advertisement
▼
Scroll to page 2
of 88
OWNER’S MANUAL MONITOR SIGNAGE Please read this manual carefully before operating the your set and retain it for future reference. MONITOR SIGNAGE MODELS 42WS50MW 42WX30MW 47WS50MW 47WX30MW 55WX30MW www.lg.com 2 TABLE OF CONTENTS ENGLISH ENG TABLE OF CONTENTS 4 LICENSES 24 ENTERTAINMENT 24 - Connecting to a wired network ASSEMBLING AND PREPARING 25 - Network Status 26 - Connecting USB storage devices 5 Accessories 27 - Browsing files 6 Optional Accessories 29 - Viewing movies 7 Parts and buttons 32 - Viewing photos 8 Using the Mounting Cable Tie 35 - Listening to music 8 Connecting the Speakers 37 - Viewing the Contents List 9 Connecting the stand 38 - DivX® VOD Guide 9 Using the IR Receiver 39 - Using PIP/PBP 10 Using the Kensington security system 10 Portrait Layout 41 CUSTOMIZING SETTINGS 11 Mounting on a wall 41 Accessing Main Menus 42 - PICTURE settings 45 - AUDIO settings 46 - TIME settings 47 - OPTION settings 52 - Picture ID 53 - NETWORK settings 5 13 REMOTE CONTROL 15 USING THE MONITOR 15 Connecting to a PC 16 - RGB connection 16 - DVI-D connection 54 MAKING CONNECTIONS 17 - HDMI connection 17 - Display Port connection 55 18 - IR Receiver connection 19 Adjusting the screen 19 - Selecting an image mode 19 - Customizing image options 20 - Customizing PC display options 20 Adjusting the sound 20 - Selecting an sound mode 21 - Customizing sound options 21 Using additional options 21 - Adjusting aspect ratio 23 - Using the input list Connecting to a HD receiver, DVD, Camcorder, Camera, Gaming Device or VCR player 55 - HDMI connection 55 - Component connection 56 - AV(CVBS) connection 56 Connecting to a USB 57 Connecting to the LAN 58 Daisy Chain Monitors TABLE OF CONTENTS 62 SPECIFICATIONS 71 IR CODES 72 CONTROLLING THE MULTIPLE PRODUCT 72 Connecting the cable 72 RS-232C Configurations 72 Communication Parameter 73 Command reference list 75 Transmission / Receiving protocol ENG ENGLISH 59 TROUBLESHOOTING 3 4 LICENSES ENGLISH LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play purchased DivX Videoon-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified to play DivX video up to HD 1080p, including premium content. DivX , DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274 Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. ASSEMBLING AND PREPARING 5 Accessories Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. POWER ENERGY MONITOR INPUT OFF ON .,! GHI PQRS 1/a/A SAVING TUV -*# CLEAR ABC JKL DEF MNO WXYZ MARK ARC PSM P BRIGHT A NESS G E MUTE MENU AUTO BACK TILE S.MENU OK EXIT ID ON OFF Remote control and Batteries Power Cord CD(Owner's Manual, SuperSign Program/ Manual) Card D-sub 15 pin signal cable IR Receiver Mounting Cable Tie CAUTION Do not use any unapproved or counterfeit parts or accessories to ensure the safety and product life yy span. Any damages or injuries by using pirated items are not covered by the warranty. yy NOTE The accessories supplied with your product may vary depending on the model. yy Product specifications or contents in this manual may be changed without prior notice due to upgrade yy of product functions. ENG ENGLISH ASSEMBLING AND PREPARING 6 ASSEMBLING AND PREPARING Optional Accessories ENGLISH ENG Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. ST-200T Stand SP-2000 Speaker Cable holder/ Cable Tie Screws Screws Diameter 4.0 mm x Pitch 0.7 mm x Length 10 mm(Included Spring Washer) Diameter 4.0 mm x Pitch 0.7 mm x Length 8 mm(Included Spring Washer) Stand kit Speaker kit NOTE Cable holder/Cable tie may not be available in some areas or for some models. yy Optional accessories are not included for all models. yy ASSEMBLING AND PREPARING 7 Parts and buttons ENG ENGLISH Screen Buttons/ Screen Marks Connection panel Screen Marks Description INPUT Changes the input source. MENU Accesses the main menus, or saves your input and exits the menus. Adjust the up and down. Adjusts the volume level. AUTO/SET /I Displays the current signal and mode. Press this button to adjust the screen automatically (available only in RGB mode) Turns the power on or off. 8 ASSEMBLING AND PREPARING ENGLISH ENG Using the Mounting Cable Tie Connecting the Speakers First, connect the input signal cable to be used. Insert the cable tie into the bottom hole on the back as shown in the figure to organize cables. 1 Connect an input signal cable to use before - Only on some models. installing the speakers. 2 Mount the speaker by using a screw as shown in the following. Then connect the speaker cable. 3 After installing your speakers, use holders and cable ties to organize the speaker cables. ASSEMBLING AND PREPARING Connecting the stand 9 Using the IR Receiver 1 Place a soft cloth on the table and put the product with the screen facing downward. Connect the stand as shown in the following picture. This allows a remote control sensor to be placed in a custom location. Then that display can control other displays via an RS-232C cable. Install the IR receiver towards the front of the set. 2 Use the screws to secure the stand on the rear side of the product as shown in the diagram. IR Receiver cable NOTE When you see from the back of the set, if yy the IR receiver cable does not face front, the signal reception range may shorten. The IR receiver is made with a magnet.It is yy detachable at the bottom (typical installation) or back (wall installation) of the set. ENG ENGLISH - Only on some models. 10 ASSEMBLING AND PREPARING ENGLISH ENG Using the Kensington security system The Kensington security system connector is located at the back of the Monitor. For more information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . Connect the Kensington security system cable between the Monitor and a table. NOTE The Kensington security system is optional. yy You can obtain additional accessories from most electronics stores. Portrait Layout To install in portrait mode, rotate the set counterclockwise 90 degrees when looking at from the front. ASSEMBLING AND PREPARING Mounting on a wall CAUTION 10 cm 10 cm 10 cm Disconnect the power before installing or yy moving the monitor. Otherwise electric shock may occur. If you install the Monitor on a ceiling or yy slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. Do not over tighten the screws as this may yy cause damage to the Monitor and void your warranty. Use screws and wall mounts that meet the yy VESA standard. Any damages or injuries by misuse or using an improper accessory are not covered by the warranty. 10 cm NOTE If you intend to mount the Monitor to a wall, attach Wall mounting interface (optional parts) to the back of the set. When you install the Monitor using the wall mounting interface (optional parts), attach it carefully so it will not fall. 1 Please, Use the screw and wall mount interface in accordance with VESA Standards. 2 If you use screw longer than standard, the monitor might be damaged internally. 3 If you use improper screw, the product might be damaged and drop from mounted position. In this case, LG Electronics is not responsible for it. 4 VESA compatible. 5 Please use VESA standard as below. 785mm(31 inch) or greater yy * Fastening screw: Diameter 6.0 mm x Pitch 1.0 mm x Length 10 mm Use screws that are listed on the VESA yy standard screw specifications. The wall mount kit includes an installation yy manual and necessary parts. The wall mount bracket is optional. You can yy obtain additional accessories from your local dealer. The length of screws may differ depending yy on the wall mount. Be sure to use the proper length. For more information, refer to the instructions yy supplied with the wall mount. ENG ENGLISH For proper ventilation, allow a clearance of 10 cm on each side and from the wall. Detailed installation instructions are available from your dealer, see the optional Tilt Wall Mounting Bracket Installation and Setup Guide. 10 cm 11 12 ASSEMBLING AND PREPARING Securing the product to a wall (optional) ENGLISH ENG (Depending on model) 1 Insert and tighten the eye-bolts, or product brackets and bolts on the back of the product. -If there are bolts inserted at the eye-bolts position, remove the bolts first. 2 Mount the wall brackets with the bolts to the wall. Match the location of the wall bracket and the eye-bolts on the rear of the product. 3 Connect the eye-bolts and wall brackets tightly with a sturdy rope. Make sure to keep the rope horizontal with the flat surface. CAUTION Make sure that children do not climb on or yy hang on the product. NOTE Use a platform or cabinet that is strong and yy large enough to support the product securely. Brackets, bolts and ropes are optional. You yy can obtain additional accessories from your local dealer. WARNING If a product is not positioned in a sufficiently yy stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as: » » Using cabinets or stands recommended by the manufacturer of the product. » » Only using furniture that can safely support the product. » » Ensuring the product is not overhanging the edge of the supporting furniture. » » Not placing the product on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the product to a suitable support. » » Not standing the product on cloth or other materials placed between the product and supporting furniture. » » Educating children about the dangers of climbing on furniture to reach the product or its controls. REMOTE CONTROL 13 The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the Monitor correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this yy may damage the remote control. Make sure to point the remote control at the yy remote control sensor on the Monitor. (POWER) ENERGY SAVING Adjusts the brightness of the screen to reduce energy consumption. Turns the Monitor on or off. MONITOR ON / OFF Turn off the monitor and then turn it back on. POWER ARC Selects the Aspect Ratio Mode. MARK Selects a specific file in the USB mode. .,! GHI PQRS 1/a/A SAVING TUV -*# CLEAR ABC JKL Number and Alphabet buttons Enters numerical or alphabetical characters depending on the setting. DEF MNO WXYZ CLEAR Deletes the entered numerical or alphabetical character. MARK ARC Volume Up / Down Adjusts the volume level. PSM Selects the Picture Status Mode. INPUT Selects the input mode. INPUT OFF ON 1/a/A Button Toggles between numerical and alphabetical. ENERGY MONITOR PSM P BRIGHT A NESS G E MUTE MENU AUTO MUTE Mutes all sounds. OK S.MENU BRIGHTNESS Key Adjust the brightness by pressing the Up and Down buttons on the remote control. In USB mode, the OSD menu has the Page function to move to the next file list. ENG ENGLISH REMOTE CONTROL 14 REMOTE CONTROL ENGLISH ENG POWER ENERGY MONITOR MENU (See p.41) Accesses the main menus or saves your input and exit menus. INPUT OFF ON .,! GHI PQRS 1/a/A SAVING TUV -*# CLEAR ABC JKL DEF MNO WXYZ MARK ARC Navigation buttons Scrolls through menus or options. PSM OK Selects menus or options and confirms your input. AUTO S.MENU S.MENU (SuperSign Menu Key) The current model does not support this function. OK BACK TILE ID ON ID ON/OFF When more than one monitor is present in the same room, this allows you to control them individually. E MUTE MENU BACK Allows the user to move back one step. P BRIGHT A NESS G AUTO Automatically adjusts picture position and minimizes image instability.(RGB input only) OFF EXIT EXIT Clears all on-screen displays and returns to Monitor viewing from any menu. TILE Selects the TILE Mode. USB Menu control buttons Controls media playback. USING THE MONITOR 15 Connecting to a PC Your Monitor supports the Plug & Play* feature. * Plug & Play: This is the function that allows a PC to use the monitor without installing a driver. ENG ENGLISH USING THE MONITOR CAUTION Connect the yy signal input cable and tighten it by turning the screws clockwise. Do not press the screen with your finger for yy a long time as this may result in temporary distortion on the screen. Avoid displaying a fixed image on the screen yy for a long period of time to prevent image burn. Use a screensaver if possible. NOTE It is recommended to use the Monitor with yy the HDMI connection for the best image quality. Use a shielded signal interface cable, such yy as D-sub 15 pin signal cable and DVI cable, with a ferrite core to maintain standard compliance for the product. If you turn the Monitor on when the set yy becomes cold, the screen may flicker. This is normal. Some red, green, or blue spots may appear yy on the screen. This is normal. 16 USING THE MONITOR ENGLISH ENG RGB connection DVI-D connection Transmits the analog video signal from your PC to the Monitor. Connect the PC and the Monitor set with the 15 pin signal cable as shown the following illustrations. Select RGB input source on the monitor. Transmits the digital video signal from your PC to the Monitor. Connect the PC and the Monitor set with the DVI cable as shown the following illustrations. Select DVI-D input source on the monitor. Macintosh Adapter (not included) (not included) (not included) (not included) DVI OUT AUDIO OUT RGB OUT PC/ MAC NOTE Use the standard yy Macintosh adapter since an incompatible adapter is available in the market. (Different signaling system) Apple computers may require an adapter to yy connect to this monitor. Call or visit their web site for more information. AUDIO OUT USING THE MONITOR 17 Display Port connection Transmits the digital video and audio signals from your PC to the Monitor. Connect the PC and the Monitor with the HDMI cable as shown in the following illustrations. Select HDMI input source. Transmits the digital video and audio signals from your PC to the Monitor. Connect the PC and the Monitor with the Display Port cable as shown in the following illustrations. Select Display Port input source. (not included) HDMI (not included) DP OUT NOTE Use a High Speed HDMI™ Cable. yy Please check the PC environment if you yy cannot hear the sound in HDMI mode. Some PCs require you to manually change the default audio output to HDMI. If you want to use HDMI PC mode, you must yy set PC/DTV to PC mode. When HDMI PC is used, a compatiblity yy problem might occur. ENG ENGLISH HDMI connection 18 USING THE MONITOR IR Receiver connection ENGLISH ENG Allows the use of a wired remote or IR receiver extension. NOTE Make sure the power cable is disconnected. yy USING THE MONITOR Customizing image options Selecting an image mode Customize basic and advanced options of each image mode for the best screen performance. Display images in its optimized settings by selecting one of the preset image modes. 1 Press MENU to access the main menus. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to PICTURE and press OK. 3 Press the Navigation buttons to scroll to Picture Mode and press OK. 4 Press the Navigation buttons to scroll to an image mode you want and press OK. Mode Vivid 2 Press the Navigation buttons to scroll to PICTURE and press OK. 3 Press the Navigation buttons to scroll to Picture Mode and press OK. 4 Press the Navigation buttons to scroll to an image mode you want and press OK. 5 Select and adjust the following options, and then press OK. Description Adjusts the video image for the retail environment by enhancing the contrast, brightness, color, and sharpness. Standard Adjusts the image for a normal environment. Cinema Optimizes the video image for a cinematic look to enjoy movies as if you are in a movie theater. Sport Optimizes the video image for high and dynamic actions by emphasizing primary colors such as white, grass, or sky blue. Game Optimizes the video image for a fast gaming screen such as PCs or games. 5 When you are finished, press EXIT. When you return to the previous menu, press BACK. Option Description Backlight djusts the brightness of the screen A by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss. Contrast Increases or decreases the gradient of the video signal. You may use Contrast when the bright parts of the picture are saturated. Brightness Adjusts the base level of the signal in the picture. You may use Brightness when the dark areas of the picture are saturated. Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Color Adjusts intensity of all colors. Tint Adjusts the balance between red and green levels. Color Temp. Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish. Advanced Customizes the advanced options. Refer to the Advanced image options. (See p.44) Control Picture Reset Restores the options to the default setting. 6 When you are finished, press EXIT. When you return to the previous menu, press BACK. ENG ENGLISH Adjusting the screen 19 20 USING THE MONITOR ENGLISH ENG Customizing PC display options Adjusting the sound Customize options of each image mode for the best image quality. This function works in the following mode: yy RGB[PC] mode. Selecting an sound mode 1 Press MENU to access the main menus. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to 2 Press the Navigation buttons to scroll to 3 Press the Navigation buttons to scroll to 3 Press the Navigation buttons to scroll to Sound 4 Select and adjust following options, and then 4 Press the Navigation buttons to scroll to a PICTURE and press OK. Screen and press OK. press OK. Option Description This Monitor has 5 preset sound modes to compliment different types of video content. AUDIO and press OK. Mode and press OK. sound mode you want and press OK. Mode Description Resolution Selects a proper resolution. See “Customizing PC display options”. Standard Select when you want standard-quality sound. Auto Adjusts the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is in progress. Music Select when you listen to music. Cinema Select when you watch movies. Sport Select when you watch sport events. Game Selects when you play games. Config. Position/ Adjusts the options when the picture is Size/Phase not clear, especially when characters are shaky. Run Auto Config. before adjusting these. Reset Restores the options to the default setting. 5 When you are finished, press EXIT. When you return to the previous menu, press BACK. 5 When you are finished, press EXIT. When you return to the previous menu, press BACK. USING THE MONITOR 21 Using additional options You may customize options of each sound mode for the best sound quality. Adjusting aspect ratio 1 Press MENU to access the main menus. Resize the image to view the image at its optimal size by pressing ARC while you are watching content. 2 Press the Navigation buttons to scroll to AUDIO and press OK. 3 Press the Navigation buttons to scroll to Sound Mode and press OK. 4 Press the Navigation buttons to scroll to a sound mode you want and press OK. 5 Select and adjust following options, and then press OK. Option Description Infinite Sound LG's Infinity Sound option provides 5.1 channel stereo quality sound from two speakers. Treble Increases the intensity of the high frequency part of audio. Bass Increases the intensity of the low frequency part of audio. Reset Resets the sound mode to the default setting. CAUTION If a fixed image displays on the screen for a yy long period of time, it will be imprinted and become a permanent disfigurement on the screen. This is “image burn” or “burn-in” and not covered by the warranty. If the aspect ratio is set to 4:3 for a long yy period of time, image burn may occur on the letterboxed area of the screen. NOTE You can also change the image size by yy accessing the main menus. The Just Scan mode operates when a video yy signal has resolution of 720p or higher. 6 When you are finished, press EXIT. When you return to the previous menu, press BACK. MODE AV ARC 16:9 Just Scan 1:1 4:3 Zoom Cinema Zoom 1 Component RGB Display DVI-D HDMI Port PC DTV PC DTV PC DTV PC o x o o o x o o o x o o o x o o o x x o o o x o o o o o x x x o o o o o x x x o o o o o x x x o o o o o x x ENG ENGLISH Customizing sound options 22 USING THE MONITOR ENGLISH ENG - 16:9 : This selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire screen(useful for viewing 4:3 formatted DVDs). - 4:3 : This selection will allow you to view a picture with an original 4:3 aspect ratio, black bars will appear on both the left and right of the screen. - Just Scan : This Selection will allow you view the picture of best quality without loss of original picture in high resolution image. Note: If there is noise in original Picture, You can see the noise at the edge. - Zoom : This selection will allow you to view the picture without any alteration, while filling the entire screen. However, the top and bottom of the picture will be cropped. Just Scan - 1:1 : The aspect ratio is not adjusted from the original. (Only Display Port PC, HDMI PC, DVI-D PC, RGB PC) - Cinema Zoom 1 : Choose Cinema Zoom when you want to enlarge the picture in correct proportion. Note: When enlarging or reducing the picture, the image may become distorted. USING THE MONITOR 23 Using the input list 1 Press INPUT to access the input source list. -The connected device displays on each input source. 2 Press the Navigation buttons to scroll to one of the input sources and press OK. Input source Description AV(CVBS) Watch video from a VCR or other external devices. Component Watch content from a DVD or other external devices, or through a digital set-top box RGB Views the connected PC display on the screen. Display Port Watch content from a PC, DVD of Digital set-top box other high definition devices DVI-D Views the connected PC display on the screen. HDMI Watch content from a PC, DVD of Digital set-top box other high definition devices USB Plays the multimedia file saved in the USB. ENG ENGLISH Selecting an input source 24 ENTERTAINMENT ENGLISH ENG ENTERTAINMENT Connecting to a wired network (Depending on model) 1 Press MENU to access the main menus. Connect the display to a local area network (LAN) via the LAN port as shown on the following illustration and set up the network settings. This monitor only supports a wired network connection. After making a physical connection, a small number of home networks may require the display network settings to be adjusted. For most home networks, the display will connect to automatically without any adjustments. For detail information, contact your internet provider or router manual. LAN Router @ Internet Internet To set up the network seetings: (Even if your display has already connected automatically, running setup again will not harm anything), LAN WAN 2 Press the Navigation buttons to scroll to NETWORK and press OK. 3 Press the Navigation buttons to select Network Setting and press OK. 4 If you already set Network Setting, select Resetting. The new connection settings resets the current network settings. 5 Select IP Auto Setting or IP Manual Setting. -If selecting IP Manual Setting, press the Navigation and Number buttons. IP addresses will need to be input manually. -IP Auto Setting: Select this if there is a DHCP server (Router) on the local area network (LAN) via wired connection, the display will automatically be allocated an IP address. If you’re using a broadband router or broadband modem that has a DHCP (Dynamic Host Configuration Protocol) server function. The IP address will automatically be determined. 6 When you are finished, press EXIT. ETHERNET Cable modem CAUTION yy Do not connect a modular phone cable to the LAN port. yy Since there are various connection methods, please follow the specifications of your telecommunication carrier or internet service provider. CAUTION yy Network setting menu will not be available until the display is connected to physical network. yy Since there are various connection methods, please follow the specifications of your telecommunication carrier or internet service provider. ENTERTAINMENT NOTE Tips for Network setting yy Use a standard LAN cable with this display. Cat5 or better with a RJ45 connector. yy Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again. yy Depending on the internet service provider (ISP), the number of devices that can receive internet service may be limited by the applicable terms of service. For details, contact your ISP. yy LG is not responsible for any malfunction of the display and/or the internet connection feature due to communication errors/malfunctions associated with your internet connection, or other connected equipment. yy LG is not responsible for problems within your internet connection. yy You may experience undesired results if the network connection speed does not meet the requirements of the content being accessed. yy Some internet connection operations may not be possible due to certain restrictions set by the Internet service provider (ISP) supplying your Internet connection. yy Any fees charged by an ISP including, without limitation, connection charges are your responsibility. yy A 10 Base-T or 100 Base-TX LAN port is required when using a wired connection to this display. If your internet service does not allow for such a connection, you will not be able to connect the display. yy A DSL modem is required to use DSL service and a cable modem is required to use cable modem service. Depending on the access method of and subscriber agreement with your ISP, you may not be able to use the internet connection feature contained in this display or you may be limited to the number of devices you can connect at the same time. (If your ISP limits sub-scription to one device, this display may not be allowed to connect when a PC is already connected.) yy The use of a “Router” may not be allowed or its usage may be limited depending on the policies and restrictions of your ISP. For details, contact your ISP directly. Network Status 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to NETWORK and press OK. 3 Press the Navigation buttons to select Network Status. 4 Press OK to check the network status. 5 When you are finished, press EXIT. Option Setting Test Close Description Return to the network setting menu. Test the current network status after setting the network. Return to the previous menu. ENG ENGLISH yy If you want to access the Internet directly on your display, the internet connection should always be on. yy If you cannot access the Internet, check the network conditions from a PC on your network. yy When you use Network Setting, check the LAN cable or check if DHCP in the router is turned on. yy If you do not complete the network settings, the network may not work properly. 25 26 ENTERTAINMENT Connecting USB storage devices ENGLISH ENG You can connect USB storage devices such as a USB flash memory, external hard drive to the display and use multimedia features . Connect a USB flash memory or USB memory card reader to the Display as shown on the following illustration. The My media screen appears. or CAUTION yy Do not turn the display off or remove a USB storage device while the EMF(my media) Menu is activated, as this could result in loss of files or damage to the USB storage device. yy Back up your files saved on a USB storage device frequently, as you may lose or damage the files and this may be not covered by the warranty. Tips for using USB storage devices yy Only a USB storage device is recognizable. yy If the USB storage device is connected through a USB hub, the device is not recognizable. yy A USB storage device using an automatic recognition programme may not be recognized. yy A USB storage device which uses its own driver may not be recognized. yy The recognition speed of a USB storage device may depend on each device. yy Please do not turn off the display or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. yy Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files, image files or movie files. yy Please use only a USB storage device which was formatted as a FAT32 file system or NTFS file system provided with the Windows operating system. In case of a storage device formatted as a different utility program which is not supported by Windows, it may not be recognized. yy Please connect power to a USB storage device(over 0.5 A) which requires an external power supply. If not, the device may not be recognized. yy Please connect a USB storage device with the cable offered by the device maker. yy Some USB storage devices may not be supported or operated smoothly. yy File alignment method of USB storage device is similar to Window XP and filename can recognize up to 100 English characters. yy Be sure to back up important files since data stored in a USB memory device may be damaged. We will not be responsible for any data loss. 27 ENTERTAINMENT yy It is recommended to use a certified USB storage device and cable. Otherwise, a USB storage device may not be detected or a playback error may occur. yy Only a USB memory stick can be used to play back the files distributed and stored by SuperSign Manager. A USB hard disk or multi-card reader will not work. yy Only an FAT 32 file formatted storage device can play back the files distributed and stored by SuperSign manager. yy A USB 3.0 storage device may not work. Browsing files Access the photo, music, or movie lists and browse files. 1 Connect a USB storage device. 2 Press MENU to access the main menus. 3 Press the Navigation buttons to scroll to My Media and press OK. 4 Press the Navigation buttons to choose from Movie List, Photo List, Music List or Contents List and press OK. Movie List Photo List Music List 2 1 Page 1/1 Photo List USB External 001 002 010 011 Drive1 Page 1/1 003 004 005 006 012 013 014 015 Move To Music List Contents List View Change Numbers 007 008 Page Change Mark Mode 009 4 5 Mark Exit 3 No. Description 1 Moves to upper level folder 2 Current page/Total pages Corresponding buttons on the remote control Current page/ total pages of contents under the folder 4 focused on 1 Contents under the folder 5 focused on 1 Button Description Repeatedly, press the GREEN button to Green converted to Movie List->Photo List, Photo button List->Music List, Music List->Contents List or Contents List->Movie List. Yellow A method to view in 5 large thumbnail button or simple list. Blue Convert to Mark Mode. button 3 ENG ENGLISH yy If the USB HDD does not have an external power source, the USB device may not be detected. So be sure to connect the external power source. - Please use a power adaptor for an external power source. We do not guarantee an USB cable for an external power source. yy If your USB memory device has multiple partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB memory devices. yy If a USB memory device is connected to a USB multi-card reader, its volume data may not be detected. yy If the USB memory device does not work properly, disconnect and reconnect it. yy How fast a USB memory device is detected differs from device to device. yy If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the display is turned on. yy The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB memory. yy Any device with more than the recommended capacity may not work properly. yy If a USB external hard disk with a “Energy Saving” function does not work, turn the hard disk off and on again to make it work properly. yy USB storage devices below USB 2.0 are supported as well. But they may not work properly in the movie list. yy Maximum of 999 folders or files can be recognized under one folder. 28 ENTERTAINMENT Supported File Formats ENGLISH ENG File Extensions Photo JPEG Type Movie Supported file format DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T RP,TP,ASF,WMV,FLV) JPG PNG BMP Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*. mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*. avi(motion-jpeg)/*. mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting file Video format : DivX3.11, DivX4, DivX5, DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10 beta-1/beta-2, Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1, JPEG, Sorenson H.263 Audio format : Dolby Digital, AAC, Mpeg, MP3, LPCM, HE-AAC, ADPCM, WMA Bit rate : within 32 kbps to 320 kbps(MP3) External Subtitle format : *.smi/*.srt/*.sub (MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*. txt(TMPlayer)/*.psb(PowerDivX) Photo Internal Subtitle format : only, XSUB (It is the subtitle format used in DivX6 files) JPEG Music Baseline : 64 x 64 to 15360 x 8640 Progressive : 64 x 64 to 1920 x 1440 y y You can play JPEG files only. y y Non-supported files are displayed in the form of predefined icon. MP3 Bit rate 32 to 320 y y Sampling rate MPEG1 Layer3 : 32 kHz, 44.1 kHz, 48 kHz y y Sampling rate MPEG2 Layer3 : 16 kHz, 22.05 kHz, 24 kHz y y Sampling rate MPEG2.5 Layer3 : 8 kHz, 11.025 kHz, 12 kHz File Extensions : *.cts/ *.cse Content (when Movie using File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*. SuperSign trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.avi/*.asf/*. Manager) wmv/*.avi(motion JPEG)/*.mp4(motion JPEG)/*. mkv(motion JPEG) Video format: MPEG1, MPEG2, MPEG4,H.264/ AVC, DivX3.11, DivX4, DivX5, DivX6, Xvid 1.00,Xvid 1.01, Xvid 1.02, Xvid 1.03, Xwvid 1.10-beta1/2, JPEG, VC1(WVC1/WMV3) Audio format: MP2,MP3,Dolby Digital, LPCM, AAC, HE-AAC,LPCM, ADPCM, WMA, MP3 Item Profile supported y y SOF0: file format baseline y y SOF1: Extend Sequential y y SOF2: Progressive Photo size y y Min: 64 x 64 y y Max Type: 1366 x 768 Music MP3 Bit rate Sampling rate 32 kbps to 320 kbps 32 kHz, 44.1 kHz, 48 kHz (MPEG1 L3) 16 kHz, 22.05 kHz, 24 kHz (MPEG2 L3) 8kHz, 11.025 kHz, 12 kHz (MPEG2.5 L3) ENTERTAINMENT Viewing movies 29 5 Play a movie. 1 Press the Navigation buttons to scroll to My Media and press OK. NOTE yy Non-supported files are displayed the preview image by icon only . yy Abnormal files are displayed in the form of bitmap . 2 Press the Navigation buttons to scroll to Movie List and press OK. 3 Press the Navigation buttons to scroll to a folder you want and press OK. 6 Control playback by using the following buttons. 4 Press the Navigation buttons to scroll to a file you want and press OK. 01:02:30 / 02:30:25 Option Hide Exit Page 1/1 Movie List Drive1 USB1 USB Drive 001 002 005 006 Page 1/1 003 004 Button Description Stops the playback Plays a video Move To Photo list Change Numbers Play Page Change Pauses or resumes the playback Mark Scans backward in a file Exit Mark Mode Scans forward in a file Page 1/1 Movie List Mark Mode Show the Option menu. Drive1 USB1 USB Drive 001 002 005 006 Hide the menu on the full-sized screen. Page 1/1 003 Return to Movie List. 004 051. Apple_ ...... 02:30:25 or Move Play Marked Mark All Unmark All Mark Page Change Exit Mark Mode Mark Exit Menu Play Marked Description Play the selected movie file. Once a movie file finishes playing, the next selected one will be played automatically. Mark All Mark all movie files on the screen. Unmark All Deselect all marked movie files. Exit Mark Mode Exit the Mark Mode. ENERGY SAVING Skips to specific points in a file during playback. The time of a specific point will appear on the status bar. In some files, this function may not work properly. Press the ENERGY SAVING button repeatedly to increase the brightness of your screen. ENG ENGLISH Play video files on display. Your display shows all of the video files saved in a USB storage device or shared folder on a PC. 30 ENTERTAINMENT Tips for using playing video files ENGLISH ENG yy Some user-created subtitles may not work properly. yy Some special characters are not supported in subtitles. yy HTML tags are not supported in subtitles. yy Subtitles in languages other than the supported languages are not available. yy The screen may suffer temporary interruptions (image stoppage, faster playback, etc.) when the audio language is changed. yy A damaged movie file may not be played correctly, or some player functions may not be usable. yy Movie files produced with some encoders may not be played correctly. yy If the video and audio structure of recorded file is not interleaved, either video or audio is outputted. yy HD videos with a maximum of 1920x1080@25/30P or 1280x720@50/60P are supported, depending on the frame. yy Videos with resolutions higher than 1920X1080@25/30P or 1280x720@50/60P may not work properly depending on the frame. yy Movie files other than the specified types and formats may not work properly. yy Max bitrate of playable movie file is 20 Mbps. (only, Motion JPEG : 10 Mbps) yy We do not guarantee smooth playback of profiles encoded level 4.1 or higher in H.264/ AVC. yy DTS Audio codec is not supported. yy A movie file more than 30 GB in file size is not supported for playback. yy A DivX movie file and its subtitle file must be located in the same folder. yy A video file name and its subtitle file name must be identical for it to be displayed. yy Playing a video via a USB connection that doesn’t support high speed may not work properly. yy Files encoded with GMC(Global Motion Compensation) may not be played. When you are watching the movie by Movie yy List function, you can adjust an image by Energy Saving key on the remote control. User setup for each image mode does not operate. Video options 1 Press MENU to access the Pop-Up menus. 2 Press the Navigation buttons to scroll to Set Video Play., Set Video. or Set Audio. and press OK. NOTE yy Option values changed in Movie List does not affect Photo List and Music List. yy Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List. yy When replaying the video file after stopping, you can play from where it stopped previously. ENTERTAINMENT When you select the Set Video Play, the Picture Size, Audio Language, Subtitle Language or Repeat. 2 Press the Navigation buttons to scroll to make appropriate adjustments. Latin2 Latin4 Cyrillic Menu Picture Size Audio Language Subtitle Language Language Code Page Sync Position Size Repeat Description Selects your desired picture format during movie play. Changes the Language Group of the audio during movie play. Files with a single audio track cannot be selected. Turn on/off the subtitle. Activated for SMI subtitle and can select the language within the subtitle. Can select the font for subtitle. When set to default, same font as general menu will be used. Adjusts the time synchronisation of the subtitle from -10 secs to +10 secs by steps of 0.5 secs during movie play. Changes the position of the subtitle either up or down during movie play. Selects your desired Subtitle size during movie play. Turn on/off repeat function of movie playback. When turned on, the file within the folder will be played back repeatedly. Even when the repeated playback is turned off, it can run the playback if the file name is similar to the previous file. Greek Korean Support Language English, Spanish, French, German, Italian, Swedish, Finnish, Dutch, Portuguese, Danish, Romanian, Norwegian, Albanian, Gaelic, Welsh, Irish, Catalan,Valencian Bosnian, Polish, Croatian, Czech, Slovak, Slovenian, Serbian, Hungarian Estonian, Latvian, Lithuanian Bulgarian, Macedonian, Russian, Ukrainian, Kazakh Greek Korean NOTE yy Only 10,000 of sync blocks can be supported within the subtitle file. yy When playing a video, you can adjust the Picture Size by pressing the ARC button. yy Subtitles in your language are only supported when the OSD menu is also in this language. yy The code page options may be disabled depending on the language of the subtitle files. yy Select the appropriate code page for the subtitle files. ENG ENGLISH 1 Press the Navigation buttons to scroll to show Code Page Latin1 31 32 ENTERTAINMENT When you select the Set Video, ENGLISH ENG 1 Press the Navigation buttons to scroll to make appropriate adjustments. Page 1/1 Photo List USB1 USB Drive 001 Drive1 002 010 011 Page 1/1 003 004 005 006 012 013 014 015 When you select the Set Audio, Move View Change Numbers To Music List 008 009 Page Change Mark Exit Mark Mode 1 Press the Navigation buttons to scroll to show the Sound Mode, Clear Voice II or Balance. 007 Page 1/1 Photo List Mark Mode USB1 USB Drive Drive1 Page 1/1 2 Press the Navigation buttons to scroll to make appropriate adjustments. 001 010 002 011 003 004 005 006 012 013 014 015 Move Viewing photos View Marked Mark All 007 Mark Unmark All 008 009 Page Change Exit Mark Mode Mark Exit View image files saved in a USB storage device. The displays on the screen may differ from the model. View Marked Display the selected photo file. 1 Press the Navigation buttons to scroll to My Mark All Mark all photo files on the screen. Unmark All Deselect all marked photo files. Media and press OK. 2 Press the Navigation buttons to scroll to Photo List and press OK. 3 Press the Navigation buttons to scroll to a folder you want and press OK. 4 Press the Navigation buttons to scroll to a file you want and press OK. Menu Description Exit Mark Mode Exit the Mark Mode. 5 View photos. NOTE yy Non-supported files are displayed the preview image by icon only . yy Abnormal files are displayed in the form of bitmap . ENTERTAINMENT Using photo options ENERGY SAVING Press the ENERGY SAVING button repeatedly to change the brightness of your screen. y y Slide Speed: Selects a slideshow speed (Fast, Medium, Slow). y y TransitionEffect: Set the view mode of the slideshow. y y BGM: Selects a music folder for the background music. NOTE y yYou cannot change the music folder while the background music is playing. y yYou can only select the MP3 folder saved on the device that currently displays the photo. 2/13 Slideshow Options Option BGM Hide Exit Number of selected photos Hides the option window. To display the options, press OK. Return to Photo List. Option Slideshow BGM Description Starts or stops a slideshow with selected photos. If there are no selected photos, all photos saved in the current folder display during a slideshow. To set a slideshow speed, select Option. Turns the background music on or off. To set the background music folder, select Option. You can adjust Option by MENU button on the remote control. Rotates photos clockwise (90°, 180°, 270°, 360°). Photo options 1 Press MENU to show the Option menus. 2 Press the Navigation buttons to scroll to Set Photo View., Set Video. or Set Audio. and press OK. NOTE y yThe supported photo size is limited. You cannot rotate a photo if the resolution of the rotated width is larger than the supported resolution size. View the photo by zoom in 2, 4 times. NOTE y yPhotos with a resolution of 960x540 or less cannot be enlarged. NOTE yy Option values changed in Movie List does not affect Photo List and Music List. yy Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List. ENG ENGLISH Use the following options while viewing photos. 33 34 ENTERTAINMENT When you select the Set Photo View, ENGLISH ENG 1 Press the Navigation buttons to scroll to select Slide Speed,Transition Effect or BGM. 2 Press the Navigation buttons to scroll to make appropriate adjustments. Transition Effect Option Option Description Sliding Pushes the current slide out of view as it plays to the next slide. Stairs Pushes the current slide in a staircase shape as it plays to the next slide. Door Open /Close Pushes the current slide like opening or closing the door as it plays to the next slide. Shutter Pushes the current slide like drawing or pulling down the blind as it plays to the next slide Fade In Fades the slide out slowly before playing to the next slide. ENTERTAINMENT When you select the Set Video, 35 Listening to music appropriate adjustments. 1 Press the Navigation buttons to scroll to My Media and press OK. 2 Press the Navigation buttons to scroll to Music When you select the Set Audio, 1 Press the Navigation buttons to scroll to show the Sound Mode, Clear Voice II or Balance. 2 Press the Navigation buttons to scroll to make appropriate adjustments. List and press OK. 3 Press the Navigation buttons to scroll to a folder you want and press OK. 4 Press the Navigation buttons to scroll to a file you want and press OK. Page 1/1 Music List USB1 USB Drive Drive1 001. - B01.mp3 00:00 Page 1/1 002. -B02.mp3 00:00 003. B03.mp3 00:00 004. - B04.mp3 00:00 005. - B05.mp3 00:00 Move Play Page Change Change Numbers To Contents List Mark Mode Mark Exit Page 1/1 Music List Mark Mode USB1 USB Drive Drive1 001. - B01.mp3 00:00 Page 1/1 002. -B02.mp3 00:00 003. B03.mp3 00:00 004. - B04.mp3 00:00 005. - B05.mp3 00:00 Move Play Marked Menu Play Marked Mark All Unmark All Mark All Mark Page Change Unmark All Exit Mark Mode Exit Description Display the selected music file. Mark all music files on the screen. Deselect all marked music files. Exit Mark Mode Exit the Mark Mode. 5 Play music. Mark ENG ENGLISH 1 Press the Navigation buttons to scroll to make 36 ENTERTAINMENT 6 Control playback by using the following buttons. ENGLISH ENG This unit doesn't support the ID3 Tag yy embedded MP3 files. Page 1/1 Music List 3 file(s) Marked Tips for playing music files Drive1 Page 1/1 NOTE 004. - B04.mp3 00:00 005. - B05.mp3 00:00 006. - B06.mp3 00:00 007. - B07.mp3 00:00 005. - B05.mp3 02:30 / 03:25 Play with Photo Button 008. - B08.mp3 00:00 Option Hide Exit Description Stops playing back the file and moves back to the music list. Plays a music file Pauses or resumes playback Skips to the next file Skips to the previous file or Green button ENERGY SAVING or When playing, When you press the button, the previous music file will be played. When you press the button, the next music file will be played. Start playing the selected music files and then move to the Photo List. Press the ENERGY SAVING button repeatedly to change the brightness of your screen. Show the Option menu. Hides the option window. To display the options, press OK. When you press the EXIT button while the Music player is displayed, only the music will be stopped and the player will not return to normal viewing. When you press the EXIT button while the music is stopped or while the music player is hidden, the player will return to normal viewing. When using the < or > button during playback a cursor indicating the position can be played. yy Non-supported files are displayed the preview image by icon only . yy Abnormal files are displayed in the form of bitmap . yy A damaged or corrupted music does not play but displays 00:00 in playtime. yy A music downloaded from a paid service with copyright protection does not start but displays inappropriate information in playtime. yy If you press OK, buttons, screen saver is stopped. yy The PLAY( ), Pause( ), , , buttons on the remote control are also available in this mode. yy You can use the button to select the next music and the button to select the previous music. file name 002. B02.mp3 00:31 / 04:04 Time elapsed/ Duration ENTERTAINMENT Music options 2 Press the Navigation buttons to scroll to Set Audio Play. or Set Audio. and press OK. NOTE yy Option values changed in Movie List does not affect Photo List and Music List. yy Option value changed in Photo List and Music List are changed likewise in Photo List and Music List excluding Movie List. When you select the Set Audio Play, Viewing the Contents List Plays back the stored files using the Export option in SuperSign Manager. 1 Press the Navigation buttons to scroll to My Media and press OK. 2 Press the Navigation buttons to scroll to Contents List and press OK. 3 Press the Navigation buttons to scroll to a folder you want and press OK. 4 Press the Navigation buttons to scroll to a file you want and press OK. test1.cts 07/01/2011 1 Press the Navigation buttons to scroll to select Page 1/1 Contents List USB1 USB Drive Drive1 Page 1/1 test2.cts 07/01/2011 test3.cts 07/01/2011 test4.cts 07/01/2011 test5.cts 07/01/2011 the Repeat or Random. Move 2 Press the Navigation buttons to scroll to make To Movie List Change Numbers Play P Page Change Exit appropriate adjustments. NOTE When you select the Set Audio, 1 Press the Navigation buttons to scroll to select the Sound Mode, Clear Voice II or Balance. 2 Press the Navigation buttons to scroll to make appropriate adjustments. yy While playing media files from Contents List, only the BACK, EXIT or Volume button are available. Selecting the BACK or EXIT button stops playing media files and returns to the screen view mode. yy If there is the AutoPlay folder in the USB device and its files are in supported formats, they can be played back automatically when the USB device is connected to the monitor. ENG ENGLISH 1 Press MENU to access the Pop-Up menus. 37 38 ENTERTAINMENT DivX® VOD Guide ENGLISH ENG DivX® VOD Registration In order to play purchased or rented DivX® VOD contents, you should register your device with 10 digit DivX registration code from your device at www.divx.com/vod. 1 Press MENU to access the main menus. 2 Press the Navigation buttons to scroll to MY MEDIA and press OK. 3 Press the Blue button. 4 Press the Navigation buttons to scroll to DivX Reg. Code and press OK. 5 View the registration code of your display. 6 When you are finished, press EXIT. When you return to the previous menu, press BACK. You must register your device to play DivX protected videos. Registration code : ********** Register at http://vod.divx.com Close NOTE yy While you are checking the registration code, some buttons may not work. yy If you use the DivX registration code of another device, you cannot play the rented or purchased DivX file. Make sure to use the DivX registration code assigned to your product. yy The video or audio files that are not converted by the standard DivX codec may be corrupted or not be played. yy The DivX VOD code allows you to activate up to 6 devices under one account. ENTERTAINMENT DivX® VOD Deregistration 1 Press MENU to access the main menus. Using PIP/PBP Videos or pictures stored on the USB device can be displayed on a single monitor by dividing them into the main and subscreens. (See p.51) 2 Press the Navigation buttons to scroll to MY MEDIA and press OK. 1 Press the MENU button to move to OPTION 3 Press the Blue button. 4 Press the Navigation buttons to scroll to Deactivation and press OK. 5 Press the Navigation buttons to select Yes to and press OK. 2 Press PIP/PBP to select PIP or PBP and then press OK. confirm. PIP/PBP Deregistration code : ******** Deregister at http://vod.divx.com Continue with registration? Yes Mode Move Prev. Off Position PIP Size PBP No 6 When you are finished, press EXIT. When you return to the previous menu, press BACK. 3 Select Movie List or Photo List from My Media. NOTE Once the deregistration is executed, you yy must register your device again to see DivX® VOD contents. Movie List Photo List Music List Contents List ENG ENGLISH You should deregister your device with 8 digit DivX deregistration code from your device at www.divx. com/vod. 39 40 ENTERTAINMENT 4 Select a file you want and then press OK. 6 For sound select either Main or Sub. You must ENGLISH ENG to select the output sound before running the PIP or PBP function. Page 1/1 Movie List Drive1 USB1 USB Drive 001 002 005 006 Page 1/1 003 004 051. Apple_ ... 02:30:25 Select the sound path. Main Move Change Numbers To Photo list Play Page Change Sub Mark Exit Mark Mode 7 The sub screen is displayed on the main screen. 5 Select the PIP or PBP icon from the play list. 01:02:30 / 02:30:25 Exit Hide Option < MOVIE LIST > 2/13 Slideshow BGM < PHOTO LIST > Option Hide Exit CUSTOMIZING SETTINGS Accessing Main Menus MARK ARC PSM 1 Press MENU to access the main menus. P BRIGHT A NESS G E MUTE MENU 2 Press the Navigation buttons to scroll to one of the following menus and press OK. S.MENU OK BACK 3 Press the Navigation buttons to scroll to the setting or option you want AUTO TILE EXIT ID ON OFF and press OK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. PICTURE (See p.42) Adjusts the image size, quality, or effect. PICTURE OPTION (See p.47) Customizes the general settings. OPTION AUDIO (See p.45) Adjusts the sound quality, effect, or volume level. AUDIO NETWORK TIME MY MEDIA NETWORK (See p.53) Sets up the network setting. TIME (See p.46) Sets the time, date, or Timer feature. MY MEDIA (See p.27) Display and play movie, photo and music content stored on your USB ENG ENGLISH CUSTOMIZING SETTINGS 41 42 CUSTOMIZING SETTINGS PICTURE settings PICTURE Move ENGLISH ENG 1 Press MENU to access the main menus. Aspect Ratio 2 Press the Navigation buttons to scroll to PICTURE and press OK. Smart Energy Saving : Off Energy Saving Picture Mode : 16:9 : Off : Standard Backlight 3 Press the Navigation buttons to scroll to the setting or OK 70 Contrast 100 option you want and press OK. Brightness 50 Sharpness 50 -To return to the previous level, press BACK. Color 4 When you are finished, press EXIT. 60 Tint When you return to the previous menu, press BACK. 0 R G Color Temp. 0 W C Advanced Control Picture Reset Screen The available picture settings are described in the following: Setting Aspect Ratio Description Changes the image formatting. (See p.21). Adjusts the screen brightness corresponding to the surroundings. Energy Saving Level Smart Energy Saving Picture Mode Off Disables Energy Saving function Minimum/ Medium/ Maximum Selects the brightness level of the backlight. Screen off The screen turns off in 3 seconds. Adjusts the backlight and contrast depending on the screen brightness. Level Off Disables the Smart Energy Saving function. On Enables the Smart Energy Saving function to save power consumption as much as the value set in the smart energy saving rate. Selects one of the preset image or customizes options in each mode for the best Monitor screen performance. You are also able to customize advanced options of each mode. The available preset picture modes vary depending on the Monitor . Mode Vivid Adjusts the video image for the retail environment by enhancing the contrast, brightness, color, and sharpness. Standard Adjusts the image for a normal environment. Cinema Optimizes the video image for a cinematic look to enjoy movies as if you are in a movie theater. Sport Optimizes the video image for high and dynamic actions by emphasizing primary colors such as white, grass, or sky blue. Game Optimizes the video image for fast moving video such as PCs or games. CUSTOMIZING SETTINGS Setting Description Customizes the PC display options in RGB mode. Option Resolution Selects a proper resolution. See “Customizing PC display options”. Auto Config. Adjusts the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is in progress. Position/Size/ Phase Adjusts the options when the picture is not clear, especially when characters are shaky. Run Auto Config. before adjusting these. Reset Restores all options to the default setting. Picture Mode options Setting Description Backlight djusts the brightness of the screen by controlling the LCD backlight. If you decrease the A brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss. Contrast Increases or decreases the gradient of the video signal. You may use Contrast when the bright part of the picture is saturated. Brightness Adjusts the base level of the signal in the picture. You may use Brightness when the dark part of the picture is saturated. Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Color Adjusts intensity of all colors. Tint Adjusts the balance between red and green levels. Color Temp. Set to warm to enhance hotter Colors such as red, or set to cool to make picture bluish. Advanced Control Customizes the advanced options. Refer to the Advanced image options. (See p.44). Picture Reset Restores the options to the default setting. NOTE If the 'Picture Mode' setting in the Picture menu is set to Vivid, Standard, Cinema, Sport or Game yy the subsequent menus will be automatically set. You cannot adjust color and tint in the RGB-PC/ DVI-D-PC(DTV)/ HDMI-PC mode. yy When using the Smart Energy Saving function, the screen may look saturated in the white area of a yy still image. If Energy Saving is set to Minimum, Medium, or Maximum, the Smart Energy Saving function is yy disabled. ENG ENGLISH SCREEN (In RGB Mode Only) 43 44 CUSTOMIZING SETTINGS Advanced Control ENGLISH ENG Setting Description Dynamic Contrast (Off/High/Medium/Low) Adjusts the contrast to keep it at the best level according to the brightness of the screen. The picture is improved by making bright parts brighter and dark parts darker. (Function works in the following mode - AV(CVBS), Component, HDMI-DTV, Display Port-DTV ) Dynamic Color (Off/High/Low) Adjusts screen Colors so that they look livelier, richer and clearer. This feature enhances hue, saturation and luminance so that red, blue, green and white look more vivid. (Function works in the following mode - AV(CVBS), Component, HDMI-DTV, Display Port-DTV ) Clear White (Off/High/Low) Make the white area of screen brighter and more white. Skin Color (-5 to 5) It detects the skin area of video and adjusts it to express a natural skin color. Noise Reduction (Off/High/Medium/Low) educes screen noise without compromising video quality. R (Function works in the following mode - AV(CVBS), Component, HDMI-DTV, Display Port-DTV ) Digital Noise Reduction This option reduces the noise produced while creating digital video signals. (Off/High/Medium/Low) Gamma (High/Medium/Low) Set your own gamma value. On the monitor, high gamma values display whitish images and low gamma values display high contrast images. Black Level (High/Low) Low: The picture of the screen gets darker. High: The picture of the screen gets brighter. Set black level of the screen to proper level. (Function works in the following mode - AV(CVBS), Component, HDMI-DTV, Display Port-DTV ) 45 CUSTOMIZING SETTINGS AUDIO settings AUDIO Clear Voice II 2 Press the Navigation buttons to scroll to AUDIO and press Sound Mode : Off Balance OK. OK 0 L R : Standard Infinite Sound : Off Treble 50 3 Press the Navigation buttons to scroll to the setting or Bass option you want and press OK. 50 Reset -To return to the previous level, press BACK. 4 When you are finished, press EXIT. Digital Audio Input : Audio In Speaker : On When you return to the previous menu, press BACK. The available audio options are described in the following: Setting Description Clear Voice ll By differentiating the human sound range from others,it helps users makes dialog easier to understand. Balance Adjusts balance between the left and right speakers according to your room environment. Sound Mode Mode Standard Select when you want standard-quality sound. Music Select when you listen to music. Cinema Select when you watch movies. Sport Select when you watch sport events. Game Selects when you play games. Digital Audio Input HDMI/Display Port: Outputs the sound of digital signal from HDMI and display ports through the monitor speaker. Audio In: Outputs the sound through the monitor speaker by connecting HDMI and display ports to the Audio In port. Speaker ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.) OFF: Disables sound to the monitor speaker. Use this option when using an external sound device. Sound Mode options Setting Description Infinite Sound LG's Infinity Sound option provides 5.1 channel stereo sound from two speakers. Treble Controls the dominant sounds in the output. When you turn up the treble, it will increase the output to the higher frequency range. Bass Controls the softer sounds in the output. When you turn up the bass, it will increase the output to the lower frequency range. Reset Resets the sound mode to the default setting. ENG ENGLISH 1 Press MENU to access the main menus. Move 46 CUSTOMIZING SETTINGS TIME settings TIME Move ENGLISH ENG 1 Press MENU to access the main menus. Clock 2 Press the Navigation buttons to scroll to TIME and press Off Time : Off On Time : Off Sleep Timer : Off Power On Delay : Off Auto Off : 15 min. Automatic Standby : Off OK. 3 Press the Navigation buttons to scroll to the setting or option you want and press OK. OK -To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available time settings are described in the following: Setting Description Clock Sets the time feature. Off/On Time Sets the time to turn on or off the Monitor. Sleep Timer Sets the length of time until the Monitor to turns off. When you turn the Monitor off and turn it on again, the Sleep Timer will be set to off. Power on delay When connecting multiple monitors and turning the power on, the monitors are turned on individually to prevent overload. Auto Off If Auto Off is active and there is no input signal, the set switches to off mode automatically after 15 minutes. Automatic Standby If you do not use the monitor for more than 4 hours, it will be in off mode automatically. NOTE Off/On Time can be saved for up to seven schedules; the Monitor is turned on or off at the preset time yy in the schedule list. If multiple preset times are stored in the schedule list, this function works at the nearest time from the current time. The scheduled power-off function works properly only when the device time is set correctly. yy When the scheduled power-on and power-off times are the same, the power-off time has priority over yy the power-on time if the set is turned on, and vice versa if the set is turned off. "The ""Automatic Standby"" and ""Auto off"" functions may not be available in some countries." yy 47 CUSTOMIZING SETTINGS OPTION settings OPTION Move Language 2 Press the Navigation buttons to scroll to OPTION and press ISM Method : Normal DPM Select : On Fail Over : Off OK. Factory Reset 3 Press the Navigation buttons to scroll to the setting or option Set ID you want and press OK. Tile Mode -To return to the previous level, press BACK. PIP/PBP 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. :1 Key Lock : Off Interface Select : RS232C PC Power Control : Not connected USB Content Recovery : Off Product/Service Info. Portrait Mode The available option settings are described in the following: Setting Description Language To choose the language in which the control names are displayed. ISM Method A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods could result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for a long period of time. Setting Normal Leave on normal if you don't foresee image burn in being a problem. Orbiter May help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes. Inversion This function inverts the panel color of the screen. The panel color is automatically inverted every 30 minutes. White Wash White wash fills the screen with solid white. This helps removes permanent images burned into the screen. A permanent image may be impossible to clear entirely with white wash. DPM Select A user can choose to turn the power saving mode on / off. Fail Over If there is no input signal, it automatically switches to another input with signal. mode Off Stops auto switch of the input source. Auto Attempts to find another input source having video signal according to the defined input order if no video signal comes from the current input source. (Refer to the sequence of the table below.) Current Input Source Attempt 1 Attempt 2 RGB HDMI DVI DP DVI HDMI DP RGB Attempt 3 HDMI DVI DP RGB DP HDMI DVI RGB Manual Attempt 4 If there is no available video signal to switch to, then the current input source remains. The input source changes according to the specified order. If there is no video signal from the specified input source, then the current input source remains. Factory Reset Select this option to return to the default factory settings. Set ID You can assign a unique Set ID NO (name assignment) to each product when several products are connected for display. Specify the number (1 to 255) using the button and exit. Use the assigned Set ID to individually control each product using the Product Control Program. ENG ENGLISH 1 Press MENU to access the main menus. OK 48 CUSTOMIZING SETTINGS Setting ENGLISH ENG Tile Mode Description Tile Mode To use this function - Must be displayed with various other products. - Must be in a function that can be connected to RGB Cable by distributor and RS-232C. Tile mode and choose Tile alignment and set the ID of the current product to set location. * Only after pressing the SET button the adjustments made to the settings will be saved. - Tile mode : column x row ( c = 1 to 15 r = 1 to 15) - 15 x 15 available. - Configuration of an integration screen is also available as well as configuration of One by one Display. Auto Config. Adjusts the screen position automatically. The displayed image may be unstable for a few seconds while the configuration is in progress. PC Position Moving the screen position horizontally and vertically. PC Size Adjust the horizontal and vertical size of the screen taking into account the size of the bezel. Natural The image is omitted by the distance between the screens to be naturally shown. Reset Function to initialize and release a Tile. All Tile setting are released when selecting Tile recall and the screen returns to Full screen. NOTE y yIf Tile Mode is enabled, Smart Energy Saving and the Auto option in Energy Saving will be disabled to provide the same picture quality as other displays. PIP/PBP Videos or photos stored on the USB device can be displayed on a single monitor by dividing them into the main and subscreens. Option Mode Sets the type of secondary screen. *OFF: Disables the secondary screen. *PIP (Picture In Picture): Displays the secondary screen in the main screen. *PBP (Picture By Picture): Displays the secondary screen next to the main screen. Position Adjusts the position of the subscreen (top left, bottom left, top right, bottom right) The default value is inthe bottom right. Size Adjusts the size of the subscreen (Size 0-10). The default size of the PIP (Size: 0) is 480x270; the maximum size (Size: 10) is 960x540. NOTE y yThe Position and Size options are enabled only in PIP mode. CUSTOMIZING SETTINGS Setting 49 Description Key input does not work. This prevents invalid key input. Interface Select RS232C Communicates with the connected PC in serial mode. PC Power Control The current model does not support this function. USB Content Recovery Replays the content in a USB when the power is back on if it is turned off during playing a content. (This function operates the same when a USB is disconnected and connected again.) Product/Service Info. Displays the model name, software version, serial number, IP address, MAC address and home page. Portrait mode Rotate OSD clockwise (90°,270°) Option Rotate OSD clockwise 90°. 270° Rotate OSD clockwise 270°. Speaker Digital Audio Out Sound Mode Clear Voice II Balance Move AUDIO Clear Voice II Balance Sound Mode AUDIO Digital Audio Out Speaker Move OK 90° OK 90° 270° ENG ENGLISH Key Lock 50 CUSTOMIZING SETTINGS Tile Mode Tile Mode - Natural mode ENGLISH ENG This monitor can be tiled with additional monitors to create a large tiled display. Off When the Tile Mode option is disabled When active, the part of the image that would normally be displayed in the gap between the monitors is omitted. 1X2 When using 2 monitors Before ID 2 ID 1 Tile ID 3X3 When using 9 monitors 2X2 When using 4 monitors ID 1 ID 2 ID 3 ID 4 ID 1 ID 2 ID 3 ID 4 ID 5 ID 6 ID 7 ID 8 ID 9 4X4 When using 16 monitors ID 1 ID 2 ID 3 ID 4 ID 5 ID 6 ID 7 ID 8 ID 9 ID 10 ID 11 ID 12 ID 13 ID 14 ID 15 ID 16 5X5 When using 25 monitors ID 1 ID 2 ID 3 ID 4 ID 5 ID 6 ID 7 ID 8 ID 9 ID 10 ID 11 ID 12 ID 13 ID 14 ID 15 ID 16 ID 17 ID 18 ID 19 ID 20 ID 21 ID 22 ID 23 ID 24 ID 25 After CUSTOMIZING SETTINGS PIP/PBP NOTE y yThe subscreen is only supported when using the USB device. Sub Mode USB *PIP(Picture In Picture): Displays the Sub screen in the main screen. *PBP(Picture By Picture): Displays the Sub screen next to the main screen. Sub screen Main screen PIP PBP Position Adjusts the position of the subscreen (top left, bottom left, top right, bottom right) top left top right bottom left bottom right Size Adjusts the size of the subscreen (Size 0-10). PBP 960x1080 10 : 960x540 PIP 0: 480x270 < 1920x1080 > Main Component O RGB O HDMI/DVI-D/Display Port O AV X y yYou can only change the size and position in PIP mode. y yWith PBP selected, the Aspect Ratio option in the PICTURE menu is disabled (Fixed as 16:9). y yWhile running the PBP function, the Tile Mode function does not work. y yYou must select the output sound before running the PIP or PBP functions. (Select either Main or Sub.) y yIf you fail to select Main or Sub from the sound selection box, and if the OSD disappears after either a period of time or when the Exit or Back key is pressed, the PIP/PBP subscreen is not activated. y yYou cannot change the sound while running the PIP or PBP functions. If you want to change the sound, please restart PIP/PBP. y yThe picture quality of the subscreen is set according to the values selected in the main menu, not the USB device. y yEven when the power is turned off or on, if the USB device is connected, the PIP/PBP mode plays again from where it left off. y yIf you play videos you selected in PIP/PBP mode, the videos will play back repeately in succession. y yThe buttons below work in PIP mode. Button Photo Movie ENG ENGLISH Displays videos or photos stored in the USB device on a single monitor by dividing it into the main and sub screens. (See p.39) 51 52 CUSTOMIZING SETTINGS Picture ID ENGLISH ENG Picture ID is used to change the settings of a specific display using a single IR receiver for multivision. Communication is possible between a set with an IR receiver and other sets using audio cables. Each set is identified by a set ID. If you assign the Picture ID using the remote control, only displays with the same Picture ID and Set ID can be controlled remotely. AUDIO (RGB/DVI) RS-232C OUT RS-232C OUT RS-232C OUT RS-232C IN RS-232C IN RS-232C IN REMOTE CONTROL IN POWER ENERGY MONITOR IR Receiver OFF Audio cableDEF ABC GHI PQRS 1/a/A Picture ID TUV -*# CLEAR JKL Picture ID MNO Off Close WXYZ ARC PSM P BRIGHT A NESS G E 2X2 Multi-Vision (Total Set ID: 4) Set IDs are assigned as shown in the picture. MUTE AUTO S.MENU ▶ CloseINPUT ENERGY MONITOR SAVING Off ◀ POWER ON MARK MENU ON button repeatedly, the Picture ID cycles through OFF and 0 to 4. Assign the ID you want. INPUT ON .,! 2 If you press the left/right buttons or press the OFF SAVING If you assign. , !the Set each set with yy ABCID to DEF multi-vision, and then assign the Picture ID GHI JKL MNO using the red button on the remote control, the key command isTUVdisplayed for the set PQRS WXYZ with the same Set ID and Picture ID. A set 1/a/A CLEAR -*# with different Set IDs and Picture IDs cannot MARK be controlled by IRARC signals. P Please refer to thePSM Installation yy BRIGHT A Manual for NESS G more information on Total SetEID assignment. MUTE MENU AUTO S.MENU 1 Press the red ON button on the remote control to assign the PictureOKID. BACK TILE ID ON OFF NOTE EXIT OK For example, if the Picture ID is assigned to yy BACK 2, the upper right TILE displayEXIT (Set ID: 2) can be ID controlled by IR signals. OFF ON For each set, you can change the settings yy for the PICTURE, AUDIO, TIME, NETWORK and MY MEDIA menus or the hot keys on the remote control. If you press the green OFF button for Picture yy IDs, the Picture IDs for all sets are turned off. If you then press any button on the remote control, all sets will start working again. Picture ID will be disabled while using the yy MY MEDIA menu. CUSTOMIZING SETTINGS NETWORK settings NETWORK Move Player Name Setting 2 Press the Navigation buttons to scroll to NETWORK and Network Setting : None Network Status : Not connected press OK. 3 Press the Navigation buttons to scroll to the setting or option Server IP Setting Server IP Status : Not connected you want and press OK. -To return to the previous level, press BACK. 4 When you are finished, press EXIT. When you return to the previous menu, press BACK. The available option settings are described in the following: Setting Description Player Name Sets the player name used in SuperSign Manager.(Up to 20 characters) Network Setting Configure the network settings. Network Status Display the network status. - Internet is connected : Extermally connected - Home network is connected : Only internally connected - Not connected : When there is no network connection Server IP Setting Sets the IP address of the computer (server) on which SuperSign Manager is installed. Server IP Status Displays the connection status with the server. - Not connected : When there is no network connection with SuperSign server - Waiting for approval : When network connection with SuperSign server has been made, but access to server has not been approved by the server - Rejected : When network connection with SuperSign server has been made, but access to server has been rejected by the server - Internet is connected : When network connection with SuperSign server has been made and access to server has also been approved by the server CAUTION When setting the Player Name, input delay may occur if you press the buttons on the remote control yy continuously. OK ENG ENGLISH 1 Press MENU to access the main menus. 53 54 MAKING CONNECTIONS MAKING CONNECTIONS ENGLISH ENG Connect various external devices to the ports on the Monitor’s back panel. 1 Find an external device you want to connect to your Monitor shown on the following illustration. 2 Check the connection type of the external device. 3 Go to the appropriate illustration and check the connection details. HD Receiver HDMI - See p.55 Component - See p.55 AV(CVBS) - See p.56 DVD HDMI - See p.55 Component - See p.55 AV(CVBS) - See p.56 Speaker VCR AV(CVBS) - See p.56 Component - See p.55 USB Memory storage – See p.26 PC RGB - See p.16 DVI-D - See p.16 HDMI - See p.17 Display Port - See p.17 LAN - See p.57 Camcorder/Camera HDMI - See p.55 Component - See p.55 AV(CVBS) - See p.56 Gaming device HDMI - See p.55 Component - See p.55 AV(CVBS) - See p.56 NOTE If you connect a gaming device to the Monitor, use the cable supplied with the gaming device. yy MAKING CONNECTIONS Connect a HD receiver, DVD, or VCR player to the Monitor and select an appropriate input mode. Component connection Transmits the analog video and audio signals from an external device to the Monitor. Connect the external device and the Monitor with the 15 pin signal to RCA cable as shown on the following illustration. To display images by using progressive scan, make sure to use the component cable. HDMI connection Transmits the digital video and audio signals from an external device to the Monitor. Connect the external device and the Monitor with the HDMI cable as shown on the following illustration. (not included) (not included) VIDEO AUDIO OUT (not included) HDMI NOTE Use a High Speed HDMI™ Cable. yy High Speed HDMI™ Cables are tested to yy carry an HD signal up to 1080p and higher. ENG ENGLISH Connecting to a HD receiver, DVD, Camcorder, Camera, Gaming Device or VCR player 55 56 MAKING CONNECTIONS Connecting to a USB Transmits the analog video and audio signals from an external device to the Monitor. Connect the external device and the Monitor with the 15 pin signal to RCA cable as shown on the following illustration. Connect a USB storage device such as s USB flash memory, external hard drive, MP3 player or a USB memory card reader to the Monitor and access the USB menu to use various multimedia files. or (not included) AUDIO OUT (not included) VIDEO OUT ENGLISH ENG AV(CVBS) connection MAKING CONNECTIONS 57 Connecting to the LAN ENG ENGLISH A Connect PC to Monitor directly. LAN Monitor PC B Using a router(Switch) LAN Monitor Switch Network PC C Using the Internet.Network LAN Network Monitor PC NOTE Using LAN establishes communication yy between your PC and the monitor and enables to use the OSD menus on the PC as well as on the monitor. 58 MAKING CONNECTIONS Daisy Chain Monitors ENGLISH ENG Use this function to share the RGB video signal with other monitors without having to use a separate signal splitter box. To use different products connected to each other Connect one end of the signal input cable (15-pin D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector of other products Monitor 4 Monitor 3 Monitor 2 Monitor 1 15-pin D-Sub Signal Cable (Max 3m) VIDEO OUT OUT AV(CVBS) Mode VIDEO RGB OUT (PC) Component Mode RGB Mode NOTE The number of monitors that can be connected to one output may vary depending on signal status yy and cable loss. If the signal status is good, and there is no cable loss, it is possible to connect up to 9 monitors. If you want to connect more than this number of monitors, it is recommended to use a distributor. When multi-connecting in/out cascade format, no loss cables are recommended. yy TROUBLESHOOTING 59 No image is displayed Problem Is the product power cord connected? Does the 'Out of range' message appear? oes the 'Check signal cable' D message appear? Resolution y y See if the power cord is properly connected to the outlet. y y The signal from the PC (video card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the Specifications in this manual. * Maximum resolution RGB, HDMI, DVI-D, Display Port : 1920 x 1080 @ 60 Hz y y The signal cable between PC and product is not connected. Check the signal cable. y y Press the 'INPUT' menu in the remote Control to check the input signal. 'Unknown Product' message appears when the product is connected. Problem Did you install the driver? Resolution y y Install the product driver, which is provided with the product, or download it from the web site. (http://www.lg.com) y y See if the plug&play function is supported by referring to the video card user manual. ENG ENGLISH TROUBLESHOOTING 60 TROUBLESHOOTING 'Key Lock On' message appears. ENGLISH ENG Problem The 'Key Lock On' message appears when pressing the Menu button. Resolution The Lock function prevents the OSD settings from being changed inadvertently. To release the lock, go to Menu and Option and disable the Key Lock option. The screen image looks abnormal. Problem Resolution Is the screen position wrong? y y D-Sub analog signal - Press the "AUTO" button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. y y See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel "Display" Setting menu. Do thin lines appear on the y y D-Sub analog signal - Press the "AUTO" button in the remote control background screen? to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Clock OSD menu. Horizontal noise appears or the y y D-Sub analog signal - Press the "AUTO" button in the remote control characters look blurred. to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Phase OSD menu. The screen is displayed y y The proper input signal is not connected to the signal port. Connect abnormally. the signal cable that matches with the source input signal. After-image appears on the product. Problem After-image appears when the product is turned off. Resolution y y If you use a fixed image for a long time, the pixels may be damaged quickly. Use the screen-saver function. TROUBLESHOOTING 61 The audio function does not work. No sound? Resolution y See if the audio cable is connected properly. y Adjust the volume. y See if the sound is set properly. y Adjust the Clear Voice ll, Treble and Bass appropriately. Sound is too dull. y y y y Sound is too low. y y Adjust the volume. Screen color is abnormal. Problem Resolution Screen has poor color resolution y y Set the number of colors to more than 24 bits (true color) Select (16 colors). Control Panel - Display - Settings - Color Table menu in Windows. Screen color is unstable or y y Check the connection status of the signal cable. Or, re-insert the PC mono-colored. video card. Do black spots appear on the y y Several pixels (red, green, white or black color) may appear on the screen? screen, which can be attributable to the unique characteristics of the LCD panel. It is not a malfunction of the LCD. The operation does not work normally. Problem Resolution The power suddenly turned off. y y Is the sleep timer set? heck the power control settings. Power interrupted y yC ENG ENGLISH Problem 62 SPECIFICATIONS ENGLISH ENG SPECIFICATIONS 42WS50MW 42WX30MW LCD Panel Screen Type Video Signal Pixel Pitch Max. Resolution 1067.31 mm Wide (42 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1067.31 mm 0.4845 mm (H) x 0.4845 mm (V) RGB : 1920 X 1080 @60 Hz HDMI,DVI-D, Display Port : 1920 X 1080 @60 Hz - It may not be supported depending on the OS or video card type. Recommended Resolution RGB : 1920 X 1080 @60 Hz HDMI,DVI-D, Display Port : 1920 X 1080 @60 Hz - It may not be supported depending on the OS or video card type. Horizontal Frequency Vertical Frequency Synchronization Type Input Connector Power Rated Voltage Power Consumption Environmental conditions Operating Temperature Operating Humidity Storage Temperature Storage Humidity RGB : 30 kHz to 83 kHz HDMI,DVI-D, Display Port : 30 kHz to 83 kHz RGB : 56 Hz to 75 Hz HDMI,DVI-D, Display Port : 56 Hz to 60 Hz Separate Sync, Composite Sync, Digital 15-pin D-Sub, Component, AV(CVBS), HDMI, DVI-D, Display Port, RS-232C, LAN, USB, Audio 100-240 V~ 50/60 Hz 1.6 A On Mode : 115 W Typ. Sleep Mode : ≤ 0.7 W Off Mode : ≤ 0.5 W 0 °C to 40 °C 10 % to 80 % -20 °C to 60 °C 5 % to 95 % Product specifications shown above may be changed without prior notice due to upgrade of product functions. SPECIFICATIONS ENG ENGLISH Dimensions (Width x Height x Depth) / Weight 961.6 mm x 554.5 mm x 31.9 mm / 13.6 kg 961.6 mm x 628.9 mm x 298.3 mm / 15 kg 961.6 mm x 554.5 mm x 81.5 mm / 14.4 kg 961.6 mm x 628.9 mm x 298.3 mm / 15.8 kg * Applicable only for models that support the speakers Audio 63 RMS Audio Output Input Sensitivity Speaker Impedance 10 W + 10 W (R + L) 0.7 Vrms 8Ω Product specifications shown above may be changed without prior notice due to upgrade of product functions. 64 SPECIFICATIONS ENGLISH ENG 47WS50MW 47WX30MW LCD Panel Screen Type Video Signal Pixel Pitch Max. Resolution 1192.87 mm Wide (47 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1192.87 mm 0.5415 mm (H) x 0.5415 mm (V) RGB : 1920 X 1080 @60 Hz HDMI,DVI-D, Display Port : 1920 X 1080 @60 Hz - It may not be supported depending on the OS or video card type. Recommended Resolution RGB : 1920 X 1080 @60 Hz HDMI,DVI-D, Display Port : 1920 X 1080 @60 Hz - It may not be supported depending on the OS or video card type. Horizontal Frequency Vertical Frequency Synchronization Type Input Connector Power Rated Voltage Power Consumption Environmental conditions Operating Temperature Operating Humidity Storage Temperature Storage Humidity RGB : 30 kHz to 83 kHz HDMI,DVI-D, Display Port : 30 kHz to 83 kHz RGB : 56 Hz to 75 Hz HDMI,DVI-D, Display Port : 56 Hz to 60 Hz Separate Sync, Composite Sync, Digital 15-pin D-Sub, Component, AV(CVBS), HDMI, DVI-D, Display Port, RS-232C, LAN, USB, Audio 100-240 V~ 50/60 Hz 1.8 A On Mode : 120 W Typ. Sleep Mode : ≤ 0.7 W Off Mode : ≤ 0.5 W 0 °C to 40 °C 10 % to 80 % -20 °C to 60 °C 5 % to 95 % Product specifications shown above may be changed without prior notice due to upgrade of product functions. SPECIFICATIONS ENG ENGLISH Dimensions (Width x Height x Depth) / Weight 1071.8 mm x 616 mm x 31 mm / 15.6 kg 1071.8 mm x 690.4 mm x 298.3 mm / 16.9 kg 1071.8 mm x 616 mm x 80.6 mm / 16.5 kg 1071.8 mm x 690.4 mm x 298.3 mm / 17.8 kg * Applicable only for models that support the speakers Audio 65 RMS Audio Output Input Sensitivity Speaker Impedance 10 W + 10 W (R + L) 0.7 Vrms 8Ω Product specifications shown above may be changed without prior notice due to upgrade of product functions. 66 SPECIFICATIONS ENGLISH ENG 55WX30MW LCD Panel Screen Type Video Signal Pixel Pitch Max. Resolution 1387.80 mm Wide (54.6 inch) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1387.80 mm 0.630 mm (H) x 0.630 mm (V) RGB : 1920 X 1080 @60 Hz HDMI,DVI-D, Display Port : 1920 X 1080 @60 Hz - It may not be supported depending on the OS or video card type. Recommended Resolution RGB : 1920 X 1080 @60 Hz HDMI,DVI-D, Display Port : 1920 X 1080 @60 Hz - It may not be supported depending on the OS or video card type. Horizontal Frequency Vertical Frequency Synchronization Type Input Connector Power Rated Voltage Power Consumption Environmental conditions Operating Temperature Operating Humidity Storage Temperature Storage Humidity RGB : 30 kHz to 83 kHz HDMI,DVI-D, Display Port : 30 kHz to 83 kHz RGB : 56 Hz to 75 Hz HDMI,DVI-D, Display Port : 56 Hz to 60 Hz Separate Sync, Composite Sync, Digital 15-pin D-Sub, HDMI, DVI-D, Display Port, RS-232C, LAN, USB, Audio 100-240 V~ 50/60 Hz 1.8 A On Mode : 130 W Typ. Sleep Mode: ≤ 0.7 W Off Mode : ≤ 0.5 W 0 °C to 40 °C 10 % to 80 % -20 °C to 60 °C 5 % to 95 % Product specifications shown above may be changed without prior notice due to upgrade of product functions. SPECIFICATIONS ENG ENGLISH Dimensions (Width x Height x Depth) / Weight 1241.9 mm X 712.6 mm X 32.2 mm / 23.2 Kg 1241.9 mm X 790.8 mm X 298.3 mm / 28.2 Kg 1241.9 mm X 712.6 mm x 32.3 mm / 24.1 Kg 1241.9 mm X 712.6 mm X 298.3 mm / 28.8 Kg * Applicable only for models that support the speakers Audio 67 RMS Audio Output Input Sensitivity Speaker Impedance 10 W + 10 W (R + L) 0.7 Vrms 8Ω Product specifications shown above may be changed without prior notice due to upgrade of product functions. 68 SPECIFICATIONS Dimensions ENGLISH ENG The illustrations in this manual may differ from the actual product and accessories. Please see the "Mounting on a wall" section for sizes of screws. (Unit : mm) 42WS50MW 42WX30MW 47WS50MW 47WX30MW A 961.6 1071.8 B 11.5 11.5 C 11.5 11.5 D 554.5 616 E 628.9 690.4 F 11.5 11.5 G 85.9 85.9 H 706 804 I 280.8 335.9 J 77.3 108 K 400 400 L 400 400 M 81.5 80.6 N 52.6 52.6 O 31.9 31.0 P 134.7 135.6 Q 298.3 298.3 Product specifications shown above may be changed without prior notice due to upgrade of product functions. SPECIFICATIONS 69 Dimensions ENG ENGLISH The illustrations in this manual may differ from the actual product and accessories. Please see the "Mounting on a wall" section for sizes of screws. 55WX30MW (Unit : mm) 11.2 1241.9 32.2 712.6 790.8 11.2 53.7 128.7 89.4 980.8 156.3 400 421 400 Product specifications shown above may be changed without prior notice due to upgrade of product functions. 70 SPECIFICATIONS DTV Mode RGB (PC) supported mode ENGLISH ENG Resolution Horizontal Vertical Frequency(kHz) Frequency(Hz) Resolution Component HDMI,Display Port (DTV) 640 x 350 31.469 70.8 480i o x o x 720 x 400 31.468 70.8 576i 640 x 480 31.469 59.94 480p o o 640 x 480 37.5 75 576p o o 800 x 600 37.879 60.317 720p o o 800 x 600 46.875 75 1080i o o 832 x 624 49.725 74.55 1080p o o 1024 x 768 48.363 60 1024 x 768 60.123 75.029 1280 x 720 44.772 59.855 1366 x 768 47.7 60 1280 x 1024 63.981 60.02 1280 x 1024 79.98 75.02 1680 x 1050 65.290 59.954 1920 x 1080 67.5 60 NOTE HDMI,DVI-D,Display Port (PC) supported mode Resolution Horizontal Vertical Frequency(kHz) Frequency(Hz) 640 x 480 31.469 59.94 800 x 600 37.879 60.317 1024 x 768 48.363 60 1280 x 720 44.772 59.855 1366 x 768 47.7 60 1280 x 1024 63.981 60.02 1680 x 1050 65.290 59.954 1920 x 1080 67.5 60 When the cable is connected to the HDMI or yy the display port, you can select the PC/DTV mode optionally. It is recommended you to set to the PC mode when connecting to PC; the DTV mode when connecting to DTV. NOTE Vertical frequency: To enable the user to yy watch the product display, screen image should be changed tens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second. The unit is Hz. Horizontal frequency: The horizontal interval yy is the time to display one vertical line. When 1 is divided by the horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The unit is kHz. IR CODES 71 IR CODES ENG ENGLISH All models do not support the HDMI/USB function. yy Some key codes are not supported depending on the model. yy Code (Hexa) 95 08 Function Energy Saving ( ) POWER Note R/C BUTTON R/C BUTTON (ON/OFF) 0B INPUT R/C BUTTON C4 Monitor On R/C BUTTON C5 Monitor Off R/C BUTTON 43 MENU R/C BUTTON 40 Up ( ) R/C BUTTON 41 Down ( ) R/C BUTTON 07 Left ( ) R/C BUTTON 06 Right ( ) R/C BUTTON 44 OK( ) 28 BACK( 5B EXIT R/C BUTTON 4D PSM R/C BUTTON 02 Volume R/C BUTTON 03 Volume R/C BUTTON 09 MUTE E0 Bright (Page UP) R/C BUTTON E1 Bright (Page Down) R/C BUTTON 10 to 19 Number Key 0 to 9 R/C BUTTON 72 Red Key (ID ON) R/C BUTTON 71 Green Key (ID OFF) R/C BUTTON 63 Yellow Key R/C BUTTON 61 Blue Key R/C BUTTON 7B TILE R/C BUTTON 76 ARC (4:3) R/C BUTTON 77 ARC (16:9) R/C BUTTON AF ARC (ZOOM) R/C BUTTON 79 ARC (MARK) R/C BUTTON 99 Auto Config. R/C BUTTON R/C BUTTON ) R/C BUTTON R/C BUTTON B1 R/C BUTTON B0 R/C BUTTON BA R/C BUTTON 8F R/C BUTTON 8E R/C BUTTON 72 CONTROLLING THE MULTIPLE PRODUCT ENGLISH ENG CONTROLLING THE MULTIPLE PRODUCT Use this method to connect several products to a single PC. You can control several products at a yy time by connecting them to a single PC. In the Option menu, Set ID must be between 1 and 255 without being duplicated. yy Connecting the cable Connect the RS-232C cable as shown in the picture. The RS-232C protocol is used for communication between the PC and product. You can turn the yy product on/off, select an input source or adjust the OSD menu from your PC. Monitor 1 PC Monitor 2 Monitor 3 Monitor 4 RS-232C Cable (not included) RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) RXD TXD GND DTR DSR RTS CTS PC Set 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 (Female) TXD RXD GND DSR DTR CTS RTS D-Sub 9 (Female) Communication Parameter y y y y y y y Baud Rate : 9600 buad Rate (UART) y Data Length : 8 bit y Parity Bit : None y Stop Bit : 1bit y Flow Control : None y Communication Code : ASCII code y Use a crossed (reverse) cable y 3-Wire Configurations (Not Standard) PC Set 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 (Female) D-Sub 9 (Female) RXD TXD GND DTR DSR RTS CTS TXD RXD GND DSR DTR CTS RTS CONTROLLING THE MULTIPLE PRODUCT 73 Command reference list DATA (Hexadecimal) 2 01. Power k a 00 to 01 02. Input Select x b Refer to ‘Input Select.’ 03. Aspect Ratio k c Refer to ‘Aspect Ratio.’ 04. Energy Saving j q Refer to ‘Energy Saving.’ 05. Picture mode d x Refer to ‘Picture mode.’ 06. Contrast k g 00 to 64 07. Brightness k h 00 to 64 08. Sharpness k k 00 to 64 09. Color k i 00 to 64 10. Tint k j 00 to 64 11. Color Temperature x u 00 to 64 12. H Position f q 00 to 64 13. V Position f r 00 to 64 14. H Size f s 00 to 64 15. Auto configuration j u 01 16. Balance k t 00 to 64 17. Sound mode d y Refer to ‘Sound mode.’ 18. Treble k r 00 to 64 19. Bass k s 00 to 64 20. Speaker d v 00 to 01 21. Volume Mute k e 00 to 01 22. Volume Control k f 00 to 64 23. Time 1(Years/ Months/ Days) f a Refer to ‘Time 1.’ 24. Time 2(Hours/ Minutes/Seconds) f x Refer to ‘Time 2.’ 25. Off Timer(Repeat mode/ Time) f e Refer to ‘Off Timer.’ 26. On Timer(Repeat Mode/ Time) f d Refer to ‘On Timer.’ 27. On Timer Input f u Refer to ‘On Timer Input.’ 28. Sleep Time f f 00 to 08 29. Power On Delay f h 00 to 64 30. Automatic Standby m n 00 to 01 31. Auto Off f g 00 to 01 32. Language f i Refer to ‘Language.’ 33. Power Indicator(Standby Light) f o 00 to 01 34. Power Indicator(Power Light) f p 00 to 01 35. ISM mode j p Refer to ‘ISM Method.’ m i 00H to 02H 36. Fail Over Select ENG ENGLISH COMMAND 1 74 CONTROLLING THE MULTIPLE PRODUCT COMMAND ENGLISH ENG DATA (Hexadecimal) 1 2 m j Refer to ‘Fail Over Input Select.’ 38. Reset f K 00 to 03 39. Tile Mode d d 00 to FF 40. Tile Mode Check d z FF 41. Tile ID d i Refer to ‘Tile ID.’ 42. Tile H Position d e 00 to 32 43. Tile V Position d f 00 to 32 44. Tile H Size d g 00 to 32 45. Tile V Size d h 00 to 32 46. Natural Mode (In Tile mode) d j 00 to 01 47. DPM Select f j 00 to 01 48. FAN Control d o 00H to 03 49. FAN Fault Check d w FF 50. Temperature Value d n FF 51. Remote Lock/ key Lock k m 00 to 01 52. Key m c Refer to ‘Key.’ 53. OSD Select k l 00 to 01 54. Elapsed time return d l FF 55. Serial No. Check f y FF 56. S/W Version f z FF 57. White Balance Red Gain j m 00 to FE 58. White Balance Green Gain j n 00 to FE 59. White Balance Blue Gain j o 00 to FE 60. Backlight m g 00 to 64 61. PC Power Control d t 00 to 01 62. PC Power d s 00 to 01 37. Fail Over Input Select Note : During USB operations such as Dvix or EMF, all commands except Power(k a) and Key(m c) yy are not executed and treated as NG. CONTROLLING THE MULTIPLE PRODUCT 75 Transmission / Receiving protocol [Command1][Command2][ ][Set ID][ ][Data][Cr] * [Command1]: First command to control the set. * [Command2]: Second command to control the set. * [Set ID]: Set ID with which you want to communicate. Enter [Set ID] = ‘00(0x00’ to communicate with all sets regardless of their Set ID numbers. * [Data]: Information passed to the set. * [Data1]: Information passed to the set. * [Data2]: Information passed to the set. * [Data3]: Information passed to the set. * [Cr]: Carriage Return. ASCII code ‘0x0D’. * [ ]: ASCII code space ‘0x20’ Acknowledgement [Command2][ ][Set ID][ ][OK/NG][Data][x] * When the product receives data normally, it sends an acknowledgement (ACK) in the format above. If data is in read mode, it indicates the data that shows the current status. If data is in read mode, it simply indicates the data that is sent from the PC. * If a command is sent with Set ID '00' (=0x00), the data is reflected to all monitor sets and they do send any acknowledgement (ACK). * If the data value 'FF' is sent in control mode via RS-232C, the current setting value of a function can be checked (only for some functions). * Some commands are not supported depending on the model. ENG ENGLISH Transmission 76 CONTROLLING THE MULTIPLE PRODUCT 01. Power (Command: k a) To control the Power On/Off the display. ENGLISH ENG Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 00 : Off 01 : On Acknowledgement [a][ ][Set ID][ ][OK/NG][Data][x] * Only when the monitor set is fully powered on, the Acknowledgement signal is returned properly. * There may be a certain time of delay between the Transmission and Acknowledgement signals. 04. Energy Saving (Command: j q) To set the Energy Saving function. Transmission [j][q][ ][Set ID][ ][Data][Cr] Data 00: Off 01: Minimum 02: Medium 03. Maximum 04: Auto 05. Screen Off Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x] ** It may not be supported depending on the model. 02. Input Select (Command: x b) To select the Input Source for display. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data 20: Input (AV) 40: Component 60: RGB 70: DVI-D(PC) 80: DVI-D(DTV) 90: HDMI(HDMI1)(DTV) A0: HDMI(HDMI1)(PC) C0: Display Port(DTV) D0: Display Port(PC) 91: HDMI2/SDI(DTV) A1: HDMI2/SDI(PC) B0: SuperSign Acknowledgement [b][ ][Set ID][ ][OK/NG][Data][x] 05. Picture Mode (Command: d x) To select the Picture Mode. Transmission [d][x][ ][Set ID][ ][Data][Cr] Data 00: Vivid 01: Standard 02. Cinema 03. Sport 04: Game Acknowledgement [x][ ][Set ID][ ][OK/NG][Data][x] * Some input signals may not be supported depending on the model. 03. Aspect Ratio (Command: k c) To adjust the screen format. Transmission [k][c][ ][Set ID][ ][Data][Cr] Data 01: 4:3 02: 16:9 04: Zoom 09: Just scan (720p or more) (Component, HDMI/ DVI-D/ Display Port DTV) * RGB, DVI-D, HDMI/Display Port PC mode (1:1) 10 to 1F: Cinema Zoom 1 to 16 (AV, Component, HDMI DTV) * Available data types differ depending on the input signal. For more information, see the aspect ratio section of the owner's manual. * The aspect ratio may differ depending on the model's input configuration. Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x] 06. Contrast (Command: k g) To adjust the screen contrast. Transmission [k][g][ ][Set ID][ ][Data][Cr] Data 00 to 64: Contrast 0 to 100 Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] CONTROLLING THE MULTIPLE PRODUCT 07. Brightness (Command: k h) To adjust the screen brightness. Data 00 to 64: Brightness 0 to 100 Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 08. Sharpness (Command: k k) To adjust the screen sharpness. * This function is available only in AV/Component input. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data 00 to 64: Sharpness 0 to 100 Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] 09. Color (Command: k i) To adjust the screen color. * This function is available only in AV/Component input. Transmission [k][i][ ][Set ID][ ][Data][Cr] Data 00 to 64: Color 0 to 100 Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x] 10. Tint (Command: k j) To adjust the screen tint. * This function is available only in AV/Component input. Transmission [k][j][ ][Set ID][ ][Data][Cr] Data 00 to 64: Tint R50 to G50 Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x] 11. Color Temperature (Command: x u) To adjust the screen Color Temperature. Transmission [x][u][ ][Set ID][ ][Data][Cr] Data 00 to 64: Warm 50 to Cool 50 Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] 12. H Position (Command: f q) To adjust the screen Horizontal Position. * This function is available only when the Tile Mode is set to Off. * The operational range varies depending on the RGB input resolution. (Only available for RGB-PC input.) Transmission [f][q][ ][Set ID][ ][Data][Cr] Data 00 to 64: min. -50 (Left) to max. 50 (Right) Acknowledgement [q][ ][Set ID][ ][OK/NG][Data][x] ENG ENGLISH Transmission [k][h][ ][Set ID][ ][Data][Cr] 77 78 CONTROLLING THE MULTIPLE PRODUCT ENGLISH ENG 13. V Position (Command: f r) To adjust the screen Vertical Position. * This function is available only when the Tile Mode is set to Off. * The operational range varies depending on the RGB input resolution. (Only available for RGB-PC input.) Transmission [f][r][ ][Set ID][ ][Data][Cr] 16. Balance (Command: k t) To adjust the sound balance. Transmission [k][t][ ][Set ID][ ][Data][Cr] Data 00 to 64: Left 50 to Right 50 Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x] 00 to 64: min. -50 (Bottom) to max. 50 (Top) Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x] 14. H Size (Command: f s) To adjust the screen Horizontal Size. * This function is available only when the Tile Mode is set to Off. * The operational range varies depending on the RGB input resolution. (Only available for RGB-PC input.) Transmission [f][s][ ][Set ID][ ][Data][Cr] Data 00 - 64: Min. -50 (Reduce) - Max. 50 (Expand) Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x] 15. Auto Configuration (Command: j u) To adjust the picture position and minimize image shaking automatically. (Only available for RGB-PC input.) Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : Set Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] 17. Sound Mode (Command: d y) To select the Sound Mode. Transmission [d][y][ ][Set ID][ ][Data][Cr] Data 01: Standard 02: Music 03: Cinema 04: Sport 05. Game Acknowledgement [y][ ][Set ID][ ][OK/NG][Data][x] 18. Treble (Command: k r) To adjust the Treble values. Transmission [k][r][ ][Set ID][ ][Data][Cr] Data 00 to 64: Treble 0 to 100 Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x] CONTROLLING THE MULTIPLE PRODUCT 19. Bass (Command: k s) To adjust the Bass values. Data 00 to 64: Bass 0 to 100 Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x] 20. Speaker (Command: d v) To select the speaker on/off. Transmission [d][v][ ][Set ID][ ][Data][Cr] Data00: Off 01: On Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] 22. Volume Control (Command: k f) To set the playback volume. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data 00 to 64: Volume 0 to 100 Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x] 23. Time 1(Year/ Month/ Day) (Command: f a) To set the Time 1(Year/ Month/ Day) values. Transmission [f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data 100 to 14: 2010 to 2030 Data 201 to 0C: January to December Data 301 to 1F: 1 to 31 * Enter “fa [Set ID] ff” for checking Time 1(Year/ Month/ Day) values. Acknowledgement [a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] 21. Volume Mute (Command: k e) To control the Volume Mute on/off. Transmission [k][e][ ][Set ID][ ][Data][Cr] Data 00 : Mute (Volume Off) 01 : Current volume (Volume On) Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x] 24. Time 2(Hour/ Minute/ Second) (Command: f x) To set the Time 2(Hour/ Minute/ Second) values. Transmission [f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 00 to 17: 00 to 23 hours Data2 00 to 3B: 00 to 59 minutes Data3 00 to 3B: 00 to 59 seconds * Enter “fx [Set ID] ff” for checking Time 2(Hour/ Minute/ Second) values. ** This command won’t work if Time 1(Year/ Month/ Day) has not been set in advance. Acknowledgement [x][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] ENG ENGLISH Transmission [k][s][ ][Set ID][ ][Data][Cr] 79 80 CONTROLLING THE MULTIPLE PRODUCT ENGLISH ENG 25. Off Timer(Repeat Mode/ Time) (Command: f e) To set the Off Timer(Repeat Mode/ Time) function. 26. On Timer(Repeat Mode/ Time) (Command: f d) To set the On Timer(Repeat mode/ Time) function. Transmission [f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Transmission [f][d][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] Data1 1. f1h to f7h (Read data) F1: Read the 1st Off Time data F2: Read the 2nd Off Time data F3: Read the 3rd Off Time data F4: Read the 4th Off Time data F5: Read the 5th Off Time data F6: Read the 6th Off Time data F7: Read the 7th Off Time data 2. e1h-e7h (Delete one index), e0h (Delete all indexes) E0: Delete all Off Time data E1: Delete the 1st Off Time data E2: Delete the 2nd Off Time data E3: Delete the 3rd Off Time data E4: Delete the 4th Off Time data E5: Delete the 5th Off Time data E6: Delete the 6th Off Time data E7: Delete the 7th Off Time data 3. 01h to 06h (Set the day of week for Off Time) 00: Off 01: Once 02. Daily 03: Monday to Friday 04: Monday to Saturday 05: Saturday to Sunday 06. Sunday 07. Monday 08. Tuesday 09. Wednesday 0A. Thursday 0B. Friday 0C. Saturday Data2 00 to 17: 00 to 23 Hours Data3 00 to 3B: 00 to 59 Minutes * To read or delete the Off Time list, set FFH for [Data2] and [Data3]. (Example 1: fe 01 f1 ff ff - Read the 1st Off Time data.) (Example 2: fe 01 e1 ff ff - Delete the 1st Off Time data.) (Example 3: fe 01 04 02 03 - Set the Off Time to "Monday to Saturday, 02:03".) * This function is supported only when 1 (Year/Month/ Day) and 2 (Hour/Minute/Second) are set. Acknowledgement [e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] Data1 1. f1h to f7h (Read data) F1: Read the 1st On Time data F2: Read the 2nd On Time data F3: Read the 3rd On Time data F4: Read the 4th On Time data F5: Read the 5th On Time data F6: Read the 6th On Time data F7: Read the 7th On Time data 2. e1h-e7h (Delete one index), e0h (Delete all indexes) E0: Delete all On Time data E1: Delete the 1st On Time data E2: Delete the 2nd On Time data E3: Delete the 3rd On Time data E4: Delete the 4th On Time data E5: Delete the 5th On Time data E6: Delete the 6th On Time data E7: Delete the 7th On Time data 3. 01h to 06h (Set the day of week for On Time) 00: Off 01: Once 02. Daily 03: Monday to Friday 04: Monday to Saturday 05: Saturday to Sunday 06. Sunday 07. Monday 08. Tuesday 09. Wednesday 0A. Thursday 0B. Friday 0C. Saturday Data2 00 to 17: 00 to 23 Hours Data3 00 to 3B: 00 to 59 Minutes * To read or delete the Off Time list, set FFH for [Data2] and [Data3]. (Example 1: fd 01 f1 ff ff - Read the 1st On Time data.) (Example 2: fd 01 e1 ff ff - Delete the 1st On Time data.) (Example 3: fd 01 04 02 03 - Set the On Time to "Monday to Saturday, 02:03".) * This function is supported only when 1 (Year/Month/ Day) and 2 (Hour/Minute/Second) are set. Acknowledgement [d][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] CONTROLLING THE MULTIPLE PRODUCT Transmission [f][u][ ][Set ID][ ][Data1][Cr] [f][u][ ][Set ID][ ][Data1][Data2][Cr] Data (Add schedule) 20: Input (AV) 40: Component 60. RGB 70: DVI-D 90: HDMI (HDMI1) C0: Display Port 91: HDMI2/SDI B0:SuperSign Data1 (Change schedule) 1. f1h to f4h (Read data) F1: Select the 1st schedule input F2: Select the 2nd schedule input F3: Select the 3rd schedule input F4: Select the 4th schedule input F5: Select the 5th schedule input F6: Select the 6th schedule input F7: Select the 7th schedule input Data2 20: Input (AV) 40: Component 60: RGB 70: DVI-D 90: HDMI (HDMI1) C0: Display Port 91: HDMI2/SDI B0:SuperSign * To read the schedule input, enter FFH for [Data2]. (Example 1: fu 01 60 - Move each schedule input down one row and save the 1st schedule input in RGB mode.) (Example 2: fu 01 f1 ff - Read the 1st schedule input.) (Example 3: fu 01 f3 20 - Change the 3rd data schedule input to the current On Time and AV input.) * This function is supported only when 1 (Year/Month/ Day), 2 (Hour/Minute/Second), On Time (Repeat Mode/Time) are set. ** It may not be supported depending on the model. Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x] [u][ ][Set ID][ ][OK/NG][Data1][Data2][x] 28. Sleep Time (Command: f f) To set the Sleep Time. Transmission [f][f][ ][Set ID][ ][Data][Cr] Data 00: Off (Sleep Timer off) 01: 10 min. 02: 20 min. 03: 30 min. 04: 60 min. 05: 90 min. 06: 120 min. 07: 180 min. 08: 240 min. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x] 29. Power On Delay (Command: f h) To set the schedule delay when the power is turned on. (Unit: Second) Transmission [f][h][ ][Set ID][ ][Data][Cr] Data 00 to 64: min. 0 to max. 100 (sec.) Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 30. Automatic Standby (Command: m n) To set the Automatic Standby function. Transmission [m][n][ ][Set ID][ ][Data][Cr] Data 00: Off (No off after 4 hours) 01: 4 Hours (Off after 4 hours) Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] ENG ENGLISH 27. On Timer Input (Command: f u) To select an external input for the current On Time setting and add a new schedule or change the existing schedule. 81 82 CONTROLLING THE MULTIPLE PRODUCT 31. Auto Off (Command: f g) To set the Auto Off function. ENGLISH ENG Transmission [f][g][ ][Set ID][ ][Data][Cr] Data 00: Off (No off after 15 minutes) 01: 15 min.(Off after 15 minutes) Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] 32. Language (Command: f i) To set the language for OSD. Transmission [f][i][ ][Set ID][ ][Data][Cr] Data 00: Czech 01: Danish 02: German 03: English 04: Spanish (EU) 05: Greek 06: French 07: Italian 08: Dutch 09: Norwegian 0A: Portuguese 0B: Portuguese (BR) 0C: Russian 0D: Finnish 0E: Swedish 0F: Korean 10: Chinese (Mandarin) 11: Japanese 12: Yue Chinese (Cantonese) 34. Power Indicator (Power Light) (Command: f p) To set the Power Indicator (Power Light) function. Transmission [f][p][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On ** It may not be supported depending on the model. Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x] 35. ISM mode (Command: j p) To select ISM method for avoiding having a fixed image remain on screen. Transmission [j][p][ ][Set ID][ ][Data][Cr] Data 01: Inversion 02: Orbiter 04: White Wash 08. Normal Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x] 33. Power Indicator (Standby Light) (Command: f o) To set the Power Indicator (Standby Light) function. Transmission [f][o][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On ** It may not be supported depending on the model. Acknowledgement [o][ ][Set ID][ ][OK/NG][Data][x] 36. Fail Over Select (Command: m i) To set the Fail Over function. Transmission [m][i][ ][Set ID][ ][Data][Cr] Data 00: Off 01: Auto 02: Manual Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x] CONTROLLING THE MULTIPLE PRODUCT Transmission [m][j][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [ ][Data4][ ][Data5][Cr] Data 1 to 5 (Priority 1 to 5) 60: RGB 70: DVI-D 90: HDMI(HDMI1) C0: Display Port 91: HDMI2/SDI * The number of data items differs depending on the model. 40. Tile Mode Check (Command: d z) To check Tile Mode status. Transmission [d][z][ ][Set ID][ ][Data][Cr] Data FF: Check Tile Mode status. ** It may not be supported depending on the model. Acknowledgement [z][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] Data1 Data2 Data3 00: Tile Mode Off 01: Tile Mode On 00 to 0F: Tile Row 00 to 0F: Tile Column Acknowledgement [j][ ][SetID][ ][OK/NG][Data1][Data2][Data3][Data4] [ ][Data5][x] Data 1 to 5 (Priority 1 to 5) 60: RGB 70: DVI-D 90: HDMI(HDMI1) C0: Display Port 91: HDMI2/SDI * The number of data items differs depending on the model. 38. Reset (Command: f k) To execute the Picture, Screen, Audio and Factory reset function. 41. Tile ID (Command: d i) To set Tile ID. Transmission [d][i][ ][Set ID][ ][Data][Cr] Data 01 to E1: Tile ID 01 to 225** FF: Check Tile ID ** Data could not be set over (Tile Column) x (Tile Row). ** It may not be supported depending on the model. Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x] *NG will be return if data is over (Tile Column) x (Tile Row), except 0xFF. Transmission [f][k][ ][Set ID][ ][Data][Cr] Data 00: Picture Reset 01: Screen Reset 02: Factory Reset 03: Audio Reset Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] 39. Tile Mode (Command: d d) To set a Tile Mode and Tile Column/ Row values. Transmission [d][d][ ][Set ID][ ][Data][Cr] Data 00 to FF: 1st byte - Tile Row 2nd byte - Tile Column *00, 01, 10, 11 means Tile Mode Off. Acknowledgement [d][ ][Set ID][ ][OK/NG][Data][x] ** It may not be supported depending on the model. 42. Tile H Position (Command: d e) To adjust the Tile Horizontal position. * This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On. Transmission [d][e][ ][Set ID][ ][Data][Cr] Data 00 to 32: -50 (Left) to 0 (Right) *Left/Right values depend on Tile H size. ** It may not be supported depending on the model. Acknowledgement [e][ ][Set ID][ ][OK/NG][Data][x] ENG ENGLISH 37. Fail Over Input Select (Command: m j) To select the input source for auto switch. * This command is only available when the fail over (auto) mode is set to Custom. 83 84 CONTROLLING THE MULTIPLE PRODUCT ENGLISH ENG 43. Tile V Position (Command: d f) To adjust the Tile Vertical position. * This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On. Transmission [d][f][ ][Set ID][ ][Data][Cr] Data 0 to 32: 0 (Bottom) to 50 (Top) * Bottom/Top values depend on Tile Vertical size. ** It may not be supported depending on the model. Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x] 44. Tile H Size (Command: d g) To adjust the Tile Horizontal Size. *Set Tile H Position to 0x32 before setting Tile H Size. * This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On. Transmission [d][g][ ][Set ID][ ][Data][Cr] Data 00 to 32: 0 to 50 ** It may not be supported depending on the model. 46. Natural Mode (In Tile Mode) (Command : d j) To display the image naturally, the part of the image that would normally be displayed in the gap between the monitors is omitted. Transmission [d][j][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x] 47. DPM Select (Command: f j) To set the DPM (Display Power Management) function. Transmission [f][j][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement [g][ ][Set ID][ ][OK/NG][Data][x] 45. Tile V Size (Command: d h) To adjust the Tile Vertical size. *Set Tile V Position to 0x00 before setting Tile V Size. * This function is available only when the Natural option of the Tile Mode is set to Off while the Tile Mode set to On. Transmission [d][h][ ][Set ID][ ][Data][Cr] Data 00 to 32: 0 to 50 ** It may not be supported depending on the model. Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] 48. FAN Control (Command : d o) To set the Fan mode. Transmission [d][o][ ][Set ID][ ][Data][Cr] Data 00: Auto 01: On 02: Manual 03: Off ** It may not be supported depending on the model. Acknowledgement [o][ ][Set ID][ ][OK/NG][Data][x] CONTROLLING THE MULTIPLE PRODUCT 49. FAN Fault Check (Command: d w) To check the fan errors. Data FF: Read the status Acknowledgement [w][ ][Set ID][ ][OK/NG][Data][x] Data 00: Fan fault 01: Fan OK 02: Model without a Fan 50. Temperature Value (Command: d n) To check the inside temperature value. Transmission [d][n][ ][Set ID][ ][Data][Cr] Data FF: Check the status Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] * Temperature is displayed in hexadecimal. 51. Remote Controller Lock/ Key Lock (Command: k m) When the remote control and front keys are locked in standby mode, the power cannot be turned on using the remote control or front power button. Transmission [k][m][ ][Set ID][ ][Data][Cr] Data 00: Off (Lock Off) 01: On (Lock On) * Display will not be turned on by power on key of remote controller and front panel control keys, if key is locked on in standby mode. Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] 52. Key (Command: m c) To send a key code of the IR remote control. Transmission [m][c][ ][Set ID][ ][Data][Cr] Data IR_KEY_CODE Acknowledgement [c][ ][Set ID][ ][OK/NG][Data][x] For a key code, see the IR Code. * Some key codes are not supported depending on the model. 53. OSD Select (Command: k l) To select OSD(On Screen Display) on/off. Transmission [k][l][ ][Set ID][ ][Data][Cr] Data 00: Off 01: On Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] 54. Elapsed time return (Command: d l) To check the panel used time. Transmission [d][l][ ][Set ID][ ][Data][Cr] Data FF: Read the status Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] * Returned data means used hours in hexadecimal. ENG ENGLISH Transmission [d][w][ ][Set ID][ ][Data][Cr] 85 86 CONTROLLING THE MULTIPLE PRODUCT 55. Serial No.Check (Command: f y) To check the Serial Numbers. ENGLISH ENG Transmission [f][y][ ][Set ID][ ][Data][Cr] Data FF: Check the product Serial Number Acknowledgement [y][ ][Set ID][ ][OK/NG][Data][x] 58. White Balance Green Gain (Command: j n) To set the White Balance Green Gain. Transmission [j][n][ ][Set ID][ ][Data][Cr] Data 00 to FE: Green Gain 0 to 254 Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] * Data is ASCII code. 56. S/W Version (Command: f z) To check the Software Version. Transmission [f][z][ ][Set ID][ ][Data][Cr] Data FF: Check the Software version Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x] 57. White Balance Red Gain (Command: j m) To set the White Balance Red Gain. Transmission [j][m][ ][Set ID][ ][Data][Cr] Data 00 to FE: Red Gain 0 to 254 Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x] 59. White Balance Blue Gain (Command: j o) To set the White Balance Blue Gain. Transmission [j][o][ ][Set ID][ ][Data][Cr] Data 00 to FE: Blue Gain 0 to 254 Acknowledgement [o][ ][Set ID][ ][OK/NG][Data][x] 60. Backlight (Command: m g) To adjust the screen backlight. Transmission [m][g][ ][Set ID][ ][Data][Cr] Data 00 to 64: Backlight 0 to 100 Acknowledgement [g][][set ID][][OK/NG][Data][x] ** It may not be supported depending on the model. CONTROLLING THE MULTIPLE PRODUCT Transmission [d][t][ ][Set ID][ ][Data][Cr] Data 00: Synchronized (When the monitor is off, the PC is also turned off.) 01: Not synchronized (The monitor is off but the PC is on.) ** It may not be supported depending on the model. Acknowledgement [t][ ][Set ID][ ][OK][Data][x] Data 00: Synchronized (When the monitor is off, the PC is also turned off.) 01: Not synchronized (The monitor is off but the PC is on.) 62. PC Power (Command: d s) To control the PC power when the PC and the monitor are not synchronized. Transmission [d][s][ ][Set ID][ ][Data][Cr] Data 00: PC it turned off. 01: PC is turned on. ** It may not be supported depending on the model. Acknowledgement [s][ ][Set ID][ ][OK][Data][x] Data 00: PC it turned off. 01: PC is turned on. ENG ENGLISH 61. PC Power Control (Command: d t) To control the PC power if the PC and the monitor are synchronized. 87 Make sure to read the Safety Precautions before using the product. Keep the Owner's Manual(CD) in an accessible place for future reference. The model and serial number of the SET is located on the back and one side of the SET. Record it below should you ever need service. MODEL SERIAL To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this product, please visit http:// opensource.lge.com. In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to [email protected]. This offer is valid for three (3) years from the date on which you purchased the product. Temporary noise is normal when powering ON or OFF this device.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Key Features
- Digital signage flat panel Black
- 119.4 cm (47") 1920 x 1080 pixels LED 700 cd/m²
- 12 ms
- Ethernet LAN
- Built-in speaker(s) 20 W
Related manuals
advertisement