EVK 2
EVALUATION KIT
EVALUATION KIT
Product Description
Key Benefits
The Telit Evaluation Kit (EVK2) provides a robust, futureproof and flexible environment to streamline all application
development based on Telit GSM | GPRS, UMTS | HSPA,
CDMA 1x | EV-DO, and LTE module families, significantly
reducing time-to-market.
The Telit EVK2 is a tool designed for engineers,
programmers, and developers who are looking to:
The kit includes a motherboard and an adapter board
where the target module is connected. This concept allows
the EVK2 to be used across various form factors and product generations, both present and future.
The motherboard includes the basic interfaces such as
power input, SIM card holder, audio monitor outputs,
RS-232, and USB; as well as a Reset button and power
switch. The circuit implemented in the EVK2 motherboard
is based on the recommended reference design for the
module’s peripheral components and I/O connections.
Adapter boards are available for all the different module
families. Adapter boards for modules with board-to-board
connectors may be used for development with a number of
different target modules sharing the same form factor.
•Develop and test applications based on current and
future Telit GSM | GPRS, UMTS | HSPA, CDMA 1x | EV-DO
and LTE module families via AT commands through serial
ports
•Program and/or update any Telit module
•Debug and/or Improve applications based on Telit
modules
•Implement simple applications (stand alone function)
by executing scripts with a Python interpreter-equipped
module without the need for an external microprocessor
•Develop a first-pass proof-of-concept device for a
new application
AVAILABLE FOR
EMEA
North America
Latin America
APAC
Korea
Australia
EVK 2
• Debug and/or Improve applications based
on Telit modules
• Implement simple applications (stand alone
function) by executing scripts with a Python
interpreter-equipped module without the
need for an external microprocessor
• Develop a first-pass proof-of-concept device
for a new application without the need fo an
external microprocessor
• RESET & power ON button
• Battery charger control From Telit module
• OV protection on all input DC lines
• Reverse polarity protection on all
input DC lines
• 2 LED indicators
• Microphone lines: 1x Single-ended (INT/EXT)
• Eearpiece output: 1x Single-ended (INT/EXT)
max 10mW/16
Ʊ
• Program and/or update any Telit module
• Speaker output:
2 output power options:
- Option 1 - max 10mW / 16 on
standard 2.5 mm headset socket
- Option 2 - max 675mW / 8 on
PTH pin connector
Ʊ
• Develop and test applications based on
current and future Telit GSM | GPRS,
UMTS | HSPA, CDMA 1x/EV-DO and LTE module families via AT commands through serial
ports
• Serial ports: 2 x RS-232 or 2 x USB
Ʊ
Product features
• General purpose inputs / outputs
ith the EVK2, all general purpose inputs/
W
outputs can be accessed on the adapter
boards by a set of header pins on the PTHtype connector.
This arrangement allows developers to build
their own interface boards best suited for
their requirements, e.g. custom connectors,
cables, relays, LEDs, etc.
• GPIOs (all available on the interface board)
Electrical & Sensitivity
• SIM card holder
• Automatic mute control
• Power supply inputs
Interfaces
• RS-232 / USB 1.1 serial ports
The application communicates with the Telit
module in the EVK2 through two asynchronous serial interface ports (ASC0 and ASC1),
which are embedded in the motherboard as a
double stacked standard
• The EVK2 is equipped with different power
supply inputs enabling its use it in the following environments:
- Automotive setup: 5 to 40 Volt supply
- Laboratory setup: + 3.8 Volt fixed supply
- Portable setup: Rechargeable Li-Ion
battery pack
DB9 connector providing serial communication (RS-232 up to 115 Kbps).
[09.2014]
Alternatively, this communication can be
done through a CMOS HUB at 1.5 Mbps data
rates via USB compliant port. The USB connection is provided through a USB-A USBB
cable. Selection of the serial port is made
through the jumper configuration on the
motherboard.
Telit reserves all rights to this document and the information contained herein. Products, names, logos
and designs described herein may in whole or in part be subject to intellectual property rights.
The information contained herein is provided “as is”. No warranty of any kind, either express or implied,
is made in relation to the accuracy, reliability, fitness for a particular purpose or content of this document.
This document may be revised by Telit at any time. For most recent documents, please visit www.telit.com
Copyright © 2014, Telit
*Copyright © 1990-2014, Python Software Foundation
Telit Communications S.p.A.
Via Stazione di Prosecco, 5/B
I-34010 Sgonico (Trieste), Italy
Phone +39 040 4192 200
Fax
+39 040 4192 383
E-Mail EMEA @ telit.com
Telit Wireless Solutions Inc.
3131 RDU Center Drive, Suite 135
Morrisville, NC 27560, USA
Phone +1 888 846 9773 or +1 919 439 7977
Fax
+1 888 846 9774 or +1 919 840 0337
E-Mail NORTHAMERICA @ telit.com
Telit Wireless Solutions Inc.
Rua Paes Leme, 524, Conj, 126
05424-101, Pinheiros
São Paulo-SP-Brazil
Phone +55 11 3031 5051
Fax
+55 11 3031 5051
E-Mail LATINAMERICA @ telit.com
Join the Telit Technical Forum
For a quicker and more rewarding integration experience join
the Telit Technical Forum. There you can browse the first open
forum covering all m2m topics, get direct support by region
(EMEA, North America, Latin America, APAC), take part in this
quickly growing m2m community and exchange experiences.
Telit Wireless Solutions Co., Ltd.
8th Fl., Shinyoung Securities Bld.
6, Gukjegeumyung-ro8-gil, Yeongdeungpo-gu
Seoul, 150-884, Korea
Phone +82 2 368 4600
Fax
+82 2 368 4606
E-Mail APAC @ telit.com
www.telit.com
www.telit.com/techforum
www.telit.com/facebook
www.telit.com/twitter
">
