Calculated Industries 4018 Measure Master 5 User Guide

Calculated Industries Measure Master 4018 is a versatile tool that simplifies complex calculations involving feet, inches, fractions, yards, and metric units. It offers quick solutions for dimensional problems, conversions, area and volume calculations, circle/arc computations, material quantity estimations, and more. With its user-friendly interface and dedicated keys for various functions, the Measure Master 4018 streamlines your work and saves you time by minimizing errors.

PDF

Dokument

Reklama

EASURE

ASTER

™ 5

FEET-INCH-FRACTION and METRIC CALCULATOR

Model 4018 v3.1

M

EASURE

M

ASTER

™

5

v 3.1

The Measure Master 5 calculator helps you measure and estimate like a pro while saving you time by cutting costly errors.

Quickly Solve:

• Feet-Inches-Fractions, Yards, and

Metric Dimensional Problems

• Feet-Inches-Fractions, Yards, and

Metric Conversions

• Problems Involving All Fractions –

1/2-1/64ths!

• Instant Areas, Volumes and Weights

• Circle/Arc Calculations

• Material Quantity (e.g., Concrete,

Flooring)

• Squaring-up, and more

KEY DEFINITIONS..................................1

Basic Function Keys ............................1

Unit Keys .............................................2

Circle/Arc Keys ....................................4

Miscellaneous Functions .....................4

Paperless Tape Example .....................7

Preference Settings .............................8

EXAMPLES ...........................................10

Adding and Subtracting Strings of

Dimensions ....................................10

Multiplying Dimensions ......................10

Dividing Dimensions ..........................11

Percent Calculations ..........................11

Square Area.......................................12

Square Root.......................................12

Rectangular Volume ..........................13

Entering Square and Cubic and

Adding a Waste Allowance ............13

Linear Conversions............................14

Square and Cubic Conversions.........15

Weight Conversions...........................16

Weight per Volume ............................16

Using the Memory .............................17

Using the Memory—Finding Quantity of Carpet Required ........................19

Board Feet and Cost .........................20

Circle Area and Circumference..........20

Arc Properties ....................................21

Concrete Volume for Driveway ..........22

Squaring-up a Foundation .................22

APPENDIX ...........................................23

Setting Fractional Resolution.............23

Default Settings .................................24

Auto-Shut Off .....................................25

Accuracy/Errors .................................25

Battery ...............................................26

Replacing the Battery ........................27

Reset ................................................27

AREA AND VOLUME FORMULAS ......28

Area Formulas ...................................28

Volume Formulas...............................29

REPAIR AND RETURN.........................30

Warranty, Repair and Return

Information.....................................30

WARRANTY ..........................................31

FCC CLASS B ......................................33

LOOKING FOR NEW IDEAS................33

KEY DEFINITIONS

Basic Function Keys

+ – x

÷ =

0 – 9 and •

Arithmetic operation keys.

Keys used for entering numbers.

Percent Key — Four-function (+, –, x, ÷) percent key.

O o

Off Key — Turns all power off, clearing all non-permanent registers.

On/Clear Key — Turns on power. Pressing once clears the display. Pressing twice clears all temporary values.

Ç Convert Key — Used with the dimensional keys to convert between dimensions or with other keys to access special functions.

ß Store Key — Used for storing values.

® Recall Key — Used for recalling stored values.

OCKET

EFERENCE

UIDE

— 1

Unit Keys y f i

Yards Key — Enters or converts to Yards.

Feet Key — Enters or converts to Feet as whole or decimal numbers. Also used with the i and / keys for entering Feet-Inch values (e.g., 6 f 9 i

1 / 2 ). Repeated presses during conversions toggle between Fractional and

Decimal Feet.

Inch Key — Enters or converts to Inches. Entry can be whole or decimal numbers. Also used with the / key for entering fractional inch values (e.g.,

9 i 1 / 2 ).

Repeated presses during conversions toggle between Fractional and

Decimal Inches.

Fraction Bar Key — Used to enter Fractions. Fractions can be entered as proper

OCKET

EFERENCE

UIDE

— 2

(1/2, 1/8, 1/16) or improper

(3/2, 9/8). If the denominator (bottom) is not entered, the calculator's fractional accuracy setting is automatically used.

Meters Key — Enters or converts to Meters.

Ç 2

Centimeters Key — Enters or converts to Centimeters.

Millimeters Key — Enters or converts to Millimeters.

Acres — Enters or converts

(a square value) to Acres.

b Board Feet Key — Enters or converts Cubic values to

Board Feet. One Board Foot is equal to 144 Cubic Inches.

Ç 1

Ç 3

Ç 4

Kilograms — Enters or converts to Kilograms.

Metric Tons — Enters or converts to Metric Tons.

Pounds — Enters or converts to Pounds.

Ç 6 Tons — Enters or converts to Tons.

OCKET

EFERENCE

UIDE

— 3

Circle/Arc Keys

C a

Ç a

Circle Key – Calculates

Circle Area and

Circumference based on entered Diameter.

Arc Key — Calculates Arc

Length or Degree, Chord

Length, Segment Area, Pie

Slice Area and Segment

Rise based on entered

Diameter/Radius and Arc

Degree or Length (i.e., if

Arc Degree is entered, it will calculate Arc Length, and vice versa).

Radius — Enters or calculates the circle radius.

Miscellaneous Functions

Ç B

Ç ÷

(

Backspace key

) Square Root

(1/x) Reciprocal — Finds the reciprocal of a number

(e.g., 8 Ç ÷ 0.125).

OCKET

EFERENCE

UIDE

— 4

Ç x

Ç –

Ç +

Ç %

Ç ß

ß 0

Clear All — Returns all stored values to the default settings (does not affect

Preference Settings).

(+/–) Toggle

Pi (

) 3.141593

x 2 — Squares the value in the display.

Preference Settings

Weight per Volume —

Stores a new Weight per

Volume value as listed below:

Note: After entering a value and pressing ß 0 , continue pressing the 0 digit key until you’ve reached the desired

Weight per Volume format. To recall your setting, press ® 0 .

• Ton Per CU YD

• LB Per CU YD

• LB Per CU FEET

• MET Ton Per CU M

• kG Per CU M

This value is stored until you change it or perform a Clear

All ( Ç x ).

OCKET

EFERENCE

UIDE

— 5

Ç 0

Ç •

Ç µ

® ®

ß 1

ß 2

ß 3

® µ ,

1 , 2 or 3

® =

Total Cost (based on entry of per unit cost)

Converts between D:M:S and Decimal Degrees.

(M+) Memory +

(M–) Memory –

Recall and Clear M+

(M1) Storage Register

(M2) Storage Register

(M3) Storage Register

Recall M+, M1, M2 or M3

Paperless Tape – Useful for checking figures, as it scrolls through your past

20 entries or calculations.

Press ® = to access

Paperless Tape mode.

Press + or – to scroll forward or backward. Press

= to exit mode and continue with a new entry or calculation.

OCKET

EFERENCE

UIDE

— 6

Paperless Tape Example

Add 6 Feet, 5 Feet, and 4 Feet, then access the paperless tape mode and scroll back through your entries. Then, back up one entry, exit the tape mode and add 10 Feet to the total.

KEYSTROKE o o

6 f +

5 f +

4 f =

® =

–

+ 1 0 f =

DISPLAY

FEET

INCH

FEET

INCH

FEET

INCH

TTL= 15

FEET

INCH

01 6

FEET

INCH

02 + 5

FEET

INCH

03 + 4

FEET

INCH

02 + 5

FEET

INCH

TTL= 15

FEET

INCH

FEET

INCH

OCKET

EFERENCE

UIDE

— 7

Preference Settings

Press Ç , then ß , then keep pressing

ß to toggle through the main settings.

Press the + key to advance within subsetting. Use the – key to back up. Press the o key to exit Preferences.

PRESS

Ç AND: SETTING--FUNCTION

First press Fractional Resolution: of ß :

--1/16

--1/32

--1/64

--1/2

--1/4

--1/8

--1/16 (repeats options)

Second press Area Displays: of ß :

--Std.

--0.

SQ FEET

SQ YD

SQ M

--Std. (repeats options)

Third press Volume Displays: of ß :

--Std.

--0.

CU YD

CU FEET

CU M

--Std. (repeats options)

OCKET

EFERENCE

UIDE

— 8

Fourth press Exponential Mode: of ß :

--OFF

--On

--OFF (repeats options)

Fifth press Meter Linear Displays: of ß :

--0.000

--FLOAt

--0.000

(floating point)

(repeats options)

Sixth press Decimal Degree Displays: of ß :

--0.00°

--FLOAt

--0.00°

(floating point)

(repeats options)

Seventh press Fractional Mode: of ß :

--Std.

--COnSt

--Std. (repeats options)

OCKET

EFERENCE

UIDE

— 9

EXAMPLES

Adding and Subtracting Strings of

Dimensions

Add the following measurements:

• 6 Feet 2-1/2 Inches

• 11 Feet 5-1/4 Inches

• 18.25 Inches

Then subtract 2-1/8 Inches.

KEYSTROKE DISPLAY o o

6 f 2 i 1 / 2 +

FEET

2-1/2

INCH

1 1 f 5 i 1 / 4 +

FEET

7-3/4

INCH

1 8 • 2 5 i = 19

FEET

INCH

– 2 i 1 / 8 = 18

FEET

11-7/8

INCH

Multiplying Dimensions

What is the perimeter of a room with three walls which measure 15 Feet 3-3/4

Inches each?

KEYSTROKE DISPLAY

3 x 1 5 f 3 i 3 / 4 =

FEET

11-1/4

INCH

OCKET

EFERENCE

UIDE

— 10

Multiply 5 Feet 3 Inches by 11 Feet 6-1/2

Inches:

KEYSTROKE DISPLAY

5 f 3 i x 1 1 f

6 i 1 / 2 = 60.59375

SQ FEET

Dividing Dimensions

Divide 15 Feet 3-3/4 Inches into thirds

(divide by 3):

KEYSTROKE DISPLAY o o

1 5 f 3 i 3 / 4 ÷ 3 =

FEET

1-1/4

INCH

How many 3’6” pieces can you cut from one 25-ft. board?

KEYSTROKE DISPLAY o o 0.

2 5 f ÷ 3 f 6 i = 7.142857

(or 7 whole pieces)

Percent Calculations

Add a 10% waste allowance to 2.78 Cubic

Yards.

KEYSTROKE DISPLAY o o

2 • 7 8 y y y + 1 0 %

3.058

CU YD

OCKET

EFERENCE

UIDE

— 11

What is 25% of $1,575?

KEYSTROKE o o

1 5 7 5 x 2 5 %

Square Area

DISPLAY

393.75

Find the area of a square room with sides measuring 15 Feet 8-1/2 Inches.

KEYSTROKE DISPLAY o o

1 5 f 8 i 1 / 2

FEET

8-1/2

INCH

Ç % (x 2 ) 246.7517

SQ FEET

Square Root

What is the Square Root of 200?

KEYSTROKE o o

2 0 0 Ç B ( )

DISPLAY

14.14214

OCKET

EFERENCE

UIDE

— 12

Rectangular Volume

Find the volume:

• Length: 20 Feet 6-1/2 Inches

• Width: 12 Feet 8-1/2 Inches

• Height: 10 Inches

KEYSTROKE DISPLAY o o

2 0 f 6 i 1 / 2 x

FEET

6-1/2

INCH

1 2 f 8 i 1 / 2 x

261.0503

SQ FEET

1 0 i = 8.057109

CU YD

Entering Square and Cubic and Adding a Waste Allowance

Add a 10% waste allowance to 55 Square

Feet. Then add a 20% waste allowance to 150 Cubic Feet:

KEYSTROKE DISPLAY o o 0.

5 5 f f + 1 0 % 60.5

SQ FEET

1 5 0 f f f + 2 0 %

180.

CU FEET

OCKET

EFERENCE

UIDE

— 13

Linear Conversions

Convert 10 Feet 6 Inches to other dimensions, including Metric:

KEYSTROKE DISPLAY o o

1 0 f 6 i

Ç y

Ç i

Ç m

Ç c

Ç M

FEET

INCH

3.5

126

INCH

3.200

320.04

3200.4

Convert 14 Feet 7-1/2 Inches to Decimal

Feet:

KEYSTROKE DISPLAY o o

1 4 f 7 i 1 / 2

FEET

7-1/2

INCH

Ç f 14.625

FEET

Convert 22.75 Feet to Feet-Inches:

KEYSTROKE o o

2 2 • 7 5 f

Ç f

DISPLAY

22.75

FEET

INCH

OCKET

EFERENCE

UIDE

— 14

Square and Cubic Conversions

Convert 14 Square Feet to Square Yards:

KEYSTROKE o o

1 4 f f

Ç y

DISPLAY

SQ FEET

1.555556

SQ YD

Convert 25 Square Yards to Square Feet:

KEYSTROKE o o

2 5 y y

Ç f

DISPLAY

SQ YD

225.

SQ FEET

Convert 12 Cubic Feet to Cubic Yards:

KEYSTROKE o o

1 2 f f f

Ç y

DISPLAY

CU FEET

0.444444

CU YD

OCKET

EFERENCE

UIDE

— 15

Weight Conversions

Convert 150 Pounds to other weights

(Tons, Metric Tons, Kilograms):

KEYSTROKE o o

1 5 0 Ç 4 (lbs)

Ç 6 (tons)

Ç 3 (met tons)

Ç 1 (kg)

0.068039

DISPLAY

150

0.075

68.03886

Ton

MET Ton kG

Weight per Volume

Convert 20 Cubic Yards of concrete to

Pounds, Tons, Metric Tons and Kilograms, if concrete weighs 1.5 Tons per Cubic

Yard (default value):

DISPLAY KEYSTROKE o o

2 0 y y y

Ç 4 (lbs)

Ç 6 (tons)

Ç 3 (met tons)

Ç 1 (kg)

60000.

27.21554

30.

CU YD

Ton

MET Ton

27215.54 kG

OCKET

EFERENCE

UIDE

— 16

Now convert again, if concrete weighs

2 Tons per Cubic Yard (store new Weight per Volume value):

KEYSTROKE

2 ß 0

2 0 y y y

Ç 4 (lbs)

Ç 6 (tons)

Ç 3 (met tons)

Ç 1 (kg)

Ç x

DISPLAY

STORED

Ton Per CU YD

CU YD

80000.

40.

Ton

36.28739

MET Ton

36287.39 kG

ALL CLEArEd

(Clear stored Wt/Vol)

Using the Memory

Whenever the µ key is pressed, the displayed value will be added to the

Memory. Other Memory functions:

FUNCTION KEYSTROKES

Add to Memory µ

Subtract from Memory Ç µ

Recall total in Memory ® µ

Display/Clear Memory ® ®

Clear Memory Ç ®

(Cont’d)

OCKET

EFERENCE

UIDE

— 17

(Cont’d)

Memory is semi-permanent, clearing only when you:

1) turn off the calculator;

2) press ® ® ;

3) press Ç ® ;

4) press Ç x (Clear All).

When Memory is recalled ( ® µ ), consecutive presses of µ will display the calculated average and total count of the accumulated values.

Example:

KEYSTROKE

3 5 5 µ

2 5 5 µ

7 4 5 Ç µ (M-)

® µ TTL

® ®

DISPLAY

STORED

M+ 355.

M+ 255.

M- 745.

– 135.

AVG – 45. M

CNT 3. M

M+ – 135.

OCKET

EFERENCE

UIDE

— 18

Using the Memory — Finding Quantity of Carpet Required

--Room 1: 12’ 4” x 15’

--Room 2: 14’ 8” x 16’

--Add 10% waste allowance

KEYSTROKE DISPLAY o o

1 2 f 4 i x 1 5 f =

1 4 f 8 i x 1 6 f = µ

M+ 185.

FEET

185.

SQ FEET

FEET

INCH

M+ 234.6667

SQ FEET

INCH

SQ FEET

® ®

Ç y

+ 1 0 %

M+ 419.6667

SQ FEET

46.62963

51.29259

SQ YD

OCKET

EFERENCE

UIDE

— 19

Board Feet and Cost

Find the total Board Feet for the following boards: 2 x 4 x 16, 2 x 10 x 18, and

2 x 12 x 20. What is the total cost at

$275 per MBM*?

*Per thousand Board Foot measure.

KEYSTROKE DISPLAY o o

2 x 4 x 1 6 b µ

BDFT 10.66667

2 x 1 0 x 1 8 b µ

BDFT 30.

2 x 1 2 x 2 0 b µ

BDFT 40.

® ® x 2 7 5 Ç 0 (Cost)

BDFT 80.66667

$ 22.

Circle Area and Circumference

Find the area and circumference of a circle with a diameter of 25 Inches:

KEYSTROKE o o

2 5 i C

DISPLAY

DIA 25

INCH

AREA 490.8739

SQ INCH

CIRC 78-9/16

INCH

OCKET

EFERENCE

UIDE

— 20

Arc Properties

Find Arc properties given a 5-foot diameter and an Arc length of 3 Feet 3 Inches:

KEYSTROKE DISPLAY

1. Enter Circle diameter and Arc length: o o

5 f C

DIA 5

FEET

INCH

3 f 3 i a ARC 3

FEET

INCH

2. Find Degree of Arc, Chord Length,

Segment Area, Pie Slice Area and

Segment Rise: a a a a a

CORD 3

FEET

RISE 0

ARC 74.48°

SEG 1.051381

PIE 4.0625

FEET

0-5/16

SQ FEET

6-1/8

INCH

OCKET

EFERENCE

UIDE

— 21

Concrete Volume for Driveway

Calculate the Cubic Yards of concrete required to pour a driveway that measures:

45 Feet 5 Inches long x 13 Feet 6 Inches wide x 5 Inches deep. If concrete is $65 per Cubic Yard, what will it cost?

KEYSTROKE o o

4 5 f 5 i x 1 3 f 6 i x 5 i = x 6 5 Ç 0 (Cost)

DISPLAY

FEET

INCH

FEET

INCH

9.461806

CU YD

$ 615.

(total cost)

Squaring-up a Foundation

Square-up a 10’ x 20’ foundation:

KEYSTROKE DISPLAY o o

1 0 f Ç % (x 2 ) 100.

SQ FEET

+ 2 0 f Ç % (x 2 )

= Ç B ( ) 22

FEET

400.

SQ FEET

4-5/16

INCH

OCKET

EFERENCE

UIDE

— 22

APPENDIX

Setting Fractional Resolution

Fractional resolution is pemanently set via the Preference Settings (see Preference

Settings section for instructions). To select other formats temporarily (e.g., 1/64ths,

1/32nds, etc.), see the example below:

Add 44/64th to 1/64th of an Inch and then convert the answer to other fractional resolutions:

KEYSTROKE DISPLAY o o

4 4 / 6 4

+ 1 / 6 4 =

Ç 1 (1/16)

Ç 2 (1/2)

Ç 3 (1/32)

Ç 4 (1/4)

Ç 6 (1/64)

Ç 8 (1/8) o o

0-44/64

0-45/64

0-11/16

0-1/2

0-23/32

0-3/4

0-45/64

0-3/4

INCH

Note: Changing the Fractional Resolution on a displayed value does not alter your Permanent

Fractional Resolution Setting. Pressing o will return your calculator to the permanently set

Fractional Resolution.

OCKET

EFERENCE

UIDE

— 23

Default Settings

After a Clear All ( Ç x ), your calculator will return to the following setting:

STORED VALUE

Weight per Volume

DEFAULT VALUE

1.5

Ton Per CU YD

If you replace your batteries or perform a

Full Reset* (press O , hold down x , and press o ), your calculator will return to the following settings (in addition to that listed above):

PREFERENCE SETTINGS

Fractional Resolution

Area Display

Volume Display

Exponent

Meter Linear Display

Decimal Degree Display

Fractional Mode

DEFAULT VALUE

1/16

Standard

Off

0.000

0.00°

Standard

*Depressing the Reset button, located toward the lower right-hand corner of the back of the calculator, will also perform a Full Reset.

OCKET

EFERENCE

UIDE

— 24

Auto-Shut Off

Your calculator will shut itself off after about 8-12 minutes of non-use.

Accuracy/Errors

Accuracy/Display Capacity — Your calculator has a twelve-digit display made up of eight digits (normal display) and four fractional digits. You may enter or calculate values up to 19,999,999.99. Each calculation is carried out internally to twelve digits.

Errors — When an incorrect entry is made, or the answer is beyond the range of the calculator, it will display the word

“ERROR.” To clear an error condition you must hit the o button once. At this point, you must determine what caused the error and re-key the problem.

Error Codes:

DISPLAY ERROR TYPE

OFLO Overflow (too large)

MATH Error Divide by 0

DIM Error

ENT Error

Dimension error

Entry error

OCKET

EFERENCE

UIDE

— 25

(Cont’d)

Auto-Range — If an “overflow” is created because of an input and calculation with small units that are out of the standard seven-digit range of the display, the answer will be automatically expressed in the next larger units (instead of showing

“ERROR”) — e.g., 20,000,000 mm is shown as 20,000 m. Also applies to inches, feet and yards.

Battery

This model uses one (1) CR2032 battery

(included).

Should your calculator display become very dim or erratic, replace the battery.

Note: Please use caution when disposing of your old battery, as it contains hazardous chemicals.

Replacement batteries are available at most discount or electronics stores. You may also call Calculated Industries at

1-775-885-4900.

OCKET

EFERENCE

UIDE

— 26

Replacing the Battery

1) Hold calculator upright with back of calculator toward you.

2) Lift battery holder out.

3) Remove old battery.

4) Place new battery with positive side against the bottom of the holder.

5) Insert holder into calculator with positive side of battery facing back of calculator.

Reset

If your calculator should ever “lock up,” press Reset — a small hole located toward the lower right-hand corner of the back of the calculator — to perform a total reset.

OCKET

EFERENCE

UIDE

— 27

AREA AND VOLUME FORMULAS

Area Formulas

OCKET

EFERENCE

UIDE

— 28

Volume Formulas

OCKET

EFERENCE

UIDE

— 29

REPAIR AND RETURN

Warranty, Repair and Return Information

Return Guidelines:

Please read the Warranty in this

User's Guide to determine if your

Calculated Industries product remains under warranty before calling or returning any device for evaluation or repairs.

If your product won't turn on, check the battery as outlined in the User's

Guide.

If you need more assistance, please go to the website listed below.

If you believe you need to return your product, please call a Calculated

Industries representative between the hours of 8:00am and 4:00pm Pacific

Time for additional information and a

Return Merchandise Authorization

(RMA).

Call Toll Free: 1-800-854-8075

Outside USA: 1-775-885-4900 www.calculated.com/warranty

OCKET

EFERENCE

UIDE

— 30

WARRANTY

Warranty Repair Service – U.S.A.

Calculated Industries (“CI”) warrants this product against defects in materials and workmanship for a period of one (1) year from the date of original consumer purchase in the U.S. If a defect exists during the warranty period, CI, at its option, will either repair (using new or remanufactured parts) or replace (with a new or remanufactured calculator) the product at no charge.

THE WARRANTY WILL NOT APPLY TO THE PROD-

UCT IF IT HAS BEEN DAMAGED BY MISUSE, ALTER-

ATION, ACCIDENT, IMPROPER HANDLING OR

OPERATION, OR IF UNAUTHORIZED REPAIRS ARE

ATTEMPTED OR MADE. SOME EXAMPLES OF DAM-

AGES NOT COVERED BY WARRANTY INCLUDE,

BUT ARE NOT LIMITED TO, BATTERY LEAKAGE,

BENDING, A “BLACK INK SPOT” OR VISIBLE CRACK-

ING OF THE LCD, WHICH ARE PRESUMED TO BE

DAMAGES RESULTING FROM MISUSE OR ABUSE.

To obtain warranty service in the U.S., please go to the website.

A repaired or replacement product assumes the remaining warranty of the original product or 90 days, whichever is longer.

Non-Warranty Repair Service – U.S.A.

Non-warranty repair covers service beyond the warranty period, or service requested due to damage resulting from misuse or abuse.

Contact Calculated Industries at the number listed above to obtain current product repair information and charges. Repairs are guaranteed for 90 days.

OCKET

EFERENCE

UIDE

— 31

Repair Service – Outside the U.S.A.

To obtain warranty or non-warranty repair service for goods purchased outside the U.S., contact the dealer through which you initially purchased the product. If you cannot reasonably have the product repaired in your area, you may contact CI to obtain current product repair information and charges, including freight and duties.

Disclaimer

CI MAKES NO WARRANTY OR REPRESENTATION,

EITHER EXPRESS OR IMPLIED, WITH RESPECT TO

THE PRODUCT’S QUALITY, PERFORMANCE, MER-

CHANTABILITY, OR FITNESS FOR A PARTICULAR

PURPOSE. AS A RESULT, THIS PRODUCT, INCLUD-

ING BUT NOT LIMITED TO, KEYSTROKE PROCE-

DURES, MATHEMATICAL ACCURACY AND PREPRO-

GRAMMED MATERIAL, IS SOLD “AS IS,” AND YOU

THE PURCHASER ASSUME THE ENTIRE RISK AS

TO ITS QUALITY AND PERFORMANCE.

IN NO EVENT WILL CI BE LIABLE FOR DIRECT, INDI-

RECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES RESULTING FROM ANY DEFECT IN THE

PRODUCT OR ITS DOCUMENTATION.

The warranty, disclaimer, and remedies set forth above are exclusive and replace all others, oral or written, expressed or implied. No CI dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty.

Some states do not allow the exclusion or limitation of implied warranties or liability for incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific rights, and you may also have other rights, which vary from state to state.

OCKET

EFERENCE

UIDE

— 32

FCC CLASS B

This equipment has been certified to comply with the limits for a Class B computing device, pursuant to

Subpart J of Part 15 of FCC rules.

LOOKING FOR NEW IDEAS

Calculated Industries, a leading manufacturer of specialfunction calculators and digital measuring instruments, is always looking for new product ideas in these areas.

If you have an idea, or a suggestion for improving this product or User's Guide, please submit your comments online at www.calculated.com under “Contact Us”,

“Product Idea Submittal Agreement”. Thank you.

OCKET

EFERENCE

UIDE

— 33

This equipment has been certified to comply with the limits for a Class B computing device, pursuant to Subpart J of Part 15 of FCC rules.

Software copyrighted and licensed to

Calculated Industries, Inc. by

Construction Master Technologies, LLC, 2006.

Pocket Reference Guide copyrighted by

Measure Master™ is a trademark and Calculated Industries® is a registered trademark of Calculated Industries, Inc.

CALCULATED INDUSTRIES®