OMRON CPM1A 10CDR-A, 10CDR-D, 20CDR-A, 20CDR-D, 30CDR-A, 30CDR-D, 40CDR-A, 40CDR-D, 10CDT-D, 20CDT-D, 30CDT-D, 40CDT-D, 10CDT1-D, 20CDT1-D, 30CDT1-D, 40CDT1-D, CPM1A 20EDR, 20EDR1, 8ER, 20EDT, 20EDT1, 8ED, 8ET, 8ET1, CPM1 EMU01-V1 Operation Manual
Below you will find brief information for CPM1A 10CDR-A, CPM1A 10CDR-D, CPM1A 20CDR-A, CPM1A 20CDR-D, CPM1A 30CDR-A, CPM1A 30CDR-D, CPM1A 40CDR-A, CPM1A 40CDR-D. This manual covers installation, wiring, and basic operation of the OMRON CPM1A Programmable Controllers. It explains using programming consoles and SYSMAC Support Software, and troubleshooting hardware/software errors. Learn about features like input filtering, interrupts, and high-speed counters.
Advertisement
Advertisement
Advertisement
Key features
One-piece construction
Expandable I/O (up to 100 points)
Input filter function
Flash memory backup
Input interrupts
Quick-response inputs
High-speed counter
Analog I/O capabilities
Host Link communications
Frequently asked questions
Up to 100 I/O points are possible by using the CPU Unit and up to three Expansion I/O Units.
Relay output, sink-type transistor output, and source-type transistor output models are available.
Yes, up to 3 Analog I/O Units can be connected, providing 6 analog inputs and 3 analog outputs. The analog input range is selectable (0-10 VDC, 1-5 VDC, or 4-20 mA) with a resolution of 1/256.
The CPM1A supports Host Link (RS-232C and RS-422), one-to-one PC Link (RS-232C), NT Link (RS-232C), and CompoBus/S I/O Link.