Tripp Lite SmartOnline 208/120V or 240/120V 6kVA 5.4kW On-Line Double-Conversion UPS, Extended Run, SNMP, Webcard, 6U Rack/Tower, LCD, USB, DB9 Serial Datasheet

SmartOnline 208/120V or 240/120V 6kVA 5.4kW

On-Line Double-Conversion UPS, Extended Run,

SNMP, Webcard, 6U Rack/Tower, LCD, USB, DB9

Serial

MODEL NUMBER: SU6000RT4UTFHW

Highlights

6kVA / 6000VA / 5400W on-line double-conversion UPS; 0.9

power factor

208/120V or 240/120V 60Hz output; Economy mode option

6U Rack/Tower installation;

Hot-swappable power and battery modules

USB, RS232 & EPO ports;

SNMP/WEB and contact-closure card options

Front panel LEDs with detailed

LCD monitoring and control screen

Expandable runtime with optional external battery packs

Hardwire input (3 wire); NEMA

5-15R, 5-15/20R & Hardwire outputs

Description

Tripp Lite SU6000RT4UTFHW 6000VA / 6kVA / 5400 watt on-line, double-conversion UPS system offers

Package Includes

SU6000RT4UHVPM complete power protection for critical server, network and telecommunications equipment in a 6U rack/tower compatible configuration. Full-time active power conditioning provides clean, continuous dual-conversion AC

Hot-swappable UPS Power

Module output free of voltage fluctuations, power interruptions and line noise. Fault-tolerant auto-bypass prevents unexpected service interruptions during UPS overload or internal fault conditions. Detachable back panel PDU

SUPDMB6KHW Detachable

PDU with Maintenance Bypass with manual bypass switch supports hot-swappable UPS power module replacement with no interruption to connected equipment. 4U UPS power module and included 2U low-voltage transformer install in only 6 rack

Switch

SU6000XFMR2U Low voltage spaces total (6U) with a maximum installed depth of only 21.8 in. / 55.3 cm. Maintains full-time sine wave output within 2% of selectable 208/240V and 120V nominal at 60Hz during brownouts as low 100V and overvoltages as transformer

PowerAlert Software CD high as 300V. Expandable runtime is supported with optional BP192V12-3U external battery packs. Battery independent restart ensures automatic UPS power-up without userinteraction after lengthy power outages, even

1 x 6-ft. USB Cable

1 x 6-ft. Serial Cable when batteries are expired and require replacement. Double-conversion operation converts raw input from AC to

DC, then resynthesizes output power back to perfect sine wave AC with enhanced protection from harmonic

4 Post Rackmount Hardware (2 sets) distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types.

Highly efficient operation in optional economy mode significantly reduces BTU heat output and operating energy costs. Network-grade AC surge and noise suppression. Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via built-in RS-232 and USB interfaces. Optional

SNMP/Web and contact-closure communications card accessories available. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Included PowerAlert monitoring software offers detailed site power and UPS updates with support for safe auto-shutdown of connected systems as UPS batteries become depleted. Included software packages include PowerAlert Local, PowerAlert Network

Shutdown Agent and PowerAlert Network Management System for complete support for a wide variety of application types. Supports Emergency Power Off

(EPO) via built-in interface. Front panel LEDs and LCD readout with scroll controls support front-panel visual monitoring of all major UPS for a variety of control options to support advanced UPS settings and configurations. LED / LCD display panel rotates for viewing in rackmount or tower configurations. Hardwire input. Hardwire UPS output, plus 1 L6-30R, 8 5-15/20R and 4 5-15R outlets. External battery packs are field replaceable and hot swappable. $250,000

1 / 6

Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only)

Features

Tripp Lite SU6000RT4UTFHW 6000VA / 6kVA / 5400 watt on-line, double-conversion UPS system in a 6U rack/tower compatible configuration (4U power module plus 2U low-voltage transformer)

Full-time active power conditioning maintains clean, continuous dual-conversion AC output free of voltage fluctuations, power interruptions and line noise

Fault tolerant electronic bypass maintains utility output during a variety of UPS fault conditions

Detachable back panel PDU contains input line cord connection, output receptacles and manual bypass switch to support hot-swappable whole UPS replacement with no interruption to connected equipment

Hardwire input (208/240V L1, L2 + G)

Hardwire high and low voltage output, plus 8 5-15/20R and 4 5-15R 120V outlets

Included rail kit supports 4U 19 inch rackmount installation in 4 post racks

Optional 2POSTRMKITHD supports installation in 2 post 19 inch racks (2 required for SU6000RT4UTFHW)

Optional 2-9USTAND supports upright tower placement (1 required for SU6000RT4UTFHW)

Maximum installed rack depth of only 21.8 in. / 55.3 cm

Maintains full-time sine wave output within 2% of selected 208/240V and 120V nominal at 60Hz in double conversion mode

Corrects brownouts to 156V at full load (100V at 50% load or less)

Corrects overvoltages to 290V at full load (300V at 90% load or less)

Double-conversion operation offers full-time AC to DC, then DC to AC conversion to maintain perfectly regulated sine wave AC output with enhanced protection from harmonic distortion, fast electrical impulses and other hard-to-solve power problems not addressed by other UPS types

High efficiency ECONOMY MODE operation significantly reduces BTU heat output and operating energy costs

Network-grade AC surge and noise suppression

Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via built-in RS-232, USB and optional SNMP card slot interfaces

UPS card slot supports one card-based network interface option (part # SNMPWEBCARD) or dry-contact monitoring accessory (part # RELAYIOCARD)

Optional SNMPWEBCARD offers communications and control via secure remote web and network interfaces

Optional RELAYIOCARD supports six configurable hard contact closure outputs for custom event notification

Optional RELAYIOMINI interface module offers three configurable hard contact closure outputs for custom event notification (requires removal of USB interface module)

HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X

Includes Free PowerAlert monitoring software packages; PowerAlert LOCAL for desktops and small business networks, PowerAlert NSA (Network

Shutdown Agent) for larger networks and PowerAlert NMS (Network Management System) for monitoring up to 250 SNMP-enabled UPS, PDU and other networking devices

Front panel LEDs and LCD readout with scroll controls support front-panel visual monitoring of all major UPS functions with support for a variety of control options to support advanced UPS settings and configurations

LED/LCD display panel rotates for viewing in rackmount or tower configurations

Supports Emergency Power Off (EPO) via built-in interface

Battery independent restart ensures automatic UPS power-up without userinteraction after lengthy power outages, even when batteries areexpired and require replacement

BP192V12-3U external battery packs are field replaceable and hot swappable

Some external battery configurations require the use of Tripp Lite's External Battery Configuration Software (see manual)

$250,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only)

Specifications

2 / 6

OUTPUT

Output Capacity Details

Output Volt Amp Capacity (VA)

Output kVA Capacity (kVA)

Output Watt Capacity (Watts)

Output kW Capacity (kW)

Power Factor

Crest Factor

Nominal Output Voltage(s)

Supported

Supports up to 105% load continuously in double conversion mode, 106 to 125% for 1 minute, 126% to 150% for 30 seconds; Loads over 150% trigger immediate bypass mode operation to support loads directly from mains power;

Double conversion mode is automatically restored as the overload is cleared

6000

6.0

5400

5.4

0.9

3:1

120V; 208V; 240V

Nominal Voltage Details

Frequency Compatibility

Frequency Compatibility Details

Output Voltage Regulation (Line

Mode)

Output Voltage Regulation

(Economy Line Mode)

Output Voltage Regulation (Battery

Mode)

Output Receptacles

This configuration requires the Power Module be set to 208 or 240V output voltage; included step-down transformer supports 120V output (when the voltage-selection switch on the transformer module is set to match the 208 or 240V power module setting)

60 Hz

Output frequency regulation +/- 0.05Hz (free running)

+/- 2%

+/- 10%

+/- 2%

Output Receptacle Details

Output Circuit Breakers

(4) 5-15R; (8) 5-15/20R; (1) L6-30R; Hardwire

Hardwire input and output connections are mounted on a detachable PDU backplate with bypass switch to enable hot-swappable power module replacement

Low voltage 20A breakers on the transformer module protect 4 5-15/20R outlets each; Low voltage 15A breakers protect 2 5-15/20R outlets each

Output AC Waveform (AC Mode) Pure Sine wave

Output AC Waveform (Battery Mode) Pure Sine wave

INPUT

Rated input current (Maximum Load) 31.9A (200V), 30.6A (208V), 29A (220V), 27.7A (230V), 26.6A (240V)

Nominal Input Voltage(s) Supported 208V AC; 240V AC

Nominal Input Voltage Description Factory configured to 208V

UPS Input Connection Type

UPS Input Connection Description

Recommended Electrical Service

Input Phase

Hardwire

3 wire single phase input (L1, L2, G)

40A (200/208v); 30A (220/230/240v)

Single-Phase

3 / 6

BATTERY

Full Load Runtime (min.)

Half Load Runtime (min.)

Expandable Battery Runtime

External Battery Pack Compatibility

DC System Voltage (VDC)

Battery Recharge Rate (Included

Batteries)

Internal UPS Replacement Battery

Cartridge

Battery Access

Battery Replacement Description

Expandable Runtime

2 minutes (5400 watts)

8.5 minutes (2700 watts)

Runtime is expandable with external battery packs

BP192V1037C-1PH; BP192V12-3U; BP192V1407C-1PH; BP192V557C-1PH; BP192V787C-1PH; BP192V5RT2U

(limit 1)

192

6 hours from 10% to 90% (typical, full load discharge)

RBC5-192

Front panel battery access door

Hot-swappable, user replaceable internal batteries

Yes

VOLTAGE REGULATION

Voltage Regulation Description

Overvoltage Correction

Undervoltage Correction

Online, double-conversion power conditioning

Corrects overvoltages as high as 300V (<90% load) and 280V (full load)

Corrects undervoltages as low as 100 (<50% load) and 155V (full load); derates linearly

USER INTERFACE, ALERTS & CONTROLS

Front Panel LCD Display

Selectable LCD display with scroll and selection buttons enables UPS control and detailed monitoring options;

LED/LCD panel rotates for viewing in rack/tower formats (see manual)

Switches

Alarm Cancel Operation

Audible Alarm

Front Panel LCD

LED Indicators

Includes main power off/on switch, plus 2 switches to set and execute scrollable LCD functions. A manual bypass switch featured on the detachable PDU allows for complete removal of the UPS during routine maintenance without disrupting power to connected loads

Alarm cancel switch

Unique audible alarms for all major UPS, environmental and power conditions (see manual)

No

6 LEDs indicate line power, online mode, economy/bypass mode, on-battery, charger and AC output status; LCD screen offers additional information and control options

SURGE / NOISE SUPPRESSION

UPS AC Suppression Response

Time

EMI / RFI AC Noise Suppression

Instantaneous

Yes

PHYSICAL

Included Mounting Accessory

Description

4 post rackmount installation accessories included (2 sets)

4 / 6

Installation Form Factors Supported with Optional Accessories

2 post rackmount (2POSTRMKITHD); Tower (2-9USTAND)

Optional Mounting Accessory Notes 2 sets of 2POSTRMKITHD required for 2 post rackmount installation of separate UPS and transformer components

Primary Form Factor Rackmount

UPS Power Module Dimensions

(hwd, in.)

UPS Power Module Dimensions

(hwd, cm)

Installed Whole System Maximum

Rack Depth (in.)

Installed Whole System Maximum

Rack Depth (cm)

Rack Height (U Spaces)

UPS Power Module Weight (lbs.)

6.85 x 17.5 x 20.7

17.4 x 44.5 x 52.6

21.8

55.4

6

116.2

52.8

UPS Power Module Weight (kg)

Stepdown Transformer Dimensions

(hwd / in.)

Stepdown Transformer Dimensions

(hwd / cm)

3.5 x 17.5 x 21.8

8.8 x 44.5 x 55.4

Stepdown Transformer Weight (lbs.) 72.6

Stepdown Transformer Weight (kg) 33

UPS Shipping Dimensions (hwd / in.) 22.2 x 23.6 x 29.1

UPS Shipping Dimensions (hwd / cm)

56.4 x 59.9 x 73.9

Shipping Weight (lbs.)

Shipping Weight (kg)

Cooling Method

UPS Housing Material

232.1

105.4

Fans

Steel

ENVIRONMENTAL

Operating Temperature Range

Storage Temperature Range

Relative Humidity

AC Mode BTU / Hr. (Full Load)

AC Economy Mode BTU / Hr. (Full

Load)

AC Mode Efficiency Rating (100%

Load)

765

90%

AC Economy Mode Efficiency Rating

(100% Load)

96%

+32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius

+5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius

0 to 95%, non-condensing

1767

5 / 6

Operating Elevation (ft.)

Audible Noise

Operating Elevation (m)

LINE / BATTERY TRANSFER

Transfer Time

Transfer Time (Economy Mode)

Low Voltage Transfer to Battery

Power (Setpoint)

High Voltage Transfer to Battery

Power (Setpoint)

0-3000m (0 to 10,000 ft.)

60 dBA at front side 1 meter

0-3000 m

COMMUNICATIONS

Communications Interface

Network Monitoring Port Description

PowerAlert Software

Communications Cable

WatchDog Compatibility

USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface

Additional contact closure support with optional RELAYIOCARD and RELAYIOMINI interface cards. RELAYIOMINI installation requires removal of panel containing USB ports

Included

USB, DB9 serial and EPO cables included

Yes

No transfer time (0 ms.) in online, double-conversion mode

8ms. typical power failure response in optional economy mode

156V (full load) / 100V (50% load or less, derates linearly)

280V (full load) / 300V (90% load or less)

SPECIAL FEATURES

Cold Start (Startup in Battery Mode

During a Power Failure)

High Availability UPS Features

Green Energy-Saving Features

Cold-start operation supported

Automatic inverter bypass; Manual bypass switch; Detachable hot-swap PDU; Hot swappable UPS power module;

Hot swappable batteries

High efficiency economy mode operation; Support for daily startup and shutoff; Schedulable daily hours of economy mode operation

CERTIFICATIONS

UPS Certifications

UPS Certification Details

Tested to UL1778 (USA); Tested to CSA (Canada); Meets FCC Part 15 Category A (EMI); ROHS (Restriction of

Hazardous Substances)

IEC 61000-4-5 1995 B Surge Immunity

WARRANTY

Product Warranty Period (Worldwide) 2-year limited warranty

Connected Equipment Insurance

(U.S., Canada & Puerto Rico)

$250,000 Ultimate Lifetime Insurance

© 2015 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners. Tripp Lite has a policy of continuous improvement.

Specifications are subject to change without notice. Photos may differ slightly from final products.

6 / 6