Kenroy Home 32285ORB Assembly Instructions

 MODEL: 322850RB
PACKING DIAGRAM
STYROFOAM: 12 KGS.
Ÿ
GLASS SHADE
BASE
SOCKET ASSEMBLY
- POLE
(2 PCS)
FINIAL & STEM.
Il
STYROFOAM: 12 KGS.
y
| a
FINIAL
GLASS SHADE
32285SHORB
(REPLACEMENT
PART)
STEM
SOCKET
2 PCS)
SOCKET
ASSEMBLY
ULL CHAIN
SWITCH
-«— — — UPPER POLE
-«— — — LOWER POLE
|
POWER
BASE CORD
I = PL
AVAILABLE PART 1S:
32285SHORB (GLASS SHADE)
ASSEMBLY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY.
THIS LAMP SHOULD TAKE APPROXIMATELY 10 MINUTES TO ASSEMBLE.
MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED.
UNPACK THE LAMP
YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE
PACKAGE: FINIAL, GLASS SHADE, STEM, SOCKET ASSEMBLY, UPPER
POLE, LOWER POLE AND BASE. TO PROTECT THE FINISH, PLACE ALL
PARTS ON A SOFT SURFACE.
ASSEMBLE THE [AMP
1. CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH, FLAT
SURFACE. LINE UP ALL OF THE PARTS ACCORDING TO THE ASSEMBLY
DIAGRAM.
2. SCREW THE LOWER POLE TO TOP OF THE BASE.
3. SCREW THE UPPER POLE TO TOP OF THE LOWER POLE.
4. SCREW THE SOCKET ASSEMBLY TO TOP OF THE UPPER POLE.
5. SCREW STEM TO TOP OF THE SOCKET ASSEMBLY.
6. PLACE GLASS SHADE OVER THE STEM AND SECURE WITH FINIAL.
7. INSTALL A 60 WATT MAXIMUM MEDIUM BASE TYPE "A" BULB (NOT
INCLUDED) INTO EACH SOCKET.
8. PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT
SWITCH.
BULB REPLACEMENT
1. BEFORE REPLACING THE BULB, BE SURE THAT THE SHADE AND
BULB ARE COOL AND LAMP IS UNPLUGGED.
2. UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A
NEW BULB. PLUG POWER SUPPLY CORD BACK INTO OUTLET.
TROUBLE SHOOTING
1. IF YOUR LAMP DOES NOT LIGHT, CHECK PLUG AT THE OUTLET.
MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE
POWER OUTLET.
2. IF LAMP STILL DOES NOT LIGHT, UNPLUG FROM OUTLET. CHECK
THE BULB FOR A BROKEN FILAMENT. REPLACE BULB IF NECESSARY,
PLUG IN LAMP AND TURN IT ON.
3. IF THE LAMP STILL DOES NOT LIGHT, PLEASE CONTACT YOUR
DISTRIBUTOR OR PLACE OF PURCHASE.
IMPORTANT SAFETY INSTRUCTIONS
11/2013
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER
THAN THE OTHER) AS A FEATURE TO REDUCE THE RISK OF
ELECTRIC SHOCK. THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY
ONE WAY. IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET,
REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED
ELECTRICIAN. NEVER USE WITH AN EXTENSION CORD UNLESS PLUG
CAN BE FULLY INSERTED. DO NOT ALTER THE PLUG.
322850RB INSTRUCTIONS