Hewlett Packard Enterprise 72GB Datasheet
Add to My manualsadvertisement
QuickSpecs
Overview
HP SAS Enterprise and SAS Midline Hard Drives
Serial Attached SCSI (SAS) provides a superior storage solution. With some storage requirements escalating and others becoming more complex, factors such as flexibility, performance, increased reliability, greater density, security, scalability and accessibility are more critical than ever. Today's organizations consist of different kinds of environments. Enterprise data centers must be online 24X7, fulfill requests from numerous users simultaneously, and allow for constant growth and expansion while in operation. Other customer environments require high capacity storage and high data availability for low I/O environments. HP's portfolio of SAS drives meets all these demands.
What's New
HP introduces the first 2.5-inch Midline SAS drives. This drive is an economical small form factor drive for non-mission critical environments, low I/O environments.
HP 500GB 6G SAS 7.2K SFF DP MDL HDD
DA - 12244 Worldwide QuickSpecs — Version 20 — 7.14.2009
Page 1
QuickSpecs
Overview
Models
SAS Hot Plug SFF Enterprise (ENT) Drives
HP 300GB 6G SAS 10K SFF DP ENT HDD
HP 300GB 3G SAS 10K SFF DP ENT HDD
HP 146GB 6G SAS 15K SFF DP ENT HDD
HP 146GB 3G SAS 15K SFF DP ENT HDD
HP 146GB 6G SAS 10K SFF DP ENT HDD
HP 146GB 3G SAS 10K SFF DP ENT HDD
HP 72GB 6G SAS 15K SFF DP ENT HDD
HP 72GB 3G SAS 15K SFF DP ENT HDD
HP 72GB 3G SAS 10K SFF DP ENT HDD
SAS Non-Hot Plug SFF Enterprise (ENT) Drives
HP 300GB 6G SAS 10K SFF DP NHP ENT HDD
HP 146GB 6G SAS 10K SFF DP NHP ENT HDD
HP 72GB 6G SAS 15K SFF DP NHP ENT HDD
SAS Hot Plug 3.5" Enterprise (ENT) Drives
HP 450GB 3G SAS 15K 3.5" DP ENT HDD
HP 400GB 3G SAS 10K 3.5" DP ENT HDD
HP 300GB 3G SAS 15K 3.5" DP ENT HDD
HP 146GB 3G SAS 15K 3.5" DP ENT HDD
HP 72GB 3G SAS 15K 3.5" DP ENT HDD
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
HP 450GB 3G SAS 15K NHP 3.5" DP ENT HDD
HP 400GB 3G SAS 10K NHP 3.5" DP ENT HDD
HP 300GB 3G SAS 15K NHP 3.5" DP ENT HDD
HP 146GB 3G SAS 15K NHP 3.5" DP ENT HDD
SAS Hot Plug SFF Midline (MDL) Drives
HP 500GB 6G SAS 7.2K SFF DP MDL HDD
SAS Hot Plug 3.5" Midline (MDL) Drives
HP 1TB 3G SAS 7.2K 3.5" DP MDL HDD
HP 750GB 3G SAS 7.2K 3.5" DP MDL HDD
HP SAS Enterprise and SAS Midline Hard Drives
454232-B21
459508-B21
416127-B21
384854-B21
384852-B21
454234-B21
508232-B21
417950-B21
417855-B21
507610-B21
461137-B21
461135-B21
507127-B21
492620-B21
512547-B21
504062-B21
507125-B21
418367-B21
512545-B21
418371-B21
384842-B21
537809-B21
537807-B21
537805-B21
DA - 12244 Worldwide QuickSpecs — Version 20 — 7.14.2009
Page 2
QuickSpecs
Standard Features
What is SAS?
HP SAS Enterprise and SAS Midline Hard Drives
Serial Attached SCSI (SAS) is the evolution of the SCSI interface. SAS Enterprise drives satisfy the enterprise data center requirement of scalability, performance, reliability and manageability, while providing an enterprise storage infrastructure for both enterprise SAS drives and SATA disk drives. SAS
Midline drives provide the lowest dollars per gigabyte and economical reliability and performance. The
SAS interface is compatible with SATA devices. This compatibility provides users with unprecedented choices for server and storage subsystem deployment
Drive Quality and
Performance
Performance
Today's distributed enterprise is seeing larger, more complex applications, an increase of mission-critical data moving to the server, increasing demand for transaction processing and critical server consolidation.
In this environment, storage has become a critical component of the information system, significantly defining both the systems reliability and performance. This is why HP drives undergo an intense qualification process that eliminates firmware and O/S incompatibilities. All drive firmware is specific to our drives and is designed to maximize both functionality and compatibility. All drives are proven to perform in the HP systems for which they were designed.
While selecting the drives in our Enterprise portfolio, only those drives whose performance is suitable for an enterprise environment are selected through the HP qualification process and are labeled "best-inclass." All our Enterprise drives are proven to be reliable and tuned for optimum performance in the HP equipment for which they were designed. The drives in our Midline portfolio undergo a similar qualification process to ensure that you get the economical reliability and performance you need for your low workload (less than 40% I/O) environments.
Only those drives whose performance is suitable for an enterprise environment are selected through the
HP qualification process and are labeled "best-in-class." All our drives are proven to be reliable and tuned for optimum performance in the HP equipment for which they were designed.
Pre-Failure Alert
Integration
Support Matrix
When used in conjunction with a SMART Array Controller and Systems Insight Manager, the SMART capable firmware in HP hard drives enables extensive fault prediction capabilities. If potential problems develop in one of the drives, the Smart Array Controller, Systems Insight Manager and/or SMART hard disk drive lets you know in advance so you can have the drive replaced, before it fails, under warranty.
NOTE: All drives are protected by a Pre-Failure Alert when used with a HP Smart Array controller and
Systems Insight Manager, allowing hard drives to be replaced before failure under warranty. In addition, all drives are covered by a one or three-year limited on-site warranty period for the system in which they are installed. The drive warranty is automatically uplifted when used in a server or MSA for which a Care
Pack is purchased. Please see the Support Services section below for additional services.
Many issues customers have with third party drives are "simple" integration issues. When buying from another supplier, there is no guarantee that a drive has been correctly set for proper operation with
ProLiant servers and storage systems. These incompatibilities can create problems in configuration, can rob your system of performance, or at their worst, can cause you to lose data. HP hard drives are specifically designed and tested for flawless operation in your HP equipment. The integration of hard drives in HP systems means that cables, SCSI ID settings, termination, hot plug drive trays and firmware are right for your ProLiant server or storage system.
Please see the following URL for the latest list of supported servers and enclosures: http://www.hpproliantoptions.com/
DA - 12244 Worldwide QuickSpecs — Version 20 — 7.14.2009
Page 3
QuickSpecs
HP SAS Enterprise and SAS Midline Hard Drives
Service and Support, HP Care Pack, and Warranty Information
Support Services Care Pack services provide a range of life cycle support options that let you choose the service levels that meet your business requirements, from basic to mission-critical.
A full range of HP Care Pack hardware and software services are available including:
Installation and start up
Education courses
Extended onsite hardware coverage hours from same business day 13 ours, 5 day to 24 hours, 7 days call window with options including 4-hour response or 6-hour Call-To-Repair.
Comprehensive range of software technical support for Microsoft, Linux, ProLiant Essentials, and
VMWare-based IT solutions helping to deliver high level of application availability. Response times ranging from 30 minutes for critical problems to 2 hours.
System Management, Performance Services and Mission Critical Support Solution
NOTE: For more information on HP Care Pack services, contact any of our worldwide sales offices or resellers or visit our worldwide Web site on the internet at: http://www.hp.com/hps/carepack
NOTE: For more complete information on HP Services offerings, customers and resellers, please visit us at: http://www.hp.com/hps
NOTE: Additional information regarding worldwide limited warranty and technical support is available at: http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html
DA - 12244 Worldwide QuickSpecs — Version 20 — 7.14.2009
Page 4
QuickSpecs
Technical Specifications
HP SAS Enterprise and SAS Midline Hard Drives
SAS Hot Plug SFF Enterprise (ENT) Drives
Application SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work load intensive applications where 24/7 duty cycles are a requirement, such as database applications and high transaction level applications.
Warranty
Transfer rate
SAS Enterprise hard drives have a 3 year limited warranty regardless of the warranty period for the system in which they are installed.
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
HP 300GB 6G SAS 10K
SFF DP ENT HDD
507127-B21
300GB 6G 10K Capacity
Height
Width
Interface
300,000,000,000
0.591 in (15.00 mm)
2.750 in (69.85 mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air
Temperature)
C)
0.20 ms
4.0 ms
7.45 ms
10,000 rpm
512
585,937,500
HP 300GB 3G SAS 10K
SFF DP ENT HDD
492620-B21
300GB 3G 10K Capacity
Height
Width
Interface
300,000,000,000
0.591 in (15.00 mm)
2.750 in (69.85 mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air
Temperature)
C)
0.20 ms
4.0 ms
7.45 ms
10,000 rpm
512
585,937,500
DA - 12244 Worldwide QuickSpecs — Version 20 — 7.14.2009
Page 5
QuickSpecs
Technical Specifications
HP SAS Enterprise and SAS Midline Hard Drives
HP 146GB 6G SAS 15K
SFF DP ENT HDD
512547-B21
146GB 6G 15K Capacity
Height
Width
Interface
146,815,737,856
0.591 in (15.00 mm)
2.750 in (69.85 mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air C)
Temperature)
0.14 ms
2.58 ms
4.85 ms
15,000 rpm
512
286,749,488
HP 146GB 3G SAS
15K SFF DP ENT HDD
504062-B21
146GB 3G 15K Capacity
Height
Width
Interface
146,815,737,856
0.591 in (15.00 mm)
2.750 in (69.85 mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air
Temperature)
C)
0.14 ms
2.58 ms
4.85 ms
15,000 rpm
512
286,749,488
DA - 12244 Worldwide QuickSpecs — Version 20 — 7.14.2009
Page 6
QuickSpecs
HP SAS Enterprise and SAS Midline Hard Drives
Technical Specifications
HP 146GB 6G SAS 10K
SFF DP ENT HDD
507125-B21
146GB 6G 10K Capacity
Height
Width
Interface
146,815,737,856
0.591 in (15.00 mm)
2.750 in (69.85 mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air
Temperature)
C)
0.20 ms
4.0 ms
7.48 ms
10,000 rpm
512
286,749,488
HP 146GB 3G SAS 10K
SFF DP ENT HDD
418367-B21
146GB 3G 10K Capacity
Height
Width
Interface
146,815,737,856
0.591 in (15.00 mm)
2.750 in (69.85 mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air
Temperature)
C)
0.60 ms
4.1 ms
8.0 ms
10,000 rpm
512
286,749,488
DA - 12244 Worldwide QuickSpecs — Version 20 — 7.14.2009
Page 7
QuickSpecs
Technical Specifications
HP 72GB 6G SAS 15K
SFF DP ENT HDD
512545-B21
HP SAS Enterprise and SAS Midline Hard Drives
72GB 6G 15K Capacity
Height
Width
Interface
73,407,865,856
0.591 in (15.00 mm)
2.750 in (69.85 mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air
Temperature)
C)
0.14 ms
2.58 ms
4.85ms
15,000 rpm
512
143,374,738
HP 72GB 3G SAS 15K
SFF DP ENT HDD
418371-B21
72GB 3G 15K Capacity
Height
Width
Interface
73,407,865,856
0.591 in (15.00 mm)
2.750 in (69.85 mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air
Temperature)
C)
0.20 ms
3.0 ms
7.0 ms
15,000 rpm
512
143,374,738
DA - 12244 Worldwide QuickSpecs — Version 20 — 7.14.2009
Page 8
QuickSpecs
Technical Specifications
HP 72GB 3G SAS 10K
SFF DP ENT HDD
384842-B21
HP SAS Enterprise and SAS Midline Hard Drives
72GB 3G 10K Capacity
Height
Width
Interface
73,407,865,856
0.591 in (15.00 mm)
2.750 in (69.85 mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air
Temperature)
C)
0.20 ms
4.0 ms
8.1 ms
10,000 rpm
512
143,374,738
SAS Non-Hot Plug SFF Enterprise (ENT) Drives
Application SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work load intensive applications where 24/7 duty cycles are a requirement, such as database applications and high transaction level applications.
Warranty
Transfer rate
SAS Enterprise hard drives have a 3 year limited warranty regardless of the warranty period for the system in which they are installed.
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
HP 300GB 6G SAS 10K
SFF DP NHP ENT HDD
537809-B21
300GB 6G 10K Capacity
Height
Width
Interface
300,000,000,000
0.591 in (15.00 mm)
2.750 in (69.85 mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air
Temperature)
C)
0.20 ms
4.0 ms
7.45 ms
10,000 rpm
512
585,937,500
DA - 12244 Worldwide QuickSpecs — Version 20 — 7.14.2009
Page 9
QuickSpecs
HP SAS Enterprise and SAS Midline Hard Drives
Technical Specifications
HP 146GB 6G SAS 10K
SFF DP NHP ENT HDD
537807-B21
146GB 6G 10K Capacity
Height
Width
Interface
146,815,737,856
0.591 in (15.00 mm)
2.750 in (69.85 mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air C)
Temperature)
0.20 ms
4.0 ms
7.48 ms
10,000 rpm
512
286,749,488
HP 72GB 6G SAS 15K
SFF DP NHP ENT HDD
537805-B21
72GB 6G 10K Capacity
Height
Width
Interface
73,407,865,8566
0.591 in (15.00 mm)
2.750 in (69.85 mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air
Temperature)
C)
0.14 ms
2.58 ms
4.85 ms
15,000 rpm
512
143,374,738
SAS Hot Plug 3.5" Enterprise (ENT) Drives
Application SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work load intensive applications where 24/7 duty cycles are a requirement, such as database applications and high transaction level applications.
Warranty
Transfer rate
SAS Enterprise hard drives have a 3 year limited warranty regardless of the warranty period for the system in which they are installed.
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
DA - 12244 Worldwide QuickSpecs — Version 20 — 7.14.2009
Page 10
QuickSpecs
HP SAS Enterprise and SAS Midline Hard Drives
Technical Specifications
HP 450GB 3G SAS 15K
3.5" DP ENT HDD
454232-B21
450GB 3G 15K Capacity
Height
Width
Interface
450,098,159,616
1.0 in (25.4mm)
4.0 in (101.6mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air C)
Temperature)
0.44ms
3.6ms
6.6ms
15,000rpm
512
879,097,968
HP 400GB 3G SAS 10K
3.5" DP ENT HDD
459508-B21
400GB 3G 10K Capacity
Height
Width
Interface
400,000,000,000
1.0 in (25.4mm)
4.0 in (101.6mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air
Temperature)
C)
0.35ms
3.9ms
6.8ms
10,000rpm
512
781,250,000
DA - 12244 Worldwide QuickSpecs — Version 20 — 7.14.2009
Page 11
QuickSpecs
HP SAS Enterprise and SAS Midline Hard Drives
Technical Specifications
HP 300GB 3G SAS 15K
3.5" DP ENT HDD
416127-B21
300GB 3G 15K Capacity
Height
Width
Interface
300,000,000,000
1.0 in (25.4mm)
4.0 in (101.6mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air C)
Temperature)
0.57 ms
3.6 ms
11.0 ms
15,000 rpm
512
585,937,500
HP 146GB 3G SAS 15K
3.5" DP ENT HDD
384854-B21
146GB 3G 15K Capacity
Height
Width
Interface
146,815,737,856
1.0 in (25.4mm)
4.0 in (101.6mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air
Temperature)
C)
0.57 ms
3.5 ms
9.0 ms
15,000 rpm
512
286,749,488
DA - 12244 Worldwide QuickSpecs — Version 20 — 7.14.2009
Page 12
QuickSpecs
HP SAS Enterprise and SAS Midline Hard Drives
Technical Specifications
HP 72GB 3G SAS 15K
3.5" DP ENT HDD
384852-B21
72GB 3G 15K Capacity
Height
Width
Interface
73,407,856,856
1.0 in (25.4mm)
4.0 in (101.6mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air C)
Temperature)
0.57 ms
3.5 ms
9.0 ms
15,000 rpm
512
143,374,738
SAS Non-Hot Plug 3.5" Enterprise (ENT) Drives
Application SAS Enterprise drives are intended for servers and storage solutions with mission critical and high work load intensive applications where 24/7 duty cycles are a requirement, such as database applications and high transaction level applications.
Warranty
Transfer rate
SAS Enterprise hard drives have a 3 year limited warranty regardless of the warranty period for the system in which they are installed.
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
HP 450GB 3G SAS 15K
NHP 3.5" DP ENT HDD
454234-B21
450GB 3G 15K Capacity
Height
Width
Interface
450,098,159,616
1.0 in (25.4mm)
4.0 in (101.6mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air
Temperature)
C)
0.44ms
3.6ms
6.6ms
15,000rpm
512
879,097,968
DA - 12244 Worldwide QuickSpecs — Version 20 — 7.14.2009
Page 13
QuickSpecs
HP SAS Enterprise and SAS Midline Hard Drives
Technical Specifications
HP 400GB 3G SAS 10K
NHP 3.5" DP ENT HDD
508232-B21
400GB 3G 10K Capacity
Height
Width
Interface
400,000,000,000
1.0 in (25.4mm)
4.0 in (101.6mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air C)
Temperature)
0.35ms
3.9ms
6.8ms
10,000rpm
512
781,250,000
HP 300GB 3G SAS 15K
NHP 3.5" DP ENT HDD
417950-B21
300GB 3G 15K Capacity
Height
Width
Interface
300,000,000,000
1.0 in (25.4mm)
4.0 in (101.6mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air
Temperature)
C)
0.44ms
3.6ms
8.0ms
15,000rpm
512
585,937,500
DA - 12244 Worldwide QuickSpecs — Version 20 — 7.14.2009
Page 14
QuickSpecs
HP SAS Enterprise and SAS Midline Hard Drives
Technical Specifications
HP 146GB 3G SAS 15K
NHP 3.5" DP ENT HDD
417855-B21
146GB 3G 15K Capacity
Height
Width
Interface
146,815,737,856
1.0 in (25.4mm)
4.0 in (101.6mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air C)
Temperature)
0.2ms
3.4ms
6.43ms
15,000rpm
512
286,749,488
SAS Hot Plug SFF Midline (MDL) Drives
Application SAS Midline drives are intended for servers and storage solutions where high capacities are required.
These drives have moderately-priced reliability and performance for non mission critical, low workload applications, such as disk backup, archival, and reference applications.
Warranty
Transfer rate
500GB 6G SAS 7.2K
2.5in DP MDL HDD
507610-B21
SAS Midline hard drives have a 1 year limited warranty regardless of the warranty period for the system in which they are installed.
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
500GB 6G 7.2K
Capacity
Height
Width
Interface
500,107,862,016
0.591 in (15.00 mm)
2.750 in (69.85 mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air
Temperature)
C)
0.5 ms
8.2ms
17.55 ms
7,200 rpm
512
976,773,168
DA - 12244 Worldwide QuickSpecs — Version 20 — 7.14.2009
Page 15
QuickSpecs
HP SAS Enterprise and SAS Midline Hard Drives
Technical Specifications
SAS Hot Plug 3.5" Midline (MDL) Drives
Application SAS Midline drives are intended for servers and storage solutions where high capacities are required.
These drives have moderately-priced reliability and performance for non mission critical, low workload applications, such as disk backup, archival, and reference applications.
Warranty
Transfer rate
SAS Midline hard drives have a 1 year limited warranty regardless of the warranty period for the system in which they are installed.
The components of a storage subsystem (e.g. the drive, the HBA/controller, firmware, and the server backplane) should operate at the same data transfer rate or the system bandwidth will be negotiated down to an acceptable level for all components.
HP 1TB 3G SAS 7.2K
3.5" DP MDL HDD
461137-B21
1TB 3G 7.2K
Capacity
Height
Width
Interface
1,000,204,886,016
1.0 in (25.4mm)
4.0 in (101.6mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air C)
Temperature)
0.4 ms
7.4 ms
14.3 ms
7,200 rpm
512
1,953,525,168
HP 750GB 3G SAS 7.2K
3.5" DP MDL HDD
461135-B21
750GB 3G 7.2K
Capacity
Height
Width
Interface
750,156,374,016
1.0 in (25.4mm)
4.0 in (101.6mm)
SAS
(Maximum)
Seek Time
(typical reads, including settling)
Single Track
Average
Full-Stroke
Rotational Speed
Physical Configuration Bytes/Sector
Logical Blocks
Operating Temperature 50° to 95° F (10° to 35°
(System Inlet Air
Temperature)
C)
0.4 ms
7.4 ms
14.3 ms
7,200 rpm
512
1,465,149,168
DA - 12244 Worldwide QuickSpecs — Version 20 — 7.14.2009
Page 16
QuickSpecs
HP SAS Enterprise and SAS Midline Hard Drives
Technical Specifications
Environment-friendly
Products and Approach
End-of-life Management Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling and Recycling programs in many geographic areas. For trade-in information, please go to http://www.hp.com/go/green . To recycle your product, please go to: http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide treatment information for each product type for use by treatment facilities. This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green . These instructions may be used by recyclers and other WEEE treatment facilities as well as HP OEM customers who integrate and re-sell HP equipment.
© Copyright 2009 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel
Corporation.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 12244 Worldwide QuickSpecs — Version 20 — 7.14.2009
Page 17
advertisement
Related manuals
advertisement