22

Troubleshooting

If the TV seems to have a problem, first review this list of possible problems and solutions. Also review the Troubleshooting section in the e-Manual. If none of the troubleshooting tips apply, visit “www.samsung.com,” and then click on Support, or call

Samsung customer service at 1-800-SAMSUNG.

Issues

The TV won’t turn on.

There is no picture/video.

The remote control does not work.

The cable/set top box remote control doesn’t turn the TV on or off, or adjust the volume.

Solutions and Explanations y

Make sure the AC power cord is securely plugged in to the wall outlet and the TV. y

Make sure the wall outlet is working. y

Try pressing the

POWER

button on the TV to make sure the problem is not the remote. If the TV turns on, refer to “Remote control does not work” below.

y

Check the cable connections. Remove and reconnect all cables connected to the

TV and external devices.

y

Set the video outputs of your external devices (Cable/Sat Box, DVD, Blu-ray etc) to match the TV input connections. For example, if an external device’s output is

HDMI, it should be connected to an HDMI input on the TV. y

Make sure your connected devices are powered on. y

Be sure to select the correct input source by pressing the SOURCE button on the remote control. y

Reboot the connected device by unplugging and then reconnecting the device’s power cable.

y

Replace the remote control batteries. Make sure the batteries are installed with their poles (+/–) in the correct direction. y

Clean the sensor’s transmission window on the remote. y

Try pointing the remote directly at the TV from 5~6 feet away.

y

Program the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for the SAMSUNG TV code.

✎

This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.

✎

You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com

→ Support →

Downloads) by USB.

License

List of Features

y

Excellent Digital Interface & Networking: Using its built-in HD digital tuner, you can view non-subscription HD broadcasts without a cable box or STB (Set-Top-Box) satellite receiver.

y

3D: This exciting new feature enables you to view 3D content.

y

SMART HUB: Your Gateway to all your content, integrated in one place

– Provides diverse entertainment choices.

– Lets you control your entertainment life with an easy-to-use, user friendly UI.

– Gives you easy access to diverse Apps, with more being added every day.

– Lets you customize your TV by grouping and sorting Apps to your taste.

y

AllShare™: AllShare™ connects your TV and compatible Samsung mobile phones/devices through a network.

y

Anynet+(HDMI-CEC): Allows you to control all connected Samsung devices that support anynet+ with your Samsung

TV’s remote.

English - 20


Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV. Doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided in the included Safety Flyer with your TV. For added stability and safety, you can purchase and install the anti fall device as described below.

The TV-Holder Kit (Sold Separately):

The parts below are included in the TV Holder kit. In addition, you need to provide a wood screw, screw and molly, or other screw appropriate for the wall or cabinet you intend to secure the TV-Holder string to. We recommend a size M4xL20 wood screw.

TV-Holder (BN96-15753A) Screw (M8 X L19)

Installing the TV-Holder

1. Remove the screw attached to the back of your TV, and then connect the TV-Holder to the TV with the screw included in the TV-Holder Kit that is designated for your TV.

✎

Make sure to use only the appropriate supplied screw. If you use a different screw, you can damage your TV.

2. Firmly fasten the screw you provided (size M4xL20 or similar) to the wall or cabinet where the TV is to be installed.

✎

If you fasten the screw to the wall, we recommend you drive the screw into a stud. If that is not possible, use a molly to anchor the screw.

3. Tie the TV-Holder cord to the screw fastened on the wall or cabinet so that the TV is fixed. See the illustrations below.

✎

Install the TV close to the wall so that it does not fall.

✎

When attaching the TV-Holder cord to the wall, tie the cord level with the ground or slanted downwards for safety purposes.

✎

Check the cord occasionally to make sure it is secure.

✎

Before moving the TV, separate the connected cord first.

4. Verify all connections are properly secured. Periodically check the connections for any sign of fatigue or failure. If you have any doubt about the security of your connections, contact a professional installer.

To purchase the TV-Holder Kit, contact Samsung Customer Care

–

In the United States: 1-800-SAMSUNG (1-800-726-7864)

–

In Canada: 1-800-SAMSUNG (1-800-726-7864)

English - 21


Securing the Installation Space

Keep the required distances between the TV, the wall, and other objects to ensure proper ventilation. Failing to do so may result in a fire or a problem with the TV caused by an increase in its internal temperature.

✎

When using a stand or wall-mount, use parts provided by Samsung Electronics only.

x

If you use parts provided by another manufacturer, it may result in a problem with the product or an injury due to the product falling.

Installation with a stand.

Installation with a wall-mount.

4 inches 4 inches

4 inches 4 inches

4 inches 4 inches

4 inches

Other Warnings

✎

The actual appearance of the TV may differ from the images in this manual, depending on the model.

✎

Be careful when you touch the TV. Some parts can be somewhat hot.

Storage and Maintenance

✎

If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.

Do not spray water or a cleaning agent directly onto the product. Any liquid that goes into the product may cause a failure, fire, or electric shock.

Clean the product with a soft cloth dampened with a small amount of water.

[UD6500-ZA]BN68-03527A-00Eng.indb 22

English - 22

2011-01-28 오후 11:00:24

Specifications

Display Resolution

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

Stand Swivel (Left / Right)

Model Name

Screen Size

(Diagonal)

Sound

(Output)

Dimensions (WxDxH)

Body

1920 x 1080

UN32D6500

32” Class

(31.5” measured diagonally)

50°F to 104°F (10°C to 40°C)

10% to 80%, non-condensing

-4°F to 113°F (-20°C to 45°C)

5% to 95%, non-condensing

-20˚ ~ 20˚

UN40D6500

40” Class


10W X 2

With stand

29.4 X 1.2 X 17.5 inches

(745.8 X 29.9 X 443.4 mm)

29.4 X 9.4 X 19.8 inches

(745.8 X 240.0 X 503.8 mm)

36.7 X 1.2 X 21.6 inches

(933.0 X 29.9 X 548.8 mm)

36.7 X 10.0 X 23.9 inches

(933.0 X 255.0 X 608.2 mm)

Weight

Without Stand

With Stand

Model Name

Screen Size

(Diagonal)

Sound

(Output)

Dimensions (WxDxH)

Body

15.7 Ibs (7.1 kg)

21.6 Ibs (9.8 kg)

UN46D6500

46” Class


10W X 2

22.0 Ibs (10.0 kg)

29.3 Ibs (13.3 kg)

UN55D6500

55” Class


15W X 2

With stand

42.1 X 1.2 X 24.6 inches

(1068.4 X 29.9 X 625.2 mm)

42.1 X 10.8 X 26.9 inches

(1068.4 X 275.0 X 683.6 mm)

49.6 X 1.2 X 28.8 inches

(1258.8 X 29.9 X 731.7 mm)

49.6 X 10.8 X 31.2 inches

(1258.8 X 275.0 X 791.4 mm)

Weight

Without Stand

With Stand

26.5 Ibs (12.0 kg)

35.3 Ibs (16.0 kg)

38.1 Ibs (17.3 kg)

47.4 Ibs (21.5 kg)

✎

Design and specifications are subject to change without prior notice.

✎

This device is a Class B digital apparatus.

✎

For information about the power supply, and more about power consumption, refer to the label attached to the product.

Dispose unwanted electronics through an approved recycler.

To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect Or call, (877) 278 - 0799

[UD6500-ZA]BN68-03527A-00Eng.indb 23

English - 23

2011-01-28 오후 11:00:24

■

Front view / Side view

2

1

Dimensions

3

5

6

7

8

4

Model name

UN32D6500

UN40D6500

UN46D6500

UN55D6500

1

29.4

36.7

42.1

49.6

■

Jack panel detail / Rear view

2

27.7

35.1

40.4

47.9

3

15.7

19.9

22.9

29.4

4

17.5

18.9

19.5

19.5

5

17.5

21.6

24.6

28.8

6

19.8

23.9

26.9

31.2

7

1.2

1.2

1.2

1.2

(Unit: inches)

8

9.4

10.0

10.8

10.8

1

6

5

9

8

7

4

2

3

8

8.0

11.1

12.1

14.0

(Unit: inches)

Model name

UN32D6500

UN40D6500

UN46D6500

UN55D6500

1

7.9

7.9

15.7

15.7

2

7.9

7.9

15.7

15.7

3

19.3

23.2

28.1

33.7

4

3.1

3.7

4.3

4.4

5

1.3

4.1

3.7

4.9

6

12.5

13.0

13.6

14.6

7

2.4

4.0

4.0

4.0

NOTE: All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your TV. Not responsible for typographical or printed errors.

© 2011 Samsung Electronics America, Inc

9

1.6

1.9

2.0

1.9

[UD6500-ZA]BN68-03527A-00Eng.indb 24

English - 24

2011-01-28 오후 11:00:25

This page is intentionally left blank.


Samsung UN40D6500 User manual

LED TV user manual

E-MANUAL

imagine the possibilities

Thank you for purchasing this Samsung product.

To receive more complete service, please register your product at

Model _____________ Serial No. _____________

Important Warranty Information Regarding Television Format Viewing

Still image warning

Accessories

Viewing the Control Panel

Install the Stand

Installing the Wall Mount

Remote Control Buttons

How to Navigate Menus

Connecting the power cord and an antenna or cable connection

Plug & Play (Initial Setup)

INFO GUIDE

Connecting to an AV Device

Connecting to an Audio Device

Connecting to a PC

Changing the Input Source

Wired/Wireless Network Connection

How to view the e-Manual

E-MANUAL

You can fi nd instructions about your TV’s features in the e-Manual in your

TV. To use, press the

E-MANUAL

button on your remote. Move the cursor using the up/down/right/left buttons to highlight a category, then a topic, and then press the

ENTER E button. The e-Manual displays page you want to see.

You can also access it through the menu:

Try Now

E-MANUAL

Troubleshooting

License

List of Features

Securing the TV to the Wall

Securing the Installation Space

Storage and Maintenance

Specifications

Dimensions

This page is intentionally left blank.

Related manuals

Samsung

UE40N5000AU

Samsung

UA43N5000AK

Samsung

UA32N5001AK

Samsung

UN40FH6030

Samsung

LED 8000 series

Samsung

UN55C6500

Samsung

UA49M5000AK

Samsung

UA43M5100DK

Samsung

UA49M5100AK

Samsung

UA40N5000AK

Samsung

UE32C6500UW

Samsung

T24H315HLB

Table of contents

Model _ Serial No. _