Datalogic Touch Light 65, 90 barcode reader Quick reference guide

CONNECTIONS
Datalogic Scanning, Inc.
959 Terry Street
Eugene, Oregon 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the
procedures described therein may be reproduced or transmitted in any form or by any means
without prior written per-mission of Datalogic Scanning, Inc. or its subsidiaries or affiliates
("Datalogic" or “Datalogic Scanning”). Owners of Datalogic products are hereby granted a nonexclusive, revocable license to reproduce and transmit this documentation for the purchaser's own
internal business purposes. Purchaser shall not remove or alter any proprietary notices, including
copyright notices, contained in this documentation and shall ensure that all notices appear on any
reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by
contacting your Datalogic representative. Electronic versions may either be downloadable from
the Datalogic website (www.scanning.datalogic.com) or provided on appropriate media. If you visit
our website and would like to make comments or suggestions about this or other Datalogic
publications, please let us know via the "Contact Datalogic" page.
Touch™ 65/90 Light
DISCONNECTING THE CABLE
USB
CONTACT READERS
DISCLAIMER
WEDGE
Datalogic has taken reasonable measures to provide information in this manual that is complete
and accurate, however, Datalogic reserves the right to change any specification at any time
without prior notice. Datalogic is a registered trademark of Datalogic S.p.A. in many countries and
the Datalogic logo is a trademark of Datalogic S.p.A. all licensed to Datalogic Scanning, Inc. All
other trademarks and trade names referred to herein are property of their respective owners.
USING TOUCH™ LIGHT SERIES READERS
SERVICE AND SUPPORT
Datalogic provides several services as well as technical support through its website. Log on to
www.scanning.datalogic.com and click on the links indicated for further information including:
·
PRODUCTS
Search through the links to arrive at your product page where you can download specific
Manuals and Software & Utilities including:
Datalogic Aladdin™, a multi-platform utility program that allows device configuration
using a PC. It provides RS-232 interface configuration as well as configuration barcode
printing.
·
SERVICE & SUPPORT
- Technical Support - Product documentation and programming guides and Technical
Support Department in the world
- Service Programs - Warranty Extensions and Maintenance Agreements
- Repair Services - Flat Rate Repairs and Return Material Authorization (RMA) Repairs.
·
scanning line
QUICK REFERENCE GUIDE
- Downloads – Manuals & Documentation, Data Sheets, Product Catalogues, etc.
CONTACT US
Information Request Form and Sales & Service Network
trigger button
RS-232
Prior to connection, verify that your connection cable
matches your Touch™ Light interface model (see product
label). Avoid connecting interface cables, which are not
compatible with your Touch™ Light model.
NOTE
©2012 Datalogic Scanning, Inc.
820049814 (Rev. C)
Touch™ Light readers scan barcodes on contact. All models have a hardware
trigger button which by default must be pressed to read a code. After configuring the
reader interface type, the software trigger parameter (available in this manual) can
be selected so that the reader operates like a model without trigger.
Barcode scanning is performed along an imaginary line passing across the reading
window. This imaginary line must pass through the entire barcode.
Successful scanning is obtained by keeping the handle of the reader parallel with
respect to the code surface, see the figure above.
June 2012
DECLARATION OF CONFORMITY
COMPLIANCE
Datalogic Scanning, Inc.
959 Terry Street
Eugene, OR 97402
USA
Class 1 LED product.
07
This product conforms to EN60825-1:2001.
dichiara che
declares that the
déclare que le
bescheinigt, daß das Gerät
declare que el
(WEEE) Statement
Modifications or changes to this equipment without the expressed written approval
of Datalogic could void the authority to use the equipment.
This device complies with PART 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference which
may cause undesired operation.
e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
e
and
et
und
y
92/31/EEC, 93/68/EEC
emendamenti successivi
further amendments
ses successifs amendements
späteren Abänderungen
succesivas enmiendas
Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza
dei prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and product
safety.
Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité
des produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit
und Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad
electromagnética y las Medidas de seguridad relativas al producto.
EN 55022 (CLASS B ITE), AUGUST 1994:
AMENDMENT A1 (CLASS B ITE), OCTOBER 2000:
LIMITS AND METHODS OF MEASUREMENTS OF RADIO
EN 55024, SEPTEMBER 1998:
TECHNOLOGY
CHARACTERISTICS.
LIMITS
DISTURBANCE OF INFORMATION TECHNOLOGY EQUIPMENT
INFORMATION
MEASUREMENTS
EQUIPMENT.
AND
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
POWER SUPPLY
This device is intended to be connected to a UL Listed/CSA Certified computer
which supplies power directly to the reader or else be supplied by a UL Listed/CSA
Certified Power Unit marked “Class 2” or LPS power source rated 5 V, minimum
150 mA, which supplies power directly to the reader via the power connector of the
cable.
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con la siguientes normas:
March 1st, 2007
Waste Electrical and Electronic Equipment
FCC COMPLIANCE
Touch 65
Touch 90
89/336/EEC EMC Directive
WEEE COMPLIANCE
LED CLASS
IMMUNITY
METHODS
OF
PATENTS
English
For information about the disposal of Waste Electrical and Electronic Equipment
(WEEE), please refer to the website at www.scanning.datalogic.com.
Italian
Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche
consultare il sito Web www.scanning.datalogic.com.
French
Pour toute information relative à l’élimination des déchets électroniques (WEEE),
veuillez consulter le site Internet www.scanning.datalogic.com.
German
Informationen zur Entsorgung von Elektro- und Elektronik- Altgeräten (WEEE)
erhalten Sie auf der Webseite www.scanning.datalogic.com.
Spanish
Si desea información acerca de los procedimientos para el desecho de los residuos
del equipo eléctrico y electrónico (WEEE), visite la página Web
www.scanning.datalogic.com.
Portuguese
Para informações sobre a disposição de Sucatagem de Equipamentos Eléctricos e
Eletrônicos (WEEE - Waste Electrical and Electronic Equipment), consultar o site
web www.scanning.datalogic.com.
This product is licensed under the following U.S. patent: 6,158,661
This product is covered by one or more of the following patents:
U.S. patents 5,917,176; 5,992,740; 6,010,073; 6,305,606 B1; 6,517,003 B2; and
6,712,271 B2
Chinese
European patents 789,315 B1; 822,508 B1; 829,814 B1; 851,378 B1; 895,175 B1;
and 1,205,871 B1
Additional patents pending.
廃電気電子機器(ＷＥＥＥ)の処理についての関連事項はDatalogicのサイト
www.scanning.datalogic.com, をご参照下さい。
有关处理废弃电气电子设备
(WEEE)的信息，
http://www.scanning.datalogic.com/。
请参考Datalogic公司的网站：
Japanese
RESTORE DEFAULT
DEFAULT VALUES
RESTORE DEFAULT
USB-KBD DEFAULT SETTINGS
USA keyboard, FIFO enabled, inter-character and inter-code delays disabled,
con rol character emulation = ctrl+shift+key.
DATA FORMAT:
code identifier disabled, no field adjustment, code length not
transmitted, no header, terminator = ENTER, character replacement disabled.
Ì$+$*oÎ
KEYBOARD NATIONALITY
TRIGGER SELECTION
USB-KBD and Wedge users should select one of the following wedge keyboard
nationality codes according to your keyboard.
After configuring the reader interface type, the software trigger parameter can be
selected so that the reader operates like a model without trigger.
Belge
To change the defaults refer to the HHD II Software Configuration Manual, or to the
DL Sm@rtSet™ Configuration program, both downloadable from the website.
Ì$+FJ7$-8Î
Software Trigger
RS-232 Standard DEFAULT SETTINGS
9600 baud, no parity, 8 data bits, 1 stop bit, no handshaking, delay disabled, rx
timeout 5 sec., ack/nack disabled, FIFO enabled, serial trigger lock disabled.
DATA FORMAT:
code identifier disabled, no field adjustment, code length not
transmitted, no header, terminator = CR-LF, character replacement disabled.
WEDGE DEFAULT SETTINGS
USA keyboard, caps lock off, caps lock auto-recognition enabled, num lock
unchanged, inter-character and inter-code delays disabled, control character
emulation = ctrl+shift+key.
DATA FORMAT:
code identifier disabled, no field adjustment, code length not
transmitted, no header, terminator = ENTER, character replacement disable.
Select one of the interface codes according to your application.
USB INTERFACE SELECTION


English
Ì$+FJ4$-)Î
 Hardware Trigger
Ì$+FJ6$-3Î
Ì$+UA03$-:Î
DATALOGIC SCANNING LIMITED FACTORY WARRANTY
Français
USB-KBD - ALT-mode
Ì$+UA04$-@Î
Warranty Coverage
Ì$+FJ2$-ÊÎ
Datalogic warranties this product against defects in workmanship and materials, for a period of 5 years
from the date of shipment, provided that the product is operated under normal and proper conditions.
Italiano
EAN 8/EAN 13 / UPC A/UPC E without ADD ON
check digit transmitted, no conversions
Interleaved 2/5
check digit control and transmission, variable length code; 4-99 characters
Ì$+FJ1$-ÅÎ
USB-COM *
Ì$+UA02$-4Î
Japanese
Standard Code 39
no check digit control, variable length code; 1-99 characters
Ì$+FJ8$-=Î
Code 128
variable length code; 1-99 characters
USB-IBM-Hand Held
Svenskt
Ì$+UA01$-.Î
Disabled codes
EAN 128, ISBT128, Code 93, Codabar, pharmaceutical codes, MSI,
Plessey, Telepen, Delta IBM, Code 11, Code 16K, Code 49, RSS Codes
* When configuring USB-COM, the relevant files and drivers must be installed from
the USB Device Installation software, which can be downloaded from the web site
http://www.scanning.datalogic.com.
Ì$+FJ5$-.Î
USA (Default)
Ì$+FJ0$-|Î
RS-232 INTERFACE SELECTION
RS-232 Standard
Power Supply
RS-232 interface
Consumption:
Maximum
Operating
Sleep mode &
USB Suspend Mode
Max. Scan
5 Vdc  5%
150 mA @ 5 Vdc
100 mA @ 5 Vdc
< 500 A @ 5
c
ate
Nixdorf Mode A
Ì$+CM2EC0$->Î
Fujitsu
LED, Beeper
Touch™ 65 Light
Reading Field
80 mm typical
Max. Resolution
0.10 mm
(4 mils)
0.13 mm
(5 mils)
PCS
min. 25% (Datalogic Test Chart)
0 to +55 C / 32° to 131 °F
Storage Temperature
-20 to +70 C / -4° to 158 °F
90% non condensing
Drop Resistance
1.2 m (3 ft 9 in)
ESD Protection
16 KV
Protection Class
IP30
Ì$+EA1184$-8Î
(iv) .... any claimed defect or damage caused by the failure to provide proper maintenance, including but
not limited to cleaning the upper window in accordance with product manual;
(vi) .... any damage or malfunctioning caused by non-restoring action as for example firmware or
software upgrades, software or hardware reconfigurations etc.;
Ì$+CP505$-ÈÎ
None
Ì$+EA10$-dÎ
PC Notebook - ALT mode
Ì$+CP508$-2Î
IBM AT - ALT mode
Ì$+CP507$-+Î
OPERATING TEST
Read the TEST code below.
Many other interfaces are supported and can be selected from the HHD II Software
Configuration Manual available online at www.scanning.datalogic.com. Other
supported interfaces:
Code 128
No Assignment
Customer may not assign or otherwise transfer its rights or obligations under this warranty except to a
purchaser or transferee of product. No attempted assignment or transfer in violation of this provision shall
be valid or binding upon Datalogic.
Risk of Loss
USB: USB-IBM-Table Top; USB-KBD-APPLE
WEDGE: IBM XT; IBM SURE1; IBM Terminal 3153; IBM Terminals 31xx, 32xx,
34xx, 37xx; Wyse Terminals ANSI – PC –ASCII – VT220 style Keyboards; Digital
Terminal VT2xx/VT3xx/VT4xx; APPLE ADB Bus
(viii) ... any consumable or equivalent (e.g., cables, power supply, batteries, keypads, touch screen,
triggers etc.).
DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION,
ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR
NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIABLE FOR ANY DAMAGES SUSTAINED BY
CUSTOMER ARISING FROM DELAYS IN THE REPLACEMENT OR REPAIR OF PRODUCTS UNDER
THE ABOVE. THE REMEDY SET FORTH IN THIS WARRANTY STATEMENT IS THE CUSTOMER'S
SOLE AND EXCLUSIVE REMEDY FOR WARRANTY CLAIMS. UNDER NO CIRCUMSTANCES WILL
DATALOGIC BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY
INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT DAMAGES REGARDLESS
OF WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
about 195 g (6.8 oz)
2 m (6 ft 6 in)
(iii)..... any claimed defect or damage caused by the use of product with any other instrument,
equipment or apparatus;
(vii).... the replacement of upper window/cartridge due to scratching, stains or other degradation and/or
Mechanical Features
about 160 g (5.6 oz)
(ii) ..... any claimed defect, failure or damage which Datalogic determines was caused by faulty
operations, improper use, abuse, misuse, wear and tear, negligence, improper storage or use of
parts or accessories not approved or supplied by Datalogic;
(v) ..... any defect or damage caused by natural or man-made disaster such as but not limited to fire,
water damage, floods, other natural disasters, vandalism or abusive events that would cause
internal and external component damage or destruction of the whole unit, consumable items;
PC Notebook
Working Temperature
Cable Length
Ì$+EA1183$-0Î
Tab
Ì$+CP500$-aÎ
Environmental Features
Weight (without cable)
Enter
WEDGE INTERFACE SELECTION
Wedge IBM AT or PS/2 PCs
In order to obtain service under the Factory Warranty, Customer must notify Datalogic of the claimed defect
before the expiration of the applicable Warranty period and obtain from Datalogic a return authorization
number (RMA) for return of the product to a designated Datalogic service center. If Datalogic determines
Customer's claim is valid, Datalogic will repair or replace product without additional charge for parts and
labor. Customer shall be responsible for packaging and shipping the product to the designated Datalogic
service center, with shipping charges prepaid. Datalogic shall pay for the return of the product to Customer
if the shipment is to a location within the country in which the Datalogic service center is located. Customer
shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products
returned to any other locations. Failure to follow the applicable RMA policy, may result in a processing
fee. Customer shall be responsible for return shipment expenses for products which Datalogic, at its sole
discretion, determines are not defective or eligible for warranty repair.
The Datalogic Factory Warranty shall not apply to:
(i) ...... any product which has been damaged, modified, altered, repaired or upgraded by other than
Datalogic service personnel or its authorized representatives;
CCD solid state (2088 pixels)
63 mm typical
Humidity
Ì$+EA120D0A$-ÃÎ
Ì$+CM0$-ÃÎ
Touch™ 90 Light
If Datalogic determines that a product has defects in material or workmanship, Datalogic shall, at its sole
option repair or replace the product without additional charge for parts and labor, or credit or refund the
defective products duly returned to Datalogic. To perform repairs, Datalogic may use new or reconditioned
parts, components, subassemblies or products that have been tested as meeting applicable specifications
for equivalent new material and products. Customer will allow Datalogic to scrap all parts removed from the
repaired product. The warranty period shall extend from the date of shipment from Datalogic for the
duration published by Datalogic for the product at the time of purchase (Warranty period). Datalogic
warrants repaired hardware devices against defects in workmanship and materials on the repaired
assembly for a 90 day period starting from the date of shipment of the repaired product from Datalogic or
until the expiration of the original warranty period, whichever is longer. Datalogic does not guarantee, and it
is not responsible for, the maintenance of, damage to, or loss of configurations, data, and applications on
the repaired units and at its sole discretion can return the units in the "factory default" configuration or with
any software or firmware update available at the time of the repair (other than the firmware or software
installed during the manufacture of the product). Customer accepts responsibility to maintain a back up
copy of its software and data.
Warranty Exclusions
ICL Mode
Optical Features
Sensor
CR-LF
Ì$+CM1$-ÈÎ
256 scans/sec
Reading Indicators
DATA FORMAT TERMINATORS
For your convenience, some common Terminators are given below. For other
Header/Terminator selections, Data Format and Advanced Data Format
parameters, see the HHD II Software Configuration Manual.
Ì$+CP0$-$Î
Datalogic Scanning ("Datalogic") hardware products are warranted against defects in material and
workmanship under normal and proper use. The liability of Datalogic under this warranty is limited to
furnishing the labor and parts necessary to remedy any defect covered by this warranty and restore the
product to its normal operating condition. Repair or replacement of product during the warranty does not
extend the original warranty term. Products are sold on the basis of specifications applicable at the time of
manufacture and Datalogic has no obligation to modify or update products once sold.
Warranty Claims Process
TECHNICAL FEATURES
Electrical Features
Ì$+BK1$-yÎ
Español
USB-KBD
CODE SELECTION
Enabled codes

Ì$+FJ3$-$Î
INTERFACE SELECTION
PEN DEFAULT SETTINGS
interpret mode, conversion to code 39 disabled, output level normal, idle level
normal, minimum output pulse 600 s, overflow medium, inter-block delay disabled.

Ì$+BK0$-tÎ
Deutsch
t
e
s
t
Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall
assume risk of loss or damage for product in Datalogic's possession. In the absence of specific
written instructions for the return of product to Customer, Datalogic will select the carrier, but
Datalogic shall not thereby assume any liability in connection with the return shipment.
">