Kongsberg cNODE MiniS
Information letter – Procedures for external connections
Connecting the cNODE battery charger
It is very important to read the procedures before connecting the cNODE battery charger to the cNODE MiniS.
Prerequisites
Note
Always connect the cNODE battery charger to the cNODE MiniS before connecting the cNODE battery charger to the mains (110 or 220 Vac).
Disconnecting the cNODE battery charger
It is very important to read the procedures before disconnecting the cNODE battery charger from the cNODE MiniS.
Prerequisites
Note
Always disconnect the cNODE battery charger from the mains (110 or 220 Vac) before disconnecting the cNODE battery charger from the cNODE MiniS.
Context
Context
Procedure
1 Connect the cNODE MiniS to the cNODE battery charger.
2 Connect the cNODE battery charger to mains (110 or 220 Vac).
Procedure
1 Disconnect the cNODE battery charger from mains (110 or 220 Vac).
2 Disconnect the cNODE MiniS from the cNODE battery charger.
410489 / A / 2016–02–19
Connecting cNODE MiniS to the
ROV
It is very important to read the procedures before connecting the cNODE MiniS to the ROV.
Prerequisites
Note
Always connect the cNODE MiniS to the ROV before turning on the power supply (24 Vdc).
Disconnecting cNODE MiniS from the ROV
It is very important to read the procedures before disconnecting the cNODE MiniS from the ROV.
Prerequisites
Note
Always turn off the power supply (24 Vdc) before disconnecting the cNODE MiniS from the ROV.
Procedure
1 Connect the cable between the cNODE
MiniS and the ROV.
2 Turn on the power supply (24 Vdc) to the cNODE MiniS.
Procedure
1 Turn off the power supply (24 Vdc) to the cNODE MiniS.
2 Disconnect the cable between cNODE
MiniS and the ROV.
410489 / A / 2016–02–19
