advertisement
020106
Stud wall
Wall board
3"
(76mm)
1 15/16"
(49mm)
Erv30, Erv36, Erv48
Prv30, Prv36, Prv46
30”, 36”, 46”, 48” wide, slim raised vent
Exhaust
Duct
1/1
3" (8mm)
PLANNING
GUIDE
6"
(152mm) Motor Cover
3/4" (19mm)
3/4" (19mm) Max. backsplash thickness
1/4" (6mm) Min. flat area
Support Channel
CL
CL of ERV/PRV of 1 5/8" x 16" Duct Exhaust boTTom vIEw
9/32" (7mm)
2 13/16"
(71mm)
Cooktop/Range
7/16"
(11mm)
2 1/8" (54mm)
PRV Dimensions
2 1/8" (54mm)
ERV Dimensions
ToP CAP DImENsIoNs
3/8"
(10mm)
“A”
10"
(254mm)
Countertop
Stiffener
1 5/8" x 16"
Exhaust duct
3 1/4" x 10"
Exhaust duct
6 5/8”
(168mm)
“B”
3/4"
18 13/16”
(478mm)
3 3/4"
(95mm)
(19mm)
1 5/8" x 16"
Exhaust duct
1 5/8" x 16"
Exhaust duct
30"
(762mm)
25 7/8"
(657mm)
Finished floor
3 1/4" x 10"
Rear
Exhaust duct
6"
(152mm)
Motor cover
4"
(102mm)
ATD2
Electrical access panel
1 5/8" x 16"
Exhaust duct
48", 3 prong grounded power cord
8 1/2"
(216mm)
Model
No.
ERV30
ERV36
ERV48
PRV30
PRV36
PRV46
“A” Overall Width “B” Chassis Width
30” (762mm) 27 3/8” (695mm)
36” (914mm)
48” (1219mm)
33 3/8” (848mm)
43 3/8” (1102mm)
30” (762mm)
36” (914mm)
46” (1168mm)
27 3/8” (695mm)
33 3/8” (848mm)
43 3/8” (1102mm)
Erv/Prv ovErALL DImENsIoNs
Approximate
Shipping Weight
48 lbs.
55 lbs.
69 lbs.
50 lbs.
57 lbs.
67 lbs.
NOTES:
1. The Dacor custom transition ATD2 ships with each
ERV and is used for the left, right or down ducting options. Rear ducting is designed for 3 1/4” x 10” rectangular duct.
2. The ATD2 transitions are equivalent to 4 straight feet.
3. It may be necessary to route or remove the cabinet back if the minimum interior depth cannot be met.
Web: http://www.Dacor.com
Corporate Phone: 800-793-0093
Specifications are subject to change without notice.
See installation instructions for additional details.
8.1
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project