Driving to Your Destination

Main Menu

Driving to Your Destination

Viewing/Saving the Current

Location

Whenever you are on a map screen, you can always obtain your current location either by pushing in on the Interface

Dial, selecting Show Icon on Map, and selecting Current Location; or by using the voice control system and saying “Display current location.” A screen pops up which shows the address of your current location, as well as the latitude, longitude, and elevation.

NOTE:

The elevation will not appear when the system is temporarily lacking proper

GPS information. The system elevation may not agree with elevations shown on roadside elevation signs, and may fluctuate plus or minus 100 feet or more.

You can store the current location for later use. It does not change or cancel your current route.

For example, you are following the system’s directions to get to a destination. While sitting at a stoplight you notice a curio shop on the corner, but do not have time to visit it right now.

You can save the location in the personal Address Book to select as a destination at a later date.

To save the location, say “Save current location,” or select Save on the

Current location screen. The Edit address book screen with the current location data will appear. You can edit the name, phone number, or category name to be set in the personal Address

Book.

After the location is saved, select

Return to return to the map screen.

You can then use Address Book from the Enter destination by screen to select the saved location, and return to the same spot.

68 Navigation System