OMRON C200H ASC02 ASCII Unit Operation Manual

Below you will find brief information for ASCII Unit C200H ASC02. The ASCII Unit is an intelligent PC peripheral device designed to make a PC-based control system more flexible and powerful. It is programmed in BASIC, and can be used for statistical quality control, system monitoring, data processing, report generation, and other tasks.

PDF
Document
ASCII Unit C200H ASC02 Operation Manual | Manualzz

Advertisement

Advertisement

/

Advertisement

Key features

  • Programmable in BASIC

  • Two RS-232C ports

  • Data exchange with PC

  • Program storage in EEPROM

  • Monitor Mode for assembly programming

Frequently asked questions

Connect the ASCII Unit to your PC using an RS-232C cable to Port 1 on the front panel.

The START/STOP switch is used to start and stop the execution of the ASCII Unit program.

The Machine No. switch is used to identify a particular ASCII Unit. This is necessary if you have more than one ASCII Unit connected to the same PC.

User questions

W R

Michael W.

What is the purpose and function of specifying XON with the OPEN command for data transfer management?

Specifying XON manages data flow to prevent overflow errors usually caused by mismatched baud rate buffering capacity. When XON is specified, the system sends an XOFF code to pause transfer if the data buffer is filled to 3/4 capacity, and sends an XON code to resume transfer if the buffer decreases to 1/4 capacity.

Q O

Michael Q.

How should XON be specified when using the OPEN operator?

To specify XON using the OPEN operator, the "valid signal line" (vsl) parameter must be set to a value between 8 and F within the parentheses, such as OPEN #2, "COMU:(XX)".

Preparing document for printing…
0%