June 24, 2013
AVImark Software Support
Address: 5 Sugar Creek Road Piedmont, MO 63957
Support Phone: 877.838.9273 | Support Fax: 573.223.4306
Corporate Phone: 855.838.7638 | Corporate Fax: 573.223.3551
Setting up AVImark
Client Server
Client Server: Explanation and Benefits
As of AVImark version 2008, you now have the option of running AVImark through
Client/Server. This option allows AVImark to access the data files in a more direct way asking for larger sets of information instead of the previous method that had more requests for smaller sets of information causing undue slowness for some clinics because of network traffic generated. It also allows all of the workstations to talk to the AVImark server service which will get the information from the server and with this process it will help eliminate file locking errors. This change is completely optional, but highly recommended if you are experiencing any issues with speed since the benefit is a more responsive AVImark application for the clinic.
Using the Client/Server application can be defined as:
Client- Avimark.exe [program]
Server- AVImarkserver.exe [Application program]
AVImarkGuardian.exe [Service program]
These files will be inactive unless you switch to using Client/Server.
The main change you will notice when using the Client/Server feature is the new
AVImarkGuardian program. The AVImarkGuardian is an executable program that will run in the background on your server to allow AvimarkServer.exe to be run as a Service. It can be set up to start with Windows and can be thought of as a
“controller” to control the
AVImarkServer.exe file.
A new shortcut AVImarkGuardain.exe will need to be created on the Server. In addition to using Client/Server on your local network, you can also connect to AVImark through the internet.
If you run more than one active database and wish both to run Client/Server, you will need to contact Tech Support to set up the second database.
1
Client Server: Making the Switch from AVImark Classic to
Client/Server
1. Open your AVImark folder on the server, locate the file AVImarkGuardian.exe, right- click on it, and click Send to, Desktop (Create Shortcut.)
2. Open the Shortcut to AVImarkGuardian.exe on your desktop, and you will see this window. (if the sever computer is Windows Vista, Windows 7 or Server 2008 right click on the AVImarkGuardian short cut and run as admin.)
3. Click open AVImark server and click Run. (If you get a message from your firewall click allow, if you get a message asking for flat file or sql select flat file click done.)
2
4. Close the AVImark server window and in the AVImark guardian window; choose
Install AVImark as a Hidden Service and click Run. The message at the bottom will change once this is completed to, “AVImark Server is currently running as a service .”
Important Note: If the message at the bottom displays,
“AVImark Server is installed as a service, but is not currently running ,” click Start the Service, and click Run.
5. Click done on the Guardian window.
6. Hold down the F9 key on your keyboard and double left-click on your AVImark
Shortcut and you will get this window. If you have Windows Vista, instead of using
F9, do a right-click Properties on your shortcut to AVImark, at the end of the Target field after the .exe add a space /connect, click Apply, and click Ok. After you have
Client/Server set up, you can then remove the /connect from the properties.
3
7. Click Connect as Client/Server, click Save Changes, and click next. (save changes will make this option global so all your other computers will connect this way without this option checked only this computer will connect this way for this log on only.)
4
8. Check the information to make sure it is correct. a. Name or address of the computer should be the servers full name or the IP address of the server
Important Note: only use the IP address for the address box if the server has a static IP. b. The server password is a password that is created by AVImark for additional security you should not have to change this option unless you changed the
AVImark server password. c. The port number is defaulted to 9191 unless you have changed the AVImark server port you should leave this option blank. d. Use compression should remain unchecked unless you are primarily accessing AVImark through the internet instead of on a local network or if you use wireless on most of your stations.
Important Note: If you use a firewall, you will need to make sure the AVImark server.exe and avimark.exe or excluded from the firewall also the designated port number is unblocked on the firewall. If you need help setting up your firewall click here.
Important Note: Several functions previously located in the utilities menu have been moved and must be accessed though the AVImark Guardian. To access these options: rebuild indexes, backup AVImark files, updated AVImark, sidekick, and apply reminders. You will close AVImark on all computers and the server then double left click on AVImark Guardian and click run. Click utilities and make your selection.
9. E-mail [email protected] letting us know your clinic name, phone number, and that you switched to AVImark Client/Server. This is important because Tech Support is keeping track of our users on Client/Server to enable us to track improvements in speed-related problems and make sure if any Client/Server-specific issues were ever to arise, we would be able to contact you quickly via e-mail.
5
