Biostar P4M890-M7 FE Owner's Manual

P4M900-M7 FE/P4M890-M7 FE Setup Manual
FCC Information and Copyright
This equipment has been tes ted and found to comply with the limits of a Class
B digital devic e, purs uant to Part 15 of the FCC Rules . T hese limits are designed
to provide reasonable protec tion against harmful interference in a residential
installation. T his equipment generates , uses , and c an radiate radio frequency
energy and, if not ins talled and used in accordance with the instructions , may
cause harmful interference to radio communications . There is no guarantee
that interference will not occur in a particular ins tallation.
The vendor makes no representations or warranties with respec t to the
contents here and s pecially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make c hanges to the c ontents here without obligation to
notify any party beforehand.
D uplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor’s approval in writing.
The content of this user’s manual is subject to be c hanged without notice and
we will not be res ponsible for any mis takes found in this user’s manual. All the
brand and produc t names are trademarks of their respec tive companies .
Table of Contents
Chapter 1: Introduction.....................................................3
1.1
Before You Start................................................................... 3
1.2
Package Checklist................................................................ 3
1.3
Motherboard Features.......................................................... 4
1.4
Rear Panel Connectors.......................................................... 5
1.5
Motherboard Layout ............................................................ 6
Chapter 2: Hardware Installation........................................7
2.1
Installing Central Processing Unit (CPU) ................................ 7
2.2
Fan Headers......................................................................... 9
2.3
Installing System Memory.....................................................10
2.4
Connectors and Slots ............................................................12
Chapter 3: Headers & Jumpers Setup................................. 14
3.1
How to Setup Jumpers..........................................................14
3.2
Detail Settings.....................................................................14
Chapter 4: RAID Functions ............................................... 20
4.1
Operation System................................................................20
4.2
Raid Arrays.........................................................................20
4.3
How RAID Works.................................................................20
Chapter 5: Useful Help ..................................................... 22
5.1
Driver Installation Note .......................................................22
5.2
Award BIOS Beep Code........................................................23
5.3
Extra Information................................................................23
5.4
Troubleshooting...................................................................24
A ppendencies: SPEC In Other Language............................. 26
German................................................................................................26
France..................................................................................................28
Italian..................................................................................................30
Spanish ................................................................................................32
Portuguese...........................................................................................34
Polish...................................................................................................36
Russian ................................................................................................38
Arabic..................................................................................................40
Japanese ..............................................................................................42
P4M900-M7 FE/P4M890-M7 FE
CHAPTER 1: INTRODUCTION
1.1 BEFORE YOU ST ART
Thank you for choosing our product. Be fore you start installing the
mothe rboard, please make sure you follow the instructions be low:
„ Prepare a dry and stable work ing environment with
sufficie nt lighting.
„ Always disconne ct the compute r from powe r outle t
be fore ope ration.
„ Before you take the mothe rboard out from anti-static
bag, ground yourse lf prope rly by touching any safe ly
grounde d appliance, or use grounded wrist strap to
remove the static charge.
„ Avoid touching the compone nts on mothe rboard or the
rear side of the board unless ne cessary. Hold the board
on the edge , do not try to be nd or flex the board.
„
„
1.2
Do not leave any unfastene d small parts inside the
case afte r installation. Loose parts will cause short
circuits which may damage the equipment.
Keep the compute r from dange rous a rea, such as hea t
source , humid air and wate r.
PACKAGE CHECKLIST
HDD Cable X 1
Installation Guide X 1
Fully Se tup Drive r C D X 1 (full ve rsion manual files inside )
Rear I/O Panel for ATX Case X 1
FDD Cable X 1 (optional)
Se rial ATA Cable X 1 (optional)
USB 2.0 Cable X1 (optional)
Se rial ATA Powe r Cable X 1 (optional)
Note: The package contents may differ by area or your motherboard version.
3
Motherboard Manual
1.3
MOT HERBOARD FEAT URES
P4M900-M7 FE
P4M890-M7 FE
LGA 775
LGA 775
Intel Core2Duo/ Pe ntium 4 / Pentium D /
Intel Core2Duo/ Pe ntium 4 / Pentium D /
Celeron D / Cel eron 4xx pr ocessor up to 3.8 Celeron D / Cel eron 4xx pr ocessor up to 3.8
GHz
CPU
GHz
*It is recommende d to use processors with *It is recommende d to use processors with
95W power co nsumption.
95W power co nsumption.
Supports Hyper Thre ading/ Ex ecute Disable Supports Hyper Thre ading/ Ex ecute Disable
FSB
Chipset
Graphic
Super I/O
Bit/ Enhanced Intel S peedStep®/ Intel
Bit/ Enhanced Intel S peedStep®/ Intel
Extende d Memor y 64 technolo gy
Extende d Memor y 64 technolo gy
533 / 800 / 1066 MHz
533 / 800 / 1066 MHz
VIA P4M900
VIA P4M890
VIA VT8237A
VIA VT8237A
Chrome9 HC 3D / 2D Graphics
Chrome9 HC 3D / 2D Graphics
Max Share d Vide o Memory is 256 MB
Max Share d Vide o Memory is 256 MB
ITE 8712F
ITE 8712F
Provides the most commonly used legacy
Provides the most commonly used legacy
Super I/O functionality.
Super I/O functionality.
Low Pin C ount Interface
Low Pin C ount Interface
Enviro nment Co ntrol initiatives,
Enviro nment Co ntrol initiatives,
H/W Monitor
H/W Monitor
Fan Spee d Co ntroller
Fan Spee d Co ntroller
ITE's "Smart Guardia n" function
ITE's "Smart Guardia n" function
DIMM Slots x 2
DIMM Slots x 2
Supports DDR2 533 / 667
Supports DDR2 533 / 667
Each DIMM supports 256/ 512MB/1GB/ 2GB Each DIMM supports 256/ 512MB/1GB/ 2GB
Main
Memory
IDE
SATA
LAN PHY
Sound
Codec
4
DDR2
DDR2
Max Memory C apicity 4GB
Max Memory C apicity 4GB
Single Channel Mode DDR2 memory
Single Channel Mode DDR2 memory
module
module
Registered DIMM and ECC DIMM is not
Registered DIMM and ECC DIMM is not
supported
supported
Integrated I DE Controller
Integrated I DE Controller
Ultra DMA 33~133 B us Master Mode
Ultra DMA 33~133 B us Master Mode
supports PIO Mo de 0~4,
supports PIO Mo de 0~4,
Integrated Seri al ATA Controller
Integrated Seri al ATA Controller
Data transfer rates up to 1.5 Gb/s.
Data transfer rates up to 1.5 Gb/s.
SATA Version 1.0 specification complia nt.
SATA Version 1.0 specification complia nt.
Realtek RTL 8201CL PH Y
Realtek RTL 8201CL PH Y
10 / 100 Mb/s auto negotiation
10 / 100 Mb/s auto negotiation
Half / Full duplex capability
Half / Full duplex capability
ALC662
ALC662
5.1 cha nnels a udio o ut
5.1 cha nnels a udio o ut
High- Defi nition Audio s upport
High- Defi nition Audio s upport
P4M900-M7 FE/P4M890-M7 FE
P4M900-M7 FE
Slots
On Board
Connector
Back Panel
I/O
P4M890-M7 FE
PCI Expr ess x 16 slot
x1
PCI Expr ess x 16 slot
x1
PCI Expr ess x 1 slot
x1
PCI Expr ess x 1 slot
x1
PCI slot
x2
PCI slot
x2
Floppy connector
x1
Floppy connector
x1
Printer Port C onnector
x1
Printer Port C onnector
x1
IDE Co nnector
x2
IDE Co nnector
x2
SATA Connector
x2
SATA Connector
x2
Front Pa nel Co nnector
x1
Front Pa nel Co nnector
x1
Front Audi o Co nnector
x1
Front Audi o Co nnector
x1
CD-in Co nnector
x1
CD-in Co nnector
x1
CPU Fan hea der
x1
CPU Fan hea der
x1
System Fan hea der
x1
System Fan hea der
x1
Clear CMOS header
x1
Clear CMOS header
x1
USB connector
x2
USB connector
x2
Power Connector ( 24pi n)
x1
Power Connector ( 24pi n)
x1
Power Connector ( 4pin)
x1
Power Connector ( 4pin)
x1
PS/2 Keyboard
x1
PS/2 Keyboard
x1
PS/2 Mo use
x1
PS/2 Mo use
x1
Serial Port
x1
Serial Port
x1
VGA Port
x1
VGA Port
x1
LAN port
x1
LAN port
x1
USB Port
x4
USB Port
x4
Audio J ack
x3
Audio J ack
x3
Board Size 190 mm (W) x 244 mm (L)
Special
Feature
OS
Support
1.4
190 mm (W) x 244 mm (L)
RAID 0 / 1 support
RAID 0 / 1 support
Windows 2000 / XP / VISTA
Windows 2000 / XP
Biostar Reserves the right to add or remo ve Biostar Reserves the right to add or remove
support for any OS with or witho ut notice. support for any OS with or witho ut notice.
REAR PANEL CONNECT ORS
LAN
PS/2
Mouse
Li ne In/
Surround
Line Out
Mic In 1/
Bass/ Center
PS/2
Keyboard
COM1
VGA
USBX2
USBX2
Since the audio c hip s upports High Definiti on Audio Specific ation, the func tion of eac h audi o
jack c an be defined by software. T he input / output function of each audio jac k listed above
represents the default s etti ng. However, when c onnecti ng exter nal microphone to the audio
port, pleas e us e the Line In (blue) and Mic In (Pink) audio j ac k.
5
Motherboard Manual
1.5
MOT HERBOARD LAYOUT
JCFAN1
JKBMS1
COM1
JCOM1
LGA775
CPU1
DIMM1
JVGA1
JPRNT1
JATXPWR2
JUSBLAN1
P4M900
or
P4M890
IDE2
JUSBV1
IDE1
JUSB1
DIMM2
JATXPWR1
LAN
JAUDIO1
PCI-EX16
Super
I/O
PCI-EX1_1
BAT1
BIOS
JSATA2
JU SB2
VIA
VT8237A
PCI1
JCDIN1
JSATA1
JUSB3
PCI2
JUSBV2
JCMOS1
Codec
JAUDIOF1
FDD1
JSFAN1
JPAN EL 1
Not e: ■ represe nts the 1st pin.
6
P4M900-M7 FE/P4M890-M7 FE
CHAPTER 2: HARDWARE INSTALLATION
2.1 INST ALLING CENT RAL PROCESSING UNIT (CPU)
Special Notice:
Remove Pin Cap before installation, and make good preservation
for future use. When the CPU is removed, cover the Pin Cap on the
empty socket to ensure pin legs won’t be damaged.
Pin Cap
Step 1: Pull the socket locking lever out from the socket and then raise
the lever up to a 90-degree angle.
7
Motherboard Manual
Step 2: Look for the triangular cut edge on socket, and the golden dot on
CPU should point forwards this triangular cut edge. The CPU will
fit only in the correct orientation.
Step 2-1:
Step 2-2:
Step 3: Hold the CPU down firmly, and then lower the lever to locked
position to complete the installation.
Step 4: Put the CPU Fan and heatsink assembly on the CPU and buckle it
on the retention frame. Connect the CPU FAN power cable into
the JCFAN1. This completes the installation.
8
P4M900-M7 FE/P4M890-M7 FE
2.2
FAN HEADERS
These fan headers support cooling-fans built in the computer. The fan
cable and connector may be different according to the fan manufacturer.
Connect the fan cable to the connector while matching the black wire to
pin#1.
JCFAN1: CPU Fan Heade r
4
1
Pin
1
2
3
4
Assignment
Ground
+12V
FAN RPM rate
sense
Smart Fan
Control
JSFAN1: System Fan He ader
Pin
1
2
3
3
Assignment
Ground
+12V
FAN RPM rate
sense
1
Note:
The JSFAN1 supports 3-pin head connector and the JCFAN1 supports 4-pin head
connector. When connecti ng with wires onto connectors, pl ease note that the r ed wire is
the positi ve and should be connected to pin#2, and the black wire is Ground and should
be connected to GND.
9
Motherboard Manual
2.3
INST ALLING SYST EM MEMORY
DIMM1
DIMM2
A. Memory Modules
1.
10
Unlock a DIMM slot by pressing the retaining clips outward. Align a
DIMM on the slot such that the notch on the DIMM matches the
break on the Slot.
P4M900-M7 FE/P4M890-M7 FE
2.
Insert the DIMM vertically and firmly into the slot until the retaining
chip snap back in place and the DIMM is properly seated.
B. Memory Capacity
DIMM Socket
Location
DIMM1
256MB/512MB/1GB/2GB
DIMM2
256MB/512MB/1GB/2GB
DDR2 Module
Total Memory
Size
Max is 4GB.
11
Motherboard Manual
2.4
CONNECT ORS AND SLOT S
FDD1: Floppy Disk Conne ctor
The motherboard prov ides a standard floppy disk connector that supports 360K,
720K, 1.2M, 1.44M and 2.88M floppy disk ty pes. This connector supports the
prov ided f loppy drive ribbon cable.
2
34
1
33
IDE1/IDE2: Hard Disk Conne ctors
The motherboard has a 32-bit Enhanced PCI IDE Controller that prov ides PIO
Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 f unctionality. It has two
HDD connectors: IDE1 (primary ) and IDE2 (secondary ).
The IDE connectors can connect a master and a slav e driv e, so you can
connect up to four hard disk drives. The f irst hard drive should always be
connected to IDE1.
40
39
2
1
IDE1
12
IDE2
P4M900-M7 FE/P4M890-M7 FE
PCI-EX16: PCI-Express x16 Slot
-
PCI-Express 1.0a compliant.
-
Maximum theoretical realized bandwidth of 4GB/s simultaneously per
direction, f or an aggregate of 8GB/s totally.
PCI-EX1_1: PCI-Express x1 Slot
-
PCI-Express 1.0a compliant.
-
Data transf er bandwidth up to 250MB/s per direction; 500MB/s in total.
PCI-Express supports a raw bit-rate of 2.5Gb/s on the data pins.
2X bandwidth ov er the traditional PCI architecture.
PCI-EX16
PCI-EX1_1
PCI1/PCI2: Pe riphe ral Component Inte rconne ct Slots
This motherboard is equipped with 2 standard PCI slots. PCI stands f or
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.
PCI1
PCI2
13
Motherboard Manual
CHAPTER 3: HEADERS & JUMPERS SETUP
3.1 HOW T O SET UP JUMPERS
The illustration shows how to set up jumpers. When the jumper cap is
placed on pins, the jumper is “close”, if not, that means the jumper is
“open”.
Pin opened
3.2
Pin closed
Pin1-2 closed
DET AIL SETT INGS
JPANEL1: Front Panel Heade r
This 16-pin connector includes Power-on, Reset, HDD LED, Power LED, and
speaker connection. It allows user to connect the PC case’s front panel switch
f unctions.
PWR_LED
On/Off
++ -
9
1
+ SPK
Pin
1
2
3
4
5
6
7
8
14
Assignment
+5V
N/A
N/A
Speaker
HDD LED (+)
HDD LED (-)
Ground
Reset control
Functio n
Speaker
Connector
Hard drive
LED
Reset button
Pin
9
10
11
12
13
14
15
16
16
8
RST
HLED
Assignment
N/A
N/A
N/A
Power LED (+)
Power LED (+)
Power LED (-)
Power button
Ground
Functio n
N/A
N/A
Power LED
Power-on button
P4M900-M7 FE/P4M890-M7 FE
ATX Powe r Source Conne ctor: JATXPWR1
JATXPWR1 allows user to connect 24-pin power connector on the ATX power
supply.
Pin
13
14
15
16
17
18
19
20
21
22
23
24
Assignment
+3.3V
-12V
Ground
PS_ON
Ground
Ground
Ground
NC
+5V
+5V
+5V
Ground
12
24
1
13
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Assignment
+3.3V
+3.3V
Ground
+5V
Ground
+5V
Ground
PW_OK
Standby Voltage+5V
+12V
+12V
+3.3V
JATXPWR2: ATX Powe r Source Conne ctor
By connecting this connector, it will provide +12V to CPU power circuit.
1
4
2
3
Pin
1
2
3
4
Assignment
+12V
+12V
Ground
Ground
Note:
Befor e power on the system, please make sure that both JATXPWR1 and JATXPWR2
connectors have been pl ugged-in.
15
Motherboard Manual
JUSB2/JUSB3: Heade rs for USB 2.0 Ports at Front Panel
This header allows user to connect additional USB cable on the PC f ront panel,
and also can be connected with internal USB devices, like USB card reader.
2
10
JUSB2
1
9
JUSB3
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
+5V (fused)
+5V (fused)
USBUSBUSB+
USB+
Ground
Ground
Key
NC
JSATA1/JSATA2: Se rial ATA Conne ctors
The motherboard has a PCI to SATA Controller with 2 channels SATA interf ace,
it satisfies the SATA 1.0 spec and with transfer rate of 1.5Gb/s.
JSATA2
7
4
1
1
4
7
Pin
1
2
3
4
5
6
7
Assignment
Ground
T X+
T XGround
RXRX+
Ground
JSATA1
JAUDIO F1: Front Panel Audio Heade r
This header allows user to connect the front audio output cable with the PC f ront
panel. This header allows only HD audio front panel connector; AC’97 connector
is not acceptable.
16
2
10
1
9
Pin
1
2
3
4
5
6
7
8
9
10
Assignment
Mic Left in
Ground
Mic Right in
GPIO
Right line in
Jack Sense
Front Sense
Key
Left line in
Jack Sense
P4M900-M7 FE/P4M890-M7 FE
JCDIN1: CD-RO M Audio-in Connector
This connector allows user to connect the audio source f rom the v ariaty dev ices,
like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card etc.
Assignment
Left Channel Input
Ground
Ground
Right Channel Input
Pin
1
2
3
4
4
1
JCMO S1: Cle ar CMOS Heade r
By placing the jumper on pin2-3, it allows user to restore the BIOS saf e setting
and the CMOS data, please carefully f ollow the procedures to avoid damaging
the motherboard.
1
3
Pin 1-2 Close:
Normal Operation (default).
1
1
3
3
Pin 2-3 Close:
Clear CMOS data.
※ Clear CMOS Proce dures:
1.
2.
3.
4.
5.
6.
Remov e AC power line.
Set the jumper to “Pin 2-3 close”.
Wait f or f ive seconds.
Set the jumper to “Pin 1-2 close”.
Power on the AC.
Reset y our desired password or clear the CMOS data.
17
Motherboard Manual
JPRNT1: Printe r Port Connector
This header allows you to connector printer on the PC.
25
2
18
Assignment
1
Pin
1
-Strobe
Pin
14
Ground
Assignment
2
3
4
5
-ALF
Data 0
-Error
Data 1
15
16
17
18
Data 6
Ground
Data 7
Ground
6
7
8
9
-Init
Data 2
-Scltin
Data 3
19
20
21
22
-ACK
Ground
Busy
Ground
10
11
12
13
Ground
Data 4
Ground
Data 5
23
24
25
26
PE
Ground
SCLT
Key
P4M900-M7 FE/P4M890-M7 FE
JUSBV1/JUSBV2: Powe r Source Heade rs for USB Ports
Pin 1-2 Close:
JUSBV1: +5V for USB ports at JUSB1/JUSBLAN1.
JUSBV2: +5V for USB ports at f ront panel (JUSB2/JUSB3).
Pin 2-3 Close:
JUSBV1: +5V STB for USB ports at JUSB1/JUSBLAN1.
JUSBV2: +5V STB for USB ports at f ront panel (JUSB2/JUSB3).
1
JUSBV1
1
3
Pin 1-2 close
3
JUSBV2
1
3
Pin 2-3 close
1
3
19
Motherboard Manual
CHAPTER 4: RAID FUNCTIONS
4.1 O PERAT ION SYST EM
Supports Windows XP, Windows 2000 Professional, and Windows Vista.
4.2
RAID ARRAYS
RAID supports the following types of RAID arrays:
RAID 0: RAID 0 defines a disk striping scheme that improves disk read and write times for
many applications.
RAID 1: RAID 1 defines techniques for mirroring data.
4.3
HOW RAID WORKS
RAID 0:
The controller “ stripes” data across multiple drives in a RAID 0 array system. It breaks
up a large file into smaller blocks and performs disk reads and writes across multiple
drives in parallel. The size of each block is determined by the stripe size parameter,
which you set during the creation of the RAID set based on the system environment. This
technique reduces overall disk access time and offers high bandwidth.
Features and Benefits
­
­
­
­
­
Drives: Minimum 2, and maximum is up to 6 or 8. Depending on the
platf orm.
Uses: Intended for non-critical data requiring high data throughput, or any
env ironment that does not require f ault tolerance.
Benefits: prov ides increased data throughput, especially f or large files. No
capacity loss penalty f or parity.
Drawbacks: Does not deliver any fault tolerance. If any drive in the array
f ails, all data is lost.
Fault Tolerance: No.
Blo ck 1
Block 3
Block 5
20
Block 2
Block 4
Block 6
P4M900-M7 FE/P4M890-M7 FE
RAID 1:
Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1
array system. The mirrored (backup) copy of the data can reside on the same disk or on a
second redundant drive in the array. RAID 1 provides a hot-standby copy of data if the
active volume or drive is corrupted or becomes unavailable because of a hardware failure.
RAID techniques can be applied for high-availability solutions, or as a form of automatic
backup that eliminates tedious manual backups to more expensive and less reliable
media.
Features and Benefits
­
­
­
­
­
Drives: Minimum 2, and maximum is 2.
Uses: RAID 1 is ideal f or small databases or any other application that
requires f ault tolerance and minimal capacity.
Benefits: Prov ides 100% data redundancy. Should one driv e f ail, the
controller switches to the other drive.
Drawbacks: Requires 2 driv es for the storage space of one driv e.
Perf ormance is impaired during driv e rebuilds.
Fault Tolerance: Yes.
Block 1
Block 2
Block 3
Block 1
Block 2
Block 3
21
Motherboard Manual
CHAPTER 5: USEFUL HELP
5.1 DRIVER INST ALLAT ION NOT E
After you installed your operating system, please insert the Fully Setup
Driver CD into your optical drive and install the driver for better system
performance.
You will see the following window after you insert the CD
The setup guide will auto detect your motherboard and operating system.
Note:
If this window didn’t show up after you insert the Driver CD, please use file browser to
locate and execute the file SETUP.EXE under your optical drive.
A. Driver Installation
To install the driver, please click on the Driver icon. The setup guide will
list the compatible driver for your motherboard and operating system.
Click on each device driver to launch the installation program.
B. Software Installation
To install the software, please click on the Software icon. The setup guide
will list the software available for your system, click on each software title
to launch the installation program.
C. Manual
Aside from the paperback manual, we also provide manual in the Driver
CD. Click on the Manual icon to browse for available manual.
Note:
You will need Acrobat Reader to open the manual file. Please download the latest version
of Acrobat Reader software from
http://www.adobe.com/products/acrobat/readstep 2.html
22
P4M900-M7 FE/P4M890-M7 FE
5.2
AWARD BIOS BEEP CODE
Beep Sound
One long beep followed by two short
beeps
High-low siren sound
Meaning
Video card not found or v ideo card
memory bad
CPU overheated
System will shut down automatically
One Short beep when system boot-up No error found during POST
Long beeps every other second
No DRAM detected or install
5.3
EXT RA INFORMAT ION
CPU Overheated
If the system shutdown automatically after power on system for
seconds, that means the CPU protection function has been activated.
When the CPU is over heated, the motherboard will shutdown
automatically to avoid a damage of the CPU, and the system may not
power on again.
In this case, please double check:
1. The CPU cooler surface is placed evenly with the CPU surface.
2. CPU fan is rotated normally.
3. CPU fan speed is fulfilling with the CPU speed.
After confirmed, please follow steps below to relief the CPU protection
function.
1. Remove the power cord from power supply for seconds.
2. Wait for seconds.
3. Plug in the power cord and boot up the system.
Or you can:
1. Clear the CMOS data.
(See “Close CMOS Header: JCMOS1” section)
2. Wait for seconds.
3. Power on the system again.
23
Motherboard Manual
5.4
TROUBLESHOOT ING
Probable
Solution
1.
Make sure power cable is
No power to the system at all
securely plugged in.
Power light don’t illuminate, f an
inside power supply does not turn 2.
Replace cable.
on.
3.
Contact technical support.
2.
Indicator light on key board does
not turn on.
System inoperativ e. Keyboard lights
Using even pressure on both ends of
are on, power indicator lights are lit,
the DIMM, press down firmly until the
and hard driv e is spinning.
module snaps into place.
1.
System does not boot from hard disk
1.
driv e, can be booted f rom optical driv e.
Check cable running from disk to
disk controller board. Make sure
both ends are securely plugged
in; check the driv e type in the
standard CMOS setup.
2.
Backing up the hard drive is
extremely important. All hard
disks are capable of breaking
down at any time.
1.
Back up data and applications
System only boots f rom optical driv e.
f iles.
Hard disk can be read and applications
can be used but booting from hard disk 2.
Ref ormat the hard driv e.
is impossible.
Re-install applications and data
using backup disks.
Screen message says “Invalid
Rev iew system’s equipment. Make sure
Conf iguration” or “CMOS Failure.”
correct inf ormation is in setup.
Cannot boot system after installing
1.
Set master/slave jumpers
second hard driv e.
correctly.
2.
Run SETUP program and select
correct driv e types. Call the drive
manuf acturers f or compatibility
with other drives.
24
P4M900-M7 FE/P4M890-M7 FE
This page is intentionally left blank.
25
Motherboard Manual
APPENDENCIES: SPEC IN OTHER LANGUAGE
GERMAN
P4M900-M7 FE
P4M890-M7 FE
LGA 775
LGA 775
Intel Core2Duo/ Pe ntium 4 / Pentium D /
Intel Core2Duo/ Pe ntium 4 / Pentium D /
Celeron D / Celer on 4xx Prozessoren mit bis Celeron D / Celer on 4xx Prozessoren mit bis
zu 3,8 GHz
CPU
zu 3,8 GHz
*It is recommende d to use processors with *It is recommende d to use processors with
95W power co nsumption.
95W power co nsumption.
Unterstützt Hyper-Thre ading / Execute
Unterstützt Hyper-Thre ading / Execute
Disable Bit / Enha nced I ntel Spee dStep® / Disable Bit / Enha nced I ntel Spee dStep® /
FSB
Chipsatz
Grafik
Super E/A
Intel Architecture-64 / Extended Memory
Intel Architecture-64 / Extended Memory
64 Technology
64 Technology
533 / 800 / 1066 MHz
533 / 800 / 1066 MHz
VIA P4M900
VIA P4M890
VIA VT8237A
VIA VT8237A
Chrome9 HC 3D / 2D Graphics
Chrome9 HC 3D / 2D Graphics
Max. 256MB gemei nsam be nutzter
Max. 256MB gemei nsam be nutzter
Videospeicher
Videospeicher
ITE 8712F
ITE 8712F
Bietet die häufi g verwe ndete n alte n Super
Bietet die häufi g verwe ndete n alte n Super
E/A-Funktio nen.
E/A-Funktio nen.
Low Pin C ount-Schnittstelle
Low Pin C ount-Schnittstelle
Umgebungskontrolle,
Umgebungskontrolle,
Hardware-Überwachung
Hardware-Überwachung
Lüfterdre hzahl-Co ntroller
Lüfterdre hzahl-Co ntroller
"Smart Guar dian" -Funktion v on ITE
"Smart Guar dian" -Funktion v on ITE
DDR2 DIMM-Steckplätze x 2
DDR2 DIMM-Steckplätze x 2
Unterstützt DDR2 533 / 667
Unterstützt DDR2 533 / 667
Jeder DIMM unterstützt
Jeder DIMM unterstützt
Arbeitsspe 256/512MB/1GB/2GB DDR2.
256/512MB/1GB/2GB DDR2.
icher
Max. 4GB Ar beitsspeicher
Max. 4GB Ar beitsspeicher
Ein-Kanal DDR2 S peichermodul
Ein-Kanal DDR2 S peichermodul
registrierte DIMMs. ECC DIMMs werde n
registrierte DIMMs. ECC DIMMs werde n
nicht unterstützt.
nicht unterstützt.
Integrierter IDE-Co ntroller
Integrierter IDE-Co ntroller
Ultra DMA 33 / 66 / 100 / 133Bus
Ultra DMA 33 / 66 / 100 / 133Bus
Master-Modus
Master-Modus
Unterstützt PIO-Modus 0~4,
Unterstützt PIO-Modus 0~4,
Integrierter Serial ATA-Controller
Integrierter Serial ATA-Controller
Datentransferr ate bis zu 1.5Gb/s
Datentransferr ate bis zu 1.5Gb/s
IDE
SATA
Konform mit der SATA-Spezifikation Version Konform mit der SATA-Spezifikation Version
1.0.
26
1.0.
P4M900-M7 FE/P4M890-M7 FE
P4M900-M7 FE
LAN PHY
Audio-Cod
ec
Steckplätz
e
Onboard-A
nschluss
Rückseiten
-E/A
Platinengr
öße.
Sonderfun
ktionen
OS-Unters
tützung
P4M890-M7 FE
Realtek RTL 8201CL PH Y
Realtek RTL 8201CL PH Y
10 / 100 Mb/s A uto-Negotiation
10 / 100 Mb/s A uto-Negotiation
Halb-/ Vollduplex- Funktion
Halb-/ Vollduplex- Funktion
ALC662
ALC662
Unterstützt High- Definitio n Audio
Unterstützt High- Definitio n Audio
5.1-Kanal-Audioausgabe
5.1-Kanal-Audioausgabe
PCI-Steckplatz
x2
PCI-Steckplatz
PCI Expr ess x16 Steckplatz
x1
PCI Expr ess x16 Steckplatz
x2
x1
PCI Expr ess x 1-Steckplatz
x1
PCI Expr ess x 1-Steckplatz
x1
Diskettenlaufwerk anschluss
x1
Diskettenlaufwerk anschluss
x1
Druckeranschluss Anschluss
x1
Druckeranschluss Anschluss
x1
IDE-Anschluss
x2
IDE-Anschluss
x2
SATA-Anschluss
x2
SATA-Anschluss
x2
Fronttafela nschluss
x1
Fronttafela nschluss
x1
Front-Audioa nschluss
x1
Front-Audioa nschluss
x1
CD-IN-Anschluss
x1
CD-IN-Anschluss
x1
CPU-Lüfter-Sockel
x1
CPU-Lüfter-Sockel
x1
System-Lüfter-Sockel
x1
System-Lüfter-Sockel
x1
"CMOS löschen"-Sockel
x1
"CMOS löschen"-Sockel
x1
USB-Anschluss
x2
USB-Anschluss
x2
Stromanschluss (24- polig)
x1
Stromanschluss (24- polig)
x1
Stromanschluss (4-poli g)
x1
Stromanschluss (4-poli g)
x1
PS/2-Tastatur
x1
PS/2-Tastatur
x1
PS/2-Maus
x1
PS/2-Maus
x1
Serieller Anschluss
x1
Serieller Anschluss
x1
VGA-Anschluss
x1
VGA-Anschluss
x1
LAN-Anschluss
x1
LAN-Anschluss
x1
USB-Anschluss
x4
USB-Anschluss
x4
Audioanschluss
x3
Audioanschluss
x3
190 mm (B) X 244 mm (L)
190 mm (B) X 244 mm (L)
Unterstützt RAID 0 / 1
Unterstützt RAID 0 / 1
Windows 2K / XP / VISTA
Windows 2K / XP
Biostar behält sich das Recht v or, ohne
Biostar behält sich das Recht v or, ohne
Ankündigung die Unterstützung für ei n
Ankündigung die Unterstützung für ei n
Betriebssystem hinzuzufügen oder zu
Betriebssystem hinzuzufügen oder zu
entfernen.
entfernen.
27
Motherboard Manual
FRANCE
P4M900-M7 FE
P4M890-M7 FE
LGA 775
LGA 775
Processeurs Intel Core 2Duo/ P entium 4 /
Processeurs Intel Core 2Duo/ P entium 4 /
Pentium D / Celeron D / Celeron 4xx jusqu'à Pentium D / Celeron D / Celeron 4xx jusqu'à
3,8 GHz
3,8 GHz
*It is recommende d to use processors with *It is recommende d to use processors with
UC
95W power co nsumption.
95W power co nsumption.
Prend en charge les technologies
Prend en charge les technologies
Hyper -Thre ading / d'ex écution de bit de
Hyper -Thre ading / d'ex écution de bit de
désactivation / I ntel Spe edStep®
désactivation / I ntel Spe edStep®
optimisée/ d'architecture I ntel 64 / de
optimisée/ d'architecture I ntel 64 / de
mémoire étendue 64
mémoire étendue 64
Bus frontal 533 / 800 / 1066 MHz
Chipset
Graphi que
s
533 / 800 / 1066 MHz
VIA P4M900
VIA P4M890
VIA VT8237A
VIA VT8237A
Chrome9 HC 3D / 2D Graphics
Chrome9 HC 3D / 2D Graphics
Mémoire vidé o partagée maximale de 256 Mémoire vidé o partagée maximale de 256
Mo
Mo
ITE 8712F
ITE 8712F
Fournit la fo nctionnalité de Super E/S
Fournit la fo nctionnalité de Super E/S
patrimoniales la plus utilisée.
patrimoniales la plus utilisée.
Interface à faible compte de broc hes
Interface à faible compte de broc hes
Initiatives de co ntrôle e nvironnementales,
Initiatives de co ntrôle e nvironnementales,
Moniteur de matériel
Moniteur de matériel
Contrôleur de vitesse de ventilateur
Contrôleur de vitesse de ventilateur
Fonction " Gardie n i ntelligent" de l'ITE
Fonction " Gardie n i ntelligent" de l'ITE
Fentes DDR 2 DIMM x 2
Fentes DDR 2 DIMM x 2
Prend en charge la DDR 2 533 / 667
Prend en charge la DDR 2 533 / 667
Chaque DIMM prend e n charge des DDR2
Chaque DIMM prend e n charge des DDR2
de 256 Mo /512 M o / 1Go / 2 Go
de 256 Mo /512 M o / 1Go / 2 Go
Mémoire
Capacité mémoire maximale de 4 Go
Capacité mémoire maximale de 4 Go
principale
Module de mémoire DDR2 à mode à simple Module de mémoire DDR2 à mode à simple
Super E/S
voie
voie
Les DIMM à r egistres et DIMM avec code
Les DIMM à r egistres et DIMM avec code
correcteurs d'erreurs ne so nt pas prises en correcteurs d'erreurs ne so nt pas prises en
IDE
SATA
28
charge
charge
Contrôleur IDE intégr é
Contrôleur IDE intégr é
Mode pri ncipale de Bus Ultra DMA 33 / 66 / Mode pri ncipale de Bus Ultra DMA 33 / 66 /
100 / 133
100 / 133
Prend en charge le mode PIO 0~4,
Prend en charge le mode PIO 0~4,
Contrôleur Serial ATA intégré
Contrôleur Serial ATA intégré
Taux de transfert jusqu'à 1.5 Go/s.
Taux de transfert jusqu'à 1.5 Go/s.
Conforme à la spécification SATA Version
Conforme à la spécification SATA Version
1.0
1.0
P4M900-M7 FE/P4M890-M7 FE
P4M900-M7 FE
LAN PHY
Codec
audio
Fentes
P4M890-M7 FE
Realtek RTL 8201CL PH Y
Realtek RTL 8201CL PH Y
10 / 100 Mb/s négociation a utomatique
10 / 100 Mb/s négociation a utomatique
Half / Full duplex capability
Half / Full duplex capability
ALC662
ALC662
Prise en c harge de l'audio haute dé finition
Prise en c harge de l'audio haute dé finition
Sortie audio à 5.1 voies
Sortie audio à 5.1 voies
Fente PCI
x2
Fente PCI
x2
Slot PCI Ex press x16
x1
Slot PCI Ex press x16
x1
Slot PCI Ex press x 1
x1
Slot PCI Ex press x 1
x1
Connecteur de disquette
x1
Connecteur de disquette
x1
Connecteur de P ort d'imprimante x1
Connecteur de P ort d'imprimante x1
Connecteur IDE
x2
Connecteur IDE
Connecteur SATA
x2
Connecteur SATA
x2
Connecteur du pa nne au avant
x1
Connecteur du pa nne au avant
x1
Connecteur Audio du panneau ava nt x1
Connecteu Connecteur d'entré e CD
r
Embase de ve ntilateur UC
x2
Connecteur Audio du panneau ava nt x1
x1
Connecteur d'entré e CD
x1
x1
Embase de ve ntilateur UC
x1
embarqué Embase de ve ntilateur système x1
Embase de ve ntilateur système x1
Embase d'e ffacement CMOS
x1
Embase d'e ffacement CMOS
x1
Connecteur USB
x2
Connecteur USB
x2
Connecteur d'alimentatio n
x1
Connecteur d'alimentatio n
x1
(24 broches)
Connecteur d'alimentatio n
(24 broches)
x1
(4 br oches)
Connecteur d'alimentatio n
x1
(4 br oches)
Clavier PS/2
x1
Clavier PS/2
Souris PS/2
x1
Souris PS/2
x1
x1
E/S du
Port série
x1
Port série
x1
panneau
Port VGA
x1
Port VGA
x1
arrière
Port LAN
x1
Port LAN
x1
Port USB
x4
Port USB
x4
Fiche audio
x3
Fiche audio
x3
Dimension
s de la
190 mm (l) X 244 mm (H)
190 mm (l) X 244 mm (H)
Prise en c harge RAID 0 / 1
Prise en c harge RAID 0 / 1
carte
Fonctionna
lités
spéciales
Windows 2K / XP / VISTA
Windows 2K / XP
Support
Biostar se réserve le droit d'ajo uter o u de
Biostar se réserve le droit d'ajo uter o u de
SE
supprimer le support de SE avec o u sa ns
supprimer le support de SE avec o u sa ns
préavis.
préavis.
29
Motherboard Manual
IT ALIAN
P4M900-M7 FE
P4M890-M7 FE
LGA 775
LGA 775
Processore Intel Core 2Duo/ Pentium 4 /
Processore Intel Core 2Duo/ Pentium 4 /
Pentium D / Celeron D / Celer on 4xx fi no a Pentium D / Celeron D / Celer on 4xx fi no a
3.8 GHz
CPU
3.8 GHz
*It is recommende d to use processors with *It is recommende d to use processors with
95W power co nsumption.
95W power co nsumption.
Supporto di Hyper -Threadi ng / Execute
Supporto di Hyper -Threadi ng / Execute
Disable Bit / Enha nced I ntel Spee dStep® / Disable Bit / Enha nced I ntel Spee dStep® /
Architettura Intel 64 / Tecnologi a Extende d Architettura Intel 64 / Tecnologi a Extende d
Memory 64
FSB
Memory 64
533 / 800 / 1066 MHz
533 / 800 / 1066 MHz
VIA P4M900
VIA P4M890
VIA VT8237A
VIA VT8237A
Chrome9 HC 3D / 2D Graphics
Chrome9 HC 3D / 2D Graphics
La memoria vi deo co ndivisa massima è di
La memoria vi deo co ndivisa massima è di
256MB
256MB
ITE 8712F
ITE 8712F
Fornisce le funzio nalità legacy Super I/O
Fornisce le funzio nalità legacy Super I/O
usate più comunemente.
usate più comunemente.
Interfaccia LPC (L ow Pin Count)
Interfaccia LPC (L ow Pin Count)
Funzioni di co ntrollo dell’ambiente:
Funzioni di co ntrollo dell’ambiente:
Monitoraggio hardware
Monitoraggio hardware
Controller velocità ventolina
Controller velocità ventolina
Funzione "Smart Guardi an" di I TE
Funzione "Smart Guardi an" di I TE
Alloggi DIMM DDR 2 x 2
Alloggi DIMM DDR 2 x 2
Supporto di DDR2 533 / 667
Supporto di DDR2 533 / 667
Ciascun DIMM supporta DDR 2 256MB /
Ciascun DIMM supporta DDR 2 256MB /
Memoria
512MB / 1GB / 2GB
512MB / 1GB / 2GB
principale
Capacità massima della memori a 4GB
Capacità massima della memori a 4GB
Chipset
Grafica
Super I/O
Modulo di memoria DDR2 a canale singolo Modulo di memoria DDR2 a canale singolo
IDE
SATA
30
DIMM registrati e DIMM ECC no n sono
DIMM registrati e DIMM ECC no n sono
supportati
supportati
Controller IDE i ntegrato
Controller IDE i ntegrato
Modalità Bus Master Ultra DMA 33 / 66 /
Modalità Bus Master Ultra DMA 33 / 66 /
100
100
/ 133
/ 133
Supporto modalità PIO Mode 0- 4
Supporto modalità PIO Mode 0- 4
Controller Serial ATA inte grato
Controller Serial ATA inte grato
Velocità di trasferimento dei dati fi no a 1.5 Velocità di trasferimento dei dati fi no a 1.5
Gb/s.
Gb/s.
Compatibile specifiche SATA Versione 1.0.
Compatibile specifiche SATA Versione 1.0.
P4M900-M7 FE/P4M890-M7 FE
P4M900-M7 FE
LAN PHY
Codec
audio
Alloggi
Connettori
su scheda
P4M890-M7 FE
Realtek RTL 8201CL PH Y
Realtek RTL 8201CL PH Y
Negoziazione automatica 10 / 100 Mb/s
Negoziazione automatica 10 / 100 Mb/s
Capacità Half / Full Duplex
Capacità Half / Full Duplex
ALC662
ALC662
Supporto audio High-Definition (HD)
Supporto audio High-Definition (HD)
Uscita audio 5.1 canali
Uscita audio 5.1 canali
Alloggio PCI
x2
Alloggio PCI
Alloggio PCI Ex press x16
x1
Alloggio PCI Ex press x16
x2
x1
Alloggio PCI Ex press x1
x1
Alloggio PCI Ex press x1
x1
Connettore flo ppy
x1
Connettore flo ppy
x1
Connettore Porta stampa nte
x1
Connettore Porta stampa nte
x1
Connettore IDE
x2
Connettore IDE
x2
Connettore SATA
x2
Connettore SATA
x2
Connettore pa nnello fro ntale
x1
Connettore pa nnello fro ntale
x1
Connettore audio frontale
x1
Connettore audio frontale
x1
Connettore CD-in
x1
Connettore CD-in
x1
Collettore ventolina CPU
x1
Collettore ventolina CPU
x1
Collettore ventolina sistema
x1
Collettore ventolina sistema
x1
Collettore cancellazione CMOS
x1
Collettore cancellazione CMOS
x1
Connettore USB
x2
Connettore USB
x2
Connettore alimentazione
x1
Connettore alimentazione
x1
(24 pin)
Connettore alimentazione
(24 pin)
x1
(4 pi n)
Connettore alimentazione
x1
(4 pi n)
Tastiera PS/2
x1
Tastiera PS/2
Mouse PS/2
x1
Mouse PS/2
x1
I/O
Porta seriale
x1
Porta seriale
x1
pannello
x1
Porta VGA
x1
Porta VGA
x1
posteriore Porta LAN
x1
Porta LAN
x1
Porta USB
x4
Porta USB
x4
Connettore audio
x3
Connettore audio
x3
Dimension
i scheda
190 mm (lar ghezza) x 244 mm (altezza)
190 mm (lar ghezza) x 244 mm (altezza)
Supporto RAID 0 / 1
Supporto RAID 0 / 1
Windows 2K / XP / VISTA
Windows 2K / XP
Biostar si riserva il diritto di aggiungere o
Biostar si riserva il diritto di aggiungere o
rimuovere il supporto di qualsiasi sistema
rimuovere il supporto di qualsiasi sistema
operativo se nza pre avviso.
operativo se nza pre avviso.
Caratterist
iche
speciali
Sistemi
operativi
supportati
31
Motherboard Manual
SPANISH
P4M900-M7 FE
P4M890-M7 FE
LGA 775
LGA 775
Procesador I ntel Core 2Duo / Penti um 4 /
Procesador I ntel Core 2Duo / Penti um 4 /
Pentium D / Celeron D / Celer on 4xx hasta Pentium D / Celeron D / Celer on 4xx hasta
3,8 GHz
3,8 GHz
*It is recommende d to use processors with *It is recommende d to use processors with
CPU
95W power co nsumption.
95W power co nsumption.
Admite Hyper -Threadi ng / Bit de
Admite Hyper -Threadi ng / Bit de
deshabilitación de ejecució n / Intel
deshabilitación de ejecució n / Intel
SpeedStep® Me jora do / Intel
SpeedStep® Me jora do / Intel
Architecture-64 / Tecnologí a Extended
Architecture-64 / Tecnologí a Extended
Memory 64
Memory 64
FSB
533 / 800 / 1066 MHz
533 / 800 / 1066 MHz
Conjunto
VIA P4M900
VIA P4M890
de chips
VIA VT8237A
VIA VT8237A
Chrome9 HC 3D / 2D Graphics
Chrome9 HC 3D / 2D Graphics
Memoria máxima de ví deo compartida de
Memoria máxima de ví deo compartida de
256MB
256MB
ITE 8712F
ITE 8712F
Gráficos
Le ofrece las funcionalidades here dadas de Le ofrece las funcionalidades here dadas de
Súper E/S
uso más común Súper E/S.
uso más común Súper E/S.
Interfaz de cue nta Low Pin
Interfaz de cue nta Low Pin
Iniciativas de control de entor no,
Iniciativas de control de entor no,
Monitor hardware
Monitor hardware
Controlador de velocida d de ve ntilador
Controlador de velocida d de ve ntilador
Función "Guardia intelige nte" de I TE
Función "Guardia intelige nte" de I TE
Ranuras DIMM DDR 2 x 2
Ranuras DIMM DDR 2 x 2
Admite DDR2 de 533 / 667
Admite DDR2 de 533 / 667
Cada DIMM admite DDR de 256MB / 512MB Cada DIMM admite DDR de 256MB / 512MB
Memoria
/1GB / 2GB
/1GB / 2GB
principal
Capacidad máxima de memoria de 4GB
Capacidad máxima de memoria de 4GB
Módulo de memoria DDR 2 de canal Se ncillo Módulo de memoria DDR 2 de canal Se ncillo
IDE
SATA
32
No a dmite DIMM re gistrados o DIMM
No a dmite DIMM re gistrados o DIMM
compatibles con ECC
compatibles con ECC
Controlador IDE inte grado
Controlador IDE inte grado
Modo bus maestro Ultra DMA 33 / 66 / 100 Modo bus maestro Ultra DMA 33 / 66 / 100
/ 133
/ 133
Soporte los Mo dos PIO 0~4,
Soporte los Mo dos PIO 0~4,
Controlador ATA Serie Integra do
Controlador ATA Serie Integra do
Tasas de transfere ncia de hasta 1.5 Gb/s.
Tasas de transfere ncia de hasta 1.5 Gb/s.
Compatible con la versión SATA 1.0.
Compatible con la versión SATA 1.0.
P4M900-M7 FE/P4M890-M7 FE
P4M900-M7 FE
Red Local
Códecs de
sonido
Ranuras
P4M890-M7 FE
Realtek RTL 8201CL PH Y
Realtek RTL 8201CL PH Y
Negociación de 10 / 100 Mb/s
Negociación de 10 / 100 Mb/s
Funciones Half / F ull dúplex
Funciones Half / F ull dúplex
ALC662
ALC662
Soporte de soni do de Alta Defi nición
Soporte de soni do de Alta Defi nición
Salida de sonido de 5.1 canales
Salida de sonido de 5.1 canales
Ranura PCI
X2
Ranura PCI
X2
Ranura PCI Ex press x16
X1
Ranura PCI Ex press x16
X1
Ranura PCI ex press x 1
X1
Ranura PCI ex press x 1
X1
Conector disco flexible
X1
Conector disco flexible
X1
Conector Puerto de impresora
X1
Conector Puerto de impresora
X1
Conector IDE
X2
Conector IDE
X2
Conector SATA
X2
Conector SATA
X2
Conector de pa nel fro ntal
X1
Conector de pa nel fro ntal
X1
Conector de sonido frontal
X1
Conector de sonido frontal
X1
Conector de entra da de C D
Conectore Cabecera de ve ntilador de C PU
X1
Conector de entra da de C D
X1
X1
Cabecera de ve ntilador de C PU
X1
s en placa Cabecera de ve ntilador de
Cabecera de ve ntilador de
sistema
X1
sistema
Cabecera de borrado de CMOS
X1
Cabecera de borrado de CMOS
X1
Conector USB
X2
Conector USB
X2
Conector de alimentación
X1
Conector de alimentación
X1
(24 patillas)
Conector de alimentación
X1
(24 patillas)
X1
(4 patillas)
Conector de alimentación
X1
(4 patillas)
Teclado PS/2
X1
Teclado PS/2
Ratón PS/2
X1
Ratón PS/2
X1
Puerto serie
X1
Puerto serie
X1
trasero de Puerto VGA
X1
Puerto VGA
X1
E/S
Puerto de re d local
X1
Puerto de re d local
X1
Puerto USB
X4
Puerto USB
X4
Conector de sonido
X3
Conector de sonido
X3
Panel
Tamaño de
la placa
Funciones
especiales
Soporte de
sistema
operativo
X1
190mm. (A) X 244 Mm. (H)
190mm. (A) X 244 Mm. (H)
Admite RAID 0 / 1
Admite RAID 0 / 1
Windows 2K / XP / VISTA
Windows 2K / XP
Biostar se reserva el derecho de a ñadir o
Biostar se reserva el derecho de a ñadir o
retirar el soporte de cualquier SO con o sin retirar el soporte de cualquier SO con o sin
aviso previo.
aviso previo.
33
Motherboard Manual
PORT UGUESE
P4M900-M7 FE
P4M890-M7 FE
LGA 775
LGA 775
Processador Intel Core2Duo / Pe ntium 4 /
Processador Intel Core2Duo / Pe ntium 4 /
Pentium D / Celero n D / Celer on 4xx até 3,8 Pentium D / Celero n D / Celer on 4xx até 3,8
GHz
CPU
FSB
Chipset
Placa
gráfica
GHz
*It is recommende d to use processors with *It is recommende d to use processors with
95W power co nsumption.
95W power co nsumption.
Suporta as tecnologias Hyper -Threa ding /
Suporta as tecnologias Hyper -Threa ding /
Execute Disable Bit / Enha nced I ntel
Execute Disable Bit / Enha nced I ntel
SpeedStep® / Intel Arquitecture -64 /
SpeedStep® / Intel Arquitecture -64 /
Extende d Memor y 64
Extende d Memor y 64
533 / 800 / 1066 MHz
533 / 800 / 1066 MHz
VIA P4M900
VIA P4M890
VIA VT8237A
VIA VT8237A
Chrome9 HC 3D / 2D Graphics
Chrome9 HC 3D / 2D Graphics
Memória de víde o máxima partilha da: 256 Memória de víde o máxima partilha da: 256
MB
MB
ITE 8712F
ITE 8712F
Proporciona as funcionalida des mais
Proporciona as funcionalida des mais
utilizadas em termos da especificação
utilizadas em termos da especificação
Especificaç Super I/O.
Super I/O.
ão Super
Interface LPC (Low Pi n Co unt).
Interface LPC (Low Pi n Co unt).
I/O
Iniciativas para control o do am biente
Iniciativas para control o do am biente
Monitorização do hardware
Monitorização do hardware
Controlador da velocida de da v entoinha
Controlador da velocida de da v entoinha
Função "Smart Guardia n" da I TE
Função "Smart Guardia n" da I TE
Ranhuras DIMM DDR2 x 2
Ranhuras DIMM DDR2 x 2
Suporta mó dulos DDR2 533 / 667
Suporta mó dulos DDR2 533 / 667
Cada mó dulo DIMM suporta uma memória Cada mó dulo DIMM suporta uma memória
Memória
DDR2 de 256MB / 512 MB / 1 GB / 2GB
DDR2 de 256MB / 512 MB / 1 GB / 2GB
principal
Capacidade máxima de memória : 4 GB
Capacidade máxima de memória : 4 GB
Módulo de memória DDR2 de canal simples Módulo de memória DDR2 de canal simples
IDE
SATA
Os módulos DIMM r egistados e os DIMM
Os módulos DIMM r egistados e os DIMM
ECC nã o são suporta dos
ECC nã o são suporta dos
Controlador IDE inte grado
Controlador IDE inte grado
Modo Bus master Ultra DMA 33 / 66 / 100 / Modo Bus master Ultra DMA 33 / 66 / 100 /
133
133
Suporta o modo PIO 0~4,
Suporta o modo PIO 0~4,
Controlador Serial ATA integra do
Controlador Serial ATA integra do
Velocidades de transmissão de dados até
Velocidades de transmissão de dados até
1.5 Gb/s.
1.5 Gb/s.
Compatibilidade com a especificação SATA Compatibilidade com a especificação SATA
versão 1.0.
34
versão 1.0.
P4M900-M7 FE/P4M890-M7 FE
P4M900-M7 FE
P4M890-M7 FE
Realtek RTL 8201CL PH Y
Realtek RTL 8201CL PH Y
Auto ne gociação de 10 / 100 MB/s
Auto ne gociação de 10 / 100 MB/s
Capacidade semi/full- duplex
Capacidade semi/full- duplex
ALC662
ALC662
Codec de
Suporta a especificação High-De finition
Suporta a especificação High-De finition
som
Audio
Audio
LAN PHY
Saída de á udio de 5.1 ca nais
Ranhuras
Saída de á udio de 5.1 ca nais
Ranhura PCI
x2
Ranhura PCI
x2
Ranhura PCI Express x 16
x1
Ranhura PCI Express x 16
x1
Ranhura PCI Express x 1
x1
Ranhura PCI Express x 1
x1
Conector da unida de de disquetes x 1
Conector da unida de de disquetes x 1
Conector da para impressora
x1
Conector da para impressora
x1
Conector IDE
x2
Conector IDE
x2
Conector SATA
x2
Conector SATA
x2
Conector do pai nel fro ntal
x1
Conector do pai nel fro ntal
x1
Conector de áudio fro ntal
x1
Conector de áudio fro ntal
x1
Conector para e ntrada de C Ds
x1
Conector para e ntrada de C Ds
x1
Conectore Conector da ve ntoinha da CPU
x1
Conector da ve ntoinha da CPU
x1
s na placa Conector da ve ntoinha do
sistema
Conector da ve ntoinha do
x1
Conector para limpeza do CMOS x1
x2
Conector USB
x2
Conector de alimentação
x1
Conector de alimentação
x1
x1
Conector de alimentação
(24 pinos)
(24 pinos)
(4 pi nos)
Saídas no
painel
traseiro
Tamanho
da pl aca
x1
Conector para limpeza do CMOS x1
Conector USB
Conector de alimentação
Entradas/
sistema
x1
(4 pi nos)
Teclado PS/2
x1
Teclado PS/2
x1
Rato PS/2
x1
Rato PS/2
x1
Porta série
x1
Porta série
x1
Porta VGA
x1
Porta VGA
x1
Porta LAN
x1
Porta LAN
x1
Porta USB
x4
Porta USB
x4
Tomada de áudio
x3
Tomada de áudio
x3
190 mm (L) X 244 mm (A)
190 mm (L) X 244 mm (A)
Característ
icas
Suporta as funções RAID 0 / 1
Suporta as funções RAID 0 / 1
Windows 2K / XP / VISTA
Windows 2K / XP
especiais
Sistemas
operativos A Biostar reserva-se o direito de adicionar
A Biostar reserva-se o direito de adicionar
suportado ou remov er suporte para qualquer sistema ou remov er suporte para qualquer sistema
s
operativo com ou sem aviso prévio.
operativo com ou sem aviso prévio.
35
Motherboard Manual
POLISH
P4M900-M7 FE
P4M890-M7 FE
LGA 775
LGA 775
Procesor Intel Cor e2Duo/ Penti um 4 /
Procesor Intel Cor e2Duo/ Penti um 4 /
Pentium D / Celero n D / Celero n 4xx do 3,8 Pentium D / Celero n D / Celero n 4xx do 3,8
GHz
Procesor
GHz
*It is recommende d to use processors with *It is recommende d to use processors with
95W power co nsumption.
95W power co nsumption.
Obsługa Hyper-Threa ding / Exec ute Disable Obsługa Hyper-Threa ding / Exec ute Disable
FSB
Chipset
Grafika
Pamięć
główna
Super I/O
IDE
SATA
36
Bit / Enhance d I ntel Spee dStep® / Intel
Bit / Enhance d I ntel Spee dStep® / Intel
Architecture-64 / Exte nde d Memory 64
Architecture-64 / Exte nde d Memory 64
Technol ogy
Technol ogy
533 / 800 / 1066 MHz
533 / 800 / 1066 MHz
VIA P4M900
VIA P4M890
VIA VT8237A
VIA VT8237A
Chrome9 HC 3D / 2D Graphics
Chrome9 HC 3D / 2D Graphics
Maks. wielkość współdzielonej pamięci
Maks. wielkość współdzielonej pamięci
video wy nosi 256MB
video wy nosi 256MB
Gniazda DDR 2 DIMM x 2
Gniazda DDR 2 DIMM x 2
Obsługa DDR2 533 / 667
Obsługa DDR2 533 / 667
Każde gniazdo DIMM obsługuje mo duły
Każde gniazdo DIMM obsługuje mo duły
256MB /512MB / 1GB / 2GB DDR2
256MB /512MB / 1GB / 2GB DDR2
Maks. wielkość pamięci 4GB
Maks. wielkość pamięci 4GB
Moduł pamięci DDR2 z trybem
Moduł pamięci DDR2 z trybem
poje dynczego kanału
poje dynczego kanału
Brak obsługi Registered DIMM or az ECC
Brak obsługi Registered DIMM or az ECC
DIMM
DIMM
ITE 8712F
ITE 8712F
Zapewnia najbardziej powszechne funkcje
Zapewnia najbardziej powszechne funkcje
Super I/O.
Super I/O.
Interfejs L ow Pin Count
Interfejs L ow Pin Count
Funkcje kontroli warunków prac y,
Funkcje kontroli warunków prac y,
Monitor H/W
Monitor H/W
Kontroler prę dkości wentylatora
Kontroler prę dkości wentylatora
Funkcja ITE "Smart Guar dian"
Funkcja ITE "Smart Guar dian"
Zintegrowany kontroler IDE
Zintegrowany kontroler IDE
Ultra DMA 33 / 66 / 100 / 133 Tryb Bus
Ultra DMA 33 / 66 / 100 / 133 Tryb Bus
Master
Master
obsługa PIO tryb 0~4,
obsługa PIO tryb 0~4,
Zintegrowany kontroler Serial ATA
Zintegrowany kontroler Serial ATA
Transfer da nych do 1.5 Gb/s.
Transfer da nych do 1.5 Gb/s.
Zgodność ze specyfikacją SATA w wersji
Zgodność ze specyfikacją SATA w wersji
1.0.
1.0.
P4M900-M7 FE/P4M890-M7 FE
P4M900-M7 FE
P4M890-M7 FE
Realtek RTL 8201CL PH Y
LAN PHY
Kodek
dźwiękowy
Gniazda
Złącza
wbudowan
e
Realtek RTL 8201CL PH Y
10 / 100 Mb/s z automatyczną negocjacją
10 / 100 Mb/s z automatyczną negocjacją
szybkości
szybkości
Działanie w trybie połowicznego / pełnego
Działanie w trybie połowicznego / pełnego
dupleksu
dupleksu
ALC662
ALC662
Obsługa Hi gh- Definitio n Audio
Obsługa Hi gh- Definitio n Audio
5.1 ka nałowe wy jście audio
5.1 ka nałowe wy jście audio
Gniazdo PCI
x2
Gniazdo PCI
x2
Gniazdo PCI Express x 16
x1
Gniazdo PCI Express x 16
x1
Gniazdo PCI Express x 1
x1
Gniazdo PCI Express x 1
x1
Złącze napędu dyskietek
x1
Złącze napędu dyskietek
x1
Złącze Port druk arki
x1
Złącze Port druk arki
x1
Złącze IDE
x2
Złącze IDE
x2
Złącze SATA
x2
Złącze SATA
x2
Złącze panela przedniego
x1
Złącze panela przedniego
x1
Przednie złącze a udio
x1
Przednie złącze a udio
x1
Złącze wejścia CD
x1
Złącze wejścia CD
x1
Złącze główkowe wentylatora
procesora
Złącze główkowe wentylatora
x1
Złącze główkowe wentylatora
systemowego
I/O
Wymiary
x1
Złącze główkowe wentylatora
x1
Złącze główkowe kasowani a
Back Panel
procesora
systemowego
x1
Złącze główkowe kasowani a
CMOS
x1
CMOS
Złącze USB
x2
Złącze USB
x1
x2
Złącze zasilania (24 pi nowe)
x1
Złącze zasilania (24 pi nowe)
x1
Złącze zasilania (4 pinowe)
x1
Złącze zasilania (4 pinowe)
x1
Klawiatura PS/2
x1
Klawiatura PS/2
x1
Mysz PS/2
x1
Mysz PS/2
x1
Port szeregowy
x1
Port szeregowy
x1
Port VGA
x1
Port VGA
x1
Port LAN
x1
Port LAN
x1
Port USB
x4
Port USB
x4
Gniazdo audio
x3
Gniazdo audio
x3
190 mm (S) X 244 mm (W)
190 mm (S) X 244 mm (W)
Obsługa RAID 0 / 1
Obsługa RAID 0 / 1
Obsluga
Windows 2K / XP / VISTA
Windows 2K / XP
systemu
Biostar zastrzega sobie prawo do dawania
Biostar zastrzega sobie prawo do dawania
operacyjn
lub o dwoływania obsługi dowolne go
lub o dwoływania obsługi dowolne go
ego
systemu operacyjnego bez powiadomienia. systemu operacyjnego bez powiadomienia.
płyty
Funkcje
specjalne
37
Motherboard Manual
RUSSIAN
P4M900-M7 FE
P4M890-M7 FE
LGA 775
Процессор Intel Core 2Duo/ Pe ntium 4 /
Pentium D / Celeron D / Celer on 4xx до
3.8 ГГц
LGA 775
Процессор Intel Core 2Duo/ Pe ntium 4 /
Pentium D / Celeron D / Celer on 4xx до
3.8 ГГц
/ Execute Disable Bit / Enhance d Intel
SpeedStep® / Intel Architecture-64 /
Extende d Memor y 64 Technology
/ Execute Disable Bit / Enhance d Intel
SpeedStep® / Intel Architecture-64 /
Extende d Memor y 64 Technology
CPU
(центра льны *It is recommende d to use processors
*It is recommende d to use processors
й
with 95W power consumption.
with 95W power consumption.
процессор) Подде ржка техноло гий Hy per-Thre ading Подде ржка техноло гий Hy per-Thre ading
FSB
533 / 800 / 1066 МГц
533 / 800 / 1066 МГц
Набор
микросхем
VIA P4M900
VIA VT8237A
VIA P4M890
VIA VT8237A
Графика
Chrome9 HC 3D / 2D Graphics
Chrome9 HC 3D / 2D Graphics
Максимальная совмес тно используемая Максимальная совмес тно используемая
Основная
память
Super I/O
IDE
SATA
38
видео память составляет 256 МБ
Слоты DDR2 DIMM x 2
видео память составляет 256 МБ
Слоты DDR2 DIMM x 2
Подде ржка DDR2 533 / 667
Каждый модуль DIMM по ддерж ивае т
256MB / 512МБ / 1ГБ / 2ГБ DDR2
Подде ржка DDR2 533 / 667
Каждый модуль DIMM по ддерж ивае т
256MB / 512МБ / 1ГБ / 2ГБ DDR2
Максимальная ёмк ость памя ти 4 ГБ
Модуль памя ти с однока наль ным
режимом DDR2
Не подде рживае т за рег истриров анные
Максимальная ёмк ость памя ти 4 ГБ
Модуль памя ти с однока наль ным
режимом DDR2
Не подде рживае т за рег истриров анные
модули DIMM and ECC DIMM
модули DIMM and ECC DIMM
ITE 8712F
Обеспечива ет на ибо лее испо льзуемые
действ ующие функциона льные
возможности Super I/O.
ITE 8712F
Обеспечива ет на ибо лее испо льзуемые
действ ующие функциона льные
возможности Super I/O.
Инте рфейс с низким к оличеством
выводов
Инициа тивы по охране ок ружающей
Инте рфейс с низким к оличеством
выводов
Инициа тивы по охране ок ружающей
среды,
Аппара тный монитор
Регуля тор скорости
среды,
Аппара тный монитор
Регуля тор скорости
Функция ITE "Smart Guardian"
(Интелле ктуа льна я защ ита)
Функция ITE "Smart Guardian"
(Интелле ктуа льна я защ ита)
Встроенное устройств о у прав ления
Встроенное устройств о у прав ления
встрое нными интерфе йсами устройств встрое нными интерфе йсами устройств
Режим "хозяина" ш ины Ultra DMA 33 / 66 Режим "хозяина" ш ины Ultra DMA 33 / 66
/ 100 / 133
Подде ржка режима PIO 0~4,
/ 100 / 133
Подде ржка режима PIO 0~4,
Встроенное последов ате льное
устройс тво управле ния ATA
скорость передач и данных до 1.5
Встроенное последов ате льное
устройс тво управле ния ATA
скорость передач и данных до 1.5
гига бит/с.
Соотве тств ие спецификации SATA
версия 1.0.
гига бит/с.
Соотве тств ие спецификации SATA
версия 1.0.
P4M900-M7 FE/P4M890-M7 FE
Локаль ная
сеть
Звуково й
кодек
Слоты
P4M900-M7 FE
Realtek RTL 8201CL PH Y
Автоматическое сог ласова ние 10 / 100
Мб/с
Частич ная / полная дуплексна я
способнос ть
P4M890-M7 FE
Realtek RTL 8201CL PH Y
Автоматическое сог ласова ние 10 / 100
Мб/с
Частич ная / полная дуплексна я
способнос ть
ALC662
Звукова я поддержка High-De finition
5.1кана льный звуков ой выход
Слот PCI
x2
Слот PCI Ex press x16
x1
Слот PCI Ex press x 1
x1
ALC662
Звукова я поддержка High-De finition
5.1кана льный звуков ой выход
Слот PCI
x2
Слот PCI Ex press x16
x1
Слот PCI Ex press x 1
x1
Разъём НГМД
x1
Разъём Порт подключе ния
принте ра
x1
Разъём IDE
x2
Разъём SATA
x2
Разъём на лицево й пане ли
x1
Входно й звук овой раз ъём
x1
Разъём вв ода для CD
x1
Встроенный Контак тирующее
разъём
прис пособление ве нтиля тора
центра льно го процессора
x1
Контак тирующее приспосо бле ние
вентиля тора системы
x1
Открытое контак тирующее
прис пособление CMOS
x1
USB-разъём
x2
Разъем питания ( 24 вывод)
x1
Разъем питания ( 4 вывод)
x1
Задняя
пане ль
средств
ввода-выво д
а
Клавиа тура PS/ 2
Мышь PS/2
Последо вате льный по рт
Порт VGA
Порт LAN
USB-порт
Гнездо для по дключ ения
наушников
x1
x1
x1
x1
x1
x4
x3
Размер
190 мм (Ш ) X 244 мм (В)
пане ли
Специаль ны
е
технические Подде ржка RAID 0 / 1
харак терист
ики
Подде ржка
OS
Windows 2K / XP / VISTA
Biostar сохраня ет за собо й прав о
добав лять или уда лять средс тва
обеспече ния для OS с или без
предварите льно го у ведом ления.
Разъём НГМД
x1
Разъём Порт подключе ния
принте ра
x1
Разъём IDE
x2
Разъём SATA
x2
Разъём на лицево й пане ли
x1
Входно й звук овой раз ъём
x1
Разъём вв ода для CD
x1
Контак тирующее
прис пособление ве нтиля тора
центра льно го процессора
x1
Контак тирующее приспосо бле ние
вентиля тора системы
x1
Открытое контак тирующее
прис пособление CMOS
x1
USB-разъём
x2
Разъем питания ( 24 вывод)
x1
Разъем питания ( 4 вывод)
x1
Клавиа тура PS/ 2
Мышь PS/2
Последо вате льный по рт
Порт VGA
Порт LAN
USB-порт
Гнездо для по дключ ения
наушников
x1
x1
x1
x1
x1
x4
x3
190 мм (Ш ) X 244 мм (В)
Подде ржка RAID 0 / 1
Windows 2K / XP
Biostar сохраня ет за собо й прав о
добав лять или уда лять средс тва
обеспече ния для OS с или без
предварите льно го у ведом ления.
39
‫‪Motherboard Manual‬‬
‫‪ARABIC‬‬
‫‪P4M900-M7 FE‬‬
‫‪LGA 775‬‬
‫‪P4M890-M7 FE‬‬
‫‪LGA 775‬‬
‫‪Intel Core2Duo/ Pe ntium 4 / Pentium‬ﻡﻌﺎﻟﺠﺎت ‪Intel Core2Duo/ Pe ntium 4 / Pentium‬ﻡﻌﺎﻟﺠﺎت‬
‫ﺑ ﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪ D / C eleron D / Celer on 4xx 8.3‬ﺑ ﺘﺮدد ﻳﺼﻞ إﻟﻰ ‪D / C eleron D / Celer on 4xx 8.3‬‬
‫وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ‬
‫اﻟﻤﺮآﺰﻳ ﺔ‬
‫ﺝﻴﺠﺎ هﺮﺕﺰ‬
‫ﺝﻴﺠﺎ هﺮﺕﺰ‬
‫‪*It is recommended to use processors with *It is recommended to use processors with‬‬
‫‪95W power co nsumption.‬‬
‫‪95W power co nsumption.‬‬
‫‪Hyper -Thre ading / Exec ute Disabl e‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت ‪Hyper -Thre ading / Exec ute Disabl e‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺎت‬
‫اﻟﻨﺎﻗﻞ اﻷﻡﺎﻡﻲ‬
‫اﻟﺠﺎﻥﺒﻲ‬
‫ﻡﺠﻤﻮﻋﺔ اﻟﺸﺮاﺋﺢ‬
‫ﺑﻄﺎﻗﺔ اﻟﺮﺳﻮﻡﺎت‬
‫‪Bit / Enhance d I ntel Spee dStep® /‬‬
‫‪Bit / Enhance d I ntel Spee dStep® /‬‬
‫‪Extende d Memor y 64 Technology‬‬
‫‪Extende d Memor y 64 Technology‬‬
‫ﻡﻴﺠﺎ هﺮﺕﺰ ‪ 533 / 800 / 1066‬ﺕﺮدد‬
‫‪VIA P4M900‬‬
‫‪VIA P4M890‬‬
‫‪VIA VT8237A‬‬
‫‪VIA VT8237A‬‬
‫‪Chrome9 HC 3D / 2D Graphics‬‬
‫‪Chrome9 HC 3D / 2D Graphics‬‬
‫ﻡﻴﺠﺎ ﺑﺎﻳﺖ‪256‬أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪﻳﻮ اﻟﻤﺸﺘﺮآﺔ‬
‫ﻡﻴﺠﺎ ﺑﺎﻳﺖ‪256‬أﻗﺼﻰ ﺳﻌﺔ ﻟﺬاآﺮة اﻟﻔﻴﺪﻳﻮ اﻟﻤﺸﺘﺮآﺔ‬
‫ﻓﺘﺤﺔ‪DDR2 DIMM‬‬
‫ﻋﺪد‪2‬‬
‫ﻡﻴﺠﺎ ﺑﺎﻳﺖ ‪ 533 / 667‬ﺳﻌﺎت ‪ DDR2‬ﺕﺪﻋﻢ اﻟﺬاآﺮ ة ﻡﻦ ﻥﻮع‬
‫اﻟﺬاآﺮة اﻟﺮﺋﻴﺴﻴﺔ‬
‫ﺳﻌﺔ ‪ DDR2‬ﺕﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع ‪ DIMM‬ﺕﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫ﺳﻌﺔ ‪ DDR2‬ﺕﺪﻋﻢ ذاآﺮة ﻡﻦ ﻥﻮع ‪ DIMM‬ﺕﺪﻋﻢ آﻞ ﻓﺘﺤﺔ‬
‫ﻡﻴﺠﺎ ﺑﺎﻳﺖ و‪ 1‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ ‪ 2 /‬ﺝﻴﺠﺎ ‪ /512‬ﻡﻴﺠﺎ ﺑﺎﻳﺖ‪256‬‬
‫ﺑﺎﻳﺖ‬
‫ﺑﺎﻳﺖ‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 4‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ‬
‫ﺳﻌﺔ ذاآﺮة ﻗﺼﻮى ‪ 4‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ‬
‫أﺣﺎدﻳﺔ اﻟﻘﻨﺎة ‪DDR2‬وﺣﺪة ذا آﺮة‬
‫أﺣﺎدﻳﺔ اﻟﻘﻨﺎة ‪DDR2‬وﺣﺪة ذا آﺮة‬
‫‪ ECC‬وﺕﻠﻚ اﻟﺘﻲ ﻻ ﺕﺘﻮاﻓﻖ ﻡﻊ ‪DIMM‬ﻻ ﺕﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫‪ ECC‬وﺕﻠﻚ اﻟﺘﻲ ﻻ ﺕﺘﻮاﻓﻖ ﻡﻊ ‪DIMM‬ﻻ ﺕﺪﻋﻢ رﻗﺎﺋﻖ اﻟﺬاآﺮة‬
‫‪ITE 8712F‬‬
‫‪ITE 8712F‬‬
‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻡ ًﺎ ‪ Super I /O .‬ﺕﻮﻓﺮ وﻇﻴﻔ ﺔ‬
‫اﻷآﺜﺮ اﺳﺘﺨﺪاﻡ ًﺎ ‪ Super I /O .‬ﺕﻮﻓﺮ وﻇﻴﻔﺔ‬
‫‪ Low Pi n Count‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ‬
‫‪SATA‬‬
‫‪Interface‬‬
‫‪ Low Pi n Count‬ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ‬
‫وﺳﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬
‫وﺳ ﺎﺋﻞ اﻟﺘﺤﻜﻢ ﻓﻲ اﻟﺒﻴﺌﺔ‪:‬‬
‫ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬
‫ﻡﺮاﻗﺐ ﻟﻤﻌﺮﻓﺔ ﺣﺎﻟﺔ اﻷﺝﻬﺰة‬
‫ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣ ﺔ‬
‫ﻡﺮاﻗﺐ ﻓﻲ ﺳﺮﻋﺔ اﻟﻤﺮوﺣ ﺔ‬
‫‪ ITE‬ﻡﻦ "‪"Smart Guar dian‬وﻇﻴﻔﺔ‬
‫‪ ITE‬ﻡﻦ "‪"Smart Guar dian‬وﻇﻴﻔﺔ‬
‫ﻡﺘﻜﺎﻡﻞ ‪ IDE‬ﻡﺘﺤﻜﻢ‬
‫ﻡﻨﻔﺬ ‪IDE‬‬
‫ﻓﺘﺤﺔ‪DDR2 DIMM‬‬
‫ﻋﺪد‪2‬‬
‫ﻡﻴﺠﺎ ﺑﺎﻳﺖ ‪ 533 / 667‬ﺳﻌﺎت ‪ DDR2‬ﺕﺪﻋﻢ اﻟﺬاآﺮ ة ﻡﻦ ﻥﻮع‬
‫ﻡﻴﺠﺎ ﺑﺎﻳﺖ و‪ 1‬ﺝﻴﺠﺎ ﺑﺎﻳﺖ ‪ 2 /‬ﺝﻴﺠﺎ ‪ /512‬ﻡﻴﺠﺎ ﺑﺎﻳﺖ‪256‬‬
‫‪Interface‬‬
‫‪Super I/O‬‬
‫ﻡﻴﺠﺎ هﺮﺕﺰ ‪ 533 / 800 / 1066‬ﺕﺮدد‬
‫ﻡﺘﻜﺎﻡﻞ ‪ IDE‬ﻡﺘﺤﻜﻢ‬
‫‪Ultra DMA 33 / 66 / 100 / 133‬ﻥﺎﻗﻞ ﺑﺘﻘﻨﻴﺔ‬
‫‪Ultra DMA 33 / 66 / 100 / 133‬ﻥﺎﻗﻞ ﺑﺘﻘﻨﻴﺔ‬
‫وﺿﻊ رﺋﻴﺴﻲ‬
‫وﺿﻊ رﺋﻴﺴﻲ‬
‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬
‫‪PIO Mode 0~4‬دﻋﻢ وﺿﻊ‬
‫ﻡﺘﻜﺎﻡﻞ‪ Serial ATA‬ﻡﺘﺤﻜﻢ‬
‫ﻡﺘﻜﺎﻡﻞ‪ Serial ATA‬ﻡﺘﺤﻜﻢ‬
‫ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺕﺼﻞ إﻟﻰ‪ 1.5‬ﺝﻴﺠﺎﺑﺖ‪ /‬ﺙﺎﻥﻴﺔ‪.‬‬
‫ﻥﻘﻞ اﻟﺒﻴﺎﻥﺎت ﺑﺴﺮﻋﺎت ﺕﺼﻞ إﻟﻰ‪ 1.5‬ﺝﻴﺠﺎﺑﺖ‪ /‬ﺙﺎﻥﻴﺔ‪.‬‬
‫‪ 1.0.‬اﻹﺹﺪار ‪ SATA‬ﻡﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫‪ 1.0.‬اﻹﺹﺪار ‪ SATA‬ﻡﻄﺎﺑﻘﺔ ﻟﻤﻮاﺹﻔﺎت‬
‫‪40‬‬
‫‪P4M900-M7 FE/P4M890-M7 FE‬‬
‫‪P4M900-M7 FE‬‬
‫ﺵﺒﻜﺔ دا ﺥﻠﻴﺔ‬
‫آﻮدﻳﻚ اﻟﺼﻮ ت‬
‫اﻟﻔﺘﺤﺎت‬
‫اﻟﻤﻨﺎﻓﺬ ﻋﻠﻰ ﺳﻄﺢ‬
‫اﻟﻠﻮﺣ ﺔ‬
‫ﻡﻨﺎﻓﺬ دﺥﻞ‪ /‬ﺥﺮج‬
‫اﻟﻠﻮﺣﺔ اﻟﺨﻠﻔﻴﺔ‬
‫‪P4M890-M7 FE‬‬
‫‪Realtek RTL 8201CL PH Y‬‬
‫‪Realtek RTL 8201CL PH Y‬‬
‫ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ ‪ 100 /10‬ﻡﻴﺠﺎ ﺑﺎﻳﺖ ‪ /‬ﺙﺎﻥﻴﺔ‬
‫ﺕﻔﺎوض ﺕﻠﻘﺎﺋﻲ ‪ 100 /10‬ﻡﻴﺠﺎ ﺑﺎﻳﺖ ‪ /‬ﺙﺎﻥﻴﺔ‬
‫إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫إﻡﻜﺎﻥﻴﺔ اﻟﻨﻘﻞ اﻟﻤﺰدوج اﻟﻜﺎﻡﻞ‪/‬اﻟﻨﺼﻔﻲ‬
‫‪ALC662‬‬
‫‪ALC662‬‬
‫ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ‬
‫ﺕﺪﻋﻢ ﺕﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮﻳﻒ ﻡﻦ‬
‫‪5.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮ ت‬
‫‪5.1‬ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮ ت‬
‫ﻓﺘﺤﺔ ‪PCI‬‬
‫ﻋﺪد ‪2‬‬
‫ﻓﺘﺤﺔ ‪PCI‬‬
‫ﻋﺪد ‪2‬‬
‫ﻓﺘﺤﺔ ‪PCI Expressx16‬‬
‫ﻋﺪد ‪1‬‬
‫ﻓﺘﺤﺔ ‪PCI Expressx16‬‬
‫ﻋﺪد ‪1‬‬
‫ﻓﺘﺤﺔ‪PCI Express x 1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻓﺘﺤﺔ‪PCI Express x 1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔ ﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ‬
‫ﻡﻨﻔﺬ ﻃﺎﺑﻌﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﻡﺤﺮك أﻗﺮاص ﻡﺮﻥﺔ‬
‫ﻡﻨﻔﺬ ﻃﺎﺑﻌﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ‪IDE‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻨﻔﺬ‪IDE‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻨﻔﺬ‪SATA‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻨﻔﺬ‪SATA‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ اﻟﻠﻮﺣﺔ اﻷﻡﺎﻡﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ اﻟﺼﻮت اﻷﻡﺎﻡﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ‪CD-IN‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ‪CD-IN‬‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ وﺣﺪة اﻟﻤﻌﺎﻟﺠﺔ اﻟﻤﺮآﺰﻳﺔ‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺮوﺣﺔ اﻟﻨﻈﺎم‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺴﺢ‪CMOS‬‬
‫ﻋﺪد ‪1‬‬
‫وﺹﻠﺔ ﻡﺴﺢ‪CMOS‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ‪USB‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻨﻔﺬ‪USB‬‬
‫ﻋﺪد ‪2‬‬
‫ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس(‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪24‬دﺑﻮس(‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪ 4‬دﺑﺎﺑﻴﺲ(‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺕﻮﺹﻴﻞ اﻟﻄﺎﻗﺔ )‪ 4‬دﺑﺎﺑﻴﺲ(‬
‫ﻋﺪد ‪1‬‬
‫ﻟﻮﺣﺔ ﻡﻔﺎﺕﻴﺢ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻟﻮﺣﺔ ﻡﻔﺎﺕﻴﺢ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﺎوس ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﺎوس ‪PS/2‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺕﺴﻠﺴﻠﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺕﺴﻠﺴﻠﻲ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ‪VGA‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ‪VGA‬‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺕﺼﺎل ﻡﺤ ﻠﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﻔﺬ ﺵﺒﻜﺔ اﺕﺼﺎل ﻡﺤﻠﻴﺔ‬
‫ﻋﺪد ‪1‬‬
‫ﻡﻨﺎﻓﺬ ‪USB‬‬
‫ﻋﺪد ‪4‬‬
‫ﻡﻨﺎﻓﺬ ‪USB‬‬
‫ﻋﺪد ‪4‬‬
‫ﻡﻘﺒﺲ ﺹﻮت‬
‫ﻋﺪد‪3‬‬
‫ﻡﻘﺒﺲ ﺹﻮت‬
‫ﻋﺪد‪3‬‬
‫ﺣﺠﻢ اﻟﻠﻮﺣﺔ‬
‫‪ 190‬ﻡﻢ )ﻋﺮض (‪ 244 X‬ﻡﻢ ) ارﺕﻔﺎع(‬
‫‪ 190‬ﻡﻢ )ﻋﺮض (‪ 244 X‬ﻡﻢ ) ارﺕﻔﺎع(‬
‫ﻣﺰاﻳﺎ ﺧﺎﺻﺔ‬
‫‪ RAID 0 / 1‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫‪ RAID 0 / 1‬ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ‬
‫دﻋﻢ أﻥﻈﻤﺔ‬
‫اﻟﺘﺸﻐﻴﻞ‬
‫‪41‬‬
‫‪Windows 2K / XP / VISTA‬‬
‫‪Windows 2K / XP‬‬
‫ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ‪ Biostar‬ﺕﺤﺘﻔﻆ‬
‫ﺑﺤﻘﻬﺎ ﻓﻲ إﺿﺎﻓﺔ أو إزاﻟﺔ اﻟﺪﻋﻢ ﻷي ﻥﻈﺎم ‪ Biostar‬ﺕﺤﺘﻔﻆ‬
‫ﺕﺸﻐﻴﻞ ﺑﺈﺥﻄﺎر أو ﺑﺪون إﺥﻄﺎر ‪.‬‬
‫ﺕﺸﻐﻴﻞ ﺑﺈﺥﻄﺎر أو ﺑﺪون إﺥﻄﺎر ‪.‬‬
Motherboard Manual
JAPANESE
P4M900-M7 FE
P4M890-M7 FE
LGA 775
LGA 775
Intel Core2Duo/ Pe ntium 4 / Pentium D /
Intel Core2Duo/ Pe ntium 4 / Pentium D /
Celeron D / Cel eron 4xx pr ocessor up to 3.8 Celeron D / Cel eron 4xx pr ocessor up to 3.8
GHz
CPU
FSB
95W power co nsumption.
95W power co nsumption.
Hyper -Thre ading / Exec ute Disabl e Bit /
Hyper -Thre ading / Exec ute Disabl e Bit /
Enha nced Intel SpeedStep® / I ntel
Enha nced Intel SpeedStep® / I ntel
Architecture-64 / Exte nde d Memory 64
Architecture-64 / Exte nde d Memory 64
Technol ogy をサポートします
Technol ogy をサポートします
533 / 800 / 1066 MHz
533 / 800 / 1066 MHz
チップセッ VIA P4M900
ト
GHz
*It is recommende d to use processors with *It is recommende d to use processors with
VIA VT8237A
VIA P4M890
VIA VT8237A
グラフィッ Chrome9 HC 3D / 2D Graphics
Chrome9 HC 3D / 2D Graphics
クス
最大の共有ビデオメモリは256MBです
最大の共有ビデオメモリは256MBです
DDR2 DIMMスロット x 2
DDR2 DIMMスロット x 2
DDR2 533 / 667をサポート
DDR2 533 / 667をサポート
各DIMMは 256/ 512MB/1GB/ 2GB DDR2をサ 各DIMMは 256/ 512MB/1GB/ 2GB DDR2をサ
メインメモ
リ
Super I/O
IDE
SATA
42
ポート
ポート
最大メモリ容量4GB
最大メモリ容量4GB
シングル チャンネルモードDDR 2メモリモジュ シングル チャンネルモードDDR 2メモリモジュ
ール
ール
登録済みDIMMとECC DIMMはサポートされま
登録済みDIMMとECC DIMMはサポートされま
せん
せん
ITE 8712F
ITE 8712F
もっとも一般に使用されるレガシーSuper I/O
もっとも一般に使用されるレガシーSuper I/O
機能を採用しています。
機能を採用しています。
低ピンカウントインターフェイス
低ピンカウントインターフェイス
環境コントロールイニシアチブ、
環境コントロールイニシアチブ、
H/Wモニター
H/Wモニター
ファン速度コントローラ/ モニター
ファン速度コントローラ/ モニター
ITEの「スマートガーディアン」機能
ITEの「スマートガーディアン」機能
統合IDEコントローラ
統合IDEコントローラ
Ultra DMA 33 / 66 / 100 / 133バスマスタモー Ultra DMA 33 / 66 / 100 / 133バスマスタモー
ド
ド
PIO Mode 0~4のサポート
PIO Mode 0~4のサポート
統合シリアルATAコントローラ
統合シリアルATAコントローラ
最高1.5 Gb/秒のデータ転送速度
最高1.5 Gb/秒のデータ転送速度
SATAバージョン1.0仕様に準拠。
SATAバージョン1.0仕様に準拠。
P4M900-M7 FE/P4M890-M7 FE
P4M900-M7 FE
LAN PHY
サウンド
Codec
スロット
オンボード
コネクタ
背面パネル
I/O
ボードサイ
ズ
特殊機能
OSサポー
ト
P4M890-M7 FE
Realtek RTL 8201CL PH Y
Realtek RTL 8201CL PH Y
10 / 100 Mb/秒のオートネゴシエーション
10 / 100 Mb/秒のオートネゴシエーション
半/全二重機能
半/全二重機能
ALC662
ALC662
ハイデフィニションオーディオのサポート
ハイデフィニションオーディオのサポート
5.1 チャンネルオーディオアウト
5.1 チャンネルオーディオアウト
PCIスロット
x2
PCIスロット
x2
PCI Expr ess x16スロット
x1
PCI Expr ess x16スロット
x1
PCI Expr ess x 1スロット
x1
PCI Expr ess x 1スロット
x1
フロッピーコネクタ
x1
フロッピーコネクタ
x1
プリンタポートコネクタ
x1
プリンタポートコネクタ
x1
IDEコネクタ
x2
IDEコネクタ
x2
SATAコネクタ
x2
SATAコネクタ
x2
フロントパネルコネクタ
x1
フロントパネルコネクタ
x1
フロントオーディオコネクタ
x1
フロントオーディオコネクタ
x1
CDインコネクタ
x1
CDインコネクタ
x1
CPUファンヘッダ
x1
CPUファンヘッダ
x1
システムファンヘッダ
x1
システムファンヘッダ
x1
CMOSクリアヘッダ
x1
CMOSクリアヘッダ
x1
USBコネクタ
x2
USBコネクタ
x2
電源コネクタ(24ピン)
x1
電源コネクタ(24ピン)
x1
電源コネクタ(4ピン)
x1
電源コネクタ(4ピン)
x1
PS/2キーボード
x1
PS/2キーボード
x1
PS/2マウス
x1
PS/2マウス
x1
シリアルポート
x1
シリアルポート
x1
VGAポート
x1
VGAポート
x1
LANポート
x1
LANポート
x1
USBポート
x4
USBポート
x4
オーディオジャック
x3
オーディオジャック
x3
190 mm (幅) X 244 mm (高さ)
190 mm (幅) X 244 mm (高さ)
RAID 0 / 1のサポート
RAID 0 / 1のサポート
Windows 2K / XP / VISTA
Windows 2K / XP
Biostarは事前のサポートなしにOSサポートを Biostarは事前のサポートなしにOSサポートを
追加または削除する権利を留保します。
追加または削除する権利を留保します。
2008/04/07
43