ABUS Security-Center
MK4200
Opening detector for steel doors
The robust aluminium opening detector for steel doors is a magnetic contact for protecting large (garage) doors. Unauthorised opening is detected and reported to the alarm centre.
This opening detector is ideal for fitting to steel and metal doors. Its special construction enables its use on these materials.
The detector consists of a magnetic contact (reed) and a magnet.
These are fitted parallel to each other. The electric circuit of this NC opening detector is closed in normal state (NC). If the distance between the reed and the magnet increases, the circuit is broken and an alarm reported. Its extremently robust aluminium housing protects it from damage when driven on. The door opening detector for steel doors is VdS certified.
Product highlights:
• For mounting on all kinds of materials, including steel
• Simple installation
• High switching range
• Robust aluminium housing
© 2012 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.
ABUS Security-Center
MK4200
Opening detector for steel doors
Technical Data
Sensing distance to metal 14 mm
Sensing distance to 21 mm non-metal
Protection type
Casing cable
Switching power max.
Ambient operating temperature
IP65
Aluminium (pressure-cast)
1.2m double-insulated 4x0.14 mm2
20VDC, 1A, 10W
-25°C to +55°C
VdS certification
Dimensions in mm
Class B: G191590
19x80x18
© 2012 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.
