The Navori QL Digital Signage Software is designed for use on dedicated PC equipment. The QL software is made up of 3 components: The QL Engine which is the playback application, fully dedicated to content playback; QL Conductor - a watchdog service that monitors the health of the PC and manages the communications between Navori QL Server and the QL Engine; QL Guard - a service which the sole purpose is monitoring the QL Conductor service making sure it is always operational. The Navori QL Software can be installed on Windows 7, Windows 8, Windows Server (2008 R2 or 2012) for server and player installations.
Advertisement
Advertisement
Version 1.0.0.23
ERVER INSTALLATION TROUBLESHOOTING
F YOUR PLAYER IS UNDER A DOMAIN
2 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
3 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
NOTE: The requirements listed are valid for a network of 10 players or less. Above this number, please contact
Navori and provide:
Number of players
Maximum size of new content sent for every player update
Minimum player PCs bandwidth
Upon receiving this information, Navori will adjust its hardware recommendations for you.
The following section features the instructions you should follow to ensure your server host PC is properly configured prior to installing the Navori QL Server application.
In order to complete this software installation you must be logged in on the PC where you will install Navori QL Server with a user account that has full administrative
rights. Please note that UAC (User Account Control) must be disabled.
4 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
Navori QL requires Microsoft SQL Server (2005, 2008 or 2012) in either Express and commercial versions. Please note the following differences between SQL
Server Express and Commercial Editions: o
SQL Server Express can support databases up to 4 Gb. Commercial versions of SQL do not have this constraint. With commercial versions of SQL
Server, the limit is the storage available on the PC. o
SQL Server Express can only have access to 1 CPU of its hardware’s resources. Additionally, it is limited to using up to 1 GB of RAM. o
To automate database backups on SQL Server Express you will need to install third party software. Commercial versions of SQL Server can perform automated backups via "Maintenance Tasks".
Microsoft SQL Server can be installed on the same PC on which you will install Navori QL Server or it can be installed on a remote PC.
SQL Server needs to be configured with very specific settings in order for it to work with Navori QL Server.
You must configure your SQL account login so that it uses Mixed Mode (Windows and SQL Server authentication). See below for details.
If you do not have SQL Server currently set up and installed, you can use the link below to download SQL Express 2008 which is the version we recommend: http://www.microsoft.com/downloads/en/details.aspx?familyid=E08766CE-FC9D-448F-9E98-FE84AD61F135&displaylang=en
NOTE: If you are installing SQL Server Express, make sure you keep the default installation settings, especially when it asks for an instance name. Double-check that the resulting instance name is called SQLEXPRESS.
Once SLQ Server is installed you must follow the steps below to configure it for Navori QL :
Make sure SQL Server and SQL Server Browser are both running and set to "Automatic".
For each Protocol entry, make sure Shared Memory, TCP/IP and Named Pipes are set to "enabled".
If you need to change a setting, re-start the SQL Server service to ensure your settings have been registered by the application.
Next, you must create your Navori-specific user account in the Microsoft SQL Server Management Studio.
In certain cases, SQL Server cannot be reached by entering a server name.
If you are asked to enter the SQL Server name as follows: "IP address:Port Number" (such as is the case when the server is in a DMZ), you must enter the address as in this example: 10.2.230.4,5000 You must use a comma (,) instead of the colon (:) between the IP address and the port number otherwise it will not work.
Once you are connected, select Security > right-click on Logins and select New Login...
You will now create a new account. This account must be a SQL-Based (SQL Server Authentication) user.
Make sure the password will not expire, and that the language is set to English. Also, the default database should be master.
Next, you must assign the following settings:
5 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
Under Server Roles, select dbcreator, public and sysadmin.
Under User Mapping select Master in the top pane and db_accessadmin, db_owner and public in the pane below.
Click OK to save the user.
Once you have completed these settings, your SQL Server will be configured and ready to use.
Be sure to re-start the SQL Server service to ensure your settings have been registered by the application.
Test out your new SQL user by trying to connect to it using SQL Server Management Studio.
If the connection fails, make sure your SQL Server is configured to accept both authentication methods. To do this, open the Server Properties in the Security tab:
Under Server Authentication, select SQL Server and Windows Authentication mode. You will also need to restart SQL Server.
Try connecting to your SQL user again to confirm that it works.
The next section describes how you configure Microsoft IIS server so it can be used with Navori QL.
By default, Navori QL looks to access the SQL Server via a name and not an IP address.
If your SQL Server installation is set up so the SQLserver Name corresponds to an "IP:Port Number" (such as is the case in a DMZ for example) you must enter the address as follows:
10.2.230.4,5000 (example only, substitute the IP address and port number according to your installation).
So you must separate the IP address from the port number using a comma (,) and not a semicolon (:).
The next steps will describe how you install and configure Microsoft IIS Server and Microsoft .NET components for use with Navori QL.
6 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
Microsoft IIS needs to be installed and configured on your Navori QL Server PC using the following components.
These settings ensure that your IIS server has everything it needs to run the Navori QL Server software. If you do not see all of these options, make sure your
Operating System has all the latest updates installed.
Windows Server (2008 R2 or 2012)
If IIS is not currently installed, select Server Manager > Right-click Roles > Add Roles and Web Server (IIS) will be found in the wizard. Following that, IIS modules can be selected and installed.
Windows 7 or Windows 8
If IIS is not currently installed, select Control Panel > Programs > Programs and Features > Turn Windows Features On or Off > Internet Information Services.
Enable the features listed below. You will find these listed under Web Management Tools and World Wide Web Services.
NOTE: If you wish to configure IIS so that your Navori QL Server is accessible through a secure channel
(HTTPS) instead of HTTP, please refer to the Support Documentation for the article
“How to configure SSL for secure web connections (https)”: http://www.navori.com/data/QLSupport/index.html
If you plan on installing Navori QL Server on Windows Server 2008 R2 or Windows Server 2012, you will need to install the Microsoft Desktop Experience
(PLEASE NOTE: this step is not required if you are planning to run Navori QL Server on a Windows 7 or Windows 8 PC).
The Desktop Experience feature enables you to install a variety of Windows 7 features on your server running Windows Server (2008 or 2012).
What does the Desktop Experience feature include?
Desktop Experience includes the following Windows 7 or Windows 8 components and features:
Windows Media Player
Desktop themes
7 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
Video for Windows (AVI support)
Windows SideShow
Windows Defender
Disk Cleanup
Sync Center
Sound Recorder
Character Map
Snipping Tool
To function properly, Navori QL Server needs .NET Framework 4.0 to be installed on the Server PC.
Use the link below to download and install the latest version of Microsoft .Net Framework: http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992
On the QL Server PC, launch Internet Explorer.
TEST 1 :
o
Type in the following URL: http://localhost/
TEST 2 :
o
Type in the following URL: http://ACCESSADDRESS/ o
Examples:
/
/
/
ACCESSADDRESS is the address (IP or DNS name) you will be using to access to your QL Server from any location, be it your work computer to access the QL Manager web interface, or from the player computers to interact with the server.
The same address will need to be used at all times, no matter the location it is used from.
If you need your server to be accessible from an external location, you will need to set your access address to be an external IP address or DNS name. You may also have to set up your network so that your external IP address redirects to your QL Server PC’s internal IP address.
We recommend that you take the time to set a DNS name for your server, be it for internal or external use. This way, if your s erver’s IP address ever changes, you will avoid having to re-configure all of your player machines.
Examples of Access Addresses:
Internal IP: 192.168.1.200
External IP: 24.214.153.147
DNS name: mycompanyname.com or signage.mycompanyname.com
In any case, your server should be set with a Static IP address. For more details, refer to Step 3. Identifying
server PC's IP or DNS address for QL Manager Users.
For both tests, you should see the IIS welcome screen. This confirms IIS is installed and operational.
PLEASE NOTE: If you do not see the IIS welcome screen, verify that IIS is installed and configured according to our instructions.
PLEASE NOTE: The following steps are only required for Microsoft Windows Server 2008 or Windows Server 2012 users only.
Log in to your Server PC.
Select Start > Administrative Tools> Server Manager.
8 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
In the Server Manager window, click on the root (Server Manager) and then click Configure IE ESC.
This will open the Enhanced Security Configuration window.
Make sure Administrators and Users are set to OFF.
Next, launch Microsoft Internet Explorer (IMPORTANT: use IE 32 bit version, not IE 64 bit).
Navigate to the Navori web site ( www.navori.com
). If necessary, install the Flash Active-X plug-in so you can view the Navori web site correctly.
Your Navori QL Server PC must use a static IP address.
9 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
Click on Start > Run > and Type command cmd > Press [enter] key
At the DOS prompt type the command: ipconfig > Press [enter] key
You should see the IP address
You may also use this technique to determine the IP address :
Click on Start > Control Panel > Network and Sharing Center > Connection > View Status
Click on Properties
Select Internet Protocol (TCP/IP)
Click on Properties and look for IP Address and Preferred DNS server
You can install Desktop Experience using the Initial Configuration Tasks Wizard or Server Manager.
To install Desktop Experience using the Initial Configuration Tasks Wizard:
In the Customize This Server section, click Add features.
Select the Desktop Experience check box, and then click Next.
Complete the wizard by clicking Install.
To install Desktop Experience using Server Manager:
Open Server Manager: click Start, point to Administrative Tools, and click Server Manager.
Note: You can also open Server Manager by typing the following at a command prompt: servermanager.msc
In the Features Summary section, click Add features.
Select the Desktop Experience check box, and then click Next.
Complete the wizard by clicking Install.
The ActiveX version of the Adobe Flash Player must be installed on your server PC. To do so, proceed as follows:
Launch Internet Explorer and visit http://get.adobe.com/flashplayer/ . Follow the instructions to download the Flash Player.
This will ensure proper Flash playback inside Internet Explorer (IE).
To confirm Flash has been installed correctly, open an IE browser window and go to http://www.navori.com
If you can see the Navori home page's Flash banner, your Flash installation is completed and you can go to the next step.
10 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
On the QL Server PC, look in the application installation folder. By default, this will be: C:\Program Files\Navori\NavoriQLServer.
Locate and launch NavoriQLConfigHelper (note, there is a XML configuration file and the executable so make sure you double click on the executable file).
Under the tag Proxy settings, click Enable proxy and then fill in the fields.
Once you have entered your proxy settings, click the Test Proxy button.
If you get an error after clicking the test button, take a screen shot and save the file. Open a new support ticket and report your findings.
Take the screen shot file that you saved previously, compress it into a single Zip file and then attach it to your support ticket.
Once you have completed your QL Server installation, we recommend you collect the following information which you will save i n a text file (for safekeeping).
This is so you can easily restore your installation to its default parameters should you ever need to do so.
Create a new Word or text file and list this information:
1. The IP or DNS address (Access Address) of the PC on which you installed Navori QL Server.
2. The Host Name of your Microsoft SQL Server.
3. Your SQL Server PC Name.
4. Name of the SLQ Server instance (*if it applies).
5. Your Navori extranet user account name, password (which you are using to login to navori.com) and your Navori QL Server license serial number.
Once you have completed the server PC preparation, you can proceed with the Navori QL Server software installation.
Begin by launching the installation package (NavoriQLServer.exe) on your PC.
At the initial screen, click Next to begin.
11 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
You will be presented with the license agreement. Please review it and click the box to accept the license agreement an d click Next to continue.
You will be asked to test your connection with the Navori extranet. Users with direct access to the Internet can click the Verify Connection to Navori button.
Users accessing the Internet via a Proxy Server must fill out the Proxy Settings fields and validate their connection before they can proceed. You will see the following confirmation upon successful connection. Click OK to continue.
Click Next.
In the following window you will be asked to input your Navori Extranet login information, your Navori QL Server License Key, your SQL Server information, the IP or DNS address (Access Address) of your QL Server PC. You must also specify a folder where Navori QL Server will store its data. Once the information has been entered, you may click the "Verify Credentials" buttons to confirm your entries before proceeding with the installation.
Upon success of the tests you will receive the following confirmations. Click OK to continue.
12 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
In certain cases, SQL Server cannot be reached by entering a server name. If you are asked to enter the SQL Server name as follows: "IP address:Port Number" (such as is the case when the server is in a DMZ), you must enter the address as in this example: 10.2.230.4,5000
You must use a comma (,) instead of the colon (:) between the IP address and the port number otherwise it will not work.
Click Next. If you need to revise your settings, click the Back button, otherwise, click Next to begin the installation on your Server PC.
The next window will show the progress bar. When the installation has been completed you will be asked to activate your license. Click the Activate your
product now button to proceed.
13 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
Leave the Run NavoriQLServer now box checked to automatically launch the application at the end of this process.
Upon successful license activation you will see the following message:
After you have completed the installation and activation of your software click the Finish button to close the installer.
Internet Explorer will launch and you will be presented with the QL Manager login page.
Navori QL Server is automatically configured with two user accounts. You may log in with either account to test your installation.
One account is the Root Level Administrator account. This account has full administrative rights for this Server. You must login with this account to perform any administrative duties.
Here are the account's default credentials (note: they are case-sensitive):
User Name: Administrator Password: VD293330
The installer also will create a second user account. This user account will only have regular end-user rights. It cannot be used to perform management duties.
This user account will automatically be configured according to your Navori Extranet account user's login name and password.
Example: Let's say your Navori Extranet login name is [email protected] and your Navori Extranet password is: "lucky123". Once you have completed your Navori QL Server installation, you can log in to your server using this account and you would have access as an end-user. You would not be able to create other user accounts nor assign domain access. You would simply be permitted to interact with the server as a regular user.
To perform any administrative duties, you would need to log in using the Administrator account.
Once you have typed in your login name and password, you will see a screen indicating the application is loading followed by the QL Manager application interface.
NOTE: YOU SHOULD CHANGE THE DEFAULT ADMINISTRATOR PASSWORD AS SOON AS POSSIBLE.
Your Navori QL Server software is now installed and configured.
14 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
Follow these steps to validate your Navori QL Server installation.
1. Launch Internet Explorer and type in your QL Server's IP or DNS Address (Access Address) followed by /navorimanager.
For example:
http://signage.mycompanyname.com/navorimanager
Important: if you use Windows 8, launch Internet Explorer from the desktop, not from the Metro interface, otherwise Windows UAC will be reactivated
which will cause troubles to Navori QlPlayer.
2. Log in to your Navori QL Server using the Root Level Administrator account using the account's default credentials (note: they are case-sensitive):
User Name: Administrator Password: VD293330
Once you are logged into QL Server:
1. Select Menu > User Management > Create/Assign User:
2. Locate the Administrator user account. Right click the account name and select Properties:
3. In User Properties, select the Account tab then replace the current password with the one of your choice. Re-type the password in the Confirm field and then click OK to save your changes.
Your default Administrator account password has now been changed. Be sure to keep this information in a secure place as this account has complete access to your system.
The installer automatically creates a second user account which is based on your Navori Extranet account. This account has r egular user rights. It cannot be used to perform management duties.
To complete the installation validation process, you must log in to your QL Server using this account.
Example: Let's say your Navori Extranet login name is [email protected] and your Navori Extranet password is: "lucky123". Once you have completed your Navori QL Server installation, you can log in to your server using this account and you would have access as an end-user. With this account you are not authorized to create other user accounts nor assign domain access, however you can interact with the server as a regular user.
1. Launch Internet Explorer and type in your QL Server's IP or DNS Address (Access Address) followed by /navorimanager.
2. Log in to your Navori QL Server using the Default User account using the account's default credentials (your Navori Extranet login name and password).
15 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
This section covers the Navori QL Player application.
You will find here instructions on how to install, configure and maintain QL Players.
Navori QL Player features a new proprietary graphics engine that takes advantage of the latest PC technologies. It was designed run fully autonomously on dedicated
PC equipment.
For the best possible performance, we recommend installing Navori QL Player on a Windows 7 or Windows 8, 64 bit PC with the Aero user interface enabled
and functional.
We suggest you take the following steps to prepare your PC prior to installing Navori QL Player:
1. Update your video card and audio card drivers to the most current version available.
2. Uninstall any previously installed video codecs, including the Apple QuickTime Player.
Please note that Navori QL Player is made up of 3 components: o
The QL Engine which is the playback application, fully dedicated to content playback. o
QL Conductor which is a watchdog service that monitors the health of the PC and manages the communications between Navori QL Server and the QL
Engine. o
QL Guard which is a service which the sole purpose is monitoring the QL Conductor service making sure it is always operational.
All 3 components will be installed.
Before installing Navori QL Player behind a Proxy Server you will must follow these steps:
PLEASE NOTE: The procedures that are described on this page may require information about your proxy server that can only be provided by y our system administrator.
Because of this, you may need to contact your system administrator before you can proceed.
1. Open Internet Explorer by clicking the Start button . In the search box, type Internet Explorer, and then, in the list of results, click Internet Explorer.
2. Click the Tools button , and then click Internet options.
3. Click the Connections tab, and then click LAN settings.
4. Select the Use a proxy server for your LAN check box.
5. In the Address box, type the address of the proxy server.
6. In the Port box, type the port number.
If your network requires separate proxy addresses and port numbers for different services, such as HTTP, HTTPS, or FTP, click the Advanced button, and then type the individual proxy server addresses and port numbers to use.
7. When you're finished making changes, click OK, and then click OK again.
If you follow the steps to change proxy server settings and still find that the address you type for a new proxy server isn't remembered, here are some things to check:
If you're entering a Uniform Resource Locator (URL) or Internet address for the proxy server, be sure you're using slashes (/) rather than backslashes (\) when typing the address. For example, type http://servername rather than http:\\servername.
If you're entering a universal naming convention (UNC) or local network address for the proxy server, make sure you're using backslashes (\) rather than slashes
(/). For example, type \\servername rather than //servername.
1. Enter the following URL:
http://[IP or DNS address of your QL Server]/NavoriService/NavoriService.svc
2. If a web page appears with a request to create a service, Player is communicating properly with QL Server.
If you do not see this message, Player is not communicating with QL Server and you must check your settings.
16 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
To download the Navori QL Player you must first have created a Navori Extranet user account and your QL Server must be properly configured so it can log in to the extranet.
Launch your web browser (from the Player PC) and type in the IP address or DNS of your Navori QL Server, followed by /navorimanager/.
You should see the Navori QL Manager login page come up.
Important: if you use Windows 8, launch Internet Explorer from the desktop, not from the Metro interface, otherwise Windows UAC will be reactivated
which will cause troubles to Navori QlPlayer.
Type in your login name and password then click Connection.
Once you are logged in, retrieve the Player license serial number by right clicking on the Player's name and selecting Properties > License Information.
Highlight the entire serial number and copy it to the Windows Clipboard using Ctrl+C. You will be able to paste it when prompted by the Player installer.
Click OK to close this window and continue.
Select Menu > Tools > Download QL Player
You will be prompted to download and run the installer on your PC. Save the file to your hard drive.
17 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
Locate the installer file on your hard drive.
It is recommended you use the Run as administrator option to launch the Player installer.
NOTE: It is mandatory that Navori QL Player is run with a user that has Administrator privileges to the Player
PC. It is recommended that the PC be logged in with that same administrator user to proceed with the installation.
If you cannot have Windows logged in with an administrator user, instructions to change Services configuration are provided after installation instructions.
If the Player PC is brand new and running with Windows default settings, you should be able to install and run
Navori QL Player without issue.
Once you launch the installer, the following window will appear, click Next :
Next you will be shown the End User License Agreement (EULA).
If you wish, you can print a copy of the agreement for your records.
You must acknowledge this window and click Next before you can proceed.
Once the installation has completed, you will be prompted to enter
your license information to activate your software.
Enter your Navori QL
Server’s URL in the top field.
Then enter the Player’s serial number in the second field. This is your activation key.
Upon successful completion of the software activation, click Finish. After a brief moment, the Navori QL Player will launch and you will see the default screen.
18 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
When you log back into Navori QL Manager you will see your Player appear under your assigned group.
The status box left of the Player’s name will change from gray to blue to indicate it is communicating with the Server.
In certain cases (due to security policies for example), you may need to have the Player PC boot up with a user account that has minimal rights on your network.
When this happens, some Navori QL Player services will not have sufficient credentials to operate properly. To resolve this situation, you must configure t he Navori
Guard and Navori Controller services so they always use proper administrative credentials even if the Player (on Windows) is logged in under a restricted account.
Here is the procedure:
1. Perform the Navori QL Player installation as above using a full administrator account.
2. Once the software has been installed, go to the Windows toolbar and select Start > My Computer (right-click and select Manage). This will open the Computer
Management window.
3. Select Services and Applications > Services. Scroll down until you see Navori Conductor Service and Navori Guard Service.
4. Right click Navori Conductor Service. This will open the Service Properties window. Select the 2nd tab (Log On).
5. Under Log on as: select This account and then either select an existing Administrator account using the Browse button or type the Administrator account name,
password and re-enter the password to confirm. Click OK to confirm your settings.
6. Repeat these steps for the Navori Guard Service.
You may now configure the PC to boot up under a restricted user account and both Navori services will use the administrator credentials ensuring the load and operate as required.
19 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
In this section we will go over a series of tests meant to ensure your Navori QL Server is fully functional.
Begin by logging in with your Administrator or Default User account.
Next, proceed with the steps described on the next pages.
If YES, continue to the next question.
If NO, make sure IIS is properly configured and running, as well as your network / access address settings. Refer to the previous sections to double-check.
If YES, see step #2.
If NO, make sure your Access Address is properly configured, both on your network settings and on your Navori QL Server configuration.
You will not be able to login if the URL in your browser does not include the Access Address.
If you realize you have configured an incorrect Access Address during installation, please refer to the Support Documentation and find the article named
to learn how to change your configuration.
If YES, see step #3.
If NO :
Make sure SQL Server is properly configured and running.
Make sure Windows Media Player is properly installed and can run as expected.
(Windows Server 2008) Make sure IE ESC settings are set to Off (both Administrators and Users)
Make sure CCCP Codec Pack is installed
Make sure your media is readable by Internet Explorer and or Media Player Classic, on your server computer
If all else fails, please refer to the Support Documentation and find the article named
to learn how to change your configuration. You will want to change the field called Web Server localhost address ; change it to localhost. Save your settings and try again.
If it still fails, open a support ticket on Navori’s extranet and describe the full details and steps to reproduce your issue, as well as steps that were taken to fix it.
If YES, see step #4.
If NO, make sure SQL Server is properly configured and running.
If YES, see step #5.
If NO, make sure SQL Server is properly configured and running.
If YES, congratulations! Your installation is validated.
If NO, check your Internet/Proxy settings.
20 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
The following section features the instructions you should follow to validate your Navori QL Player installation.
Locate the player in Navori QL Manager (in the player window).
Is the status color blue? If so, your player is communicating properly with your server.
If the status color is red, your player is not communicating with your server.
Ensure the PC is powered up and the QL Player software is running.
Ensure all networking cables are connected and the Player can communicate with the QL Server PC.
If communicating via proxy server, ensure the proper settings have been entered.
Perform the following test to confirm the player can receive new content.
1. In QL Manager, select the group (or sub-group) in which the player is located.
2. Add a new media item to the content library (pick something simple like a jpeg image for example).
3. Add the item to a new playlist.
4. Drag and drop the playlist onto the program grid. Pick today and select a period that covers the current date/time. This will assign the playlist to a time slot in the planning grid.
5. Click Update to send your new program and content to the player.
You should now see a progress bar showing the file being transmitted to the player. Depending on the speed of your connection and the size of the file being sent, it is possible the file transfer progress may jump from 0% to Done instantly. If this is the case, the player is communicating properly. Done means the player has received its update.
If the file transfer status only shows 0% and never increases then you should look at the player status indicator in QL Manager.
If the status color is red, your player is not communicating with your server.
Ensure the PC is powered up and the QL Player software is running.
Ensure all networking cables are connected and the Player can communicate with the QL Server PC.
If communicating via proxy server, ensure the proper settings have been entered.
It is important to ensure the QL Player engine and its associated services load automatically whenever the PC is restarted or rebooted.
To ensure the software is configured correctly, perform the following test:
1. If QL Player is running on the PC, click Alt-Tab to bring up the Exit Player window. Click Exit Player to shut down the application.
2. Once QL Player has terminated, select Start > Shut Down >Restart in the Windows task bar.
3. Your PC will reboot. QL Player should launch automatically and any scheduled content will be displayed on the screen. If no content was scheduled for this period, the default media will be shown.
Once your player has rebooted and resumed communication with QL Server, the status indicator in QL Manager will turn blue.
You should log in and confirm this is the case:
21 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
If there were any issues with your installation, you should follow the steps in this section.
(via your server's IP or DNS address (Access Address) followed by /navorimanager)
If so, proceed to the next step.
Navori QL Server features a configuration application called Update Config Helper.
It is a software application that administrators and IT personnel can use to modify certain core settings of the Navori QL Server environment.
The default location where you will find this application on your server PC is in: C:\Program Files\Navori\Navori QL Server Installation Package.
The file you need to launch is: NavoriQLConfigHelper.exe (If you get an error, be sure to launch the executable "As Administrator" otherwise it will not access your settings properly)
You will see the following window:
There are 5 tabs in this window: o
Proxy Settings
o
Connection Settings
o
Database Settings
o
Extranet
o
Check Windows Rights
The Connection Settings tab is where you can review and configure your server's communication parameters.
Select the IP or DNS of the Navori Web Service. Copy it to the clipboard
(Ctrl+C)
Launch Internet Explorer and paste the URL (Ctrl+V)
; add ‘/navorimanager’.
Hit Enter. You should see the Navori QL Manager page come up.
The QL Manager login page is accessed by the Navori Web Service IP Address. If this is not properly configured, you will not be able to access your system via QL
Manager.
If so, you have a software activation issue. Proceed as follows:
1. Launch SQL Server Management Studio.
2. Connect to your SLQ database instance.
3. In the Object Explorer pane, select Databases > NavoriSQL > Tables (REQUIRES CONFIRMATION FROM NAVORI FOR OTHER STEPS)
4. Right-click the dbo.ServerSettings table, and click “Select Top 1000 rows”.
5. If no results are found
, this means your server’s activation was not completed.
Uninstall Navori QL Server and install it again. At the end of installation
, make sure you click on the “Activate your product now” button.
The URL you entered to access QL Manager does not match the Navori Web Service , IP or DNS.
22 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
If you encounter problems with your player, use the Navori Diagnostic Tool. This program will generate a diagnostic file that you will attach to a Navori support ticket.
This diagnostic file will help us to understand and solve your problem.
Here is the procedure:
Download the diagnostic tool: http://c712600.r0.cf2.rackcdn.com/QLPlayerDiagnosticTool.zip
Unzip the file, then copy “QLPlayerDiagnosticTool.exe” to the Navori Player folder (“C:\Program Files (x86)\Navori\Navori QL Player”)
Launch “QLPlayerDiagnosticTool.exe”
Click “Launch Diagnostic”
Once the diagnostic file is created, go into the Navori Player folder (
“C:\Program Files (x86)\Navori\Navori QL Player”), right click the diagnostic file, click
“send To”, then click “Compressed (zipped) Folder”.
A compressed zip file has been created in the same folder. Open a Navori ticket support with a little description of the problem that you encountered, attach this zip file to the ticket, and send the ticket.
23 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
If the player is under a domain, you have to login on windows startup. Navori QL Player automatically restarts the computer once a day. To avoid having to manually logon every day, follow these instructions to configure an auto-logon in windows.
Click
Start, click Run, type “regedit”, and then click OK. In Windows Vista/7, simply type regedit in Start Search and hit Enter.
Navigate to the following registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon
Double-click the
entry, type the user name to log on with (DOMAIN\USERNAME format), and then click OK.
If DefaultUserName registry value name is not found, create a new String Value (REG_SZ) with value name as DefaultUserName.
Double-click the
entry, type the password for the user account under the value data box, and then click OK.
If there is no DefaultPassword value, create a new String Value (REG_SZ) with DefaultPassword as the value name.
Double-click the
entry, type 1 in the Value Data box, and then click OK.
Quit Registry Editor.
Click Start, click Run, type “
”, and then click OK. In the Console windows, click “File”, “Add/Remove Snap-in”. In the “Add/Remove Snap-in” window, select “local users and groups” and click “Add”. Select “local Computer” and click “Finish”. Click “ok”.
24 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
Important: before to enable HTTPS, Navori QL Server must be installed in HTTP mode.
First you must configure IIS server to use HTTPS.
You can follow instructions described on the following link:
http://learn.iis.net/page.aspx/144/how-to-set-up-ssl-on-iis/
Then open the Config Helper tool. The default location where you will find this application on your server PC is in: C:\Program Files\Navori\Navori QL Server.
The file you need to launch is: NavoriQLConfigHelper.exe (If you get an error, be sure to launch the executable "As Administrator" otherwise it will not access your settings properly).
Go to the Connection Settings tab
, and replace the “http://” items by “https://” items, and click the Update button to validate:
25 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
It is recommended you backup your Navori QL Server on a regular basis, or at the very least:
Following a successful installation.
Prior to installing a Navori QL software update or patch.
Backup the following directories on your QL Server PC
Make sure you back up the contents of these folders: o
The NavoriManager folder (typically located under C:\inetpub\wwwroot\) o
The NavoriService folder (typically located under C:\inetpub\wwwroot\) o
The Content Storage Folder. This will preserve all of your media files in case you need to restore your setup. The content storage folder location is determined during the QL Server software installation.
Backup your NavoriSQL database. PLEASE NOTE!: The Navori Content folder and the database must be synchronized; that is, the content must match what is in the SQL database. To backup your database, proceed as follows:
1. Launch the Microsoft SQL Server Management Studio.
Open the Databases tree and locate NavoriSQL. Right click it and select Tasks > Back Up...
2. Make sure the correct database is selected. Select Full backup. Give this database backup a name.
3. Select Disk as the destination. The first time you back up your database, you will need to click Add..., select in which folder to store the backup and name the backup file. The next time you create a backup you can simply click OK and this will overwrite the previous file, saving you a step. You can also create a new backup under another name if you wish.
4. When the backup is completed you can click OK to finish the process. Once you have performed these backups, the system can be restored at any time from any broken state.
26 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
All copyrights, trademarks, and registered trademarks are the property of their respective owners.
All information on this site is of a general nature and is furnished for your knowledge and understanding and as a technical resource only. The documents and any related graphics published on this server could include technical inaccuracies or typographical errors. Changes are periodically added to the information contained in this Web site. Navori SA may make improvements and/or changes to any of the products depicted or described herein at any time. Navori SA expressly disclaims any responsibility or liability for any adverse consequences or damages resulting from your reliance on the information on this site.
YOUR USE OF THE SERVICE IS ENTIRELY AT YOUR OWN RISK. NAVORI SA WILL NOT BE RESPONSIBLE TO YOU OR TO ANY THIRD PARTIES FOR ANY
DIRECT OR INDIRECT, CONSEQUENTIAL, SPECIAL, OR PUNITIVE DAMAGES OR LOSSES YOU MAY INCUR IN CONNECTION WITH THE SERVICE, YOUR
USE THEREOF, OR ANY OF THE DATA OR OTHER MATERIALS TRANSMITTED THROUGH OR RESIDING ON OUR SERVICE, REGARDLESS OF THE TYPE
OF CLAIM OR THE NATURE OF THE CAUSE OF ACTION, EVEN IF WE HAVE ADVISED OF THE POSSIBILITY OF SUCH DAMAGE OR LOSS.
The links furnished in this site will allow you to leave Navori's web site. These linked sites are not under the control of N avori SA and Navori SA disclaims any responsibility for the contents of such linked sites or any link(s) contained in any such linked site(s) or any changes or updates to any of these sites. Navori SA further disclaims any responsibility for any form of transmission received from any linked site. Navori SA provides these links to you as a convenience to you and inclusion of any link herein shall in no way be construed as an endorsement by Navori SA of the site(s).
27 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
This License Agreement is a legal binding agreement between You (either an individual, an entity, or an individual accepting on behalf of the entity, who will be referred to throughout this agreement as "You" or "Your"), and Navori SA and Navori Inc. (collectively referred to herein as "Navori") for the use of certain Navori software applications, which may include associated media, printed materials, other items as made available by Navori and certain software modules ("Product").
The Product also includes any software updates and upgrades that Navori may provide to You, make available to You, or that You obtain after the ori ginal license date of the Product, to the extent that such items are not accompanied by separate license agreements or terms of use.
BY INSTALLING, COPYING, DOWNLOADING, ACCESSING OR OTHERWISE USING THE PRODUCT, YOU AGREE TO BE BOUND BY THE TERMS OF THIS
AGREEMENT. IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT, YOU HAVE NO RIGHTS TO THE PRODUCT AND SHOULD NOT INSTALL,
COPY, DOWNLOAD, ACCESS OR USE THE PRODUCT.
Notwithstanding the above, Navori prohibits You from installing, copying, downloading, accessing or otherwise using the product if You can be regarded as a competitor of Navori, , except with Navori's prior written consent.
The Product is protected by copyright and other intellectual property laws.
THE PRODUCT IS BEING LICENSED TO YOU BY NAVORI AND NOT SOLD.
1. GRANT OF LICENSE. Navori grants You a non-exclusive, non-transferable license to install and use the Product subject to all the terms and conditions set forth here within.
1.1. Single-Use Perpetual License. You may permit a single authorized end user to install the Product on a single computer for use by that end user only.
1.2. Single-Use Term License. Same usage terms as the Single-Use Perpetual License except that the term of the license is limited to a fixed duration upon expiration of which the Product must be uninstalled from the computer unless the license is renewed for an additional period of time.
2. ADDITIONAL LIMITATIONS. You may not reverse engineer, decompile, or disassemble the Product, except and only to the extent t hat it is expressly permitted by applicable law notwithstanding this limitation. You may host the Product for third parties. The Product is licensed as a single integral product; its component parts may not be separated for use on more than one computer. The Product may include copy protection technology to prevent the un authorized copying of the Product or may require original media for use of the Product on the computer. It is illegal to make unauthorized copies of the Product or to circumvent any copy protection technology included in the Product. The software may not be resold either by You or a third party customer without the prior written permission of Navori. All rights not expressly granted to You are retained by Navori.
3. Conditions of SUPPORT AND MAINTENANCE.
3.1. Terms of Maintenance. Navori agrees to provide Maintenance (as defined herein) to You pursuant to the terms and conditions set forth herein provided that You pay the Maintenance Fee (as defined herein) for each Product for which Maintenance is required and as further described in Section 3.4 below. Maintenance will be provided for a period of one year, unless otherwise agreed to by the parties in writing, from the date of purchase of the Product (the "Initial Support and Maintenance
Term"), and with renewals ("Subsequent Support and Maintenance Term" and together with the Initial Support and Maintenance Term, the "Support and Maintenance
Term"), annually from the expiration date of the prior Support and Maintenance Term. Failure to renew annual maintenance may result in You having to purchase a new license in order to receive future versions of software and associated ongoing support and maintenance.
3.2. Maintenance Services. In exchange for the annual Maintenance Fee, Navori agrees to provide to You during the term of this Agreement support and maintenance
(collectively "Maintenance") as follows:
3.2.1. Support: Navori will provide Online support to You for current versions of the Product. Navori will investigate and respond to all of Your reasonable questions and problems promptly. You agree to provide adequate information to Navori to assist in the investigation and to confirm when problems have been res olved. Navori does not provide a guaranteed response time but will make good faith efforts to answer emails and voice mails within twenty-four (24) hours or less during weekdays, excluding all holidays.
3.2.2. Maintenance: Navori will supply to You any improvements, software updates that Navori makes generally available. Any such improvements or modifications shall become part of the Product for all purposes of this Agreement.
3.2.3. You acknowledge and agree that the Maintenance to be provided by Navori hereunder is limited to the most current version of the Product and the immediately preceding version.
3.3. Exclusions. Navori's obligation to provide Maintenance is contingent upon proper use of the Product and full compliance with this Agreement. Moreover, Navori shall be under no obligation to provide Maintenance should such services be required due to (a) failure to operate the Product within the systems requirements provided for the Product (b) any modification or attempted modification of the Product by You or any third party contracted by You or Your failure or refusal to implement Product changes recommended by Navori.
3.4. Consideration. In payment of the Maintenance services to be provided by Navori hereunder, You shall pay Navori, or its authorized agent, the applicable fee for the Initial Support and Maintenance Term as indicated on the related invoice, receipt, purchase order, or other ordering document ("Initial Maintenance Fee") and the applicable fees for any Subsequent Support and Maintenance Term ("Subsequent Maintenance Fee" and together with the Initial M aintenance Fee, the "Maintenance
Fee"). At the end of the Initial Support and Maintenance Term, or any Subsequent Support and Maintenance Term, You may renew participation in Maintenance services for additional annual term(s) provided You (a) are current on all payments due to Navori and (b) pay Navori, or its authorized agent, the applicable
Maintenance fee, which Navori, or its authorized agent, shall invoice prior to the end of the preceding term, unless terminat ed by You at least 30 days prior to the expiration of the then current Support and Maintenance Term. In addition, Maintenance shall be discontinued for any and all subsequent Support and Maintenance
Terms for which You fail to pay Navori the invoice within ten (10) days after the prior Support and Maintenance Term expirati on date.
4. PAYMENT TERMS. Unless explicitly set forth in this Agreement, all fees and other amounts due under this Agreement are non-cancelable and non-refundable.
Unless otherwise agreed to by the parties, You shall pay all fees or amounts within 30 days of the date of the invoice. A lat e fee shall be charged on any overdue amounts and any other fees and expenses not paid as provided under this Agreement will be charged the rate of one and onehalf percent (1½%) per month, or the highest rate allowable under applicable law, whichever is less, commencing with the date payment was due.
5. TAXES. The fees and all other amounts due as set forth in this Agreement are net amounts to be received by Navori, exclusive of all taxes, duties, and assessments, including without limitation all sales, withholding, VAT, excise, ad valorem, and use taxes (collectively, the "Taxes"), and are not subject to offset or reduction because of any Taxes incurred by You or otherwise due as a result of this Agreement. You shall be responsible for and shall pay directly, any and all Taxes relating to the performance of this Agreement, provided that this paragraph shall not apply to taxes based solely on Navori's income.
6. CONSENT TO USE OF DATA. If Navori provides any support services to You, You agree that Navori and its affiliates may collect and use all information You provided as a part of any such support services related to the Product.
7. INTELLECTUAL PROPERTY RIGHTS. Subject to the license grant hereunder, all right, title and interest in and to the Product, the accompanying printed materials, and any copies of the Product are owned by Navori and not You.
8. WARRANTY
8.1. Warranty. Navori warrants that for a period of 90 days from the date of delivery ("Warranty Period"), under normal use, the Product will perform substantially in conformance with the specifications published in any documents provided by Navori to You with respect to the Product. During such period, and as the sole obligation of Navori and Your sole remedy under the warranty in this Section, if You provide written notice of Navori's failu re to comply with the above warranty, Navori will use reasonable commercial efforts to correct such nonconformity in the Product as in accordance with the terms of the Maintenance and Support Policy provided to You.
In addition, if Navori determines it is not commercially reasonable to correct the nonconformity, Navori may elect to terminate the license to such Product. Navori will return within 60 days to You, all license fees (and any unused support fees) paid to Navori by You for such Product. This warranty set forth above does not apply to, and Navori shall have no obligation with respect to, any non-conformity arising as a result of (i) use of the Product other than as specified under this Agreement and the related Documentation; (ii) any modification or alteration of the Product performed other than by Navori or its agents, or (iii) transfer of the Product to any computer
28 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
system other than the ones on which Product is authorized to be installed, except as permitted in this Agreement.
8.2. Disclaimer. Other than the warranty set forth in Section 8.1 above, and to the maximum extent permitted by applicable law, Navori, its authorized resellers and its subsidiaries provides the Product and any support services related to the Product ("Support Services") AS IS AND WITH ALL FAULTS, and hereby disclaim all other warranties and conditions, either express, implied or statutory, including, but not limited to, any implied warranties, duties or conditions of merchantability, of fitness for a particular purpose, of accuracy or completeness of responses, of results, of workmanlike effort, of lack of viruses, and of lack of negligence, all with regard to the Product, and the provision of or failure to provide support services.
9. LIMIT OF LIABILITY AND EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN OTHER DAMAGES. TO THE MAXIMUM EXTENT PERMITTED
BY APPLICABLE LAW, IN NO EVENT SHALL NAVORI, ITS AUTHORIZED RESELLERS OR THEIR SUBSIDIARIES BE LIABLE FOR ANY SPECIAL,
INCIDENTAL, INDIRECT, PUNITIVE OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING, BUT NOT LIMITED TO, DAMAGES FOR LOSS OF
PROFITS OR CONFIDENTIAL OR OTHER INFORMATION, FOR BUSINESS INTERRUPTION, FOR PERSONAL INJURY, FOR LOSS OF PRIVACY, FOR
FAILURE TO MEET ANY DUTY INCLUDING OF GOOD FAITH OR OF REASONABLE CARE, FOR NEGLIGENCE, AND FOR ANY OTHER PECUNIARY OR
OTHER LOSS WHATSOEVER) ARISING OUT OF OR IN ANY WAY RELATED TO THE USE OF OR INABILITY TO USE THE PRODUCT, THE PROVISION OF OR
FAILURE TO PROVIDE SUPPORT SERVICES, OR OTHERWISE UNDER OR IN CONNECTION WITH ANY PROVISION OF THIS LICENSE, EVEN IN THE
EVENT OF THE FAULT, TORT (INCLUDING NEGLIGENCE), STRICT LIABILITY, BREACH OF CONTRACT OR BREACH OF WARRANTY OF NAVORI, EVEN IF
NAVORI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
9.1. LIMITATION OF LIABILITY AND REMEDIES. Notwithstanding any damages that You might incur for any reason whatsoever (including, without limitation, all damages referenced above and all direct or general damages), the entire liability of Navori, its resellers and their subsidiaries under any provision of this Agreement and Your exclusive remedy for all of the foregoing shall be limited to the amount actually paid by You for the Product. The foregoing limitations, exclusions and disclaimers shall apply to the maximum extent permitted by applicable law, even if any remedy fails its essential purpose.
10. WHO YOU ARE CONTRACTING WITH, NOTICES, GOVERNING LAW AND JURISDICTION
10.1. General. Who You are contracting with under this Agreement will determine, who You should direct notices to under this Agreement, what law will apply in any lawsuit arising out of or in connection with this Agreement, and which courts can adjudicate any such lawsuit.
Navori Inc. 1800 McGill College Avenue, Suite 2460, Montreal, QC H3A 3J6 Canada
Navori SA World Trade Center Avenue Gratta Paille 2 CH-1000 Lausanne Switzerland
10.2. Manner of Giving Notice. Except as otherwise specified in this Agreement, all notices, permissions and approvals hereun der shall be in writing and shall be deemed to have been given upon: (i) personal delivery, (ii) the second business day after mailing, (iii) the second business day after sending by confirmed facsimile, or (iv) the first business day after sending by email (provided email shall not be sufficient for notices of termination or an indemnifiable claim).
10.3. Agreement to Governing Law and Jurisdiction. Each party agrees to the applicable governing law above without regard to choice or conflicts of law rules, and to the exclusive jurisdiction of the applicable courts above.
11. GENERAL PROVISIONS
11.1. Relationship of the Parties. The parties are independent contractors. This Agreement does not create a partnership, franchise, joint venture, agency, fiduciary or employment relationship between the parties.
11.2. Waiver and Cumulative Remedies. No failure or delay by either party in exercising any rights under this Agreement shall constitute a waiver of that right. Other than as expressly stated herein, the remedies provided herein are in addition to, and not exclusive of, any other remedies of a party at law or in equity.
11.3. Severability. If any provision of this Agreement is held by a court of competent jurisdiction to be contrary to law, th e provision shall be modified by the court and interpreted so as to best accomplish the objectives of the original provision to the fullest extent permitted by law, and the remaining provisions of this Agreement shall remain in effect.
11.4. Attorney Fees. You shall pay on demand all of Navori's reasonable attorney fees and other costs incurred by Navori to collect any fees or charges due to Navori under this Agreement.
11.5. Assignment. Neither party may assign any of its rights or obligations hereunder, whether by operation of law or otherwise, without the prior written consent of the other party (not to be unreasonably withheld). Notwithstanding the foregoing, either party may assign this Agreement in its entirety (including all Order Forms), without consent of the other party, to its Affiliate or in connection with a merger, acquisition, corporate reorganization, or sale of all or substantially all of its assets not inv olving a direct competitor of the other party. For the purpose of this Agreement, an "Affiliate" shall mean an entity that is a subsidiary entity of the other or two or more entities controlled by the same person.
11.6 This Agreement constitutes the entire agreement between the parties with respect to the Products and supersedes all prior written, oral or implied understandings between them on that subject matter. This Agreement may be amended, modified or supplemented only by a writing executed on behalf of both
Parties.
11.7 The parties acknowledge that it is their express wish that this Agreement and all related documents be prepared in English.
(Les parties aux présentes reconnaissent qu'elles ont exigé que la présente convention et tout document y afférent soient rédigés en anglais).
29 / 29
Navori QL -
Copyright © 2012, Navori SA - World Trade Center, Avenue Gratta Paille 2, CH-1000 Lausanne, Switzerland Phone: +41 21 641 19 60 www.navori.com
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Advertisement
Server and Player
Digital Signage
Content Distribution
Remote Management
Multiple Player Support
Reliable Performance
Easy Installation
Wide Media Format Support
The system requirements for Navori QL Server depend on the number of players you plan to use. For a network of 10 players or less, the minimum requirements are: Windows 8 (Professional, Enterprise), Windows 7 (Professional, Ultimate), IIS Server, SQL Server (2005, 2008, 2012) on a dedicated server, NAS High Efficiency, RAM 4Gb, and SQL Express, For more than 10 players, please contact Navori and provide the required information.
You must configure your SQL account login so that it uses Mixed Mode (Windows and SQL Server authentication). You must create a new SQL-Based (SQL Server Authentication) user, make sure the password will not expire, the language is set to English, and the default database is master. You must also assign the following roles: dbcreator, public and sysadmin under Server Roles and db_accessadmin, db_owner and public under User Mapping.
After the installation is complete, you can log in using the default administrator account, change the default Administrator password, and log in using the extranet account.
What are the default login credentials?
The default login for the Root Level Administrator account is: User Name: Administrator; Password: VD293330. These credentials are case-sensitive. It is strongly recommended to change the default administrator password as soon as possible for security reasons.
Login to continue
