Sage 2015 200 Installation Guide
Anuncio
Anuncio
Sage 200 On
Premise
Deployment and
Installation Guide
2015
Copyright statement
© Sage (UK) Limited and Sage Hibernia Limited, 2014. All rights reserved.
If this documentation includes advice or information relating to any matter other than using Sage software, such advice or information is provided for information purposes only. While Sage takes responsible steps to ensure the accuracy and completeness of such information, it can only be general in nature. You should therefore take appropriate steps to ensure it is correct and relevant to your circumstances. You should also consider taking professional advice when appropriate, for example to ensure that the results obtained from using the software comply with statutory requirements.
No part of this documentation may be copied, photocopied, reproduced, translated, microfilmed, or otherwise duplicated on any medium without prior written consent of Sage (UK) Limited or Sage
Hibernia Limited, publisher of this work.
Use of the software described in this documentation is subject to Sage (UK) Limited or Sage
Hibernia Limited's Licence Agreement enclosed with, or displayed by, that software.
Sage, the Sage logo, and other Sage logos and brands are either registered trademarks or trademarks of Sage (UK) Limited and Sage Hibernia Limited, or its holding company, The Sage
Group PLC. All other marks are trademarks or registered trademarks of their respective owners.
Sage UK
North Park
Newcastle Upon Tyne
NE13 9AA
Issue date: 18/11/2014
Pbn No: 14568
Sage Hibernia Ltd trading as Sage Ireland
3096 Lake Drive
Citywest Business Park
Dublin
2 | System requirements and prerequisites
Minimum supported specifications
3 | Deploying Sage 200 across a network
Installing Sage 200 with other 64-bit web services
Installing Sage 200 on Microsoft Small Business Server 2011
Installation options for virtualised platforms
Installing Sage 200 using Citrix or Terminal Services
Supported versions of Citrix and Terminal Services
Install Sage 200 CRM on multiple servers
Security and firewall settings
Database configuration and maintenance
Create Windows user accounts and groups
Install Sage 200 on your server
Install Sage 200 on your client machines
Setting up the Self Service website
Contents
Sage 200 On Premise
Set up the Sage 200 Self Service web site internally
Install Sage 200 Self Service on an external facing web server
5 | Setting up Sage 200 to use for the first time
Setting up Sage 200 System Administration for Sage 200
Create your configuration database
Activate your Sage 200 licence
Set up user accounts, roles and features
Set up online payment processing
Set up Purchase Order Authorisation
7 | Set up Sage 200 Business Intelligence
Using BI with Microsoft SQL Server v2012
Set up Business Intelligence in Sage 200 System Administration
Configure Microsoft Excel to use the Sage Business Intelligence add -in
Set up security for Business Intelligence
Set up the BI Administration tool
8 | Set up Sage 200 Manufacturing
Set up and install Sage Graphical Planner
Additional instructions for upgrading
Upgrade from Sage 200 v5.1(all modules)
10 | Install and set up Sage 200 CRM
Check your SQL Server settings for Sage 200 CRM
Check IIS is installed as a server role
Configure IIS for Sage 200 CRM
Set up Sage 200 Accounts and Sage 200 CRM
Set up the integration in Sage 200 CRM
Troubleshooting installing Sage 200 CRM
Checklist to upgrade from 2013 R2 to 2015
Upgrading Sage 200 CRM - detailed steps
Contents
1
Introduction
This guide is designed to provide Sage 200 Business Partners and customers with all the information required to install and upgrade Sage 200 2015 for On Premise deployments.
Note:
Sage 200 can be installed as an On Premise or Online deployment. The installation instructions are different depending on your installation method. If you are installing Sage 200 Online, please see the Sage 200 Online Deployment and Installation Guide.
Required Knowledge
To install or upgrade Sage 200 you must have experience in: n
Configuring SQL Server.
n
Configuring Microsoft Internet Information Services (IIS).
Please make sure that you read the relevant sections in this guide before you install or upgrade Sage 200
2015.
For new installations
Modules
All
Required sections
System requirements and prerequisites on page 3
Notes
Supported versions of operating systems, SQL server,
Microsoft Office, browsers etc.
Deploying Sage 200 across a network on page 17
Advice on how to deploy Sage 200 in a variety of network environments
Step-by-step instructions on how to install Sage 200.
1
Sage 200 On Premise
Modules
BI
Manufacturing
CRM
Required sections Notes
Setting up Sage 200 to use for the first time on page 63
Step-by-step instructions on how to configure the
Administration tool to set up users and roles
Step-by-step instructions on how to configure Business
Intelligence
Step-by-step instructions on how to configure
Manufacturing
Step-by-step instructions on how to install CRM and configure the integration between CRM and Sage 200
Install Sage 200 CRM on multiple servers on page 34
Advice on installing CRM across multiple servers and setting up load balancing.
For existing installations
Modules Required sections
All
Notes
System requirements and prerequisites on page 3
Supported versions of operating systems, SQL server,
Microsoft Office, browsers etc.
Deploying Sage 200 across a network on page 17
Advice on how to deploy Sage 200 in a variety of network environments
CRM
Step by step instructions on how to upgrade from a variety of previous versions of Sage 200
Upgrading Sage 200 CRM on page 183
Step by step instructions on how to upgrade from Sage
200 CRM v7.2.
2
2
System requirements and prerequisites
Sage 200 is made up of various core and optional modules that integrate with the core product. When determining your system requirements, you must make sure that you have considered the requirements for all the Sage 200 modules that you want to use, as some modules have different system requirements.
The application footprint on each of the Sage 200 client machines can be large. Each of the client machines that run Sage 200, as well as the servers, must meet the minimum specification. See
Minimum supported specifications on page 10 .
3
Supported Operating Systems
Sage 200
Sage 200 Server (All modules)
Sage 200 Client (All modules)
Sage 200 CRM
2
Sage 200 CRM Server
Sage 200 CRM Client
Sage 200 Business Intelligence
3
4
1
1
1
1
4
1
4
4
Sage 200 Business Intelligence Server
1
1
1
Sage 200 Business Intelligence Client
(including Sage 200 BI Admin Tool)
4
4
Sage 200 Migration Tool
Sage 200 Migration Tool
Sage 50 to Sage 200 Data Migration Tool
32-bit
32-bit 32-bit
32-bit
Notes:
Additional configuration may be required depending on your operating system. Please see the sections relevant to the server operating system you are installing on.
We recommend that you install the latest service packs and Windows Updates for both your client and server operating system and database management system.
All modules in the Sage 200 Suite are 32-bit applications. Where supported on 64-bit platforms, the system runs in
WOW64 emulation mode.
The Sage 200 suite does not support Itanium chipsets.
1
Operating System not supported for production environments but may be used for demonstration and training purposes only.
2
Sage 200 CRM is
not
supported when it is installed more than once on the same server.
3
Sage 200 Business Intelligence is not supported on Workgroup editions of SQL server, as BI requires SQL Analysis Services.
4
Sage 200 is not supported on Windows 8 RT. The Sage 200 desktop is not optimised for touch screen devices
.
2 | System requirements and prerequisites
Microsoft SQL Server
Supported versions of SQL server
Microsoft SQL Server 2008 R2 SP2 - Workgroup, Standard & Enterprise Editions (32 & 64-bit)
Microsoft SQL Server 2012 SP2 - Standard & Enterprise Editions (32 & 64 bit ).
(SQL 2012 Business Intelligence Edition is not supported)
Microsoft SQL Server 2014 - Standard & Enterprise Editions (32 & 64-bit).
(SQL 2014 Business Intelligence Edition is not supported).
Note:
We recommend that you install Microsoft SQL Server 2012 and 2014 using the default accounts set up by the SQL Server installation wizard as shown below:
How many licensed seats for SQL server do I need?
The same number as the maximum number of concurrent Sage 200 users you're likely to have.
Prerequisites for Business Intelligence
Note:
Sage 200 Business Intelligence is not supported on Workgroup editions of SQL server.
This is because Business Intelligence requires Analysis Services.
n
Microsoft SQL Server and Analysis Services must be installed on the same machine with the same instance name.
n
SQL Server must be configured to use the following collation: Latin1_General_CI_AS n
SQL Server must be running in Mixed Mode (SQL Server and Windows Authentication).
5
Sage 200 On Premise
Other supported components
Supported Editions of Microsoft Office
Microsoft Office 2010 SP3 (32-bit only) - Standard, Professional and Professional Plus Editions
Microsoft Office 2013 SP1 (32-bit and 64-bit) – Small Business Premium, Professional Plus and
Enterprise Editions
Microsoft Office 365 (32-bit and 64-bit) – Small Business Premium, Professional Plus and
Enterprise Editions
Note:
Microsoft Office 365 Home and Personal editions are not supported.
The following table explains how Sage 200 functionality integrates with Microsoft Office:
2007 2010 SP3 2013 SP1
SP3
32bit
32bit
64bit
32bit
64bit
Office 365 Exchange
Desktop
Apps
Online Online 2007 2010 2013
Sage 200
App
Excel
Integration
Excel
Reporting
(new)
Send to Excel
(from workspaces and lists)
Opening
Attachments
Create / View
Memos
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
6
2 | System requirements and prerequisites
Send Email
(not from
Report
Designer)
Report
Designer output to email
Sage 200
Business
Intelligence
2007 2010 SP3 2013 SP1
SP3
32bit
32bit
64bit
32bit
64bit
Office 365 Exchange
Desktop
Apps
Online Online 2007 2010 2013
N/A N/A N/A N/A
Sage 200
CRM
Mail merge
Data Upload
Document
Drop
Outlook
Classic Plug in
Outlook
Exchange
Plug In
Supported Editions of Sage Payroll
Sage Payroll v21 - Standard, Professional, and Bureau Editions.
N/A
N/A
N/A
N/A N/A N/A
N/A N/A N/A
N/A N/A N/A
7
Sage 200 On Premise
Browser and Mobile device Support
Sage 200 Self Service
Sage 200 includes customisable workspaces (including Web Timesheets and Expenses (WTE) and
Purchase Order Authorisation), which can be accessed in the desktop client and via a web browser.
Workspaces have been tested on the following devices and browsers.
Safari on Apple iPad running iOS v7.1.2
Google Chrome on x86 and x64 based PCs.
Microsoft Internet Explorer v10 and v11 on x86 and x64 based PCs.
Microsoft Internet Explorer v10 and v11 on Microsoft Windows 8 and 8.1 tablets running Windows
8 Professional and Enterprise Editions.
Google Chrome on Google Nexus 10 devices running Android v.4.2.1 or greater.
Note:
Other devices and browsers may be compatible but have not been tested.
Browser settings
When accessing Sage 200 workspaces in the desktop app or from the Self Service website, you may be asked to login. If you don't wish to be prompted each time, you can set your browser to always use your login credentials:
Internet Explorer
We recommend that you set this for your local intranet zone, however you may choose to set
Trusted Sites instead depending on your domain or local security policies.
n
Local Intranet zone a. Open:
Internet Options > Security> Custom Level
b.
User Authentication > Logon
to
Automatic Logon with current user name and password
.
n
Trusted Sites a. Open
Internet Options > Security > Trusted Sites > Sites
.
b. Add the SelfService server URL e.g.
https://<server_name>
.
c. Open
Internet Options > Security > Trusted Sites > Custom Level
.
d. Set
User Authentication > Logon
to
Automatic Logon with current user name and password
.
Chrome
Enter the following from the Command prompt:
8
2 | System requirements and prerequisites n
For 32-bit operating systems:
"C:\Program Files\Google\Chrome\Application\chrome.exe" -auth-serverwhitelist="localhost,
<machine fully qualified domain name>"
. For example:
"C:\Program Files\Google\Chrome\Application\chrome.exe" -auth-serverwhitelist=localhost, sagesvr01.mydomain.com”
n
For 64-bit operating systems:
"C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" -auth-serverwhitelist="localhost,
<machine fully qualified domain name>
"
. For example:
"C:\Program Files (x86)\Google\Chrome\Application\chrome.exe" -auth-serverwhitelist=localhost, sagesvr01.mydomain.com”
Sage 200 CRM
Internet Explorer v10 (IE 10 Compatibility Mode only) and v11.
Chrome (32-bit only)
Safari on Apple iPad running iOS v7.1
Note:
Other devices and browsers may be compatible but have not been tested. Some functionality may not be compatible on tablet devices.
9
Sage 200 On Premise
Minimum supported specifications
These are the
minimum
specifications for each client and server machine in a Sage 200 On
Premise deployment. Users with large databases or high numbers of concurrent users will require higher specifications.
Due to the wide variation of companies that use Sage 200, it is not possible to give exact specifications for each system. Factors such as the concurrent number of users, size of the database and estimated growth should all be taken into consideration when sizing a server.
When tasks are processed, CPU and memory resources are used on both the client and the server.
Therefore, the specification of both machines will affect the overall performance of the system.
See
and
Sizing your database on page 24 .
Sage 200 installed on a single server
Processor
Sage 200 Server
Sage 200 Server with Microsoft SQL
Server
Dual-core 2.6GHz
or equivalent
Sage 200 Server with CRM
Disk
7,200 rpm SATA with 4GB disk space after SQL Server is installed.
Memory Network
4GB
Sage 200 Server with Sage 200 CRM
Server
Dual-core 2.6GHz
or equivalent
Sage 200 Server with BI
Sage 200 Server with Sage 200
Business
Intelligence Server
Dual-core 2.6GHz
or equivalent
Sage 200 Client
Client
7,200 rpm SATA with 4GB disk space after SQL Server is installed.
7,200 rpm SATA with 4GB disk space after SQL Server is installed.
2.8GHz Pentium 4 or equivalent (e.g.
Dual Core 1.6GHz)
7,200 rpm SATA with 500MB disk space required.
Note:
If you are going to run Graphical Planner you must have a minimum of
1GB disk space.
8GB
8GB
2GB
Gigabit
Ethernet
Gigabit
Ethernet
Gigabit
Ethernet
Gigabit
Ethernet
10
2 | System requirements and prerequisites
Sage 200 with Sage 200 CRM on a separate server
Processor Disk
Server
Sage 200 Server with
Microsoft SQL Server
Sage 200 CRM Server
Memory Network
Dual-core 2.6GHz or equivalent
7,200 rpm SATA with
1GB disk space after
SQL Server is installed.
4GB
4GB Dual-core 2.6GHz or equivalent
7,200 rpm SATA with
2GB disk space required.
Gigabit
Ethernet
Gigabit
Ethernet
Sage 200 Client
Client 2GB Gigabit
Ethernet
2.8GHz Pentium 4 or equivalent (e.g. Dual
Core 1.6GHz)
7,200 rpm SATA with
500MB disk space required.
Note:
If you are going to run
Graphical Planner you must have a minimum of 1GB disk space.
11
Sage 200 On Premise
Prerequisites
Before you install Sage 200, you must make sure the required prerequisites are installed on your system. You must also make sure that your installations of Microsoft SQL Server and Microsoft
Internet Information Services (IIS) have the required settings.
Pre-requisites
All client and server machines must have regional and language settings set to either
English (UK)
or
English (Ireland)
only.
All server machines must follow Microsoft naming conventions, i.e. server names cannot start with a numeric character or contain underscores. ( Microsoft KB 909264)
Microsoft SQL Server :
Must be running in Mixed Mode (SQL Server and Windows Authentication mode).
The
Server Collation
for SQL server must be set to
Latin1_General_CI_AS
.
Machines running Sage 200 must have a
c:\
drive although Sage 200 can be installed and run from a drive other than
c:\
.
Microsoft DotNet Framework versions installed (all server and client machines) : v3.5 Service Pack 1.
v4.0
v4.5.1
These are all included on Sage 200 2015 DVD.
Windows Identity Foundation Microsoft KB 974405 (all server server machines):
For Windows Server 2012, this can be added as a feature.
For Windows Server 2008R2, this is included on Sage 200 2015 DVD.
Microsoft Internet Information Services (IIS) v7 or greater.
IIS v7.0 and v7.5 must have the following hotfix applied KB980368
Note:
The following components are installed automatically if they are not found on your system: l
Microsoft Windows Installer v3.1
l
Microsoft Management Console v3.0
12
2 | System requirements and prerequisites
Required settings for IIS
Common HTTP Features
Application Development
Security
Management Tools
Management Tools > IIS 6
Management Compatibility
.Net Framework 4.5 Features
IIS v7.5
Default Document
Directory Browsing
HTTP Errors
IIS v8 and 8.5
Default Document
Directory Browsing
HTTP Errors
HTTP Redirection
Static Content
.Net Extensibility
HTTP Redirection
Static Content
.Net Extensibility 3.5
.Net Extensibility 4.5
ASP ASP
ASP.NET
ISAPI Extensions
ISAPI Filters
Request Filtering
Windows Authentication
ASP.NET
ASP.NET 3.5
ASP.NET 4.5
ISAPI Extensions
ISAPI Filters
Request Filtering
Windows Authentication
IIS Management Console IIS Management Console
IIS 6 WMI Compatibility IIS 6 WMI Compatibility
IIS Metabase and IIS 6 configuration compatibility
IIS 6 Metabase compatibility
WCF Services
HTTP Activation
13
Sage 200 On Premise
General considerations
Before you install Sage 200,you must also consider the following: n
If you are upgrading, you must uninstall your previous version of Sage 200.
n
If you are installing Sage 200 on Microsoft Small Business Server 2011 or a server that also hosts other web based applications, such as Microsoft Exchange or Microsoft Terminal
Services Gateway, you must run the
Sage 200 64bit Web Service config.bat (v6.4)
before installing Sage 200. This file can be found on the Sage 200 DVD or downloaded from the support area of the sage website.
n
If you are using Small Business Server 2011 as your Domain Controller, then new users including the Sage 200 Secured Services and Sage 200 Service users should be created using the SBS Create User Wizard and applying the users template.
See
Installing Sage 200 with other 64-bit web services on page 26 .
n
Sage 200 is designed to run in a domain based network environment. The only scenario where Sage is supported in a workgroup network environment is where all elements of Sage
200 are installed on a single server and accessed by clients on the local area network.
14
2 | System requirements and prerequisites n
Sage 200 automatically creates the following application pools, websites and bindings. We recommend that you do not change these settings:
Website
Sage 200 App Services
Application
Pool
Sage 200
Services
Binding
:10080
(http)
:10443
(https) n/a Sage200Services
(Virtual directory under
Sage 200 Application services)
Sage 200
Services
Sage200SecuredServices
(Virtual directory under
Sage 200 Application services)
Sage 200
Secured
Services
Sage 200 Self Service n/a
Sage 200 Self
Service
:10082
(http)
:10444
(https)
Path
C:\inetpub\Sage 200 App Services
C:\inetpub\Sage 200 App
Services\Sage200Services
C:\inetpub\Sage 200 App
Services\Sage200SeuredServices
C:\inetpub\Sage 200 Self Service
If you have an application that already uses the ports listed above you must manually install the Sage 200 pre-requisites first. Then you must install Sage 200 from a command line using the following parameters:
For example if
d:\
is your DVD drive and ports
11443
,and
11444
are you desired ports:
Msiexec.exe /i “d:\sage200.msi” SAGE200ADMINWEBSITEPORT=11443
SAGE200SELFSERVICEWEBSITEPORT=11444
Take care when assigning port numbers as many port numbers are already assigned to other
Windows services or applications.
The following table shows the names of the SSL Certificates bound to these ports:
Binding Certificate
:10443 (https) Sage 200 Application Services SSL Certificate_wixCert_1
:10444 (https) Sage 200 Self Service SSL Certificate_wixCert_1
15
Sage 200 On Premise n
The
Sage 200 Self Service
web site is only accessible from your internal network. This is because the SSL certificates used to secure these sites are based on the machine name and are not accessible externally. Additional configuration is required to make the site accessible externally.
For more information, see
Install Sage 200 Self Service on an external facing web server on page 58 .
n
Sage 200 CRM
is installed to the default website. This is not configurable. By default, the website is published using
http
and this is not a secure connection. Additional configuration is required to use CRM over a secure external connection.
16
3
Deploying Sage 200 across a network
This chapter provides information and advice when sizing your system and installing the various elements of Sage 200 across different operating systems.
n
n
Installing Sage 200 with other 64-bit web services on page 26
n
Installing Sage 200 on Microsoft Small Business Server 2011 on page 29
n
Installation options for virtualised platforms on page 31
n
Installing Sage 200 using Citrix or Terminal Services on page 32
n
Install Sage 200 CRM on multiple servers on page 34
n
Security and firewall settings on page 38
n
Database configuration and maintenance on page 41
Note:
Sage 200 2013 contained changes in the way that SQL logins are maintained.
If you want to continue to use an older version of Sage 200, you should use separate instances of
SQL for each version of Sage 200 that you deploy.
17
Sage 200 On Premise
Sizing your system
A typical deployment of Sage 200 consists of all elements residing on the same server, which also hosts the SQL server instance.
For larger sites with higher user counts and larger transaction volumes this deployment model is not always suitable and may not offer the best performance.
The following diagram shows four different sized deployments of Sage 200 and gives some suggested ‘ball park’ figures for sites that may fit into these scenarios. Due to the diverse nature of businesses that use Sage 200, it is impossible to give exact recommended specifications for each scenario but these figures are based on data gathered from sites already successfully running Sage
200.
18
3 | Deploying Sage 200 across a network
Small deployments
Recommended for sites: n
4 to 12 concurrent users n
Database sizes less than 2GB.
n
Not running Sage 200 CRM or Business Intelligence
Recommended Specifications
Dual core processor
4GB RAM
Notes
The operating system will use one core with Sage 200 and Microsoft
SQL Server sharing the other core.
No configuration around setting processor affinity is required and in practice the operating system, SQL and Sage 200 will share the cores, along with other running applications, but a dual core system should give users acceptable performance.
n
2GB for the operating system, n
1GB for SQL n
1GB for Sage 200.
No configuration around setting memory allocation is required and the operating system, SQL and Sage 200 will share the available memory, along with other running applications.
A minimum of 4GB server memory should give users acceptable performance in this scenario.
7.2K RPM SATA Disk Should be sufficient for databases less than 2GB.
Small deployments with CRM or Business Intelligence
Recommended for sites: n
8 to 12 concurrent users n
Database sizes less than 2GB.
Recommended Specifications
Dual core processor
Notes
The operating system to use one core, and Sage 200 and Microsoft SQL
19
Sage 200 On Premise
8GB
10K RPM SAS or
SCSI
Notes
Server to share the other core.
As Sage 200 CRM is a browser based module that can require high levels of server CPU when synchronising data or processing multiple user requests at the same time. The server should have a minimum of a dual core processor but as user count and data size increases towards the top end of this bracket, a quad core processor may be preferable n
2GB for the operating system, n
1GB for SQL n
1GB for Sage 200.
n
For BI: 1GB for each data warehouse / analysis services cube.
Sage 200 Business Intelligence uses Microsoft SQL Server Analysis
Services which can be a very memory intensive process. For each data warehouse and analysis services cube created, we recommend allocating at least 1GB Ram
In a RAID configuration to allow for failover.
Sage 200 CRM and Sage 200 BI will benefit from additional memory and faster access disks
Medium Deployments
Recommended for sites: n
12 to 25 concurrent users n
Database sizes less than 10GB.
Where sites have more than 20 concurrent users accessing Sage 200 CRM with similar levels of users accessing Sage 200 Accounts at the same time, it is recommended to split out Sage 200
CRM onto a second server to improve performance.
Recommended Specifications
Server
Specifications
Quad core processor
Server 1
Notes
n
Microsoft SQL Server; n
Sage 200 database n
Sage 200 CRM database.
n
Sage 200 BI
20
3 | Deploying Sage 200 across a network
Server
Specifications
Server 2
Notes
8 - 16 GB
RAM
10K RPM
SAS or
SCSI
Disk
Quad core processor
This server is effectively dedicated to handling the SQL requests of the
Sage 200 Suite.
n
For Sage 200 BI, allow at least 1GB for each data warehouse and analysis services cube.
Sage 200 Business Intelligence uses Microsoft SQL Server
Analysis Services which can be a very memory intensive process. For each data warehouse and analysis services cube created, we recommend allocating at least 1GB additional Ram but this requirement will increase with database size.
n
With terminal services, add 1 GB for each remote user session, up to a maximum of 8 remote users.
For more than 8 remote users use a separate Terminal Services server running the Sage 200 client.
See
Installing Sage 200 using Citrix or Terminal Services on page
n
In a RAID configuration to allow for failover n
The SQL data and log files ideally being hosted on different disks to the operating system.
n n
Sage 200 server
Sage 200 CRM installation (not the database), n
Additional services such as Sage 200 Self Service.
4 - 8 GB
RAM
7.2K
SATA
Disk
Large deployments
Recommended for sites: n
25 to 50 concurrent users n
Database sizes over than 20GB.
21
Sage 200 On Premise
Recommended Specifications
Server
Specifications
2 x Quad core processor
Notes
n
Microsoft SQL Server; n
Sage 200 database n
Sage 200 CRM database n
Sage 200 BI
Server 1
Server 2
Terminal
Services
16 - 32 GB
RAM
10K or
15K RPM
SAS or
SCSI
Disk
Quad core processor
This server is effectively dedicated to handling the SQL requests of the
Sage 200 Suite.
n
For Sage 200 BI, allow at least 1GB for each data warehouse and analysis services cube.
Sage 200 Business Intelligence uses Microsoft SQL Server
Analysis Services which can be a very memory intensive process. For each data warehouse and analysis services cube created, we recommend allocating at least 1GB additional Ram but this requirement will increase with database size.
n
With terminal services, add 1 GB for each remote user session, up to a maximum of 8 remote users.
For more than 8 remote users use a separate Terminal Services server running the Sage 200 client.
n
In a RAID configuration to allow for failover n
The SQL data and log files ideally being hosted on different disks to the operating system.
n n
Sage 200 Server
Sage 200 CRM installation (not the database), n
Additional services such as Sage 200 Self Service.
16 GB
RAM
7.2K
SATA
Disk
Quad
Core
Processer
With Terminal Services, use a separate server for more than 8 remote users.
22
3 | Deploying Sage 200 across a network
Server
Specifications
Server
Notes
RAM
10K RPM
SAS or
SCSI disk
Allow sufficient memory to allow for 2GB for the operating system and an additional 1GB per remote session running the Sage 200 client, up to a maximum of 12 users per server
Recommended specifications for client machines
In addition to calculating the system requirements for the servers running the Sage 200 Suite, you must also consider the client machines that will be running Sage 200. The application footprint on each of the Sage 200 client machines can be large.
Processing of tasks is carried out using CPU and memory resources on both the client and the server, and the specification of both machines will affect the overall performance of the system. The following table gives an example of this.
Profile Running Year End with 1 million Nominal Transactions
Server A / Client A 3 hrs 24
Server A / Client B 5 hrs 07
Server B / Client B 8 hrs 11
The server and client specifications were as follows;
Server A = 2 x Quad Core 2.4GHz Xeon, 8GB Ram, 15K SAS Disks, Gigabit Network
Server B = 1 x Dual Core 2.6GHz, 4GB Ram, 7.5K SATA Disk, Gigabit Network
Client A = 1 x Dual Core 2.6GHz, 4GB Ram, 7.5K SATA Disk, Gigabit Network
Client B = 1 x Single Core 2.8GHz, 2GB Ram, 7.5K SATA Disk, Gigabit Network
Client machines used to run long batch processes such as Update Waiting Postings and Month and
Year End processing should be dual core processor machines with 4GB Ram.
23
Sage 200 On Premise
Sizing your database
The Sage 200 database size will depend on a number of factors, not just the number of transactions included within the database. The following examples can be used to estimate a rough minimum expected database size given a specific number of records but be aware that with SQL database padding this size can increase 10 fold. Use these examples to calculate minimum disk requirements only.
The following record sizes are calculated using Sage 200 demonstration data for 8 financial years.
Record Type
Sales Ledger Record
Purchase Ledger Record
Nominal Ledger Record
Stock Record 4K
SOP Order (based on 4 item lines) 44K
POP Order (based on 4 item lines) 47K
Record Size (in KB)
24K
15K
14K
Sales Ledger Invoice
Purchase Ledger Invoice
Nominal Ledger Journal
3K
4K
2K
To calculate the minimum disk space required, you can take these record sizes and multiply them against the estimated number of records. For example:
Record Type Record Size (in KB) Number of Records Size
Sales Ledger Record 24K
Purchase Ledger Record 15K
10,000
10,000
240,000K
150,000K
Nominal Ledger Record 14K
Stock Record 4K
SOP Order
POP Order
44K
47K
800
16,000
12,000
2,600
11,200K
64,000K
528,000K
122,200K
Sales Ledger Invoice 3K
Purchase Ledger Invoice 4K
Nominal Ledger Journal 2K
12,000
14,000
140,000
36,000K
56,000K
280,000K
1,487,400K
24
3 | Deploying Sage 200 across a network
This gives an estimated database size of 1.4GB. The actual size of the database used in this example was 1.2GB. The difference was made up of a variety of factors, such as not all records were fully populated, not all orders had 4 item lines etc.
For further guidance, the following table gives record numbers and associated database sizes for real Sage 200 databases. As you will see, some fit the calculation but some, such as the 6GB and
10GB database examples, are considerably larger than would be expected. This is largely due to database padding and you should allow at least 2 or 3 times more disk space than the minimum calculated to allow for padding and future growth.
Real Sage 200 database sizes
No records / transactions
Sales Ledger
Records
10,000 1,000
Purchase Ledger Records 10,000 100
3,500
600
Nominal Ledger Records
Stock Records
SOP Orders
45,000 300 25,000 28,000
800
150
2,000
600
500
600
1,000
3,000 800 100
16,000 400
300
1,500 16,000 50,000 800
12,000 3,500 85,000 125,000 6,000
12,000
115,000 350,000
POP Orders 2,600 0 20,000 4,000 14,000 1,700 56,000
Sales Ledger Transactions 12,000 45,000 68,000 220,000 10,000 175,000 950,000
14,000 0 15,000 17,000 56,000 10,000 80,000 Purchase Ledger
Transactions
Nominal Ledger
Transactions
Database Size in
Gigabytes
140,000 100
1.2
3.0
420,000 610,000 116,000 295,000 5,000,000
4.0
5.5
6.0
10.0
25.0
As you will also see from the table above, the Sage 200 database can scale up to very large numbers of transactions. The 25GB example has over 5 million nominal transactions.
25
Sage 200 On Premise
Installing Sage 200 with other 64-bit web services
Sage 200 is a 32-bit application which is supported on 64-bit operating systems.
The web service elements of Sage 200 must run in a 32-bit instance of Internet Information Services
(IIS). On 64-bit operating systems IIS runs in 64-bit mode by default.
If you have any of the following applications installed on the same 64-bit server as Sage 200, you must adjust some settings to accommodate 32-bit applications: n
Microsoft Exchange 2007 with Service Pack 3.
n
Microsoft Exchange 2010.
n
Microsoft Terminal Services Gateway.
n
Windows Server Update Service (WSUS) and HTTP Compression.
To do this we have provided the
Sage 200 64bit Web Service config.bat (v6.4)
batch file which edits the
applicationHost.config
file. This file can be found on the Sage 200 DVD or downloaded from the support area of the Sage website.
To run the Sage 200 64-bit Web Service Config.bat file
The batch file is commented and should be reviewed before being run on a live system.
1. Copy the Sage 200 64bit Web Service config.bat (v6.4) file to the root c:\ drive of your Sage
200 server.
2. Right-click and choose
Run as administrator
.
3. Review the content of the batch file. If you are happy to proceed, press
Y
.
4. Choose the option that matches your configuration:
Option
A - Microsoft
Exchange 2007 with
Service Pack 3
Applied
Change made to the ApplicationHost.config file
1. Adds
Bitness64
to the
Password Expiry Module
.
The 64-bit version of the
Password Expiry Module
is incompatible with 32-bit application pools. To resolve this the
Password Expiry Module is set to only run against 64-bit applications.
2. Adds
Bitness64
to the
Password Expiry Notification Service
.
The 64-bit version of the
Password Expiry Notification Service
is incompatible with 32-bit application pools. To resolve this the
Password Expiry Notification Service
is set to only run against
64-bit applications.
26
3 | Deploying Sage 200 across a network
Option
B – Microsoft
Exchange 2010
C - Microsoft
Terminal Services
Gateway:
Change made to the ApplicationHost.config file
1. Adds
Bitness64
to the
Password Expiry Module
.
The 64-bit version of the
Password Expiry Module
is incompatible with 32-bit application pools. To resolve this the
Password Expiry Module is set to only run against 64-bit applications.
2. Adds
Bitness64
to the
Password Expiry Notification Service
.
The 64-bit version of the
Password Expiry Notification Service
is incompatible with 32-bit application pools. To resolve this the
Password Expiry Notification Service
is set to only run against
64-bit applications.
3. Adds
Bitness64
to
Kerboros Authentication
.
The 64-bit version of
Kerboros Authentication
is incompatible with 32-bit application pools. To resolve this the module is set to only run against 64-bit applications.
Adds
Bitness64
to the
Password Expiry Module
.
The 64-bit version of the
Password Expiry Module
is incompatible with
32-bit application pools. To resolve this the Password Expiry Module is set to only run against 64-bit applications.
D - Microsoft
Windows Server
Update Service
(WSUS) and HTTP
Compression:
The 64-bit version of the
Windows Server Update Service (WSUS)
uses a type of compression called
xpress
. This is a global setting that is not compatible with 32-bit application pools, which are required for Sage
200. The batch file disables
http compression
.
5. Each time you select an option, the following prompt appears:
Do you wish to configure more services? [Y/N]
.
Select
Y
to configure each application that have installed.
6. When you have finished, select option
G
.
7. The following prompt appears:
Do you want to restart IIS now?
You must re-start IIS for the changes to be applied.
To re-start IIS now, choose
Y
.
To re- start IIS later, choose
N
.
27
Sage 200 On Premise
8. Press any key to close the batch file.
A copy of your original
applicationHost.config
file is stored in the following location:
C:\Windows\System32\inetsrv\config \Backup – Pre Sage200 64bit Web Service
Config
.
If you revert back to the original version of the
applicationHost.config
file Sage 200 will stop working.
28
3 | Deploying Sage 200 across a network
Installing Sage 200 on Microsoft Small Business
Server 2011
If you intend to install Sage 200 on Microsoft Small Business Server 2011, you must consider the number of other services running on the server. Any installation of Sage 200 should be restricted to low user counts (6 – 8 users) and to small to medium size databases (~2GB). This is to make sure that performance is acceptable. To increase performance and for higher user counts and database sizes, use a separate server joined to the same domain.
Prerequisites
All editions
n
Microsoft SQL Server and Analysis Services can be set up to run under the LOCAL SYSTEM account or a specified domain account.
n
If you chose to run SQL Server and Analysis Services under a domain account rather than a local account, a new user should be created using the SBS ‘Create User Wizard’ and applying the users template.
n
If SBS 2011 is your Domain Controller, you must create new users, including the Sage 200
Secured Services and Sage 200 Services Users, using the SBS Create User Wizard and applying the users template.
n
If Analysis Services is installed as a named instance, you must open the firewall for the
Analysis Services executable. Usually
C:\program files\microsoft sql server\msas10.sql2008\OLAP\bin\msmdsrv.exe
.
Essentials editions
n
Make sure that all SQL Server and Analysis Services services, including the SQL Server
Browser, are set up to run under the LOCAL SYSTEM account or a specified domain account.
Standard and Premium editions
n
You cannot install the SQL 2008 Management Tools on the SBS 2011 server. This is because SBS 2011 already has an instance of SQL Express 2008 for Sharepoint management. You must install the SQL 2008 Management Tools on another server or a client machine attached to the SBS domain.
n
Analysis Services and SQL Server must be installed as a named instance. This is because
SBS 2011 already has an instance of SQL Express 2008 for Sharepoint management.
n
If Analysis Services is installed as a named instance, you must open the firewall for the
Analysis Services executable. Usually
C:\program files\microsoft sql server\msas10.sql2008\OLAP\bin\msmdsrv.exe
.
29
Sage 200 On Premise
To install Sage 200 on SBS 2011
You must run the
Sage 200 64bit Web Service config.bat (v6.4)
batch file which edits the
applicationHost.config
file to accommodate 32-bit applications.
1. Download the
Sage 200 64bit Web Service config.bat (v6.4)
file from the support areas of the Sage website and copy it to the root C:\ drive of the SBS server.
2. Review the contents of the file to make sure you are happy with the following changes that will be made to the
Applicationhost.config
file.
n
Adds
Bitness64
to the
Password Expiry Module
.
The 64-bit version of the
Password Expiry Module
is incompatible with 32-bit application pools. To resolve this the Password Expiry Module is set to only run against 64-bit applications.
n
The 64-bit version of the
Windows Server Update Service (WSUS)
uses a type of compression called
xpress
. This is a global setting that is not compatible with 32-bit application pools, which are required for Sage 200. The batch file disables
http compression
.
3. Right-click the file and choose
Run as administrator
.
4. Press
Y
to continue.
5. Choose
Option F - Microsoft Windows Small Business Server 2011
.
6. Once completed the following prompt appears
Do you want to configure more services?
Press
N
.
7. To exit the batch file, select option
G
. The following prompt appears
Do you want to restart
IIS now?
. To save the changes and re-start IIS, press
Y
.
You must re-start IIS for the changes to be applied.
8. Press any key to exit the batch file.
9. Install Sage 200. Select the
setup.exe
file from Sage 200 Suite DVD. Right click the file and choose
Run as Administrator
.
Note:
Due the elevated security of SBS2011, you must run the
setup.exe
file with elevated privileges.
10. Continue with a standard installation.
See
Install Sage 200 on your server on page 50
.
30
3 | Deploying Sage 200 across a network
Installation options for virtualised platforms
All elements of Sage 200 are supported in a virtualised environment if the following conditions are met: n
The underlying virtualisation platform has been accredited by the Microsoft Windows Server
Virtualisation Program. See http://www.windowsservercatalog.com/svvp.aspx
for further details.
n
The host operating system is one of the supported operating systems outlined in the system requirements. See
Supported operating systems on page 4 .
Sage 200 is also supported when running in a Microsoft Hyper-V virtualised environment which is running one of the supported operating systems outlined in the System Requirements.
You must ensure that the server hosting the virtual machines is of sufficient specification to run both the underlying operating system, and the virtual machine that Sage 200 is running on.
Client hosted virtualisation
Sage 200 clients are supported when running in a client hosted virtualised environment, provided that the virtualised environment is running a supported version of Windows. For example: n
Sage 200 Client running in a Windows 7 VM hosted on Mac OS.
n
Sage 200 Client running in a Windows 8.1 VM hosted on Linux.
Due to the large number of virtualisation platforms it is not practical or feasible for Sage to test them all. If you encounter issues while running client software in a client hosted virtualised environment, you may be required to reproduce the issues in a standard (non-virtualised) environment. Refer to the Products and Services Terms and Conditions here: http://www.sage.co.uk/legal/termsconditions/product-services-terms.html
.
Hosting
Sage 200 is only supported in a hosted environment where the entire solution is hosted and users connect to the system via a Microsoft Terminal Services, Remote Desktop Services or Citrix connection.
Sites considering a hosted solution may wish to consider Sage 200 Online as an alternative method of deployment.
31
Sage 200 On Premise
Installing Sage 200 using Citrix or Terminal
Services
Sage 200 is designed around a ‘rich-client’ architecture that is best suited to deployment over a local area network. Sage 200 is supported in a Microsoft Terminal Services, Microsoft Remote Desktop
Services and Citrix Presentation Server environment with the following considerations: n
As Sage 200 is best suited to deployment on a local area network, where possible, we recommend that you run large batch processes, such as
Update Waiting Postings
, on a high specification client joined to the local area network.
If the entire solution is hosted remotely, large batch process tasks should be run ‘out of hours’ when more bandwidth and server resources are available. Alternatively, you may want to consider deploying Sage 200 Online.
n
For Terminal servers, Remote Desktop Services or Citrix servers hosting Sage 200 client sessions, you must allow: l
At least 600MB memory per user on the Citrix/Terminal Server, for each client session running occasional or one-off tasks, such as an account enquiry or price check.
l
At least 1GB memory for each client session processing for any prolonged period of time, for tasks such as checking in stock, or creating purchase orders.
l
You should run large batch processes and updates on the local area network, or out of hours.
l
For Windows Server 2012 or 2012 R2, the application must be deployed using
'Session based desktop deployment' with a published remote desktop. 'Virtual machine based desktop deployment' is not supported.
l
If you are using form launching for Sage 200 CRM, the Task Launcher Service: o
Needs to be enabled and set to start 'Automatically'.
o
Must be set to run in multi-user mode for each user.
o with Windows Server 2012 or 2012 R2 you must enable the .NET 3.5 and
.NET
Extensibility 3.5
features in IIS.
For information on setting up the Task Launcher Service, see
Set up Form Launching on page 178 .
n
We do
not
support running Sage 200 over Citrix or Terminal Services on Microsoft Small
Business Servers.
This is because the Terminal Services Application Mode is disabled in these operating systems. See the following websites for further information: http://technet.microsoft.com/en-us/sbs/cc817589.aspx
www.microsoft.com/canada/smallbiz/products/sbs/terminalservices.mspx
32
Supported Versions of Citrix / Terminal Services/
Remote Desktop Services
Sage 200 Core Components
Sage 200 Server
Sage 200 Financials Client
Sage 200 CRM
Sage 200 CRM Server
Sage 200 CRM Client
Sage 200 Commercials
Sage 200 BI Server
Sage 200 BI Client
(including Sage 200 BI Admin Tool)
Sage 200 BI Excel Client
Sage 200 Optional Modules
Sage 200 Commercials Client
Sage 200 Project Accounting Client
Sage 200 Manufacturing
Sage 200 Manufacturing Server
Sage 200 Manufacturing Client
Sage 200 Migration Tool
Sage 200 Migration Tool
1
1
1
1
1
1
1
1
1
1
1
1
For Windows Server 2012 and 2012 R2
, the application must be deployed using ‘Session based Desktop Deployment’ with a published remote desktop. ‘Virtual machine based desktop deployment’ is not supported
.
Sage 200 On Premise
Install Sage 200 CRM on multiple servers
If you're running a Sage 200 site with a large implementation of Sage 200 CRM, you may want to consider enabling the load balancing features of the application. This allows you to balance user sessions over multiple servers.
Sage 200 CRM can be implemented in a distributed environment, where a single Sage 200 CRM database is accessible through multiple web servers. The main benefit of the multi-server CRM solution is to provide efficient session balancing for sites with high numbers of concurrent CRM users. The balancing can be performed by Sage 200 CRM or by a dedicated load balancing application.
Prerequisites
n
Decide which server you want to act as your primary Sage 200 CRM web server.
Note:
If you are hosting Sage 200 CRM externally, this will need to be the web server with your externally accessible IP address. This server will act as the initial entry point for all Sage 200 CRM connections.
n
A valid license that includes Multi-server Sage 200 CRM. The same Sage 200 CRM license key can be used on all of the Sage 200 CRM servers.
Installing multi server CRM
To install Sage 200 CRM across several servers:
1. Install the Sage 200 CRM Server on the server that acts as your primary Sage 200 CRM web server.
a. Follow the installation instructions as you would for a typical Sage 200 CRM installation.
b. Make a note of the installation name you specify in the
Installation name
field. This name is required when you are installing the other servers in the multi-server Sage 200
CRM environment.
c. Specify a separate SQL server to host the Sage 200 CRM database. If you are hosting Sage 200 CRM externally, this SQL server should be behind a firewall.
34
3 | Deploying Sage 200 across a network
2. Install the CRM server on your other web servers.
a. Follow the installation instructions as you would for a typical Sage 200 CRM installation.
b. Make sure that the name you enter in the
Installation name
field is the installation name you specified during the original Sage 200 CRM installation.
c. Change the name in the
Database Server
field to the server on which the Sage 200
CRM database was previously installed .
d. When you see the follwing message
The database already exists for the Multi-
Server install. If you wish setup can reinstall the database
, click
No
.
Continue with the installation e. Install all of the other web servers in the same way.
Configure your servers
Database configuration settings are set up automatically when you install multi-server Sage 200
CRM.
1. Log into Sage 200 CRM as an administration user.
2. Open
Administration > System > Database
.
3. Select
Change
.
Check your settings are as follows:
CRM Server
Names
Do Load
Balancing
DTLS Server
Name
The names of all the Sage 200 CRM Web Servers separated by semi colons
Set this to
True
to make sure load balancing is performed by Sage 200
CRM.
If you want to use a specialized application to perform the load balancing, set this to
False
.
Delayed Table Level Script server name.
This is the server that you want all Table Level Scripts performed on.
When all the servers are set up, the
Default database
is the same on each of the web servers.
How changes are made
Sage 200 CRM is set up on multiple servers, any changes you make on any Sage 200 CRM server are reflected on all of the other Sage 200 CRM servers in the cluster. Metadata is refreshed on all the servers if any customization is carried out.
How load balancing works
When a user logs onto Sage 200 CRM:
35
Sage 200 On Premise
1. The list of all available servers is obtained from the
custom_sysparams
table.
2. The number of users logged onto each server is calculated.
3. The CRM Logon page for the server with the lowest number of logged on users is loaded.
4. Once logged on, the name of the server can be seen in the URL.
Load Balancing Example
The following example shows happens when four users log onto Sage 200 CRM.
In this example: n
Load balancing has been configured with a cluster of three web servers, with Web Server 1 acts as the primary web server and is externally accessible.
n
The URL for Sage 200 CRM is the same for all four clients, and points to Web Server 1.
n
The Sage 200 CRM database resides on a separate SQL server, behind a firewall.
n
All web servers can access the SQL server.
1. User 1 logs on. None of the web servers currently have any logged in users. Because the load is equal amongst the servers, Web Server 1 processes the request and User 1 is logged onto the CRM Database.
36
3 | Deploying Sage 200 across a network
2. User 2 logs on. Web Server 1 already has one active connection so it balances the load by passing the request to Web Server 2. User 2 is logged onto the CRM Database with a URL pointing to Web Server 2.
3. User 3 logs. Web Servers 1 and 2 already have 1 active connection each, so Web Server 1 passes the request to Web Server 3 to balance the load. User 3 is logged onto the CRM
Database with a URL pointing to Web Server 3.
4. User 4 logs on. All web servers have 1 active connection each so the request is handled by
Web Server 1 and User 4 is logged onto the CRM Database.
Tip:
Make sure your users close their browsers once they have logged out of Sage 200 CRM.
This is to ensure accurate load balancing. When a user does not close their browser window after logging out, they will be logged back into the same server the next time they log in and this can result in unbalanced servers.
37
Sage 200 On Premise
Security and firewall settings
Sage 200 uses a combination of Windows security and SSL certificates to secure communications between the Sage 200 server and client machines.
Windows File Permissions
Domain
When deployed in an Active Directory Domain environment the central Sage file share (e.g. c:\Sage) and associated files and subdirectories have their permissions set to restrict access to specific
Sage 200 user and admin groups.
Workgroup
When deployed in a Windows workgroup environment the central Sage file share (e.g. c:\Sage) and associated files and subdirectories have their permissions set to Everyone | FullControl. We recommend that you set the Share and Security permissions as follows: n
Set the Share permissions to
FullControl/Change/Read
for these users: n
Sage 200 Administrators group n
Sage 200 Users group n
Sage 200 Services user n
Sage 200 Secured Services user n
Set the Folder Security to
Modify/Read&Execute/ListFolderContents/Read/Write
for these users: n
Sage 200 Administrators group n
Sage 200 Users group n
Sage 200 Secured Services user
Note:
Once you have installed Sage 200, restart the machine before you access System
Administration . This is so the security permissions are set correctly.
Required Firewall Settings
Sage 200 runs a variety of programs and services that can be affected by security firewall settings.
The following table details the ports that need to be opened in order for Sage 200 to function correctly.
Server
Database Server (Default SQL
Port
TCP Port 1433
Details
Default SQL Instance
38
3 | Deploying Sage 200 across a network
Server
Instance)
Database Server (Named SQL instance)
Sage 200 File Server
Port
UDP Port 1434
Details
Named SQL Instance
Sage 200 Application Server
Sage 200 Self Service
Sage 200 CRM Server
TCP Port 139
TCP Port 445
TCP Port 137
TCP Port 138
TCP Port 10443
TCP Port 10444
TCP Port 80
TCP Port 443*
File & Print Sharing
File & Print Sharing
File & Print Sharing
File & Print Sharing
HTTPS
HTTPS
HTTP
HTTPS
You will need to open port 443 and grant permission for https://licensing.services.sage.com
and www.google.com. Google needs to be allowed as when it checks the licence, it pings
Google to ensure there is an internet connection prior to going to the licensing server.
The following ports are required for Sage 200 Business Intelligence:
Server
Database Server (Default SQL
Instance)
Database Server (Named SQL
Instance)*
Port
TCP Port 2383
TCP Port 2382
Details
SQL Analysis Services
SQL Analysis Services
UDP Port 1434 SQL Browser Service
* For more information see, http://msdn.microsoft.com/en-us/library/ms174937.aspx#bkmk_ named .
Additional firewall settings if you have a named SOL instance or dynamic ports
Follow the steps below if you have named SOL instance or are using dynamic ports:
1. Find the port number: a. Open
Start > All Programs > Microsoft SQL Server
version
> Configuration
Tools > SQL Server Configuration Manager
.
39
Sage 200 On Premise b. Select
SQL Server Network Configuration > Protocols for
<your instance
Name>
.
c. Right-click
TCP/IP
and select
Properties
.
d. Select the
IP Addresses
tab and scroll down to the
IPAll
group.
e. The current port is the
TCP Dynamic Ports
number.
2. Set your Firewall to exclude this port number.
40
3 | Deploying Sage 200 across a network
Database configuration and maintenance
Once you have sized your system, you can start looking at optimising access to the database to ensure maximum performance. For smaller databases this is not so essential but as the database increases in size, especially once it starts getting over 4GB, real performance improvements can be obtained by having appropriate database configuration and maintenance plans in place.
Setting up a Database Maintenance Plan
We strongly recommended that you set up a database maintenance plan as part of your Sage 200 deployment. You should include both the Sage 200 and CRM databases in the maintenance plan.
For detailed information on setting up the tasks and plan for SQL Server please refer to the manufacturer’s web site but we recommend the following:
To set up a new database maintenance plan for Microsoft SQL Server
1. Open Microsoft SQL Server Management Studio and connect to the instance of SQL that hosts your Sage 200 and CRM databases.
2. Right click
Management > Maintenance Plans
and select
Maintenance Plan Wizard
.
3. Follow the steps in the wizard until all the tasks have been defined. We recommend that you include the following: n
Check Database Integrity
– We recommend that you run this nightly for both the
Sage 200 and CRM databases.
n
Shrink Database
– Avoid this option for large or rapidly growing databases. see the following section on
for further advice on database size.
n
Reorganize Index
– We recommend that you run this nightly for both Sage 200 and
CRM databases.
n
Rebuild Index
– We recommend that you run this weekly for both Sage 200 and
CRM databases.
n
Update Statistics
– We recommend that you run this nightly for both Sage 200 and
CRM databases.
You should only run maintenance plans ‘out of hours’ when no users are on the system. We recommend that you run the plan once initially to ensure the plan completes successfully and then schedule the tasks to run automatically overnight.
Before any maintenance tasks can be run, check that the SQL Server Agent is running.
Disk Management
If you have a large Sage 200 Suite deployment, the databases for Sage 200 and Sage 200 CRM can grow rapidly as large numbers of transactions are recorded. Rather than letting SQL Server adjust the size of your database as it grows, we recommend that you pre-empt this growth manually by
41
Sage 200 On Premise disabling the
Auto Shrink
and
Auto Grow
options within SQL Management Studio and manually padding the database to accommodate future growth.
To Disable Auto Shrink
1. Open Microsoft SQL Server Management Studio and connect to the instance of SQL that hosts your Sage 200 and CRM databases.
2. Right click
Databases > <
Sage 200 database name>
, and select
Properties
.
3. Choose the
Options
page.
4. Set
Auto Shrink
to
False
.
5. Repeat for your Sage 200 CRM database.
To manually grow your database
1. Open Microsoft SQL Server Management Studio and connect to the instance of SQL that hosts your Sage 200 ERP and CRM databases.
2. Right click
Databases > <
Sage 200 database name>
, and select
Properties
.
3. Choose the
Files
page.
4. For both the MDF and LDF files, click the browse button in the
Autogrowth
column.
5. Set the
File Growth > In Megabytes
value to an amount of disk space that will allow for plenty of growth.
For example, if your current database is 2GB, you could set this value to 6GB. Increasing this value does not increase the size of your SQL backups.
6. Repeat for your Sage 200 CRM database.
Other Disk Management Tips
n
Separating the operating system and database onto their own separate drives is best practice for large databases to make sure that Windows and system disk don't compete with SQL IO requests.
n
Make sure that the space you’re allocating to the MDF/LDF files is largely contiguous and kept defragmented.
n
The Sage 200 database must remain synchronisied with the Sage 200 CRM and Sage 200 BI warehouse and analysis services databases.
Make sure you backup or restore Sage 200 CRM and the Sage 200 BI warehouse and analysis services databases at the same time as your Sage 200 database.
Database management for Sage 200 Business Intelligence
For Sage 200 BI, if you need to recover to a specific point in time (i.e. just before the disaster happened) and wish to avoid hard disk space issues, we recommend that you:
1. Set up a disaster recovery model.
2. Reduce the size of the log file.
42
3 | Deploying Sage 200 across a network
This is because the data warehouse’s database log file grows when the data warehouse is upgraded and cubes refreshed using the Sage200 BI Admin tool. This growth is usually proportional to the number of record updates performed on the data warehouse.
If you have a relatively large Sage 200 database, the data warehouse’s log file will grow significantly every time the data warehouse is updated.This can lead to disk space problems on the database server fairly quickly for large datasets, and over a longer period of time for smaller datasets.
However the log file contains information about all the changes made to the data warehouse required for the database administrator to perform any required disaster recovery procedures.
Set up a disaster recovery mode
The disaster recovery mode that you choose for the data warehouse database depends on how you use BI.
When 'As At' cubes are updated, data is pulled down from Sage 200 to provide a typical snap shot of your data for a specific point in time. The recovery mode that you choose depends on whether you need to recover your data this specific point in time or whether the accuracy of the as 'as at' data is not crucial, i.e. the snap shot is out by one day.
You can choose one of the following modes: n
Full - choose this to recover data to a specific point in time.
This uses full, differential and transaction log backups to provide the best protection against failure. It allows the database to be restored to the point of failure or to a specific point in time.
n
Simple - choose this if the accuracy of the “as at” status of the BI reports is of low importance.
This recovers data to the most recent successful full database or differential backup. The underlying transaction logs are truncated each time a checkpoint is issued for the database.
This mode restricts the database log file growth.
To set the data recovery mode
1. Open Microsoft SQL Server Management Studio and connect to the instance of SQL that hosts the Sage 200 BI databases.
2. Right click
Databases > (data warehouse database name)
, and select
Properties
.
3. Choose the
Options
page.
4. Select the required
Recovery model
.
Reduce the database size
1. Set the data warehouse database to “restricted user” mode.
This prevents new connections being made to the database for users who do not have appropriate roles assigned.
43
Sage 200 On Premise
This will be blocked until users are already connected to the database have close their connection. This ensures that no transactions are rolled back unexpectedly (i.e. a user in the middle of updating the warehouse).
Follow the steps below or run the following SQL script:
[ALTER DATABASE database-name SET RESTRICTED_USER]
.
a. Open Microsoft SQL Server Management Studio and connect to the instance of SQL that hosts the Sage 200 BI databases.
b. Right click
Databases >
<data warehouse database name>
)
, and select
Properties
.
c. Choose the
Options
page.
d. In the
Other options > State
section, set
Restrict Access
to
RESTRICTED_
USER
.
2. Backup the transaction log and database.
a. Right -click the data warehouse database and select
Tasks > Backup
b. Make a
Full
backup if you don't already have one, otherwise skip to the next step.
c. Run the SQL command [checkpoint] against the data warehouse database. This flushes the contents of the transaction log into the main database files.
d. Make a
Transaction Log
backup. Make sure that
Truncate the transaction log
is selected on the
Options
page. This is only be available if your database is in
Full
Recovery
or
Bulk Logged
mode.
e. Make a
Full
backup of the database.
3. Shrink the database.
a. Right -click the data warehouse and select
Tasks > Shrink > Database
.
b. Verify that the database log file is now reduced in size.
4. Remove the
Restricted user
set in step 1 by either reversing the steps or by running the following SQL script:
[ALTER DATABASE DATABASE-NAME SET MULTI_
USER]
.
44
4
Installing Sage 200
Sage 200 uses a single installer to install all modules apart from Sage 200 CRM. When you run the Sage
200 installer, you can choose which modules of Sage 200 you install.
Before beginning the installation procedure, please refer to the section
Deploying Sage 200 across a network on page 17
to make sure that you know where you want to install each component.
To install Sage 200 CRM, use the Sage 200 CRM installer. This can be found in the CRM folder on your
Sage 200 DVD. For instructions on installing and setting up Sage 200 CRM, see
.
Key facts about the installer
1. You use the installer to install the various components of Sage 200 on your server and on your client machines. Use the installation wizard to select the relevant server components and client components.
The following table shows which components of the additional modules are installed when the Sage
200 components are selected.
Sage 200 components selected: Additional components installed, if selected:
Sage 200 Server Sage 200 Business Intelligence Server
Sage 200 Manufacturing Server
Sage 200 Client Sage 200 Business Intelligence Client
Sage 200 Manufacturing Client
45
Sage 200 On Premise
2. Where possible, the Sage 200 installer checks to make sure you have the correct prerequisites installed. When this is not the case, an error message is displayed. You must install the required components and run the installer again.
See
.
3. The Financials, Commercials, Project Accounting, Bill of Materials,and Self Service modules are always installed. They are activated by your licence key.
4. The Sage 200 Client must be installed on the same machine as the Sage 200 Server.
Therefore, the
Sage 200 Client
is selected by default when choosing to install
Sage 200
Server
.
5. You can choose whether to install Sage 200 Business Intelligence and Sage 200
Manufacturing, however you must install both the sever and client elements on your server.
You don't have to install BI and Manufacturing on all client machines.
6. If you are installing Sage 200 Manufacturing on a PC which has Sage 50 Manufacturing installed, uninstall Sage 50 Manufacturing before installing Sage 200 Manufacturing.
7. To install Sage 200 Self Service on separate external facing web server, use the Self Service standalone installer. This can be found on the Sage 200 DVD.
See
Install Sage 200 Self Service on an external facing web server on page 58
.
Steps to install Sage 200 On Premise
1.
Create Windows user accounts and groups on page 47 .
2.
Install Sage 200 on your server on page 50
.
3.
Install Sage 200 on your client machines on page 53
46
4 | Installing Sage 200
Create Windows user accounts and groups
Users access the Sage 200 desktop and Sage 200 System Administration using their Windows
User account log on details.Windows User accounts are also used to access Sage 200 services.
Before installing Sage 200, you must create the required Windows user groups and accounts. You must create the following: n
A Sage 200 Administrators Group.
n
A Sage 200 Users Group.
n
A Sage 200 Services user.
n
A Sage 200 Secured Services user (which must be a different user to the Sage 200 Services user).
Set up the required groups and users
Set up your groups and users in Active Directory using the following information. If you are using
Workgroups, set them up as local groups and users using the details below.
1. Create a Sage 200 Administrators Group a. Create a group in Active Directory using the following information:
Active Directory Group Name Active Directory Group Description
Sage200Admins Sage 200 Admins b. Add the required Windows users to this group. Users belonging to this group can access Sage 200 System Administration, Sage 200 desktop and Sage 200 Self
Service.
Note:
You cannot use the Domain Administrators group as the Sage 200 Administrator group, as this sets up the file share permissions incorrectly.
2. Create a Sage 200 Users Group: a. Create a group in Active Directory using the following information:
Active Directory Group Name Active Directory Group Description
Sage200Users Sage 200 users b. Add the required Windows users to this group. Users belonging to this group can access Sage 200 desktop and Sage 200 Self Service.
47
Sage 200 On Premise
3. Create a Sage 200 Services user: a. Create a user in Active Directory using the following information:
Active Directory User Name Active Directory User Description
S200Services Sage 200 Service Account b. Enter a password for the user account and set it to
Password never expires
. It does not require any other special permissions.
c. Add this user to the Sage 200 Administrators group.
When you install the Sage 200 Server, you must specify the name and password for this account.
If you are integrating with Sage 200 CRM, this Windows user account must also be specified on the integration. See
Create a new Sage 200 CRM integration on page 166
.
4. Create a Sage 200 Secured Services user: a. Create a user in Active Directory using the following information:
Active Directory User Name Active Directory User Description
S200SecuredServices Sage 200 Secured Service Account b. Enter a password for the user account and set it to
Password never expires
. It does not require any other special permissions.
c. This account should be a member of your domain users group but should not be added to the Sage 200 Users or Sage 200 Administrators group.
When you install the Sage 200 Server, you must specify the name and password for this account.
Notes
1. Changing passwords
If the password is changed for either of the Sage 200 Service accounts, you must update the passwords in these application pools:
Application Pool User
Sage 200 Secured Services S200SecuredServices
Sage 200 Self Service
Sage 200 Services
S200Services
S200Services
If you do not do this, you will see the following error message when accessing Sage 200.
48
4 | Installing Sage 200
2. You can add the required windows user accounts to the user groups after Sage 200 has been installed. Access to specific Sage 200 modules and features is controlled in Sage 200
System Administration.
3. For more information on where to set up users using Windows Active Directory, or using
Windows user groups, refer to your operating system help, as the process may involve different steps in different operating systems.
49
Sage 200 On Premise
Install Sage 200 on your server
1. Insert the Sage 200 DVD. The Installation wizard appears.
If you do not have
Autorun
enabled, select the
Setup.exe
file from the DVD.
a. If you have enabled Microsoft
User Account Control
, right-click
setup.exe
and choose
Run as Administrator
.
b. If you are installing on a Microsoft Terminal/Remote Desktop Services Session Host: i. Switch to ‘install’ mode before continuing. To do this:
At the command prompt type:
change user /install
.
ii. Once the installation is complete, switch back to ‘execute’ mode. To do this:
At the command prompt type:
change user /execute
.
See MS Documentation for more information: http://technet.microsoft.com/enus/library/cc742815.aspx
2. Accept the license agreement.
3. Choose
Install Sage 200 Server
. This installs: a. The file server components such as reports, layouts, workspaces and other files and directories required by Sage 200.
b. Application files and web services. These are essential for the integration between modules.
Note:
If you want to install the Self Service application on a external facing website see
Install Sage 200 Self Service on an external facing web server on page 58
.
4. Choose the client components to install on your server:
Install Sage 200 Client
This is already selected as you must install the Sage 200
Client on your server machine.
This installs the application files and directories necessary to run the Sage 200 client application, and the Sage 200 System
Administration tool.
Install Sage 200 Form
Launcher
If you are also installing Sage 200 CRM, select this to install the integration component required to launch Sage 200 forms from within Sage 200 CRM.
Further configuration of the
Sage 200 Form Launcher
is required if you: n
Have an application already using the HTTP port
8088
.
See
Change the port number for the Form Launcher on page 178 .
50
4 | Installing Sage 200 n
Are running Sage 200 in a Terminal Server or Citrix environment.
See
Using the Form Launcher with Terminal Services,
Remote Desktop Services and Citrix on page 179
.
5. Select any additional modules that you want to install.
Choose from the following options:
Install Sage 200
Business Intelligence
Install Sage 200
Manufacturing
Select
Copy Graphical Planner installer to server
if you have purchased Graphical Planner along with Sage 200
Manufacturing.
This copies the required Graphical Planner files to a directory
(by default
c:\sage\installers\graphicalplanner
). You can then install Graphical Planner from the Preactor11.2.0.21706.exe
file. For more information, see
Install Graphical Planner on page 119 .
6. Enter a location on your server for the
Logon Folder
.
Make sure there are no spaces in the location as this will cause the installation to fail.
7. Select the Windows User Groups that will be used for your Sage 200 Administrators and
Sage 200 Users.
Administrators
Group
Users Group
Select the group that you have set up for the Sage 200 Administrators.
For example,
Sage200Admins
Sage200Users
.
.
Select the group that you have set for Sage 200 Users. For example,
8. Enter the login details for the user account that you've set up for the Sage 200 Services.
Server Login Details
Name of the Sage 200 Services user account that you have created to access the Sage 200 Services. For example
S200Services
.
9. Enter the
Server Identity Password
. This is the password for the Windows account entered in step 8.
10. Enter the login details for the user you've set up for the Sage 200 Secured Services.
Server Login Details
Name of the Sage 200 Secured Services user account that you have created to access the Sage 200 Secured Services. For example
S200SecuredServices
.
51
Sage 200 On Premise
11. Enter the password for the
Secured Services
account.
12. Enter a location for the folder where the Sage 200 client will be installed.
By default this is
C:\Program Files\Sage\Sage 200
.
13. To install Sage 200, click
Install
.
14. Click
Finish
when the installation is complete.
52
4 | Installing Sage 200
Install Sage 200 on your client machines
Once you have installed and configured Sage 200 on your server machine, you can move across to each of the clients and install the necessary client-side modules.
You can install the Sage 200 Client across your network by using the network share, created automatically when you installed the Sage 200 Server.
Note:
You need to be an Administrator on the client machine to install Sage 200. To use Sage
200, you need to be a domain user in one of the Sage 200 user groups.
1. From the client machine, choose
Start > Run
.
2. Enter the UNC path to your Sage 200 File Server. For example
\\<
Machine_Name
>\Sage
.
3. Select the
Installers
folder. Run the
setup.exe
file from within this folder.
If you have enabled Microsoft
User Account Control
, right-click
setup.exe
and choose
Run as Administrator
4. Click
Next
to continue with the installation.
5. Accept the license agreement.
6. Do
not
select any of the
Server Components
.
7. On the
Client Components
screen, select
Install Sage 200 client
. If required, choose to install the Sage 200 CRM form launcher.
Install Sage 200 Client
This installs the application files and directories necessary to run the Sage 200 client application, and the Sage 200 System
Administration tool.
Install Sage 200 Form
Launcher
This installs the integration component required to launch Sage
200 forms from within Sage 200 CRM.
Further configuration of the
Sage 200 Form Launcher
is required if you: n
Have an application already using the HTTP port
8088
.
See
Change the port number for the Form Launcher on page 178 .
n
Are running Sage 200 in a Terminal Server or Citrix environment.
See
Using the Form Launcher with Terminal Services,
Remote Desktop Services and Citrix on page 179
.
8. If you chose to install Business Intelligence or Manufacturing when you installed on your server machine, these modules will be selected automatically.
53
Sage 200 On Premise
9. Make sure that the
Logon Folder
location contains the UNC path to your Sage 200 Server machine.
10. Enter a location for the folder where the Sage 200 client will be installed.:
By default this is
C:\Program Files\Sage\Sage 200
.
11. Click
Install
to install the Sage 200 Client.
Click
Finish
to complete the installation.
54
4 | Installing Sage 200
Setting up the Self Service website
Sage 200 includes customisable workspaces (including Web Timesheets and Expenses (WTE) and
Purchase Order Authorisation), which can be accessed in the desktop client and via a web browser.
Once you have installed and configured Sage 200, the website can be accessed internally from any machine with a compatible internet browser. See
Browser and Mobile device Support on page 8 .
If you want to access the Self Service website externally over the internet, additional configuration is required. This is because the SSL certificates that are installed with Sage 200 are for internal use only and are based on the machine name. They are not externally addressable. To use Sage 200
Self Service externally over the internet, see
Install Sage 200 Self Service on an external facing web server on page 58 .
Key facts about the Self Service website
1. You must install the SSL certificate for the website on each client machine.
2. To access the website, a user must be set up as
Web user
in their user properties.
3. You can have up to 100 concurrent web users.
4. You can view Sage 200 data via workspaces and lists.
5. There is a 20MB limit on the size of an attachment that you can view via a workspace viewed in a web browser. This affects the following workspaces: Bank Account Enquiry, Customer
Account Enquiry, Nominal Account Enquiry, Stock Status Enquiry and Supplier Account
Enquiry. There is no limit for viewing attachments via a workspace in the Sage 200 desktop application.
6. You can authorise purchase orders if you have activated Sage 200 Commercials.
7. You can enter timesheets and expenses if you have activated Sage 200 Project Accounting.
Steps to set up Self Service
n
Set up the Sage 200 Self Service web site internally on page 56
a. Install the SSL certificates on each client machine. This can be done per client machine or via a group policy.
b. Allow each user to access the Self service website n
Install Sage 200 Self Service on an external facing web server on page 58
a. Check the prerequistes b. Install the Self Service website c. Secure the website with your own SSL certificate d. Set up firewall rules
55
Sage 200 On Premise
Set up the Sage 200 Self Service web site internally
Install the internal SSL Certificate
You must install the SSL certificate on each client machine that will access Sage 200 Self Service.
You can do this on each individual machine or via a group policy
Install on an individual client machine
Complete the following steps . You must be logged on to the machine as an administrator.
1. Choose
Start > Run
. Enter the UNC path to the
Sage
folder on your Sage 200 Server. For example
\\<Machine_Name>\Sage
.
2. Select
Logon > SSLCertificate
.
3. Right-click the
S200SSServerRootCA.cer
file .Choose
Install Certificate
.
The
Certificate Import Wizard
appears. Click
Next
.
4. Select
Place all certificates in the following store
.
5. Click
Browse
. The
Select Certificate Store
window appears.
6. Select
Show physical stores
.
7. Select
Trusted Root Certification Authorities> Local Computer
. Click
OK
.
8. Click
Next
and
Finish
.
You can now browse to the Sage 200 Self Service web site over a secure connection.
Add certificates via a Group Policy
If you have several client machines that will use Sage 200 Self Service, you can deploy the Sage
200 SSL certificates via Microsoft Active Directory Group Policy. This means you do not have to install the certificate individually on each client machine.
1. Copy the contents of the following folder from your Sage 200 file server to a new folder on your domain controller.
C:\Sage\Logon\SSL Certificate
.
2. On the domain controller, choose
Start > Administrative Tools > Group Policy
Management
.
3. Select
Group Policy Management > Forest > Domains
for the domain containing the
Default Domain Policy GPO that you want to edit.
4. Select
Group Policy Objects
.
5. Right-click
Default Domain Policy GPO
, and click
Edit
.
6. In the Group Policy Management Console, select
Computer Configuration > Windows
Settings > Security Settings
. Click
Public Key Policies
.
56
4 | Installing Sage 200
7. Right-click
Trusted Root Certification Authorities
.
8. To import the certificates, click
Import
.Click
Next
.
9. Browse to the location of the certificates you copied in step 1. Click Next.
10. Make sure the
Certificate Store
path is set to
Trusted Root Certificates Authorities
. Click
Next
.
11. Click
Finish
and
OK
to complete the import.
For further information on deploying certificates, see http://technet.microsoft.com/enus/library/cc754841.aspx
.
Set up users to access the Self Service website
A user can only access the Self Service website if they are designated as a
Web user
in their user properties in System Administration. You can have up to 100 concurrent web users.
1. For each user, open
Users > Properties
.
2. Select
Is Web User
.
Access the website
Once set up, each user can access the website by entering the Self Service address in a web browser. This should include the server name and port number of the website. By default, the port number is
10444
.
For example:
https://
<Server_Name>
:10444/Sage200SelfService
.
Note:
There is a 20MB limit on the size of an attachment that you can view via a workspace viewed in a web browser. This affects the following workspaces: Bank Account Enquiry,
Customer Account Enquiry, Nominal Account Enquiry, Stock Status Enquiry and Supplier
Account Enquiry. There is no limit for viewing attachments via a workspace in the Sage 200 desktop application.
57
Sage 200 On Premise
Install Sage 200 Self Service on an external facing web server
Sage 200 2015 can be set up so that the Self Service application can be accessed externally from mobile devices and machines that are not joined to your domain.
In order to do this you will need: n
An external facing web server with internet access to host the Self Service web site.
n
Note:
Externally facing Self Service is only supported when installed on Windows
Server 2008 R2, 2012 or 2012 R2.
n
A commercially available SSL Certificate to verify your domain and secure the web site.
n
A registered domain name to direct traffic to the web site.
We recommend that you purchase any required domain names and SSL certificates and configure them to point to your external facing web server. Speak to your service provider for advice on how to do this.
Before you install the Self Service application on an external facing server, you must have installed and fully configured Sage 200 on your Sage 200 Server and you must be able to log into Sage 200.
Once configured, your Sage 200 deployment will look like this:
Prerequisites
The machine hosting the external facing Self Service web site must be joined to the same domain as the Sage 200 Server and have the following installed:
Microsoft Internet Information Services (IIS) v7.5 or greater
The following versions of Microsoft DotNet Framework v3.5 Service Pack 1 (Feature for Server 2008 R2 & 2012) v4 (Feature for Server 2012) v4.5.1 (Feature for Server 2012)
These are included on the Sage 200 2015 DVD
58
4 | Installing Sage 200
Windows Identity Foundation (Microsoft KB 974405) (Feature for Server 2012)
This is included on the Sage 200 2015 DVD
Microsoft KB980368
This is included on the Sage 200 2015 DVD
IIS must have the following settings:
Common HTTP Features
Application Development
Security
Management Tools
Management Tools > IIS 6
Management Compatibility
IIS v7.5
Default Document
Directory Browsing
HTTP Errors
HTTP Redirection
Static Content
.Net Extensibility
IIS v8 and 8.5
Default Document
Directory Browsing
HTTP Errors
HTTP Redirection
Static Content
.Net Extensibility 3.5
.Net Extensibility 4.5
ASP
ASP.NET
ISAPI Extensions
ISAPI Filters
Request Filtering
Windows Authentication
ASP
ASP.NET
ASP.NET 3.5
ASP.NET 4.5
ISAPI Extensions
ISAPI Filters
Request Filtering
Windows Authentication
IIS Management Console IIS Management Console
IIS 6 WMI Compatibility IIS 6 WMI Compatibility
.Net Framework 4.5 Features
IIS Metabase and IIS 6 configuration compatibility
IIS 6 Metabase compatibility
WCF Services
HTTP Activation
To install and set up Self Service, you must:
59
Sage 200 On Premise n
Install the Self Service web site on the external facing server.
n
Secure the web site with your SSL certificate n
Set up firewall rules.
n
Check you can access the Self Service web site.
To install the Self Service web site
Follow these instructions to install the Self Service web site on your external server.
1. Open the shared Sage folder on your Sage 200 Server machine.
2. Select
Installers > Sage 200 Self Service
.
3. Run the
Sage200SelfService.exe
file. This opens the installation wizard.
4. Accept the Licence Agreement and click
Next
.
5. The path to the
Logon
directory on your Sage 200 Server machine is displayed. Make sure that the path is correct and click
Next
.
6. Check the name of the windows account that you set up to run the Sage 200 Services. Enter the password for this account. Click
Next
.
7. Click
Install
to start the installation.
To secure the Self Service web site with your SSL certificate
Once you have installed the Self Service web site on your external server machine, you need to amend the web site bindings in IIS to use the external SSL certificate and set up firewall rules on both your Sage servers.
1. Open Internet Information Services (IIS) Manager.
2. Expand the list of websites and choose
Sage 200 Self Service
.
3. Right-click and choose
Edit Bindings
.
4. Choose
Add
and change the type to
https
.
5. From the
SSL certificate
drop-down menu, choose your external SSL certificate.
Note:
This is
not
the Sage 200 Self Service SSL Certificate.
6. Click
OK
.
Note:
You may see a message informing you that another site is using the same
HTTPS binding. Click
Yes
to apply the binding to this site.
7. Click
OK
to close the
‘Add Bindings
’ window.
8. Click
Close
to close the
Site Bindings
window.
The Sage 200 Self Service web site is now using your external SSL certificate.
60
4 | Installing Sage 200
To set up your firewall rules
To increase the security of your deployment you must configure the Windows firewall on both of your Sage servers.
The following table details the ports that need to be opened in order for Sage 200 to function correctly.
Sage 200 Server (Inbound Rules)
SQL Server (Inbound Rules)
Sage 200 Self Service Server
(Inbound Rules)
TCP Port Sage 200 App Services(Default 10443)
TCP Port Sage 200 Self Service | Internal (Default
10444)
TCP Port SQL Server (Default: 1433)
TCP Port 443
To access the Self Service web site
1. To access the Sage 200 Self Service site, open a browser and enter the following address:
https://<your domain name>/Sage200SelfService
2. Log onto the site using Windows credentials associated with a web enabled Sage 200 User.
Note:
You may not be able to access this address directly on the external facing web server but it will be accessible on all other supported machines / devices.
61
62
5
Setting up Sage 200 to use for the first time
Before you can access and start using Sage 200, you must set up your company database and users in the Sage 200 System Administration and carry out initial set up task in the Sage 200 desktop application
This section explains how to set up Sage 200 System Administration and the Sage 200 desktop for the following modules: n
Financials n
Commercials n
Project Accounting n
Bill of Materials
If you are using other modules, there may be additional configuration tasks. Please see the relevant sections for each product: n
Set up Sage 200 Business Intelligence on page 85
n
Set up Sage 200 Manufacturing on page 113
n
Install and set up Sage 200 CRM on page 153
63
Sage 200 On Premise
Setting up Sage 200 System Administration for
Sage 200
Before you can access Sage 200, you must use the Sage 200 System Administration application to:
1. Create a configuration database.
This holds all the data for the System Administration tool in a SQL server database.
2. Create user accounts
3. Enter your Sage 200 licence details.
4. Create your company databases.
Each Sage 200 company has a database stored on your SQL server.
5. Set up user accounts.
Within Sage 200 System Administration, you specify which companies your users can access and which roles the users belong to.
6. Create roles and authorise features.
n
Roles
- you use roles to specify which parts of Sage 200 you want your users to access.
Note:
Each user must have the
Sage 200 System Administration Services
feature authorised for their role. This allows a user to access the Sage 200 desktop.
n
Features
- these are the individual screens in Sage 200. You create a role and then authorising the relevant features (screens) for that role.
Note:
You can only access System Administration if you have been added to the Sage 200
Administrators group in Windows.
For detailed information on the options available in the System Administration tool, please see the System Administration help: https://support.sage.co.uk/help/sage200/help.htm
.
64
5 | Setting up Sage 200 to use for the first time
Create your configuration database
1. Open Sage 200 System Administration. The following message appears:
2. Click
OK
to create a new configuration database.
3. Enter or browse for the correct SQL server.
4. Enter a name for the configuration database. For example,
Sage200Configuration
.
5. Click
Create
to create the configuration database.
If another Sage 200 Administration user is also attempting to create the configuration database at the same time, you will see the message:
Check with any other Administration users of Sage 200 and try again.
6. If required, enter the
User Name
and
Password
for an SQL user with access rights to create a database, or choose
Use Integrated Windows Authentication
.
65
Sage 200 On Premise
7. Click
Test
or
Update
to test or update the company details.
8. Click
OK
.
66
5 | Setting up Sage 200 to use for the first time
Create users
When you have created the configuration database, the
Manage User Lists
window appears. This displays all the Windows User accounts that are members of the
Sage 200 Users
and
Sage 200
Administrators
groups that were specified during the installation.
Users access Sage 200 and Sage 200 System Administration using their Windows User account.
The first time you install Sage 200, all the Windows User accounts will have a status of
New
.
For an existing installation of Sage 200, you can match the Windows User accounts to existing
Sage 200 user accounts. See Upgrading to Sage 200 v2011 on page 1 for more information.
To create your Sage 200 user accounts
1. Check the list of Users on the
Manage User Lists
screen.
2. To create a new Sage 200 user account for all the Windows User accounts with a status of
New
, click
OK
.
New Sage 200 user accounts are created.
You can also use this screen, at any time, to update your Sage 200 user list. For example, if you add or delete windows users in future, this screen is displayed when you open Sage 200 System
Administration. Use this screen to link users again and ensure that only those users who should do so, can access Sage 200.
Note:
When you delete a Windows user account, the user will still be able to use Sage 200 until you refresh the user list, by using the
Manage User Lists
screen.
67
Sage 200 On Premise
Activate your Sage 200 licence
You must register Sage 200 and obtain a licence before you can use it. Once registered, you activate your licence using the Sage Licensing service. You can access this via the internet. If you're not currently connected to the internet, you can obtain a 30 day licence via email.
You activate your licence using your account number and serial number.
To register via the Internet
1. Enter your customer
Account Number
.
2. Enter your product
Serial Number
.
3. Click
OK
.
The system automatically contacts Sage for a valid licence. This licence enables you to use
Sage 200.
Once the licence has been activated, the core components are automatically installed.
If you see the following message, you may need to register offline.
You can now access Sage 200 System Administration
Note:
If you are upgrading to Sage 200 Online, you must first add the
AttachmentMigration.sdbx.
To register offline
This generates a licence request file which you send to Sage Support via email. Sage Support will email you a licence entitlement file which you import into System Administration to register Sage
200.
68
5 | Setting up Sage 200 to use for the first time
Your offline licence is valid for 30 days. This is to give you a window in which to access to the license server online. If you can't access the license server via the internet within this 30 days, you will need to generate a new offline activation. In this case , you 'll see the following message:
The
Sage Licence will expire in 7 days because the entitlement server has been unavailable for 28 days
.
1. When the Licence window appears, click
Cancel
. The Core Components are installed.
2. Right-click
Licence
and select
Generate Licence Request
.
3. Enter your
Account Number
and
Serial Number
and click
Generate Request
.
This creates a licence file in XML format which you send to Sage Support.
4. Browse to where you want to save the XML file.
5. Enter a
File name
and click
Save
.
6. Email this XML file to Sage Support.
You will receive an email from Sage Support with your refreshed licence attached. This has the extension .ent (Entitlement files). Save this file to your PC.
1. Open
System Administration > Licence
.
2. Right-click and select
Import Licence File
.
3. Click
Import Licence File
and browse to where you saved the ENT file.
4. Select the file and click
Open
.
Your license is activated.
Note:
When you implement offline licensing the Sage 200 application will still intermittently attempt to access the Sage licensing server. This process will eventually timeout and the application will continue to work provided that the licence you have on your Sage 200 server is valid.
If you are experiencing intermittent delays starting the Sage 200 application then reducing the timeout period could help. To reduce the timeout period:
IMPORTANT: We recommend that you take a backup copy of any config file before making any changes.
1. Ensure all Sage 200 users are logged out. Then:
Open:
c:\inetpub\Sage 200 App
Services\Sage200SecuredServices\web.config.
2. Edit the SlsServiceTimeOut key:
Old value: <add key="SlsServiceTimeOut" value="30000"/>
New value: <add key="SlsServiceTimeOut" value="1000"/>
3. Save the file.
4. Reset IIS.
69
Sage 200 On Premise
Create your company database
You can use Sage 200 System Administration to create new SQL databases for your Sage 200 companies.
If you have an existing Sage 200 company database, you add the company in the System
Administration tool. The database must be attached to your SQL server.
For more information, see Upgrading to Sage 200 v2011 on page 1 .
Tip:
We recommend that you practise setting up your Sage 200 system and processing data. To do this you can use the Demonstration company data provided with Sage 200.
Before you can use the demonstration data, you must add the demonstration data as a company in Sage 200 System Administration. A SQL backup for the demonstration data is available on the Sage 200 DVD in the
Demo Environment Data
folder.
To create a new company database
Open:
System Administration.
1. From the Navigation bar, choose
Companies
.
2. Right-click and choose
Add New Company
.
3. Enter your
Company Settings
:
Company Name
Enter the name of the company.
This must be at least one character in length and unique.
Note:
Do not use the word
Configuration
in the company name.
Parent Company
Attachments
If this is a consolidated company, select the name of the parent company.
For more information about consolidated companies see the Sage
200 help.
Enter the path to the Attachments folder for this company. This must be a UNC path.
This is the directory used to store company specific files.
You must use separate attachments directories for different companies.
70
5 | Setting up Sage 200 to use for the first time
4. Enter your
Server Settings
:
Server
Database Name
Enter the name of your SQL server.
You must have the appropriate permissions to access the server.
Enter the name of the database on the server.
5. Choose from one of the following: l
Test
Click this to test the connection to the database.
l
Update
Click this to update an existing Sage 200 database.
l
Create
Click this to create a new Sage 200 database on your SQL server.
If another Sage 200 Admininstration user is also attempting to create or update a database at the same time, you will see the message:
Check with any other Administration users of Sage 200 and try again.
71
Sage 200 On Premise
Set up user accounts, roles and features
Before your users can access Sage 200, you must choose which companies each Sage 200 user can access and assign at least one role to each Sage 200 user account.
The role controls which menu options and workspaces a user can access in Sage 200. Each menu option in Sage 200 is listed as a
Feature
in System Administration. To make a menu option available to your users in Sage 200, you must authorise the relevant features for each role.
To set up your user accounts, you must:
1. Create roles.
2. Authorise features for each role.
3. Assign user accounts to each role.
4. Assign companies to each user and set the user properties.
To create user roles
1. From the Navigation bar, choose
Roles
.
2. Right-click and choose
Add New Role
.
3. Enter a
Role Name
.
4. Click
OK
. The
Role properties
window appears.
5. Select the
General
tab. Select from the following options:
Receive alerts
From
Messenger
Select this to allow members of this role to use
Sage Messenger
. Users will receive message alerts advising them of system issues and any action that needs to be taken.
Remote
Users Access
Only - CRM
This is applicable for Sage 200 CRM users only.
Select this to allow members of this role to remotely access Sage 200 forms.
The Sage 200 CRM integration must be a member of this role.
Users who are assigned to a
Remote Users Access Only
role cannot enter or amend information in Sage 200 directly.
6. Select the
Users
tab. Select the users to assign to the role and add them to the
Selected
Users
list.
7. Click
OK
.
To authorise features for a role
1. From the Navigation bar, choose
Roles
.
2. Select the relevant role.
72
5 | Setting up Sage 200 to use for the first time
3. Right-click and select
Features
.
l
To allow the role full access to Sage 200, select the
Features
checkbox.
l
To only allow access to certain Sage 200 features, clear the
Features
checkbox and select the required features from the list.
The features are arranged in folders to match the Sage 200 modules. Select the checkbox next to the module folder to allow access to all options within that module.
Expand the folders to authorise individual features.
Note:
You must authorise the
System Administration Services
feature for all roles that need to log on to the Sage 200 desktop.
4. Click
OK
.
To assign companies to a user and enter user details
1. From the Navigation bar, choose
Users
.
2. Select a
User Name
.
3. Click
OK
. The
User properties
window appears.
4. Enter the
User Properties
on the relevant tabs.
5. Select the
General
tab. Select from the following options:
User Enabled
Can Edit Menu
Select this to make the user account active.
A user account must be active to allow a user to log on to Sage 200.
Select this to allow the user to edit their menu in the Sage 200 desktop.
Can Edit
Workspaces
For more information about creating and editing menus, see the Sage 200 Help .
Select this to allow the user to edit workspaces using the Workspace
Designer.
For more information about the
Menu Design Mode
, see the
Sage 200 Help .
Receive
Notifications by
Select this if you want the user to receive email messages when purchase orders require authorisation in Sage 200.
For more information, see the System Administration help.
For more information about the
email messages
, see the
Sage 200 Help .
73
Sage 200 On Premise
In Product Survey
Enabled
.
Select this to allow this user to receive the Sage 200 In Product
Survey.
This is selected by default.
Note:
The
In Product Survey
must be
Enabled
. For more information see the System Administration help.
Is Web User
Select this to allow the user to access the Sage 200 Self Service website.
6. Select the
User details
tab. If required, enter information about your user.
7. Select the
Member of
tab. Use this to assign a role to your user.
You must assign at least one role to the user.
8. Select the
Company Access
tab. Use this to assign the relevant companies to the user.
Use the arrow keys to move the company to the
Selected Companies
list.
If you want this user to access all companies, select
Access all Companies
.
9. Click
OK
to save the user properties.
For more information about user accounts, role, and features, see the System
Administration help: https://support.sage.co.uk/help/sage200/help.htm
.
74
5 | Setting up Sage 200 to use for the first time
Set up online payment processing
Online payments are payments that customers make by card, using an online payment provider such as Sage Pay.
To operate online payment processing within Sage 200, you need to set up Sage 200 as follows.
To set up online payment processing
Within the payment service provider:
1. Set up an account with the payment service provider.
Sage Pay
is the payment service provider used by Sage 200.
2. Log on to the account and access the settings for the account.
Enter the IP address of the customer in the payment service provider settings.
Within Sage 200 System Administration:
1. Add
Vendor accounts
.
The
Vendor Account
identifier accompanies every payment transaction made with the online payment service provider.
2. Configure the vendor account: a. From the Navigation bar, choose
Vendor Accounts
.
b. Right-click and choose
Add New Vendor Configuration
.
c. Select
Sage Pay
from the
Payment Type
drop-down list. The
Vendor Configuration
window appears.
d. Enter the details required on the various tabs.
For more information about configuring vendor accounts see the System Administration help: https://support.sage.co.uk/help/sage200/help.htm
.
75
Sage 200 On Premise
Set up Purchase Order Authorisation
You can send email messages to Sage 200 users when purchase orders require authorisation in
Sage 200. Once set up, emails are sent to the Sage 200 user specified as the
authoriser
and to the
Sage 200 user specified as the
originator
of the order. For more information about when these emails are generated, please see the Sage 200 Help.
You can also allow Sage 200 users who are specified as
authorisers
of purchase orders, to authorise their purchase orders via the Sage 200 Self Service website.
For more information about setting up purchase order authorisation see the Sage 200 help: https://support.sage.co.uk/help/sage200/help.htm
To send email notifications
1. Configure your
E-Mail settings
.
a. From the Navigation Bar choose
Messaging > E-Mail Settings
. The email settings are displayed.
b. To enter or change your email settings, click
Edit
.
c. Enter your email
Server Information
details.
You can use either a Microsoft Exchange Server or an SMTP mail server to deliver the purchase order notification email messages.
E-Mail Server
Server Port Number
Server requires secure connection (SSL)
User Login
Password
Confirm Password
Enter the name of your exchange or SMTP server.
Select the IP port number used for your email server.
By default, this is 25.
Select this if your email server uses a secure connection.
Enter the email account name of the user.
This is the user who will generate purchase order authorisation emails.
Enter and confirm the user's email password.
76
5 | Setting up Sage 200 to use for the first time d. Enter the
E-Mail Details
.
From
This is the email address displayed as the
From
address for email messages sent using this service.
Reply
To
This is the email address used as the
Reply
address for email messages sent using this service.
This can be a different address if you want all replies to go to a centralised email account.
e. To test the email server settings, enter an email address in the
Send E-Mail To
box and click
Send
.
A test email message is sent to the address specified.
f. To save your e-mail settings, click
OK
.
2. Enter the Purchase Order Authorisation settings.
a. From the Navigation bar, choose
Messaging > Purchase Order Authorisation
. The
Purchase Order Authorisation
settings are displayed.
b. To enter or change the settings, click
Edit
.
c. Enter your
Notification Settings
:
Use Email
Notifications
Include Remote
Authorisation Link in
Select this to activate email notifications for purchase order authorisation.
Select this to include a link to the Self Service website on your email notification messages to authorisers.
d. Click
OK
.
3. Identify the Sage 200 user accounts that you want to receive these email messages and enter an email address for these Sage 200 user accounts.
a. From the Navigation bar, choose
Users
.
b. Select a user account.
c. Select the
General
tab. Select
Receive Notifications by Email
.
d. Select the
User Details
tab. Enter an
address for the user.
e. Click
OK
.
77
78
Integrating with Office365
You can integrate Sage 200 with Office365. When you integrate, you can: n
Export all or selected information from workspaces to Excel.
n
Export list items from Sage 200 forms to Excel.
If you have the Microsoft Outlook Client installed on the client PC, you can: n
Open Outlook from email addresses.
n
Attach reports as PDF attachments to an email.
Note:
When you have integrated Sage 200 with Office365, your spreadsheets or documents will open in the Microsoft Office Client (i.e. Excel) or in the Excel browser application, using your default browser, depending on how you have set up Office365.
Setting up the integration is done using the following steps:
1. Set up document library in Sharepoint 2013 Online.
2. Register Application in Sharepoint 2013 Online.
This will add the application to your TeamSite in SharePoint Online.
3. Enter Application ID and Application Secret into Sage 200 via System Administration.
To integrate successfully with Office365, System Administration must store the application details which are needed to request and share authorisation access between the client and
SharePoint.
4. Link Sage 200 to Sharepoint 2013 Online.
To complete the integration you must select the details you added in the Office365 list within
System Administration and select
Action > Complete Integration
.
5. Add the permission request to Sharepoint 2013 Online.
This confirms to SharePoint that the application is trusted for: l
Editing or deleting documents and list items in the site or site collection.
l
Accessing basic information about users of the site.
To set up integration between Sage 200 and Office365
1. Set up document library in Sharepoint 2013 Online.
a. Log in to your SharePoint site from https://login.microsoftonline.com.
b. Click on
Sites.
c. Click on the
Team Site
.
d. Click on the
Site Contents
and select
Add an app
.
e. Click on
Document Library
to add a new library.
79
Sage 200 On Premise o
Enter the library
Name
, Sage200.
Note:
Do not include spaces in Sage200.
o
Click
Create
.
f. Verify that the library has been created by checking that is listed in the
Recent
folder.
2. Register Sage 200 in Sharepoint 2013 Online.
a. Open your web browser.
b. Go to the following secure link, inserting your own Sharepoint company name: https://<companyname>.sharepoint.com/_layouts/15/appregnew.aspx
Note:
You must use a secure SSL - https, not http.
c. Select
App Type: An app running on a web server
.
d. Click
Generate
to create an
App Id
and
App Secret
on the displayed page.
e. Enter a
Title
.
f. Enter the
App Domain
.
For on premise, this should include your server name and the port number of the website. By default, the port number is 10444.
For example, //<Server_Name>:10444
For example, //<sitename>.sage200online.com
80
g. Enter the
Redirect URL
. This is the self service URL with /Office365/ on the end.
For on premise, this would be:
//<Server_Name>:10444/Sage200SelfService/Office365/
The
Redirect URL
takes the details and writes them to the configuration database and completes the operation.
h. Click
Create
.
i. Click
OK
.
Note:
Keep a note of the Client ID, Client Secret, Title, App Domain and Redirect URL so that you can enter this information into Sage 200 System Administration.
3. Within Sage 200 System Administration:
Open: Office365 Integration
.
a. Select the
SharePoint URL
displayed, right click and select
Add Office365
Integration Settings
.
b. Enter the SharePoint Address.
This is the secure link (using SSL - https) that you registered. For example: https://<companyname>.sharepoint.com/ c. Enter the
Application ID
. This was generated as the
Client ID
when you registered the application on SharePoint.
d. Enter the
Application Secret
. This was generated as the
Client Secret
when you registered the application on SharePoint.
e. Click
Create
.
f. Click
OK
.
4. Within Sage 200 System Administration:
Open: Office365 Integration
.
l
Select the
SharePoint URL
displayed, right click and select
Complete Integration
.
l
Refresh the list and you will see that the
Context Token
has been filled with information.
5. Finally, add permissions in SharePoint Online.
a. Open your web browser.
b. Go to the following secure link, inserting your own company name: https://<companyname>.sharepoint.com/_layouts/15/appinv.aspx
Note:
You must use a secure SSL - https, not http.
c. Copy in the
Application ID
from System Administration.
Open: Office365
.
81
Sage 200 On Premise i. Select the SharePoint URL, right click and select
Properties
.
ii. Copy the
Application ID
.
iii. Click
Lookup
.
The application fields are populated. If they are not, check that you have entered the
Application ID
correctly.
iv. In the
Permission Request
box, enter the following xml:
<AppPermissionRequests
AllowAppOnlyPolicy="true">
<AppPermissionRequest
Scope="http://sharepoint/content/sitecolle ction" Right="Write" />
</AppPermissionRequests>
v. Click
Create
.
vi. Click
Trust It
.
82
Set up the Sage 200 desktop
Sage 200 consists of a number of integrated modules. The Financials, Commercials, Project
Accounting and Bill of Materials modules are always installed as part of Sage 200 installation and are activated by your licence key.
Before you begin to work with your company data in Sage 200, you must set up each module to work the way you want.
As Sage 200 is an integrated system you only need enter information once, and it will be used elsewhere in the system by the relevant modules.
Before you can enter transactions in Sage 200, you must: n
Set up common information in the Accounting System Manager.
n
Set up your nominal accounts in the Nominal Ledger.
n
Set up all your customer, supplier and bank account records in Sales Ledger, Purchase
Ledger and Cash Book.
For detailed information about setting up each module, see the Sage 200 help: https://support.sage.co.uk/help/sage200/help.htm
Note:
There is no direct integration between the Manufacturing and Project Accounting modules. If you create a sales order from an estimate in Manufacturing, the project information on any stock items will not be brought through to the sales order line.
83
84
7
Set up Sage 200 Business Intelligence
Once you have installed Sage 200 Business Intelligence, you must complete the following setup tasks: n
Add the BI module to the Sage 200 desktop.
n
Configure Microsoft Excel to use the Sage BI add-in.
n
Set your security settings to use BI.
n
Set up the BI Administration tool.
n
If you are using the Project Accounting cubes, set up your BI project reports to use configurable terms.
This section has a troubleshooting section which covers some of the issues that you may need to be aware of when using the software. It also gives answers to the most common questions that are asked about Sage 200 Business Intelligence.
n
For information on how to install Sage 200 Business intelligence, see
.
n
For information on upgrading an existing installation of Sage 200 Business Intelligence, see
Upgrading BI from v2011 on page 1 .
Note:
Microsoft SQL Server and Analysis Services must be installed on the same machine with the same instance name.
85
Sage 200 On Premise
Using BI with Microsoft SQL Server v2012
If you want to use Microsoft SQL Server 2012 you must configure your SQL Server in the following ways:
1. We recommend that you use the default accounts set up by the SQL server installation wizard. (In previous editions of Microsoft SQL Server, we recommended running SQL Server as Local System Accounts.)
2. The
SQL service start-up
account for SQL Server Analysis Services, created as part of the
SQL 2012 setup wizard (the NT Services\MSSQLServerOLAPService user in the above example), is not set up as an SQL login on the database instance. A manual setup is required.
To create the SQL Login and assign the correct admin privileges: a. Open SQL Server Configuration Manager.
b. Select
SQL Server Services
for the instance you are installing to.
c. Right click
SQL Server Analysis Services
and select
Properties
.
Make a note of the
Account Name
.
d. Close the
Analysis Services Properties
and
SQL Server
Configuration manager
.
e. Open
SQL Server Management Studio
. Connect to the database instance which will host the data warehouse.
f. Navigate to the
Security > Logins
area.
g. Right click
Logins
and select
New Login
.
h. Make sure
Windows Authentication
is selected and choose
Search
next to
Login Name
.
i. Enter the account name noted in Step c.
86
7 | Set up Sage 200 Business Intelligence j. Click
Check Names
to make sure a valid user has been selected.
k. Click
OK
.
l. Select
Server Roles
.
m. Select
sysadmin
. Make sure only
Sysadmin
and
public
roles are selected.
n. Click
OK
.
3. Once you have set up Sage 200 BI and all of your data warehouses have been created, we recommend that you reduce the permission level for the
start-up
user account of the SQL
Analysis Services in SQL server login to the minimum required level.
The minimum required permissions to access the BI Admin Tool are: l
A domain user, as long as they are an administrator in Analysis Services (see
Microsoft SQL Server security settings).
l
A member of the Sage 200 Administrator's group, with access to the relevant Sage
200 company in System Administration.
l
A domain user that has a 'dbcreator' SQL server role assigned (needed for creating a new data warehouse).
To set the minimum required permissions for the SQL Analysis Services
start-up
user account in SQL server: a. Open
SQL Server Management Studio
and connect to the database instance which hosts your data warehouse(s).
b. Navigate to the
Security > Logins
area.
c. Right click the SQL server login that corresponds to the start-up user account of the SQL Analysis Service
(
NT Services\MSSQLServerOLAPService
in the example above) and select
Properties
.
d. In the
Server Roles
section, clear the
sysadmin
option.
Only the
public
role should remain selected.
e. Select
User Mapping
.
f. For each of your data warehouses, select Map and select
db_ datareader
role. Make sure only the
public
and
db_datareader
roles are selected.
g. Click
OK
.
87
Sage 200 On Premise
Set up Business Intelligence in Sage 200
System Administration
Before you can access BI from within Sage 200, you must authorise the BI features for the appropriate roles in the Sage 200 System Administration tool.
To enable the BI features in System Administration
1. Open
Sage 200 System Administration
.
The Core Components for Business Intelligence are installed the first time you log on to Sage
200 System Administration after installing BI.
2. From the Navigation Bar, select
Roles
.
3. Select the
Role
that you want to use BI. Right-click and select
Features
.
4. Make sure
BI Reports
is selected.
5. Click
OK
.
For more information about user accounts, role, and features, see the Sage 200 help: https://support.sage.co.uk/help/sage200/help.htm
.
88
7 | Set up Sage 200 Business Intelligence
Configure Microsoft Excel to use the Sage
Business Intelligence add -in
You must enable the Sage BI Excel Add-in to use it with Microsoft Excel.
The BI reports use macros. If your Microsoft Excel security settings are set too high, some of these macros will not run and you will see a warning on the report. To make sure the macros run without a warning, we recommend that you set up a trusted location for your BI reports in Excel.
If you do change your Microsoft Excel security settings, potentially unsafe macros may run when you open other workbooks created outside BI. Therefore we recommend that when you use
Microsoft Excel without BI, you disable the Sage BI add-in. This resets the Microsoft Excel security settings and Excel will start more quickly.
To enable the Sage BI Excel add-in for Sage 200
1. Choose
Start > Sage Tools > Sage 200 > Enable or Disable Sage BI
.
l
To use Microsoft Excel with Sage BI, select
Enable the BI Excel Add-in
.
l
To use Microsoft Excel without Sage BI, select
Disable the BI Excel Add-in
.
2. Click
OK
.
To set up a trusted location for BI in Microsoft Excel
To do this you must add the shared Sage folder on your server to the list of trusted locations on each client PC that uses BI.
1. In Microsoft Excel, select the
File
tab and then click
Options
.
2. Select
Trust Center
and then choose
Trust Center > Trust Center Settings > Trusted
Locations
.
3. Make sure that the
Allow trusted locations on my network
is selected.
4. Click
Add New Location
.
5. Enter or browse for the location of the shared
Sage
folder on your server.
6. Select
Subfolders of this location are also trusted
.
7. Click
OK
.
89
Sage 200 On Premise
Set up security for Business Intelligence
You must make sure that the appropriate users have access to the Sage 200 BI SQL database, and that the SQL database and Microsoft Analysis Services are included in your firewall exceptions list.
To set the SQL server security settings
This allows non administrator users to have access to the Sage 200 BI database.
1. Choose
Start > Programs > Microsoft SQL Server > SQL Server Management Studio
.
2. From the
Server
type, select
Analysis Services
.
3. From the
Server
name list, select the required instance and click
Connect
.
4. Right-click on the server instance and choose
Properties
.
5. From the
Select a page
list, choose
Security
.
6. Click
Add
.
7. Enter the name of each BI user in the format,
DomainName\Username
and click
OK
.
The names you have added are listed
8. Enter the name of the domain user you will use to run the BI Admin tool in the format
DomainName\Username
and click
OK
.
9. When you have added all the required users, click
OK
in the
Analysis Server Properties
window.
To set the Windows Firewall settings
If you are using Windows Firewall, you need to ensure that the Microsoft SQL database and
Analysis Services programs are included in the firewall exceptions list: n
SQL Server (sqlservr.exe).
n
SQL Analysis Services (msmdsrv.exe).
n
If you are using named instances of SQL and Analysis Services, also include SQL Browser
Service (sqlbrowser.exe).
90
7 | Set up Sage 200 Business Intelligence
1. Choose
Start > Settings > Control Panel
.
2. Open
Windows Firewall
.
l
If you are using Windows Vista, click
Allow a program through Windows
Firewall
.
3. Select the
Exceptions
tab.
4. Add the SQL Server application to the exception list of allowed programs: a. Click
Add Program
, then click
Browse
.
b. Browse to the program file for SQL Server -
sqlservr.exe
.
Typically, this file will be located in
Program Files\Microsoft SQL
Server\MSSQL\Binn
.
c. Click
Open
then click
OK
.
The program is added to the exceptions list.
5. Add the
SQL Analysis Services
application to the list of allowed programs: a. Click
Add Program
, then click
Browse
.
b. Browse to the program file for SQL Analysis Services -
msmdsrv.exe
.
c. Click
Open
then click
OK
.
The program is added to the exceptions list.
6. Users running named instances of SQL and Analysis Services also need to add the
SQL
Browser Service
program to the exception list of allowed programs: a. Click
Add Program
, then click
Browse
.
b. Browse to the program file for the SQL Browser Service -
sqlbrowser.exe
.
c. Choose
Open
then
OK
.
The program is added to the exceptions list.
91
Sage 200 On Premise
Set up the BI Administration tool
Before you start Sage 200 BI for the first time, you must use the Sage 200 BI Administration tool to build the cubes required for each Sage 200 company.
A cube holds every different available view point that can be used to analyse data. This means you can quickly and easily change the values displayed on a report.
To set up the Business Intelligence Administration tool, you must: n
Apply your report settings. This sets up the way Sage 200 BI works.
n
Build your cubes.
Note:
You must be a member of the Sage 200 Administrators group to access the BI
Administration tool.
Set up windows users for the BI Admin tool
You must install and use the BI Administration tool on the Sage 200 Server to create and maintain your BI cubes. The BI cubes data is refreshed regularly. This data refresh is performed by Windows
Scheduled Tasks.
Required permissions to access the BI Admin Tool
Sage 200 BI uses your Windows user account details to access the BI Administration tool. To access the BI Administration tool, your windows user account must be: n
A domain user as long as they are an administrator in Analysis Services (see
), n
A member of the Sage 200 Administrators group.
n
Have access to the relevant Sage 200 company in System Administration.
n
A domain user that has 'dbcreator' level permissions in SQL Server.
Create a Windows user account for the scheduled task
You must specify a windows user account that will run the scheduled task for BI to update the cubes.
We recommend that you create a windows user account specifically for this task. The user specified to run the Windows Scheduled Task must: n
Have a secure password that never expires.
We recommend that you keep a note of the password for this account until you have set up the BI Administration tool and the scheduled task is running successfully.
92
7 | Set up Sage 200 Business Intelligence n
Have the following privileges: l
Be a member of the Sage 200 Administrators group.
l
Have access to the relevant Sage 200 company.
l
Be a local administrator on the Sage 200 server.
l
Be an administrator in Analysis Services.
l
Be a user in SQL Server with sysadmin access.
Note:
If this user does not appear in the user list in the BI Admin tool, we recommend that you create a new user in Active Directory. This is due to the Windows user not having a
User
Principle Name
. A User Principle Name is a part of the Active Directory user information. This information is sometimes missing on older user accounts, especially if they have been migrated from an older version of Active Directory and the domain administrator account.
As the BI data is generally refreshed overnight it is important the Sage 200 application server is powered on overnight so the Windows Scheduled Tasks can run.
Apply BI report settings
1. On the
Data Warehouse Configuration
window, highlight the required company.
2. Click
Report settings
.
3. On the
General
tab, use the
Period
and
Year
drop-down lists to select the default accounting period and year that you want to use for your reports.
Note:
If you leave the
Period
and
Year
boxes blank, the current date is used to determine the default accounting period and year.
4. Use the
Month
and
Year
drop-down lists to select the default calendar month and year that you want to use for your reports.
Note:
If you leave the
Month
and
Year
boxes blank, the current date is used to determine the default calendar month and year.
5. On the
Nominal
tab, use the drop-down lists to select the default financial statement layouts for your Balance Sheet and Profit and Loss reports.
93
Sage 200 On Premise
6. On the
Customers
tab, in the
Discount Bands
boxes, type the lower percentage rate for each band. These must be in ascending order.
The discount bands are used to group settlement discounts on invoices. If you do not enter any discount bands, you will only see the
Zero
and
>0%
discount bands in your reports.
For example:
If you enter
2
for Band 1,
4
for Band 2 and
6
for Band 3, you will be able to select the following discount bands in the reports: l
Zero
,
0-2%
,
2-4%
,
4-6%
and
>6%
.
A discount of 2% will fall in the
0%-2%
band and not the
2%-4%
band
7. If you only want to bring through the Analysis Codes you have named, select
Show Named
Customer Analysis Codes Only
and
Show Named SOP Analysis Codes Only
.
Otherwise all Analysis Codes will be brought through to the cubes.
Note:
If you have set up the Sage 200 Sales Ledger to use separate trading periods, you can select the default trading period you want to use for your reports. Select this from the
Current Sales Trading Period
drop-down list.
8. On the
Suppliers
tab, complete all the
Discount Bands
boxes as appropriate.
9. If you only want to bring through the Analysis Codes you have named, select
Show Named
Supplier Analysis Codes Only
and
Show Named POP Analysis Codes Only
.
Otherwise all Analysis Codes will be brought through to the cubes.
Note:
If you have set up the Sage 200 Purchase Ledger to use separate trading periods, you can select the default trading period you want to use for your reports. Select this from the
Current Sales Trading Period
drop-down list
10. On the
Stock
tab, select all the
Search Categories
as appropriate. You can use these for analysis on your reports.
11. If you only want to bring through the Analysis Codes you have named, select
Show Named
Stock Analysis Codes Only
. Otherwise all Analysis Codes will be brought through to the cubes.
12. On the
Project
tab, select the
Additional Information
fields as appropriate.
You must specify which of the project
Additional Information
fields in Sage 200 are
Text
,
Numeric
, date and time (
Time
), a yes or no answer (
Boolean
) or a selection from your lists of products, customers, suppliers or resources (
ID
).
For more information about setting up Additional information fields for you projects, see the
Sage 200 Help.
94
7 | Set up Sage 200 Business Intelligence
13. When you have entered all the required information, click
Save
.
You can now create a data warehouse and build the cubes.
Note:
If you later change your report settings, you will only see the changes take effect after the cubes have been updated. The cubes will usually be updated by running a scheduled task, but if you want to update the cubes manually see
Configure the data warehouse
1. Choose
Start > Programs > Sage Tools > Sage 200 > Sage 200 Business Intelligence
Administration
.
2. The Data Warehouse Configuration window opens. This displays a list of your Sage 200 companies. Use this to: l
Apply various report settings such as discount bands, analysis codes, report layouts and the financial period.
l
Create a new data warehouse for a company.
l
Change the details of the scheduled task, for example, the time and frequency of the cube update.
l
Upgrade the data warehouse for the selected company.
Use this when you have installed a new version of Sage 200.
l
Refresh the cubes for the selected company.
Use this if you have changed your report settings.
Create a new data warehouse and create the cubes
Important
This task must be carried out on the Sage 200 Server. You must be logged on to the server with a user that has administrator privileges.
To build the cubes for a company, you must add a new data warehouse for each company.
1. On the
Data Warehouse Configuration
window, click
New warehouse
.
2. From the
Company
drop-down list, select the first company you want to configure.
3. Enter a unique name for your
Data Warehouse
and
Analysis Services cube
in the respective boxes. Click
OK
. A
Scheduler Security
window appears.
95
Sage 200 On Premise
4. Enter or browse for the details of the windows user to run the Windows Scheduled Task.
Select the user you have set up for the scheduled task. See
Set up windows users for the BI
A progress bar appears indicating that the warehouse and cubes are being updated. This process may take some time to complete. Once completed: a. A data warehouse is created.
b. The cubes are built.
c. A scheduled task is created which rebuilds the cubes nightly at 3 am.
If required, you can change the settings for this scheduled task.
Configure the scheduled task
Note:
Scheduled Tasks is a Microsoft product. For help on Scheduled Tasks, please refer to the Microsoft Windows help file.
1. Click
Schedule tasks
. The
Task Scheduler
appears.
2. From the left-hand pane, select
Task Scheduler Library
.
3. Right-click the
UpdateCube
task for the required company and select
Properties
.
96
7 | Set up Sage 200 Business Intelligence
4. Select the Windows user account that you have created for the scheduled task.
5. Make any other required changes to the task and click
OK
.
To upgrade a warehouse
If you have installed a new version of Sage 200 and updated the company database, you will also need to update the corresponding warehouse database so that the version numbers of both databases match.
n
Click
Upgrade Warehouse
to update the database version of the selected warehouse. This will also refresh the cubes.
To refresh cubes
Use refresh cubes to rebuild the cubes for a company. If you have changed your report settings, you must refresh the cubes for the changes to take effect.
n
Click
Refresh cubes
to update the cubes for the selected company. A message appears showing the progress of the update.
This may take some time to complete, depending on the size of the database.
97
Sage 200 On Premise
Set up BI in Sage 200
1. On the Sage 200 Navigation Bar, click
Business Intelligence
. The Sage 200 BI report folders appear at the top of the Navigation Bar.
2. Double-click on a report to open it in Microsoft Excel.
Set up Project reports
You can set up Sage 200 Project Accounting to use terminology that is familiar to your business, such as
Job
rather than
Project
.
Business Intelligence automatically uses these configurable terms when you create or update the
Project Accounting cubes. This is to make sure that your reports match the terms that have been set up in Sage 200.
However, the standard project reports in BI have been created using the default terminology from
Sage 200. Before using the standard project reports in BI, you must amend them to match the terminology you have set up in Sage 200.
To change the configurable terms
For each project report:
1. Open the report.
2. Select each item that has used a configurable term.
3. Re-select the item using the new term.
For example, if you have used
Job
as the label for your
Projects
, you must re-select
Job
for each incidence where
Project
is currently specified on the report.
Report Types
Sage 200 BI provides standard and user defined reports. Reports in the user defined category can be used as templates for your own reports.
In a standard report, you can: n
Change the report title.
n
Expand the row and column data on the report.
n
Change the report criteria.
n
Create charts that link to the report data.
n
Sort and filter the information on the report.
n
Apply row and column sub totals.
n
Format cells whose values fall above, below or between specific values.
n
Create several versions of the same report using different criteria.
98
7 | Set up Sage 200 Business Intelligence n
Apply Sage 200 BI formats to the report.
n
Use the Report Layout panel and Report Layout wizard to change what is displayed on the report.
99
Sage 200 On Premise
Troubleshooting BI
Use this section for a an explanation of some common errors that may occur in Sage 200 BI. This covers the following errors:
BI Administration tool n
Changing your Sage 200 database on page 100
n
Backing up and restoring BI databases on page 100
n
Losing cube changes after an upgrade on page 101
n
Manually creating a scheduled task to update the cubes on page 101
n
Sage BI Admin tool takes a long time to open on a PC with no internet access on page 102
n
Data not populating 'As At' date when creating a Data Warehouse on page 102
Excel Add-in for BI n
Failed to link to database error on page 102
n
Re-enabling the Sage 200 BI Add-in in Excel on page 102
n
Sage BI tab missing when launching Excel on page 103
n
Excel security warning when opening a report on page 103
n
BI reports n
Company name and time not updated in a modified standard report on page 103
n
Profit & Loss and Balance Sheets layouts with the same name on page 104
n
The filters do not display on the report on page 104
n
Customised reports showing out of date information on page 104
n
Report layout screen appears by default on page 104
n
Adding filters to reports on page 104
n
Unexpected results from the Inactive Supplier and Inactive Customer Reports on page 104
n
Errors when creating a new connection on page 104
BI Administration tool
Changing your Sage 200 database
If you want to use a different Sage 200 database for your company, you must delete your existing warehouse and cubes and rebuild them.
Backing up and restoring BI databases
To backup or restore your Sage 200 BI warehouse database, as with Sage 200, use Microsoft SQL
Server Management Studio.
100
7 | Set up Sage 200 Business Intelligence
The Sage 200 company database must remain in sync with the Sage 200 BI warehouse database and Analysis Services database. Therefore, if you backup or restore your Sage 200 company database you should restore the Sage 200 BI warehouse database and Analysis Services database at the same time.
Losing cube changes after an upgrade
If you customise your cubes (e.g. add new fields), those changes will be lost when you upgrade to a new version of Sage 200 BI or use the
Upgrade warehouse
option.
Manually creating a scheduled task to update the cubes
Important
: Scheduled tasks must be created on the machine that hosts the Sage 200 Server. This will avoid problems related to connection issues when the user is not present.
Note:
The procedure below describes how to manually set up a task using Windows 7. There will be differences in this procedure when using other versions of Windows. Scheduled Tasks is a Microsoft product. For help on Scheduled Tasks, please refer to the Microsoft Windows help file.
1. Choose
Start > Control Panel
.
2. Open
System and Security > Administrative Tasks > Schedule Tasks
.
3. Select the
Task Scheduler Library
.
4. Select
Create Task
from the
Actions
pane.
5. Enter a name for the task.
6. Select the user you have specified to run the scheduled task.
See
Before using the BI Admin tool .
7. Select
Triggers
and click
New
.
8. Select the required options for performing the task and click OK.
Note:
It is advisable to rebuild the cubes on a daily basis outside of working hours so they do not conflict with any backup operations.
9. Select
Actions
and click
New
.
10. Select
Start a program
from the Actions drop-down list.
11. Click
Browse
.
12. Select the file
Program Files\Sage\Sage200\ScheduledUpdateCubes.exe
and click
Open
.
13. Amend the path as follows (changes in bold), where the number after /
n
corresponds to the company number in the Sage 200 BI Administration tool.
C:\Program Files\Sage\Sage200\ScheduledUpdateCubes.exe / n:1
14. Click
OK
.
101
Sage 200 On Premise
15. Click
OK
. The new task is added to the Scheduled Tasks.
16. To ensure your new task has been set up correctly, right-click the task and select
Run
.
Sage BI Admin tool takes a long time to open on a PC with no internet access
If you are running the Sage 200 BI Administration Tool on a machine that does not have internet access, it can take up to two minutes to open.
This occurs because the BI Admin tool needs to run with administrative credentials. In order to ensure a secure connection, the tool attempts to checks for revoked certificates online.
To speed up opening the Admin tool, it is possible to turn off this check.
Important
: This setting should only be changed on a PC that does not connect to the internet. If the
PC is later connected to the internet, the original setting must be restored.
1. Open Internet Explorer.
2. Select
Tools > Internet Options > Advanced
.
3. Scroll down the
Settings
list to the
Security
section.
4. Clear the checkbox for
Check for publisher's certificate revocation
.
5. Click
OK
and close Internet Explorer.
Data not populating 'As At' date when creating a Data Warehouse
When the data warehouse is populated (either via a data warehouse update or a refresh), a
'snapshot' of that data is recorded and stored for the Sales Order and the Stock Level cubes.
If the date of the data extract is not in the financial year defined for Sage 200, the data warehouse will not be populated with Sage 200 data.
A message will be written to the data warehouse audit trail (in the AuditHeader and AuditDetail tables) to inform you that the update has failed.
BI Excel Add-in
Failed to link to database error
If you try to run a BI report and the message
Failed to link to Database
is displayed, this means
Sage 200 BI cannot connect to the Analysis Services database.
This will appear if you do not have permission to access Analysis Services. For information on setting permissions, see Microsoft SQL Server security settings.
Re-enabling the Sage 200 BI Add-in in Excel
If Sage 200 Business Intelligence has problems connecting to the database and fails, it can become disabled as an add-in in Excel. The most common symptom of this is seeing the text
#NAME
in the report cells.To re-enable the add-in:
102
7 | Set up Sage 200 Business Intelligence
1. From the
Start
menu, select
Program Files > Sage Tools > Sage BI > Enable or Disable
Sage 200 Business Intelligence
.
2. Select
Enable
.
3. Click
OK
.
Sage BI tab missing when launching Excel
When you open Microsoft Excel from outside Sage 200, the Sage BI tab is not displayed.
To resolve this, you must check your Trust Center settings for Add-Ins .
1. Open
File > Options > Trust Center > Trust Center Settings > Add-Ins
.
2. Make sure that none of the options are selected.
Excel security warning when opening a report
When you open a BI report in Excel, you may see a security message warning you that the document contains macros.
If you see this message, you must enable the macros for the BI reports to work correctly. To do this:
1. Select
Always trust macros from this publisher
.
2. Click
Enable Macros
.
This action should only be required once for any user on any particular PC.
Excel 2013
Office 2013 must be fully activated to use the BI Add -In. If Office 2013 is not activated you may experience issues with Excel.
BI Reports
Company name and time not updated in a modified standard report
A modified report is a standard report that has been changed and saved.
These modified Sage 200 BI reports may display the incorrect company name and time if: n
You open a standard BI report from the Sage 200 menu bar and save a modified copy.
n
Next time, you open the modified report in Excel.
The company name and time information on the modified report will not be refreshed in the version displayed in Excel. The report will still show the company, date and time information from the previous time that the report was created.
Note:
The data in the report will be correct.
To avoid this problem, we recommend that you run your modified reports from the Sage 200 menubar.
103
Sage 200 On Premise
Profit & Loss and Balance Sheets layouts with the same name
If you have Profit & Loss and Balance Sheet layouts with the same name: n
You cannot refresh your data cubes.
n
These reports will show the same categories (i.e. they will show the same information).
To display the correct information, the default financial statement layouts in Sage 200 must have different names.
You set up this name in the
Report Settings >Nominal
tab.
The filters do not display on the report
This can occur if you have entered conflicting criteria for your filters using attributes from the same dimension. For example, you have a filter for both country code and country name on the same report. You select a country code and then select a different country name.
To resolve this, open the report layout to change the filters.
Customised reports showing out of date information
Whilst loading a new or customised report, BI will display the data that was current when the report was created or customised. This may not reflect the current accounts data.
Once the report has been fully loaded, this situation will be corrected and BI will display the most upto-date information.
Report layout screen appears by default
The Report Layout Screen may appear when a report is loaded. Close this screen if it is not needed.
This does not affect the data in the report.
Adding filters to reports
When attempting to add a filter via the
Report Layout Wizard
, the Add-in may restore the previous query and continue. When this occurs a message box appears.
Unexpected results from the Inactive Supplier and Inactive Customer
Reports
The
Inactive Supplier
and
Inactive Customer
reports measure activity based on transaction period, rather than transaction date.
If a customer or supplier has a transaction in a recent period, they will not be flagged as inactive.
Errors when creating a new connection
When creating a new report connection, the following may occur:
104
7 | Set up Sage 200 Business Intelligence n
The
Server Cubes
drop-down list is empty.
If this occurs, enter the name of the Analysis Services Instance and then click
Next
.
n
Using the
Back
and
Next
options produces an error meesage.
If this occurs, cancel the connection and start again.
Sub totals not appearing when using Suppress Empty/Rows columns
In some circumstances,
Sub-Totals
are not displayed on BI reports when the
Suppress Empty
Rows/columns
option is selected.
We recommend that you do not suppress empty rows and columns if you want to display sub-totals on your reports.
Cannot edit an excel spreadsheet embedded in a word document
To edit an Excel spreadsheet that is embedded in a Word document, you must disable the BI Excel
Add-in first.
If the BI Excel Add-in is not disabled the following error message is displayed:
1. Close Microsoft Excel and Microsoft Word.
2. Use the
Windows Task Manager
to close any Microsoft Excel processes that may still be running.
3. Disable the
BI Excel Add-In
.
The layout pane does not automatically select items that are not on the first page
If you have selected an item with more than 100 members, the list of members is displayed on the
Layout
pane, on pages of 100 items each.
You can add an item to a report with members selected from any page of the list. If you then amend the selections for that item, any items originally selected that are not on the first page (i.e. not in the first 100), will not remain selected. Make sure you reselect these items, before you apply your changes.
105
Sage 200 On Premise
FAQs: Business Intelligence
This section covers some frequently asked questions about BI in the following areas:
BI Reports n
Can I run the same report in different companies? on page 106
n
How do I send reports to non Sage 200 BI users? on page 106
n
How do I change my report type? on page 106
n
How do I save or change a report? on page 107
n
How do I add analysis codes to reports? on page 107
n
How do I change from fixed to variable rows and columns? on page 108
n
How do I change row and column referencing? on page 108
Excel Add-in n
How do I remove the drill indicator? on page 109
n
Why are some options not available on the Sage BI ribbon on page 109
BI Administration Tool n
When I update my cubes, can I see a log of events? on page 110
n
How do I delete the Data Warehouse and Analysis Services databases? on page 110
Sage 200 desktop n
How do I add a BI report to the menu in Sage 200? on page 110
BI Reports
Can I run the same report in different companies?
You cannot do this if the companies have a different nominal ledger structure or different sales analysis codes. If you have selected a field, such as
Customer
, for one company and you then select a different company that does not have that field, the report will reset itself.
How do I send reports to non Sage 200 BI users?
You should:
1. Change the report type to
static
.
2. Save the report then send it to the user.
How do I change my report type?
There are two types of report: Dynamic and Static. All Sage 200 BI reports are dynamic - they consist of a range of formulas and styles. A static report has no formulas, styles or formatting.
However, you can apply Microsoft Excel styles and formats to a static report.
106
7 | Set up Sage 200 Business Intelligence
To change the report type to static
n
Right-click any cell in the report and choose
Report Type > Static
.
To change the report type to dynamic
n
Right-click the report title cell (the top left cell of the report) and choose
Report Type >
Dynamic
.
How do I save or change a report?
The Sage 200 BI standard reports are read-only. You can make changes to the reports and save them using the Microsoft Excel
Save As
command.
Note:
There is no guarantee that any customised reports will work with future versions of the software. This is because the structure of the cubes may change.
You must save an edited report with a unique name.
How do I add analysis codes to reports?
Report criteria appear at the top of the report underneath the report title and company name.
By default, analysis codes do not appear on standard reports as report criteria. You can, however, add them using the
Field List (to select from)
pane on the
Report Layout
panel.
n
To place the analysis codes on the report as report criteria, select the check box next to relevant code.
107
Sage 200 On Premise n
To place the analysis codes on the report rows or columns, click and drag the code from the
Field List (to select from)
pane to the
Report Rows
or
Report Columns
panes.
n
To add the codes to the report, click
Apply
.
Note:
For more information about the
Report Layout
panel, please refer to the Sage 200 BI help topic
Report Layout
.
How do I change from fixed to variable rows and columns?
A report can have variable or fixed rows and columns. When a report has variable rows and columns, the report is redrawn each time it is changed. When a report with fixed rows and columns is changed, the report is recalculated but not redrawn. Some of the standard reports have fixed rows and columns. You can change these to variable rows and columns as follows:
1. Open the
Report Layout Options
window.
l
If you are using Excel 2007: On the
Sage BI
tab, click the
File Group
window launcher.
2. On the
Report Layout Options
window, select the
General
tab.
3. Select
Variable Rows & Columns
.
Tip:
To expand or hide report row or column data, double-click on the headings and select
Allow drill down on Report
.
4. Click
OK
.
How do I change row and column referencing?
Usually, in a Microsoft Excel worksheet, rows are numbered from 1 upwards and columns are lettered from A upwards.
Some worksheets use the ‘R1C1’ method of cell referencing where both rows are numbered from 1 upwards.
108
7 | Set up Sage 200 Business Intelligence
If you prefer to use the more common A1 style of referencing cells, it can be helpful to change the referencing style. You can do this as follows:
For Excel 2010 or 2013
1. Select the
File
tab then click
Options
. The Excel Options window appears.
2. On the left-hand pane, click
Formulas
.
3. Under
Working with formulas
, clear the
R1C1 reference style
check box and click
OK
.
For Excel 2007
1. Click the
Office
button then click
Excel Options
. The
Excel Options
window appears.
2. On the left-hand pane, click
Formulas
.
3. Under
Working with formulas
, clear the
R1C1 reference style
check box and click
OK
.
Excel Add-in
How do I remove the drill indicator?
In Sage 200 BI , cells that allow you to expand or hide information have the following indicator:
If required, you can remove this:
1. On the Microsoft Excel ribbon, select the
Home
tab and in the
Styles
group, click
Cell
Styles
.
2. Right-click
IAParentRowHeader
or
IAParentColumnHeader
and choose
Modify
. The
Style window appears.
3. Clear the
Number
check box and click
OK
.
4. To apply the change, click
Report Layout
on the
SageBI
tab.
5. On the Report Layout panel, click
Apply
.
Why are some options not available on the Sage BI ribbon
Some options on the BI ribbon are only available when a cell containing data is selected on the current BI report.
109
Sage 200 On Premise
BI Administration tool
When I update my cubes, can I see a log of events?
You can use Windows Event Viewer to see when you have performed a cube update.
The Event Viewer displays this information in the
200 BI Diagnostics area
; or, if using Windows
Vista, in
Application and Service Logs \ Sage 200 BI Diagnostics
.
How do I delete the Data Warehouse and Analysis Services databases?
1. Open the Sage 200 BI Admin Utility.
2. On the
Data Warehouse Configuration
window, highlight the appropriate Sage 200 company. Press the
Delete
key.
3. You will be prompted to confirm deleting the Data Warehouse and Analysis Services databases for the company. Click
Yes
to delete the databases.
4. You will then be prompted to confirm whether you want to delete the report settings for the company. If you intend to recreate the databases, you may want to click
No
and keep the report settings.
Sage 200 desktop
How do I add a BI report to the menu in Sage 200?
Before you add a report to the Sage Business Intelligence menu, you should ensure that the report resides in the location where the reports are installed. By default, this is
C:\Sage\Reports\Business Intelligence
followed by the relevant folder, e.g.
User Defined
.
Add a new feature in System Administration
1. Choose
Start > Programs > Sage Tools > Sage 200 > System Administration
. The
Logon
window appears.
2. Enter your logon details and click
OK
. The
System Administration
window appears.
3. From the Navigation bar, click
Features
.
4. Open the
BI Reports
folder.
5. Right-click the
User Defined
folder, and select
Add New Feature
.
6. Enter the
Name
. Click
New GUID
to enter a GUID for the feature.
7. Click
OK
to add the new feature.
8. To ensure the new feature has appropriate authorisation, right-click the feature and select
Role Authorisation
. Add the required roles as authorised roles and click
OK
.
110
7 | Set up Sage 200 Business Intelligence
9. Select the new feature, and in the
Feature Properties
pane select the
Targets
tab and click
Add
. The
Add New Target
window appears.
10. Enter a
Target Name
.
11. Set the
Target Type
as
Form
.
12. For the
Target Action
, type the path to the report file in the reports folder, without including the
.xls
file extension.
For example, say your report is located in
Sage\Reports\Business Intelligence\User
Defined\My Report.xls
. For the Target Action, you would just enter
User Defined\My
Report
.
Note:
You cannot use the browse (...) button to select the path to the report.
13. Click
New GUID
to enter a Target GUID.
14. Enter a
Target Description
.
15. Set the
Target Launcher
as
Sage.MMS.BILauncher
.
16. To save the target properties, click
Save
.
17. You can now close the System Administration. Next add a new menu item for this feature in
Sage 200.
Add a new menu item in Sage 200
1. Open Sage 200.
2. Click at the top of the menu, to change it to
Edit
mode.
111
Sage 200 On Premise
3. Click and select
New Menu Item
.
4. Enter the menu item
Title
.
5. Select the target you created In System Administrationfrom the target tree.
This will be located in
BI Reports > User Defined
.
6. Click
OK.
7. The new menu item appears the bottom of your menu. You can then drag it to the required folder.
112
8
Set up Sage 200 Manufacturing
Once you have installed Sage 200 Manufacturing, you must complete the following set up tasks: n
Set up Manufacturing in Sage 200 System Administration.
n
Set up the Manufacturing modules in Sage 200.
n
If you have copied the Sage 200 Graphical Planner installation files, you must install Graphical
Planner and activate it.
For information on how to install Sage 200 Graphical Planner, see
.
For information on upgrading Graphical Planner, see Upgrading Graphical Planner on page 1 .
For information on how to install Sage 200 Manufacturing, see
Installing Sage 200 on page 45
.
For information on upgrading an existing installations of Sage 200 Manufacturing, see Upgrading to Sage
200 Manufacturing v2010 on page 1 .
Guidelines if you are using Bill of Materials with Manufacturing
Some of the information that you can enter and use in the Bill of Materials module, cannot be used in the
Estimating, Planning and Works Orders modules.
If you plan to use the Bill of Materials modules with the other Manufacturing modules, follow these guidelines for creating operations.
n
On the
Operation Record Details
tab, do not use
Overlap Quantity
or enter
seconds
values for the resource.
n
On the
Operation Record Resources
tab do not enter
seconds
values for the resource. Ensure that you add only the following resources with the following settings:
113
Sage 200 On Premise
Phase
Setup
How many
Resource
Types?
Resource Type
Two
Primary/Secondary Fixed
Length
Select no more than two resources for this phase. You can select a labour setup resource (
Labour Resource
or
Labour Resource Group
) and a machine setup resource
(
Machine Resource
or
Machine
Resource Group
), but you cannot select two labour or two machine setup resources.
Select
Primary
or
Secondary
for one or the other resource.
You must select
Fixed
Length
for the resource.
Note:
Adding a
Labour
Resource
or
Labour
Resource Group
updates the
Include in Labour
Requirements
check box on the works order operation when a works order is created from the
BOM record.
Runtime
Three Select one
Labour Resource
or
Labour Resource Group
.
Select one
Machine Resource
or
Machine Resource Group
.
Select one
Tool Resource
or
Tool Resource Group
.
Note:
Only select a tool resource or resource group if you have also selected a labour and a machine resource or resource group.
Select
Primary
for either your labour or machine
Resource
Type
and
Secondary
for the other.
Note:
Do
not
select either
Primary
or
Secondary
for your tool
Resource
Type
selection.
Do not select
Fixed
Length
for the resource or resource group.
Teardown
None n
On the
Operation Record Subcontract
tab, add only one supplier and no more than five
Quantity Breaks
. The supplier must use base currency.
114
8 | Set up Sage 200 Manufacturing
Note:
If the BOM record has been created by converting a one-off works order into a BOM, an operation resource is added to the BOM record automatically. Do not rename this operation. If you do, you will not be able to update information between the BOM and the Works Order.
Set up Manufacturing in Sage 200 System
Administration
Before you can access the Manufacturing modules from within Sage 200, you must authorise the
Manufacturing features for the appropriate roles within Sage 200 System Administration.
The Manufacturing features are arranged according to the individual modules. These are Bill of
Materials, Manufacturing System Manager, Estimating, Planning, Works Orders.
See
Set up user accounts, roles and features on page 72
Set up Manufacturing in Sage 200
Before you begin to process data, you must set up the Manufacturing modules to work in the way that you want.
The following suggests a typical setup sequence. The setup sequence you use depends upon the nature of your business and how you intend to use your Manufacturing software. Therefore, you should adapt the checklist to your requirements.
We recommend that you:
1. Identify those parts of the setup sequence that apply to you.
2. Follow the suggested setup sequence in the set up.
3. Set up your system accordingly.
Operation Times is an additional Manufacturing module which puts you in charge of your
Manufacturing shop floor operation times. It runs alongside the Works Orders module. To run
Operation Times
, click on the
Sage 200 Manufacturing Operation Times
shortcut in the folder where you have installed Sage 200. You can copy the shortcut to your desktop. The Operation
Times application can only be run on a PC that has Sage 200 Accounts and Manufacturing installed.
It cannot be run ‘standalone’ on a separate PC.
For more information about how to set up the Manufacturing modules, see the Sage 200 help: https://support.sage.co.uk/help/sage200/help.htm
For information about how to process data in Manufacturing, see the
Processing data in
Manufacturing
topic.
115
Sage 200 On Premise
Note:
Manufacturing operations contain details relating to labour and machine processes. You can set up operation details for individual BOMs or estimates. But, if you plan to use the operations regularly across a range of finished items, you should first set up and store the details within the Operations Register. You will significantly reduce the time spent setting up BOMs or estimates later.
Note:
The following characters are supported in the Bill of Materials module, but not in other
Manufacturing modules:
Apostophe (
'
)
Quotation (
"
)
To set up Manufacturing
1.
Set up supplier and customer details, stock control system, sales order processing and purchase order processing defaults.
2.
Set up Overhead Recovery Settings, Cost Headings, Analysis Codes and Nominal Settings.
3.
Enter details in the Labour Register.
4.
Enter details in the Machine Register.
5.
Set up the Tool Register.
6.
Set up the Operations Register.
If you are using or planning to use Bill of Materials with the Manufacturing modules, you must follow the
Guidelines if you are using Bill of Materials with Manufacturing
.
7.
Enter details in the Drawing Register.
8.
Set up expense categories.
9.
Set up labour categories.
10. Set up employee details.
11. Set up non-chargeable time categories.
12. Review and amend non-working periods.
13. Set up Bill of Materials.
14. Set up Estimating.
15. Set up MPS (Master Production Schedule).
16. Set up MRP (Materials Requirements Planning).
116
8 | Set up Sage 200 Manufacturing
17. Set up Works Orders.
18. Add BOMs.
If you are using or planning to use Bill of Materials with the Manufacturing modules, you must follow the
Guidelines if you are using Bill of Materials with Manufacturing
.
117
Sage 200 On Premise
Set up and install Sage Graphical Planner
Sage 200 Manufacturing can be integrated with a Graphical Planner module from Preactor®
International. Sage Graphical Planner is based on Preactor 200 FCS v12.0 SP1. The Graphical
Planner is a Finite Capacity Scheduling tool, which works alongside MRP. It enables you to analyse and run resource plans for all demands within your Manufacturing program.
Your licence for Sage 200 Manufacturing also includes a single Local Licence for Graphical Planner.
By default, Graphical Planner is set to use Windows Integrated Security. The user logging on to
Graphical Planner must be a member of the Sage 200 Administrators Group. For more information, see
Create user accounts and groups
in the section on Installing Sage 200.
You can choose to copy the Graphical Planner installation files to a directory, as part of Sage 200 installation.
This section describes what you need to do, once you have copied the files. You must: n
Register as a Graphical Planner user.
n
Install Graphical Planner.
If you have a Network Licence, you must install Preactor's Licence Site Manager on the server.
n
Activate and access Graphical Planner.
Note:
If you are upgrading Graphical Planner, see the section Upgrading Sage Graphical
Planner.
When you have installed Graphical Planner, you can use the Preactor
Licence Utility
to activate, upgrade, return or repair the licence. This is available from
Start > All Programs > Preactor
International > Preactor 12.0 > Utilities > License Utility
.
For more information about using Sage Graphical Planner, see the Sage 200 help for an introduction to what you need to move around Graphical Planner. Search the help system for the
Graphical Planner
topics. For more extensive help on using Graphical Planner, see the Preactor help system that is supplied within the Graphical Planner application.
Important!
The Preactor copyright and licence agreement should be considered to be contained within the Sage End User Licence Agreement.
Register as an end user
Before installing Graphical Planner, your Business Partner must register your company as an end user. Preactor® International needs this information to issue you with a site licence.
The site licence is specific to the computer network you install and run Graphical Planner from
.
118
8 | Set up Sage 200 Manufacturing
Important:
Your BP must use this procedure to install Graphical Planner for Manufacturing.
If required, you can purchase additional Graphical Planner licenses. To make the activation process easier you can also obtain a Network License. A Network License allows you to enter your license details once on your network and use this to activate Graphical Planner on your client PCs. If you have a Network License, you must install the Network License Manager to activate your license.
See
Install Preactor Network License Manager on page 123
.
To begin, you must fill in the request form located on sage.co.uk.
To help you register, follow the procedure below.
To register as an end user
1. Login to the
Sage Support site
area of www.sage.co.uk.
2. Select
Downloads Home
.
3. Select
Support guides
.
4. From the drop-down list, select
Sage 200
and click
Go
.
5. Select
Graphical Planner Registration Form for Sage 50/200 Manufacturing
.
6. Click
Download
. The
File Download
prompt appears.
7. Click
Open
to view the
End User Contact Registration Form
.
8. Save the form to your hard drive.
9. Fill out the form. You must include all of the information in the mandatory fields (marked with an asterisk).
10. Attach the completed form to an email and send this to
.
Upon receipt, Preactor will send you your registration information.
Note:
The licence key and account number are emailed to the user email address which you have entered on your registration form. We recommend that you keep this information in a safe place.
Install Graphical Planner
You can install Graphical Planner from the directory containing the Graphical Planner installation files. If you selected the default paths during installation of Sage 200, this is
c:\sage\installers\graphicalplanner
.
The three files are: n
Preactor12.0.0.27664.exe
n
Sage Graphical Planner v12.prpkg
n
SageSetup.msi
119
Sage 200 On Premise
Note:
If you are upgrading Graphical Planner from v9.4 or v11.01 you must enter a new licence key. See Upgrading Sage Graphical Planner on page 1 .
To install Graphical Planner
1. Double-click Preactor12.0.0.27664.exe, and follow the steps in the wizard to install the application. Make a note of the path for the
Configurations Folder
.
For example,
C:\Users\Public\Public Documents\Preactor Configurations
.
2. Double-click
SageSetup.msi
and follow the steps in the wizard to install the extension files that are used to link Sage Manufacturing and Graphical Planner.
3. Copy
Sage Graphical Planner v12.prpkg
to the
Configurations folder
on the client computer. This is the location is specified in point 1 above.
For example,
C:\Users\Public\Public Documents\Preactor Configurations
.
4. Click
Start > Programs > Preactor International > Preactor 12.0 > Preactor 12.0
.
The
Preactor Configuration Selector
window appears.
5. Select the
Sage Graphical Planner v12.prpkg
configuration package file.
The
Preactor Configuration Package Manager
wizard opens.
6. Click
Next
.
7. Select the
Basic Options
required: l
Select
Install configuration files and local reports
.
If you have already installed from the same package in the past, you can overwrite existing files. To do this, select
Overwrite any existing files
.
l
Select the folder to install the package into. We recommend that you enter your own folder name.
For example,
C:\ Users\Public\Documents\Preactor Configurations\Sage Graphical
Planner
l
Select
Install database
.
If you have already installed from the package in the past, you can overwrite the existing database. To do this, select
Overwrite existing database
.
l
Enter a
Database Name
. For example,
Sage Graphical Planner
.
l
Click
Next
.
8. Select the
Database Options
required: l
If SQL Server is installed locally on this computer, select
Local Machine
.
o
Enter the
Instance Name
of the SQL Server connection.
Click
Advanced
to change the default Server Name.
o
Click
Next
.
120
8 | Set up Sage 200 Manufacturing l
If SQL Server is installed on a server on the network, select
Remote Database
Server
.
o
Enter the
Server Name
and
Instance Name
.
o
Enter the path to the share on the server that you have access to and that the
SQL server service account also has access to.
o
Click
Next
.
9. Review the options that you have chosen and click
Finish
.
The tasks to set up the configuration package are started. A report is produced listing any that fail. You can take steps to rectify the reasons for the failure and try again.
10. Within the Preactor Configurations folder in Windows Explorer, check that there are now two folders for importing and exporting. We recommend these are called
Import Files
and
Export Files
.
Note:
The Preactor Configurations folder is found in the path you used in step 7.
Activate the licence
Note:
If you have a Network Licence, you must have installed the
Network License Manager
.
See
Install Preactor Network License Manager on page 123
.
To activate the license
1. Open Graphical Planner
Start > Programs > Preactor International > Preactor 12.0
.
2. Choose name of the Configuration that you installed. This is the folder where you installed
Graphical Planner. For example,
C:\Users\Public\Public Documents\Preactor
Configuration\Graphical Planner\ Graphical Planner v12.prcdf
3. Choose
Activate Now
.
4. If you are using a local licence: a. Select
Local Licence
.
b. Enter your activation code and the number of seats you are licensed to use.
Note:
Sage 200 Manufacturing includes a single Local Licence.
5. If you are using a Network Licence: a. Select
Network Licence
.
b. Enter the
Server Address
.
This is the address of the server where the
Network Licence Manager
is installed.
c. Enter the
Port Number
of the server.
121
Sage 200 On Premise
Accessing Graphical Planner
Before you begin
Ensure that you have set up access paths in Sage 200 as follows:
Open: Sage 200 > Planning > Utilities > System Setup > Planning Settings |
Graphical Planner
.
l
Enter the
Path to Program
as the path used when installing Graphical Planner. For example,
C:\Program Files\Preactor International\Preactor 12.0\Preactor.exe
by default.
l
Enter the
Configuration
path. This should include the path and file name. If you have a single standalone user licence for Graphical Planner, this could be
Public
Documents\Preactor Configurations\Graphical Planner
. However, if you have a concurrent user licence (even the standard single concurrent user licence), enter a network share path for this. Then the configuration file will be accessible by multiple client computers.
Note:
These settings only apply to the computer that the instance of Graphical Planner is installed on. You should enter these settings on each machine that Graphical Planner is installed on. This is because Graphical Planner may be installed on different locations on different machines.
Tip:
If you are using a 32 bit PC and a 64 bit PC to access the same Graphical Planner data, the
Path to Program
will be different on the two PCs. You will not be able to save the planning settings until you do one of the following: n
Create the Preactor.exe file in the different directory.
n
Re-install Graphical Planner on the 32 bit PC into the program files (x86) path and create the directory there.
You can access Graphical Planner in the following ways from within Manufacturing: n
Works Orders > Graphical Planner
.
n
Planning > MRP > Processing > Graphical Planner
.
You can access Graphical Planner from outside Manufacturing:
Open: Start > Programs > Preactor International > Preactor 12.0 > Preactor 12.0
.
l
Select the correct .prcdf from the
Preactor Configuration Selector
window.
In almost all cases, this will be
Graphical Planner v12.prcdf
.
122
8 | Set up Sage 200 Manufacturing
Tip:
You can create a short cut for the Preactor 12.0 SP1 file on your desktop.
Install Preactor Network License Manager
If you want to run Graphical Planner across a network using a Network license, you must install the
Network License Manager
on the server. Using a Network licence for Graphical Planner makes it easier to add additional Graphical Planner users.
The
Network License Manager
installation file is in the directory containing the Graphical Planner installation files. If you selected the default path when installing Sage 200, this is
C:\Sage\Installers\Graphical Planner
.
The Graphical Planner path will continue to use the local workstation.
Note:
Installing the Network Licence actually installs two applications: n
The Network License Manager, which is a service that allows you to administer installed licences.
n
The Network License Utility, which installs the licence.
To install the Network License Manager
1. From your server, select the
PreactorNLM12.0.0.27664-en.exe
to install the Network
Licence Site Manager.
The
Preactor Network License Site Wizard
appears.
2. Accept the licence agreement.
3. Accept or enter a destination path for the Network License Site Manager.
4. Once the Network License Site Manager has been installed, run the Network License Utility to activate a new licence.
5. Choose to
Activate a New License
.
6. Choose from the following: a.
Activate over the Internet
Enter your
Activation Code
and the number of seats you are licensed to use.
Sage 200 has one seat for Graphical Planner. You can add more seats if required.
Contact Sage's Sales Department to update your licence.
123
Sage 200 On Premise b.
Offline Activation
i. Select
Generate an activation request file to do a manual activation
.
ii. Send this file to Preactor.
iii. When you receive your activation details, select
Apply the response file received from the activation request
.
7. Once activated, a success message appears.
124
9
Upgrading Sage 200
Use this section, if you have an existing installation of Sage 200 and you are upgrading to Sage 200 2015.
This section contains a checklist to help you when upgrading Sage 200, and additional detailed instructions for upgrading Sage 200 from the following previous versions.
n
To uninstall Sage 200 v2010 or 2009 on page 133
n
To upgrade Report Designer from v2011 and below on page 133
n
To upgrade BI from v2010 and above on page 134
n
To upgrade Manufacturing from v2010 and below on page 138
n
Upgrade from Sage 200 v5.1(all modules) on page 141
Key facts for upgrading Sage 200
1. You must upgrade all parts of Sage 200 at the same time. When you upgrade Sage 200 Financials and Commercials, you must also upgrade Manufacturing, Business Intelligence and Sage 200
CRM.
2. If you're migrating from other Sage products, such as Sage 50 Accounts, Sage Line 100, or Sage
MMS, you must use one the of Sage 200 migration tools. For more information about the migration tools, see the support area of the Sage website or contact Technical Support.
3. If you're upgrading from a version of Sage 200 prior to 2013, you must upgrade your reports first.
This is because the legacy Report Designer is no longer supported and not included with this release. Information on upgrading reports is included within the sections about upgrading from versions earlier than 2013. See
To upgrade Report Designer from v2011 and below on page 133 .
4. If you're upgrading from 2009 or 2010, you must remove the Sage 200 websites after uninstalling
Sage 200. See
Additional instructions for upgrading on page 133 .
125
Sage 200 On Premise
5. If you're upgrading from v5.1, you must upgrade to Sage 200 v2011 first to migrate your administration data. See
Upgrade from Sage 200 v5.1(all modules) on page 141
.
6. If you're upgrading to Sage 200 Online, you must follow the steps in this section to upgrade to
Sage 200 2015 On Premise first, then follow the steps in the Sage 200 Online Deployment and Installation Guide .
7. If you're upgrading Sage 200 CRM, please see
Upgrading Sage 200 CRM on page 183
.
New for 2015
1. The Wholesale and Retails module is not available in this version. If you previously used the
Wholesale we recommend that you remove the Wholesale and Retail core components after upgrading. See
2. The Menu Designer has been removed from this version and replaced with a new
Edit Menu
mode. If you currently have customised menus designed using the Menu Designer, you can import these automatically as part of the upgrade process. Once imported, these menus can be found on the Favourites view under the
Migrated User Own Menu
folder.
126
9 | Upgrading Sage 200
Upgrading checklist
This checklist is designed to assist you when installing Sage 200 On Premise.
It should be used alongside the detailed information provided in this chapter and in Chapter 4 -
Installing Sage 200 on page 45 . You must make sure you read all the relevant sections as there may
be additional requirements and settings depending on your operating system and the modules you are deploying.
To make sure Sage 200 deploys successfully you must complete all the tasks in this checklist that are relevant to your deployment.
Server and client set up and prerequisites
Do all server and client machines have supported operating systems for the required modules?
Do all server and client machines have a
c:\
drive?
Sage 200 can be installed and run from a drive other than
c:\
.
Do all client and server machines have regional and language settings set to either
English
(UK)
or
English (Ireland)
?
Do all server machines follow Microsoft naming conventions, i.e. server names cannot start with a numeric character or contain underscores? ( Microsoft KB 909264)
Do all server and client machines have the following Microsoft DotNet Framework versions installed n v3.5 Service Pack 1.
n v4.0
n v4.5.1 (new for 2015)
These are all included on Sage 200 2015 DVD.
Do all server machines have a supported version of Microsoft SQL server?
Is SQL server running in Mixed Mode (SQL Server and Windows Authentication mode)?
Is the SQL Server collation set to
Latin1_General_CI_AS?
Do all server machines have Windows Identity Foundation installed ( Microsoft KB 974405 )?
n
For Windows Server 2012, this can be added as a feature.
n
For Windows Server 2008R2, this is included on Sage 200 2015 DVD.
Do all server machines have Microsoft Internet Information Services (IIS) v7 or greater?
For IIS v7.0 and v7.5 have you applied hotfix KB980368
127
Sage 200 On Premise
IS IIS configured correctly? See
Required settings for IIS on page 13
.Do all server and client machines have Internet Explorer v10 or above installed? (new for
2015)
Have you set the firewall settings correctly? See
Security and firewall settings on page 38
.
Configure Windows users and groups
Have you created the following users and groups in Active Directory or as Workgroups?
You must contact the Administrator of the Active Directory for the site where you're installing
Sage 200 to create the following users and groups. Sage 200 will not deploy correctly if these steps are not completed.
For information about setting file share permissions, see
Security and firewall settings on page 38 .
Note:
If your domain controller is Small Business Server 2011, you must use the
SBS
Create User Wizard
to create the new users and apply the users template.
Sage 200 Administrators Group
Group Name Group
Description
Members
Sage200Admins Sage200Admins Windows users.
Users belonging to this group can access
Sage 200 System Administration, Sage 200 desktop and Sage 200 Self Service.
Note:
You cannot use the Domain Administrators group as the Sage 200
Administrator group, as this sets up the file share permissions incorrectly.
Sage 200 Users group
Group Name Group
Description
Members
Sage200Users Sage200Users Windows users.
Users belonging to this group can access Sage
200 desktop and Sage 200 Self Service.
128
9 | Upgrading Sage 200
Sage 200 Services user
User Name User
Description
Password
S200Services S200Services Enter a password for the user account and set it to
Password never expires
.
It does not require any other special permissions.
Group
Sage 200
Administrators
Sage 200 Secured Services user
User Name User
Description
S200Secured S200Secured
Password Group
Enter a password for the user account and set it to
Password never expires
.
It does not require any other special permissions.
Domain users.
Note:
This user should
not
be added to the Sage 200 Admins or Sage 200 Users groups
If you're using Workgroups,
Have you set windows file permissions? See
Security and firewall settings on page 38
Have you restarted your PC after installing Sage 200?
You need to restart your PC before access System Administration for the first time.
This makes sure that the file permissions are set correctly.
Upgrade Reports and Documents
If you upgrading from Sage 200 v2011 or below:
Have you converted your customised reports to the new file types (.report, .letter, .layout etc)
After upgrading, have you moved all customised reports to the new
Sage\Reporting\
folder and sub folders.
129
Sage 200 On Premise
Install and configure Sage 200
Have uninstalled your existing version of Sage 200?
If your current version is 2009 or 2010, have you
Uninstalled the sage 200 webistes?
Uninstalled the Sage SSL certificates?
Have you re-started the machine to make sure no files are left open?
Have you installed Sage 200 2015?
See
Installing Sage 200 on page 45
.
Have you updated your configuration database?
Have you updated your company databases?
Have you activated your license?
Have you authorised any new features for the relevant roles?
130
9 | Upgrading Sage 200
Upgrading BI checklist
Follow the instructions in this section to upgrade an existing installation of Sage 200 Business
Intelligence.
For detailed instructions, see
To upgrade BI from v2010 and above on page 134
Have you backed up all Sage 200 databases (including data warehouses and analysis services databases)?
Is the Windows user account that will access the BI Admin tool:
A domain user as long as they are an administrator in Analysis Services (see
Microsoft SQL Server security settings
)?
A member of the Sage 200 Administrators group?
Have access to the relevant Sage 200 company in System Administration?
A domain user that has 'dbcreator' level permissions in SQL Server?
Have you added the Sage folder to the list of trusted location one each client PC?
Do your BI users have access to the BI SQL database?
Have you added the Sage folder to the list of trusted location one each client PC?
Have you added the following to your firewall exceptions:
SQL Server (sqlservr.exe)?
SQL Analysis Services (msmdsrv.exe)?
If you are using named instances of SQL and Analysis Services, SQL Browser
Service (sqlbrowser.exe)?
If you're upgrading from v5.1, have you made a copy of the
settings.xml
file found in the
\\[Sage200ServerMachine]\Sage\Databases
folder?
Have you uninstalled Sage 200 and Sage 200 BI?
If you're upgrading from v5.1, have you uninstalled the following:
Sage 200 BI Server v5.1 from the Sage 200 Server?
Sage 200 BI Excel Client v5.1 from all PCs where it is installed.
Sage 200 BI Client v5.1 from all PCs where it is installed.
Have you installed Sage 200 and Sage 200 BI?
131
Sage 200 On Premise
If you're upgrading from v5.1:
Have you put the
settings.xml
file, copied earlier, back into the
\\
[Sage200ServerMachine]\Sage\Databases
folder?
Have you created custom reports or connections? If so, have you copied them from
C:\Program Files\Sage\Sage 200 IALibrary\
to the
Sage 200 BI
folder for each user's roaming profile?
Have you created a user account to run the scheduled task?
Does this user have a secure password that never expires?
We recommend that you keep a note of the password for this account until you have set up the BI Administration tool and the scheduled task is running successfully.
Does this user have the following privileges?
Is a member of the Sage 200 Administrators group.
Has access to the relevant Sage 200 company.
Is a local administrator on the Sage 200 server.
Is an administrator in Analysis Services.
Is a user in SQL Server with sysadmin access.
Is your scheduled task set to run on the Sage 200 Server machine?
If not, have you created a new scheduled task on the Sage 200 server and deleted the old one?
Have you set the correct user account to run the scheduled task?
Have you upgraded your Sage 200 databases for all companies using BI?
Have you upgraded the data warehouse?
.
132
9 | Upgrading Sage 200
Additional instructions for upgrading
Once you have uninstalled Sage 200, install Sage 200 2015 using the instructions in Chapter 4.
Use the following additional instructions for upgrading Sage 200 from previous versions.
n
To uninstall Sage 200 v2010 or 2009 on page 133
n
To upgrade Report Designer from v2011 and below on page 133
n
To upgrade BI from v2010 and above on page 134
n
To upgrade Manufacturing from v2010 and below on page 138
n
Upgrade from Sage 200 v5.1(all modules) on page 141
To uninstall Sage 200 v2010 or 2009
If your existing installation is v2010 or below, you must also delete the existing Sage 200 websites.
1. Open Windows Explorer and delete the following folders:
c:\inetpub\wwwroot\Sage 200Administration
2. Remove the Sage 200 websites from
Internet Information Services Manager
: a. Choose
Start > Run
. Enter
inetmgr
and click
OK
.
b. Right-click each of the following websites and select
Remove
.
n
Sage 200 Administration
n
Sage 200 Content
n
Sage 200 Help
n
Sage200Remote Authorisation
n
Sage200SData
n
Sage200WebServices
3. Remove the SSL certificates from within IIS Manager:
IIS v7
a. Select your
Server Name
and
Features View
.
b. In the
IIS
section, select
Server Certificates
.
c. Select
Sage 200 SSL Certificate
. Click
Remove
from the
Actions
menu.
d. Close
IIS Manager
.
To upgrade Report Designer from v2011 and below
Sage 200 v2013 included a new version of Report Designer.
All standard reports, layouts,letters and labels in the new Report Designer have a different file extension: .report, .layout, .letter or .label.
133
Sage 200 On Premise
If you have created your own reports, layouts, letters or labels in Report Designer, prior to Sage 200 v2010, these will have a .srt, .sly, .slt or .slb file extension. These files cannot be opened using the new Report Designer.
You must convert these files to the new file types before upgrading.
To do this, convert your reports and documents using the
File > Import
option in the new Report
Designer or use the Legacy Report conversion tool. This is included as part of the BP tools and can be downloaded from the support area of the Sage website .
Upgrading reports and documents
From Sage 200 2013 reports and documents are also stored in a new location on your server;
Sage\Reporting
. Within this folder, reports and documents are also stored in three location levels: n
Sage\reporting\default
for the default reports and documents supplied with Sage 200.
n
Sage\reporting\custom
for reports and documents you have customised.
n
Sage\reporting\company\<company name>
for reports and documents that you have customised for a specific company.
n
Note:
For company reports and documents you must create the required folders first.
When a report is run from Sage 200, the company specific reports and documents are checked first, then the custom reports and documents and finally the default reports and documents. The first report located is then used.
Once you have edited or created a report or document, you must save it to a custom or company folder using the same folder structure and the same name as the default report or document.
When you upgrade from a previous version of Sage 200, all the default Sage 200 reports, documents, letters etc are added to the
Sage\reporting\default
folder and sub folders.
If you have reports and documents that you have previously customised, you must move these reports and documents to the required folder using the new folder structure.
For more information see the Sage 200 Help .
To upgrade BI from v2010 and above
Use the instructions here to upgrade BI for v2009 and above. To upgrade BI from v5.1, see
Upgrade from Sage 200 v5.1(all modules) on page 141
.
To upgrade BI
1. Make sure the Windows user accounts for users that will access the BI Administration tool are:
134
9 | Upgrading Sage 200 n
A domain user as long as they are an administrator in Analysis Services (see
Microsoft SQL Server security settings ),
n
A member of the Sage 200 Administrators group.
n
Have access to the relevant Sage 200 company in System Administration.
n
A domain user that has 'dbcreator' level permissions in SQL Server.
2. Create a windows user account for the scheduled task that updates the BI cubes.
You must specify a windows user account that will run the scheduled task for BI to update the cubes. In previous versions you could use the Local System account, this is not possible for 2015.
We recommend that you create a windows user account specifically for this task. The user specified to run the Windows Scheduled Task must: l
Have a secure password that never expires.
We recommend that you keep a note of the password for this account until you have set up the BI Administration tool and the scheduled task is running successfully.
l
Have the following privileges: o
Be a member of the Sage 200 Administrators group.
o
Have access to the relevant Sage 200 company.
o
Be a local administrator on the Sage 200 server.
o
Be an administrator in Analysis Services.
o
Be a user in SQL Server with sysadmin access.
Note:
If this user does not appear in the user list in the BI Admin tool, we recommend that you create a new user in Active Directory. This is due to the Windows user not having a
User Principle Name
. A User Principle Name is a part of the Active Directory user information. This information is sometimes missing on older user accounts, especially if they have been migrated from an older version of Active Directory and the domain administrator account.
3. Back up all Sage 200 databases (including data warehouses and analysis services databases).
4. Uninstall Sage 200.
5. Choose to install the Sage 200 BI components when you install Sage 200 2015.
For information about installing Sage 200, see
Install Sage 200 on your server on page 50
.
6. Make sure the scheduled task is on the Sage 200 Server machine. Each company that uses
BI must have a separate scheduled task.
In previous versions, the scheduled task could be installed on a separate machine with SQL
Server. See
Configure the scheduled task on page 96 .
135
Sage 200 On Premise
7. Change the user account used to run the scheduled task to the windows user account that you have created: a. Open the Sage 200 Business Intelligence Administration Tool.
b.
Schedule tasks
. The
Task Scheduler
appears.
b. From the left-hand pane, select
Task Scheduler Library
.
c. Right-click the
UpdateCube
task for the required company and select
Properties
.
d. Select the Windows user account that you have created for the scheduled task.
e. Make any other required changes to the task and click
OK
.
8. Upgrade your Sage 200 databases for all companies that also use BI, using the Sage 200
System Administration tool.
Note:
You
must
upgrade your Sage 200 databases to 2015 before you upgrade your BI data warehouse.
9. Upgrade the data warehouse: a. Open the Sage 200 Business Intelligence Administration Tool.
b. Select
Upgrade warehouse
for each Sage 200 company that uses BI.
136
9 | Upgrading Sage 200
Project Accounting Reports
You can set up Sage 200 Project Accounting to use terminology that is familiar to your business, such as
Job
rather than
Project
.
Business Intelligence automatically uses these configurable terms when you create or update the
Project Accounting cubes. This is to make sure that your reports match the terms that have been set up in Sage 200.
However, the standard project reports in BI have been created using the default terminology from
Sage 200. Before using the standard project reports in BI, you must amend them to match the terminology you have set up in Sage 200.
To change the configurable terms
For each project report:
1. Open the report.
2. Select each item that has used a configurable term.
3. Re-select the item using the new term.
For example, if you have used
Job
as the label for your
Projects
, you must re-select
Job
for each incidence where
Project
is currently specified on the report.
Aged Debt and Aged Credit Cubes v2010 and prior
In v2010 and before, the
Aged Debt
and
Aged Credit
cubes only contained information about invoices.
In the newer versions of BI, these cubes have been updated to include all transactions. In previous versions of Sage 200, when you added the
Value
on your aged debt and aged credit BI reports, you could only choose to use the
Outstanding Value
or
Invoice Value
.
In current versions, the
Invoice Value
has been changed to
Transaction Value
. This is because this now includes the value of credit notes, receipts and payments as well as invoices.
If you have existing BI reports that use the
Invoice Value
, you must amend these reports after you have upgraded to Sage 200 2015.
1. Open the BI report.
2. If
Invoice Value
is used as criteria on the report, re-select
Transaction Value
.
3. If
Invoice Value
has been used on the rows or columns, open the
Report Layout
.
4. Select
Value
on the
Columns
or
Rows
, where applicable.
5. Select
Transaction Value
.
6. Click
Apply
.
137
Sage 200 On Premise
To upgrade Manufacturing from v2010 and below
Important: If you are using Bill of Materials with Manufacturing
Manufacturing is being extensively redeveloped and this process is not yet complete.
Consequently, some of the information that you can enter and use in the Bill of Materials module now, cannot be used yet in the Estimating, Planning and Works Orders modules.
If you are using, or plan to use all Manufacturing modules, you must follow these guidelines for operations that you add to the BOM record.
Note:
If the BOM record has been created by converting a one-off works order into a BOM, an operation resource is added to the BOM record automatically. Do not rename this operation. If you do, you will not be able to update information between the BOM and the Works Order.
n
On the operation record
Details
tab, do not use the
Overlap Quantity
or enter seconds values for the resource.
n
On the operation record
Resources
tab, do not enter seconds values for the resource.
Ensure that you add only the following resources with the following settings:
Phase
Setup
How many
Resource
Types?
Resource Type
Two
Primary/Secondary Fixed
Length
Select no more than two resources for this phase. You can select a labour setup resource (
Labour Resource
or
Labour Resource Group
) and a machine setup resource
(
Machine Resource
or
Machine
Resource Group
), but you cannot select two labour or two machine setup resources.
Select
Primary
or
Secondary
for one or the other resource.
You must select
Fixed
Length
for the resource.
Note:
Adding a
Labour
Resource
or
Labour
Resource Group
updates the
Include in Labour
Requirements
check box on the works order operation when a works
138
9 | Upgrading Sage 200
Phase How many
Resource
Types?
Resource Type
order is created from the
BOM record.
Runtime
Three
Primary/Secondary Fixed
Length
Select one
Labour Resource
or
Labour Resource Group
.
Select one
Machine Resource
or
Machine Resource Group
.
Select one
Tool Resource
or
Tool Resource Group
.
Note:
Only select a tool resource or resource group if you have also selected a labour and a machine resource or resource group.
Select
Primary
for your labour or machine
Resource
Type
and
Secondary
for the other.
Note:
Do
not
select either
Primary
or
Secondary
for your tool
Resource
Type
selection.
Do not select
Fixed
Length
for the resource or resource group.
Teardown
None n
On the operation record
Subcontract
tab, add only one supplier and no more than five quantity breaks. The supplier must use base currency.
Note:
The following characters are supported in the Bill of Materials module, but not in other
Manufacturing modules:
Apostophe (
'
)
Quotation (
"
)
In your current installation of Sage 200 Manufacturing you must: n
Make sure that you have no BOMs checked out.
n
Make sure that a
Group
is assigned to your
Labour
and
Machine
resources. This will ensure that you can move your resources within the correct group when using Graphical Planner to manage your production plan. If you upgrade without assigning resources to a Group, the resources will be assigned to a group called
Missing
. Graphical Planner will allow you to move operations that use any resource in group
Missing
to any other resource in the same group.
139
Sage 200 On Premise
Upgrading Sage Graphical Planner
Sage 200 2015 uses Graphical Planner version 12.0 SP1.
A new licensing mechanism was introduced for Graphical Planner v11.2 SP2 and this version of
Graphical Planner was first released with Sage 200 v2011 SP3. If you are using an earlier version than v11.2 SP2 of Graphical Planner, then you must follow the instructions below to update your
Graphical Planner licence.
You must enter a new 30 day licence key for your existing version of Graphical Planner, before you upgrade to version 12.0 SP1.
1. Request a licence for version 12.0 SP1 of Graphical Planner. To do this, please complete the licence request form located on Sage.co.uk.
See
Register as an end user on page 118
.
2. Open your existing License Manager and request a licence update. This generates an email request which you must send to Preactor. Preactor will send you a response file.
3. When you receive the response file, apply it to your existing installation of Graphical Planner.
This applies a 30 day licence.
Note:
You must upgrade your Graphical Planner to v12.0 SP1 within this 30 day licence period.
4. Uninstall your existing version of Graphical Planner.
5. Install Graphical Planner version 12.0 SP1 and activate your new v12.0 SP1 licence as per the installation and activation instructions. See
Install Graphical Planner on page 119
.
140
9 | Upgrading Sage 200
Upgrade from Sage 200 v5.1(all modules)
Follow the instructions in this section to upgrade Sage 200 v5.1 to Sage 200 2015.
Key facts about upgrading from v5.1
1. Your configuration database cannot be upgraded directly to 2015.
Before you install Sage 200 2015, you must upgrade your configuration database using Sage
200 v2011. This is so your existing Sage 200 users can be matched to your windows user accounts in 2015.
2. For 2015, you use your windows user accounts to access Sage 200 and Sage 200 System
Administration. When upgrading from previous version of Sage 200 you must match your existing Sage 200 user accounts in your configuration database with your windows user accounts.
3. If you are using Sage 200 Bill of Materials, you must use the Sage 200 Data Migration tool to upgrade BOM to Sage 200 v2011 first.
Steps to upgrade
1. Uninstall your current version of Sage 200.
2. Install Sage 200 v2011 and migrate your existing configuration data to a new configuration database.
3. Uninstall Sage 200 v2011.
4. Create the required Windows user accounts and groups.
5. Install Sage 200 2015.
6. Update your new configuration database.
7. Match your windows user accounts to your existing Sage 200 user accounts.
8. Activate your license.
9. Update your users, roles and features.
Migrate administration data
A new System Administration tool was introduced in Sage 200 v2009. To upgrade your administration data to Sage 200 2015, you must migrate administration data to create a new configuration database.
To do this you must upgrade to Sage 200 v2011 first and use the migration utility provided to migrate your administration data.
You can choose to migrate some or all of your existing administration data from the old System
Administrator program to the new Sage 200 System Administration tool. You must choose to migrate your users.
141
Sage 200 On Premise
Once you have migrated your administration data, you can uninstall Sage 200 v2011.
To install Sage 200 v2011 and create your configuration database
1. Install Sage 200 v2011.
2. Open
Start > Programs >Sage Tools > Sage 200 > System Administration
.
The following message appears:
3. Click
Yes
.
The Server properties
window appears.
4. Enter or browse for the correct SQL server settings.
5. Enter a name for the configuration databse
6. Click
Create
to create new configuration database:
7. If required, enter the
Logon Name
and
Password
for a SQL user that has access rights to create a database.
8. Click
OK
.
Migrate existing administration data
You can migrate the following: n
Company set up information
This migrates your company name, parent company, attachments directory, spool directory server and database name for each Sage 200 company.
n
Groups
This migrates your groups. These become
Roles
in the new System Administration tool.
n
Users
This migrates the names, passwords and details of the users you choose to migrate. If you choose to migrate user group membership, these users are assigned to
Roles
in the new
System Administration tool.
n
Customisations
You can migrate customisations for individual groups or all groups.
142
9 | Upgrading Sage 200 n
Menus
You can choose which menus to migrate. These menus are assigned
Features
in the new
System Administration tool. You decide which
Roles
can use these menus. You use the
Menu Design Mode
in Sage 200 to change the menus and create new ones.
To migrate administration data
1. Once you have created your configuration database, the following message appears:
2. To migrate your existing System Administrator data, click
Yes
. The
System Administration
Migration Utility
wizard appears.
3. Follow the steps in the
System Administration Migration Utility
wizard.
Note:
On the
Site Configuration
screen, enter the
SAA Web Service Address
in the following format:
https://<
Name of Sage 200 Application Server machine>:10443/
Sage200Administration/Sage200AdminService.asmx
4. Once you have migrated your data, check that has migrated correctly in System
Administration.
5. Uninstall Sage 200 v2011.
Create Windows user accounts and groups
Users access the Sage 200 desktop and Sage 200 System Administration using their Windows
User account log on details.Windows User accounts are also used to access Sage 200 services.
Before installing Sage 200, you must create the required Windows user groups and accounts. You must create the following: n
A Sage 200 Administrators Group.
n
A Sage 200 Users Group.
n
A Sage 200 Services user.
n
A Sage 200 Secured Services user (which must be a different user to the Sage 200 Services user).
143
Sage 200 On Premise
Set up the required groups and users
Set up your groups and users in Active Directory using the following information. If you are using
Workgroups, set them up as local groups and users using the details below.
1. Create a Sage 200 Administrators Group a. Create a group in Active Directory using the following information:
Active Directory Group Name Active Directory Group Description
Sage200Admins Sage 200 Admins b. Add the required Windows users to this group. Users belonging to this group can access Sage 200 System Administration, Sage 200 desktop and Sage 200 Self
Service.
Note:
You cannot use the Domain Administrators group as the Sage 200 Administrator group, as this sets up the file share permissions incorrectly.
2. Create a Sage 200 Users Group: a. Create a group in Active Directory using the following information:
Active Directory Group Name Active Directory Group Description
Sage200Users Sage 200 users b. Add the required Windows users to this group. Users belonging to this group can access Sage 200 desktop and Sage 200 Self Service.
3. Create a Sage 200 Services user: a. Create a user in Active Directory using the following information:
Active Directory User Name Active Directory User Description
S200Services Sage 200 Service Account b. Enter a password for the user account and set it to
Password never expires
. It does not require any other special permissions.
c. Add this user to the Sage 200 Administrators group.
When you install the Sage 200 Server, you must specify the name and password for this account.
If you are integrating with Sage 200 CRM, this Windows user account must also be specified on the integration. See
Create a new Sage 200 CRM integration on page 166
.
4. Create a Sage 200 Secured Services user:
144
9 | Upgrading Sage 200 a. Create a user in Active Directory using the following information:
Active Directory User Name Active Directory User Description
S200SecuredServices Sage 200 Secured Service Account b. Enter a password for the user account and set it to
Password never expires
. It does not require any other special permissions.
c. This account should be a member of your domain users group but should not be added to the Sage 200 Users or Sage 200 Administrators group.
When you install the Sage 200 Server, you must specify the name and password for this account.
Notes
1. Changing passwords
If the password is changed for either of the Sage 200 Service accounts, you must update the passwords in these application pools:
Application Pool User
Sage 200 Secured Services S200SecuredServices
Sage 200 Self Service
Sage 200 Services
S200Services
S200Services
If you do not do this, you will see the following error message when accessing Sage 200.
2. You can add the required windows user accounts to the user groups after Sage 200 has been installed. Access to specific Sage 200 modules and features is controlled in Sage 200
System Administration.
3. For more information on where to set up users using Windows Active Directory, or using
Windows user groups, refer to your operating system help, as the process may involve different steps in different operating systems.
Install Sage 200 2015
See
Installing Sage 200 on page 45
.
145
Sage 200 On Premise
To upgrade Manufacturing from v5.1
If you are using Sage 200 Bill of Materials, you must use the Sage 200 Data Migration tool to upgrade to Sage 200 v2013.
Important: If you are using Bill of Materials with Manufacturing
Manufacturing is being extensively redeveloped and this process is not yet complete.
Consequently, some of the information that you can enter and use in the Bill of Materials module now, cannot be used yet in the Estimating, Planning and Works Orders modules.
If you are using, or plan to use all Manufacturing modules, you must follow these guidelines for operations that you add to the BOM record.
Note:
If the BOM record has been created by converting a one-off works order into a BOM, an operation resource is added to the BOM record automatically. Do not rename this operation. If you do, you will not be able to update information between the BOM and the Works Order.
n
On the operation record
Details
tab, do not use the
Overlap Quantity
or enter seconds values for the resource.
n
On the operation record
Resources
tab, do not enter seconds values for the resource.
Ensure that you add only the following resources with the following settings:
Phase
Setup
How many
Resource
Types?
Resource Type
Two
Primary/Secondary Fixed
Length
Select no more than two resources for this phase. You can select a labour setup resource (
Labour Resource
or
Labour Resource Group
) and a machine setup resource
(
Machine Resource
or
Machine
Resource Group
), but you cannot select two labour or two machine setup resources.
Select
Primary
or
Secondary
for one or the other resource.
You must select
Fixed
Length
for the resource.
Note:
Adding a
Labour
Resource
or
Labour
Resource Group
updates the
Include in Labour
146
9 | Upgrading Sage 200
Phase How many
Resource
Types?
Resource Type
Requirements
check box on the works order operation when a works order is created from the
BOM record.
Primary/Secondary Fixed
Length
Runtime
Three Select one
Labour Resource
or
Labour Resource Group
.
Select one
Machine Resource
or
Machine Resource Group
.
Select one
Tool Resource
or
Tool Resource Group
.
Note:
Only select a tool resource or resource group if you have also selected a labour and a machine resource or resource group.
Select
Primary
for your labour or machine
Resource
Type
and
Secondary
for the other.
Note:
Do
not
select either
Primary
or
Secondary
for your tool
Resource
Type
selection.
Do not select
Fixed
Length
for the resource or resource group.
Teardown
None n
On the operation record
Subcontract
tab, add only one supplier and no more than five quantity breaks. The supplier must use base currency.
Note:
The following characters are supported in the Bill of Materials module, but not in other
Manufacturing modules:
Apostophe (
'
)
Quotation (
"
)
In your current installation of Sage 200 Manufacturing you must:
147
Sage 200 On Premise n
Make sure that you have no BOMs checked out.
n
Make sure that a
Group
is assigned to your
Labour
and
Machine
resources. This will ensure that you can move your resources within the correct group when using Graphical Planner to manage your production plan. If you upgrade without assigning resources to a Group, the resources will be assigned to a group called
Missing
. Graphical Planner will allow you to move operations that use any resource in group
Missing
to any other resource in the same group.
Upgrade Graphical Planner
Sage 200 2015 uses Graphical Planner version 12.0 SP1.
You must enter a new 30 day licence key for your existing version of Graphical Planner, before you upgrade to version 12.0 SP1.
1. Request a licence for version 12.0 SP1 of Graphical Planner. To do this, please complete the licence request form located on Sage.co.uk.
See
Register as an end user on page 118
.
2. Open your existing License Manager and request a licence update. This generates an email request which you must send to Preactor. Preactor will send you a response file.
3. When you receive the response file, apply it to your existing installation of Graphical Planner.
This applies a 30 day licence.
Note:
You must upgrade your Graphical Planner to v12.0 SP1 within this 30 day licence period.
4. Uninstall your existing version of Graphical Planner.
5. Install Graphical Planner version 12.0 SP1 and activate your new v12.0 SP1 licence as per the installation and activation instructions. See
Install Graphical Planner on page 119
.
Important!
There were substantial differences between Sage Graphical Planner v9.4 and v11.01.
For this reason, if you are upgrading from v9.4, you must re-create all of your calendar information in
Graphical Planner v12.0 SP1 once it is installed. Refer to
Preactor's help
system for guidance on the differences between the versions.
Note:
Any changes you have made to the workspace within Graphical Planner (for example, the arrangement of toolbars, the colours assigned to product categories, shift patterns or calendar exceptions) are not included in the upgrade. You will need to recreate these changes in the upgraded version of Graphical Planner.
To upgrade BI from v5.1
Follow the instructions in this section to upgrade Business Intelligence from 5.1.
148
9 | Upgrading Sage 200
To upgrade BI
1. Make sure the Windows user accounts for users that will access the BI Administration tool are: n
A domain user as long as they are an administrator in Analysis Services (see
Microsoft SQL Server security settings ),
n
A member of the Sage 200 Administrators group.
n
Have access to the relevant Sage 200 company in System Administration.
n
A domain user that has 'dbcreator' level permissions in SQL Server.
2. Create a windows user account for the scheduled task that updates the BI cubes.
You must specify a windows user account that will run the scheduled task for BI to update the cubes. In previous versions you could use the Local System account, this is not possible for 2015.
We recommend that you create a windows user account specifically for this task. The user specified to run the Windows Scheduled Task must: l
Have a secure password that never expires.
We recommend that you keep a note of the password for this account until you have set up the BI Administration tool and the scheduled task is running successfully.
l
Have the following privileges: o
Be a member of the Sage 200 Administrators group.
o
Have access to the relevant Sage 200 company.
o
Be a local administrator on the Sage 200 server.
o
Be an administrator in Analysis Services.
o
Be a user in SQL Server with sysadmin access.
Note:
If this user does not appear in the user list in the BI Admin tool, we recommend that you create a new user in Active Directory. This is due to the Windows user not having a
User Principle Name
. A User Principle Name is a part of the Active Directory user information. This information is sometimes missing on older user accounts, especially if they have been migrated from an older version of Active Directory and the domain administrator account.
3. Back up all Sage 200 databases (including data warehouses and analysis services databases).
4. Make a copy of the
settings.xml
file found in the following folder:
\\[Sage200ServerMachine]\Sage\Databases
.
5. Uninstall Sage 200.
149
Sage 200 On Premise
6. Uninstall the following BI components l
Sage 200 BI Server v5.1 from the Sage 200 Server.
l
Sage 200 BI Excel Client v5.1 from all PCs where it is installed.
l
Sage 200 BI Client v5.1 from all PCs where it is installed.
7. Choose to install the Sage 200 BI components when you install Sage 200 2015.
For information about installing Sage 200, see
Install Sage 200 on your server on page 50
.
8. Put the
settings.xml
file, copied earlier, back into the following folder:
\\[Sage200ServerMachine]\Sage\Databases
.
9. If you have created custom reports or connections, you must make sure that they are copied from
C:\Program Files\Sage\Sage 200 IALibrary\
to the
Sage 200 BI
folder for each user's roaming profile.
10. Make sure the scheduled task is on the Sage 200 Server machine. Each company that uses
BI must have a separate scheduled task.
In previous versions, the scheduled task could be installed on a separate machine with SQL
Server. See
Configure the scheduled task on page 96 .
150
9 | Upgrading Sage 200
11. Change the user account used to run the scheduled task to the windows user account that you have created: a. Open the Sage 200 Business Intelligence Administration Tool.
b.
Schedule tasks
. The
Task Scheduler
appears.
b. From the left-hand pane, select
Task Scheduler Library
.
c. Right-click the
UpdateCube
task for the required company and select
Properties
.
d. Select the Windows user account that you have created for the scheduled task.
e. Make any other required changes to the task and click
OK
.
12. Upgrade your Sage 200 databases for all companies that also use BI, using the Sage 200
System Administration tool.
Note:
You
must
upgrade your Sage 200 databases to 2015 before you upgrade your BI data warehouse.
13. Upgrade the data warehouse: a. Open the Sage 200 Business Intelligence Administration Tool.
b. Select
Upgrade warehouse
for each Sage 200 company that uses BI.
151
Sage 200 On Premise
Aged Debt and Aged Credit Cubes v2010 and prior
In v2010 and before, the
Aged Debt
and
Aged Credit
cubes only contained information about invoices.
In the newer versions of BI, these cubes have been updated to include all transactions. In previous versions of Sage 200, when you added the
Value
on your aged debt and aged credit BI reports, you could only choose to use the
Outstanding Value
or
Invoice Value
.
In current versions, the
Invoice Value
has been changed to
Transaction Value
. This is because this now includes the value of credit notes, receipts and payments as well as invoices.
If you have existing BI reports that use the
Invoice Value
, you must amend these reports after you have upgraded to Sage 200 2015.
1. Open the BI report.
2. If
Invoice Value
is used as criteria on the report, re-select
Transaction Value
.
3. If
Invoice Value
has been used on the rows or columns, open the
Report Layout
.
4. Select
Value
on the
Columns
or
Rows
, where applicable.
5. Select
Transaction Value
.
6. Click
Apply
.
Project Accounting Reports
You can set up Sage 200 Project Accounting to use terminology that is familiar to your business, such as
Job
rather than
Project
.
Business Intelligence automatically uses these configurable terms when you create or update the
Project Accounting cubes. This is to make sure that your reports match the terms that have been set up in Sage 200.
However, the standard project reports in BI have been created using the default terminology from
Sage 200. Before using the standard project reports in BI, you must amend them to match the terminology you have set up in Sage 200.
To change the configurable terms
For each project report:
1. Open the report.
2. Select each item that has used a configurable term.
3. Re-select the item using the new term.
For example, if you have used
Job
as the label for your
Projects
, you must re-select
Job
for each incidence where
Project
is currently specified on the report.
152
10
Install and set up Sage 200 CRM
Use the instructions in this chapter for a
new
installation of Sage 200 CRM.
If you have an existing installation of Sage 200 CRM, you must follow the instructions for
.
Key facts about installing Sage 200 CRM
1. If you are integrating Sage 200 CRM with an installation of Sage 200 Accounts that only includes the Financials modules, some CRM functionality is not available. For more information see the
Sage 200 CRM Implementation Guide.
2. Sage 200 CRM is not supported when it is installed more than once on the same server.
3. You must install the version of Sage 200 CRM that is compatible with your installed version of
Sage 200.
4. You may need to install additional patches and hotfixes.
5. Make sure you have created and know the details of the separate Sage 200 Services Windows user account set up for Sage 200 Accounts. This user account is also used by Sage 200 CRM
Integration service.
6. You must set up the integration and synchronise Sage 200 and Sage 200 CRM, even if you are not planning to use Sage 200 CRM as an integrated system. This is because customisations are applied to Sage 200 CRM as part of the synchronisation.
Steps to install Sage 200 CRM
1. Check your SQL server settings.
2. Check IIS is installed as a server role.
3. Install Sage 200 Accounts
4. Install Sage 200 CRM.
153
Sage 200 On Premise
5. Adjust the configuration of IIS
6. Set up user permissions for CRM folders.
7. Create a windows user account for the CRM integration
8. Set up users for the Sage 200 CRM in the Sage 200 System Administration tool.
9. Set up Sage 200 CRM in the Sage 200 desktop.
10. Set up the integration between Sage 200 CRM and Sage 200.
11. Set up Sage 200 CRM.
This chapter also contains a troubleshooting section which covers some issues you may need to be aware of when installing and integrating Sage 200 CRM.
Prerequisites
To install Sage 200 CRM and integrate with Sage 200 you must have the following installed:
Microsoft SQL Server 2008 R2, 2012 or 2014.
Microsoft Internet Information Services (IIS) version 7.0 or above, with the required settings.
See
Required settings for IIS on page 13 .
A valid licence key.
The licence key takes into account your company name. Care must be taken during the installation to enter this information correctly.
Note:
If you want to use web orders and quotes in Sage 200 CRM, you must a have a licence for Sage 200 Financials and Commercials.
Please see the
System requirements and prerequisites on page 3
for information about the minimum specifications required for your system.
154
10 | Install and set up Sage 200 CRM
Check your SQL Server settings for Sage 200
CRM
Before you can install Sage 200 CRM, you must make sure that
TCP/IP
and
Named Pipes
are enabled.
To change SQL Server settings
1. Select
Start > Programs > SQL Server > Configuration Tools > SQL Server
Configuration Manager
.
2. Select
SQL Server Network Configuration > Protocols for SQL 2008 R2 /2012
.
3. Make sure
TCP/IP
and
Named Pipes
are enabled.
155
Sage 200 On Premise
Check IIS is installed as a server role
1. Select
Start > All Programs > Administrative Tools > Server Manager > Roles
.
2. Select
Add Roles
. The
Add Roles Wizard
appears. Click
Next
.
3. Select
Web Server (IIS)
.
4. In the Role Services section of the Add Roles Wizard, make sure that the following role services are selected: l
Application Development > ISAPI Extensions
l
Application Development > ASP (set Enable Parent Paths to True)
l
Security > Windows Authentication (if Auto Logon is required)
l
Management Tools > IIS Management Console and IIS Management
Compatibility
Note:
You must make sure that in IIS the
Anonymous Authentication
Credentials
are using
Application Pool Identity
or are hard-coded with a local administrator account. If this is not the case, you may experience issues when editing CRM System Settings.
5. Continue with a standard installation of Sage 200 CRM. See
156
10 | Install and set up Sage 200 CRM
Install Sage 200 CRM
For a
new
installation and integration of Sage 200 CRM you must:
1. Install Sage 200 CRM 7.3
2. Install Sage 200 2015.
3. Configure the CRM web site to use the Application Pool Identity in IIS.
Install Sage 200 CRM 7.3
1. Open the
Sage 200 CRM > Sage 200 CRM
folder from the Sage 200 DVD. Run the
setup.exe
file.
2. Accept the Software License Agreement.
3. Enter your
Name
,
Company
name and
License
key.
The company name and license key must be entered in exactly the same way as provided to you by Sage.
4. Choose
Existing Microsoft SQL Server
.
5. Enter the
Installation name
. We recommend that you use the default installation name,
CRM
.
If you enter an alternative name, please make sure there are no spaces in the name.
MAke a note of the installation name as you'll need it later when you set up the synchronisation.
157
Sage 200 On Premise
6. Enter the location for the CRM program files. The default location is
C:\Program
Files\Sage\CRM
.
IIS looks in this location for the CRM home page.
7. Check that the correct SQLserver instance is entered correctly in the
Database Server
field.
8. Enter the TC/IP
Port Number
.
If your SQL instance is the default instance, the port number will be entered by default. This is usually
1433
.
If you are using a named SQL instance, you must enter the correct port number. To find the
TC/IP port number, see the following Microsoft Knowledgebase article: http://support.microsoft.com/kb/265808 .
9. Check your SQL Server user
Login ID
is correct.
Enter the
Password
for this SQL server user ID.
10. Select
No demo data
.
11. If you want to use Self Service in CRM, select
Sample Self Service support site
.
12. Select a
Default currency
from the list. If your default currency is not displayed on the list, click
New
.
l
Enter the
Currency name
.
l
Enter the internationally recognized
Currency symbol code
. Click
OK
. The new currency is displayed in the list.
The default currency is displayed in a read-only format against all currency type fields in Sage
200 CRM. If your implementation deals with multiple currencies, this forms the Base
Currency against which all other currencies are calculated.
13. The
CTI settings
screen may appear. Click
Next
to continue.
158
10 | Install and set up Sage 200 CRM
14. Enter your
HTTP Protocol
details if required.
If you are using HTTPS or you use a Proxy Server for Internet access, select one of the following: l
Use Https
l
Use proxy
Once selected, enter your Proxy Address, Port number and authentication details, if required.
15. Check your installation settings and click
Next
to start the installation. .
16. When the installation is complete, select
Finish
to complete the installation process.
Note:
Please be aware that on occasions you may see a blank screen while the installation is running.
159
Sage 200 On Premise
Configure IIS for Sage 200 CRM
Before you set up the integration in Sage 200 CRM, you must
1. Set the CRM application pool to allow 32-bit applications.
2. Configure the CRM web site to use the
Application pool identity
, and change the application pool user.
This is to make sure that the
Real Time Data Views
and the
Pricing Service
can access
Sage 200 Accounts and that you can access the
Progress
tab on the integration in CRM
3. Change the user for the CRM library folder.
4. Add permissions for the S200Services user to the CRM WWWRoot folder.
To set the application pool to allow 32-bit applications
When you install Sage 200 CRM, the application will create virtual directories within the Default website. These must be set to allow 32-bit applications.
1. Open
IIS Manager
and select
Application Pools
.
2. Select
CRM App Pool
and click
Advanced Settings
.
3. Set
Enable 32-bit applications
to
True
.
4. Click
OK
and close
IIS Manager
.
To change the application pool identity
1. Open
Internet Information Services (IIS) Manager
.
2. On the
Connections
pane, select
Sites > Default Web Site
.
3. Select the web site for your installation of CRM.
This is the
Installation name
that you entered in step 5 of the Sage 200 CRM installation process.
4. From the
Features View
, double click
Authentication
. This opens the Authentication settings.
5. Right-click
Anonymous Authentication
and select
Edit
.
6. Select
Application pool identity
and click
OK
.
To change the CRM application pool user
1. Open
IIS Manager > Application Pools
.
2. Right -click
CRM App Pool
and choose
Advanced Settings
.
160
10 | Install and set up Sage 200 CRM
3. In the
Process > Identity
section, change the user from
Local System
to the same user as the Sage 200 Web Services Application Pool.
To change the user on the CRM library folder
1. Browse to the Library folder. For a default installation of CRM, this is C:\Program
Files\Sage\CRM\<CRM install name>\.
2. Right-click the
Library
folder and choose
Properties > Security
.
3. Add the same user as the one you have just added to CRM Application Pool.
4. Allow the new user
Full Control
and click
OK
.
Note:
If you don't change the user on the
Library
folder, you will see the following error when creating a company in CRM:
Error - Folder could not be created : "C:\Program
Files\Sage\CRM\<CRM install name>\Library\<CRM Company name>"
.
This is to make sure that the
Real Time Data Views
and the
Pricing Service
can access Sage 200
Accounts and that you can access the
Progress
tab on the integration in CRM
To add the S200Services user to the CRM wwwroot folder
1. Browse to the WWWRoot folder. For a default installation of CRM, this is C:\Program
Files\Sage\CRM\<CRM install name>\.
2. Right-click the
WWWRoot
folder and choose
Properties > Security
.
3. Add the S200Services user.
4. Allow the new user
Full Control
and click
OK
.
5. Reset IIS.
161
Sage 200 On Premise
Set up Sage 200 Accounts and Sage 200 CRM
Important
This section should only be used if you are setting up an integration between Sage 200 Accounts and Sage 200 CRM for the
first
time.
If you are upgrading from a previously integrated system, see
Upgrading Sage 200 CRM on page
Before you can start using Sage 200 CRM with Sage 200 Accounts you must complete the following tasks in the Sage 200 System Administration tool, the Sage 200 desktop and Sage 200 CRM:
Sage 200 System Administration n
Make sure that the user account that you are using to access the Sage 200 Services has access to the Sage 200 company that you are integrating with.
n
If you want to launch Sage 200 Accounts forms from CRM, make sure you set up your
CRM users in Sage 200 Accounts.
Sage 200 Desktop: n
Enter your CRM integration settings.
n
Set up a customer account for your CRM prospects.
n
If required, choose to use segmented addresses.
n
If required, choose to automatically generate sales order and return numbers.
Sage 200 CRM: n
Create and enable a new integration.
n
Start the CRM Integration Service.
n
Synchronise the data.
Set up user accounts
Set up a Windows user account for the CRM integration
The Sage 200 CRM Integration Service accesses the Sage 200 Services using the same Windows user account that you have set up to access the Sage 200 Services. This is the Windows user account that is specified as part of the installation of Sage 200.
This Windows user account must: n
Have a password that never expires n
Be a member of the Sage 200 Users Group. This is specified as part of the Sage 200 installation process. See
Install Sage 200 on your server on page 50
.
162
10 | Install and set up Sage 200 CRM n
Be linked to a Sage 200 user account, that has access to the Sage 200 database you want to integrate with.
Set up user accounts for your CRM users in Sage 200 System
Administration
We recommend that you set up a role in Sage 200 System Administration specifically for your
CRM users who will launch Accounts forms from CRM. These users must have access to the Sage
200 company database and the Sage 200 Accounts forms.
If these users do not need to access the Sage 200 desktop, create a
Remote Users Access only
role. This allows CRM users to launch Accounts forms without using an Accounts license.
To set up your users:
1. Make sure that the Windows user accounts for your CRM users are members of the Sage
200 Users group.
2. In System Administration, make sure these users have access the Sage 200 company you want to integrate with.
a. Open System Administration
> Companies > Properties
.
b. Assign your CRM users on the
Users
tab.
3. Create a role for your CRM users and authorise the features for the relevant Sage 200 forms.
a. Open System Administration
> Companies > Roles
.
b. Create a role and assign your CRM users.
c. If your CRM users will not access the Sage 200 desktop, select
Remote User
Access only
.
Once selected, these users cannot access the Sage 200 desktop.
d. Right-click the role and authorise all the features.
Set up Sage 200 CRM in Sage 200 Accounts
In Sage 200 you set up the following:
1. Enter the CRM integration and webservice settings.
2. If required, choose to automatically generate order numbers in the SOP settings.
3. If required, choose to use segmented addresses in the system settings.
4. If required, set up a customer account in Sage 200 for prospect quotations.
Set the CRM Integration Settings in Sage 200
You must now enter the integration settings. These settings allow you to:
163
Sage 200 On Premise n
Make the profitability information available to all users when entering web orders.
n
Choose the amount of data that you wish to synchronise with Sage 200.
This determines the length of time taken to complete the initial synchronisation. We recommend that for the initial synchronisation you do not choose to synchronise all Sage 200 data. Once the initial synchronisation is successful, you can change the
Integration Level
to include further data if required. Once further data is included, the next synchronisation will take longer.
You can choose to synchronise the following data: n
Customers and suppliers only n
Customers, suppliers and products.
n
Customers, suppliers, products, quotes and sales orders.
You can also choose the number of sales orders and quotes to synchronise. This is done by date. You specify a
Date From
date. All quotes and orders with a
Document
Date
on or after this date are synchronised with Sage 200 CRM.
Open
Accounting System Manager > Settings > CRM Integration Settings
.
For more information, see the Sage 200 Help .
Choose to use auto numbers in the SOP settings
If you want to use Sage 200 CRM web orders to enter sales order and quotes via Sage 200 CRM, you must choose to automatically generate numbers for your sales orders and returns in Sage 200.
This is to make sure a Sage 200 order number is assigned to all quotes and sales orders created in
CRM.
Sage 200 CRM and Sage 200 use different numbering systems. If sales order numbers are not automatically generated in Sage 200, any orders created using web orders in CRM will not appear in
Sage 200. This is because they do not have a sales order number assigned to them.
Open: Sage 200 > Sales Order Processing > System Set Up > SOP
Settings|Document Numbering
For more information, see the Sage 200 Help .
Choose to use segmented addresses in the system settings
We recommend that you use segmented addresses in Sage 200. This is to make sure your customer and supplier addresses synchronise to the corresponding address fields in Sage 200
CRM.
Once selected, this creates separate address lines for
City
and
County
when entering customer and supplier addresses. This allows the synchronisation to match the
City
and
County
address lines in Sage 200 with the corresponding
City
and
County
address lines in Sage 200 CRM.
If you do not choose to use segmented addresses in Sage 200, the city and county address information is entered on the third and fourth address lines in Sage 200. When the data is
164
10 | Install and set up Sage 200 CRM synchronised, the city and county information will be on
Address lines 3
and
Address Line 4
in
Sage 200 CRM. This makes it harder to search your addresses in the Sage 200 CRM database.
Open: Sage 200 > Accounting System Manager > Settings > System Settings
.
For more information, see the Sage 200 Help .
Set up an account for prospect quotations in Sage 200 Accounts
If you want to use prospect accounts within CRM, you also need to create a customer account in
Sage 200 for your prospects. You can create a new customer account, or alternatively you can use an existing customer account.
If you create a new account, you can see the prospect accounts that have been raised on your Sage
200 CRM system and sent to Sage 200.
Once you have created a customer account for your prospects, you must set this as the default account in the Sales Order Processing module in Sage 200.
To create a prospect account in the Sales Ledger:
Open: Sage 200 > Sales Ledger > Customer Accounts > Enter New Account
.
For more information, see the Sage 200 Help .
165
Sage 200 On Premise
Set up the integration in Sage 200 CRM
To set up the Sage 200 CRM integration you must:
1. Create a new Sage 200 CRM integration.
2. Set up and enable the new integration.
3. Check the integration is working and synchronise the data.
Create a new Sage 200 CRM integration
1. Log on to Sage 200 CRM. The default
User Name
is
Admin
. There is no password.
2. From the
Administration
page, select
Integration
, and then select
Integration List
.
3. Click
New
.
The
New Integration
screen appears. This is where you set up the integration details.
166
10 | Install and set up Sage 200 CRM
4. Enter the following information: l
ERP Integration Name
.
Enter a description of the Sage 200 Accounts data that is being integrated.
l
ERP URL
.
Enter the address of the Sage 200 Services. This is your server name plus the port number for the Sage 200 Services and the name of the service. (
Sage
200Services/Sage200CRMSyncService.svc
). By default, the port number is
10443
.
The URL should be as follows:
https://
<your server name>
:10443/Sage200Services/Sage200CRMSyncService.svc
Note:
Once the URL has been saved, you cannot change it in the user interface.
l
ERP User Name
Enter the domain and name of the Windows user account that you set up for the Sage
200 Services, e.g.
<mydomainname>
\S200Services
.
This was the Windows user account that you specified for the Sage 200 Services when installing Sage 200 Accounts.
Once Sage 200 2015 is installed, this Windows user account is displayed on the Sage
200 Services application pool. For example:
167
Sage 200 On Premise l
ERP Password
Enter the password for this Windows user account.
Note:
If you enter the password incorrectly, you must reset IIS and then enter the correct password.
l
CRM Username
.
Enter the CRM user that is being used for the integration. We recommend that you set this to the
System Administrator
.
l
CRM Password
.
This is the password for the
CRM Username
that you have selected.
l
Company Name
.
Enter the name of the company data set up in Sage 200 System Administration. For example:
168
10 | Install and set up Sage 200 CRM
5. Click
Save
to accept the details.
The integration setup will begin. This may take a few minutes to complete.
Note:
The installation progress is not displayed on screen. The installation is taking place. Do not close the
Integration Configuration
page until the installation is complete and the page updates.
6. When complete, click
Continue
to save the information.
169
Sage 200 On Premise
Enter your integration settings
1. Click
Change
.
2. Enter the following information: l
Integration Timeout (seconds)
.
This is the length of time that CRM will wait for a response from the Sage 200 Service to return a response. The recommended setting is 300 seconds (5 minutes).
l
Sync Interval
.
This is the time taken between synchronisations.
For the first synchronisation, we recommend that this is set to
60
minutes. This is provide time to investigate any issues before the synchronisation starts again. This can be changed once the initial synchronisation has completed successfully.
l
Max Errors Allowed
.
This is the maximum number of errors that a synchronisation can report before the synchronisation is stopped. The default value is 100.
We recommend that this is set to
1
. This makes sure that the synchronisation fails on the first error and makes it easier to resolve any issues.
l
Default Territory
.
This is the territory that will automatically be assigned to every new entity created by the synchronisation. The default territory is
Worldwide
.
Note:
Orders and quotes are created using the same territory as their parent account.
l
Default Account Manager
.
The selected user will automatically be assigned as the account manager for any new entities that are created via the synchronisation. The primary team of the selected account manager will be used as the default team of the new record. This is not set as default.
3. Click
Save
to apply these changes to the integration.
4. Select the
Summary
tab. Click
Enable
.
A warning prompt appears.
5. Click
OK
to continue.
Next you must make sure that the CRM Integration Service is running.
170
10 | Install and set up Sage 200 CRM
Check the CRM Integration service
You can do this in the
Services
section of the Control Panel on your PC or you can use the
Run
box.
1. Choose
Start > Run
.
2. Enter
services.msc
in the box.
3. Click
OK
.The Services window appears.
4. Select
CRM Integration Service
from the list.
The
Properties
window appears.
171
Sage 200 On Premise
5. Make sure the
Startup type
is set to
Automatic
.
This ensures that each time the server is restarted, this service is also started.
Note:
If the service status is
Stopped
, click
Start
to restart the service.
6. Click
OK
.
The integration setup is complete.
Now that the integration is set up and running you must now set off the synchronisation process.
Run the synchronisation for the first time
1. Log into Sage CRM.
2. Open the
Integration Setting
that you have created.
3. Click
Immediate Sync
.
The synchronisation begins. The synchronisation may take some time depending on: n
The size of your Sage CRM and Sage 200 Accounts databases.
n
The amount of Sage 200 data you have chosen to include in the synchronisation.
n
The specifications of the system you are using and the resources available on your system when the synchronisation is running.
Note:
Do
not
use Sage 200 CRM while the synchronisation is taking place.
Once the initial synchronisation is complete, subsequent synchronisations only process records since the last synchronisation and are therefore much quicker.
Integration Log Files
Both Sage 200 CRM and Sage 200 have log files that can be used if problems are encountered when synchronising Sage 200 CRM and Sage 200. If the integration fails, check the CRM log files first.
CRM Integration Log Files
The CRM integration log file provides details of the synchronisation activity. By default only error information captured. This is set on the
Logging
tab of the integration screen in Sage 200 CRM.
The log file shows you where the synchronisation has failed. It shows the reason the synchronisation has failed and the relevant entity. Where possible additional information is included to help identify issues, such as the CRM record ID, the Sage 200 record ID, the document number, the warehouse name, the contact name and so forth.
To set the logging level and view the log file, select
Administration > Integration > Integration
List >
name of your integration
> View Log File
.
172
10 | Install and set up Sage 200 CRM
Sage 200 Services Log File
The Sage 200 Services log file provides information about the web service that controls the Sage
200 side of the integration. By default, the location is
C:\inetpub\Sage 200 App
Services\Sage200Services\Log\Sage200Services.log
.
By default, the logging level for the log file is set to
Error
. To provide information about the CRM integration, you must set the logging level to
Debug
.
To change the logging level for the Sage 200 Services:
1. Change the logging level in Sage 200 System Administration.
a. Open
System Administration > Logging
.
b. Choose
Debug
from the drop-down list.
2. Change the logging level and the pagination within the
web.config
file for the Sage 200
Services.
a. Open
C:\inetpub\Sage 200 App Services\Sage200Services\web.config
.
b. Change the logging level to
Debug
.
c. Change the
PaginationMaxRecordsToReturnValue
to
1
.
3. Change the permissions for the log folder. The
IUSR
,
Network Service
user and Local
System users must have permission to see this folder.
4. Reset IIS.
5. Run the synchronisation again to create the log file.
We recommend that once the issue is resolved, you change the logging level back to the default
Error
. This is to make sure that you don't have large log files created on your web server.
Note:
You must stop IIS before the log file can be renamed or deleted.
173
Sage 200 On Premise
Troubleshooting installing Sage 200 CRM
The following section covers some of the issues you may need to be aware of when installing and configuring Sage 200 CRM.
CRM freezes when trying to save the integration
This occurs if you have entered an incorrect
ERP password
for the
ERP User Name
on the integration.
To resolve this:
1. Reset IIS.
2. Enter the correct password and save the integration.
Error accessing the Progress Tab on the Integration in CRM
You may see an error message when trying to access the
Progress Tab
(
Administration >
Integration < Integration List
).
To resolve this you must change the
CRM Application Pool
to run under the same user as the
Sage 200 Services Application Pool
. You must also add the application pool user to the CRM
Library
folder.
To change the CRM application pool user
1. Open
IIS Manager > Application Pools
.
2. Right -click
CRM App Pool
and choose
Advanced Settings
.
174
10 | Install and set up Sage 200 CRM
3. In the
Process > Identity
section, change the user from
Local System
to the same user as the Sage 200 Web Services Application Pool.
To change the user on the CRM library folder
1. Browse to the Library folder. For a default installation of CRM, this is C:\Program
Files\Sage\CRM\<CRM install name>\.
2. Right-click the
Library
folder and choose
Properties > Security
.
3. Add the same user as the one you have just added to CRM Application Pool.
4. Allow the new user
Full Control
and click
OK
.
Note:
If you don't change the user on the
Library
folder, you will see the following error when creating a company in CRM:
Error - Folder could not be created : "C:\Program
Files\Sage\CRM\<CRM install name>\Library\<CRM Company name>"
.
This is to make sure that the
Real Time Data Views
and the
Pricing Service
can access Sage 200
Accounts and that you can access the
Progress
tab on the integration in CRM
To add the S200Services user to the CRM wwwroot folder
1. Browse to the WWWRoot folder. For a default installation of CRM, this is C:\Program
Files\Sage\CRM\<CRM install name>\.
2. Right-click the
WWWRoot
folder and choose
Properties > Security
.
3. Add the S200Services user.
4. Allow the new user
Full Control
and click
OK
.
175
Sage 200 On Premise
URL rewriter error when installing Sage 200 CRM
You may see the following error message when installing Sage 200 CRM 7.1.
To resolve this you must re-start the TomCat service.
Recreate views manually error
After you have logged into CRM for the first time, you may see the following error.
There are several reasons why this message appears:
To check for the most up to date information regarding this error, see Ask Sage article 31797.
176
10 | Install and set up Sage 200 CRM
Sage 200 CRM takes a long time to synchronise accounts or the synchronisation fails with a timeout error
If you are running the Sage 200 CRM synchronisation on a machine that does not have Internet access, it can take a long time to synchronise accounts or the synchronisation may fail with a timeout error.
This can occur because the web service used to synchronise accounts tries to check for revoked certificates online. To speed up the synchronisation, it is possible to turn off this check.
Important
This setting should only be changed on a PC that does not connect to the Internet. If the PC is later connected to the Internet, the original setting must be restored.
1. Open Internet Explorer.
2.
Select Tools > Internet Options > Advanced
.
3. Scroll down the
Settings
list to the
Security
section.
4. Clear the checkbox for
Check for publisher’s certificate revocation
.
5. Click
OK
to close Internet Explorer.
6. Reboot your PC and restart the Sage 200 CRM synchronisation.
177
Sage 200 On Premise
Set up Form Launching
If you want to open Accounts forms from within CRM, you must make sure that the Sage Task
Launcher is installed and configured correctly and that your CRM users have access to the
Accounts database and the relevant Accounts forms.
To launch Accounts forms from CRM:
n
The Accounts Client must be installed on the same PC that you are using to access CRM.
n
The Sage Task Launcher must be installed on the client PC.
n
The Task Launcher must be running on the same port that is specified in the
Administration
> System > ERP Form Launch Settings
. This is
8088
by default.
You can check the port number the Task Launcher is using, from the system tray.
For more information about changing the port for the Task Launcher, or about using the Task
Launcher on a Terminal/ Citrix server, see
Changing the port number for the Form Launcher
n
The Task Launcher Listener application must be running:
Start > All Programs > Sage
Task Launcher > Sage Task Launcher Listener
.
n
Users must have access the Accounts Forms in CRM. This is specified in the
Administration > Users > User Details
.
n
Users must have access to the Accounts database and Accounts forms in Sage 200 System
Administration. See
Set up user accounts on page 162 .
Change the port number for the Form Launcher
By default, the Sage 200 CRM Task Launcher Listener listens on port
8088
. If this port is already in use, then you must change the port in the Task Launcher Listener and in Sage 200 CRM.
To change the port in the Sage 200 Task Launcher Listener
To change the port in the Sage 200 Task Launcher, you must edit a value in the registry.
178
10 | Install and set up Sage 200 CRM
1. To open the Registry Editor, choose
Start > Run
.
2. Enter
regedit
in the
Open
box.
3. Click
OK
. The Registry Editor window appears.
4. Select
HKEY_LOCAL_MACHINE > SOFTWARE > Sage > TaskLauncher
.
5. In the right pane, right-click on
Port
.
6. Select
Modify
from the pop- up menu. The
Edit String
window appears.
7. Enter the new port value in the
Value Data
box.
Note:
This port must not be blocked by a firewall.
8. Stop the Task Launcher Listener. Right-click on the system tray icon and select
Stop
Listener
from the pop-up menu.
9. To apply your changes, select
Start Listener
from the pop-up menu.
Next you must change the Sage 200 CRM settings to use the same port number.
To change the port in Sage 200 CRM
To change the port number used in the Task Launcher URL generated by Sage 200 CRM:
1. Open Sage 200 CRM.
2. Select
Administration > System > ERP Form Launch Settings
. The
Sage 200
Accounts Form Launch Settings
page appears.
3. Enter the new
Port Number
.
Note:
This port must not be blocked by a firewall.
4. To confirm the new port number, click
Save
.
Using the Form Launcher with Terminal Services, Remote Desktop
Services and Citrix
Running form launcher for multiple users on Terminal Services/Remote Desktop Services or Citrix requires additional configuration. You must: n
Set the
Task Launcher
service to run automatically.
n
Set the Task Launcher to run in
Multi-user
mode on the client desktop.
If you are deploying Form Launcher with Remote Desktop Services on Windows 2012 or 2012 R2 you must also enable the IIS Features '.NET 3.5' and '.NET Extensibility 3.5'. The Task Launcher service will not start correctly without these features.
For further information on how to configure Sage 200 with Citrix and Terminal Services, see
Installing Sage 200 using Citrix or Terminal Services on page 32
.
179
Sage 200 On Premise
To set the Task Launcher Service to run automatically
1. From the Start menu, select
Control Panel > Administrative Tools > Services
.
2. Right-click the
Sage Task Launcher Service
.
3. Select
Properties
from the pop-up menu.
4. Select
Automatic
from the
Startup type
drop-down list.
5. Click
Start
, to start the service.
6. To confirm the changes, click
OK
.
To set the Task Launcher to multi user mode
In a Terminal Services, Remote Desktop Services and Citrix environment, you must set the Sage
Task Launcher to run in multi user mode. To do this, you must add a startup parameter to the Sage
Task Launcher shortcut.
You can set up the Sage Task Launcher for individual users or for all users.
To set the Sage Task Launcher for individual users
1. On the client machine, open the
Sage Task Launcher Listener
from the user's Startup folder. The location of this folder can differ between operating systems. From the 'run' dialog
(Start > Run) the following command will take you to the current logged in user's startup directory:
shell:startup
An example of this folder might be:
C:\Users\desktop.admin\AppData\Roaming\Microsoft\Windows\Start
Menu\Programs\Startup
.
2. Right-click the Sage Task Launcher Listener shortcut.
3. Select
Properties
from the pop-up menu.
4. Add
/mode:M
to the end of the
Target
string.
5. To confirm the changes, click
OK
.
To set the Sage Task Launcher startup mode for all users
Follow the instructions above using the
Startup
folder in the
All Users
group.
The location of this folder can differ between operating systems. To find it, from the 'run' dialog (Start
> Run), enter the following command:
shell:common startup
This will ensurethat each user has the Task Launcher running in the correct mode within their session.
Note:
This application typically uses about 20MB of memory.
180
10 | Install and set up Sage 200 CRM
Troubleshooting
The first time you launch an Accounts form from CRM, the form may take some time to open.
If you cannot launch Accounts forms from CRM, check the following:
Does the user have access to the relevant Accounts database?
Does the user have access in Accounts to the form you want to launch?
Does the user have access in CRM to the form you want to launch ?
Is there is an error on the webpage?
If so, check the error details in your browser.
Does the port number match the port number specified in the ERP Form Launch settings?
Are there other applications running on the port specified for the Task Launcher? If this port is already in use, change the port for the Task Launcher.
Is the Task Launcher running?
To check this, stop and re-start the Task Launcher, by right-clicking the icon in the system tray.
Do you have pop-up blocker enabled in your web brower?
181
Sage 200 On Premise
Are you using Internet Explorer? Is
Protected Mode
turned on?
If so, add the CRM website to the list of trusted sites for each CRM user.
The CRM website is in the Local Intranet zone. This has the protected mode enabled when
UAC is turned on. When you attempt to launch forms, the CRM website posts a request to the local machine. This is blocked by Internet Explorer. Adding the CRM web server to the list of trusted sites will allow CRM to launch forms on the user's session, as trusted sites do not have protected mode enabled by default.
To do this: a. Open Internet Explorer and select
Tools > Internet Options
.
b. Select the
Security
tab.
c. Select
Trusted Sites
.
d. Click
Sites
.
e. Enter the URL for CRM in to the box.
For example, if your CRM URL is
https://myserver/CRM/eware.dll
, enter the URL as
https://myserver
.
f. Click
Add
and the URL will now appear in the trusted websites list.
Note:
You may be prompted to have a secure URL; clear the
Require server verification (https:) for all sites in this zone
check box, if you are not using https for your CRM site.
g. Click
Close
on the
Trusted Sites
window.
h. Click
OK
to apply these changes.
If you opened the Internet options from within Internet Explorer then you should restart
Internet Explorer to ensure the changes are applied.
If you run Internet Explorer again and navigate to the CRM website, the status at the bottom right of Internet Explorer is
Trusted Sites: Protected Mode Off
. You can now launch Sage
200 forms from CRM.
For more information see Ask Sage Article 28206 .
182
11
Upgrading Sage 200 CRM
Use this chapter if you are upgrading from Sage 200 CRM 7.2 d hotfix 1 integrated with Sage 200 2013 R2.
To upgrade from earlier versions of Sage 200, please see the Upgrading CRM Guide.
IMPORTANT
You
must
upgrade your existing installation of Sage 200 in a test environment before upgrading live data.
This section is designed to be read prior to starting the upgrade process.
Testing an upgrade prior to going live is critical to minimise any impact on your customer. By following the steps in this section you will have clear documented steps and an audit of events should any problems occur either during the test upgrade or at 'go live' with the customer.
Do not dispose of your test environment until the live upgrade has been performed and the end user is satisfied that the upgrade has completed successfully.
Should problems be encountered during the test stage or at go live, technical support will assist in identifying the root cause provided that evidence of the pre-checks are available as outlined in this document. If it is evident that the pre-checks have not been carried out, we would endeavour to assist, however this would be on a chargeable basis.
If you are unsure about anything outlined in this section, or during the upgrade process please contact
Sage Technical Support. It is better to address issues as they arise in the test environment than afterwards when an issue may impact the end user.
Key facts for upgrading Sage 200 CRM:
1. You must upgrades all parts of Sage 200 at the same time. If you upgrade Sage 200, you must also upgrade Sage 200 CRM and vice versa.
183
Sage 200 On Premise
2. Your existing installation of Sage 200 CRM
must
be v7.2d hotfix 1.
You can check the version of Sage 200 CRM that you are using from the CRM log on window.
3. Your existing installation of Sage 200 must be Sage 200 2013 R2.
To upgrade from earlier versions of Sage 200, please see the Upgrading CRM Guide.
184
11 | Upgrading Sage 200 CRM
Checklist to upgrade from 2013 R2 to 2015
This is designed to be used as a printable checklist of the steps required to upgrade Sage 200 CRM from v7.2d HF1 to 7.3. For more detailed information about the required steps, see
200 CRM - detailed steps on page 188
.
To upgrade from earlier versions of Sage 200, please see the Upgrading CRM Guide.
Create a test environment
You
must
upgrade in a test environment first.
The environment must be as close to the live system as possible. This includes the operating system and SQL set up. You must also ensure that the customer system and test environment comply with the current Sage 200 CRM system requirements.
See
System requirements and prerequisites on page 3 .
Important
Consider the impact of bulk changes to the data (such as Data Uploads or File Import routines) in the period between the test upgrade and the live upgrade. Such procedures may introduce data anomalies which could prevent an integration from completing successfully. If you must perform such a process, you should also create a new test environment to include these changes and retest the WHOLE upgrade process outlined in the checklist.
Install the customer’s current Sage 200 and CRM applications into the Test Environment.
Take a complete backup of the customer's live Sage 200 Sage CRM system, including:
Registry files
Program files
Database
Attach the backup to the CRM application within the Test Environment.
Complete a backup of the Sage 200 database.
Attach the backup to the Sage 200 application within the Test Environment.
Copy the
WWWROOT
folder from the live site into test environment.
Ensure the
CRM Integration
service is disabled.
185
Sage 200 On Premise
As you have moved the CRM database to a new test location, you must change the URL for the integration in the CRM database. This makes sure that the test integration uses the correct address.
UPDATE
ERPIntegrations
SET
ERPI_ERPURL = 'https://<your server name>:10443/Sage200Services/Sage200CRMSyncService.svc'
WHERE
ERPI_IntegrationID =
NN
UPDATE
ERPIntegrations
SET
ERPI_ERPUser = '<Your Domain name\Username>'
WHERE
ERPI_IntegrationID =
NN
UPDATE
ERPIntegrations
SET
ERPI_ERPPassword = '<your password>'
WHERE
ERPI_IntegrationID =
NN
(
NN
is the correct ID for your live integration).
Re-set IIS.
Re-enable the Integration Service.
Ensure that the Max Errors value within each CRM Integration is set to 1 at all times during the integration process. Failure to do so can cause anomalies in the integrated data.
Test the integration in the customer’s current version of CRM.
Ensure that it completes correctly. If it does not, you must resolve any issues before proceeding. Take thorough notes of any steps taken to rectify problems at this stage, as these changes must also be made to the live data before performing an upgrade.
Upgrade Sage 200 CRM to v7.3
Check that your
Entity Mappings
are correct. See
Step 2: Check that your Entity Mappings are correct on page 1 .
Disable the integration.
Check your SQL server settings.
You must make sure your SQL Server Protocols have both
TCP/IP
and
Named Pipes
enabled.
Check that your version of Sage 200 CRM is 7.2d HF1.
Disable your table level triggers. See
Step 6: Disable your table level triggers on page 1 .
Disable the CRM services and IIS application pools used by CRM.
Uninstall Sage 200 Accounts.
186
11 | Upgrading Sage 200 CRM
Install Sage 200 Accounts 2015.
See
Install Sage 200 on your server on page 50
.
Set the
CRM Integration Settings
in Sage 200.
Install Sage 200 CRM 7.3.
Confirm that the CRM services and IIS application pools used by CRM have started.
Configure the CRM web site to use the
Application pool identity
.
See
Step 15: Configure the CRM web site to use the Application pool identity on page 1 .
Reset IIS.
Enable your table level triggers.
Run the CRM Synchronisation Reset tool.
If you have added your own customisations to Sage 200 CRM:
Re-apply customisations you have made to the Views and the Sage 200
CRM database.
Re-index your CRM database.
Synchronise your Sage 200 CRM data.
Confirm that there is a
Sage 200 Groups
tab in
My CRM
. This is to make sure that the Sage
200 CRM customisations have been applied by the synchronisation.
Re-apply any customisations that you have made to the screens that have changed.
See on page 1 .
Test the functionality in Sage 200 CRM (create new records, try form launching, order processing etc).
Make sure that all functionality performs as expected and that all records synchronise successfully. Pay particular attention to areas of the software that have been customised.
Make sure the end user has an opportunity to use and review the test environment before performing the live upgrade.
Back up your data.
187
Sage 200 On Premise
Upgrading Sage 200 CRM - detailed steps
Follow the steps in this section if your current installation of Sage 200 CRM is 7.2d hotfix 1 and your current version of Sage 200 is 2013 R2.
To upgrade from earlier versions of Sage 200, please see the Upgrading CRM Guide.
For a printable check list of these steps , see
Checklist to upgrade from 2013 R2 to 2015 on page
Entity Mappings
Before you upgrade your data you
must
check your Entity mappings are correct.
The integration between Accounts and CRM processes any changes to each CRM entity in a specified order.
You can see how CRM handles each mapping on the
Administration > Integration > Integration
List Entity Mappings
tab in CRM. This shows the direction that data is synchronised and whether the information in CRM or the information in Accounts takes priority.
Changing these settings may adversely affect how the data is synchronised and can cause the synchronisation to fail.
Note:
Sage 200 CRM is
not
supported when the Entity Mappings have been changed
See
Step 2: Check that your Entity Mappings are correct on page 191
.
188
11 | Upgrading Sage 200 CRM
Important Note for users of Sage 200 CRM where Sage 200 is
NOT synchronised
If you have turned off the synchronisation between Sage CRM and Sage 200 and both programs are run as standalone systems and are not integrated with one another, you
must
complete the following additional steps.
When upgrading Sage 200 CRM, a synchronisation is applied to the system. The customisations, included in the upgrade, will not be applied if the synchronisation is not run.
In this case you must complete the following steps:
1. Create a new Sage 200 company. This creates a new company with a blank database.
2. Set up an integration with this new Sage 200 company.
3. Run a synchronisation between CRM and the new blank database.
This applies the customisations.
4. Disable the integration between CRM and the database and remove if required.
This applies the customisations to the blank database. This ensures that account entities are linked to a company. If you do not do this, you will not be able to enter quotes and orders against the company after installing Sage 200 CRM 7.1.
Step 1: Create a test environment
The test environment must be as close to the live system as possible. This includes the operating system and SQL set up. You must also ensure that the customer system and test environment comply with the current Sage 200 CRM system requirements.
Note:
When setting up a test environment for your site, we recommend that you either use a separate system or a Virtual Machine. CRM is not supported when it is installed more than once on the same server.
Important
Consider the impact of bulk changes to the data (such as Data Uploads or File Import routines) in the period between the test upgrade and the live upgrade. Such procedures may introduce data anomalies which could prevent an integration from completing successfully. If you must perform such a process, you should also create a new test environment to include these changes and retest the WHOLE upgrade process outlined in the checklist.
To install Sage 200 CRM in the test environment:
189
Sage 200 On Premise
1. Install the customer’s current Sage 200 and CRM applications into the Test Environment.
2. Take a complete backup of the customer’s live Sage 200 CRM system, including: l
Registry files l
Program files l
Database
3. Attach the backup to the CRM application within the Test Environment.
4. Complete a backup of the Sage 200 database.
5. Attach the backup to the Sage 200 application within the Test Environment.
6. Copy the
WWWROOT
folder from the live site into test environment.
7. Ensure the
CRM Integration
service is disabled.
8. As you have moved the CRM database to a new test location, you must change the URL for the integration in the CRM database. This makes sure that the test integration uses the correct address.
To update
ERPIntegrations
:
UPDATE
ERPIntegrations
SET
ERPI_ERPURL = 'https://<your server name>:10443/Sage200Services/Sage200CRMSyncService.svc'
WHERE
ERPI_IntegrationID =
NN
UPDATE
ERPIntegrations
SET
ERPI_ERPUser = '<Your Domain name\Username>'
WHERE
ERPI_IntegrationID =
NN
UPDATE
ERPIntegrations
SET
ERPI_ERPPassword = '<your password>'
WHERE
ERPI_IntegrationID =
NN
(
NN
is the correct ID for your live integration).
9. Re-set IIS.
10. Re-enable the Integration Service.
11.
Ensure that the Max Errors value within each CRM Integration is set to 1 at all times during the integration process. Failure to do so can cause anomalies in the integrated data.
12. Test the integration in the customer’s current version of CRM.
Ensure that it completes correctly. If it does not, you must resolve any issues before proceeding. Take thorough notes of any steps taken to rectify problems at this stage, as these changes must also be made to the live data before performing an upgrade
190
11 | Upgrading Sage 200 CRM
Step 2: Check that your Entity Mappings are correct
The integration between Accounts and CRM processes any changes to each CRM entity in a specified order.
You can see how CRM handles each mapping on the
Administration > Integration > Integration
List Entity Mappings
tab in CRM. This shows the direction that data is synchronised and whether the information in CRM or the information in Accounts takes priority.
Changing these settings may adversely affect how the data is synchronised and can cause the synchronisation to fail.
Note:
Sage 200 CRM is
not
supported when the Entity Mappings have been changed
Before you upgrade your data you must check your Entity mappings are correct.
To do this:
1. Run the following SQL script to show your current mappings:
SELECT ERPE_ERPEntityMappingsID, ERPE_MappingName, ERPE_
Winner, ERPE_SyncData, ERPE_SyncOrder
FROM ERPEntityMappings where ERPE_Deleted is null
191
Sage 200 On Premise
order by ERPE_SyncOrder
2. Confirm that these match the following settings:
Entity Mapping Name
ProductFamily Mapping
UOMFamily Mapping
PricingList Mapping
UOM Mapping
New Product Mapping
Pricing Mapping
Account Mapping
Tax Rate Mapping
Country Code Mapping
Account Type Mapping
Payment Terms Basis Mapping
ERP
ERP
Customer Discount Group Mapping ERP
Value Discount Group Mapping ERP
Warehouse Mapping
Order Mapping
Quote Mapping
Stock Item Unit Mapping
ERP Settings Mapping
ERP
ERP
ERP
ERP
ERP
ERP
ERP
ERP
ERP
ERP Winner ERP Synch Data
ERP ERPCRM
ERP
ERP
ERP
ERP
ERPCRM
ERPCRM
ERPCRM
ERPCRM
ERPCRM
Both
ERPCRM
ERPCRM
ERPCRM
ERPCRM
ERPCRM
ERPCRM
ERPCRM
Both
ERPCRM
ERPCRM
ERPCRM
If your Entity Mappings are different, contact Technical Support before continuing with the upgrade.
Step 3: Disable the integration
Step 4: Check your SQL server settings
You must make sure your SQL Server Protocols have both
TCP/IP
and
Named Pipes
enabled in the SQL Server Configuration Manager (
SQL Server Network Configuration > Protocols for
SQL 2008
) .
192
11 | Upgrading Sage 200 CRM
Step 5: Check your version of Sage 200 CRM.
Check that your installed version of Sage 200 CRM is 7.2 d( 2013 R2).
Step 6: Disable your table level triggers
We recommend that these are disabled before upgrading.
If your triggers are not disabled, you will see the following message when installing CRM 7.2.
1. Use the following SQL script to locate your triggers. Make a note of the triggers that are currently disabled as you don't want to re-enable these at the end of the installation.
SELECT [Table] = OBJECT_NAME(o.parent_obj), [Trigger] = o.[name], [Type] = CASE WHEN
(
SELECT cmptlevel FROM master.dbo.sysdatabases
WHERE [name] = DB_NAME() ) = 80 THEN
CASE WHEN
OBJECTPROPERTY(o.[id], 'ExecIsInsteadOfTrigger') = 1 THEN
'Instead Of' ELSE 'After'
END
ELSE
'After'
END,
[Insert] = CASE WHEN OBJECTPROPERTY(o.[id],
'ExecIsInsertTrigger') = 1 THEN 'Yes'
193
Sage 200 On Premise
ELSE
'No'
END,
[Update] = CASE WHEN OBJECTPROPERTY(o.[id],
'ExecIsUpdateTrigger') = 1 THEN 'Yes'
ELSE
'No'
END,
[Delete] = CASE WHEN OBJECTPROPERTY(o.[id],
'ExecIsDeleteTrigger') = 1 THEN 'Yes'
ELSE
'No'
END,
[Enabled?] = CASE WHEN OBJECTPROPERTY(o.[id],
'ExecIsTriggerDisabled') = 0 THEN 'Enabled'
ELSE
'Disabled'
END
FROM sysobjects o
WHERE OBJECTPROPERTY(o.[id], 'IsTrigger') = 1
194
11 | Upgrading Sage 200 CRM
2. Disable your triggers in one of the following ways: n
Disable
all
triggers using the following SQL script:
sp_msforeachtable 'ALTER TABLE ? DISABLE TRIGGER all'
n
Manually disable your live triggers in the SQL database tables.
Expand each relevant table in your SQL database, select the trigger and click
Disable
.
Step 7: Disable the services used by Sage 200 CRM
The following services are used by Sage 200 CRM. Disable the following services (
services.msc
), if they are installed, before you upgrade your Sage 200 CRM data: n
APACHE Tomcat CRMTomcat6
n
CRM Indexer Service
n
CRM Integration Service
n
CRM E-Mail Manager
n
CRM Escalation Service
n
Jspel Spell Checker
Step 8: Stop the IIS application pools used by CRM
You must stop the application pools used by CRM in IIS Manager (
inetmgr
), before you upgrade your Sage 200 CRM data. The application pools are: n
CRM App Pool
n
CRMUrlRedirector App Pool
195
Sage 200 On Premise
Step 9: Uninstall Sage 200 Accounts
Step 10: Install Sage 200 Accounts 2015
See
Install Sage 200 on your server on page 50
.
Step 11: Set the required integration level in Sage 200
In the
CRM Integration Settings
in Sage 200 Accounts, you can choose how much of your data you want to integrate with Sage 200 CRM. You can choose to synchronise: n
Customers and suppliers only.
n
Customers, suppliers and products.
n
Customers, suppliers, products, sales orders and quotations.
You can also select which sales orders and quotes to synchronise. This is done by date.
We recommend that for your initial synchronisation, you do not synchronise all your data, as this may take some time depending on the amount of data in your Sage 200 database. Once the initial synchronisation is successful, you can change the
CRM Integration Settings
to include further data.
Open: Sage 200 Accounts > Accounting System Manager > Settings > CRM
Integration Settings
.
Step 12: Install Sage 200 CRM 7.3
The install file is located in the
Sage 200 CRM
folder on your Sage 200 DVD.
Step 13: Start the services used by Sage 200 CRM
The following services are used by Sage 200 CRM. Start the following services (
service.msc
) and set the
Start Type
to
Automatic
before you synchronise your Sage 200 CRM data: n
APACHE Tomcat CRMTomcat6
n
CRM Indexer Service
n
CRM Integration Service
n
CRM E-Mail Manager
n
CRM Escalation Service
n
Jspel Spell Checker
Step 14: Confirm the IIS application pools used by CRM are started
There are two application pools used by CRM. You must make sure these are started in IIS Manager
(
inetmgr
), before you synchronise your Sage 200 CRM data. The two application pools are:
196
11 | Upgrading Sage 200 CRM n
CRM App Pool
n
CRMRewriter App Pool
Step 15: Configure the CRM web site
You must configure the CRM web site to use the application pool identity and change the CRM application pool user. This is to allow the Pricing Service and Real Time Data Views to access the
Sage 200 Accounts, and to make sure that you can access the
Progress
tab on the integration.
To change the application pool identity
1. Open
Internet Information Services (IIS) Manager
.
2. On the
Connections
pane, select
Sites > Default Web Site
.
3. Select the web site for your installation of CRM.
This is the
Installation name
that you entered in step 5 of the Sage 200 CRM installation process.
4. From the
Features View
, double click
Authentication
. This opens the Authentication settings.
5. Right-click
Anonymous Authentication
and select
Edit
.
6. Select
Application pool identity
and click
OK
.
To change the CRM application pool user
1. Open
IIS Manager > Application Pools
.
2. Right -click
CRM App Pool
and choose
Advanced Settings
.
197
Sage 200 On Premise
3. In the
Process > Identity
section, change the user from
Local System
to the same user as the Sage 200 Web Services Application Pool.
To change the user on the CRM library folder
1. Browse to the Library folder. For a default installation of CRM, this is C:\Program
Files\Sage\CRM\<CRM install name>\.
2. Right-click the
Library
folder and choose
Properties > Security
.
3. Add the same user as the one you have just added to CRM Application Pool.
4. Allow the new user
Full Control
and click
OK
.
Note:
If you don't change the user on the
Library
folder, you will see the following error when creating a company in CRM:
Error - Folder could not be created : "C:\Program
Files\Sage\CRM\<CRM install name>\Library\<CRM Company name>"
.
This is to make sure that the
Real Time Data Views
and the
Pricing Service
can access Sage 200
Accounts and that you can access the
Progress
tab on the integration in CRM
To add the S200Services user to the CRM wwwroot folder
1. Browse to the WWWRoot folder. For a default installation of CRM, this is C:\Program
Files\Sage\CRM\<CRM install name>\.
2. Right-click the
WWWRoot
folder and choose
Properties > Security
.
3. Add the S200Services user.
4. Allow the new user
Full Control
and click
OK
.
198
11 | Upgrading Sage 200 CRM
Step 16: Reset IIS
Step 17: Enable your table level triggers.
You must enable your live triggers after you have installed the upgrade. Use one of the following methods: n
Use a SQL script: a. Run the following SQL script to enable
all
triggers.
sp_msforeachtable 'ALTER TABLE ? ENABLE TRIGGER'
b. Manually disable the now live triggers that were previously disabled. These are the ones you made a note of in Step 6.
n
Manually enable your live triggers: a. Expand each relevant table in your SQL database.
b. Select the trigger and click
Enable
.
See
Step 6: Disable your table level triggers on page 193
.
Step 18: Run the Synchronisation Reset utility
The first synchronisation that occurs after you upgraded Sage 200 and Sage 200 CRM should only include database changes made in the new versions and not data records. This utility makes sure that only changes to Sage 200 CRM integration are included in the synchronisation, when a new version of Sage 200 is installed.
1. Download the
CRM Synchronisation Reset
tool from the Sage website.
2. Open the tool and click
Next
on the welcome screen.
3. Enter the name of the SQL server instance where the Sage 200 database in installed, or select it from the
Select SQL Server Instance
drop-down list.
4. Click
Refresh
to load the available databases.
5. Enter the user name and password for the SQL Server instance and click
OK
.
6. Enter or select the name of the Sage 200 database and click
Next
.
7. To proceed with the updates to the oplock values, click
Finish
.
See
CRM Synchronisation Reset application on page 207
.
Step 19: Additional steps for customised CRM
If you have added your own customisations to Sage 200 CRM:
1. You must re-apply the following customisations
before
you run the synchronisation: n
Customisations made to Views, where you have received a warning about the View during the upgrade process.
199
Sage 200 On Premise
Note:
Customisations made to the
vOpportunity
view must re-applied to the view created by Sage 200, after the first synchronisation.
n
Customisations made to the Sage 200 CRM database.
Step 20: Re-index your CRM database
This can reduce the time it takes the first synchronisation to complete after upgrading.
Step 21: Synchronise your Sage 200 CRM data
You must correct any errors that occur during the synchronisation process. Take thorough notes of any changes you make as you will also need to make these changes to the live environment. You should only continue with the rest of the upgrade if synchronisation is successful.
1. Log on to Sage 200 CRM.
2. Start the synchronisation (
Administration> Integration> Integration List >
Integration
Name
> Immediate Synch
).
The upgraded integration details are still displayed.
The synchronisation begins. The synchronisation may take some time depending on: n
The size of your Sage CRM and Sage 200 Accounts databases.
n
The amount of Sage 200 data you have chosen to include in the synchronisation.
n
The specifications of the system you are using and the resources available on your system when the synchronisation is running.
Note:
Do
not
use Sage 200 CRM while the synchronisation is taking place.
The
Progress
tab shows the number of records remaining to be synchronised for each entity.
Use the
Refresh
button to update this page.
The synchronisation is finished when the
Synch Status
shows
Success
or
Failed
and the
Last Synch Time
and
Next Synch Time
are completed.
Step 22: Check the Sage 200 customisations have been applied
To confirm that the Sage 200 CRM customisations have been applied by the synchronisation, make sure you have a
Sage 200 Groups
tab in
My CRM
.
Step 23: Re -apply customisations
You must
re-apply
any customisations that you have made to screens that have been changed in the new version of Sage 200 CRM.
For more information and to see the list of the screens that have been changed in each version of
Sage 200 CRM, see on page 1 .
200
11 | Upgrading Sage 200 CRM
Step 24: Test the functionality in Sage 200 CRM
Important
In the time between performing the test upgrade and the live upgrade do not make any customisations to the CRM or Sage 200 Application. If you must do so, you should also create a new test environment to include these changes and re-test the WHOLE upgrade process outlined in the previous pages.
1. Make sure that all functionality performs as expected and that all records synchronise successfully. Pay particular attention to areas of the software that have been customised.
2. Make sure the end user has an opportunity to use and review the test environment before performing the live upgrade.
201
Sage 200 On Premise
Upgrading customised CRM
This chapter provides additional information about how to upgrade Sage 200 CRM if you have added your own customisations.
There are three types of customisations: n
Customisation of screens n
Customisation of Views n
Customisations to the database.
Upgrading customisation of screens
When you upgrade Sage 200 CRM, the first synchronisation after installing the new version adds all the Sage 200 CRM customisations that have changed in the new version.
These customisations can be new screens or changes to existing customised screens.
If you have added your own customisation to one of the screens that has changed in the new version of Sage 200 CRM, you will need to re-apply that customisation after you have upgraded and synchronised your data.
Each of the Sage 200 customisations XML files has a version number. When the synchronisation is run, the web service method only applies those customisations with the higher version number. For
2013 R2 , the customisations version number is 17.2.1.
For a list of the screens that have changed for each version, see on page 1 .
Once you have installed upgraded:
1. Synchronise your data.
2. Check which screens have changed.
See on page 1 .
3. Re-apply any of your customsiations that have been made to screens that have changed.
Upgrading customisations of Views
The Opportunity view, (
vOpportunity
,) is customised by Sage 200 CRM and this customisation is applied as part of the first synchronisation. Therefore, any customisations you have made to the
vOpportunity
view must be re-applied to the view created by Sage 200, after the first synchronisation.
Sage 200 CRM checks the remaining Views to see if they need updating as part of the upgrade process. If you have customised a View that requires updating, the customisation will be overwritten. In this case, a log file is created and a warning is displayed during the upgrade process.
202
11 | Upgrading Sage 200 CRM
If you receive any of these warnings during the upgrade process, you must re-apply the customisations to these Views
before
you run a synchronisation.
Upgrading Database customisations
If you have made customisations to the Sage 200 CRM database, these customisations must be reapplied
before
you run a synchronisation. This is because the synchronisation may be reliant on these customisations.
Customisations of tables and columns
Any customisations you make to tables or columns in Sage 200 CRM must be alphanumeric and must not contain any special characters.
When non-alphanumeric characters are included the synchronisation may fail and the data may not display properly in CRM.
Custom Triggers
Custom triggers in the CRM database may cause the upgrade scripts to fail.
When this occurs, the script completes with errors and the trigger name can be found in the script results.
To resolve this: n
Remove the trigger.
n
Run the script.
n
Re-apply the trigger.
Using the Component Manager to re-apply customisations
If your customisations have been recorded using the CRM Component Manager your existing screen may be replaced with a new version of the screen. In this situation, you must manually reapply any changes to the screen. You should not run any customisation scripts you have created using the Component Manager. Running a customisation script created in a previous version of
Sage 200 CRM will delete the Sage 200 CRM upgrade changes.
Tip:
You can use the Component Manager to transfer customisations from the test system to the live system. To do this:
1. Re- apply your customisations to test system.
2. Make a list of all the screens that you have changed.
3. In the Component Manager, start a new component.
203
Sage 200 On Premise
4. Open and save each customised screen.
5. Stop and script out the new component.
6. Apply the new component to the live system.
For more information about using the Component Manager, see the CRM Developer Help.
204
11 | Upgrading Sage 200 CRM
CRM Integration tools
We have provided some additional tools to be used as part of the upgrade process. However these tools are not version specific and can be run at any time.
n
The
CRM Integrity tool
is a module of the Sage 200 Support tool. It runs a series of checks against your CRM data and provides information about your CRM data that could cause problems with your upgrade.
n
The CRM Synchronisation Reset application is designed to improve the speed of your synchronisation.
The CRM Integrity tool
This tool runs a sequence of data validation checks against a selected CRM database. It then provides information about your CRM data that could cause problems with your upgrade.
If any problems are reported, the tool directs you to additional information and/or a SQL script on the support area of the Sage website. This will help you to resolve potential issues before proceeding with the upgrade.
Note:
Before running any of these scripts, you must make sure that you have backed up your
CRM database, disabled the integration and that no users are logged onto Sage 200 CRM.
This tool is not version specific and can be run at any time. We recommend that you always run this tool before and after upgrading Sage 200 CRM, to check your data.
Using the CRM Integrity tool
1. Download the tool from the Sage 200 CRM support area of the Sage website: www.sage.co.uk/Sage200CRMSupport/Tech Support .
2. Open the tool and select the relevant SQL instance and CRM database.
a. Click
Run
.
205
Sage 200 On Premise
3. The validation checks are run and marked with a tick or a cross to indicate potential problems.
4. Select a validation check to see more information about the check and to follow a link to a resolution on the Sage support website.
206
11 | Upgrading Sage 200 CRM
CRM Synchronisation Reset application
This utility is designed to improve the speed of the synchronisation when upgrading Sage 200 and
Sage 200 CRM. It can be used with any version of Sage 200 CRM.
Every time a record is added or changed in Sage 200. The record is stamped with an incremental number. By stamping the record the system knows in which order the records were added or amended. The field that is used to hold this information is called
OpLock
.
When a synchronisation with CRM takes place, the integration service needs to know which records have been amended since the last synchronisation. To do this, the integration service stores the last oplock value for each entity that was included in the synchronisation. The next time a synchronisation is run the integration service requests all records that have a higher oplock value than the last one stored.
When you upgrade to a new version of Sage 200, changes are made to the database tables. The oplock values are then updated for all records in that table. If these tables synchronise with Sage
200 CRM, all records in these tables will be included in the next synchronisation with Sage 200
CRM. This can then make the next synchronisation considerably longer than usual. For example, if changes are made to the sales orders tables, then all sales orders will be re-synchronised with Sage
200 CRM, even though no data values have changed.
The CRM Synchronisation Reset application updates the oplock values on these records. This prevents them from being included in the synchronisation.
To use the CRM Synchronisation Reset application
1. Synchronise your current data, prior to upgrading Sage 200 CRM. Do not make any amendments to the Sage 200 data or the Sage 200 CRM data.
This makes sure that your Sage 200 and Sage 200 CRM data match and are up to date.
2. Upgrade Sage 200 and Sage 200 CRM.
The oplock values in Sage 200 will be updated for all tables that have been changed for the new version of Sage 200. Sage 200 CRM is not updated.
207
Sage 200 On Premise
3. Run the CRM Synchronisation Reset utility.
The last stored oplock value in CRM, for each entity that synchronises with Sage 200, is updated.
The Sage 200 oplock values now match the Sage 200 CRM oplock values. To ru the utility: a. Download the following file from the support area of the Sage website:
CRM Synchronisation Reset.exe
.
b. Open the file and click
Next
on the welcome screen.
c. Enter the name of the SQL server instance where the Sage 200 database in installed, or select it from the
Select SQL Server Instance
drop-down list.
d. Click
Refresh
to load the available databases.
e. Enter the user name and password for the SQL Server instance and click
OK
.
f. Enter or select the name of the Sage 200 database and click
Next
.
g. To proceed with the updates to the oplock values, click
Finish
.
4. Synchronise in the new version of Sage 200 CRM.
The synchronisation only updates the schema changes between Sage 200 and Sage 200
CRM. No data is synchronised. This makes this first synchronisation much quicker.
You can now continue to upgrade your installation of Sage 200 CRM. The next synchronisation will only include changes made to the Sage 200 CRM Integration.
208
209
11 | Upgrading Sage 200 CRM
210
Index
A
Activation
Analysis Services
BI admin tool 92, 131, 135, 149
failed to link to database error 102
Application Pool
Application pool identity 160, 197
Sage 200 CRM 160, 174, 195, 197
B
Browsers
211
Business Intelligence
admin tool user permissions 92
backup warehouse 100 change your database 100
report types 98, 106 reports 103, 106
SQL server security settings 90
Index
Sage 200 On Premise
C
Client
CRM
synchronisation reset utility 199
CRM Customisations
component manager 203 database 203
CRM integration
CRM web site
D
E
End User Contact Registration Form 119
External Web Server
F
Firewall Settings
G
Graphical Planner
H
I
IIS
application pool identity 160, 174, 197
Install
212
L
Licence
activation 68 offline activation 68
M
Manufacturing
upgrading from 5.1 146 using BOM 113, 138, 146
Microsoft Office
Microsoft Office 365
O
213
P
Preactor
copyright 118 licence agreement 118
Purchase Order Authorisation
R
Report Designer
Role
Roles
S
Sage 200 CRM
error folder could not be created 161,
integration freezes on save 174
Index
Sage 200 On Premise
Sage 200 services log files 173
set up windows user account 162
synchronisation reset tool 207
Sage 200 Services
sage.co.uk
Scheduled Task
Self Service
install to external website 58
Server
Set Up
Site Licence
SQL Server
SSL Certificates
add using a group policy 56 install on client 56
Support Tool
Sychronisation Reset Utility 199
Synchronisation Reset Tool 199
System Administration
System Adminsitration
214
T
Tablets
Terminal server
Trusted Location
U
Upgrading
Users
W
Windows Identity Foundation 12, 127
Windows User Account
Index
215
216
Descargar
Enlace público actualizado
Se ha actualizado el enlace público a tu chat. Puedes ver y gestionar tus enlaces de chat después del registro aquí.
Enlace público del documento
Anuncio
