LG WD-10WD Owner's manual

Washing
Machine
OWNER'S MANUAL
WD(M)-1374(6)F(H)B
WD(M)-1274(6)F(H)B
WD(M)-1174(6)F(H)B
WD(M)-1074(6)F(H)B
WD(M)-8074F(H)B
Thank you for buying a
LG Fully Automatic Washing machine.
Please read your owner's manual carefully, it provides
on safe installation, use and maintenance.
instructions
Retain it for future reference.
Record the model and serial numbers of your
washing
machine.
P/No.: 3828ER3009L
P
roduct Feature
40%
?
Jumbo drum
LG's
jumbo
drum
conventional
can
wash about 40%
machines. A
washing
more
bigger
load than
drum
improves
the wash
performance.
?
More economical
Intelligent
Wash
by Intelligent Wash System
System
detects the amount of load and water
temperature, and then determines the optimum
time to minimize energy and water
washing
?
Child-Lock
The Child-Lock
pressing
?
system has been used
any button to
Low noise
change
to
prevent children from
the program
during operation.
speed control system
the amount of load and balance, it
load to minimize the spinning noise level.
By sensing
?
water level and
consumption.
evenly
distributes
Auto Restart
If the washing machine is turned off by a power failure, it will restart
automatically from the position it stopped at adjusting accordingly.
C
ontents
Warnings....................................................................................3
Specification
..............................................................................4
Installation..................................................................................5
Care before
washing................................................................11
Adding detergent
.....................................................................12
Function ...................................................................................13
How to
use
washer ..................................................................14
Maintenance ............................................................................21
Troubleshooting guide
2
.............................................................24
W arnings
READ ALL INSTRUCTIONS BEFORE USE
For your safety, the information in this manual must be followed to minimize
the risk of fire or explosion, electric shock, or to prevent property damage,
personal injury, or loss of life.
WARNING!
!
IMPORTANT SAFETY INSTRUCTIONS
WARNING : To reduce the risk of fire, electric shock,
the washer, follow basic
?
Do not install
be
?
?
or
or injury
precautions, including the following:
store the washer where it will
?
tamper with controls.
repair or replace any part of the washer
attempt any servicing unless specifically
recommended in the user-maintenance
instructions
or
published user-repair instructions
?
that you understand and have the skills to carry
Keep the area underneath and around your
appliances free of combustible materials such
lint, paper, rags, chemicals,
?
?
?
have been
or
etc.
Do not leave the washer door open.
An open door could entice children to
or
hang
Never reach into washer while it is
laundry process
retardant of fabrics.
can
Wait
reduce the flame
or
try to
possibility of electric shock,
unplug this appliance from the power supply
To minimize the
or
disconnect the washer at the household
panel by removing the fuse or
switching off the circuit breaker before
attempting any maintenance or cleaning.
Never attempt to operate this appliance if it is
damaged, malfunctioning, partially
disassembled, or has missing or broken parts,
including a damaged cord or plug.
distribution
?
moving.
completely stopped.
The
?
on
crawl inside the washer.
Do not slam the washer door closed
force the door open when locked. This could
result in damage to the washer.
as
supervision is necessary if this appliance
is used by or near children.
Do not allow children to play on, with, or inside
this or any other appliance.
until the drum has
?
?
Close
the door
dry articles that
instructions.
out.
?
or
or spotted with
explosive substances (such as
wax, oil, paint, gasoline, degreasers, drycleaning solvents, kerosene, etc.) which may
ignite or explode.
To avoid such a result, carefully follow the
garment manufacturer's wash and care
combustible
Do not
or
Do not wash
using
cleaned in, washed in, soaked in,
exposed to the weather.
Do not
to persons when
SAVE THESE INSTRUCTIONS
GROUNDING INSTRUCTIONS
grounded. In the event of malfunction or breakdown, grounding will reduce the risk
by providing a path of least resistance for electric current. This appliance is equipped with
a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinance.
Do not use an adapter or otherwise defeat the grounding plug.
This
appliance
must be
of electric shock
?
?
If you don't have the proper outlet, consult
WARNING :
an
electrician.
connection of the equipment-grounding conductor can result in risk of electric
qualified electrician or serviceman if you are in doubt as to whether the appliance is
properly grounded. Do not modify the plug provided with the appliance if it does not fit the outlet, have a
proper outlet installed by a qualified electrician.
Improper
shock. Check with
a
-
3
S pecification
Power
plug
If the
it
supply cord is damaged,
must be replaced by the
or its service agents
similarly qualified person in
manufacturer
Drawer
or a
(For detergent and
fabric softener)
order to avoid
Control
a
hazard.
panel
Drain hose
Door
Lower
cover
Drum
Adjustable
Drain pump filter
Lower
Drain
Name
?
Power
supply
:
Front
:
220-240V~,50/60Hz
?
Size
:
?
Weight / Max.Watt
Wash capacity
Spin speed
:
?
?
Water
?
Permissible water pressure
consumption
The appearance and
?
loading washing
cap
machine
600mm(W) 600mm(D) 850mm(H)
63kg / 2100W
: 7.0kg
: No Spin/400/600/800[WD(M)-8074F(H)B]
No Spin/400/600/800/1000[WD(M)-1074(6)F(H)B]
No Spin/400/600/800/1100[WD(M)-1174(6)F(H)B]
No Spin/400/600/800/1000/1200[WD(M)-1274(6)F(H)B]
No Spin/400/600/800/1100/1300[WD(M)-1374(6)F(H)B]
:75 (10.7 /kg)
: 0.3-10kgf/
(30-1000kPa)
specifications
may be varied without notice to raise the units
Accessories
Inlet
4
cover
plug
?
?
feet
hose(1EA)
Option
:
Hot/Cold(2EA)
Spanner
quality.
nstallation
I
or store where it will not be exposed to temperatures below freezing or exposed to the weather.
Properly ground washer to conform with all governing codes and ordinances.
The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
Install
Transit bolts
?
The
appliance
is fitted with transit bolts to
Removing
?
prevent internal damage during transport.
transit bolts
1. To
prevent internal damage during
transport, the special 4 bolts are locked.
Before operating the washer, remove
the bolts
along
with the rubber
3. Take out the 4 bolts
along with the rubber
bungs by slightly twisting the bung. Keep
the 4 bolts and the spanner for future
?
?
If
they
are
not
removed, it may
use.
bungs.
cause
heavy
Whenever the
appliance
is
transported,
the
transit bolts must be refitted.
vibration, noise and malfunction.
cap
2. Unscrew the 4 bolts with
the spanner
4. Close the holes with the caps
supplied.
supplied.
5
I
?
nstallation
Installation place requirement
Level floor
Drain Hose
Allowable
Washer
:
slope
Power outlet
under entire washer is 1˚
:
Must be within 1.5 meters of either side of location
of washer. Do not overload the outlet with more
than
Laundry
one
appliance.
Additional Clearance :
For wall, door and floor modeling is
Tub
approx.
2cm
(10cm
: rear
Do not
place
/2cm:right
or
store
& left
required.
side)
laundry products
washer at any times.
They can damage the finish
or
on
top of
controls.
650
850
600
?
BS
Plug Safety Details (For
U.K.
User)
IMPORTANT
THE WIRES IN THIS MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN AND YELLOW: EARTH
BLUE: NEUTRAL
BROWN: LIVE
This
appliance
Green and Yellow(Earth)
must be earthed
E
Brown(Live)
L
Blue(Neutral)
Fuse
N
Cord
grip
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured markings
the terminals in your plug, proceed as follows:
The wire which is coloured Green and Yellow must be connected to the terminal in the plug which is marked with the
letter E or by the earth symbol (
) or coloured Green or Green and Yellow.
The wire which is coloured Blue must be connected to the terminal which is marked with the letter N or coloured Black.
The wire which is coloured Brown must be connected to the terminal which is marked with the letter L or coloured Red.
If a 13 amp (BS 1363) plug is used, fit a 13 amp BS 1362 fuse.
identifying
6
nstallation
I
?
Electrical connection
1. Do not
use an extension cord or double adapter.
supply cord is damaged, it must be replaced by the
or similarly qualified person in order to avoid a hazard.
Always unplug the machine and turn off the water supply
2. If the
3.
4. Connect the machine to
5. The
?
appliance
must be
Washing Machine
an
manufacturer
after
so
that the
plug
is
its service agents
use.
earthed socket in accordance with current
positioned
or
wiring regulations.
accessible.
easily
is to be connected to the water mains
using
new
hose-
sets and that old hose-sets should not be used.
?
Connecting
water
supply hose
Water supply pressure must be between
30kPa and 1000kPa (0.3~10kg.f/cm2)
Don't
strip or crossthread when connecting
Inlet hose
to
the valve.
If the water supply pressure is more than
1000kPa, a decompression device should be
installed.
?
Two rubber seals
are
supplied with
the
water inlet hoses these are in order to
prevent
?
Hose connector
Rubber seal
water leaks.
Check water tightness of washing
machine connections by turning the tap
completely
?
on.
Periodically check the condition of the
replace the hose if necessary.
hose and
?
When your washer has
Hot water tap
?
Cold
Hot(option)
Make sure that there is no kink
hose and that it is not crushed.
Cold
water
tap
?
two
on
the
valves,
The Inlet hose which has red connector is
for the hot water tap.
If the washer has two valves, the energy
is saved by using hot valve.
7
nstallation
I
?
Normal Tap without thread &
1. Unscrew the fixing
attach the tap.
screw
to
2.
screw
type inlet hose
Push the connector up till the
rubber
packing
3.
is in
with the tap. Then
tight contact
tighten the 4
screws.
?
Normal Tap without thread &
1. Untighten the upper
connector
2.
touch type inlet hose
one
Push the upper connector up till
the rubber packing is in tight
screw.
contact with the
Upper
Rubber
Connector
Fixing
screw
tighten
packing
Middle
connector
the 4
Rubber
Push the water supply hose
vertically upwards so that the
rubber packing within in the
hose can adhere completely to
the tap and then tighten it by
screwing it to the right.
3. Connect the
water
supply
hose
to the middle connector,
tap. Then
pushing
the
plate
down.
screws.
Upper
Connector
packing
Plate
Upper
?
In
case
large
the diameter of the tap is
the guide plate.
Connector
Guide
Water
Middle
connector
remove
plate
?
hose
Turn the middle connector not
to have water leaked.
Connector
?
Make
sure
that the rubber seal
is inside the hose connector.
?
To
supply
separate the
water
supply
hose from the middle connector
shut off the tap. Then pull the
inlet hose down, pushing the
plate
down.
Hose connector
Rubber seal
Used the horizontal
Horizontal tap
tap
?
Your machine
comes
with
only
cold water connection.
?
Extension tap
Make
sure
that there
not crushed.
Square tap
8
are no
kinks in the hose and that it is
I
?
nstallation
Installation of drain hose
ca.
ca.
100 cm
145 cm
?
max.10cm min.60cm
ca.
When
installing the drain hose sink,
it tightly with a string.
secure
105 cm
?
Proper securing the drain hose will protect
damage due to water
leakage.
the floor from
Laundry tub
ca.
100 cm
Hose
ca.
Retainer
145 cm
Tie
100cm
min. 60cm
max.
ca.
?
The drain hose should not be
higher
?
than 100
Proper securing
cm
?
placed
?
above the floor.
the drain hose will
protect the floor from
water
min.60cm max.10 cm
105 cm
damage
due to
leakage.
When the drain hose is too
When
100cm
min. 60cm
max.
strap
installing the drain hose sink,
it tightly with a string.
secure
?
Proper securing the drain hose will protect
damage due to water
leakage.
the floor from
long, please
don't fill into the washer. This will
cause
abnormal noise.
9
I
?
nstallation
Level
adjustment
1.
Adjustable the washing machine
properly prevents excessive noise
and
vibration.
Install the
floor
the
appliance
on a
solid and level
surface, preferably in
of
a corner
room.
2. If the floor is uneven,
feet
adjustable
insert pieces
Make
sure
as
adjust the
required. (do not
of wood etc. under the
that all four feet
are
feet)
stable
and
resting on the floor and then check
appliance is perfectly level. (use
spirit level)
that the
Adjustable feet
Higher
a
Lower
Adjustable feet
Diagonal Check
When pushing down the edges of the
washing machine top plate diagonally,
machine should not
move
the
up and down at
all. (Please, check both of two directions)
If machine rocks when pushing the machine
top plate diagonally, adjust the feet again.
10
C
?
are
before
washing
Caring before washing
1. Care Labels
Look for
garment
2.
label on your clothes. This will tell you about the fabric content of your
and how it should be washed.
a care
Sorting
To
get the best results, Sort clothes into loads that
can
be washed with the
wash
same
cycle.
Water temperature and spin speed and different fabrics need to be washed in different ways.
Always sort dark colors from pale colors and whites. Wash separately as dye and lint
transfer
Soil
causing discoloration
lightly soiled one.
can occur
soiled items with
(Heavy, Normal, Light)
(White, Lights, Darks)
(Lint producers, Collectors)
Color
Lint
3.
Caring
?
before
of white etc. If
possible,
do not wash
heavily
Separate clothes according to amount of soil.
Separate white fabrics from colored fabrics.
Wash lint producers and lint collectors
separately.
loading
Combine large and small items in a load. Load large items first. Large items should not be more
than half the total wash load.
Do not wash single items. This may cause an out-of-balance load. Add one or two similar items.
?
Check all the
that
as
pockets
to make sure
empty. Things such
nails, hair clip, matches, pens,
they
are
coins and
keys
can
damage
both
your washer and your clothes.
?
Close
zippers,
make
sure
snag
?
on
hook and
little
to
other clothes.
Pre treat dirt and stains
a
strings
that these items don't
detergent
by brushing
dissolved in water
onto stains like collars and cuffs to
help
shift dirt.
11
A dding detergent
?
Adding detergent and fabric softener
1. The Dispenser Drawer
3. Detergent
?
The
dosage
detergent should be used according to
of the detergent manufacture.
the
instruction
max
?
If too
much
detergent is
recommended amount,
occur
used more than the
many suds can
and this will decrease the washing result
too
heavy load to the
malfunction)
or cause
?
Use powder
loading
?
Main wash
only
U
?
(Causing
a
detergent only for the front
washer.
Detergent usage
for water
?PreWash+MainWashU
motor.
may need to be
temperature,
water
adjusted
hardness,
size and soil level of the load. For best
2.
results, avoid oversudsing.
Adding Fabric Softener
(
)
MAX
MAX
125 ml
125ml
Tips
Full load
Part load
?
Do not exceed the maximum fill line.
Overfilling
can cause
clothes.
Do not leave the fabric softener in the
Softener will
during
?
automatically
cycle.
2
days.
be added
last rinse
Do not open the drawer when water is
supplied.
?
Solvents(benzene, etc)
are
not
allowable.
NOTE
Do not pour fabric softener
directly
12
on
:
3/4 of the normal amount.
Minimum load
?
:
1/2 of full load.
Detergent is flushed from the dispenser
beginning of the cycle.
the
detergent drawer for more than
(Fabric softener could harden)
?
to
early dispensing
of the fabric softener which could stain
?
according
:
manufacturer's recommendation.
the clothes
at
unction
F
?
Recommended
courses
Fabric
according
Temp.
First check if
laundry is machine
washable.
(white cotton, linen
towel and
Eco
(60˚C, 50˚C,
Rinse+
40˚C)
Bio
sheets...)
(shirts, night dresses,
Synthetic Polyamide, Acryic,
Polyester
Delicate laundry
easily damaged
(silk, curtains...)
Machine washable
woolens with pure
new wool only
Hand
"Hand Wash"
Wash
marked delicate and
wool
Pre Wash
:
You
:
in
Load
Liter
kWh
Minutes
Rating
85
2.74
158
:
laundry
:
40˚C
Rating
75
0.72
115
40˚C
(50˚C, 60˚C,
Cold, 30˚C)
Less than
58
0.6
88
58
0.41
58
53
0.28
58
51
0.03
57
Eco
Rinse+
Bio
Rapid
Pre Wash
Eco
Rinse+
30˚C
(40˚C, Cold)
Cold(30˚C,
40˚C)
kg
Less than
Rinse+
30˚C
(40˚C, Cold)
4.0
Bio
3.0
kg
Less than
Rinse+
Rinse+
2.0
kg
Less than
2.0
kg
If the
laundry is heavily soiled, "Pre Wash" course is effective. Pre Wash is available in
Coloureds, Whites and Synthetic Program.
If you wish to rinse more, the Rinse+ function will
If you want to elimenate protein stains
by pressing the option button.
can
Time
Pre Wash
By selecting Eco function, the water temperature is reduced and washing
lengthened. So you can economize in your consumption of energy.
Rinse+
Bio
in
Rapid
pajamas...)and
(50˚C, 60˚C,
lightly soiled white Cold, 30˚C)
cotton(underwear...)
Eco
Energy
in
Pre Wash
95˚C
Coloureds Color fast gaments
Wool
Water
Option
Type
Delicate
laundry type
Maximum
Proper
Program
Whites
to the
remove
detergents.
(milk, blood, chocolate...), you may select Bio function
select Bio function and Eco function when temperature is
Coloureds and
any trace of
time is
higher than
60˚C in
Whites,
Synthetic.
13
H
ow
1. For
use
to
use
washer
in the initial
programme
2. Manual
?
Press the Power button to start.
?
?
Press the Start/Pause button.
?
?
Initial condition
-
Wash
:
Only main
-
Rinse
:
3 times
wash
-
Water temperature
:
40˚C
Program : Coloureds
14
Press the Power button to start.
Select the conditions which you want to
use, by pressing each button.
For
selecting the each conditions, please
refer to the page15~page20
?
-Spin:800rpm
-
Selecting
(Coloureds)
Press the Start/Pause button.
H
ow
to
use
(1)
(1)
(2)
(3)
Button
:
Button
:
Button
:
washer
(2)
(3)
(4)
(5)
(6)
By pressing the Option
button, the Option function
can
-
Rinse+
-
Eco
-
Pre Wash
Button
Dial
:
:
Start/Pause
Program
Button
:
Power
By selecting Eco function, the water
temperature is reduced and washing time is
lengthened. So you can economize in your
consumption of energy.
[You can select Eco function when
temperature is higher than 60 C in Whites,
Coloureds and Synthetic.]
4. Pre Wash
1. Bio
?
?
be selected.
Bio
(7)
(8)
(9)
(9)
3. Eco
Option
-
(8)
(4) Child Lock
(5) Button : Time Delay
(6) Button : Rapid
Option
Spin
Temp.
?
(7)
If you want to elimenate protein stains(milk, blood,
chocolate...), you may select Bio function by
pressing the option button.
[You can select Bio function when temperature
higher than 60 C in Whites, Coloureds and
Synthetic.]
?
?
is
If the
laundry
course
is
heavily soiled,
Pre Wash is available in
Coloureds and
If lamp
"Pre Wash"
is effective.
Whites,
Synthetic.
turns on, that function has been
selected.
2. Rinse+
?
?
If you wish to rinse more, Rinse+ function
will remove any trace of detergents.
By selecting Rinse+ function,
Time and the Rinse water
are
the Rinse
increased.
15
ow
H
to
use
washer
Spin
?
WD(M)-1074(6)F(H)B
Whites / Coloureds/Synthetic
-
800U 1000U Rinse HoldU No
SpinU
-
400U 600
Delicate
400U 600U 800U Rinse HoldU No
-
Spin
Wool / Hand Wash
400U 600U 800U 1000U Rinse HoldU No
[WD(M)-8074F(H)B] [WD(M)-1074(6)F(H)B] [WD(M)-1174(6)F(H)B]
Spin
?
WD(M)-1174(6)F(H)B
-
Whites /
Coloureds/Synthetic
800U 1100U Rinse HoldU No
SpinU
-
400U 600
Delicate
400U 600U 800U Rinse HoldU No
-
Spin
Wool / Hand Wash
400U 600U 800U 1100U Rinse HoldU No
Spin
[WD(M)-1274(6)F(H)B] [WD(M)-1374(6)F(H)B]
?
By pressing
can
the
Spin button,
the
?
spin speed
-
be chosen.
Spin speed
program
as
is available
-
according
-
follows.
16
SpinU
Delicate
400U 600U 800U Rinse HoldU No
Whites / Coloureds / Synthetic
800U Rinse HoldU No SpinU 400U 600
Delicate / Wool / Hand Wash
400U 600U 800U Rinse HoldU No
600
400U 600
WD(M)-8074F(H)B
-
No SpinU 400U
Synthetic
800U 1000U Rinse HoldU No
to the
-
?
Whites / Coloureds
800U 1000U 1200U Rinse HoldU
1. Spin selection
?
WD(M)-1274(6)F(H)B
-
400U 600U 800U 1000U Rinse HoldU No
Spin
Spin
Spin
Wool / Hand Wash
ow
H
to
use
washer
Water Temp.
?
WD(M)-1374(6)F(H)B
-
No
SpinU 400U
Synthetic
600
SpinU
Cold
-30˚C/40˚C/50˚C/60˚C/
400U 600
95˚C
Delicate
400U 600U 800U Rinse HoldU No
-
Temp
selected.
-
800U 1100U Rinse HoldU No
-
the
button, the water
temperature can be
800U 1100U 1300U Rinse HoldU
-
By pressing
?
Whites / Coloureds
Spin
Wool / Hand Wash
400U 600U 800U 1100U Rinse HoldU No
Spin
1. Water Temperature
?
2. No spin
-
?
If
spin is selected,
draining water.
no
If lamp
the washer stops after
-
turns on, that function has been
-
3. Rinse Hold
?
Whites
95˚C U 40˚C
U
Coloureds &
Synthetic
40˚CU 50˚CU
selected.
?
Water temperature can be selected
below according to the program.
-
Hand Wash
U 30˚C
Cold
Selected
from
getting wrinkled, you may select rinse
For the
hold
by pressing
spin
button.
U
60˚CU
60˚C
ColdU 30˚C
Delicate & Wool
30˚C U 40˚C U Cold
If you desire to leave fabrics in the machine
without spinning after rinse to prevent them
the
50˚C
as
U
40˚C
temperature's lamp
more
detailed
turns
on.
information, please refer
to the page13.
If you want to drain and spin, when Rinse
Hold function is proceed, press the
Start/Pause button to cancel the Rinse Hold
function and select
spin speed or program.
again to start
press the Start/Pause button
program.
?
If you want to drain
or
only,
select the
no
spin
pump program.
If lamp
turns on, that function has been selected.
17
H
ow
to
washer
use
Child Lock
Time
Delay
Time Left
If you want to lock all the buttons to prevent
a child or infirm persons, this
operation by
function
can
be used.
1. Child Lock
?
Child Lock
can
be set
button and Time
by pressing the Temp.
Delay button simultaneously.
Time Left
1. Time
Delay
Preparing washing before starting
Delay"
Turn on the water tap.
"Time
-
-
-
Load
laundry and close the door.
detergent and fabric softener
Place the
in
the drawer.
Time Left
?
How to set "Time
-
-
?
?
When child lock is set, all buttons are
To deactivate Child Lock
and Time
Delay
button
inoperable.
system, press Temp.
-
Delay"
Press Power button.
Turn the
Programme dial
to select
the program you require.
Press Time Delay button and set the
desired time.
simultaneously again.
-
Press the Start/Pause button.
(":" blinks.)
Time Left
?
?
If you want to change the program when Child
Lock is active,
1. Press both
Temp.
and Time
Delay together.
19:00 hours and the minimum time is 3:00
hours.
?
2. Press the Start/Pause button.
3.
Change the desired
?
pressing of the button
delay by one hour.
Each
time
program and press the
Start/Pause button.
If Time Delay button is pressed, "3:00" is
displayed. The maximum delayed time is
To cancel the time
advances
delay, press
on
the Power
button.
Change
the desired
?
program
Time
or
?
The child lock
be set at any time and it is
automatically canceled when operational errors
occur. Also Child Lock works when power is off.
'expected time' from the
completion of washing cycle
process (Wash, Rinse, Spin).
Delay
present
selected
can
?
According to
the condition
of water supply and
temperature, the delayed time and the actual
washing time
18
is
to the
may vary.
to
ow
H
washer
use
Start/Pause
Rapid
?
By pressing
the
Rapid
button, Rapid function is
selected.
1. Start
1. Rapid
?
?
?
Rapid function reduces the whole time
including the washing and rinsing time
about by half an hour.
is available in
Rapid
cycle
or
pause the
cycles.
2. Pause
Whites, Coloureds
?
program.
If lamp
This Start/Pause button is used to start
wash
If
temporary stop of wash cycle is needed,
press the Start/Pause button.
turns on, that function has been selected.
?
After the pause button is pressed, the power
is turned off automatically 4 minutes later.
Programme
?
Power
9 programs
are available
according to
laundry
the
type.
1. Power
(Programme)
?
1. Program
?
?
When Start/Pause button is
Coloureds program is
-
pressed,
automatically selected.
By turning the Program dial, the program is
selected in orders of "Coloureds U
Synthetic U
Delicate
Hand WashU
PumpU
U
Wool
Rinse+Spin
U
?
?
Whites
-
-
-
Synthetic
-
Delicate
Wool
Hand Wash
-
-
-
Rinse+Spin
Spin
Pump
it
When the Power button is
pressed,
washer is
ready
the
So, if you
want to advance into the
washing cycle without selecting the
program, just press the Start/Pause
button and then the washer will proceed.
2. Course
Coloureds
Delay function,
also be used.
for Coloureds program.
And the other initial conditions as follows.
U
Regarding to the laundry type for each program
Please refer to the page13.
-
on
2. Initial Program
U
Spin
To cancel the Time
can
Whites".
-
Press the Power button to turn power
and off
Initial program
-
Coloureds
Program / Main
wash /
Normal Rinse/800 rpm / 40˚C
19
ow
H
to
washer
use
3. Completion of
Display
?
When
washing cycle is completed,
is displayed on the "Multi
display".
"
"
1. Special function
?
When child lock is selected, the
is displayed.
"
"
?
display
delay is selected, it shows
remaining times to finish the selected
4. Time left
?
When time
the
During washing cycle, the remaining
washing time is displayed.
Recommended program
?
-
-
diagnose display
-
?
If the washer has
a
trouble, the trouble
-
type is displayed.
"
"
Sensing
:
Problem of
:
Door is not closed
:
Over load in moter.
:
Over load in moter.
:
Water inlet trouble
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
If this
to the
-
:
water pressure error
overfilling
-
-
-
?
trouble
Drainage
:
Imbalance trouble
:
Water temperature trouble
error letters are displayed, please refer
troubleshooting page24 and follow the
guide.
-
water
:
Whites
:
Coloureds
around 2 hours and 38 minutes
:
around 1 hour and 55 minutes
around 1 hour and 28 minutes
Synthetic
:
Delicate
:
around 58 minutes
Wool
:
around 58 minutes
Hand Wash : around 57 minutes
Rinse+
Spin
:
Pump
Spin
:
around 19 minutes
around 11 minutes
:
around 1 minute
The
washing time may vary by the
laundry, water pressure,
water temperature and other washing
amount of
conditions.
?
If the imbalance is detected
suds
or
if the
removing program works, the
wash time shall be
(Max. increasing
20
by
manufacturer.
program.
2. Self
washing
longer.
45minutes.)
time is
M
aintenance
Before
cleaning
the washer interior,
unplug the electrical power
cord to avoid electrical
shock to avoid electrical shock hazards.
?
The water inlet filter
"
-"
-
message will blink
error
detergent
on
the control
panel
when water does not enter the
drawer.
If your water is very hard
or
contains traces of lime
deposit,
the water inlet filter may
become
It
clogged.
is therefore a good
idea to clean it from time to time.
2. Unscrew the
1. Turn off the
water
water inlet
tap.
hose.
3. Clean the
filter
4.
using
Tighten
up
the inlet
a
hard bristle
hose.
brush.
?
The drain pump filter
The drain filter collects threads and small
Check
!
regularly
CAUTION
that the filter is clean to
First drain it
using
1.
Open the lower cover
cap( )byusing
2.
in the
smooth
laundry.
running of your
machine.
the drain hose and then open the pump filter to
whatever may have
Be careful when
objects left
ensure
stopped
draining
it up.
if the water is hot.
Unplug the drain plug ( ),
allowing the water to flow out.
3. Take out any
At
foreign material
( ). After
cleaning, turn the pump filter ( )
from the pump filter
coin. Turn the drain
this time
plug( )topullout
water
the hose.
water does not flow any more, turn
plug (
the pump filter
close the lower
use a
flowing
remove
vessel to
on
prevent
to the floor. If the
( )
open to the left.
clockwise and insert the drain
)to
the
original place.
cover
cap.
100
3
1
3
2
2
21
aintenance
M
?
Dispenser drawer
After
?
?
?
a
while
detergents
and fabric softeners leave
deposit
a
If necessary it can be removed
downward and by pulling it out.
from the machine
To facilitate
cleaning,
completely
jet
of
a
It should be cleaned from time to time with
running
in the drawer.
water.
by pressing
the upper part of the fabric softener compartment
the catch
can
be removed.
max
max
?
The drawer
Detergent
can
be cleaned
?
occasionally
with
The
washing
?
?
recess
which should
old toothbrush.
replace
the drawer and
run a
drum
If you live in a hard water area, limescale
seen and it is not easily removed.
Over time the build up of scale
have to be replaced.
?
an
Once you have finished cleaning,
rinse cycle without laundry.
?
?
recess
also accumulate inside the
continuously
clogs appliances,
builds up in
and if it is not
metal articles
washing drum is made of Stainless steel, specks
(paper clips, safety pins) which have been left in
The
drum should be cleaned from time to time.
Although
the
washing
If you
use
descaling agents, dyes
or
bleaches, make
sure
they
places where
kept
it cannot be
in check these will
of rust
can
be caused
Remove the
Never
22
use
spots with
steel wool.
a
stainless steel
can
are
attack part of your
cleaning agent.
by
small
the drum.
suitable for
washing
use.
Descaler could contain components that
eventually
washing
machine.
machine
aintenance
M
?
Cleaning
your washer
1. Exterior
of your washer
can
extend its life.
The outside of the machine
can
be cleaned with
Proper
care
household
water and
a
neutral
non
abrasive
detergent.
Immediately wipe
Try
warm
off any
not to hit surface with
IMPORTANT: Do not
spills. Wipe
with
damp
cloth.
sharp objects.
use
methylated spirit,
diluents
or
similar
products.
2. Interior
Dry around the washer door opening, flexible gasket
always be clean to ensure a water tight seal.
Run washer
through a complete cycle using
Repeat process if necessary.
NOTE
?
Remove hard water
Winterizing
winterizing
1. Turn off water
3.
an area
where
freezing
instructions to prevent
areas
should
labeled
as
washer safe.
can occur or
damage
moved in
freezing temperatures,
to the washer:
supply tap.
electrical cord into
Plug
These
hot water.
deposits using only cleaners
2. Disconnect hoses from water
4. Add
glass.
instructions
If the washer is stored in
follow these
and door
1gallon(3.8L)
a
supply
and drain water from hoses.
properly grounded
nontoxic recreational
electrical outlet.
vehicle(RV) antifreeze
to
empty wash drum. Close
door.
5. Set
spin cycle
and let washer
spin
Not all of the RV antifreeze will be
6.
Unplug
electrical power cord,
7. Remove
Replace
dispenser
remove
through
a
expelled.
drum
interior, and close door.
drawer. Drain any water in
compartments and dry compartments.
drawer.
8. Store washer in
9. To
dry
for 1minute to drain out all water.
an
uprignt position.
antifreeze from washer after storage,
complete cycle using detergent.
run
empty washer
Do not add wash load.
23
T roubleshooting guide
This
washing machine is equipped with automatic safety functions which detect and diagnose faults at an
early stage and react appropriately
When the machine does not function properly or does not function at all, check the following points before
you call the Service Department.
Possible Cause
Symptom
Rattling and
clanking noise
?
Solution
Foreign objects such as coins
safety pins maybe in drum or
or
Stop
washer and check drum
and drain filter.
If noise continues after washer
pump.
is
restarted, call your authorized
service.
Thumping
sound
?
Heavy wash loads
thumping sound.
a
may produce
This is usually
normal.
Vibrating
noise
?
?
redistribute wash load.
If not removed
Have all the transit bolts and
packing
been removed?
Are all the feet
the
If sound continues, washer is
probably out of balance. Stop and
resting firmly
during
installation. See Installation for
on
removing
transit bolts.
Wash load
ground?
in drum.
unevenly distributed
Stop washer and
rearrange wash load.
Water leaks.
?
Fill hoses
at
?
tap
or
or
drain hose is loose
Check and
tighten
hose connections.
washer.
House drain
pipes
are
clogged.
Unclog
drain
pipe.
Contact
plumber
if necessary.
Too much
Oversudsing
detergent?
can cause
Water does not enter
washer
or
?
supply
is not
adequate
in
or
unsuitable
The formation of foam
water leaks.
Check another tap in the house.
area.
it enters
slowly
Water
detergent
is not
?
Water
?
Water inlet hose
?
The filter of the inlet hose
supply tap
completely open.
are
Fully
kinked.
open tap.
Straighten
hose.
Check the filter of the inlet hose.
clogged.
Water in the washer
does not drain
drains
24
slowly.
?
Drain hose is kinked
?
The drain filter is
or
clogged.
Clean and
straighten
or
clogged.
Clean the drain filter.
the drain hose.
T roubleshooting guide
Possible Cause
Symptom
Washer does not start
?
Electrical power cord may not
plugged in or connection
be
Solution
Make
plug fits tightly
sure
in wall
outlet.
may be loose.
?
House fuse
breaker
blown, circuit
tripped,or
a
power
outage has occurred.
Reset circuit breaker
Do not increase fuse
If
problem
is
a
replace
capacity.
or
fuse.
circuit overload, have
it corrected
?
Water
supply tap
is not turned
by a qualified electrician.
on water supply tap.
Turn
on.
Washer won't
spin
Check that the door is
shut.
firmly
Close the door and press the
Start/Pause button. After pressing
the Start/Pause button, it may take
a few moments before the clothes
washer
begins to spin. The door
spin can be
must lock before
achieved.
Door does not open
Once started, the door can not be
for safety reasons.
opened
Wait
one or
two minutes before
opening the door to give the electric
locking mechanism time to release.
Wash
cycle
delayed
time
The
washing time may vary by the
laundry, water
amount of
pressure, water temperature and
other using conditions.
If the imbalance is detected
suds
or
if the
program works, the
wash time shall be increased.
removing
25
T roubleshooting guide
Possible Cause
Symptom
?
Water
?
Water
?
?
Solution
supply is not adequate in area
supply taps are not completely
open.
Water inlet hose
are
Fully open tap.
Straighten
kinked.
The filter of the inlet hose
Check another tap in the house.
clogged.
hose.
Check the filter of the inlet hose.
?
Drain hose is kinked
Clean and
?
The drain filter is
Clean the drain filter.
?
Load is too small.
Add 1
?
Load is out of balance.
balance the load.
?
The
Rearrange
spinning
appliance
or clogged.
clogged.
has
an
imbalance
detection and correction system. If
individual heavy articles are
or
straighten the
drain hose.
2 similar items to
help
load to allow proper
bath mat, both robe,
system may stop spinning or
loaded(as like)
etc. this
interrupt the spin cycle
altogether, if the imbalance is too
great even after several spin starts.
If the laundry is still too wet at the end
of the cycle, add smaller articles of
laundry to balance the load and
repeat the spin cycle.
even
?
?
Is the door
Close the door.
opened?
If"
"is not released, call for service.
Unplug the
power
plug
service.
?
If the water overfills due to the
water
"
?"
"
display.
"is
sensor
26
faulty
valve, you will get
displayed
if the water level
malfunction.
?
Over load in motor.
?
Over load in motor.
Close the water tap.
Unplug the power
Call for service.
plug.
and call for
Serial Number
How to read Serial Number.
:There is attached
Example)
a
Serial Number label
on
back side of this
product.
805KW00001
Serial No.
PRODUCT CODE.
MANUFACTURED MONTH.
MANUFACTURED YEAR(LAST DIGITAL).
Critical Parts List.
:
*
When you need to change frequency of
You must change following parts list.
washing
machine
(
60HzE
50Hz),
DRAIN PUMP ASSY.
27