ReSound LiNX 3D CIC Quick Guide
Add to my manuals
7 Pages
ReSound LiNX 3D CIC is a discreet hearing aid that fits entirely inside your ear canal. It utilizes advanced technology to improve your hearing in various situations, providing you with a more natural and immersive listening experience.
With its multiple programs and adjustable volume control, you can customize the device to suit your specific hearing needs. The hearing aid also features a sound outlet/wax guard that you can change monthly to ensure optimal sound quality and prevent feedback.
advertisement
Quick guide
ReSound LiNX 3D ™ CIC
My hearing aid information
Product: ReSound LiNX 3D
Model: CIC
Serial number (R):
________________________________
Serial number (L):
________________________________
Battery size: 10A
Programs:
(if set up by your hearing care professional)
PROGRAM WHEN TO USE
1
BEEPS
1
2 2
3 3
4 4
Get to know your hearing aid
A. Program button*
B. Battery door
C. Retrieval line
D. Microphone
E. Volume control*
E
F. Sound outlet/wax guard
G. Manufacturer
H. Serial number
I. Model
GN ReSound
XXXXXXXXXXX
G
D
A
H
B
C
F
*If selected by your hearing care professional
View ReSound hearing aid tutorial videos at youtube.com/resoundus.
I
What you need to know
Getting started: On/Off function
ON: Insert battery & completely close
battery door (B). Program 1 will
be active.
ON
OFF: Open the battery door (B). Use
fingertip to pull it all the way.
OFF
Inserting/Replacing the battery:
1. Open the battery
door (B)
completely by
using your fingertip.
2. Remove protective sticker from
battery and wait 2 minutes before
inserting the
battery into the
hearing aid to
allow full activation of the battery.
3.Insert the new battery
with the positive side
(flat side) in the correct
position, as shown.
4. Gently close the battery door (B).
If it doesn’t close easily, check to
see if the battery is upside down.
Troubleshooting
SYMPTOM CAUSE
No sound Battery door (B) not closed
Dead battery
Battery door (B) will not close
Blocked wax guard (F)
POSSIBLE REMEDY
Turn on by closing the battery door (B)
Replace battery
Insert battery properly
Not loud enough
Blocked sound outlet (F)
Replace wax guard (F) or consult your hearing care professional
Change wax guard (F) or consult your hearing professional
Consult your hearing care professional
Excessive whistling/ feedback
Change in hearing, volume too low
Excessive ear wax
Incorrect placement in ear
Excessive ear wax
If none of the above
Consult your hearing care professional
Re-insert hearing aid carefully
Clean guard (F)/consult your hearing care professional
Consult your hearing care professional
If there are any other problems not mentioned in this guide, please contact
ReSound or your hearing care professional.
Regular care & maintenance
Daily: Clean your hearing aid.
Keep your hearing aids dry. Clean the hearing aids using a soft cloth or tissue.
Monthly: Change the wax guard (F) or see your hearing care professional.
For changing CeruSTOP ™ (white) wax guard (F), complete the following steps:
Removal: Insert the removal side of the wax guard tool into the used wax guard (C) so that the shaft of the tool is touching the rim of the wax guard.
Slowly pull the wax guard straight out.
removal side
Wax guard tool replacement side
Insertion: To insert the new wax guard (C), gently press the replacement side of the wax guard tool straight into the hole of the sound outlet until the outer ring lies flush with the outside of the receiver. Pull the tool straight out. The new wax guard will remain in place.
For changing HF3 wax guard (F), complete the following steps:
1. Brush the sound
outlet area with
the sound outlet
pointed down.
2. Insert the threaded end of the
wax guard tool into the used wax
guard, (F) and rotate clockwise.
3. Gently pull until
the used guard
is removed.
4. Discard
the used
guard in
the slot
located
in the wax guard kit by pressing it
into the center, sliding it to one end
of the slot, and pull until the filter is
discarded.
5. Flip the wax guard
tool around, locate a
new guard in the dial,
and press the tip of
the tool into the
center of the dial.
6. Gently pull the new
guard out of the dial.
7. Press the new guard to the canal
tip of the hearing aid. Move the
tool gently side to side and pull it
away from the hearing aid.
For more information
Refer to the user guide included in your hearing aid box.
Your hearing care professional can be reached at:
View ReSound hearing aid tutorial videos at youtube.com/resoundus.
Manufacturer according to FDA:
ReSound North America
8001 E. Bloomington Freeway
Bloomington, MN 55420
1.888.735.4327 resound.com
Manufacturer according to Health Canada:
ReSound Canada
303 Supertest Road
Toronto, Ontario M3J 2M4
1.888.737.6863 resound.com
ReSound Government Services
8001 E. Bloomington Freeway
Bloomington, MN 55420
1.800.392.9932 www.resound.com/veterans
400705011 Rev A 2017.02
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement