LG L1710M User's Guide

User's Guide
L1710M
Make
sure
to read the
Important Precautions before using the product.
Keep the User's Guide(CD) in an accessible place for furture reference.
See the label attached
dealer when you
on
the back cover and quote this information to your
require service.
This unit has been
engineered and manufactured to ensure your personal
safety, however improper use may result in potential e shock or fire hazards.
In order to allow the proper operation of all safeguards incorporated in this
display, observe the following basic rules for its installation, use, and
servicing.
On
Safety
power cord supplied with the unit. In case you use another power
cord, make sure that it is certified by the applicable national standards if not being
provided by the supplier. If the power cable is faulty in any way, please contact the
Use
only the
manufacturer
or
the nearest authorized
repair service provider for a replacement.
The power supply cord is used as the main disconnection device. Ensure that the
socket-outlet is easily accessible after installation.
Operate the display only from a power source indicated in the specifications of
this manual or listed on the display. If you are not sure what type of power supply
you have in your home, consult with your dealer.
Overloaded AC outlets and extension cords
cords and broken
plugs. They
technician for replacement.
Do not
Open
There
the
may result in
are
a
dangerous. So
shock
or
are
frayed
power
fire hazard. Call your service
Display.
serviceable components inside.
There are Dangerous High Voltages inside, even when the power is OFF.
Contact your dealer if the display is not operating properly.
are no user
To Avoid Personal
Injury :
Do not place the display on a sloping shelf unless properly secured.
Use only a stand recommended by the manufacturer.
To Prevent Fire
or
Hazards:
Always turn the display OFF if you leave the room for more than a short period
of time. Never leave the display ON when leaving the house.
Keep children from dropping or pushing objects into the display's cabinet
openings. Some internal parts carry hazardous voltages.
Do not add accessories that have not been designed for this display.
During a lightning storm or when the display is to be left unattended for an
extended period of time, unplug it from the wall outlet.
On Installation
Do not allow
the
anything
display where the
Do not
use
this
to rest upon or roll over the power
power cord is
display
sink, laundry tub, in
near water
a wet
cord, and do
not
place
subject to damage.
such
basement,
as near a
or near a
bathtub, washbowl, kitchen
swimming pool.
Displays are provided with ventilation openings in the cabinet to allow the release
of heat generated during operation. If these openings are blocked, built-up heat
failures which may result in a fire hazard. Therefore, NEVER:
Block the bottom ventilation slots by placing the display on a bed, sofa, rug, etc.
Place the display in a built-in enclosure unless proper ventilation is provided.
can cause
Cover the openings with cloth or other material.
Place the display near or over a radiator or heat source.
Do not rub
mar,
strike the Active Matrix LCD with
anything hard
or damage the Active Matrix LCD permanently.
or
Do not press the LCD
some
screen
with your
finger for a long
time
as
as
this may scratch,
this may
cause
afterimages.
Some dot defects may appear as Red, Green or Blue spots on the screen.
However, this will have no impact or effect on the display performance.
If
possible, use the recommended resolution to obtain the best image quality for
your LCD display. If used under any mode except the recommended resolution,
some scaled or processed images may appear on the screen. However, this is
characteristic of the fixed-resolution LCD panel.
On
Cleaning
Unplug the display before cleaning the face of the display screen.
Use a slightly damp (not wet) cloth. Do not use an aerosol directly
screen because over-spraying may cause electrical shock.
On
on
the
display
Repacking
Do not throw away the carton and packing materials. They make an ideal
container in which to transport the unit. When shipping the unit to another
location, repack it in its original material.
Connecting
the
Display
Using the Computer
1. Connect the signal cable. When attached, tighten the thumbscrews to secure
the connection.
2. Connect the power cord into a proper power outlet that is easily accessible and
close to the
display.
NOTE
This is
simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
a
Power Cord
Signal Cable
Analog signal
D-sub*
*
Varies according to model.
Wall-outlet
type*
2
1
Mac adapter
PC-outlet
For Apple Macintosh use,
type*
a
separate plug adapter is
needed to change the 15 pin
high density (3 row) D-sub
VGA connector on
thesupplied cable to a 15 pin
PC
2 row connector.
MAC
3.
Press
power
Image
button
on
the front switch
panel
to turn the
When monitor power is turned on, the 'Self
Setting Function' is executed automatically.
on.
NOTE
'
Self
provides the user with optimal display settings.When the user
connects the monitor for the first time, this function automatically adjusts the display to optimal settings for
individual input signals. If you want to adjust the monitor while in use, or wish to manually run this function once
again, push the 'AUTO' button on the front panel of the monitor. Otherwise, you may execute the Factory reset'
option on the OSD adjustment menu. However, be aware that this option initializes all the menu items except
'Language'.
Image Setting
Function'? This function
'
A3
Connecting
the
Display
Side Jack
Headphone/Earphone Input
Automatically mutes the speaker volume
when the headphones are plugged in.
<Display>
Bottom
Microphone Output
Connects to the microphone jack
of the
PC sound card.
Microphone Input
Connects to the microphone.
Audio
Input
Connects to the *LINE OUT
MIC.
OUT
MIC.
IN
AUDIO
IN
jack
of the
PC sound card.
*LINE OUT
A terminal used to connect to the
speaker including a built-in amplifier
(Amp). Make sure that the connecting
terminal of the PC sound card is checked
<Display
-
before
Back>
sound
connecting. If the Audio Out
card has only Speaker Out,
of PC
reduce the PC volume.
If the Audio Out of the PC sound card
Speaker Out
supports both Speaker Out and Line Out,
convert to Line Out
MIC IN
*Line Out
using the card
jumper of the program (Refer to the
Sound Card Manual).
<Jack of the PC sound card>
A4
Control Panel Functions
Front Panel Controls
Control
Function
Power Button
Use this button to turn the
Power
This Indicator
(DPMS)
display
on or
off.
Indicator
lights up green when the display
operates normally. If the display is in DPM (Energy
Saving) mode, this indicator color changes to amber.
MENU Button
Use this button to enter
or
exit the On Screen
Display.
Buttons
Use these buttons to choose
the On Screen
adjust
items in
Display.
SELECT/AUTO
Use this button to enter
Button
Display.
Control
or
a
selection in the On Screen
Direct Access Function
100
100
Bring
up Contrast and
Brightness adjustment.
VOLUME:
Use these buttons to decrease
A5
or
increase the volume level.
Control Panel Functions
Control
Direct Access Function
AUTO IMAGE ADJUSTMENT
When
your display settings, always press the
SELECT/AUTO button before entering the On Screen
adjusting
Display(OSD). This will automatically adjust your display image
to the ideal settings for the current screen resolution size
(display mode).
The best
display
mode is 1280x1024.
This feature lets you easily select the best desired image
condition optimized to the environment (ambient illumination,
image types etc.).
?
DAY
?
NIGHT
:
?
TEXT
For text
?
?
?
:
Bright
ambient illumination
Dark ambient illumination
images (Word processing etc.)
MOVIE : For animation images in videos or movies
PHOTO : For pictures or drawings
USER MODE : For use under user setup image
conditions (Brightness, contrast and color tint are
selected by the user in OSD Screen Setup Menu.)
:
MUTE
Used to select mute
(means sound on).
on
(means
sound
off)
and mute off
CONTROLS LOCKED/UNLOCKED
:
MENU and
This function allows you to secure the current control settings,
so that they cannot be inadvertently changed. Press and hold
the MENU button and
button for 3 seconds: the message
"CONTROLS LOCKED" appears.
You
unlock the OSD controls at any time
MENU button and
button for 3 seconds:
can
by pushing
the message "CONTROLS UNLOCKED" will appear.
A6
the
On Screen
Screen
Display (OSD) Control Adjustment
Adjustment
Making adjustments to the image size, position and operating parameters of
the display is quick and easy with the On Screen Display Control system. A
short example is given below to familiarize you with the use of the controls.
The following section is an outline of the available adjustments and selections
you can make using the OSD.
NOTE
Allow the
To make
display to
stabilize for at least 30 minutes before
adjustments
in the On Screen
Display, follow these steps:
Press the MENU Button, then the main
To
access a
becomes
control,
highlighted,
Use the
menu
of the OSD appears.
Buttons. When the icon you want
press the SELECT/AUTO Button.
use
the
making image adjustments.
or
Buttons to
adjust the item
to the desired level.
Accept the changes by pressing the SELECT/AUTO Button.
Exit the OSD
by Pressing the MENU Button.
A7
On Screen
Display(OSD)
Selection and
Adjustment
following table indicates all the On Screen Display control, adjustment,
and setting menus.
The
Main
menu
BRIGHTNESS
CONTRAST
COLOR
Sub
Reference
menu
BRIGHTNESS
To
adjust the brightness
contrast of the
CONTRAST
PRESET
9300K
and
screen
To customize the color of the
screen
6500K
R/G/B(User Color)
POSITION
TRACKING
AUDIO
V POSITION
To
H POSITION
screen
CLOCK
To
adjust the position
of the
PHASE
improve the clarity and
stability of the screen
VOLUME
To
adjust the audio function.
TREBLE
BASS
BALANCE
SETUP
LANGUAGE
To customize the
for
OSD POSITION
a
user's
screen
operating
FACTORY RESET
WHITE BALANCE
:
Adjustable
NOTE
The order of icons may differ
depending
on
A8
the model (A8~A10).
status
environment
On Screen
Display(OSD)
Selection and
Adjustment
procedure of selecting and adjusting an item
using the OSD system. Listed below are the icons, icon names, and icon
descriptions of the all items shown on the Menu.
You
were
introduced to the
NOTE
OSD (On Screen
To
Display)
menu
languages
adjust the brightness and
OSD
the monitor may differ from the manual.
on
contrast of the
Adjust
screen
Description
BRIGHTNESS
To
adjust
the
brightness
of the
screen.
CONTRAST
To
To customize the color of the
OSD
adjust
the contrast of the
screen.
screen
Adjust
Description
PRESET
9300K/6500K
Select the
?
9300K:
?
6500K:
color.
screen
Slightly
Slightly
bluish white.
reddish white.
RED
GREEN
Set your
own
color levels.
BLUE
To
adjust the position of the
OSD
screen
Adjust
Description
Vertical Position
To
move
image
up and down.
Horizontal Position
To
A9
move
image
left and
right.
On Screen
To
Display(OSD)
improve
OSD
To
the
Selection and
clarity
and
Adjustment
of the
stability
Adjust
screen
Description
CLOCK
To minimize any vertical bars or stripes visible
the screen background.The horizontal screen
size will also change.
PHASE
To adjust the focus of the display. This item
allows you to remove any horizontal noise and
clear or sharpen the image of characters.
adjust the audio function
OSD
Adjust
To customize the
OSD
Description
VOLUME
To decrease
TREBLE
To raises
or
lowers Treble level.
BASS
To raises
or
lowers Bass level.
BALANCE
To
screen
status for
or
adjust the
a
user's
Adjust
increase volume level.
balance level.
operating environment
Description
LANGUAGE
To choose the
names are
OSD POSITION
FACTORY
RESET
To
language
displayed.
adjust position
in which the control
of the OSD window
on
the
screen.
Return to all factory default settings except
"LANGUAGE".
If you don't want to reset the monitor, use the
button to select NO and then press the
SELECT/AUTO button.
WHITE
If the
output of the video card is different the
BALANCE
the color level may
deteriorate due to video signal distortion.
Using this function, the signal level is adjusted
to fit into the standard output level of the video
card in order to provide the optimal image.
Activate this function when white and black
colors are present in the screen.
required specifications,
For
example
If this does not improve the screen image, restore the factory default settings.
If necessary, perform the white balance function again. This function will be enabled
when the input signal is an analog signal.
A10
only
on
Troubleshooting
Check the
No
following before calling for service.
image
appears
Is the power cord of the
display connected?
Check and
Is the power indicator
light on?
Press the Power button.
Is the power on and the
power indicator green?
Adjust the brightness
Is the power indicator
amber?
If the
properly
the
if the power cord is connected
to the power outlet.
see
is in power
saving mode, try moving
or pressing any key on the keyboard
display
mouse
and the contrast.
up the screen.
Make sure if the power is
to
bring
Try to turn
on
on.
the PC.
Do you see an "INPUT
SIGNAL OUT OF
This message appears when the signal from the
PC (video card) is out of horizontal or vertical
RANGE" message
the screen?
frequency range of the display. See the
'Specifications' section of this manual and
configure your display again.
on
Doyouseea"NO
SIGNAL "message on
This message appears when the signal cable
between your PC and your display is not
the screen?
connected. Check the
Do you
see a
"CONTROLS LOCKED" message
Do you see
"CONTROLS LOCKED"
when you
button?
signal
push
MENU
You
can secure
on
try again.
the screen?
the current control
settings,
inadvertently
they cannot be
changed. You can unlock the OSD controls
at any time by pushing the MENU button
so
that
cable and
and
button for 3 seconds: the message
"CONTROLS UNLOCKED" will appear.
A11
Troubleshooting
Display image
Display
is incorrect
Position is
incorrect.
Press the SELECT/AUTO button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
Check Control Panel --> Display --> Settings and
see if the frequency or the resolution were changed.
If yes, readjust the video card to the recommend
resolution.
On the
screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
The
screen
mono or
color is
abnormal.
Press the SELECT/AUTO button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in the
on screen display.
Press the SELECT/AUTO button to
automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings and
adjust the display to the recommended resolution or
adjust the display image to the ideal setting. Set the
color setting higher than 24 bits (true color).
Check if the
signal cable is properly connected and
screwdriver to fasten if necessary.
Make sure the video card is properly inserted in the
use a
slot.
Set the color setting
at Control Panel
The
screen
blinks.
Check if the
-
screen
higher than 24 bits (true color)
Settings.
is set to interlace mode and if
yes, change it to the recommend resolution.
Make sure the power voltage is high enough, It has
to be
higher than AC100-240V 50/60Hz.
A12
Troubleshooting
Have you installed the
Have you installed the
display driver?
Do you
see an
"Unrecognized monitor,
Plug&Play (VESA DDC)
driver?
display
Be
sure
to install the
display driver from the
(or diskette) that comes with
display driver CD
your display. Or, you
can
driver from
our
Make
to check if the video card
sure
web site:
also download the
http://www.lge.com.
supports
Plug&Play function.
monitor found"
message?
Audio function
No sound.
Check if the audio cable is
correctly connected.
Check the volume level.
Sound is too
pitched
piched.
or
high
too low
Sound level is too low.
Adjust the TREBLE to an appropriate level.
Adjust the BASS to an appropriate level.
Check the volume level.
A13
Specifications
Display
17 inches (43.2cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
17 inches viewable
0.26 mm pixel pitch
Sync Input
Video
Input
Resolution
Horizontal
Freq.
Vertical Freq.
Input Form
30
Signal Input
Input Form
pin D-Sub Connector
RGB Analog (0.7Vp-p/75ohm)
Max
VESA 1280
VESA 1280
56
-
-
83kHz (Automatic)
75Hz (Automatic)
Separate TTL, Positive/Negative
Composite TTL Positive/Negative
SOG (Sync On Green)
15
Recommend
x
x
1024@75Hz
1024@60Hz
Plug&Play
DDC 2B
Audio
RMS Audio
Output 1W+1W(R+L)
0.7Vrms
Input Sensitivity
Speaker Impedance 16Ω
Power
Normal
:
Consumption
Stand-by/Suspend
≤
DPMS Off
≤3W
Dimensions
Width
&Weight
(with tilt stand)
Height
Depth
37.6
42.7
Range
Input
Environmental
Conditions
Tilt Stand
Signal
cable
Power cord
cm
-5˚~30˚
360˚
Tilt
Swivel
Power
3W
/ 14.80 inches
cm / 16.81 inches
22.4 cm / 8.82 inches
5.85 kg (12.90 lbs)
Net
Tilt
43W
AC 100-240V~50/60Hz 1.0A
Operating Conditions
Temperature 10˚C to 35 ˚C
10 % to 80 % non-Condensing
Humidity
Storage Conditions
Temperature -20˚C to 60 ˚C
5 % to 95 % non-Condensing
Humidity
Attached( O ), Detached (
Attached(
)
), Detached ( O )
Wall-outlet type
or
PC-outlet type
NOTE
Information in this document is
subject to change without
A14
notice.
Specifications
Preset Modes
(Resolution)
Display Modes (Resolution)
Horizontal
Freq. (kHz)
Vertical
Freq. (Hz)
1
VGA
640
x
350
31.469
70
2
VGA
720
x
400
31.468
70
3
VGA
640
x
480
31.469
60
4
VESA
640
x
480
37.500
75
5
VESA
800
x
600
37.879
60
6
VESA
800
x
600
46.875
75
7
MAC
832
x
624
49.725
75
8
VESA
1024
x
768
48.363
60
9
VESA
1024
x
768
60.123
75
10
MAC
1152
x
870
68.681
75
11
VESA
1152
x
900
61.805
65
12
VESA
1280
x
1024
63.981
60
13
VESA
1280
x
1024
79.976
75
Indicator
MODE
LED Color
Normal
green
Stand-by/Suspend
amber
DPMS Off
amber
A15
Specifications
VESA wall
mounting
Connected to another
object (stand
type and wall-mounted type. This
monitor accepts a VESA-compliant
mounting
interface
pad.- optional)
For further information, refer to the
VESA Wall Mounting Instruction Guide.
Kensington Security Slot- optional
Connected to a locking
cable that can be purchased
separately at most
computer
stores
A16
Digitally yours