Telit Wireless Solutions GE865-QUAD Product Description

PDF

દસ્તાવેજ

જાહેરાત

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Disclaimer

The information contained in this document is the proprietary information of Telit

Communications S.p.A. and its affiliates (“TELIT”).

The contents are confidential and any disclosure to persons other than the officers, employees, agents or subcontractors of the owner or licensee of this document, without the prior written consent of Telit, is strictly prohibited.

Telit makes every effort to ensure the quality of the information it makes available.

Notwithstanding the foregoing, Telit does not make any warranty as to the information contained herein, and does not accept any liability for any injury, loss or damage of any kind incurred by use of or reliance upon the information.

Telit disclaims any and all responsibility for the application of the devices characterized in this document, and notes that the application of the device must comply with the safety standards of the applicable country, and where applicable, with the relevant wiring rules.

Telit reserves the right to make modifications, additions and deletions to this document due to typographical errors, inaccurate information, or improvements to programs and/or equipment at any time and without notice.

Such changes will, nevertheless be incorporated into new editions of this document.

Copyright: Transmittal, reproduction, dissemination and/or editing of this document as well as utilization of its contents and communication thereof to others without express authorization are prohibited. Offenders will be held liable for payment of damages. All rights are reserved.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

1.6.

1.7. Document History

.......................................................................................................... 8

2. The GE865-QUAD

................................................................................................... 9

2.1. Product Overview

........................................................................................................... 9

2.2. Target Market

................................................................................................................ 9

2.3. Product Features

............................................................................................................. 9

3. Product Description

................................................................................................ 13

3.1. Size and 2D mechanical drawing

................................................................................... 13

3.2. Weight

......................................................................................................................... 14

3.3. Environmental requirements

......................................................................................... 14

3.3.1.

Temperature range ............................................................................................................ 14

3.3.2.

RoHS compliance ............................................................................................................. 14

3.4. Operating Frequency

.................................................................................................... 14

3.5. Transmitter output power

.............................................................................................. 15

3.6. Receiver sensitivity

...................................................................................................... 15

3.7. Antenna

....................................................................................................................... 15

3.8. Supply voltage

............................................................................................................. 15

3.9. Power consumption

...................................................................................................... 16

3.10. The user interface

...................................................................................................... 16

3.11. Speech CODEC

........................................................................................................ 16

3.12. SIM Reader

.............................................................................................................. 16

3.13. SMS

......................................................................................................................... 16

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

3.14. Real Time Clock and Alarm

...................................................................................... 17

3.15. Enhanced Measurement Report

.................................................................................. 17

3.16. Data transmission capabilities

.................................................................................... 17

3.17. Local security management

....................................................................................... 17

3.18. Call control

............................................................................................................... 17

3.19. Phonebook

................................................................................................................ 17

3.20. Characters management

............................................................................................. 17

3.21. SIM related functions

................................................................................................ 17

3.22. Call status indication

................................................................................................. 18

3.23. Automatic answer (Voice, Data)

................................................................................ 18

3.24. Supplementary services (SS)

...................................................................................... 18

3.25. Acoustic signaling

..................................................................................................... 18

3.26. Buzzer output

........................................................................................................... 19

3.27. RF Transmission Monitor (RFTXMON)

.................................................................... 19

3.28. RF Transmission Control

........................................................................................... 19

3.29. TTY (Telephone Text)

.............................................................................................. 19

3.30. Logic level specifications

.......................................................................................... 19

3.31. Audio

....................................................................................................................... 19

3.31.1.

Analog ............................................................................................................................. 19

3.31.2.

Digital ............................................................................................................................. 19

3.32. Serial Ports

............................................................................................................... 19

3.33. Converters

................................................................................................................ 20

3.33.1.

ADC Converter ................................................................................................................ 20

3.33.2.

DAC Converter ................................................................................................................ 20

3.34. Mounting the GE865-QUAD on your Board

............................................................... 20

3.35. Packing system

......................................................................................................... 20

4. Evaluation Kit

....................................................................................................... 21

5. Software Features

.................................................................................................. 22

5.1. Easy GPRS Extension

................................................................................................... 22

5.1.1.

Overview ......................................................................................................................... 22

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

5.2. Multisocket

.................................................................................................................. 22

5.3. Jamming Detection

....................................................................................................... 23

5.3.1.

Overview ......................................................................................................................... 23

5.4. CMUX

......................................................................................................................... 23

5.4.1.

Architecture ..................................................................................................................... 23

5.4.2.

Features ........................................................................................................................... 23

5.5. Easy Script Extension - Python interpreter

..................................................................... 24

5.5.1.

Overview ......................................................................................................................... 24

5.5.2.

Python 1.5.2+ Copyright Notice ........................................................................................ 25

5.6. SAP: SIM Access Profile

.............................................................................................. 25

5.6.1.

Architecture ..................................................................................................................... 25

5.6.2.

Implementation features .................................................................................................... 26

5.6.3.

Remote SIM Message Command Description ..................................................................... 26

5.7. Premium FOTA Management (PFM) Service

................................................................ 27

5.7.1.

FOTA (Firmware Over The Air) ........................................................................................ 27

5.8. AT Commands

............................................................................................................. 28

6. Conformity Assessment Issues

................................................................................. 29

6.1. RoHS Certificate

.......................................................................................................... 31

6.2. GE865-QUAD CE Conformity Assessment

................................................................... 32

6.3. GE865-QUAD FCC Conformity Assessment

................................................................. 34

6.4. GE865-QUAD IC Conformity Assessment

.................................................................... 35

7. SAFETY RECOMMENDATIONS

........................................................................... 36

8. List of acronyms

.................................................................................................... 37

1.

1.1.

1.2.

1.3.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Introduction

Scope

Scope of this document is giving an overview of the Telit GE865-QUAD module, which is a very small GSM/GPRS module with data and voice capabilities.

Audience

This document is intended for customers who are evaluating the GE865-QUAD.

Contact Information, Support

For general contact, technical support, to report documentation errors and to order manuals, contact Telit’s Technical Support Center (TTSC) at:

[email protected]

Alternatively, use: http://www.telit.com/en/products/technical-support-center/contact.php

For detailed information about where you can buy the Telit modules or for recommendations on accessories and components visit: http://www.telit.com

To register for product news and announcements or for product questions contact Telit's

Technical Support Center (TTSC).

Our aim is to make this guide as helpful as possible. Keep us informed of your comments and suggestions for improvements.

Telit appreciates feedback from the users of our information.

1.4.

1.5.

1.6.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Document Organization

This document contains the following chapters:

“Chapter 1: “Introduction” provides a scope for this document, target audience, contact and support information, and text conventions.

“Chapter 2: “The GE865-QUAD” gives an overview of the features of the product.

“Chapter 3: “Product Description” describes in details the characteristics of the product.

“Chapter 4: “Evaluation Kit” provides some basic information about the Evaluation Kit.

“Chapter 5: “Software Features” provides an overview of the software features of the products.

“Chapter 6: “Conformity Assessment Issues” provides some fundamental hints about the conformity assessment that the final application might need.

“Chapter 7: “Safety Recommendation” provides some safety recommendations that must be follow by the customer in the design of the application that makes use of the GE865.

Text Conventions

Danger – This information MUST be followed or catastrophic equipment failure or bodily injury may occur.

Caution or Warning – Alerts the user to important points about integrating the module, if these points are not followed, the module and end user equipment may fail or malfunction.

Tip or Information – Provides advice and suggestions that may be useful when integrating the module.

All dates are in ISO 8601 format, i.e. YYYY-MM-DD.

1.7.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Document History

Revision Date

2009-02-16

2009-06-12

2009-07-17

2009-10-08

2010-10-22

2013-04-22

2013-09-05

Changes

First issue

DVI added

Update of power consumption data

FAX removed

Update on packing system

TTY support added

SMS over GPRS added

Multiple audio settings added

3GPP Release 4 compliance added

CSD transparent data removed

GERAN feature package 1 added

DARP/SAIC added

GSM, 8859-1 and UCS2 character sets added

Jamming Detection reviewed

ICMP protocol support added

SPI support removed

SIM Toolkit 3GPP reference spec added

NACC, Extended TBF added

Conformity Assessment Issues updated

RoHS certificate added

Safety Recommendations updated

Sensitivity updated

Power consumption figures updated

Enhanced Measurement Report added

Updated §6 about conformity assessment

Updated current consumption

Updated Chapter 6 Conformity

Assessment Issues

Amended reel quantity

Location

Trieste

2.

2.1.

2.2.

2.3.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

The GE865-QUAD

Product Overview

The new GE865-QUAD product introduces the smallest GSM/GPRS Ball-Grid-Array (BGA) module in the market.

The GE865-QUAD extends Telit’s range of BGA products, incorporating a single-chip solution built on 0.13 μm CMOS technology into a 22 x 22 x 3 mm block.

The low profile and small size of the unique BGA package for the GE865-QUAD enable the design of extremely compact applications. Since connectors are eliminated, the solution cost is significantly reduced compared to conventional mounting.

With its ultra-compact design and extended temperature range, the Telit GE865-QUAD product is the perfect platform for high-volume m2m applications and mobile data devices.

Additional features such as integrated TCP/IP protocol stack and serial multiplexer extend functionality of the application at no additional cost.

The GE865-QUAD makes it possible to run the customer's application inside the module using Python Script Interpreter, thus making it the smallest, complete platform for m2m solutions.

The GE865-QUAD module, support Over-the-Air firmware update by means Premium FOTA

Management. By embedding the RedBend’s vCurrent Mobile® agent, a proven and battletested technology powering hundreds of millions of cellular handsets world-wide, Telit is able to update its products by transmitting only a delta file, which represents the difference between one firmware version and another.

Target Market

The GE865-QUAD is designed and developed for the usage in applications such as:

• Telemetry

• Telematics

• Security alarms

• Automated Meter Reading (AMR)

• POS terminals

• PDAs and Mobile Computing

• Automotive and Fleet Management applications

Product Features

• Quad-band EGSM 850 / 900 / 1800 / 1900 MHz

• GSM/GPRS protocol stack 3GPP Release 4 compliant

• Output power

- Class 4 (2W) @ 850 / 900 MHz

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

- Class 1 (1W) @ 1800 / 1900 MHz

• Control via AT commands according to 3GPP 27.005, 27.007 and Telit custom AT commands

• Control via Remote AT commands

• Power consumption (typical values)

- Power off: ‹ 62 uA

- Idle (registered, power saving): 1.5 mA @ DRX=9

• Serial port multiplexer 3GPP 27.010

• SIM Application Toolkit 3GPP TS 51.014

• SIM Access Profile

• Extended Supply voltage range: 3.22 – 4.5 V DC (3.8 V DC nominal)

• TCP/IP stack access via AT commands

• Sensitivity:

≤- 107 dBm (typ.) @ 850 / 900 MHz

≤- 106 dBm (typ.) @ 1800 / 1900 MHz

• DARP/SAIC support

• Enhanced Measurement Report support

• Dimensions: 22 x 22 x 3 mm

• Weight: 3.2 grams

• Extended temperature range

-40°C to +85°C (operational)

-40°C to +85°C (storage temperature)

• RoHS compliant

Interfaces

• 10 I/O ports maximum

• Analog audio (balanced)

• Digital Voice Interface

• 2 A/D plus 1 D/A converters

• Buzzer output

• ITU-T V.24 serial link through CMOS UART:

- Baud rate from 300 to 115.200 bps

- Autobauding up to 115.200 bps

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Audio

• Telephony, emergency call

• Half rate, full rate, enhanced full rate and adaptive multi rate voice codecs (HR, FR,

EFR, AMR)

• Superior echo cancellation & noise reduction

• Multiple audio profiles pre-programmed and fully configurable

• DTMF

Approvals

• Fully type approved conforming with R&TTE directive

• CE, GCF, FCC, PTCRB, IC

SMS

• Point-to-point mobile originated and mobile terminated SMS

• Concatenated SMS supported

• SMS cell broadcast

• Text and PDU mode

• SMS over GPRS

Circuit switched data transmission

• Asynchronous non-transparent CSD up to 9.6 kbps

• V.110

GPRS data

• GPRS class 10

• Mobile station class B

• Coding scheme 1 to 4

• PBCCH support

• GERAN Feature Package 1 support (NACC, Extended TBF)

GSM Supplementary Services

• Call forwarding

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

• Call barring

• Call waiting & call hold

• Advice of charge

• Calling line identification presentation (CLIP)

• Calling line identification restriction (CLIR)

• Unstructured supplementary services mobile originated data (USSD)

• Closed user group

Additional features

• SIM phonebook

• Fixed dialling number (FDN)

• Real Time Clock

• Alarm management

• Network LED support

• IRA, GSM, 8859-1 and UCS2 character sets

• Jamming detection

• Embedded TCP/IP stack, including TCP, IP, UDP, SMTP, ICMP and FTP protocols

• EASY SCAN ® automatic scan over GSM frequencies (also without SIM card)

Python* application resources

• Python* script interpreter (module takes the application code directly in the Python* language)

• Memory: 800 kB of NV memory for the user scripts and 1 MB RAM for the Python* engine usage

• Over-the-air application SW update

[

3.

3.1.

Product Description

Size and 2D mechanical drawing

The Telit GE865-QUAD module overall dimensions are:

• Length: 22 mm

• Width: 22 mm

• Thickness: 3 mm

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

3.2.

3.3.

3.3.1.

3.3.2.

3.4.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Weight

The weight of the GE865-QUAD is 3.2 grams.

Environmental requirements

Temperature range

Operating

Temperature Range

Storage and non operating Temperature

Range

Note

–20°C ÷ +55°C

–40°C ÷ +85°C

The module is fully functional(*) in all the temperature range, and it fully meets the 3GPP specifications.

The module is fully functional (*) in all the temperature range.

(*) Functional: the module is able to make and receive voice calls, data calls, SMS and make GPRS traffic.

RoHS compliance

As a part of Telit’s corporate policy of environmental protection, the GE865-QUAD product comply to the RoHS (Restriction of Hazardous Substances) directive of the European Union

(EU Directive 2002/95/EG).

Operating Frequency

The operating frequencies in GSM, DCS, PCS modes are conform to the GSM specifications.

Mode

GSM 850

EGSM 900

DCS-1800

PCS-1900

Freq. TX (MHz) Freq. RX (MHz)

824.2÷848.8 869.2÷893.8

890.0 - 914.8

880.2 - 889.8

935.0 - 959.8

925.2 - 934.8

1710.2 - 1784.8

1850.2 - 1909.8

1805.2 - 1879.8

1930.2 - 1989.8

Channels (ARFC)

124 ÷ 251

0 ÷ 124

975 ÷ 1023

512 ÷ 885

512 ÷ 810

TX - RX offset

45 MHz

95 MHz

80 MHz

3.5.

3.6.

3.7.

3.8.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Transmitter output power

The GE865-QUAD transceiver modules in GSM–850/900 operating mode is class 4 in accordance with the specifications which determine the nominal 2W peak RF power

(+33dBm) on 50 Ohm. In the DCS–1800/PCS–1900 bands, the operating mode is class 1 in accordance with the specifications which determine the nominal 1W peak RF power

(+30dBm) on 50 Ohm.

Receiver sensitivity

Sensitivity of GE865-QUAD module in GSM 850/900 bands is better than –107 dBm (2.4%

BER Class II - static channel) in normal operating conditions.

Sensitivity of GE865-QUAD module in GSM 1800/1900 bands is better than –106 dBm

(2.4% BER Class II - static channel) in normal operating conditions.

The GE865-QUAD supports also the Downlink Advance Receiver Performance (DARP) feature for single antenna interference cancellation (SAIC).

Antenna

The antenna that the customer chooses to use should fulfill the following requirements:

Frequency range Depending by frequency band(s) provided by the network operator, the customer shall use the most suitable antenna for that/those band(s).

Bandwidth 80 MHz in EGSM 900, 70 MHz if GSM 850, 170 MHz in DCS, 140

MHz PCS band

For further information please refer to the GE865-QUAD Hardware User Guide.

Supply voltage

The external power supply must be connected to VBATT signal and must fulfill the following requirements:

Nominal Supply Voltage

Normal Operating Voltage Range

3.8 V

3.4 V – 4.2 V

Extended Operating Voltage Range (*) 3.22 V – 4.5 V

(*) Please refer to the GE865-QUAD Hardware User Guide for using the product with the extended operating voltage range.

3.9.

3.10.

3.11.

3.12.

3.13.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Power consumption

The current consumptions of the Telit GE865-QUAD in power-off and idle are:

Power off current typical (RTC running)

< 62 μA;

Idle registered, power saving 1.5 mA @ DRX=9 (AT+CFUN=5)

Please check the HW User Guide for further details about all other power consumption figures.

The user interface

The user interface is managed by AT commands according to ITU-T V.250, 3GPP 27.007 and

27.005 specifications. Moreover, custom AT commands are also available. Please refer to the

AT Command User Guide for details.

Speech CODEC

The GE865-QUAD supports the following voice codec:

• HR - Half Rate

• FR - Full Rate

• EFR - Enhanced Full Rate

• AMR-HR, AMR Half Rate

• AMR-FR, AMR Full Rate

SIM Reader

The GE865-QUAD supports phase 2 SIM at 1.8V and 3V ONLY with an external SIM connector. For 5V SIM, an external level translator can be added.

SMS

The GE865-QUAD supports the following SMS types:

• Mobile Terminated (MT) class 0 – 3 with signaling of new incoming SMS, SIM full,

SMS read

• Mobile Originated class 0 – 3 with writing, saving in SIM and sending

• Cell broadcast compatible with CB DRX with signaling of new incoming SMS.

The GE865-QUAD also supports SMS over GPRS

3.14.

3.15.

3.16.

3.17.

3.18.

3.19.

3.20.

3.21.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Real Time Clock and Alarm

The GE865-QUAD supports the Real Time Clock and Alarm functions through AT commands. An alarm output pin can be configured to indicate the alarm with a hardware line output.

Furthermore the Voltage Output of the RTC power supply is provided so that a backup capacitor can be added externally to increase the RTC autonomy.

Enhanced Measurement Report

The GE865-QUAD supports the Enhanced Measurement Report on SACCH channel according to 3GPP TS 44.018 version 4.22.0 Release 4 (par. 3.4.1.2, 9.1.54, 9.1.55) and 3GPP

TS 45.008 version 4.17.0 Release 4 (par. 8.4.8).

Data transmission capabilities

The Telit GE865-QUAD is a mobile station class B supporting GPRS Class 10, coding schemes 1 to 4 and PBCCH. Moreover, it supports GERAN feature package 1, which consist in supporting the Extended Uplink TBF and Network Assisted Cell Change (NACC).

As for circuit switched data, the GE865-QUAD supports asynchronous non-transparent data up to 9.6 Kbps. Moreover, it supports the V.110.

Local security management

The local security management can be done with the lock of Subscriber Identity module

(SIM). The security code will be requested at power–up.

Call control

The call cost control function is supported.

Phonebook

This function allows the storing of the telephone numbers in SIM memory. The capability depends on SIM version and its embedded memory.

Characters management

The GE865-QUAD supports the IRA, GSM, 8859-1 and UCS2 characters sets, in TEXT and

PDU mode.

SIM related functions

Fixed Dialing Numbers (FDN), Abbreviated Dialing Number (ADN) and PIN insertion are supported

Extension at the PIN2 for the PUK2 insertion capability for lock condition is supported too.

3.22.

3.23.

3.24.

3.25.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Call status indication

The call status indication is supported.

Automatic answer (Voice, Data)

The automatic answer is supported. The user/application can specify the number of rings after which the module will automatically answer.

The user/application can set the number of rings by means of the command ATS0=<n>.

Supplementary services (SS)

The following supplementary services are supported:

• Call Barring,

• Call Forwarding,

• Calling Line Identification Presentation (CLIP),

• Calling Line Identification Restriction (CLIR),

• Call Waiting, other party call Waiting Indication,

• Call Hold, other party Hold / Retrieved Indication,

• Closed User Group supplementary service (CUG),

• Advice of Charge,

• Unstructured SS Mobile Originated (MO)

Acoustic signaling

The acoustic signaling of the GE865-QUAD on the selected acoustic device are the following:

• Call waiting;

• Ringing tone;

• SMS received tone;

• Busy tone;

• Power on/off tone;

• Off Hook dial tone;

• Congestion tone;

• Connected tone;

• Call dropped;

• No service tone;

• Alarm tone.

3.26.

3.27.

3.28.

3.29.

3.30.

3.32.

3.31.

3.31.1.

3.31.2.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Buzzer output

A general purpose I/O pin can be configured to output the BUZZER output signal. With an external MOSFET or transistor and a diode, a buzzer can be directly driven.

The ringing tone and the other signaling tones can be redirected to this buzzer output with a specific AT command.

RF Transmission Monitor (RFTXMON)

As alternate function of the GPIO5, the GE865-QUAD can provide the RF transmission monitor. When the alternate function is activated, the pin of GPIO5 changes to HIGH every time the module transmits an RF signal and remains HIGH for the duration of the transmission sequence, i.e. it does not change with every GSM signal burst.

RF Transmission Control

As alternate function of the GPIO4 pin, when configured as RF Transmission Control Input, it allows to disable the Transmitter when the GPIO is set to Low by the application.

TTY (Telephone Text)

The TTY feature is supported. Please refer to 3GPP TS 26.226 and 3GPP TS 26.231 for details.

Logic level specifications

Where not specifically stated, all the interface circuits work at 2.8V CMOS logic levels. To get more detailed information about the logic level specifications used in the GE865-QUAD, please check with the Hardware User Guide.

Audio

Analog

The GE865-QUAD offers one audio line balanced. The GE865-QUAD has a built-in echo canceller and a noise suppressor. For more details, please refer to the GE865-QUAD

Hardware User Guide.

Digital

The GE865-QUAD offers the digital voice interface. For more details, please refer to the

Digital Voice Interface Application Note.

Serial Ports

Two serial ports are available on the module:

• Main serial port (full RS232), auto-bauding up to 115,200 bps

• AUX serial port (RX & TX only), 115,200 bps

3.33.

3.33.1.

3.33.2.

3.34.

3.35.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Converters

ADC Converter

The GE865-QUAD has two on board ADC, which are 11-bit converter. They are able to read a voltage level in the range of 0÷2 volts applied on the ADC pin input, store and convert it into 11 bit word.

DAC Converter

The GE865-QUAD has one on board DAC, which is a 10 bit converter, able to generate an analogue value based a specific input in the range from 0 up to 1023. However, an external low-pass filter is necessary. See the HW User Guide for the details.

Mounting the GE865-QUAD on your Board

The Telit GE865-QUAD module has been designed in order to be compliant with a standard lead-free SMT process. For detailed information about PCB pad design and conditions to use in SMT process please check with the GE865-QUAD Hardware User Guide.

Packing system

The Telit GE865-QUAD is supplied on trays of 50 pieces each or, in Tape&Reel of 200 pcs per reel.

4.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Evaluation Kit

In order to assist the customer in the development of the application, Telit offers the EVK2

Evaluation Kit that can be ordered separately. The EVK2 has a SIM card holder, the RS 232 serial port level translator, a direct UART connection, audio and antenna connector.

The EVK2 provides a fully functional solution for a complete data or phone application. The standard serial RS232 9 pin connector placed on the Evaluation Kit allows the connection of the EVK2 system with a PC or other DTE.

The development of the applications utilizing the Telit GE865-QUAD module must present a proper design of all the interfaces towards and from the module (e.g. power supply, audio paths, level translators), otherwise a decrease in the performances will be introduced or, in the worst case, a wrong design can even lead to an operating failure of the module.

In order to assist the hardware designer in his project phase, the EVK2 board presents a series of different solutions, which will cover the most common design requirements on the market, and which can be easily integrated in the OEM design as building blocks or can be taken as starting points to develop a specific one.

For a detailed description of the Telit Evaluation Kit, please refer to the documentation provided with the Telit GE865-QUAD Hardware User Guide and EVK2 User Manual.

5.

5.1.

5.1.1.

5.2.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Software Features

Easy GPRS Extension

Overview

The Easy GPRS feature allows the Telit GE865-QUAD user to contact a device in internet and establish with it a raw data flow over the GPRS and Internet networks.

This feature can be seen as a way to obtain a "virtual" serial connection between the

Application Software on the Internet machine involved and the controller of the Telit GE865-

QUAD module, regardless of all the software stacks underlying.

Local

Application

V i i r r t t u a l l S e r i i a l l L i i n k

Remote

Application

EASY

GPRS

Serial Line

Driver

EASY

GPRS

Data on

Board

V. 24

Telit‘s

Module

TCP/UDP

N e t t w o r r k I I n t t e r w o r k i i n g

IP IP

TCP/UDP

V. 24

Controller

Device

GPRS Network and Internet

Remote

Device

This particular implementation allows to the devices interfacing to the Telit GE865-QUAD module the use of the GPRS and Internet packet service without the need to have an internal

TCP/IP stack since this function is embedded in the module.

For more detailed information regarding the use of the Easy GPRS feature, please consult

Easy GPRS User Guide and AT Commands Reference Guide.

Multisocket

The multisocket is an extension of Telit Easy GPRS feature, which allows the user to have two contexts activated (that means two different IP address), more than one socket connection

(with a maximum of 6) and simultaneous FTP client service.

For more detailed information please consult the Easy GPRS User Guide.

5.3.

5.3.1.

5.4.

5.4.1.

5.4.2.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Jamming Detection

Overview

The Jammed Detect feature allows the GE865-QUAD to detect the presence of a disturbing device such as a Communication Jammer and give indication to the user.

This feature can be very important in alarm, security and safety applications that rely on the module for the communications. In these applications, the presence of a Jammer device can compromise the whole system reliability and functionality and therefore shall be recognized and reported to the local system for countermeasure actions.

CMUX

CMUX (Converter-Multiplexer) is a multiplexing protocol implemented in the GE865-

QUAD that can be used to send any data, SMS, or TCP data.

Architecture

The Multiplexer mode enables one serial interface to transmit data to four different customer applications. This is achieved by providing four virtual channels using a Multiplexer (MUX).

This is especially advantageous when a data/GPRS call is ongoing. Using the Multiplexer features, e.g. controlling the module or using the SMS service can be done via the additional channels without disturbing the data flow; access to the second UART is not necessary.

Furthermore, several accesses to the module can be created with the Multiplexer. This is of great advantage when several independent electronic devices or interfaces are used.

To access the three virtual interfaces, both the GSM engine and the customer application must contain MUX components, which communicate over the multiplexer protocol.

In Multiplexer mode, AT commands and data are encapsulated into packets. Each packet has channel identification and may vary in length.

Features

• 3GPP 27.010 CMUX Basic Option used

• CMUX implementation support four full DLCI (Serial Port)

• Every CMUX instance has its own user profile storage in NVM

• Independent setting of unsolicited message.

• Every CMUX instance has its own independent flow control

NOTE: More details about the Multiplexer mode are available in the CMUX User Guide.

5.5.

5.5.1.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Easy Script Extension - Python interpreter

Overview

The Easy Script Extension is a feature that allows driving the modem "internally", writing the controlling application directly in a nice high level language: Python.

The Easy Script Extension is aimed at low complexity applications where the application was usually done by a small microcontroller that managed some I/O pins and the GE865-QUAD through the AT command interface.

A schematic of such a configuration can be:

E R

F L A S H R O M

G E 8 6 5

P H Y S I C A

S E R I I A L

P r

G o

S t

M o c

G l

R t a

S k

F L A S H a c k m

R O M e m o r y y

A T c o m m a n d s

G P R S M

E N G I I

E M

R A M

P r o t

M m

A o

G t o c o l l e f f

P o

P m

S r

R t t a

S c k

H A R D W A R E R E S O U R C E S

In order to not use any external controller, and further simplify the programming of the sequence of operations, the customer can benefit of these feature already embedded in the

GE865:

• Python script interpreter engine v. 1.5.2+

• 800 kB of Non Volatile Memory room for the user scripts and data

• 1 MB RAM reserved for Python engine usage

5.5.2.

5.6.

5.6.1.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Python 1.5.2+ Copyright Notice

The Python code implemented into the Telit module is copyrighted by Stichting

Mathematisch Centrum, this is the license:

Permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the names of Stichting Mathematisch Centrum or CWI or

Corporation for National Research Initiatives or CNRI not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission.

While CWI is the initial source for this software, a modified version is made available by the

Corporation for National Research Initiatives (CNRI) at the Internet address ftp://ftp.python.org.

STICHTING MATHEMATISCH CENTRUM AND CNRI DISCLAIM ALL

WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL

STICHTING MATHEMATISCH CENTRUM OR CNRI BE LIABLE FOR ANY SPECIAL,

INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER

RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION

OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF

OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

NOTE: More details about the Python modules are available in the Easy Script in Python

User Guide.

SAP: SIM Access Profile

Architecture

The SAP feature allows the module to use the SIM of a remote SIM Server. This feature is implemented using special AT Command on a Virtual circuit of the CMUX interface.

5.6.2.

5.6.3.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Implementation features

• SAP is based on 3GPP 27.010 CMUX Basic Option used

• Only SAP Client features

• Logic HW flow control is recommended on the Virtual instance selected for the SAP command.

Remote SIM Message Command Description

The module sends request commands to the client application through a binary message that is crowned in the CMUX message. The client application shall extract the message and send it to the SAP server, through the appropriate protocols (e.g. by RFCOMM, that is the Bluetooth serial port emulation entity).

The client application shall extract all the messages sent by SAP server and put them in the

CMUX message, to be sent to the module.

The module fulfill the following feature requirements:

• Connection management

• Transfer APDU

• Transfer ATR

• Power SIM on

• Report Status

• Error Handling

5.7.

5.7.1.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Every feature needs some procedures support:

Feature

Connection Management

Transfer APDU

Transfer ATR

Power SIM on

Report Status

Error Handling

Procedure

Connect

Report Status

Transfer ATR

Disconnection Initiated by the Client

Disconnection Initiated by the Server

Transfer APDU

Transfer ATR

Power SIM on

Transfer ATR

Report Status

Error Response

Report Status, Disconnection Initiated by the Server and Error Response are independent messages sent by server. The other procedures consist of couples of messages, started by client.

NOTE: More details about the SAP are available in the SAP User Guide.

Premium FOTA Management (PFM) Service

The premium FOTA Management Service provides a cost-effective, fast, secure and reliable way for wirelessly reflashing the firmware on mobile devices, ensuring that embedded software is up-to-date with the latest enhancements and features.

Customers, who want to benefit from this service, must pass through the Telit certification program, where Telit will assist the customer in validating the correct implementation of

FOTA.

FOTA (Firmware Over The Air)

Telit, which has signed a partnership agreement with the worldwide leader of Firmware OTA technology Red Bend, has integrated its unique vCurrent® Mobile client software for use in its m2m product portfolio. Telit is therefore able to upgrade its products by transmitting only a delta file, which represents the difference between one firmware version and another.

See “PFM Application Note” for details in www.telit.com

> Product > GSM/GPRS > Product

Family > Application Notes.

5.8.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

AT Commands

The Telit GE865-QUAD module can be driven via the serial interface using the standard AT commands.

The Telit GE865-QUAD module is compliant with:

Hayes standard AT command set, in order to maintain the compatibility with existing

SW programs.

3GPP 27.007 specific AT command and GPRS specific commands.

3GPP 27.005 specific AT commands for SMS (Short Message Service) and CBS

(Cell Broadcast Service)

Moreover the GE865-QUAD module supports also Telit proprietary AT commands for special purposes.

For a more information about AT commands supported by the GE865-QUAD module please refer to document AT Commands Reference Guide.

6.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

Conformity Assessment Issues

The Telit GE865-QUAD has been assessed in order to satisfy the essential requirements of the R&TTE Directive 1999/05/EC (Radio Equipment & Telecommunications Terminal

Equipments) to demonstrate the conformity against the harmonized standards with the final involvement of a Notified Body.

0889

By using our certified module, the evaluation under Article 3.2 of the R&TTE is considerably reduced, allowing significant savings in term of cost and time in the certification process of the final product.

In all cases the assessment of the final product must be made against the Essential requirements of the R&TTE Directive Articles 3.1(a) and (b), Safety and EMC respectively, and any relevant Article 3.3 requirements.

This Product Description, the Hardware User Guide and Software User Guide contain all the information you may need for developing a product meeting the R&TTE Directive.

Furthermore the GE865-QUAD module is FCC Approved as module to be installed in other devices. This device is to be used only for fixed and mobile applications. If the final product after integration is intended for portable use, a new application and FCC is required.

The GE865-QUAD is conforming to the following US Directives:

• Use of RF Spectrum. Standards: FCC 47 Part 24 (GSM 1900)

• EMC (Electromagnetic Compatibility). Standards: FCC47 Part 15

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

To meet the FCC's RF exposure rules and regulations:

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

• The system antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all the persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

• The system antenna(s) used for this module must not exceed 1.4dBi (850MHz) and

3.0dBi (1900MHz) for mobile and fixed or mobile operating configurations.

• Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Manufacturers of mobile, fixed or portable devices incorporating this module are advised to clarify any regulatory questions and to have their complete product tested and approved for

FCC compliance.

6.1. RoHS Certificate

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

6.2.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

GE865-QUAD CE Conformity Assessment

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

6.3.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

GE865-QUAD FCC Conformity Assessment

6.4.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

GE865-QUAD IC Conformity Assessment

7.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

SAFETY RECOMMENDATIONS

READ CAREFULLY

Be sure the use of this product is allowed in the country and in the environment required. The use of this product may be dangerous and has to be avoided in the following areas:

• Where it can interfere with other electronic devices in environments such as hospitals, airports, aircrafts, etc

• Where there is risk of explosion such as gasoline stations, oil refineries, etc

It is responsibility of the user to enforce the country regulation and the specific environment regulation.

Do not disassemble the product; any mark of tampering will compromise the warranty validity.

We recommend following the instructions of the hardware user guides for a correct wiring of the product. The product has to be supplied with a stabilized voltage source and the wiring has to be conforming to the security and fire prevention regulations.

The product has to be handled with care, avoiding any contact with the pins because electrostatic discharges may damage the product itself. Same cautions have to be taken for the

SIM, checking carefully the instruction for its use. Do not insert or remove the SIM when the product is in power saving mode.

The system integrator is responsible of the functioning of the final product; therefore, care has to be taken to the external components of the module, as well as of any project or installation issue, because the risk of disturbing the GSM network or external devices or having impact on the security. Should there be any doubt, please refer to the technical documentation and the regulations in force.

Every module has to be equipped with a proper antenna with specific characteristics. The antenna has to be installed with care in order to avoid any interference with other electronic devices and has to guarantee a minimum distance from the body (20 cm). In case of this requirement cannot be satisfied, the system integrator has to assess the final product against the SAR regulation.

The European Community provides some Directives for the electronic equipments introduced on the market. All the relevant information’s are available on the European Community website: http://ec.europa.eu/enterprise/rtte/dir99-5.htm

The text of the Directive 99/05 regarding telecommunication equipments is available, while the applicable Directives (Low Voltage and EMC) are available at: http://ec.europa.eu/enterprise/electr_equipment/index_en.htm

8.

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

List of acronyms

ITU

IWF

LCD

LED

MMI

OEM

PDU

PIN

ETSI

FTA

GPRS

GSM

IMEI

IMSI

IRA

DCE

DRX

DSR

DTA

DTE

DTMF

DTR

EMC

ACM

ASCII

CBS

CCM

CLIP

CLIR

Accumulated Call Meter

American Standard Code for Information Interchange

Attention commands

Cell Broadcast

Cell Broadcasting Service

Call Control Meter

Calling Line Identification Presentation

Calling Line Identification Restriction

CMOS Complementary Metal-Oxide Semiconductor

CSD

CTS

DAI

DCD

Carriage Return

Circuit Switched Data

Clear To Send

Digital Audio Interface

Data Carrier Detected

Data Communications Equipment

Data Receive

Data Set Ready

Data Terminal Adaptor

Data Terminal Equipment

Dual Tone Multi Frequency

Data Terminal Ready

Electromagnetic Compatibility

European Telecommunications Equipment Institute

Full Type Approval (ETSI)

General Radio Packet Service

Global System for Mobile communication

Hands Free

International Mobile Equipment Identity

International Mobile Subscriber Identity

International Reference Alphabet

International Telecommunications Union

Inter-Working Function

Liquid Crystal Display

Light Emitting Diode

Linefeed

Mobile Equipment

Man Machine Interface

Mobile Originated

Mobile Station

Mobile Terminated

Other Equipment Manufacturer

Phone Book

Protocol Data Unit

Packet Handler

Personal Identity Number

PLMN

PUCT

PUK

RACH

RLP

RMS

RTS

SCA

SIM

SMD

SMS

SMSC

TIA

UDUB

USSD

Public Land Mobile Network

Price per Unit Currency Table

PIN Unblocking Code

Random Access Channel

Radio Link Protocol

Root Mean Square

Ready To Send

Ring Indicator

Service Center Address

Subscriber Identity Module

Surface Mounted Device

Short Message Service

Short Message Service Center

Supplementary Service

Telecommunications Industry Association

User Determined User Busy

Unstructured Supplementary Service Data

GE865-QUAD Product Description

80309ST10054A Rev.6 – 2013-09-05

નમસ્તે! હું એક AI ચેટબોટ છું જે ખાસ કરીને Telit Wireless Solutions GE865-QUAD Product Description સાથે તમને સહાય કરવા માટે તાલીમ પામેલો છે. મેં દસ્તાવેજની સંપૂર્ણ સમીક્ષા કરી છે અને તમને જરૂરી ચોક્કસ માહિતી શોધવામાં અથવા સ્પષ્ટ અને સરળ શબ્દોમાં સામગ્રી સમજાવવામાં મદદ કરી શકું છું. પછી ભલે તમે ચોક્કસ સુવિધાઓ, મુશ્કેલીનિવારણ પગલાં અથવા સામાન્ય વપરાશ વિશે માર્ગદર્શન શોધી રહ્યા હોવ, તમારા પ્રશ્નો પૂછવા માટે નિઃસંકોચ રહો. તમે તમારી ચિંતાઓ અથવા જરૂરિયાતો વિશે જેટલી વધુ વિગતો પ્રદાન કરશો, તેટલી વધુ ચોક્કસ અને અસરકારક રીતે હું તમને સહાય કરી શકું છું!

સહાયક ટાઇપ કરી રહ્યા છે

સહાયક કીબોર્ડથી બહાર છે. કૃપા કરીને, પછીથી ફરી પ્રયાસ કરો.

જાહેરાત

GE865-QUAD Product Description

Contents

1.

1.1.

1.2.

1.3.

Introduction

Scope

Audience

Contact Information, Support

1.4.

1.5.

1.6.

Document Organization

Text Conventions

Related Documents

1.7.

Document History

2.