ENFORCER

Relay Module

®

SR-2224-C5

Features:

•••••

Two separate sets of Form-C dry contacts.

•••••

Perfect for a variety of general switching purposes.

•••••

Can be connected for load switching, dry contact, latching output, reverse polarity, line seizure, and other uses.

•••••

6/12/24 VDC operation, programmable by on-board jumpers.

•••••

Red LED indicates relay is energized.

•••••

Large terminal blocks for easy installation.

•••••

Small size, easily fits inside alarm panel enclosures or other hidden areas.

•••••

Foam mounting tape included.

Connection Diagram

Two separate sets of Form-C contacts

Input terminals to energize relay

Specifications:

Model Number: SR-2224-C5

Relay type:

Relay contact ratings:

Supply Voltage:

Current draw:

Minimum pull voltage

Size

Weight

Mounting method:

DPDT, Form-C dry contacts

5A @ 250VAC/30VDC

Programmable 6/12/24VDC, default at 12VDC

70mA @ 12-24VDC

100mA @ 6VDC

+/- 20% of operating voltage

2.76" x 1.89" x .79"

(70 x 48 x 20mm)

1.94 oz. (55 g)

Foam tape (included)

6V 12V 24V

JP1 ON ON OFF

JP2 ON OFF OFF

Preset 12V

2 Jumpers to program input voltage

(6,12,24V)

Red LED - lights to show relay is energized

ENFORCER

Power Supplies

®

Four Models to Choose From

● Switch selectable (see chart below) DC voltage output.

● Regulated and filtered output voltage.

● Switches to backup battery automatically in case of power loss.

●

●

Short circuit protection.

Built-in backup battery charger.

Model #

ST-1206-1.5A

ST-2406-2A

ST-2406-3A

ST-2406-5A

Voltage (DC)

6,12

6,12,24

6,12,24

6,12,24

Current

1.5A

1.5A

2.5A

4.0A

Current (peak)

2.0A

2.0A

3.0A

5.0A

SECO-LARM ® U.S.A., Inc.

16842 Millikan Avenue, Irvine, CA 92606

ENFORCER

Timer Modules

®

SA-025

● Triggered by positive voltage (+DC), closure of dry contact, or opening of dry contact.

● Set from 1 sec. to 60 min.

● Relay programmable to activate at start or end of timing cycle.

● Relay programmable for pulse (flash) activation.

● Built-in reset function.

● Form-C relay, contacts rated 8A @ 120VAC/24VDC.

● LED indicator.

● 12/24VDC (auto sensing).

● Low current drain.

● 2 7 /

8

" x 2 1 /

2

" (73 x 63 mm).

Power input

Current drain

Relay type

Contact ratings

12/24VDC (auto sensing).

Low

Form-C relay

8A @ 120VAC/24VDC.

Tel: 1-800-662-0800 (Domestic U.S. & Canada) Tel: 1-949-261-2999 (California & international)

Fax: 1-949-261-7326 Email: [email protected] Website: www.seco-larm.com

RelayModuleb.p65