How to Calculate Dimensional Weight
MEASURING OVERLAPPING EDGES
Measure to the nearest inch.
Use the greatest measurement in each direction.
For example: Measure A x B x H, not C x D x H
MEASURING CYLINDERS
Calculate the volume using the diameter as
the length and the width.
For example: Measure D x D x H
The box has the same dimensional weight as
the cylinder.
MEASURING IRREGULAR SHAPES
Place the package in a corner in the position
it will be loaded. Measure by holding a
straight edge at the right angles to the wall.
For example: Measure L x W x H
TO CALCULATE VOLUME (EXAMPLES OF CALCULATION)
A shipment weighs 4 lbs
It measures 14 in x 16 in x 16 in = 3584 cubic inches
115
= 31.16 lbs
Rounded to 31 lbs, billable weight is 6lbs (31-25 lbs grace)
Weight surcharge is $0.36 ($0.06 x 6 lbs)
The formula for calculating the dimensional weight for all commodities is 115 cubic inches per pound.
Multiply the length, by the width, by the height to obtain the cubic inches.
If the dimensional weight is greater than the actual weight, use it to calculate the transportation charges.
">
