advertisement
ENGLISH
2 WIRE VIDEO SYSTEM
USER MANUAL
Please read this manual carefully before using the product, and keep it safe.
CDV-47 LCD Monitor
1. Parts and Functions
Digital TFT LCD Screen
Emergency Button
Message Indicator
UNLOCK Button
TALK/MON Button
Microphone
L1
L2
Mounting Hook
Speaker
Connection Port
Mounting Hook
-2-
Key functions
LCD screen Display the visitors image
Emergency button Press for 3 seconds to send an SOS message
Message indicator Indicates a new visitor call record
Unlock button Press to release the door
Talk/Mon button Press to communicate with the visitor when called
Press to display the camera view anytime in standby mode
Transmit voice communication Microphone
Mounting hook
Connection port
Speaker
To secure monitor to bracket
Wiring and station setting
Receive voice communication
DIP Settings
Bit
DIP1&2
DIP3
Bit State
3
3
Description
Reserved. left to default.
Set to OFF. When the monitor is in the middle of the line in daisy chain connection.
Set to ON. When the montior is at the end of the line or connected to a DBC4S.
3
2. Mounting & Wiring
3. Main Menu
Touch the screen anywhere on monitor in standby mode, the main menu page will be shown as follows:
4. Basic Operation
1. Pressing the CALL b u tt o n o n t h e o u t d o o r s t a it o n w call source string li ring the monitor and display the visitors image (if the call is not answered, the monitor will switch off after
30 seconds).
l
00:30 Front Door
2. Press TALK/MON button or touch icon to talk (hands-free) to the visitor. When you have
TALK/MON button or touch icon again to end the communication.
-3-
3.
open the door for the visitor (if two locks are connected, touch unlock 2nd icon to release the second door)
UNLOCK Button or touch icon to
4.
TALK/MON Button will display the view of outside door camera. Touching the Monitor icon on main menu will access the "Door/Camera switching mode" - this is where multi door stations and/or CCTV camera's are installed, you can select the door station or
CCTV camera you want to view. Press icon to exit back to the main menu.
Note: if the system connect 2 wire camera via camera controller, press the camera
1/2/3/4 to monitor the camera you want.press icon to exit and enter main menu page.
5. Intercom Function
Touch Intercom icon on main menu to enter the intercom mode. Select one of the icon options: Inner Broadcast, Inner Call, Name List Call and Call Guard Unit.
-4-
1.
Inner Broadcast
Inner Broadcast and all the slave monitors will receive your audio broadcast at the same time.
2.
Inner Call
Call and all the slave monitors will ring at the same time, but whichever monitor
answers the call, a conversation can be started and the other monitors will stop ringing.
3.
Name List Call
: A user in one apartment can call other apartments in the system.
Touch Name List Call icon. Select a name on the screen then touch icon to call. Press / icon to view previous/next name list page. To rename, please touch the line to edit (01, 02 etc), then the keypad page will appear and you can input your new name in this page.
4.
5.
6.
7.
Name List
[ 01 ] Jim. Zhang
[ 02 ] Calo . Liu
[ 03 ] Jacko . Zhang
[ 04 ] Philips. Chen
[ 05 ] Hebe . Zhang
[ 06 ] Tony. Li
8.
9.
4.
Call Guard Unit
: A Monitor can be assigned as Guard Unit Monitor.To call, simply press the icon.
6. Video/Picture Memory of Visitors
Note: The visitor picture memory function is a standard feature in the monitor, video & audio is available with the addition of a Micro SD card.
Video/Picture Recording of Visitor
Auto-recording and manual recording is available, auto-recording is the default. On receipt of a call, after 3s the monitor will automatically record one video/picture. You can touch icon during a call to record the visitor's video/image manually.
Video/Picture Playback
Touch
Playback icon on main menu, the recorded videos/pictures will be played on the screen. The icon will Start/Pause the images recorded.
-5-
Image:008/020 2014/06/23 14:36:55
Note:
Without SD card, 118 images can be stored memory
With SD card (up to 32GB Micro SD), video and audio can be recorded
-6-
7. Review Call Records
All the calls received by the montior, including door-station-to-monitor and monitor-tomonitor, will be recorded and can be reviewed afterwards.
Touch Call Record icon on main menu to get into the call record mode.Unread call records will be indicated by a red arrow. Press the unread record, and then touch icon to play it.
Call Record
01/05
06-23 15:22 Calo.Liu
06-18 20:54 Smith
06-12 11:06 Vincent.Yang
05-29 08:39 Allen.Chen
05-27 21:43 Hebe.Zhang
04-20 13:16 Ben.Wu
Note:
It is not necessary to delete any records, as when the memory becomes full the newest call will be recorded and the oldest call will automatically be deleted.
Call Record
01/05
06-23 15:22 Calo.Liu
06-18 20:54 Smith
06-12 11:06 Vincent.Yang
05-29 08:39 Allen.Chen
05-27 21:43 Hebe.Zhang
04-20 13:16 Ben.Wu
8. Do Not Disturb Function
Touch Do Not Disturb icon on main menu to get into the do not disturb mode.
You have 4 options:
Normal, For 1 Hour, For 8 Hours and Always
. You can select the appropriate item according to your needs.
Do not
Disturb
For 1 Hour
For 8 Hours
Do Not Disturb
Normal
In 1 Hour
In 8 Hours
Always
Refuse Call In: 00:58:32
Note: When you select "For 1 Hour" or "For 8 Hours", bottom of the screen will display the remaining time.
9. Transfer Function
Touch
Transfer icon on main menu to get into the transfer mode. Select 1, 2 or 3 and input the telephone number via the digital keypad. There are 3 types of divert mode:
1: Don't Transfer - calls from the outdoor station will not be diverted.
2: If No Answer - if nobody answer the call from the outdoor station within 30 seconds, the call will be diverted to the telephone number(s) you set. The monitor will shut off immediately when the divert is sucessful, while not affecting the communication between the outdoor station and the telephone/mobile.
3: Simutaneously - calls from outdoor station will be diverted to your telephone immediately, but the monitor won't shut off when the divert is sucessful. If the monitor answers the call at this time, the divert procedure will quit and communication to the outdoor station will be via the monitor.
Transfer Options
Don't Transfer
If No Answer
Simutaneously
1)
2)
3)
-7-
Note:1.Touch icon to display the transfer device info.
2.Touch
Transfer Options
Don't Transfer
If No Answer
Simutaneously
1)
2)
3)
Transfer Device Info
Device -
SIM -
Network -
Signal Level -
10. Light
Note: the light function will be activated only when the system is connected to a light via the SC6V module. If no connection made, then this function is unvalid. For more information, please refer to the SC6V user instruction manual.
On main menu page or in monitoring, touch Light icon to activate the light - the light will be turned off automatically.
11. Basic Setup Instructions
Sound Settings
Touch icon on the main menu page then select "Sounds" from the Settings list. You can set a variety of ring tones on this page (touch icon to exit the setting and return to the main menu page).
-8-
Select Door 1, then the ring-tone you prefer (use the left/right arrows to move through tones). Repeat for Door 2 etc.
Date & Time Settings
Touch icon on main menu page, then select "Date & Time" from the Settings list.
You can set the date & time on this page (touch icon to exit the setting and return to the main menu page).
Note:
You can set your own time or you can synchronize the system time.
Rename & Monitor Time Settings
Touch icon on main menu page, then select "More" from the Settings list. You can rename the door station(s) and camera(s), also set the monitor time on this page (touch
icon to exit the setting and return to the main menu page).
-9-
To rename, please touch the line to edit, then the keypad page will appear and you can input your new name in this page.
DS-3_
DOOR3 RENAME abc
Screen and Volume Adjustment
During monitoring or talking, touch icon, the Adjust page will be displayed.
1. The Scene mode selection: Total 4 screen modes can be selected in sequence:
Normal,
Brightly, Soft
Brightness
User
and
User.
Whenever you modify
or
colour, Scene
item will be set to
mode automatically.
2. Note that all the modifications will be performed immediately after the operation.
Touch the window of image to exit the adjust page.
12. SOS/SMS Function
the SOS/SMS page. Then confirm by touching icon to send the SOS/SMS.
Send SOS SMS ?
-10-
An emergency text will be sent to the designated number.
13. Restore to Default
The restore to default function allows the user to recover the factory settings.
Enter main menu page, and touch icon, then select "About" item or touch the
logo to enter the "About" settings page. Touch icon, the default settings will be loaded.
Touch icon to enter the "Memo Information" page, touch and icon to copy the pictures to the SD card. Touch and icon to format the SD card and restart.
About
Local Address 00.00
Video Standard AUTO
System Verson 00.01.00
Display Driver 1.0
Front 1.0
UI 1.0
Memo Information
SD Card --
Video Capacity ----
Video Usage ----
Flash
Image Capacity 0118
Image Usage 0000
Memo Information
SD Card --
Video Capacity
----
Video Usage ----
Flash
Image Capacity 0118
Image Usage 0000
Format SD Card And Restart ?
Copy Pictures To SD ?
14. Monitor Parameter Setting
How to enter the installation setting page
About
Local Address 00.00
Video Standard
AUTO
System Verson 00.01.00
Display Driver 1.0
Front 1.0
UI 1.0
1.Touch icon on main menu page.
2.Touch UNLOCK button and hold for 2s.
_
INSTALLER SETUP
123
3.A digital keypad will be shown.
-11-
How to set the name list
On the main menu select “intercom” – then select “Name List Call”.
Highlight the number you wish to name/change and select . A keyboard will appear, enter/change the name then press ok to save.
How to set the slave monitor address
Maximum 4 monitors can be connected in one apartment,one master monitor together with 3 slave monitors, so you should set the address correctly.(note:must have one monitor to be set as master monitor)
The code of 8000 is used to set the master monitor.
The code of 8001 is used to set the first slave monitor .
The code of 8002 is used to set the second slave monitor .
The code of 8003 is used to set the third slave monitor .
How to set the monitor panel on
In default mode,when receive a calling,the master and slave monitors will ring at the same time,and just the master monitor can display the image while the slave monitors can not.But the settings can be changed,you can set the master monitor and all the slave monitors to panel on at the same time when receiving a call, just input the code number of 8006 on each slave monitor.
-12-
How to set date and time format
The system offers two methods of date and time.
The code number of 8008 is used to set the date format as month/day/year
The code number of 8009 is used to set the date format as day/month/year
The code number of 8012 is used to set the time format as 12 hour system
The code number of 8013 is used to set the time format as 24 hour system
How to set the unlock parameter
Unlock mode:
There are two unlock modes: 1.power-on- to-unlock type:unlock mode=0(by default)
2.power-off-to-unlock:unlock mode=1.
The code number of 8010 is used to set the unlock mode to 0
The code number of 8011 is used to set the unlock mode to 1
Unlock time:
The unlock time can be changed by yourself at any time.it can be set from 1 to 99 seconds.
The code number from 8401 to 8499 are used to set the unlock time to 1~ 99 seconds.
How to set the monitor as a Guard Monitor
A Monitor can be assigned as Guard Unit Monitor; when the Guard Unit Monitor answers the call, conversation with the guard person is started..
The code number of 8004 is used to set the monitor as a guard unit monitor and 8005 is used to cancel this function.
How to set the user code for the monitor
Each monitor should be assigned an address in the system, total 32 addresses can be controlled the address of 01 to 32
- please refer to the following table:
Input No.
8201
8202
8203
8204
8205
8206
8207
8208
8209
8210
8211
User Code
Code=1
Code=2
Code=3
Code=4
Code=5
Code=6
Code=7
Code=8
Code=9
Code=10
Code=11
Input No.
8212
8213
8213
8215
8216
8217
8218
8219
8220
8221
8222
User Code Input No.
User Code
Code=12 8223 Code=23
Code=13
Code=14
Code=15
Code=16
Code=17
Code=18
Code=19
Code=20
Code=21
Code=22
8224
8225
8226
8227
8228
8229
8230
8231
8232
Code=24
Code=25
Code=26
Code=27
Code=28
Code=29
Code=30
Code=31
Code=32
-13-
-14-
15. Specification
●
●
●
●
DC●20~28V●
●
●● Standby:●12.4mA●Working:●270mA
7●Inch●digital●color●LCD
800*3(RGB)●x●480●pixels
1Vp-p,●75Ω,●CCIR●standard
2●wires,●non-polarity
225●x●131●x●18mm
16. Precautions
1) All components should be protected from shock or vibration, and be careful the products are not impacted, knocked or dropped.
2) Please clean with a soft cotton cloth, please do not use a chemical cleaning agent. If necessary, please use a little pure water or dilute soapy water to clean.
3) Image distortion may occur if the video monitor is mounted too close to a magnetic field eg microwaves, TV's, computers etc.
4) Please do not subject the monitor to wet, high temperature, dust, caustic and oxidation gas environments, any of which could cause unpredictable damage.
5) Please use the right adaptor which is supplied by the manufacturer, or approved by the manufacturer.
6) Pay attention to the
high voltage
inside the products, please refer service only to a trained and qualified professional.
Note
-15-
CDV-47M (B/W)
The design and specifications can be changed without notice to the user. Right to interpret and copyright of this manual are preserved.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project