Ortronics OR-OFP-BLANK mounting kit Datasheet

PDF

Documento

High Performance Structured

Cabling Products and Solutions

20 12|13

Product catalog

HIGH PERFORMANCE STRUCTURED CABLING

PRODUCTS & SOLUTIONS

OptiMo

®

Fiber

Optic Solutions

Enclosures

Cassettes

Ideal for data center/SAN or enterprise LAN applications,

OptiMo fiber optic solutions support common, convenient approaches to fiber optic cabling. Momentum ® series modular optical cassettes provide a system that is simple to design, quick to install, highly reliable and error-proof. For a conventional field-installation as well as factory-terminated pigtails for a splicing approach, we offer no-epoxy/no-polish and quick-cure anaerobic field-installable connectors. Also, for Secure Keyed LC fiber products, contact Ortronics ® . For all your installations, OptiMo fiber solutions guarantee quality and performance.

Adapter

Panels

Patch

Cords

Field-Installable

Connectors

Fiber Optic

Workstation

Ortronics is a solution developer partner within the Cisco

Developer Network

FC Series

Rack Mount

Cabinets

144

F E A T U R E D P R O D U C T S

NEW

P.143

OptiMo ® High

Density Rack

Mount Fiber

Cabinets

P.158

Momentum ® 4

Modular

Pre-Terminated

Systems

P.159

High

Density

Adapter

Panels

P.161

SpaceSaver

Fiber Optic

Cable

Assemblies

P.171

OptiMo

Pre-Polished

Connectors

P.179

Fib-or-Cop II

P.150

Pre-loaded

Rack Mount

Fiber Cabinets

P.158

Momentum 2

Modular

Pre-Terminated

Systems

P.159

Adapter

Panels

P.163

Fiber Optic

Cable

Assemblies

P.177

OptiMo

Field-Installable

Anaerobic

Connectors

P.181

TracJack

Modules and

Faceplates

P.154

Surface Mount

Fiber Cabinets

Momentum

Cassettes

158

Adapter

Panels

159

142

OPTIMO ® FIBER OPTIC SOLUTIONS

Ortronics ® offers innovative fiber optic solutions to meet all your needs with greater density, simpler installation, easier administration and higher performance.

The Ortronics range of rack mount fiber enclosures offers a comprehensive selection of products ideally suited to both large and small fiber installations. All fiber cabinets and related hardware are compatible with Mighty Mo ® advanced cable management systems, so one system meets all cabling needs.

Choose the appropriate pre-terminated cassettes and adapter panels required for either the

High Density system or for the standard density solution from the table below.

ENCLOSURE

OR-FC01U-M

OR-FC02U-M

OR-FC03U-M

OR-FC04U-M

TYPE

Patch & Splice

CAPACITY

High Density

CASSETTE

OR-M4 Series

ADAPTER PANEL

OR-HDFP Series

OR-FC01U-C

OR-FC02U-C

OR-FC03U-C

OR-FC04U-C

OR-FC01U-P

OR-FC02U-P

OR-FC03U-P

OR-FC04U-P

OR-FC01U-S

OR-FC02U-S

OR-FC03U-S

OR-FC04U-S

Patch & Splice

Patch

Splice

Standard Density

OR-M2 Series

N/A

OR-M2 Series

OR-OFP Series

N/A

OR-OFP Series

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

ENCLOSURES

Rack Mount Fiber Cabinets

High Density

NEW

In today’s data centers and SAN environments, space is often at a premium, making density more critical than ever. OptiMo ® High Density (HD) solutions offer the same advanced performance and reliability that you’ve come to expect from Ortronics ® standard density OptiMo products in a footprint designed for space-constrained installations. Using a comprehensive OptiMo HD solution of high density rack-mount fiber cabinets with either adapter panels or pre-terminated cassettes provides a complete fiber cross connect patching solution for applications where maximum density is required.

OR-FC01U-M

OR-FC02U-M

OR-FC03U-M

OR-FC04U-M

OptiMo HD

FC Series Rack-Mount

Fiber Cabinets

OptiMo high density rack-mount fiber enclosures come complete with internal fiber management hardware and bend limiting clips for superior fiber management.

These enclosures are compatible with all Ortronics Mighty Mo ® equipment racks and cabinets.

They are only able to accept

M4 cassettes and HDFP adapter panels. They are optimally designed for 48 fiber splice trays.

PART NO.

OR-FC01U-M

OR-FC02U-M

OR-FC03U-M

DESCRIPTION n High density 1U rack mount FC series fiber enclosure, black n Holds 4 high density HDFP series adapter panels or M4 high density cassettes n Holds two 48-F splice trays* n Front locking door n Fiber tray slides to the front or the rear n LC capacity: 96 fibers n 1.75˝ high, 1 rack unit, 15.65 lbs/7.10kg n Includes internal management clips n High density 2U rack mount FC series fiber enclosure, black n Holds 8 high density HDFP series adapter panels or M4 high density cassettes n Holds four 48-F splice trays* n Front locking door n Fiber tray slides to the front or the rear n LC capacity: 192 fibers n 3.5˝ high, 2 rack units, 16.75 lbs/7.62kg n Includes bend limiting clips and internal management clips n High density 3U rack mount FC series fiber enclosure, black n Holds 12 high density HDFP series adapter panels or M4 high density cassettes n Holds seven 48-F splice trays* n Front locking door n Fiber tray slides to the front or the rear n LC capacity: 288 fibers n 5.25˝ high, 3 rack units, 18.50 lbs/8.40kg n Includes bend limiting clips and internal management clips

OR-FC04U-M n High density 4U rack mount FC series fiber enclosure, black n Holds 16 high density HDFP series adapter panels or M4 high density cassettes n Holds ten 48-F splice trays* n Front locking door n Fiber tray slides to the front or the rear n LC capacity: 384 fibers n 7˝ high, 4 rack units, 20.65 lbs/9.36kg n Includes bend limiting clips and internal management clips

* NOTE: Splice tray capacity exceeds the fiber port capacity of the enclosures.

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 143

ENCLOSURES

Rack Mount Fiber Cabinets

Patching

144

OR-FC01U-P

OR-FC02U-P

OR-FC03U-P

OR-FC04U-P

OptiMo

FC Series

Fiber Patch Cabinets

Each fiber cabinet offers complete flexibility in terms of cable entry and exit, access to terminations from front and rear, and accommodates the unique needs of optical fiber bend radius limitation through enhanced patch cord management devices and novel internal fiber management components.

These enclosures are only compatible with M2 cassettes and OFP adapter panels.

PART NO.

OR-FC01U-P

OR-FC02U-P

DESCRIPTION n Holds three adapter panels or

Momentum ® cassettes n Front locking door n Fiber tray slides forward and backward n ST, SC, FC capacity: 36 fibers n MT-RJ, LC: 36 fibers n LC quad: 72 fibers n 1.75˝H, 1 rack unit, 15.65 lbs/7.10 kg n Includes internal management clips n Holds six adapter panels or Momentum cassettes n Front locking door n Fiber tray slides forward and backward n ST, SC, FC capacity: 72 fibers n MT-RJ, LC: 72 fibers n LC quad: 144 fibers n 3.5˝H, 2 rack units, 16.75 lbs/7.62 kg n Includes bend limiting clips and internal management clips

OR-FC03U-P n Holds nine adapter panels or

Momentum cassettes n Front locking door n Fiber tray slides forward and backward n ST, SC, FC capacity: 108 fibers n MT-RJ, LC: 108 fibers n LC quad: 216 fibers n 5.25˝H, 3 rack units, 18.50 lbs/8.40 kg n Includes bend limiting clips and internal management clips

OR-FC04U-P n Holds twelve adapter panels or

Momentum cassettes n Front locking door n Fiber tray slides forward and backward n ST, SC, FC capacity: 144 fibers n MT-RJ, LC: 144 fibers n LC quad: 288 fibers n 7˝H, 4 rack units, 20.65 lbs/9.36 kg n Includes bend limiting clips and internal management clips

NOTE: Splice trays sold separately.

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

ENCLOSURES

Rack Mount Fiber Cabinets

Patching & Splicing

OR-FC01U-C back/front view

OR-FC02U-C back/front view

OR-FC03U-C back/front view

OR-FC04U-C back/front view

OptiMo

FC Series

Fiber Patch and

Splice Cabinets

Each fiber cabinet offers complete flexibility allowing the ability to patch and splice in the same cabinet. Each cabinet has optimized cable entry and exit points, allows access to terminations from front and rear, and accommodates the unique needs of optical fiber bend radius limitation through enhanced patch cord management devices and novel internal fiber management components.

These enclosures are only compatible with M2 cassettes and OFP adapter panels.

PART NO.

OR-FC01U-C

OR-FC02U-C

OR-FC03U-C

DESCRIPTION n Holds two (12 fiber) splice trays n Holds three adapter panels n Front locking door n ST, SC, FC capacity: 36 fibers n MT-RJ, LC: 36 fibers n LC quad: 72 fibers n 1.75˝H, 1 rack unit, 15.65 lbs/7.10 kg n Includes internal management clips n Holds six (12 fiber) splice trays n Front locking door n Holds six adapter panels n ST, SC, FC capacity: 72 fibers n MT-RJ, LC: 72 fibers n LC quad: 144 fibers n 3.5˝H, 2 rack units, 16.75 lbs/7.62 kg n Includes bend limiting clips and internal management clips n Holds 11 (12 fiber) splice trays n Front locking door n Holds nine adapter panels n ST, SC, FC capacity: 108 fibers n MT-RJ, LC: 108 fibers n LC quad: 216 fibers n 5.25˝H, 3 rack units, 18.50 lbs/8.40 kg n Includes bend limiting clips internal management clips

OR-FC04U-C n Holds 16 (12 fiber) splice trays n Front locking door n Holds 12 adapter panels n ST, SC, FC capacity: 144 fibers n MT-RJ, LC: 144 fibers n LC quad: 288 fibers n 7˝H, 4 rack units, 20.65 lbs/9.36 kg n Includes bend limiting clips and internal management clips

* NOTE: Splice tray capacity exceeds the fiber port capacity of the enclosures.

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 145

ENCLOSURES

EMEA Rack Mount Fiber Cabinets

Patching

OR-61500569-00

Standard Low Profile Rack

Mount Patch Fiber Cabinets

PART NO.

The Ortronics ® range of 615 series mount fibre enclosure is ideally suited to both large and small fibre installations. Designed for use with our FibreMo fibre optic cable management rack system and our equipment cabinets, our fibre cabinet offers complete flexibility in terms of cable entry and exit; access to terminations from front, rear, and top; and accommodation for the unique needs of optical fibre bend radius limitation through enhanced patch cord management devices and novel internal fibre management components.

OR-61500569-00

DESCRIPTION n Holds three adapter panels n Slide-design drawer n High density ST, SC: 36 fibres n 1 rack unit n 4.5 kg n Depth: 220 mm

ENCLOSURES

Rack Mount Fiber Cabinets

Splicing

146

OR-FC01U-S

OR-FC02U-S

OR-FC03U-S

OR-FC04U-S

Fiber Splice Cabinets

Ortronics splice cabinets provide interconnect or cross connect facilities between horizontal and backbone inside plant (ISP) or outside plant (OSP) cables.

Each fiber cabinet offers high density splicing with internal fiber management accessories, has optimized cable entry and exit points, allows access to terminations from front and rear, and accommodates the unique needs of optical fiber bend radius limitation with novel internal fiber management components. Includes internal fiber management clips.

PART NO.

OR-FC01U-S

OR-FC02U-S

OR-FC03U-S

DESCRIPTION n Holds four (12 fiber) splice trays n Front locking door n 1.75˝H, 1 rack unit, 15.65 lbs/7.10 kg n Holds twelve (12 fiber) splice trays n Front locking door n 3.5˝H, 2 rack units, 16.75 lbs/7.62 kg n Holds twenty-two (12 fiber) splice trays n Front locking door n 5.25˝H, 3 rack units, 18.50 lbs/8.40 kg

OR-FC04U-S n Holds thirty-two (12 fiber) splice trays n Front locking door n 7˝H, 4 rack units, 20.65 lbs/9.36 kg

NOTE: Splice trays sold separately.

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

ENCLOSURES

Rack Mount Fiber Cabinet Accessories

OR-70700107-00

OR-FCBL-002

OR-FCTL-001

D-Ring Cable

Management Straps

Ortronics ® D-ring cable management straps include a

D-ring for easy adjustments.

The straps have a hook and loop type closure to secure and administer cables without damage. Package of 12.

Fiber Cabinet

Bend Limiting Clips

Helps maintain minimum bend radius and prevent micro bends on sharp edges of front and rear access points.

Tray Lock Kit

The tray lock kit can be easily installed into any FC Series cabinet tray to prevent it from sliding forward or backwards.

PART NO.

DESCRIPTION

OR-70700107-00 Black, .75˝ W x 12˝ L

NOTE: For additional styles and colors, see page 125.

PART NO.

OR-FCBL-002

PART NO.

OR-FCTL-001

DESCRIPTION

Pack of 2

DESCRIPTION

Tray lock kit

OR-FCBR-001

OR-FCBR-002

OR-FCBR-003

Cable Fastening

Bracket

Provides robust backbone cable retention for FC cabinets when installing from above or below cabinet. Accommodates cable of all diameters; fastens using flexible and strong hook/loop straps.

PART NO.

OR-FCBR-001

OR-FCBR-002

OR-FCBR-003

DESCRIPTION

For use with 1 rack unit cabinet, top position

For use with 2, 3, and 4 rack unit cabinet, top position

For use with 2, 3, and 4 rack unit cabinet, bottom position

NOTE: Two hook and loop straps included.

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 147

148

ENCLOSURES

Rack Mount Fiber Cabinet Accessories

OptiMo

FC Series

OR-70800158

Internal Fiber

Management Clips

PART NO.

OR-70800158

DESCRIPTION

Kit of eight clips

OR-FST2-F012

Fiber management clips installed

Splice Tray for

Fusion Splices

Transparent stackable design with hinged cover and mylar insert. Ideal for VFL verification.

PART NO.

OR-FST2-F012

DESCRIPTION

Fusion splice tray for 12 splices

OR-FST3-F048 Fusion splice tray for 48 splices*

* OR-FST3-F048 requires the use of OR-20500337 splice sleeves.

OR-FST3-F048

OR-20500043

OR-61500858

Splice Protection

PART NO.

OR-20500043

OR-20500337

DESCRIPTION

Heat shrink sleeves, 40 mm, package of 50, 3.0 mm

Heat shrink sleeves, 40 mm, package of 50, 2.5 mm

OptiMo Breakout Kits

To be used with loose tube cables.

PART NO.

OR-61500858

OR-61500868

DESCRIPTION

Breakout kit, 12 fiber

Breakout kit, 6 fiber

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

ENCLOSURES

Rack Mount Fiber Cabinet Accessories

OptiMo

FC Series

OR-ECDL001

Enclosure Door

Key Lock Kit

PART NO.

OR-ECDL001

DESCRIPTION

Enclosure door key lock kit

NOTE: Also compatible with EC series.

OR-ECDL002

Enclosure

Thumblatch Kit

PART NO.

OR-ECDL002

DESCRIPTION

Enclosure thumblatch kit

NOTE: Also compatible with EC series.

OR-FCWK-01

Enclosure Cable

Management Kit

PART NO.

OR-FCWK-01

DESCRIPTION

Enclosure cable management kit

Pack of 2 bend limiting clips plus edgeguards

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 149

ENCLOSURES

Rack Mount Fiber Cabinets

625 Series Pre-Loaded

The Ortronics ® range of pre-loaded rack mount fiber enclosures (625 Series) provides a comprehensive range ideally suited to both large and small installations. These enclosures are offered in 1U and 2U as a standard product. 625 Series fiber cabinet products are available with LC and SC adapters for single-mode or multimode applications. n Pre-loaded with fiber adapters for simple, quick installations n Slide-out drawer provides easy access for quick, reliable fiber termination and fiber management n Bend limiters included to support minimum bend radius requirements ensuring low loss transmission* n Universal mounting (19˝ or 23˝) for most rack types with standard EIA hole pattern n Internal fiber management ring to provide proper bend radius and slack storage of excess fiber n Termination access from front, top, and rear for internal fiber termination and management

Multimode, Face Recessed, 1 Rack Unit

OR-625MMC-12PF1RB OR-625MMC-24PF1RB PART NO.

OR-625MMC-24PL1RB

* 2U pre-loaded cabinets only.

DESCRIPTION

12-LC duplex (24 fibers) multimode, beige adapters, phosphor-bronze alignment sleeves

Multimode, 2 Rack Units

OR-625MMC-96PL1B OR-625MMC-48PD1B

OR-625MMC-12PF1RB

OR-625MMC-48PL1RB

12-SC simplex (12 fibers) multimode, beige adapters, phosphor-bronze alignment sleeves

24-LC duplex (48 fibers) multimode, beige adapters, phosphor-bronze alignment sleeves

OR-625MMC-24PF1RB

24-SC simplex (24 fibers) multimode, beige adapters, phosphor-bronze alignment sleeves

PART NO.

OR-625MMC-96PL1B

OR-625MMC-48PD1B

DESCRIPTION

48-LC duplex (96 fibers) multimode, beige adapters, phosphor-bronze alignment sleeves

24-SC duplex (48 fibers) multimode, beige adapters, phosphor-bronze alignment sleeves

Single-mode, Face Recessed, 1 Rack Unit

OR-625MMC-12PE1RB OR-625MMC-24PE1RB PART NO.

DESCRIPTION

150

Single-mode, 2 Rack Units

OR-625MMC-48PG1B OR-625MMC-96PP1B PART NO.

OR-625MMC-96PP1B

OR-625MMC-48PE1B

OR-625MMC-48PG1B

DESCRIPTION

48-LC duplex (96 fibers) single-mode, blue adapters, ceramic alignment sleeves

24-SC duplex (48 fibers) single-mode, blue adapters, ceramic alignment sleeves

48-SC simplex (48 fibers) single-mode, blue adapters, ceramic alignment sleeves

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

ENCLOSURES

OptiMo ® Raised Floor Fiber Patch Panels

Ortronics ® OptiMo raised floor patch panel allows data center managers and designers to take advantage of under-utilized installation space beneath the raised floor structure, providing greater flexibility in structured cabling design and maximizing usage of premium data center floor space.

Specifically designed to be installed in raised floor enclosures that are part of the cabling pathways, the OptiMo raised floor fiber patch panels address the special bend radius and depth requirements of fiber optic cabling systems.

Features n Fiber patch panel for underfloor installation n 19˝ wide, 1 unit or 2 unit high models available n Designed for installation within

2´ x 2´ underfloor box with angled mounting rails n Removable/reusable labeling cards

Benefits n Allows data center manager to take advantage of under-utilized space beneath raised floor n n

Provides the flexibility to suit any installation

Horizontal patch panel orientation n Convenient and accurate cabling administration and record keeping that is easily removed to provide rear patching access

NEW

OR-RFPHD01U

OR-RFPHD02U

High Density

Flush Mounting Rails

PART NO.

OR-RFPHD01U

OR-RFPHD02U

DESCRIPTION n 1 rack unit n Holds four High Density adapter panels

(HDFP Series) or four Momentum 4 cassettes n LC quad, 96 fibers n 2 rack units n Holds eight High Density adapter panels

(HDFP Series) or eight Momentum 4 cassettes n LC quad, 192 fibers

OR-RFP01U

OR-RFP02U

Flush Mounting Rails

PART NO.

OR-RFP01U

OR-RFP02U

DESCRIPTION n 1 rack unit n Holds three standard adapter panels

(OFP Series) or three Momentum 2 cassettes n ST, SC, FC capacity: 36 fibers n MT-RJ, LC: 36 fibers n LC quad: 72 fibers n 2 rack units n Holds six standard adapter panels

(OFP Series) or six Momentum 2 cassettes n ST, SC, FC capacity: 72 fibers n MT-RJ, LC: 72 fibers n LC quad: 144 fibers

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 151

ENCLOSURES

OptiMo ® Raised Floor Fiber Patch Panel Rails

NEW

High Density Angled Mounting Rails 45°

OR-RFPAHD01U OR-RFPAHD02U PART NO.

OR-RFPAHD01U

OR-RFPAHD02U

DESCRIPTION n 1 rack unit n Holds four High Density adapter panels

(HDFP Series) n Holds four Momentum 4 cassettes n LC quad, 96 fibers n 2 rack units n Holds eight High Density adapter panels

(HDFP Series) n Holds eight Momentum 4 cassettes n LC quad: 192 fibers

Angled Mounting Rails 45°

OR-RFPA01U OR-RFPA02U PART NO.

OR-RFPA01U

OR-RFPA02U

DESCRIPTION n 1 rack unit n Holds three standard adapter panels

(OFP Series) n Holds three Momentum 2 cassettes n ST, SC, FC: 18 fibers n MT-RJ, LC: 36 fibers n High density ST, SC: 36 fibers n LC quad: 72 fibers n 2 rack units n Holds six standard adapter panels

(OFP Series) n Holds six Momentum 2 cassettes n ST, SC, FC: 36 fibers n MT-RJ, LC: 72 fibers n High density ST, SC: 72 fibers n LC quad: 144 fibers

152 For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

ENCLOSURES

OptiMo ® Raised Floor Fiber Patch Panel Rails

NEW

High Density Angled Mounting Rails 56°– 60°

OR-RFPAHD01U-A OR-RFPAHD02U-A PART NO.

OR-RFPAHD01U-A

DESCRIPTION n 1 rack unit n Holds four High Density adapter panels

(HDFP Series) n Holds four Momentum 4 cassettes n LC quad, 96 fibers

OR-RFPAHD02U-A n 2 rack units n Holds eight High Density adapter panels

(HDFP Series) n Holds eight Momentum 4 cassettes n LC quad: 192 fibers

NOTE: Please contact raised floor enclosure manufacturer to verify rail angle.

NOTE: May require stand-off bracket kit when using Momentum cassettes.

Angled Mounting Rails 56°– 60°

OR-RFPA01U-A OR-RFPA02U-A PART NO.

OR-RFPA01U-A

DESCRIPTION n 1 rack unit n Holds three standard adapter panels

(OFP Series) n Holds three Momentum 2 cassettes n ST, SC, FC: 18 fibers n MT-RJ, LC: 36 fibers n High density ST, SC: 36 fibers n LC quad: 72 fibers

OR-RFPA02U-A n 2 rack units n Holds six standard adapter panels

(OFP Series) n Holds six Momentum 2 cassettes n ST, SC, FC: 36 fibers n MT-RJ, LC: 72 fibers n High density ST, SC: 72 fibers n LC quad: 144 fibers

NOTE: Please contact raised floor enclosure manufacturer to verify rail angle.

NOTE: May require stand-off bracket kit when using Momentum cassettes.

OR-60400968

Angled Stand-off

Bracket Kit

Kit used with raised floor enclosure with 56°-60° mounting rails. These stand-off brackets may be needed to extend the mounting surface of the raised floor enclosure to accommodate the depth limitations of some

2´ x 2´ raised floor enclosures.

Includes left and right bracket.

PART NO.

OR-60400968

DESCRIPTION

Kit used with raised floor enclosure

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 153

154

ENCLOSURES

Surface Mount Cabinets

Ortronics ® 615 Series surface mount fiber cabinets secure, protect, and organize up to

384 single-mode or multimode optical terminations. n Standard OFP Series adapter panels snap in for easy installation, removal, and expansion n Surface/wall mountable is ideal for space limited installations n Top/bottom cable entry simplifies installations, moves, adds, and changes n Internal cable management included—facilitates organization and clean installations n Open designs with available latch are economical and easily accessible

NOTE: Contact Ortronics sales for cassette compatibility.

615 Series Surface Mount Fiber Cabinets

OR-615SMFC-12P OR-615SMFC-LX-12P PART NO.

OR-615SMFC-24P

OR-615SMFC-48P

OR-615SMFC-96P

OR-615SMFC-24P/S

OR-615SMFC-48P/S

OR-615SMFC-12P

OR-615SMFC-LX-12P

OR-615SMFC-24P

OR-615SMFC-24P/S

OR-615SMFC-48P

OR-615SMFC-48P/S

OR-615SMFC-96P

DESCRIPTION n Patch cabinet: Holds two adapter panels n ST, SC, FC: 12 fibers n ST Duplex, SC: 24 fibers n MT-RJ, LC: 24 fibers n LC quad: 48 fibers n Open access, 10˝ x 9˝ x 3.5˝, latching door, 5.5 lbs n Patch cabinet: Holds two adapter panels n ST, SC, FC: 12 fibers n ST Duplex, SC: 24 fibers n MT-RJ, LC: 24 fibers n LC quad: 48 fibers n 10˝ x 9˝ x 3.5˝, locking door, 6.0 lbs n Patch cabinet: Holds four adapter panels n ST, SC, FC: 24 fibers n ST Duplex, SC: 48 fibers n MT-RJ, LC: 48 fibers n LC quad: 96 fibers n 12˝ x 12˝ x 3.5˝, 9.0 lbs n Patch/splice cabinet: Holds four adapter panels n ST, SC, FC: 24 fibers n ST Duplex, SC: 48 fibers n MT-RJ, LC: 48 fibers n LC quad: 96 fibers n Holds four, 12-fiber, 7˝ splice trays

(holds up to 48 splices) n 12˝ x 16˝ x 3.5˝, 9.0 lbs n Patch cabinet: Holds eight adapter panels n ST, SC, FC: 48 fibers n ST Duplex, SC: 96 fibers n MT-RJ, LC: 96 fibers n LC quad: 192 fibers n 22˝ x 12˝ x 3.5˝, 15.0 lbs n Patch/splice cabinet: Holds eight adapter panels, same chassis as OR-615SMFC-48P n Holds four 12-fiber splice trays,

7˝ splice trays (up to 48 fibers) n 22˝ x 12˝ x 3.5˝, 15.0 lbs n Patch cabinet: Holds 16 adapter panels n ST, SC, FC: 96 fibers n ST Duplex, SC: 192 fibers n MT-RJ, LC: 192 fibers n LC quad: 384 fibers n 16.75˝ x 13.5˝ x 7˝, 20 lbs

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

ENCLOSURES

Surface Mount Cabinet Accessories

OR-20500043

Splice Protection

PART NO.

OR-20500043

DESCRIPTION

Heat shrink sleeves, 40 mm, package of 50, 3.0 mm

OR-62600002

7˝ Splice Trays

PART NO.

OR-62600002

DESCRIPTION

Mechanical, 12 fibers*

OR-62600003 Fusion, 12 fibers*

*For use with surface mount cabinet only.

OR-62600003

OR-61500858

OptiMo

Breakout Kits

To be used with loose tube cables.

PART NO.

OR-61500858

OR-61500868

DESCRIPTION

Breakout kit, 12 fiber

Breakout kit, 6 fiber

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 155

CASSETTES

Ideal for data centers and SANs, the Momentum

series is a modular, pre-terminated cabling system that integrates optical cassettes with advanced fiber cable in the backbone. It’s simple to use, fast to install, and the connectors are factory terminated and tested. The cassettes are supported by a range of rack-mount and underfloor patch panels for convenient installation.

It’s the System That Counts

The performance of a fiber optic cabling system needs to be viewed from a system standpoint and not just as an assembly of individual components.

The optical loss performance of a modular cassette-based MTP*/MPO link is primarily affected by connector end-face polishing and connector end preparation at the factory.

Therefore, it is essential that the MTP/MPO backbone cables and patch cords are pre-pared with a high-quality process that complements the cassette manufacturing process, otherwise, the expected end-to-end link insertion loss performance will not be realized.

* MTP is a registered trademark of US Conec.

Simply put, to achieve improved performance you need high or premium cassettes with matching backbone and patch cables.

156 For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

CASSETTES

Momentum ® Modular Pre-Terminated Systems

Patch

Cords

Momentum

Pre-Terminated

Cassette

PREMIUM PERFORMANCE SYSTEM

Patch Cords/Pigtails

0.15 dB max

Cassettes

0.50 dB max

P3 Series M4LCQ24-50EA3A1

M2LCQ24-50E3A1

MTP to MTP

Backbone cable

MTP-MTP

Backbone Cables

0.35 dB max

12F loose tube cable,

MTP 0.35 dB Loss

Momentum

Pre-Terminated

Cassette

Cassettes

0.50 dB max

M4LCQ24-50EA3A1

M2LCQ24-50E3A1

Patch

Cords

Patch Cords/Pigtails

0.15 dB max

P3 Series

HIGH PERFORMANCE SYSTEM

Patch Cords/Pigtails

0.15 dB max

Cassettes

0.75 dB max

P3 Series M4LCQ24-50E

M2LCQ24-50E

MTP-MTP

Backbone Cables

0.50 dB max

12F loose tube cable,

MTP 0.50 dB Loss

Cassettes

0.75 dB max

M4LCQ24-50E

M2LCQ24-50E

Patch Cords/Pigtails

0.15 dB max

P3 Series

0.15 dB Loss

STANDARD PERFORMANCE SYSTEM

Patch Cords/Pigtails Cassettes

1.25 dB max

MTP-MTP

Backbone Cables

0.75 dB max

P1 Series

0.50 dB max MM

0.30 dB max SM

M4LCQ24-50E

M2LCQ24-50E

M2LCD12-50E

M2SCD12-50E also available in single-mode and 62.5

12F-72F loose tube cable,

MTP 0.50dB Loss

Cassettes

1.25 dB max

M4LCQ24-50E

M2LCQ24-50E

M2LCD12-50E

M2SCD12-50E also available in single-mode and 62.5

Patch Cords/Pigtails

P1 Series

0.50 dB max MM

0.30 dB max SM

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 157

158

CASSETTES

Momentum ® 4 Modular Pre-Terminated Systems

NEW

OR-M4LCQ24-50EA3A1

OR-M4LCQ24-09

OR-M4LCQ24-62

Momentum 4 Cassettes

PART NO.

DESCRIPTION

Momentum 4 modular fiber optic pre-terminated cassettes combine the plug-and-play functionality of our standard cassette with the high density footprint accommodating

96 fibers in one rack unit.

OR-M4LCQ24-50EA3A1

OR-M4LCQ24-50E

LC Quad, 24 fiber, 50-micron LOMF*,

2 MTP**(M), premium performance, single unit

LC Quad, 24 fiber, 50-micron LOMF*,

2 MTP(M), high performance, single unit

The Momentum 4 High Density

Cassette fully supports the latest networking standards through

10 Gb/s and beyond. It is available in three performance levels for Laser

Optimized Multimode 50 micron fiber.

Each cassette has a data label with insertion loss value for each port.

OR-M4LCQ24-09

OR-M4LCQ24-62

LC Quad, 24 fiber, single-mode,

2 MTP(M), high performance, single unit

LC Quad, 24 fiber, 62.5-micron multimode,

2 MTP(M), high performance, single unit

* Effective modal bandwidth 4900 MHz-km @ 850nm.

** MTP is a registered trademark of US Conec.

n Premium Performance cassette/

mated pair insertion loss: 0.50dB n High Performance cassettes/

mated pair insertion loss: 0.75dB n Standard Performance cassette/

mated pair insertion loss: 1.25dB n 1.05dB total insertion loss for

single-mode system n Insertion loss value for each port

printed on adhesive data label

CASSETTES

Momentum 2 Modular Pre-Terminated Systems

OR-M2LCQ24-50E

OR-M2LCD12-50E

OR-M2LCD12-09

Momentum 2 Cassettes

Momentum 2 modular fiber optic pre-terminated cassettes provide the fastest method of structured cabling deployment: plug it in and you’re ready to go. Factory- terminated/tested cassettes guarantee field performance.

PART NO.

OR-M2LCQ24-50E3A1

OR-M2LCQ24-50E

OR-M2LCQ24-09

DESCRIPTION

LC Quad, 24 fiber, 50-micron LOMF*,

2 MTP(M), premium performance, single unit

LC Quad, 24 fiber, 50-micron LOMF*,

2 MTP(M), high performance, single unit

LC Quad, 24 fiber, single-mode,

2 MTP(M), high performance, single unit

Full support of today’s most rigorous transmission technologies up through 10 Gb/s.

OR-M2LCD12-50E

OR-M2LCD12-09

LC Quad, 24 fiber, 62.5-micron multimode,

1 MTP(M), high performance, single unit

LC Duplex, 12 fiber, single-mode,

1 MTP(M), high performance, single unit n 1.05 dB total insertion loss for

single-mode n Single unit footprint for space

savings in patch panels

and cabinets. n Data label printed with insertion

loss value for each port adhered

to the cassette housing.

OR-M2SCD12-50E

OR-M2SCD12-09

SC Duplex, 12 fiber, 50-micron LOMF*,

1 MTP(M), high performance, single unit

SC Duplex, 12 fiber, single-mode,

1 MTP(M), high performance, single unit

*Effective Modal Bandwidth: 4900 MHz-km @ 850nm.

NOTE: Other cassette fiber types are available. Contact Ortronics sales.

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

ADAPTER PANELS

The Ortronics ® OptiMo ® OFP and HDFP series adapter panels are used with our popular FC Series modular fiber cabinets, offering great flexibility in structured cabling design. Front-removable adapter panels are available with LC, SC, ST, and MT-RJ adapters and feature options ideal for both single-mode and multimode applications. They are held securely in place with plunger/grommet fasteners.

Where applicable, the adapters used (LC, SC, and ST) contain application specific alignment sleeves to ensure optimal performance in conjunction with the economic constraints of network design.

For common multimode applications, phosphor-bronze (metal) alignment sleeves are used. With the increasing demands of high bandwidth multimode systems, like those containing laser-optimized multimode fiber, ceramic alignment sleeves are recommended. Finally, to ensure dependable transmission, ceramic sleeves are always used in single-mode applications.

NEW

High Density Adapter Panels

OR-HDFP-MPA72LA OR-HDFP-MPA72CA OR-HDFP-MPA72MA PART NO.

DESCRIPTION

OR-HDFP-LCQ24LC OR-HDFP-LCQ24AC OR-HDFP-LCQ24MB

OR-HDFP-BLANK

OR-HDFP-LCQ24MB

HD, 6-LC Quad (24 fiber) adapter panel, multimode, beige adapters, phosphor-bronze alignment sleeves

OR-HDFP-BLANK HD, Blank Panel, black

*Type A MPO adapters are Key Up/Key Down.

Adapter Panels

OR-OFP-MPA96LA OR-OFP-MPA96CA

OR-OFP-MPA72LA

OR-OFP-LCQ24LC

OR-OFP-LCD12LC

OR-OFP-MPA72CA

OR-OFP-LCQ24AC

OR-OFP-LCD12AC

OR-OFP-MPA96MA

OR-OFP-MPA72MA

OR-OFP-LCQ24MB

OR-OFP-LCD12MB

PART NO.

OR-OFP-MPA96LA

OR-OFP-MPA96CA

OR-OFP-MPA96MA

OR-OFP-MPA72LA

OR-OFP-MPA72CA

OR-OFP-MPA72MA

OR-OFP-LCQ24LC

OR-OFP-LCQ24AC

OR-OFP-LCQ24MB

OR-OFP-LCD12LC

OR-OFP-LCD12AC

OR-OFP-LCD12MB

DESCRIPTION

8-MPO adapter panel, feed-through, multimode, aqua adapters, Type A*

8-MPO adapter panel, feed-through, single-mode, green adapters, Type A*

8-MPO adapter panel, feed-through, multimode, beige adapters, Type A*

6-MPO adapter panel, feed-through, multimode, aqua adapters, Type A*

6-MPO adapter panel, feed-through, single-mode, green adapters, Type A*

6-MPO adapter panel, feed-through, multimode, beige adapters, Type A*

6-LC Quad (24 fiber) adapter panel, multimode, aqua adapters, ceramic alignment sleeves

6-LC Quad (24 fiber) adapter panel, single-mode, blue adapters, ceramic alignment sleeves

6-LC Quad (24 fiber) adapter panel, multimode, beige adapters, phosphor-bronze alignment sleeves

6-LC Duplex (12 fiber) adapter panel, multimode, aqua adapters, ceramic alignment sleeves

6-LC Duplex (12 fiber) adapter panel, singlemode, blue adapters, ceramic alignment sleeves

6-LC Duplex (12 fiber) adapter panel, multimode, beige adapters, phosphor-bronze alignment sleeves

*Type A MPO adapters are Key Up/Key Down.

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 159

160

ADAPTER PANELS

OR-OFP-SCD06MB OR-OFP-SCD06AC OR-OFP-SCD06LC

OR-OFP-SCD08MB OR-OFP-SCD08AC OR-OFP-SCD08LC

OR-OFP-SCD12MB OR-OFP-SCD12AC OR-OFP-SCD12LC

OR-OFP-SCS06MB OR-OFP-SCS06AC OR-OFP-SCS06LC

OR-OFP-MTD12MA OR-OFP-MTD12AA OR-OFP-MTD12LA

OR-OFP-STS06NB OR-OFP-STS06NC OR-OFP-STD08MB

OR-OFP-STD08AC OR-OFP-STD08LC OR-OFP-STD12MB

OR-OFP-STD12AC OR-OFP-STD12LC OR-OFP-BLANK

PART NO.

OR-OFP-SCD06MB

OR-OFP-SCD06AC

OR-OFP-SCD06LC

OR-OFP-SCD08MB

OR-OFP-SCD08AC

OR-OFP-SCD08LC

OR-OFP-SCD12MB

OR-OFP-SCD12AC

OR-OFP-SCD12LC

OR-OFP-SCS06MB

OR-OFP-SCS06AC

OR-OFP-SCS06LC

DESCRIPTION

3-SC duplex (6 fibers) multimode, beige adapters,phosphor-bronze alignment sleeves*

3-SC duplex (6 fibers) single-mode, blue adapters, ceramic alignment sleeves*

3-SC duplex (6 fibers) multimode, aqua adapters, ceramic alignment sleeves*

4-SC duplex (8 fibers) multimode, beige adapters, phosphor-bronze alignment sleeves

4-SC duplex (8 fibers) single-mode, blue adapters, ceramic alignment sleeves

4-SC duplex (8 fibers) multimode, aqua adapters, ceramic alignment sleeves

6-SC duplex (12 fibers) multimode, beige adapters, phosphor-bronze alignment sleeves

6-SC duplex (12 fibers) single-mode, blue adapters, ceramic alignment sleeves

6-SC duplex (12 fibers) multimode, aqua adapters, ceramic alignment sleeves

6-SC simplex (6 fibers) multimode, beige adapters, phosphor-bronze alignment sleeves

6-SC simplex (6 fibers) single-mode, blue adapters, ceramic alignment sleeves

6-SC simplex (6 fibers) multimode, aqua adapters, ceramic alignment sleeves

OR-OFP-MTD12AA

OR-OFP-MTD12LA

OR-OFP-STS06NB

OR-OFP-STS06NC

OR-OFP-STD08MB

OR-OFP-STD08AC

OR-OFP-STD08LC

OR-OFP-STD12MB

OR-OFP-STD12AC

OR-OFP-STD12LC

OR-OFP-BLANK

6-MT-RJ duplex (12 fibers) single-mode, blue adapters

6-MT-RJ duplex (12 fibers) multimode, aqua adapters

6-ST simplex (6 fibers) multimode adapters, phosphor-bronze alignment sleeves, metal adapters

6-ST simplex (6 fibers) single-mode, ceramic alignment sleeves, metal adapters

4-ST duplex (8 fibers) multimode adapters, phosphor-bronze alignment sleeves, beige adapters

4-ST duplex (8 fibers) single-mode adapters, ceramic alignment sleeves, blue adapters

4-ST duplex (8 fibers) multimode adapters, ceramic alignment sleeves, aqua adapters

6-ST duplex (12 fibers) multimode adapters, phosphor-bronze alignment sleeves, beige adapters

6-ST duplex (12 fibers) single-mode adapters, ceramic alignment sleeves, blue adapters

6-ST duplex (12 fibers) multimode adapters, ceramic alignment sleeve, aqua adapters

Blank panel, black

*Designation strip kit provided for accurate port identification.

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

PATCH CORDS

SpaceSaver Fiber Optic Cable Assemblies

Ideal for Data Center Applications

The SpaceSaver line of duplex fiber optic patch cords features a single 2.4 mm round jacketed cable. These patch cords are available with duplex LC connectors at each end in either A-B or A-A types per the TIA 568 standard. These patch cords are ideal for high density installations common in data centers and SANs optimizing the available vertical and horizontal cable routing spaces.

NOTE: For other lengths and configurations, consult the Ortronics sales department.

A–B POLARITY

A

B

A

A–A POLARITY

B

fig. 1

A

B

fig. 2

A

SpaceSaver Duplex Fiber Optic Patch Cords for Premium & High Performance Systems

OR-P3DF6LPAZAZ001M

OptiMo Laser Optimized (50/125) PC/OFNP (A-B*)

PART NO.

DESCRIPTION

OR-P3DF6LPAZAZ001M 1 meter

OR-P3DF6LPAZAZ002M 2 meters

OR-P3DF6LPAZAZ003M 3 meters

OptiMo Laser Optimized (50/125) PC/OFNP (A-A**)

PART NO.

DESCRIPTION

OR-P3RF6LPAZAZ001M

OR-P3RF6LPAZAZ002M

OR-P3RF6LPAZAZ003M

1 meter

2 meters

3 meters

NOTE: *A-B patch cords reverse the fiber positions (fig. 1), **A-A patch cords do not reverse the fiber (fig. 2).

SpaceSaver Duplex Fiber Optic Patch Cords for Standard Performance Systems

OR-P1DF6LPAZAZ001M

OptiMo Laser Optimized (50/125) PC/OFNP (A-B*)

PART NO.

DESCRIPTION

OR-P1DF6LPAZAZ001M 1 meter

OR-P1DF6LPAZAZ002M 2 meters

OR-P1DF6LPAZAZ003M 3 meters

OptiMo Laser Optimized (50/125) PC/OFNP (A-A*)

PART NO.

DESCRIPTION

OR-P1RF6LPAZAZ001M

OR-P1RF6LPAZAZ002M

OR-P1RF6LPAZAZ003M

1 meter

2 meters

3 meters

OR-P1RC6IPUZUZ001M

OptiMo Single-mode UPC/OFNP (A-B*)

PART NO.

DESCRIPTION

OR-P1DC6IPUZUZ001M 1 meter

OR-P1DC6IPUZUZ002M 2 meters

OR-P1DC6IPUZUZ003M 3 meters

OptiMo Single-mode UPC/OFNP (A-A*)

PART NO.

DESCRIPTION

OR-P1RC6IPUZUZ001M 1 meter

OR-P1RC6IPUZUZ002M 2 meters

OR-P1RC6IPUZUZ003M 3 meters

OR-P1DA6BPAZAZ001M

OptiMo (62.5/125) PC/OFNP (A-B*)

PART NO.

DESCRIPTION

OR-P1DA6BPAZAZ001M 1 meter

OR-P1DA6BPAZAZ002M 2 meters

OR-P1DA6BPAZAZ003M 3 meters

OptiMo (62.5/125) PC/OFNP (A-A*)

PART NO.

DESCRIPTION

OR-P1RA6BPAZAZ001M 1 meter

OR-P1RA6BPAZAZ002M 2 meters

OR-P1RA6BPAZAZ003M 3 meters

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 161

PATCH CORDS

Fiber Optic Cable Assemblies

NOTE: Duplex zipcord jumpers include removable duplexing clips (unassembled in the bag).

Duplex Fiber Optic Patch Cords for Premium & High Performance Systems

OptiMo ® LOMF (50/125)

PC/OFNR, 2mm Zip Cord

OR-P3DF2LRGZGZ001M DUPLEX,

LC-PC TO LC-PC

LENGTH

OR-P3DF2LRGZGZ001M 1 meter

OR-P3DF2LRGZGZ002M 2 meters

OR-P3DF2LRGZGZ003M 3 meters

OR-P3DF2LRFZFZ001M DUPLEX,

SC-PC TO SC-PC

OR-P3DF2LRFZFZ001M

OR-P3DF2LRFZFZ002M

OR-P3DF2LRFZFZ003M

LENGTH

1 meter

2 meters

3 meters

OR-P3DF2LRFZGZ001M DUPLEX,

SC-PC TO LC-PC

LENGTH

OR-P3DF2LRFZGZ001M 1 meter

OR-P3DF2LRFZGZ002M 2 meters

OR-P3DF2LRFZGZ003M 3 meters

162 For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

PATCH CORDS

Fiber Optic Cable Assemblies

NOTE: Duplex zipcord jumpers include removable duplexing clips (unassembled in the bag).

Duplex Fiber Optic Patch Cords for Standard Performance Systems

OptiMo ® LOMF (50/125)

PC/OFNR, 2mm Zip Cord

OptiMo Single-mode

UPC/OFNR, 2mm Zip Cord

OR-P1DF2LRGZGZ001M OR-P1DC2IRSZSZ001M DUPLEX,

LC-PC TO LC-PC

LENGTH

OR-P1DF2LRGZGZ001M 1 meter

OR-P1DF2LRGZGZ002M 2 meters

OR-P1DF2LRGZGZ003M 3 meters

DUPLEX,

LC-UPC TO LC-UPC

LENGTH

OR-P1DC2IRSZSZ001M 1 meter

OR-P1DC2IRSZSZ002M 2 meters

OR-P1DC2IRSZSZ003M 3 meters

OR-P1DF2LRFZFZ001M OR-P1DC2IRRZRZ001M DUPLEX,

SC-PC TO SC-PC

OR-P1DF2LRFZFZ001M

OR-P1DF2LRFZFZ002M

OR-P1DF2LRFZFZ003M

LENGTH

1 meter

2 meters

3 meters

DUPLEX,

SC-UPC TO SC-UPC

LENGTH

OR-P1DC2IRRZRZ001M 1 meter

OR-P1DC2IRRZRZ002M 2 meters

OR-P1DC2IRRZRZ003M 3 meters

OR-P1DF2LRFZGZ001M OR-P1DC2IRRZSZ001M DUPLEX,

SC-PC TO LC-PC

LENGTH

OR-P1DF2LRFZGZ001M 1 meter

OR-P1DF2LRFZGZ002M 2 meters

OR-P1DF2LRFZGZ003M 3 meters

DUPLEX,

SC-UPC TO LC-UPC

LENGTH

OR-P1DC2IRRZSZ001M 1 meter

OR-P1DC2IRRZSZ002M 2 meters

OR-P1DC2IRRZSZ003M 3 meters

Duplex Fiber Optic Patch Cords for Standard Performance Systems

OR-P1DA2BRGZGZ001M

OptiMo Multimode (62.5/125)

PC/OFNR, 2mm Zip Cord

DUPLEX,

LC-PC TO LC-PC

LENGTH

OR-P1DA2BRGZGZ001M 1 meter

OR-P1DA2BRGZGZ002M 2 meters

OR-P1DA2BRGZGZ003M 3 meters

OR-P1DA2BRFZFZ001M DUPLEX,

SC-PC TO SC-PC

LENGTH

OR-P1DA2BRFZFZ001M 1 meter

OR-P1DA2BRFZFZ002M 2 meters

OR-P1DA2BRFZFZ003M 3 meters

OR-P1DA2BRFZGZ001M DUPLEX,

SC-PC TO LC-PC

LENGTH

OR-P1DA2BRFZGZ001M 1 meter

OR-P1DA2BRFZGZ002M 2 meters

OR-P1DA2BRFZGZ003M 3 meters

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 163

164

PATCH CORDS

Fiber Optic Cable Assemblies

Low Smoke Zero Halogen

NOTE: Duplex zipcord jumpers include removable duplexing clips (unassembled in the bag).

Duplex Fiber Optic Patch Cords for Standard Performance Systems

OptiMo ® LOMF (50/125)

PC/LSZH, 2mm Zip Cord

OptiMo Single-mode

UPC/LSZH, 2mm Zip Cord

OR-P1DF2LLGZGZ001M OR-P1DC2ILSZSZ001M DUPLEX,

LC-PC TO LC-PC

LENGTH

OR-P1DF2LLGZGZ001M 1 meter

OR-P1DF2LLGZGZ002M 2 meters

OR-P1DF2LLGZGZ003M 3 meters

DUPLEX,

LC-UPC TO LC-UPC

LENGTH

OR-P1DC2ILSZSZ001M 1 meter

OR-P1DC2ILSZSZ002M 2 meters

OR-P1DC2ILSZSZ003M 3 meters

OR-P1DF2LLFZFZ001M OR-P1DC2ILRZRZ001M DUPLEX,

SC-PC TO SC-PC

OR-P1DF2LLFZFZ001M

OR-P1DF2LLFZFZ002M

OR-P1DF2LLFZFZ003M

LENGTH

1 meter

2 meters

3 meters

DUPLEX,

SC-UPC TO SC-UPC

LENGTH

OR-P1DC2ILRZRZ001M 1 meter

OR-P1DC2ILRZRZ002M 2 meters

OR-P1DC2ILRZRZ003M 3 meters

OR-P1DF2LLFZGZ001M OR-P1DC2ILRZSZ001M DUPLEX,

SC-PC TO LC-PC

LENGTH

OR-P1DF2LLFZGZ001M 1 meter

OR-P1DF2LLFZGZ002M 2 meters

OR-P1DF2LLFZGZ003M 3 meters

DUPLEX,

SC-UPC TO LC-UPC

LENGTH

OR-P1DC2ILRZSZ001M 1 meter

OR-P1DC2ILRZSZ002M 2 meters

OR-P1DC2ILRZSZ003M 3 meters

Duplex Fiber Optic Patch Cords for Standard Performance Systems

OR-P1DA2BLGZGZ001M

OptiMo Multimode (62.5/125)

PC/LSZH, 2mm Zip Cord

DUPLEX,

LC-PC TO LC-PC

LENGTH

OR-P1DA2BLGZGZ001M 1 meter

OR-P1DA2BLGZGZ002M 2 meters

OR-P1DA2BLGZGZ003M 3 meters

OR-P1DA2BLFZFZ001M DUPLEX,

SC-PC TO SC-PC

LENGTH

OR-P1DA2BLFZFZ001M 1 meter

OR-P1DA2BLFZFZ002M 2 meters

OR-P1DA2BLFZFZ003M 3 meters

OR-P1DA2BLFZGZ001M DUPLEX,

SC-PC TO LC-PC

LENGTH

OR-P1DA2BLFZGZ001M 1 meter

OR-P1DA2BLFZGZ002M 2 meters

OR-P1DA2BLFZGZ003M 3 meters

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

PATCH CORDS

Fiber Optic Cable Assemblies for

Premium & High Performance Systems

NOTE: All pigtail products include a 1 meter breakout section consisting of 900 µm buffered fiber with terminated ends. LC, SC and ST cable assemblies have connectors with ceramic ferrules. For other lengths and configurations, consult the Ortronics sales department.

Single Connector Pigtails

OR-P3PF9FRFZZZ001M

OptiMo Laser Optimized

(50/125) PC/OFNR

PREMIUM PERFORMANCE

1 FIBER CONNECTOR

PIGTAIL, SC-PC, 50 LOMF

LENGTH

OR-P3PF9FRFZZZ001M

OR-P3PF9FRFZZZ002M

1 meter

2 meters

OR-P3PF9FRGZZZ001M PREMIUM PERFORMANCE

1 FIBER CONNECTOR

PIGTAIL, LC-PC, 50 LOMF

OR-P3PF9FRGZZZ001M

OR-P3PF9FRGZZZ002M

LENGTH

1 meter

2 meters

Six Connector Pigtails

OR-P3SF4ZRFZZZ001M

OR-P3SF4ZRGZZZ001M

OptiMo Laser Optimized

(50/125) PC/OFNR

PREMIUM PERFORMANCE

6 FIBER CONNECTOR

PIGTAIL, SC-PC, 50 LOMF

OR-P3SF4ZRFZZZ001M

OR-P3SF4ZRFZZZ002M

LENGTH

1 meter

2 meters

PREMIUM PERFORMANCE

6 FIBER CONNECTOR

PIGTAIL, LC-PC, 50 LOMF

OR-P3SF4ZRGZZZ001M

OR-P3SF4ZRGZZZ002M

LENGTH

1 meter

2 meters

Twelve Connector Pigtails

OR-P3TF4ZRFZZZ001M

OR-P3TF4ZRGZZZ001M

OptiMo Laser Optimized

(50/125) PC/OFNR

PREMIUM PERFORMANCE

12 FIBER CONNECTOR

PIGTAIL, SC-PC, 50 LOMF

OR-P3TF4ZRFZZZ001M

OR-P3TF4ZRFZZZ002M

LENGTH

1 meter

2 meters

PREMIUM PERFORMANCE

12 FIBER CONNECTOR

PIGTAIL, LC-PC, 50 LOMF

OR-P3TF4ZRGZZZ001M

OR-P3TF4ZRGZZZ002M

LENGTH

1 meter

2 meters

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 165

166

PATCH CORDS

Fiber Optic Cable Assemblies for

Standard Performance Systems

Single Connector Pigtails

OR-P1PF9FRFZZZ001M

OptiMo ® Multimode

(62.5/125) PC/OFNR

OptiMo Laser Optimized

(50/125) PC/OFNR

OptiMo Single-mode

UPC/OFNR

OR-P1PC9FRRZZZ001M

1 CONNECTOR

PIGTAIL, SC-PC 1 FIBER

1 CONNECTOR

PIGTAIL, SC-PC 1 FIBER

1 CONNECTOR

PIGTAIL, SC-UPC 1 FIBER

OR-P1PA9FRFZZZ001M 1 meter OR-P1PF9FRFZZZ001M 1 meter OR-P1PC9FRRZZZ001M 1 meter

OR-P1PA9FRFZZZ002M 2 meters OR-P1PF9FRFZZZ002M 2 meters OR-P1PC9FRRZZZ002M 2 meters

OR-P1PF9FRGZZZ001M OR-P1PC9FRSZZZ001M

1 CONNECTOR

PIGTAIL, LC-PC 1 FIBER

1 CONNECTOR

PIGTAIL, LC-PC 1 FIBER

1 CONNECTOR

PIGTAIL, LC-UPC 1 FIBER

OR-P1PA9FRGZZZ001M 1 meter OR-P1PF9FRGZZZ001M 1 meter OR-P1PC9FRSZZZ001M 1 meter

OR-P1PA9FRGZZZ002M 2 meters OR-P1PF9FRGZZZ002M 2 meters OR-P1PC9FRSZZZ002M 2 meters

Six Connector Pigtails

OR-P1SF4ZRFZZZ001M

OptiMo Multimode

(62.5/125) PC/OFNR

OptiMo Laser Optimized

(50/125) PC/OFNR

OptiMo Single-mode

UPC/OFNR

OR-P1SC4ZRRZZZ001M

6 CONNECTOR

PIGTAIL, SC-PC 6 FIBER

6 CONNECTOR

PIGTAIL, SC-PC 6 FIBER

6 CONNECTOR

PIGTAIL, SC-UPC 6 FIBER

OR-P1SA4ZRFZZZ001M 1 meter OR-P1SF4ZRFZZZ001M 1 meter OR-P1SC4ZRRZZZ001M 1 meter

OR-P1SA4ZRFZZZ002M 2 meters OR-P1SF4ZRFZZZ002M 2 meters OR-P1SC4ZRRZZZ002M 2 meters

OR-P1SF4ZRGZZZ001M OR-P1SC4ZRSZZZ001M

6 CONNECTOR

PIGTAIL, LC-PC 6 FIBER

6 CONNECTOR

PIGTAIL, LC-PC 6 FIBER

6 CONNECTOR

PIGTAIL, LC-UPC 6 FIBER

OR-P1SA4ZRGZZZ001M 1 meter OR-P1SF4ZRGZZZ001M 1 meter OR-P1SC4ZRSZZZ001M 1 meter

OR-P1SA4ZRGZZZ002M 2 meters OR-P1SF4ZRGZZZ002M 2 meters OR-P1SC4ZRSZZZ002M 2 meters

Twelve Connector Pigtails

OR-P1TF4ZRFZZZ001M

OptiMo Multimode

(62.5/125) PC/OFNR

OptiMo Laser Optimized

(50/125) PC/OFNR

OptiMo Single-mode

UPC/OFNR

OR-P1TC4ZRRZZZ001M

12 CONNECTOR

PIGTAIL, SC-PC 12 FIBER

12 CONNECTOR

PIGTAIL, SC-PC 12 FIBER

12 CONNECTOR

PIGTAIL, SC-UPC 12 FIBER

OR-P1TA4ZRFZZZ001M 1 meter OR-P1TF4ZRFZZZ001M 1 meter OR-P1TC4ZRRZZZ001M 1 meter

OR-P1TA4ZRFZZZ002M 2 meters OR-P1TF4ZRFZZZ002M 2 meters OR-P1TC4ZRRZZZ002M 2 meters

OR-P1TF4ZRGZZZ001M OR-P1TC4ZRSZZZ001M

12 CONNECTOR

PIGTAIL, LC-PC 12 FIBER

12 CONNECTOR

PIGTAIL, LC-PC 12 FIBER

12 CONNECTOR

PIGTAIL, LC-UPC 12 FIBER

OR-P1TA4ZRGZZZ001M 1 meter OR-P1TF4ZRGZZZ001M 1 meter OR-P1TC4ZRSZZZ001M 1 meter

OR-P1TA4ZRGZZZ002M 2 meters OR-P1TF4ZRGZZZ002M 2 meters OR-P1TC4ZRSZZZ002M 2 meters

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

PATCH CORDS

Low Smoke Zero Halogen

Fiber Optic Cable Assemblies for

Standard Performance Systems

Six Connector Pigtails

OR-P1SF4ZRFZZZ001M

OptiMo Multimode

(62.5/125) PC/LSZH

OptiMo Laser Optimized

(50/125) PC/LSZH

OptiMo Single-mode

UPC/LSZH

OR-P1SC4ZRRZZZ001M

6 CONNECTOR

PIGTAIL, SC-PC 6 FIBER

6 CONNECTOR

PIGTAIL, SC-PC 6 FIBER

6 CONNECTOR

PIGTAIL, SC-UPC 6 FIBER

OR-P1SA4ZLFZZZ001M 1 meter OR-P1SF4ZLFZZZ001M 1 meter OR-P1SC4ZLRZZZ001M 1 meter

OR-P1SA4ZLFZZZ002M 2 meters OR-P1SF4ZLFZZZ002M 2 meters OR-P1SC4ZLRZZZ002M 2 meters

OR-P1SF4ZRGZZZ001M OR-P1SC4ZRSZZZ001M

6 CONNECTOR

PIGTAIL, LC-PC 6 FIBER

6 CONNECTOR

PIGTAIL, LC-PC 6 FIBER

6 CONNECTOR

PIGTAIL, LC-UPC 6 FIBER

OR-P1SA4ZLGZZZ001M 1 meter OR-P1SF4ZLGZZZ001M 1 meter OR-P1SC4ZLSZZZ001M 1 meter

OR-P1SA4ZLGZZZ002M 2 meters OR-P1SF4ZLGZZZ002M 2 meters OR-P1SC4ZLSZZZ002M 2 meters

Twelve Connector Pigtails

OR-P1SF4ZRFZZZ001M

OptiMo Multimode

(62.5/125) PC/LSZH

OptiMo Laser Optimized

(50/125) PC/LSZH

OptiMo Single-mode

UPC/LSZH

OR-P1SC4ZRRZZZ001M

12 CONNECTOR

PIGTAIL, SC-PC 12 FIBER

12 CONNECTOR

PIGTAIL, SC-PC 12 FIBER

12 CONNECTOR

PIGTAIL, SC-UPC 12 FIBER

OR-P1TA4FLFZZZ0001M 1 meter OR-P1TF4ZLFZZZ0001M 1 meter OR-P1TC4ZLRZZZ0001M 1 meter

OR-P1TA4FLFZZZ0002M 2 meters OR-P1TF4ZLFZZZ0002M 2 meters OR-P1TC4ZLRZZZ0002M 2 meters

OR-P1SF4ZRGZZZ001M OR-P1SC4ZRSZZZ001M

12 CONNECTOR

PIGTAIL, LC-PC 12 FIBER

12 CONNECTOR

PIGTAIL, LC-PC 12 FIBER

12 CONNECTOR

PIGTAIL, LC-UPC 12 FIBER

OR-P1TA4FLGZZZ0001M 1 meter OR-P1TF4ZLGZZZ0001M 1 meter OR-P1TC4ZLSZZZ0001M 1 meter

OR-P1TA4FLGZZZ0002M 2 meters OR-P1TF4ZLGZZZ0002M 2 meters OR-P1TC4ZLSZZZ0002M 2 meters

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 167

PATCH CORDS

Pre-Terminated Momentum ® Backbone Cables

Pre-Terminated MTP To MTP Multimode Momentum Backbone Cables

PART NO.

DESCRIPTION

OR-TOBPLAFFZAAxxxM

Plenum, 50 LMOF, OM#, no pins,

12-fibers, aqua, meters

OR-TOBPLAFFZAAxxxF

Plenum, 50 LMOF, OM#, no pins,

12-fibers, aqua, feet

OR-TOBLLAFFZAAxxxM

LSZH, 50 LMOF, OM#, no pins,

12-fibers, aqua, meters

OR-TOBLLAFFZAAxxxF

LSZH, 50 LMOF, OM#, no pins,

12-fibers, aqua, feet

Note: replace xxx with length in feet or meters (refer to F or M part number).

168 For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

PATCH CORDS

Pre-Terminated Momentum ® Backbone Cables

Pre-Terminated MTP To MTP Single-Mode Momentum Backbone Cables

PART NO.

DESCRIPTION

OR-TOBPIAFCZIIxxxM

Plenum, single-mode, OS2, no pins,

12-fibers, yellow, meters

OR-TOBPIAFCZIIxxxF

Plenum, single-mode, OS2, no pins,

12-fibers, yellow, feet

OR-TOBLIAFCZIIxxxM

LSZH, single-mode, OS2, no pins,

12-fibers, yellow, meters

OR-TOBLIAFCZIIxxxF

LSZH, single-mode, OS2, no pins,

12-fibers, yellow, feet

Note: replace xxx with length in feet or meters (refer to F or M part number).

Momentum Backbone cables can also be ordered in 62.5/125 and standard 50/125 optical fiber for legacy and low data rate applications. Please contact your Ortronics sales representative for assistance.

Harness

Ortronics ® harnesses are used to break out the MPO-fitted trunk cable into LC duplex connectors to plug directly into the active device. Each harness has a

12-fiber MTP*/MPO pinned (male) connector on one end and 6 duplex LC furcation tubes on the other. Each leg of the LC end can be either identical in length, or each leg can be staggered 30mm

(1.18˝) longer than the tube before it; another way to minimize and manage excess cable slack.

* MTP is a registered trademark of

UC Conec.

PART NO.

63900071-001

63900071-002

63900071-003

63900071-004

63900071-005

63900071-006

DESCRIPTION

Harness assembly, 12 fiber, MPO (M)/LC

Duplex, A-B, 50 LOMF, 2m

Harness assembly, 12 fiber, MPO (M)/LC

Duplex, A-B, 50 LOMF, staggered, 3m

Harness assembly, 12 fiber, MPO (M)/LC

Duplex, A-B, 50 LOMF, staggered, 4m

Harness assembly, 12 fiber, MPO (M)/LC

Duplex, A-A, 50 LOMF, 2m

Harness assembly, 12 fiber, MPO (M)/LC

Duplex, A-A, 50 LOMF, staggered, 3m

Harness assembly, 12 fiber, MPO (M)/LC

Duplex, A-A, 50 LOMF, staggered, 4m

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 169

FIELD-INSTALLABLE CONNECTORS

The most critical point in any optical interconnect is the physical contact interface between mated connector pairs. When polishing fiber connectors, a small lens is created at the tip of the connector and the shape of this lens critically impacts transmission of light.

Utilizing advanced laser interferometry equipment to monitor the manufacturing process, Ortronics ® OptiMo ® pre- polished field termination connectors exhibit highly controlled end-face geometry resulting in reliable, low insertion loss, minimal return loss connections. In addition, this approach eliminates imprecise epoxy application, time consuming curing, and highly variable hand polishing from field installation practices. The net effect is reduced installation expense, higher yield field terminations, and better performance.

Features n No epoxy, polishing, or fusion

splicing required n No special tools required n Fast installation n Factory prepared and verified end face n 62.5, 50 micron LOMF and single-mode versions available* n Unlimited shelf life

Benefits n Fast, easy assembly in the field n Common fiber tools, readily available n Cost savings n Reliability and superior performance n Flexibility for many installation applications n Ready when needed, reduced waste

* All 50/125 field-installable connectors are suitable for use with 10 Gigabit (10GBASE-SR applications and 10GFC) systems.

170 For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

FIELD-INSTALLABLE CONNECTORS

OptiMo ® Pre-Polished Connectors

OR-205KAS9GA-50T

LC Field-Installable,

50/125, 900 Micron Buffer

OptiMo 10Gb/s field-installable LC connector for use with 50 micron multimode fiber is suitable for

10 Gigabit applications. The OptiMo

10Gb/s technology incorporates a factory-bonded fiber stub, ceramic ferrule, and precise factory polish.

Designed for installation on 900 micron buffered fiber. Optional kits available for installation on 2.0 mm diameter jacketed cables (see OR-20500267).

PART NO.

DESCRIPTION

OR-205KAS9GA-50T Individually packaged

NOTE: All 50/125 field-installable connectors are suitable for use with

10 Gigabit (10GBASE-SR applications and 10GFC) systems.

OR-205KAS9GA-09

OR-205KAS9GA-62

LC Field-Installable,

Single-mode,

900 Micron Buffer

OptiMo field-installable LC connector for use with single-mode fiber incorporates a factory-bonded fiber stub, ceramic ferrule, and precise factory polish.

Designed for installation on 900 micron buffered fiber. Optional kits available for installation on 2.0 mm diameter jacketed cables (see OR-20500267).

PART NO.

DESCRIPTION

OR-205KAS9GA-09 Individually packaged

LC Field-Installable,

62.5/125, 900 Micron Buffer

OptiMo field-installable LC connector for use with 62.5 micron multimode fiber incorporates a factory-bonded fiber stub, ceramic ferrule, and precise factory polish.

Designed for installation on 900 micron buffered fiber. Optional kits available for installation on 2.0 mm diameter jacketed cables (see OR-20500267).

PART NO.

DESCRIPTION

OR-205KAS9GA-62 Individually packaged

OR-20500267

LC Accessory Kit for 2.0 mm and 3.0 mm

Jacketed Fiber

This is the Ortronics accessory kit for use when installing LC connectors on 2.0 mm or 3.0 mm jacketed cables. Kit includes two strain relief connector boots using flexible engineering rubber, 3.0 mm and

2.0 mm crimp rings.

PART NO.

OR-20500267

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

DESCRIPTION

LC accessory kit for 2.0 mm and

3.0 mm jacketed fiber

171

172

FIELD-INSTALLABLE CONNECTORS

OptiMo ® Pre-Polished Connectors

OR-205KAS9FA-50T

SC Field-Installable, 50/125,

900 Micron Buffer

OptiMo 10 Gb/s field-installable SC connector for use with 50 micron multimode fiber is suitable for 10 Gigabit applications. The OptiMo 10Gb/s technology incorporates a factory-bonded fiber stub, ceramic ferrule, and precise factory polish. Designed for installation on 900 micron buffered fiber. Optional kits available for installation on 2.4 to

3.0 mm diameter jacketed cables

(see OR-20500237).

PART NO.

DESCRIPTION

OR-205KAS9FA-50T Individually packaged

NOTE: All 50/125 field-installable connectors are suitable for use with

10 Gigabit (10GBASE-SR Applications and 10GFC) systems.

OR-205KAS9FA-09

OR-205KAS9FA-62

SC Field-Installable, Singlemode, 900 Micron Buffer

OptiMo field-installable SC connector for use with single-mode fiber. The OptiMo technology incorporates a factory-bonded fiber stub, ceramic ferrule, and precise factory polish. Designed for installation on 900 micron buffered fiber. Optional kits are available for installation on 2.4 to 3.0 mm diameter jacketed cables

(see OR-20500237).

PART NO.

OR-205KAS9FA-09

DESCRIPTION

Individually packaged

SC Field-Installable,

62.5/125, 900 Micron Buffer

OptiMo field-installable SC connector for use with 62.5 micron multimode fiber incorporates a factory-bonded fiber stub, ceramic ferrule, and precise factory polish. Designed for installation on 900 micron buffered fiber. Optional kits available for installation on 2.4 to

3.0 mm diameter jacketed cables

(see OR-20500237).

PART NO.

OR-205KAS9FA-62

DESCRIPTION

Individually packaged

OR-20500237

SC Accessory Kit for 2.4 and 3.0 mm Jacketed Fiber

Ortronics accessory kit for use in installing SC connectors on 2.4 to 3.0 mm jacketed cables. Kit includes strain relief connector boot using flexible engineering rubber, a cord adapter, a 2.4 mm crimp ring, and a 3.0 mm crimp ring.

PART NO.

OR-20500237

DESCRIPTION

Optional strain relief boot accessory kit for use in installing SC connectors on 2.4 and 3.0 mm jacketed cables

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

FIELD-INSTALLABLE CONNECTORS

OptiMo ® Pre-Polished Connectors

OR-205KAS9EA-50T

ST Field-Installable,

50/125, 900 Micron Buffer

OptiMo 10Gb/s field-installable ST connector for use with 50 micron multimode fiber is suitable for 10 Gigabit applications. The OptiMo 10Gb/s technology incorporates a factory-bonded fiber stub, ceramic ferrule, and precision factory polish. Designed for installation on

900 micron buffered fiber. Optional kits are available for installation on 2.4 to

3.0 mm diameter jacketed cables

(see OR-20500236).

PART NO.

DESCRIPTION

OR-205KAS9EA-50T Individually packaged

NOTE: All 50/125 field-installable connectors are suitable for use with

10 Gigabit (10GBASE-SR applications and 10GFC) systems.

OR-205KAS9EA-62

ST Field-Installable,

62.5, 900 Micron Buffer

OptiMo field-installable ST connector for use with 62.5 micron multimode fiber incorporates a factory-bonded fiber stub, ceramic ferrule, and precise factory polish.

Designed for installation on 900 micron buffered fiber. Optional kits are available for installation on 2.4 to 3.0 mm diameter jacketed cables (see OR-20500236).

PART NO.

OR-205KAS9EA-62

DESCRIPTION

Individually packaged

OR-205KAS9EA-09

ST Field-Installable, Singlemode, 900 Micron Buffer

OptiMo field-installable ST connector for use with single-mode fiber incorporates a factory-bonded fiber stub, ceramic ferrule, and precise factory polish. Designed for installation on 900 micron buffered fiber.

Optional kits are available for installation on 2.4 to 3.0 mm diameter jacketed cables (see OR-20500236).

PART NO.

OR-205KAS9EA-09

DESCRIPTION

Individually packaged

OR-20500236

ST Accessory Kit for 2.4 and 3.0 mm Jacketed Fiber

Ortronics accessory kit for use in installing

ST connectors on 2.4 to 3.0 mm jacketed cables. Kit includes strain relief connector boot using flexible engineering rubber, a 2.4 mm crimp ring, and a 3.0 mm crimp ring.

PART NO.

OR-20500236

DESCRIPTION

Optional strain relief boot accessory kit for use in installing ST connectors on 2.4 and 3.0 mm jacketed cables.

Package of 25

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 173

174

FIELD-INSTALLABLE CONNECTORS

OptiMo ® Pre-Polished Connectors

Tools & Kits

With any tool kits, components get lost or worn out over time. To accommodate replenishment needs, Ortronics ® offers a complete range of high quality accessory components supporting the OptiMo ® field termination system. From cleaning supplies to cleavers, microscopes, instruction sheets, fiber strip and crimp tools, Ortronics has the components to meet a range of needs and keep installations moving forward.

OR-854B00000-1

Complete OptiMo

Termination Kit

Ortronics complete OptiMo Termination

Kit for installing ST, SC and LC type connectors. Kit includes universal installation tool, fiber cleaver, crimping tool, instruction manual, fiber preparation guide, microscope, alcohol wipes, felt tipped marker, scissors, tweezers, waste container and one fiber/cable stripper.

PART NO.

OR-854B00000-1

DESCRIPTION

Complete OptiMo termination kit

OR-61500858

OptiMo Breakout Kits

To be used with loose tube cables.

PART NO.

OR-61500858

OR-61500868

DESCRIPTION

Breakout kit, 12 fiber

Breakout kit, 6 fiber

OR-61500868

OR-60300203

OR-60300204

OptiMo Universal

Connector Installation Tool

PART NO.

OR-60300203

DESCRIPTION

Includes one clamp and tool compatible with OptiMo LC, SC and

ST connectors

Table Top Stand

PART NO.

OR-60300204

DESCRIPTION

One table top stand for installation tool

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

FIELD-INSTALLABLE CONNECTORS

OptiMo ® Pre-Polished Connectors

Tools & Kits

Precision Fiber Cleave Tool

OR-60300210 PART NO.

OR-60300210

DESCRIPTION

Precision cleaver

Fiber Cleave Tool

OR-60300123 PART NO.

OR-60300123

DESCRIPTION

Cleaver with preset stop

Microscope

OR-60300128 PART NO.

OR-60300128

DESCRIPTION

Cleave inspection microscope (100x)

OptiMo Crimp Tool with Die

OR-60300125 PART NO.

OR-60300125

DESCRIPTION

Crimp Tool with Die

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 175

FIELD-INSTALLABLE CONNECTORS

OptiMo ® Pre-Polished Connectors

Tools & Kits

Strip Tools

OR-60300124 OR-60300127 OR-60300205 PART NO.

OR-60300124

OR-60300127

OR-60300205

DESCRIPTION

Miller ® style

Nick-free style

Universal jacket/buffer

Alcohol Wipes

PART NO.

OR-854A00001

DESCRIPTION

80 alcohol wipes and felt tipped marker

OptiMo Installation Instruction Manual

PART NO.

OR-71601671

DESCRIPTION

Compatible with LC, SC and ST

176 For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

FIELD-INSTALLABLE CONNECTORS

OptiMo ® Field-Installable Anaerobic Connectors

OptiMo quick-cure, anaerobic epoxy field- installable connectors speed installation time.

Strip the fiber, inject the adhesive into the connector, insert and scribe the fiber, then polish the connector end face to perfection for a high performance termination. Users and installers will benefit from high productivity and low connector costs — which translates directly into savings.

Features Benefits n n n

Simple design

No capital equipment

Minimal tools n Allows for lower unit costs. Advanced engineering helps us ensure long life and saves replacement costs.

n With OptiMo field polish connectors, there is no need for curing ovens, UV light sources, or expensive polishing machines. It is possible to terminate anywhere without worrying about power sources or charging batteries.

n Fast application n Terminate fibers in about two minutes following the easy installation instructions, saving on installation time.

n Precision ceramic ferrule n Provides durability, temperature stability and scratch resistance.

n Single-mode or multimode n Pre-radius LC n Simplistic offering reduces confusion by offering one style connector that covers all multimode applications to include

62.5µm, standard 50µm, or laser optimized 50µm for

10 Gigabit transmission, and single-mode.

n One-piece pre-radius LC connector for minimal polishing and consistent end-face geometry resulting in more consistent optical performance.

n Reliable performance n Secure the installation of fiber using an adhesive and primer for a secure worry-free termination.

n A compact and economical tool kit contains all the common tools necessary to complete the termination.

Anaerobic Adhesive Connectors

OR-205KAN9GA-MM OR-205KAN9GA-SM

OR-205KAN9FA-MM

OR-205KAN9FA-SM

PART NO./SINGLE

OR-205KAN9GA-MM

OR-205KAN9GA-SM

OR-205KAN9FA-MM

OR-205KAN9FA-SM

OR-205KAN9EA-MM

OR-205KAN9EA-SM

DESCRIPTION

LC, multimode, buffer size (µm) 900

LC, single-mode, buffer size (µm) 900

SC, multimode, buffer size (µm) 900

SC, single-mode, buffer size (µm) 900

ST, multimode, buffer size (µm) 900

ST, single-mode, buffer size (µm) 900

OR-205KAN9EA-MM OR-205KAN9EA-SM

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 177

178

FIELD-INSTALLABLE CONNECTORS

OptiMo ® Field-Installable Anaerobic Connectors

Anaerobic Field Installable Connector Termination Kit

OR-85400010 PART NO.

OR-85400010

DESCRIPTION

Contains all tools necessary for complete

OptiMo LC, ST and SC anaerobic terminations: contractor bag, micro strip tool, scribe tool, jacket strip tool, scissors, cut length templates, polishing pad, polishing pucks, microscope

NOTE: Consumables: polishing paper, adhesive and primer are sold separately.

Anaerobic Field Installable Connector Multimode Polishing Kit

OR-85400012 PART NO.

OR-85400012

DESCRIPTION

Consumables necessary for complete

OptiMo LC, ST and SC terminations: dry wipes, dispensing tips, syringe, type G polishing paper, type F polishing paper (terminates approx.

100 connectors)

Anaerobic Field Installable Connector Single-Mode Polishing Kit

OR-85400011 PART NO.

DESCRIPTION

OR-85400011

Consumables necessary for complete

OptiMo LC, ST and SC terminations: dry wipes, dispensing tips, syringe, type G polishing paper, type F polishing paper, type M polishing paper

(terminates approx. 100 connectors)

Individual Tools and Accessory Items (Anaerobic)

OR-70600021 OR-70600022 OR-60300200

OR-60300179

OR-60300184

OR-60300182

OR-60300185

OR-60300183

OR-60300186

PART NO.

DESCRIPTION

OR-70600021 Adhesive

OR-70600022 Primer

OR-60300200

LC stainless polishing puck also suitable for Keyed LC connector

OR-60300179 Package of 250 dry wipes

OR-60300182 Dispensing tips, package of 125

OR-60300183 Syringe, package of 10

OR-60300184

Type M polishing paper, package of

10 sheets, SM only

OR-60300185 Type F polishing paper, package of 10 sheets

OR-60300186 Type G polishing paper, package of 20 sheets

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

WORKSTATION SYSTEMS

Fib-or-Cop II

Fib-or-Cop II provides greater multimedia capacity, addressing the increasing need for fiber in horizontal cabling systems. This larger version of the Fib-or-Cop has the ability to mount six TracJack ® modules in the face, with a choice of fiber (LC, SC, ST or MT-RJ) and/or copper (TracJack) exiting from the bottom. This design allows the cover to be removed without disrupting the connections in the face-plate. The wide variety of connectors located in the bottom positions can be further protected by an optional snap-on shroud.

In addition, the Ortronics line of workstation solutions offers many alternative designs to accommodate multimedia needs for in-wall and surface mount installations.

Fib-or-Cop II

OR-62100041 PART NO.

OR-62100041

DESCRIPTION

Base and cover for six TracJack modules,

5˝ x 8˝ x 1.19˝

Fib-or-Cop II Protective Bottom Shroud

OR-62100038 PART NO.

DESCRIPTION

OR-62100038 Package of five protective bottom shrouds

Fib-or-Cop II Bottom Adapter Plates

OR-62100044 OR-62100046 OR-62100048

OR-62100050 OR-62100052

PART NO.

OR-62100044

OR-62100045

OR-62100046

OR-62100047

OR-62100048

OR-62100049

OR-62100050

OR-62100051

OR-62100052

OR-62100053

OR-62100054

DESCRIPTION

3-ST duplex (6 fibers) multimode, beige adapters, phosphor-bronze alignment sleeves

3-ST duplex (6 fibers) single-mode, blue adapters, ceramic alignment sleeves

6-SC simplex (6 fibers) multimode, beige adapters, phosphor-bronze alignment sleeves

6-SC simplex (6 fibers) single-mode, blue adapters, ceramic alignment sleeves

3-SC duplex (6 fibers) multimode, beige adapters, phosphor-bronze alignment sleeves

3-SC duplex (6 fibers) single-mode, blue adapters, ceramic alignment sleeves

6-LC duplex (12 fibers) multimode, beige adapters, phosphor-bronze alignment sleeves

6-LC duplex (12 fibers) single-mode, blue adapters, ceramic alignment sleeves

6-MT-RJ (12 fibers) feed-through multimode, beige adapters

6-MT-RJ (12 fibers) single-mode, blue adapters

4-LC quad, 50 LOMF, aqua adapters

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 179

WORKSTATION SYSTEMS

TracJack ® Modules & Faceplates

TracJack Faceplates

OR-40300549 OR-40300548 OR-40300547

OR-40300546

OR-40300555

OR-40300545 OR-40300554

PART NO.

OR-40300549

OR-40300548

OR-40300547

OR-40300546

OR-40300545

OR-40300554

OR-40300555

DESCRIPTION

Single gang plastic, holds one TracJack,

2.75˝ x 4.5˝, fog white

Single gang plastic, holds two TracJacks,

2.75˝ x 4.5˝, fog white

Single gang plastic, holds three TracJacks,

2.75˝ x 4.5˝, fog white

Single gang plastic, holds four TracJacks,

2.75˝ x 4.5˝, fog white

Single gang plastic, holds six TracJacks,

2.75˝ x 4.5˝, fog white

Dual gang plastic, holds eight TracJacks,

4.5˝ x 4.5˝, fog white

Dual gang plastic, holds six TracJacks,

4.5˝ x 4.5˝, fog white

NOTE: Not compatible with the following faceplates:

OR-40300554, OR-40300620

NOTE: Standard color for plastic TracJack faceplates is fog white. For electrical ivory add -13, for white add -88 and for Wiremold® ivory add -99 to end of part number. For other colors, contact sales.

TracJack Surface Mount Boxes

OR-404TJ4 OR-404TJ6 PART NO.

OR-404TJ2X2

OR-404TJ6

DESCRIPTION

Holds four TracJacks, jacks exit from both sides,

4.0˝ x 2.42˝ x 1.16˝

Holds six TracJacks, 6.98˝ x 4.33˝ x 1.16˝ Includes internal storage ring for fiber and two TracJack blanks. Can mount directly to single or double gang recessed wall boxes.

180

Surface Mount Outlet Boxes for TracJack

OR-40300185 OR-40300186 PART NO.

DESCRIPTION

OR-40300185* Single-gang, 3˝ x 4.7˝ x 2˝

OR-40300186 Double-gang, 4.9˝ x 4.7˝ x 2˝

NOTE: Compatible with Wiremold ® 2700, 2800 and 2900 Raceway Series.

Optional Accessories

PART NO.

DESCRIPTION

OR-70900020 Adhesive-back magnet for single-gang

OR-70900022 Adhesive-back magnet for double-gang

OR-70900070

Double-sided adhesive

(order two for a double-gang)

NOTE: Compatible with Wiremold ® 2700, 2800 and 2900 Raceway Series.

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895

WORKSTATION SYSTEMS

TracJack ® Modules & Faceplates

TracJack Modules

TracJack is a versatile single-module solution—the perfect combination of high quality, enhanced performance, labor savings, ease of use, and flexibility in design.

TracJack front removable snap-in modules make moves, adds, and changes easy.

TracJack products are compatible with Fib-or-Cop II and the complete line of

TracJack faceplates and surface mount boxes. TracJack modules are available in

LC, SC, ST, FC, and MT-RJ styles in order to suit any installation requirement.

Features Benefits n Snap-in module n Modular design n Front removable n No special tools required n n n n

Simple, secure installation

Flexibility in structured cabling system design

Facilitates quick moves, adds, and changes

Reduced installation expense n Fully compatible with all TracJack faceplates n Provides wide range of design possibilities

TracJack Modules

OR-63700039* OR-63700050 OR-63700075*

OR-63700017*

OR-63700078*

OR-63700026

OR-63700081

OR-63700066*

OR-63700011

OR-63700048

OR-63700082

OR-63700051

OR-63700013

OR-63700080

PART NO.

OR-63700039*

OR-63700050

OR-63700075*

OR-63700017*

OR-63700066*

OR-63700051

OR-63700078*

OR-63700011

OR-63700013

OR-63700026

OR-63700048

OR-63700080

OR-63700081

OR-63700082

DESCRIPTION

1-LC (2 fibers) multimode, beige adapter, phosphorbronze alignment sleeves, 180° exit, flush, 1 unit

1-LC (2 fibers) multimode, beige adapter, phosphorbronze alignment sleeves, 45° angled exit, 2 units

1-LC (2 fibers) multimode, aqua adapter, ceramic alignment sleeves, 180º exit, flush, 1 unit

1-SC simplex multimode, beige adapter, phosphorbronze alignment sleeves, 180° exit, flush, 1 unit

2-SC simplex multimode, beige adapters, phosphorbronze alignment sleeves, 180° exit, 1 unit

1-SC simplex multimode, beige adapter, phosphorbronze alignment sleeves, 45° angled exit, flush, 2 units

1-SC simplex multimode, aqua adapter, ceramic alignment sleeve, 180º exit, flush, 1 unit

1-ST simplex multimode, metal adapter, phosphor-bronze alignment sleeves, 180° exit, 1 unit

2-ST multimode, metal adapter, phosphor-bronze alignment sleeves, 180° exit, 1 unit

1-MT-RJ (2 fibers) feed-through, multimode, beige adapter, 180° exit, flush, 1 unit

1-MT-RJ (2 fibers) feed-through, multimode, beige adapter, 45° angled exit, 2 units

1-LC (2 fibers) multimode, aqua adapter, ceramic alignment sleeves, 45° angled exit, 2 units

2-SC simplex multimode, aqua adapters, ceramic alignment sleeves, 180° exit, 1 unit

1-SC simplex multimode, aqua adapter, ceramic alignment sleeves, 45° angled exit, 2 units

NOTE: Consult sales at 800-934-5432 for single-mode part numbers.

* Also available in black, red, orange, yellow, green, light green, WM light gray, WM gray, white and WM ivory. housing colors: -00, -25, -42, -43, -44, -45, -68, -78, -88, -99

For additional product availability visit www.ortronics.com or contact sales at 860-405-2895 181

Europe/Middle East/Africa

Great King Street North

Birmingham, B19 2LF

United Kingdom

Phone: +44.01215.150.669

Fax: +44.01215.150.667

Latin America Headquarters

Montes Urales NO. 715 3er Piso

Col. Lomas de Chapultepec

MEXICO D.F. - C.P. 11000

Phone: +52.55.5201.6450

Asia Pacific Headquarters

125 Eugene O’Neill Drive

New London, CT 06320

Phone: 860.445.3900

Fax: 860.405.2992

Global Headquarters

125 Eugene O’Neill Drive

New London, CT 06320

Phone: 800.934.5432 or 860.445.3900

Fax: 860.405.2992 www.ortronics.com

Ciao! Sono un chatbot AI specificamente addestrato per assisterti con il Ortronics OR-OFP-BLANK Scheda dati. Ho esaminato attentamente il documento e posso aiutarti a individuare le informazioni di cui hai bisogno o spiegare il contenuto in termini chiari e semplici. Che tu stia cercando indicazioni su funzionalità specifiche, passaggi per la risoluzione dei problemi o l'uso generale, non esitare a fare domande. Più dettagli fornisci sulle tue esigenze o dubbi, più accuratamente e efficacemente potrò aiutarti!

L''assistente sta scrivendo

L''assistente non è disponibile. Riprova più tardi.