LG 62SX4R Owner's Manual

DLP
PROJECTION TV
OWNER'S MANUAL
Please read this manual
carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
See the label attached
and quote this
information to your dealer when you require service.
Model number
:
Serial number
:
P/NO
:
3828VA0575E
on
(MB05DB,
the back
cover
136G/100X TX,
486-395C)
a
Contents
Installation
3
Location and function of controls
Remote control handset
Battery installation
Front panel / Rear panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view / Mute function
On screen language selection (option)
8
On
9
screen menus
Menu selection
STATION MENU
Auto programme tuning
Manual programme tuning
Fine Tuning / Programme edit
Favourite Programme
Calling the programme table
10
PICTURE MENU
15
PSM(Picture Status Memory)
(Excellent Digital) / CSM (Color Starus Memory)
Manual Colour Temperature Control (User option)
sRGB (RGB[PC], HDMI[PC] mode only)
ACM (Active Color Management)
Manual Picture Control (User option)
SOUND MENU
SSM (Sound Status Memory) / BBE
AVL (Auto Volume Leveler) / Balance adjustment
Equalizer (option) / Sound output selection
Stereo/Dual reception / NICAM reception
19
TIME MENU
Clock / On/Off Timer
Auto sleep / Sleep timer
23
SPECIAL MENU
Child Lock /
25
Demo
SCREEN MENU
Auto Configuration (RGB [PC] mode only)
Manual Configuration (RGB [PC] mode only)
Setting Picture Format / Cinema
NR (Noise Reduction)
Initializing (Reset
original factory value)
PIP/DW MENU
Main Picture Source Selection
30
Picture in picture (PIP) function
On and off / Input mode selection for sub picture
Swapping between main and sub pictures
Programme selection for sub picture
Sub picture size / Sub picture position change
Adjusting PIP Transparency (PIP mode only)
31
Teletext (option)
Switch on/off / SIMPLE text
TOP text (option) / FASTEXT
Special teletext functions
33
Connection of PC
PC in socket
36
Connection of external equipment
Aerial socket
Audio/Video input sockets (option)
S-Video / Audio input sockets (option)
Monitor output sockets / DVD input sockets
DTV input sockets / HDMI
37
Replacing
the
Lamp
Troubleshooting
2
to
26
check list
41
43
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms or powercuts, please pull out the aerial and mains plugs.
Warning
To prevent fire or shock hazard, do not expose the set to rain or
moisture.
Do not place anything containing liquid on top of the set, this may
cause a
fire
or
could
give
an
electric shock.
Service
Never
the back cover of the set as this can expose you to
very high voltage and other hazards. If the set does not operate
properly, unplug it and call your dealer.
remove
Aerial
Connect the aerial cable to the socket marked +75 Ω on the back
cover. For the best reception an outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
the screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
set is placed in a position to allow a free flow of air. Do not cover
the ventilation openings on the back cover.
Avoid having a fixed image remain on the screen for a
of time. Typically a frozen still picture from a VCR, 4:3
mat or if a CH label is present;
the fixed image may remain visible on the screen.
long period
picture for-
TO AVOID BURNING IMAGE INTO THE DISPLAY, DO NOT HAVE
A STILL IMAGE ON SCREEN FOR EXTENDED PERIOD OF TIME.
IMAGE AFTER BURN WILL NOT BE COVERED UNDER WARRANTY ie.Menus, Video games, Borders or LOGOS
3
Location and function of controls
All the functions
Some functions
panel of the set.
can
can
be controlled with the remote control handset.
also be adjusted with the buttons on the front
Remote control handset
POWER
Before you use the remote control handset,
teries. See the next page.
1
MULTIMEDIA
234
TV/AV
MUTE
13
1.
SLEEP
PIP
TEXT
2.
5
PR-
PR+
3.
SWAP
INPUT
6
MENU
PR
CANCEL/EXIT
7
15
4.
5.
VOL
OK
VOL
8
123
456
8
12
SLEEP
sets the
SIZE
INDEX
TIME
MIX
MODE
I/II
STILL
REVEAL
M
/
MUTE
switches the sound
HDMI modes.
off.
to D / E or F / G direction.
P/STILL
SWAP
viewed programme.
favorite programme.
previously
a
17 7.
MENU
selects
a menu.
?
8.
D / E
(Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
ARC
PLAY
on or
picture
selects
14
REW
standby.
PIP BUTTONS
PIP
switches the sub picture on or off.
PR +/selects a programme for the sub picture.
16
LIST
18
STOP
or
off to
or
timer.
sleep
returns to the
SSM
0
10
POSITION
standby
9
6.
PSM
from
MULTIMEDIA
selects Component 1/2, RGB
Moves the sub
9
7
on
F / G
(Volume Down/Up)
adjusts the volume.
adjusts menu settings.
REC
19
FF
OK
accepts your selection
9.
or
NUMBER BUTTONS
switches the set on from
10. PSM (Picture Status
recalls your preferred
displays
standby
the current mode.
or
directly
Memory)
picture setting.
11. TELETEXT BUTTONS
(option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
12. LIST
(With TELETEXT)
4
install the bat-
SWAP
alternates between main and sub picture.
INPUT
selects the input mode for the sub picture.
SIZE
adjusts the sub picture size.
POSITION
PR
11
POWER
switches the set
please
displays
the programme table.
select
a
number.
Location and function of controls
13. TV/AV
selects the remote operating mode.
switches the set on from standby.
POWER
14. ARC
(Aspect Ratio Control)
changes the picture format.
1
MULTIMEDIA
TV/AV
2
13
15. CANCEL/EXIT
Clears all
on-screen
LIST
displays
and returns to TV
viewing
from any
menu.
ARC
14
12
MUTE
PIP
5
4
PR-
16. SSM (Sound Status Memory)
recalls your preferred sound setting.
PR+
SWAP
INPUT
6
MENU
17. STILL
PR
CANCEL/EXIT
15
7
freezes motion of the
picture.
18. I/II
selects the language during dual
selects the sound output.
VOL
language
broadcast.
OK
VOL
8
19. VCR BUTTONS
control a video cassette recorder.
PR
Note : In teletext mode, the PR
used for teletext function.
Battery
+
/
-,
SWAP and INPUT buttons
are
1
2
3
4
5
6
7
8
9
PSM
0
SSM
9
installation
The remote control handset is powered by two AAA type batteries.
To load the batteries, turn the remote control handset over and 10
open the battery compartment. Install two batteries as indicated by
the polarity symbols ( + and
) marked inside the compartment.
16
-
POSITION
SIZE
STILL
17
SLEEP
I/II
18
3
STOP
REW
P/STILL
PLAY
REC
FF
19
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the remote control handset for an
extended period of time.
(Without TELETEXT)
5
Location and function of controls
Front
panel
Lamp indicator, operation indicator, and temperature indicator, located side the front panel
reveal the operating status of the DLP(Digital Light Processing) projection TV.
*
To
*
do not
of the
sound,
press the speakers.
high quality
controls
*
MAIN POWER
TV/AV
MENU
OK
MUTE
TV/AV Button
VOL
(ON/OFF)
PR
F / G
(Volume
Down/Up)
MENU Button
E / D
Operation Indicator/
Lamp Indicator/
Temperature Indicator
(Programme Down/Up)
OK Button
MUTE Button
?Status
Indicators
Operation
Indicator
Off
Power cord is not connected
Red
Power Cord is connected, unit is
Green
On
White
(loading)
Orange
Preparing operation
Projection lamp
needs to be
Red
Lamp
(flashing)
Indicator
Red
(flashing)
Red
6
a
Contact
an
Lamp
Green
Temperature
There is
The
lamp
reaching
replaced
problem
Indicator
(flashing)
power switch is off
on
standby.
standby.
with
the end of its life and
a new
with the
lamp
lamp.
or
around it.
authorized service center.
over.
cover
is not closed.
The set has shut down due to
After
Red
life
is
in
or
viewing
the
phrase
overheating.
"Thermal
The set has shut down, check the
High
Error"
cooling
fan.
Location and function of controls
Rear
panel
(R)
AUDIO
AV3 INPUT
SOCKET
(L)/
MONO
VIDEO
S-VIDEO
AV3
INPUT
OPONNT
NPUT2
NPUT1
40/4p/
56/5p/
7p108i
OIOR
A2
OUT NPUT
A1
NPUT
PDTV
48i4p/
57i5p/
7p/080
Y
(SXG/
48
p/
p/
57
SDO
()
ADO
R)
PB
72p/
108i)
DEO
RBNPUT
ONO
PGRPORTA
D
L)
ADO
R)
E
PR
S-VIDEO
INPUT
SOCKET
L)
ADIO
R)
DVIRBNPUT
NPUT
DM
UPGRADE PORT
This
upgrade
port is used
the software
to
ver-
sion and
debug
changing
the hardware.
Be careful not to
without
use
this
port. Just
dealer
or
COMPONENT
contact your
service centre.
MONITOR
AV2
AV1
OUT
INPUT
INPUT
PC/DTV
(XGA/
480p/
576p/
720p/
1080i)
S-VIDEO
AV1/AV2 / MONITOR
OUT (AUDIO/VIDEO),
S-VIDEO INPUT
SOCKETS
HDMI/DVI
INPUT 2
INPUT 1
480i/480p/
576i/576p/
720p/1080i
480i/480p/
576i/576p/
720p/1080i
Y
PB
DTV/DVD
INPUT
PR
VIDEO
RGB INPUT
U
MONO
(L)
AUDIO
(R)
P
G
R
A
D
E
P
O
R
T
(L)
AUDIO
(R)
(L)
AUDIO
(R)
DVI / RGB INPUT
HDMI/DVI
AERIAL
SOCKET
RGB INPUT
7
Basic
Operation
On and off
1.
2.
POWER
3.
MULTIMEDIA
TV/AV
MUTE
SWAP
MENU
VOL
PR
OK
VOL
Before turning the set on, be sure that the main power switch
on the set is pushed on.
When the main switch is pushed on, the LED will be lit up red.
This mode is Stand-by.
If the set is in stand-by mode, press the POWER, D / E, TV/AV,
MULTIMEDIA or NUMBER button on the remote control handset to turn it on fully. The LED will blink orange for a while and
then lit up green when the power is successfully on.
To turn the set off, press the power button on the remote control handset. The set reverts to the stand-by mode.
Note :
a.
The lamp cooling fan will continue to spin for approximately 120
seconds after the power is turned off by the remote control handset.
b.
Normally, don't push off the main power switch. Instead, use the
remote control to turn the power off.
c.
When the set is turned on again immediately after turning off, it
takes around 20 to 40 seconds for sufficient cooling.
d.
When the power is switched off using the main power switch on
the set, the internal cooling system also stops operating.
Therefore, power-on by main power switch takes around 30 to
50 seconds for sufficient cooling.
e.
Forced Power-Off : When the set decides itself that the circumstance is not proper for operation, the set will goes to the standby mode automatically. Please retry to turn on the set after a
short period of time.
f.
When the set is switched on, there might be a strange sound from
the set.
PR
1
2
3
4
5
6
7
8
9
0
SSM
Programme
selection
You can select
buttons.
a
Volume
programme number with the D / E
or
NUMBER
adjustment
Press the F / G button to
adjust
the volume.
Quick view
Press the SWAP button to view the last programme you
were
watching.
Note
I/II
This function works only when Favourite programme is
set to Off. Otherwise each press of this button will select a stored
favourite programme.
:
Mute function
Press the MUTE button. The sound is switched off and the
appears.
You can cancel it
8
by pressing
the MUTE, F /
display
G, SSM, I/II button.
On Screen Menus
The
dialogue between you and your set takes place
required for the operating steps are also displayed.
on screen
with
an
operator
menu.
The buttons
Menu selection
1.
Press the MENU button and then D / E button to
2.
Press the G button and then the D / E button to select
3.
Repeatedly press
STATION G
display
each
a menu
the MENU button to return to normal TV
Auto programme
menu.
item.
viewing.
STATION
PSM
PICTURE G
CSM
Manual programme
PICTURE
Programme
edit
Favourite programme
SOUND
ACM
SOUND
TIME
TIME
SPECIAL
SPECIAL
SCREEN
SCREEN
PIP/DW
PIP/DW
STATION
STATION
STATION
PICTURE
PIP
50
Sharpness
60
menu
Win.
AVL
SOUND
position
PIP
Transparency
PIP
System
G
0
Equalizer
TIME
SPECIAL
SCREEN
PIP/DW
Colour
Balance
Input
Win. size
SPECIAL
50
BBE
PIP
TIME
Brightness
SSM
DW
SOUND
95
PICTURE
menu
Input
PICTURE
Contrast
SCREEN
PIP/DW
G
PIP/DW
STATION
Auto
config.
Manual
PICTURE
SOUND
menu
STATION
STATION
Child lock
PICTURE
ARC
Clock
Demo
config.
Off time
PICTURE
On time
Cinema
SOUND
Auto
SOUND
SOUND
TIME
TIME
SPECIAL
SPECIAL G
SPECIAL
SCREEN G
SCREEN
SCREEN
PIP/DW
PIP/DW
PIP/DW
TIME
NR
Reset
SCREEN
menu
SPECIAL
menu
menu
sleep
G
TIME
menu
9
STATION MENU
Up
to 100 TV stations can be stored in this set
bers
STATION G
Auto programme
Manual programme
PICTURE
SOUND
Programme
edit
Favourite programme
to use the D / E or
have preset the stations, you will be able
NUMBER buttons to scan the stations you pro-
grammed.
Stations
can
be tuned
TIME
Note
SPECIAL
num-
99). Once you
to
(0
by programme
:
In
some
using
automatic
manual modes.
or
models up to 200 TV stations
can
be stored.
SCREEN
Auto programme
PIP/DW
All stations that
can
ommended that you
tuning
be received
use
auto
by this method. It
programme during installation
are
stored
is recof this
set.
1.
2.
3.
Press the MENU button and then D / E button to select the
STATION menu.
Press the G button and then D / E button to select Auto pro-
gramme.
Press the G button to select System. Select
the F / G button;
STATION
Auto programme
G
Manual programme
PICTURE
SOUND
MENU
PR
Programme
edit
Favourite programme
System
Storage
a
TV
system with
BG
from
2
Start
TIME
SPECIAL
SCREEN
PIP/DW
VOL
OK
BG
I
DK
M
4.
1
2
3
4
5
6
8
Prev.
VOL
PR
7
Menu
9
(Asia/New Zealand/M.East/Africa/Australia)
: (Hong Kong/South Africa)
: (East Europe/China/Africa/CIS)
: (USA/Korea/Philippines) (option)
Press the E button to select Storage from. Select the beginning programme number with the F / G button or NUMBER buttons on the Storage from menu.
:
5.
Press the E button to select Start.
6.
Press the G button to begin auto programming.
To stop auto programming, press the MENU button.
0
STATION
Auto programme
Manual programme
PICTURE
SOUND
Programme
edit
Favourite programme
System
Storage
BG
from
2
Start
Auto programme
TIME
-----
SPECIAL
16
M
23%
SCREEN
PIP/DW
Menu
Stop
Prev.
In Australia, if no station name can be assigned to a
folstation, the channel number is assigned and stored as
lowed by a number see 'Assigning a station name' section to
assign the station name.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme Edit' section
to edit the stored programme.
Option:
-----
7.
10
Repeatedly press
viewing.
the MENU button to return to normal TV
STATION MENU
Manual programme
tuning
STATION G
Manual programme
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name
Auto programme
PICTURE
SOUND
with five characters to each programme number.
Programme
edit
Favourite programme
TIME
SPECIAL
1.
STATION
2.
/ E
Press the MENU button and then D
button to select the
SCREEN
PIP/DW
menu.
Press the G button and then D
/ E
button to select Manual
programme.
STATION
Auto programme
Manual programme
PICTURE
SOUND
Programme
Storage
2
System
BG
G
edit
Favourite programme
Band
Channel
TIME
Fine
SPECIAL
Search
V/UHF
1
Name
SCREEN
PIP/DW
3.
C01
Booster
Prev.
Menu
Press the G button to select
Storage. Select
F
number
with
the
programme
on the Storage menu.
4.
Press the E button to select
the F
5.
BG
:
I
:
DK
:
M
:
/ G
System. Select
NUMBER buttons
a
TV
Press the E button to select Band. Press the F
V/UHF
MENU
PR
system with
OK
VOL
or
Cable
as
/ G
button to
required.
PR
1
2
3
4
5
6
7
8
9
Press the E button to select Channel. Select the desired
possible,
44) directly
/ G
button
NUMBER buttons. If
or
number(VHF
:
1 to
75, Cable
searching.
If this station is the
If
one
or
0
/ G
button to
station is found the search will stop.
G
the
button to select
required, press
a
the desired programme number with the F
NUMBER buttons.
Storage. Select
button
2 to
:
with the number buttons.
Press the E button to select Search. Press the F
commence
9.
or
VOL
select the channel
8.
button
beginning
button;
channel number with the F
7.
/ G
the
(Asia/New Zealand/M.East/Africa/Australia)
(Hong Kong/South Africa)
(East Europe/China/Africa/CIS)
(USA/Korea/Philippines) (option)
select
6.
Off
/ G
Press the OK button to store it.
10. To store another station, repeat steps 4 to 9.
11. Repeatedly press the MENU button to return to normal TV
viewing.
11
STATION MENU
STATION G
Auto programme
Manual programme
PICTURE
SOUND
Programme
edit
Favourite programme
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
2.
3.
TIME
4.
SPECIAL
SCREEN
5.
6.
PIP/DW
1 to 2.
Press the E button to select Name.
Press the G button. You can use a blank, +, -, the numeric 0 to
9 and the alphabet A to Z.
With the E button you can select in the opposite direction.
Select the next position by pressing the G button and then take
your choice of the second character, and so on.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
Booster (option)
In some models, Booster is an optional function.
Booster can perform this function.
Only
a
set with
If the reception is poor at the fringe area of TV signal, select
Booster to On. When the picture condition is good, do not select
Booster to On.
MENU
1.
2.
3.
4.
PR
the 'Manual programme tuning' steps 1 to 2.
Press the E button to select Booster.
Press the F / G button to select On or Off.
Repeatedly press the MENU button to return to normal TV
Repeat
viewing.
VOL
OK
VOL
Fine
tuning
Normally
1.
2.
fine
tuning
is
only necessary
if
reception
is poor.
the 'Manual programme tuning' steps 1 to 2.
Press the E button to select Fine.
Repeat
PR
STATION
Auto programme
Manual programme
PICTURE
SOUND
Programme
Storage
2
System
BG
G
edit
Favourite programme
Band
Channel
TIME
Fine
SPECIAL
Search
Name
SCREEN
PIP/DW
3.
4.
5.
Booster
Menu
1
C01
Off
Prev.
Press the F / G button to fine tune for the best picture and
sound.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
The finely tuned programme will
during programme selection.
12
V/UHF
be indicated
by yellow
number
STATION MENU
Programme
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
copy a blank station data into the selected programme number.
1.
2.
3.
STATION G
Manual programme
PICTURE
SOUND
0-
-
-
-
-
edit
Favourite programme
SPECIAL
SCREEN
PIP/DW
edit
5C05
1BLN2
6C07
2C01
7C55
3C04
8S27
4C05
9S29
Delete
Copy
Move
Skip
Menu
Programme
TIME
Press the MENU button and then D / E button to select the
STATION menu.
Press the G button and then D / E button to select
Programme edit.
Press the G button to display the Programme edit menu.
Programme
Auto programme
Prev.
Deleting a programme
1. SelectaprogrammetobedeletedwiththeD/EorF/Gbutton.
2.
Press the RED button twice.
The selected programme is deleted,
grammes are shifted up one position.
MENU
all the
PR
following pro-
Copying a programme
1. SelectaprogrammetobecopiedwiththeD/EorF/Gbut-
VOL
OK
VOL
ton.
2.
3.
Press the GREEN button.
Move the programme to the desired programme number with the
D/EorF/Gbutton.
4.
Press the GREEN button again to move the programme.
All the following programmes are shifted down one position.
Moving a programme
1. SelectaprogrammetobemovedwiththeD/EorF/Gbutton.
2.
3.
Press the YELLOW button.
Move the programme to the desired programme number with the
PR
1
2
3
4
5
6
7
8
9
0
D/EorF/Gbutton.
4.
Press the YELLOW button
Skipping
1.
2.
3.
a
again
to release this function.
programme number
programme number to be
Select a
skipped with the D / E or F / G
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
gramme.
When a programme number is skipped it means that you will be
unable to select it using the D / E button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Repeatedly press
the MENU button to return to normal TV
viewing.
13
STATION MENU
Favourite
STATION G
Auto programme
Programme
This function lets you select your favourite programmes
directly.
Manual programme
PICTURE
SOUND
Programme
edit
1.
Favourite programme
2.
TIME
Press the MENU button and then use D / E button to select the
STATION menu.
Press the G button and then D / E button to select Favourite
programme.
SPECIAL
3.
SCREEN
Press the G button to
PIP/DW
display
STATION
PICTURE
the Favourite programme
Auto programme
On
Manual programme
Off
Programme
edit
Favourite programme
menu.
0BLN2
G
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
SOUND
TIME
SPECIAL
SCREEN
PIP/DW
4.
5.
6.
7.
SWAP
MENU
8.
9.
PR
Menu
Prev.
Press the D / E button to select On.
Press the G button and then D / E button to select
-----.
Select a desired programme with the F / G button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' (or
'00') in front of it, i.e. '05' (or '005') for 5.
To store another programme, repeat steps 5 to 6.
You can store up to 8 programmes.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
--
viewing.
Repeatedly
VOL
OK
VOL
press the SWAP button to select stored favorite pro-
grammes.
Calling
the programme table
You can check the programmes stored in the memory
the programme table.
PR
by displaying
programme table
Press the LIST button to display the Programme table
The programme table appears on the screen.
Displaying
0-
-
-
-
-
menu.
5C05
1BLN2
6C07
2C01
7C55
3C04
8S27
4C05
9S29
LIST
Note :
a.
You may find some blue highlighted programmes shown. They
have been set up in the programme edit mode.
b.
Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
programme in the programme table
Select a programme with the D / E or F / G button.
The set switches to the chosen programme number.
Selecting
a
Paging through a programme table
There are 10 (or 20) programme table pages which contain 100 (or
200) programmes.
Pressing the D / E or F / G button repeatedly turns the pages.
Press the LIST button to return to normal TV
14
viewing.
PICTURE MENU
PSM
1.
2.
(Picture Status Memory)
Press the MENU button and then D / E button to select the PICTURE menu.
Press the G button and then D / E button to select PSM.
STATION
PSM
PICTURE G
CSM
ACM
SOUND
TIME
SPECIAL
STATION
G
PSM
TIME
SPECIAL
Brightness
50
Colour
50
Sharpness
60
SCREEN
CSM
Mild
ACM
SOUND
95
Dynamic
Standard
PICTURE
Contrast
Contrast
95
Brightness
50
Colour
50
Sharpness
60
PIP/DW
User
SCREEN
PIP/DW
3.
4.
5.
Menu
Prev.
Press the G button and then D / E button to select a picture setting on the PSM pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
To recall your preferred setting, press the PSM button until the
desired picture (Dynamic, Standard, Mild or User) appears.
The picture Dynamic, Standard and Mild are programmed for
good picture reproduction at the factory and cannot be changed.
VOL
(Excellent Digital)
-
-
-
You
can
enjoy
MENU
the vivid and
high-definition picture
with
PR
OK
VOL
Digital
Reality processor technology.
When selecting picture options (Dynamic, Standard and
Mild) in PICTURE menu, XD is automatically changed to On.
It's not available to use this function in RGB[PC], HDMI[PC]
PR
mode.
1.
2.
Press the MENU button and then D / E button to select the PICTURE menu.
Press the G button and then D / E button to select XD.
STATION
PSM
G
PICTURE
PSM
CSM
On
Off
ACM
SOUND
TIME
SPECIAL
Contrast
95
Brightness
50
Colour
50
Sharpness
60
SCREEN
PIP/DW
3.
4.
5.
Menu
Prev.
Press the G button and then D / E button to select On or Off.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
15
PICTURE MENU
CSM
STATION
PSM
-
PICTURE G
CSM
ACM
SOUND
TIME
SPECIAL
(Color Status Memory)
Contrast
95
Brightness
50
Colour
50
Sharpness
60
-
When
selecting picture options (Dynamic, Standard and
Mild) in PICTURE menu, CSM is automatically changed to
Normal.
It's not available to
use
this function in sRGB On mode.
SCREEN
1.
PIP/DW
2.
Press the MENU button and then D / E button to select the PICTURE menu.
Press the G button and then D / E button to select CSM.
STATION
PSM
PICTURE
CSM
G
Cool
ACM
SOUND
TIME
SPECIAL
Normal
Contrast
95
Brightness
50
Colour
50
Sharpness
60
Warm
User
SCREEN
PIP/DW
3.
4.
MENU
5.
PR
Menu
Red
0
Green
0
Blue
0
Prev.
Press the G button and then use D / E button to select the
desired colour temperature.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
VOL
OK
VOL
Manual Colour
1.
2.
PR
Temperature Control (User option)
Press the MENU button and then D / E button to select the
PICTURE menu.
Press the G button and then D / E button to select CSM.
STATION
PSM
PICTURE
CSM
G
Cool
ACM
SOUND
TIME
SPECIAL
Normal
Contrast
95
Brightness
50
Colour
50
Sharpness
60
Warm
User
SCREEN
PIP/DW
3.
4.
Green
0
Blue
0
button to select User.
G button to make appropriate
/ E
/
of Red, Green and Blue is -30~+30.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
16
0
Prev.
Press the G button and then D
Press the G button and then F
adjustments.
The adjustment range
5.
6.
Menu
Red
PICTURE MENU
sRGB
-
mode
(RGB[PC], HDMI[PC]
only)
When the set was connected to external equipment with sRGB
function, It's adjusted a colour difference to display the equal
image each other.
STATION
PSM
PICTURE G
CSM
ACM
SOUND
TIME
SPECIAL
1.
2.
3.
Press the MENU button and then D / E button to select the PICTURE menu.
Press the G button and then D / E button to select sRGB.
Press the G button and then D / E button to select On or Off.
STATION
PSM
PICTURE
CSM
s-RGB
SOUND
TIME
G
Contrast
95
Brightness
50
Contrast
95
Brightness
50
Colour
50
Sharpness
60
SCREEN
PIP/DW
On
Off
SPECIAL
SCREEN
PIP/DW
4.
Press the OK
5.
Repeatedly
viewing.
ACM
-
-
-
1.
2.
3.
Menu
Prev.
or F
button.
press the MENU button to return to normal TV
MENU
(Active Color Management)
VOL
the ACM to select the desired skin colour option.
This function works in the following mode:
TV, AV1, AV2, AV3, COMPONENT [480i, 480p, 576i, 576p,
1080i], HDMI DTV [480p, 576p, 720p,1080i].
It's not available to use this function in XD Off mode.
PR
OK
VOL
Adjust
720p,
PR
Press the MENU button and then use D / E button to select the
PICTURE menu.
Press the G button and then use D / E button to select ACM.
Press the G button and then use F / G button to make approSTATION
PSM
PICTURE
CSM
G
ACM
SOUND
TIME
SPECIAL
Contrast
95
Brightness
50
Colour
50
Sharpness
60
Fleshtone
0
Greentone
0
Bluetone
0
SCREEN
PIP/DW
priate adjustments.
The adjustment range
4.
5.
Menu
Prev.
of ACM is 0
3.
~
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
17
PICTURE MENU
Manual Picture Control
STATION
PICTURE G
PSM
CSM
ACM
SOUND
TIME
SPECIAL
(User option)
Contrast
95
Brightness
50
Colour
50
Sharpness
60
You can adjust picture contrast, brightness, colour, sharpness and
tint (NTSC input only) to the levels you prefer.
In the broadcasting system PAL/SECAM, the picture item Tint
doesn't work.
SCREEN
1.
PIP/DW
2.
Press the MENU button and then D / E button to select the PICTURE menu.
Press the G button and then D / E button to select the desired
picture item.
STATION
PSM
PICTURE
CSM
ACM
SOUND
TIME
SPECIAL
Contrast
95G
Brightness
50
Colour
50
Sharpness
60
SCREEN
PIP/DW
3.
MENU
4.
PR
5.
Menu
Prev.
Press the G button and then F / G button to make appropriate
adjustments, then it will be stored for the picture User.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
VOL
OK
VOL
adjustment for PICTURE
colour, sharpness and tint) affect both
Note
PIP
PR
18
:
or
The
Twin Picture mode.
(contrast, brightness,
main and sub picture in
menu
the
SOUND MENU
SSM
(Sound Status Memory)
This function lets you enjoy the best sound without any special
adjustment because the set automatically selects the appropriate
sound option based on the program content.
When adjusting sound options equalizer manually, SSM is auto-
matically changed
1.
2.
Press the MENU button and then D / E button to select the
SOUND menu.
Press the G button and then D / E button to select SSM.
SSM
G
BBE
PICTURE
BBE
PICTURE
AVL
Balance
SOUND
G
0
Equalizer
SPECIAL
SCREEN
PIP/DW
SRS TSXT
Flat
AVL
Balance
SOUND
SSM
TIME
to User.
STATION
STATION
0
Music
Movie
Equalizer
Speech
TIME
User
SPECIAL
SCREEN
PIP/DW
3.
4.
5.
Menu
Prev.
Press the G button and then D / E button to select a sound setting on the SSM pull-down menu.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
To recall your preferred setting, press the SSM button until the
desired sound (SRS TSXT, Flat, Music, Movie, Speech or User)
appears. The sound SRS TSXT, Flat, Music, Movie and Speech
are programmed for good sound reproduction at the factory and
cannot be changed.
Note :
If you press the SSM button after making appropriate adjusta.
ment on the Equalizer sub menu, the display User automatically appears even though you have already set a factory preset setting; SRS TSXT, Flat, Music, Movie or Speech.
b.
Equalizer isn't suitable to use SRS TSXT.
MENU
VOL
PR
OK
VOL
PR
R
-
-
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from
SRS Labs, Inc.
TruSurround XT
BBE
-
BBE
ter
-
1.
2.
SSM
High Definition Sound
speech intelligibility and
It's not available to
use
and presence for betmusical realism.
this function in SRS TSXT mode.
restores
clarity
Press the MENU button and then D / E button to select the
SOUND menu.
Press the G button and then D / E button to select BBE.
STATION
SSM
BBE
PICTURE
G
Off
AVL
Balance
SOUND
On
0
Equalizer
TIME
SPECIAL
SCREEN
PIP/DW
3.
4.
5.
Menu
Prev.
Press the G button and then D / E button to select On or Off.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
19
SOUND MENU
AVL
STATION
SSM
BBE
PICTURE
AVL
Balance
SOUND
(Auto Volume Leveler)
G
0
Equalizer
If you select AVL On, the set automatically
ume level even if you change programmes.
keeps
on an
equal
vol-
TIME
1.
SPECIAL
SCREEN
2.
PIP/DW
Press the MENU button and then D / E button to select the
SOUND menu.
Press the G button and then D / E button to select AVL.
STATION
SSM
BBE
PICTURE
G
AVL
Balance
SOUND
0
On
Off
Equalizer
TIME
SPECIAL
SCREEN
PIP/DW
3.
4.
5.
Menu
Prev.
Press the G button and then D / E button to select On or Off.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
MENU
PR
Balance
VOL
OK
VOL
You
1.
PR
2.
can
adjustment
adjust
balance.
Press the MENU button and then D / E button to select the
SOUND menu.
Press the G button and then D / E button to select Balance.
STATION
SSM
BBE
PICTURE
AVL
Balance
SOUND
0G
L
R
Equalizer
TIME
SPECIAL
SCREEN
PIP/DW
3.
4.
on
the Balance
menu.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
20
Prev.
Press the G button.
Make desired adjustment with the F / G button
pull-down
5.
6.
Menu
SOUND MENU
Equalizer (option)
STATION
1.
2.
3.
Press the MENU button and then D / E button to select the
SOUND menu.
Press the G button and then D / E button to select Equalizer.
Press the G button in Equalizer to display the Equalizer sub
SSM
BBE
PICTURE
AVL
Balance
SOUND
G
0
Equalizer
TIME
SPECIAL
menu.
SCREEN
PIP/DW
STATION
SSM
BBE
PICTURE
SOUND
120
AVL
200
Balance
0
Equalizer
G
500
1.2K
TIME
3K
7.5K
SPECIAL
12K
SCREEN
PIP/DW
4.
5.
6.
7.
Menu
Prev.
Select a sound band by pressing the D / E button.
Make appropriate sound level with the F / G button.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
MENU
PR
Sound output selection
In AV
mode, you
can
select output sound for the left and
right
loud-
VOL
OK
VOL
speakers.
Repeatedly press the I/II button to select the sound output.
L+R :
Audio signal from audio L input is sent to the left loud
speaker and audio signal from audio R input is sent to the
right loud speaker.
L+L :
Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right loudspeakers.
PR
I/II
21
SOUND MENU
Stereo/Dual
When
reception
programme is selected, the sound information for the station
appears after the programme number and station name disappear.
a
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo
reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button
twice again.
selection for dual
language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loudspeakers.
DUAL I+II sends a separate language to each loudspeaker.
Language
NICAM
reception
If your set is
I/II
with the receiver for NICAM
reception, the
Companding Sound
high quality NICAM (Near Instantaneous
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
NICAM
When
MONO
2.
3.
or
mono
is
received, you
can
select NICAM
FM MONO.
NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
When
FM
22
equipped
mono.
When NICAM dual is received, you can select NICAM DUAL I,
NICAM DUAL II or NICAM DUAL I+II or MONO.
TIME MENU
Clock
You must set the time
before
correctly
on/off time function.
using
STATION
Clock
Off time
PICTURE
1.
2.
Press the MENU button and then D / E button to select the
TIME menu.
Press the G button and then D / E button to select Clock.
On time
Auto
SOUND
TIME
sleep
G
SPECIAL
SCREEN
STATION
Clock
G
:
--
--
PIP/DW
Off time
PICTURE
On time
Auto
sleep
SOUND
TIME
SPECIAL
SCREEN
PIP/DW
3.
4.
5.
6.
Menu
Prev.
Press the G button and then use D / E button to adjust the
hour.
Press the G button and then use D / E button to adjust the
minute.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
MENU
PR
On/Off Timer
Timer function operates only if current time has been already set.
Off Timer function overrides on Timer function if they are set to the
same time.
The TV must be in standby mode for the On Timer to work.
1.
2.
Press the MENU button and then D / E button to select the
TIME menu.
Press the G button and then
Time or On Time.
STATION
use D
VOL
OK
VOL
PR
/ E button to select Off
Clock
Off time
PICTURE
On time
Auto
sleep
SOUND
G
On
Off
12
:
TIME
Volume
SPECIAL
Programme
00
30
1
SCREEN
PIP/DW
3.
4.
5.
6.
7.
8.
Menu
Prev.
Press the G button and then use D / E button to select On.
Press the G button and then use D / E button to adjust the
hour.
Press the G button and then use D / E button to adjust the
minute.
Only On Time function ; Press the G button and then use D / E
button to adjust volume level and programme number.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
viewing.
23
TIME MENU
Auto
STATION
Clock
If there is
Off time
PICTURE
no
On time
Auto
SOUND
TIME
sleep
input signal,
the TV turn off
automatically
after 10 min-
utes.
sleep
G
SPECIAL
1.
Press the MENU button and then D / E button to select the
TIME menu.
2.
Press the G button and then D
SCREEN
PIP/DW
/ E button to select Auto
sleep.
STATION
Clock
Off time
PICTURE
On time
Auto
sleep
GOn
Off
SOUND
TIME
SPECIAL
SCREEN
PIP/DW
SLEEP
3.
4.
5.
Menu
Prev.
Press the G button and then D / E button to select On or Off.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
MENU
PR
Sleep
VOL
OK
VOL
Timer
timer turns the set off at the preset time.
Press the SLEEP button to select the number of minutes. The diszz
Min will appear on the screen, followed by 10, 20, 30,
play
Sleep
---
60, 90, 120, 180 and 240 minutes. The timer begins to count down
PR
from the number of minutes selected.
Note :
a. To check the
remaining sleep time,
press the SLEEP button
once.
b. To cancel the sleep time, repeatedly press the SLEEP button
zz
Min appears.
until the display
c. If you turn the set off after setting the sleep timer, the setting will
be erased.
---
24
SPECIAL MENU
Child Lock
STATION
The TV can be set so that the remote control handset is needed to
control it. This feature can be used to prevent unauthorized view-
SOUND
ing.
TIME
Child lock
Demo
PICTURE
SPECIAL G
1.
2.
Press the MENU button and then D / E button to select the
SPECIAL menu.
Press the G button and then D / E button to select Child lock.
STATION
Child lock
SCREEN
PIP/DW
GOn
Off
Demo
PICTURE
SOUND
TIME
SPECIAL
SCREEN
PIP/DW
3.
4.
5.
Menu
Prev.
Press the G button and then D / E button to select On or Off.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
MENU
With the lock on, the display Child lock On appears on the screen
if any button on the front panel is pressed while viewing the TV.
VOL
PR
OK
CANCEL/EXIT
VOL
Demo
Use it to see the difference between XD demo on and XD Demo off.
It's not available to use this function in RGB[PC], HDMI[PC] mode.
1.
2.
PR
Press the MENU button and then D / E button to select the
SPECIAL menu.
Press the G button and then D / E button to select XD Demo.
STATION
Child lock
Demo
G
To start
PICTURE
SOUND
TIME
SPECIAL
SCREEN
PIP/DW
3.
4.
Menu
Prev.
Press the G button to begin XD Demo.
To stop XD Demo, press the CANCEL/EXIT button.
25
SCREEN MENU
Auto
STATION
Auto
PICTURE
config.
ARC
1.
Cinema
SOUND
NR
Reset
2.
TIME
mode
only)
and minimizes
Automatically adjusts picture position
config.
Manual
Configuration (RGB [PC]
image shaking.
Press the MENU button and then use D / E button to select the
SCREEN menu.
Press the G button and then use D / E button to select Auto
config..
SPECIAL
SCREEN G
PIP/DW
STATION
Auto
config.
Manual
PICTURE
G
To set
config.
ARC
Cinema
SOUND
NR
Reset
TIME
SPECIAL
SCREEN
PIP/DW
3.
4.
MENU
PR
ment again.
If picture needs to be
in
(PC), you can
Repeatedly press the
viewing.
MENU button to return to normal TV
Note
a.
VOL
OK
VOL
b.
Prev.
Press the G button to start Auto config..
When Auto config. has finished, Ok will be shown on screen.
If the position of the image is still not correct, try Auto adjust-
adjusted more after Auto adjustment
adjust the Manual config..
RGB
5.
Menu
:
Although the image is still not correct, your
properly but needs further adjustment.
The Auto config. functions don't need to
set is
be
functioning
run
for HDMI
mode.
Manual
PR
Configuration (RGB [PC]
mode
only)
If the picture isn't clear after auto adjustment and especially that
characters are still trembling, adjust the picture phase manually.
To correct the screen size, adjust H Size / V Size.
1.
2.
Press the MENU button and then use D / E button to select the
SCREEN menu.
Press the G button and then D / E button to select Manual
config..
STATION
Auto
config.
Manual
PICTURE
config.
TIME
Phase
0
H Size
0
V Size
0
H Position
0
V Position
0
ARC
Cinema
SOUND
G
NR
Reset
SPECIAL
SCREEN
PIP/DW
3.
4.
5.
Menu Prev.
Press the G button and then D / E button to select Phase,
H Size, V Size, H Position or V Position.
Press the F / G button to make appropriate adjustments.
Repeatedly press the MENU button to return to normal TV
viewing.
Note : It's not available to use H-Position, V-Position function in
COMPONENT 480i/576i mode.
26
SCREEN MENU
Setting
Picture Format
You can watch the screen in various picture formats ; Spectacle,
Full (option), Original, 4:3, 16:9 (Wide), 14:9 and Zoom.
STATION
Auto
config.
Manual
PICTURE
config.
ARC
Cinema
1.
Press the MENU button and then use D / E button to select the
SOUND
2.
SCREEN menu.
Press the G button and then
TIME
use
D / E
button to select ARC.
NR
Reset
SPECIAL
SCREEN G
PIP/DW
STATION
Auto
config.
Manual
PICTURE
SOUND
config.
ARC
G
Cinema
Spectacle
Original
NR
4:3
16:9
Reset
TIME
14:9
Zoom
SPECIAL
SCREEN
PIP/DW
3.
Menu
Prev.
Press the G button and then use D / E
button to select
Spectacle, Full (option), Original, 4:3, 16:9, 14:9 or Zoom.
Spectacle
When your TV receives the wide screen signal, following selection will lead you to adjust the picture horizontally, in a linear proportion, to fill the entire screen.
Full (option)
When your TV receives the wide screen signal, following selection will lead you to adjust the picture horizontally or vertically, in
a linear proportion, to fill the entire screen fully.
MENU
VOL
PR
OK
VOL
Original
When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent. (Not available
in all countries)
PR
4:3
selection will lead you to view a picture with an original
4:3 aspect ratio, with black bars appearing at both the left and
right sides.
Following
16:9
(Wide)
Following selection will lead you to adjust the picture horizontally, in a linear proportion, to fill the entire screen (useful for viewing 4:3 formatted DVDs).
14:9
You
enjoy the picture format of 14:9 or general TV programme through the 14:9 mode. The screen 14:9 is viewed just
like that the screen 4:3 is magnified to the left / right.
can
ARC
Zoom
selection will lead you to view the picture without any
alternation, while filling the entire screen. However, the top and
bottom portions of the picture will be cropped.
Following
4.
Repeatedly
viewing.
Note
:
You
can
press the MENU button to return to normal TV
only
select 4:3 and 16:9
(Wide)
in RGB and HDMI.
27
SCREEN MENU
Cinema
STATION
Auto
config.
Manual
PICTURE
When you watch the movie, this function adjusts the set to the best
picture appearance.
This function works in the following mode : TV, AV1, AV2, AV3 or
COMPONENT 480i/576i.
config.
ARC
Cinema
SOUND
NR
Reset
TIME
SPECIAL
SCREEN G
1.
PIP/DW
2.
Press the MENU button and then D / E button to select the
SCREEN menu.
Press the G button and then D / E button to select Cinema.
STATION
Auto
config.
Manual
PICTURE
config.
ARC
Cinema
SOUND
TIME
GOn
Off
NR
Reset
SPECIAL
SCREEN
PIP/DW
3.
4.
MENU
5.
PR
Menu Prev.
Press the G button and then D / E button to select On or Off.
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
VOL
OK
VOL
NR
1.
PR
2.
(Noise Reduction)
Press the MENU button and then D / E button to select the
SCREEN menu.
Press the G button and then D / E button to select NR.
STATION
Auto
config.
Manual
PICTURE
config.
ARC
Cinema
SOUND
NR
Reset
TIME
G
3DNR
0
MPEG NR
0
SPECIAL
SCREEN
PIP/DW
3.
4.
Menu Prev.
Press the G button and then use D / E button to select 3D NR
or MPEG NR.
Press the F / G button to make appropriate adjustments.
2.
The adjustment range of 3D NR is 0
The adjustment range of MPEG NR is 0
15.
Press the OK button.
Repeatedly press the MENU button to return to normal TV
~
~
5.
6.
viewing.
Note : It's available to use 3D NR function in TV, AV1, AV2, AV3
COMPONENT (480i/576i) mode.
28
or
SCREEN MENU
to
Initializing (Reset
original factory value)
STATION
This function operates in current mode.
To initialize the adjusted value.
Auto
config.
Manual
PICTURE
config.
ARC
Cinema
SOUND
NR
Reset
TIME
1.
2.
Press the MENU button and then D / E button to select the
SCREEN menu.
Press the G button and then D / E button to select Reset.
STATION
Auto
SCREEN G
PIP/DW
config.
Manual
PICTURE
SPECIAL
config.
ARC
Cinema
SOUND
NR
Reset
G
Toset
TIME
SPECIAL
SCREEN
PIP/DW
3.
Menu
Prev.
Press the G button.
Position, PIP size, PIP position, PIP
Transparency, Clock, Phase, H-POS, V-POS and sub picture
You
can
initialize
size of twin
picture.
MENU
VOL
PR
OK
VOL
PR
29
PIP/DW MENU
Main Picture Source Selection
STATION
Input
PICTURE
PIP
PIP
SOUND
Input
Win. size
Win.
TIME
SPECIAL
for TV, AV1, AV2, AV3, Component1,
or RGB, HDMI mode. AV mode is used when a video
cassette recorder (VCR), or other equipment is connected to the
Inputs can
Component2
DW
position
PIP
Transparency
PIP
System
be
set
set.
SCREEN
PIP/DW
Note : When a VCR is connected via the aerial socket the set is
used in TV mode. See the 'Connection of external equipment' section.
G
1.
2.
3.
TV/AV
Press the MENU button and then D / E button to select the
PIP/DW menu.
Press the G button and then D / E button to select Input.
Press the G button and then D / E button to select TV, AV1,
AV2, AV3, Component1, Component2
STATION
PICTURE
AV1
PIP
AV2
TIME
SPECIAL
MENU
PIP/DW
VOL
AV3
Win. size
Component1
Win.
Component2
position
HDMI/DVI.
PIP
Transparency
RGB
PIP
System
HDMI/DVI
SCREEN
PR
OK
Input
RGB,
TV
DW
PIP
SOUND
G
Input
or
Menu
Prev.
VCR connected to the AV1 INPUT sockets of the set
: VCR connected to the AV2 INPUT sockets of the set
AV3 : VCR connected to the AV3 INPUT sockets of the set
Component1/2 : DVD connected to the DTV/DVD INPUT sockets on the back of set
RGB : PC connected to the RGB INPUT sockets on the back of
AV1
AV2
VOL
PR
:
set
1
2
3
4
5
6
4.
7
8
9
5.
HDMI/DVI : DTV/DVD INPUT connected to the HDMI/DVI
INPUT sockets on the back of set
Press the OK or F button.
Repeatedly press the MENU button to return to normal TV
viewing.
0
Alternatively you can select the TV, AV, Component
mode by pressing the TV/AV button.
In
AV, Component
press the D / E
30
or
or
RGB, HDMI mode,
NUMBER buttons.
or
RGB, HDMI
to return to TV
mode,
Picture In Picture
Option :
PIP (Picture
In
Picture) displays
a
picture
within
a
(PIP)
Function
picture.
On and off
Press the PIP button to switch on the sub picture.
Press CANCEL/EXIT button to switch it off.
Each press of PIP button button changes the screen
shown below.
display
as
PIP
PR-
SWAP
PR+
INPUT
CANCEL/EXIT
Note
ture
:
When the sub
picture
size is 1/2 of the main
picture,
the
pic-
quality might get poor.
Input
mode selection for sub
Press the INPUT button to select the
picture
input
Each time this button is pressed, each
ture is displayed as shown below.
Programme
number
mode for the sub
input
picture.
mode for the sub
pic-
AV2
AV1
AV3
HDMI/DVI
RGB
Component2
Component1
Note :
a.
When the PIP function is switched on, you can also adjust it in
the PIP/DW menu.
b. In some models, when the sub picture quality get poor in AV
modes for sub picture, select Auto, PAL, SECAM or NTSC in
PIP System menu.
Swapping
between main and sub
Press the SWAP button to
Note : When the main
available.
Programme
the main and sub
exchange
picture
is TV
pictures
or
selection for sub
AV
pictures.
modes, the swapping is
picture
The sub picture programme selection is available when the sub picture is TV mode. Press the PR +/- buttons to select a programme
for the sub picture.
31
Picture In Picture
Sub
picture
(PIP)
Function
size
Press the SIZE button and then F / G button to adjust the sub picture picture size.
With SIZE button in DW1, DW2 modes, main and sub picture is
adjusted simultaneously. With SIZE button in PIP mode, sub picture
is
adjusted.
Sub
picture position change
Press the POSITION button.
Repeatedly press the D / E
is achieved. The sub picture
MENU
Adjusting
PR
1.
VOL
VOL
2.
PIP
or F
/ G button until desired
moves
up/down
Transparency (PIP
or
position
left/right.
mode
only)
Press the MENU button and then D / E button to select the
PIP/DW menu.
Press the G button and then D / E button to select PIP
Transparency.
3.
Press the G button and then F / G button to
4.
parency.
The adjustment range of PIP Transparency is 0
10.
Repeatedly press the MENU button to return to normal TV
adjust
PIP trans-
~
PR
viewing.
POSITION
32
SIZE
Teletext
Teletext
(or TOP text)
is
with the teletext system
Teletext is
a
an
can
optional function,
grammes, share
information
prices
therefore
only
a
set
receive the teletext broadcast.
free service broadcast
up-to-the-minute
(option)
on
most TV stations which
by
news,
and many other
The teletext decoder of this TV
can
gives
weather, television pro-
topics.
support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corre-
sponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
TEXT
Switch on/off
Press the TEXT button to switch to teletext.
If TV and text
picture
displayed half and half of the
again to display text picture fully.
are
press the TEXT button
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time
PR
displayed
headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
on
the
are
screen,
screen
reappears.
PR
SIMPLE text
Page
1.
2.
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The D / E button can be used to select the
preceding
or
a
2
3
4
5
6
7
8
9
0
fol-
lowing page.
Programming
1
MODE
M
colour button in LIST mode
If the TV is in SIMPLE text, TOP text
M
button to switch to LIST mode.
or
FASTEXT mode, press the
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
the remote control handset.
1. Press a coloured button.
2. Using the NUMBER buttons, select the page you wish to pro3.
4.
gramme.
Press the OK button. The selected page is stored as the selected page number, blinking once to confirm this. From now on,
you can select this page with the same coloured button.
The three other coloured buttons are programmed in this way.
33
Teletext
TOP text
The
(option)
(option)
four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
user
guide displays
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3.
TEXT
With the green button you can proceed to the next
page with automatic overflow to the next group.
Alternatively
4.
The
red
the D button
button
Alternatively
the E
can
permits
can
to
existing
be used.
return
to
previous
selection.
be used.
PR
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
FASTEXT
PR
1
2
3
4
5
6
7
8
9
0
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page
selection
1.
Press the
2.
You
can
button to select the index page.
select the pages which are colour coded
i
along
the bot-
tom line with the same coloured buttons.
INDEX
3.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
4.
The D / E button
lowing page.
34
can
be used to select the
preceding
or
fol-
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to display concealed information, such as
solutions of riddles or puzzles.
Press this button again to remove the information from the
display.
SIZE
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the
page.
Press this button
again
to return to the normal
TEXT
display.
UPDATE
Displays the TV picture on the screen while waiting for the new
will appear at the top left hand
teletext page. The display
corner of the screen. When the updated page is available then
will change to the page number.
display
Press this button to view the
updated
PR
teletext page.
HOLD
the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of
sub pages and the sub page displayed is, usually, shown
on the screen below the time. When this button is pressed
the stop symbol is displayed at the top left-hand corner of
the screen and the automatic page change is inhibited.
To continue press this button again.
Stops
PR
1
2
3
4
5
6
7
8
9
0
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
INDEX
To switch the TV picture off press this button again.
Note : When TV and text picture are displayed half and half
of the screen, MIX function is not available.
TIME
This button has two functions:
a) When viewing a TV programme, press this button to display the time at the top right hand corner of the screen.
Press this button again to remove the display.
b) In teletext mode, press this button to select a sub page
number. The sub page number is displayed at the bottom
of the screen. To hold or change the sub page, press the
RED/ GREEN D / E or NUMBER buttons. Press this button again to exit this function.
35
Connection of PC
PC in socket
COMPONENT
INPUT 2
480i/480p/
576i/576p/
720p/1080i
MONITOR
AV2
AV1
OUT
INPUT
INPUT
PC/DTV
(XGA/
480p/
576p/
720p/
S-VIDEO
INPUT 1
480i/480p/
576i/576p/
(L)
AUDIO
(R)
U
P
G
R
A
D
E
2.
Connect the audio cable from the PC to the RGB INPUT
Y
PB
PR
MONO
Connect the
720p/1080i
1080i)
VIDEO
1.
cable from the monitor output socket of the
PERSONAL COMPUTER to the PC input socket of the set.
signal
RGB INPUT
P
O
R
T
AUDIO sockets
(L)
AUDIO
(R)
(L)
AUDIO
on
the back of the set.
(R)
DVI / RGB INPUT
3.
Press the TV/AV
MULTIMEDIA button to select RGB
or
or
HDMI/DVI
HDMI/DVI.
4.
Switch
the PC, and the PC screen appears
The set can be operated as the PC monitor.
Note
a.
on
the set.
:
Connect PC to the PC
input
sockets of the set after
changing
the resolution of PC.
PERSONAL COMPUTER
b.
If you want to watch the PC monitor
the POWER button
only,
of the PC isn't
Displayable
MODE
EGA
VGA
SVGA
XGA
switch off the set with
the remote control handset.
on
switch off the set with the ON/OFF button
on
the set, the
(If
you
screen
displayed.)
Monitor
Specification
Resolution
640X350
640X480
800X600
1024X768
(Synchronization input
36
on
form
:
Horizontal
Vertical
Frequency (KHz)
Frequency (Hz)
37.9
85
31.5
60
37.9
72
37.5
75
43.3
85
35.1
56
37.9
60
48.1
72
46.9
75
53.7
85
48.4
60
56.5
70
60.0
75
68.7
85
separate)
Connection of external
You
can
connect additional
such
equipment,
as
equipment
VCRs, camcorders
etc. to your set.
COMPONENT
INPUT 2
Here shown may be somewhat different from your set.
INPUT
480i/480p/
576i/576p/
720p/1080i
MONITOR
OUT
AV2
INPUT
AV1
INPUT
S-VIDEO
1
480i/480p/
576i/576p/
720p/1080i
PC/DTV
Y
(XGA/
480p/
576p/
720p/
1080i)
PB
PR
VIDEO
U
MONO
Aerial socket
RGB INPUT
(L)
AUDIO
(R)
P P
G O
R R
A T
D
(L)
(L)
AUDIO
AUDIO
(R)
(R)
E
DVI / RGB INPUT
1.
2.
3.
4.
5.
Connect the RF out socket of the VCR to the aerial socket on
the back of the set.
Connect the aerial cable to the RF aerial in socket of the VCR.
Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.
Select the programme number where the VCR channel is
stored.
Press the PLAY button on the VCR.
HDMI/DVI
VCR
COMPONENT
INPUT 2
INPUT
480i/480p/
576i/576p/
720p/1080i
MONITOR
OUT
AV2
INPUT
AV1
INPUT
S
VIDEO
1
480i/480p/
576i/576p/
720p/1080i
PC/DTV
Y
(XGA/
480p/
576p/
720p/
1080i)
PB
PR
VIDEO
RGB INPUT
U
MONO
P P
Audio/Video
input
sockets
(L)
(option)
(L)
G
AUDIO
(R)
O
R R
A T
D
(L)
AUDIO
AUDIO
(R)
(R)
E
DVI / RGB INPUT
HDMI/DVI
1.
Connect the audio/video out sockets of the VCR to audio/video
in sockets of the set.
2.
3.
Press the TV/AV button to select AV1, AV2
Press the PLAY button on the VCR.
The VCR
playback picture appears
on
the
or
AV3.
VCR
screen.
(R)
Note
:
If you have
a mono
VCR,
connect the audio cable from the
AUDIO
(L)/
MONO
VIDEO
VCR to the AUDIO
socket of the set.
L/MONO
S-VIDEO
AV3
INPUT
S-Video / Audio
input
sockets
(option)
VCR
When
connecting
quality
will be further
1.
an
VCR to the S-VIDEO socket, the
picture
improved.
Connect the S-video socket of the VCR to the S-VIDEO socket
COMPONENT
INPUT
of the set.
MONITOR
OUT
AV2
INPUT
AV1
INPUT
S VIDEO
2.
Connect the audio cable from the VCR to the AUDIO sockets of
the AV1, AV2 or AV3.
Select AV1, AV2 or AV3
1
480i/480p/
576i/576p/
720p/1080i
PC/DTV
Y
(XGA/
480p/
576p/
720p/
1080i)
PB
PR
VIDEO
RGB INPUT
U
MONO
P
P
GO
R R
(L)
3.
INPUT
2
480i/480p/
576i/576p/
720p/1080i
AUDIO
(L)
A T
D
E
(R)
(L)
AUDIO
AUDIO
(R)
(R)
DVI / RGB INPUT
by pressing
the TV/AV button repeat-
HDMI/DVI
edly.
4.
Press the PLAY button
The VCR
Note
:
on
the VCR.
playback picture appears
on
the
SET TOP Box
screen.
If both S-VIDEO and VIDEO sockets have been connected
to the VCR
simultaneously, only
the S-VIDEO
can
be received.
COMPONENT
INPUT
2
480i/480p/
576i/576p/
720p/1080i
MONITOR
OUT
AV2
INPUT
AV1
INPUT
S-VIDEO
INPUT
1
480i/480p/
576i/576p/
720p/1080i
PC/DTV
Y
(XGA/
480p/
576p/
720p/
1080i)
PB
PR
VIDEO
U
MONO
(L)
AUDIO
Monitor
output
(R)
sockets
Connect the audio/video in sockets of the other TV
P P
GO
R R
A T
D
E
RGB INPUT
(L)
AUDIO
(R)
(L)
AUDIO
(R)
DVI / RGB INPUT
HDMI/DVI
or
monitor to
MONITOR OUTPUT sockets of the set.
VCR
37
Connection of external
DVD
1.
input
equipment
sockets
Connect the DVD output sockets (Y Cb Cr, Y Pb Pr, Y B-Y R-Y
or Y PB PR) of the DVD to the DTV/DVD sockets (Y PB PR) of the
COMPONENT
INPUT
576i/576p/
720p/1080i
MONITOR
OUT
AV2
INPUT
3.
4.
1.
2.
3.
input
Y
(XGA/
480p/
576p/
720p/
1080i)
PB
PR
VIDEO
U
MONO
P P
G O
R R
(L)
Connect the audio cable from the DVD to COMPONENT sockets of the set.
Press the TV/AV or MULTIMEDIA button to select
Component 1 or Component 2.
Press the PLAY button on the DVD.
The DVD playback picture appears on the screen.
DTV
1
480i/480p/
576i/576p/
720p/1080i
PC/DTV
S-VIDEO
set.
2.
AV1
INPUT
INPUT
2
480i /480p/
AUDIO
RGB INPUT
(L)
A T
D
E
(R)
(L)
AUDIO
AUDIO
(R)
(R)
DVI / RGB INPUT
HDMI/DVI
DVD
sockets
Connect the SET TOP inputs to the DTV/DVD sockets (Y PB PR)
of the set. (or, connect the SET TOP with the D-Sub output
socket to RGB INPUT socket on the set and audio cable of the
HD-SET TOP to the AUDIO sockets of RGB/DVI INPUT.)
Connect the audio cable from the SET TOP to the DTV/DVD
AUDIO sockets of the set.
Press the TV/AV or MULTIMEDIA button to select
Component 1, Component 2, RGB or HDMI/DVI.
COMPONENT
INPUT 2
480i/480p/
576i/576p/
720p/1080i
MONITOR
OUT
AV2
INPUT
AV1
INPUT
INPUT
PC/DTV
Y
(XGA/
480p/
576p/
720p/
1080i)
S-VIDEO
1
480i/480p/
576i/576p/
720p/1080i
PB
PR
VIDEO
U
MONO
P P
GO
R R
(L)
AUDIO
A T
D
E
(R)
RGB INPUT
(L)
(L)
AUDIO
AUDIO
(R)
(R)
DVI / RGB INPUT
HDMI/DVI
SET TOP Box
COMPONENT
INPUT 2
480i/480p/
576i/576p/
720p/1080i
MONITOR
OUT
AV2
INPUT
AV1
INPUT
S-VIDEO
INPUT
1
480i/480p/
576i/576p/
720p/1080i
PC/DTV
Y
(XGA/
480p/
576p/
720p/
1080i)
PB
PR
VIDEO
U
MONO
(L)
AUDIO
(R)
P P
G O
R R
A T
D
RGB INPUT
(L)
AUDIO
(L)
AUDIO
(R)
(R)
E
DVI / RGB INPUT
HDMI/DVI
SET TOP Box
38
Connection of external
-
-
HDMITM, the HDMI logo and High-Definition Multimedia Interface
marks of HDMI Licensing.
This set can receive the High-Definition Multimedia Interface
equipment
are
trademarks
(HDMI)
or
Input
or
of
registered
Digital
trade-
Visual
Interface(DVI).
-
-
-
-
-
This set supports HDCP (High-bandwidth Digital Contents Protection) Protocol for the set (480p,
720p, 1080i) modes.
When you Connect with HDMI/DVI Source Devices (DVD Player or Set Top Box or PC) supporting
Auto HDMI/DVI function, automatically, support Plug & Play and then set the HDMI/DVI Source
Devices (640 x 480p). After reading in HDMI/DVI Source Devices using Display Data Channel(DDC)
Protocol, EDID stored in the set is used. If HDMI/DVI Source Devices not supported Auto HDMI/DVI is
been, the Resolution is set, manually.
To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.
When Source Devices have DVI Output Connector, you must connect audio with separated
cable.(Refer to <How to connect>)
How to connect
1. When Source Devices (DVD Player or Set Top Box) support HDMI.
If Source Devices have HDMI Output Connector, Source Devices connect to the set with HDMI Cable
-
with the product).
If Source Devices support Auto HDMI, automatically, Source Devices divert output resolution in 1280 x
720p. But if not, resolution divert Manually Setting for reference Manual of Source Devices.
To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
Because HDMI sends Digital Video and Audio with one cable, need not especial Audio Cable for using
HDMI Cable.
.(not supplied
-
-
-
2. When Source Devices (DVD
If Source Devices have DVI
-
-
-
-
Player or Set Top Box) supports DVI.
Output Connector, Source Devices connect to the set with HDMI to DVI
Cable (not supplied with the product).
If Source Devices support Auto DVI, automatically, Source Devices divert output resolution in 1280 x
720p. But if not, resolution divert Manually Setting for reference Manual of Source Devices.
To get the best picture quality, adjust the DVD Player or Set Top Box output resolution to 1280 x 720p.
In this case, Audio use other cable. When Source Devices have Analog Audio Output Connector,
RGB/DVI Audio Input of the set connect to Audio Cable (not supplied with the product). And then you
can
listen to normal Audio.
3. When PC supports DVI.
If PC have DVI Output Connector, Source Devices connect to the set with HDMI to DVI Cable (not supplied with the product).
To get the best picture quality, adjust the PC graphics card to 1024 x 768, 60Hz.
Use the the set's HDMI/DVI (VIDEO) for video connections, depending on your PC connector.
If the graphics card on the PC does not output analog RGB and DVI simultaneously, connect only one
of either RGB Input or HDMI/DVI Input to display the PC on the set.
If he graphics card on the PC does output analog RGB and DVI simultaneously, the set to either RGB
Input or HDMI/DVI Input; (the other mode is set to Plug and Play automatically by the set.)
Then, make the corresponding audio connections. If using a sound card, adjust the PC sound as
-
-
-
-
-
-
required.
-
other cable. When PC (or sound card of PC) have Analog Audio Output
Connector, RGB/DVI Audio Input of the set connect to Analog Audio Cable (not supplied with the product). And then you can listen to normal Audio.
In this case, Audio
use
39
Connection of external
equipment
Reference
Cable
sample
HDMI Cable
(not supplied
with the
product)
HDMI to DVI Cable
(not supplied
with the
product)
Analog Audio Cable (RCA type)
(not supplied with the product)
Analog Audio Cable (Stereo to RCA type)
(not supplied with the product)
How to use
1. Connect the HDMI/DVI Source Devices(DVD Player or Set Top Box or PC) and the set.
2. Turn on the display by pressing the POWER button on the set and HDMI/DVI Source Devices remote
control.
3. Select HDMI/DVI Input source in Main Input option of PIP/DW menu.
4. Check the image on your set. There may be noise associated with the resolution, vertical pattern, contrast or brightness in HDMI/DVI Source Devices. If noise is present, change the HDMI/DVI Source
Devices to another resolution, change the refresh rate or adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the PC graphics card can not changed, change the PC
graphics card or consult the manufacturer of the PC graphics card.
Notes:
-
-
-
-
-
Depending on the graphics card, DOS mode may not work if you use a HDMI to DVI Cable.
Avoid keeping a fixed image on the set screen for a long period of time. The fixed image may become
permanently imprinted on the screen. Use the Orbiter screen saver when possible.
When Source Devices connected HDMI/DVI Input, output PC Resolution(VGA, SVGA, XGA), Position,
Size may not fit to Screen. As shown the lower picture, press the MENU button to adjust the screen
Position of the set and contact an PC graphics card service center.
When Source Devices connected HDMI/DVI Input output the set Resolution(480p, 720p, 1080i), the set
Display fit EIA/CEA-861-B Specification to Screen. If not, refer to the Manual of HDMI/DVI Source
Devices or contact your service center.
In case HDMI/DVI Source Devices is not connected Cable or poor cable connection, "No Signal" OSD
display in HDMI/DVI Input. And In case of Video Resolution not supported the set output in HDMI/DVI
Source Devices, "No Signal" OSD display. Refer to the Manual of HDMI/DVI Source Devices or contact
your service center.
40
Replacing
Lamp
unit
the
Lamp
replacement
<Front
*
You must
replace
the
when:
lamp
image gets darker or starts to deteriorate.
The lamp indicator is orange.
The lamp indicator is red.
The message "Replace the lamp" appears on the
when turning the TV on.
panel
of the TV>
The
Be careful when
-
-
-
-
-
-
-
-
replacing lamp
Lamp
indicators
Turn off the power with the remote control. In 3 minutes, press the power button to off on the front
panel and unplug the power cord.(For 2 minutes, cooling fan works after turning off power)
Allow the
lamp to cool for 30 minutes before replacing it.
Replace only with the same type lamp from a LG Electronics Service Centre. Using other lamp type
may cause damage to the TV and lamp.
Pull out the lamp only when replacing the lamp.
Keep the lamp unit out of reach of children or and heat sources such as radiators, stoves.
To reduce the risk of fire, lamp shall not be exposed to liquids or foriegn material.
Do not place the lamp near any heat source.
Make sure the new lamp is securely tightened with screws. If not, the image may be dark or there
could be
-
screen
risk of fire.
a
Never touch the
To obtain
Lamp
a
Lamp
model number is
other type of
unit
or
on
a
the
lamp
otherwise get it
dirty.
unit
cover.
check the
lamp
LG electronic service center.
lamp may
cause
damage
to the TV or
lamp.
disposal
LG electronic is
Dispose
glass
replacement Lamp
model and then locate
Using
unit
lamp
of the
provided with an interlock to reduce the risk of excessive ultraviolet
used lamp by returning it to the LG electronic service center.
radiation.
41
the
Replacing
Replacing
the
Lamp
1. Turn off the power
on
the remote control to STBY. In 3 minutes,
press the power button to off
power cord.
(Allow
the
lamp
2. Remove the 2
on
the front
panel
to cool for 30 minutes before
retaining
screws on
screwdriver then separate the
3. Remove the two
Lamp
retaining
the
lamp
lamp
cover
screws on
the
and
unplug
the
replacing it.)
cover
with
a
"+"
type
from the TV.
lamp
case
by using
"-"
lamp
case
Screws
type screwdriver.
4. Lift up the fixed wire knob
5. Pull out the knob
6. Insert the
slowly
on
and
Screws
lamp.
remove
the
lamp
into the correct
lamp gently
correctly.
new
is inserted
the
case.
position.
Make
7.
Tighten
8.
Replace the lamp cover and tighten the cover screws.
(If the lamp cover is open, the lamp indicator flashes green
the TV will not turn on.)
Note
the
-
-
and
:
is open, the TV will not turn
Reset
*
Lamp
You must reset
In
some
button
on
on.
Knob
Use Time
time
lamp
on
the
or
ENTER button
the remote control
2. Press the OK
Lamp
cover
menu
after
replacing
the
lamp.
models, the lamp time may not be reset.
1. Press the OK
42
it
you removed in step 3.
screws
Only use LG approved lamp replacement.
Using incorrect type of lamp may cause damage to the
TV or lamp.
Make sure the lamp cover is securely fastened. If the lamp
-
*
sure
use
or G
button.
time will be reset.
panel and MUTE
simultaneously (About 5 seconds).
on
the front
Lamp
Use Time Reset Menu
100
Lamp Use Time
Total Lamp Use Time 11011
G
Lamp Use Time Reset
Reset
[Enter key]
Cancel
[Exit key]
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Remote control does not work
Poor
brightness
Strange
sound from inside the monitor
Check these items and try to
adjust these
The mains
plug-(plugged
in and switched
on)
Is the TV switched on?
Try
another channel
(weak signal)
Check aerial
(plugged
into
Check aerial
(broken lead?)
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in remote control
Check Audio/Video sockets
Contact LG service
A
(VCR only)
provider(s)
in ambient humidity or temperature may result in an unusual noise at the
time of switching off or on of the monitor and
does not indicate a fault with the monitor
change
43