Peerless ACC558 Datasheet
Add to my manuals
1 Pages
Peerless ACC558 is a versatile I-Beam Clamp designed to securely anchor Peerless ceiling mounts to overhead I-beams. With its adjustable clamping interface and scratch-resistant finish, it offers a stable and durable solution for various applications. The 4” or 5” adjustment range allows for flexible positioning, while the 1 1/2-11.5 NPS threaded fitting ensures compatibility with Peerless Extension Columns. Its sturdy construction and UL listing guarantee reliable performance.
advertisement
Models: ACC558, ACC559
I-Beam Clamps
Model #
ACC558
ACC559
Weight
4.4 lb
(2 kg)
4.8 lb
(2.2 kg)
*Shipping
Weight
**Maximum
Load
4.8 lb
(2.2 kg)
5.3 lb
(2.4 kg)
250 lb
(113 kg)
250 lb
(113 kg)
MIN
4”
(101 mm)
7”
(128 mm)
A
MAX
8”
(128 mm)
12”
(304 mm)
MIN
.25”
(6 mm)
.25”
(6 mm)
B
*Shipping weight based on single unit shipment. Per unit shipping weight may be less for bulk orders.
**Combined weight of all attached hardware and components.
MAX
1”
(25 mm)
1”
(25 mm)
The I-Beam Clamp is designed to anchor a Peerless ceiling mount to an overhead I-beam. Two sizes are available, with a 4” (102 mm) or 5” (127 mm) adjustment range. The 1 1/2-11.5 NPS threaded fitting is compatible with Peerless Extension Columns (several models available, both fixed length and adjustable).
•
•
Features:
Adjustable Clamping I-beam interface
Scratch-resistant black fused epoxy finish
Important:
Architect or installer must verify that the I-beam will safely support the combined load of all attached hardware and components.
ISOMETRIC VIEW
I-BEAM CROSS-SECTION
B
A
SIDE VIEW
R
This product must be installed by a qualified, professional installer.
A R C H I T E C T S S P E C I F I C A T I O N S
The I-beam Clamp shall be a Peerless model ________ and shall be mounted where indicated on the plans. It shall feature a 4” (102 mm) or
5” (127 mm) adjustment range and a clamping I-beam interface. It shall be constructed primarily of 14 gage cold rolled steel and finished in black fused epoxy. It shall be UL listed. Assembly and installation shall be done according to the instructions provided by the manufacturer.
T E C H N I C A L D A T A S H E E T
I-Beam Clamps
Peerless Industries, Inc. 3215 W. North Ave. Melrose Park, IL 60160
708-865-8870 800-865-2112 Fax 708-865-2941 www.peerlessindustries.com
Sheet No. 128-9518-1 Issued: 8-20-03 page 1 of 1
© 2003 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement