Trackimo GPS tracker Quick Start Guide

Below you will find brief information for GPS tracker. This guide will help you install and charge the battery, as well as activate your device for the first time. You can also find information about the device's features, such as its red and green lights, as well as how to use the SOS button.

PDF

Document

Hello! I am an AI chatbot specifically trained to assist you with the TRACKIMO GPS Tracker Quick start Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Water resistant
Locking belt clip
Adhesive Velcro
Adhesive magnet
USB cable
Keychain and lanyard
SOS button
Red and green LED lights

Frequently asked questions

Unscrew the back cover and insert the battery.

Connect the USB cable to the charger port at the bottom of the phone, and the other end to a power USB adaptor. Then connect the USB adapter to a power outlet. Charge the device for 12 hours

Place your device outside, press the red button for 3 seconds. The green LED on the front of the device should flash for 3 seconds. Activate your device by browsing to trackimo.com