LG V-5143T Owner's manual

Solvent
Red mark
Yellow mark
Dust Indicator
Floor
1
2
--2--
CAUTION
Take
when setting the
dust bag.
care
Flexible Hose
Control Cover
Button Switch
V-5166CT
V-5166CT
V-5143T
V-5153TV
V-5144HT
V-5155HTV
Slide Switch
V-5144HT
V-5155HTV
Air
Adjustment
V-5143T
V-5153TV
Cord rewind button
Control Cover
Plug
Telescopic pipe
Body
Switch
button
Dust indicator
(ON/OFF)
Suction inlet
Castor
Latch
Nozzle
OPTION
Accessory
holde
Upholstery
--3--
nozzle
Crevice tool
Dusting
brush
14
IMPORTANT SAFEGUARDS
turn off all controls before
Always
15 Do not
When
using an electrical appliance, basic safety
precautions should always be followed, to reduce
the risk of fire, electric shock and injury to persons,
including the following:
etc. Extra
unplugging.
chairs, tables,
must be taken when
care
16 The cord
cleaning
rapidly when rewinding.
path and hold the plug when
rewinding onto cord reel. Do not allow the plug
to whip when rewinding.
Provide
USING THIS APPLIANCE
or
the
on
stairs.
READ ALL INSTRUCTIONS BEFORE
ASSEMBLING
v/cleaner
keep
moves
clear
a
17 Take electrical
inspection when
peeled off.
hose is
cracked and its coat is
WARNING
18 Use this v/cleaner
for
Disconnect power supply before servicing and/or
cleaning the unit. If not, electric shock could occur
and/or cleaner could
1 Do not leave
appliance plugged
from the outlet when not in
servicing
2 Do not
not
in.
Unplug
jobs expected
it
20 Do not
before
solvent in toxic
dry cleaning
use
or
flammable.
outdoors
up the water
3 Do not handle
or on
or
plug
damage.
wet surfaces. Do
or
appliance
21 Do not allow
with wet
4Donotallowittobeusedasatoy.Close
attention is necessary when used by children
sharp
heavy objects
or
to rest
on
the power cord. If the power cord is damaged
or frayed, it may cause a fire or electric shock.
22 The
use of radio transmitting devices close to
appliance may interfere the function of the
appliance, input power may vary.
the
manufacturer's recommended
only
It may result in the surface
Wipe off the dirty place with a clean
cloth.
wet material.
hands.
5 Use
for those
cleaner.
pull out the cord beyond the red mark.
Pulling the cord out past the red mark may
cause problems with the cord reel.
.
use
pick
use or
only
vacuum
19 Do not
start.
suddenly
home
a
attachments.
6 If the
supply cord is damaged, it must be
replaced by the manufacturer or its service
agent or a similarly qualified person in order to
avoid
a
7 Do not
USING THE VACUUM CLEANER
1
hazard.
pull
by
or
carry
close a door
handle,
on
the power cord as a
cord, or pull the cord
around
sharp edges or corners. Do not run
appliance over the cord. Keep the cord away
unplug by pulling the
plug, not the cord.
cord. To
unplug,
To
11 Do not
pick up anything that is burning
smoking, such as cigarettes, matches,
fireplace ashes.
use
combustible
or use
13 Do not
in
to
up
vapors such as
where they may exist.
liquid
areas
pick
or
use vacuum
and/or filters in
flammable
the HOSE.
button and
pull
the hose
depress
out.
Adjustment.
(fig. 3)
Push the slider control downwards to extend or/
retract extension
pipes
Insert the STEEL PIPES
4 Pull the main
or
Do not
pull
bag
--4--
out of the
the cord
each other.
vacuum
Pulling
the cord out
problems
(fig.1)
cleaner and
(fig.4)
beyond
cause
or
place.
plug
firmly
insert into the socket outlet.
or
gasoline
cleaner without dust
of the v/cleaner
TELESCOPIC EXTENSION PIPES
air flow.
not
remove
body
sound is heard.
3 EXTENSION PIPES
use
Keep hair, loose clothing, fingers, and all parts
of body away from the openings. Do not use
vacuum cleaner(v/cleaner) to pick up sharp
hard objects, small toys, pins, etc.
section into the
narrow
(fig.1)
clicking
a
clamp
put any object into openings. Do not
with any openings blocked; keep free of
dust. lint, hair, and anything that may reduce
nozzle, the extension pipes and
insert the
Insert the HOSE into
until
9 Do not
12 Do
:
2 HOSE Connection.
grasp the
10
the
wide section.
from heated surfaces.
8 Do not
Connecting
the handle
the red mark.
past the red mark may
with the cord
rewinding
system.
When
cleaning
is
completed, unplug
cord from
socket outlet and press the cord reel button.
The cord will be automatically rewound.
9 DUST INDICATOR
5 Press the ON/OFF switch
Power indicator will
switch button in off
6
1)
). (fig.5)
extinguish slowly
GREEN
when press
RED
position.
the power
Adjusting
(
The normal
cleaning mode, this
when optimal cleaning is
appliance sensing the floor
mode is used
the
required by
condition and amount of dust
BOOSTER
removing
present.
This mode is suitable for
:
dirt which is
deep-embedded
in
a
floor, and also
recommended when the hose, the pipes, of
carpet
the
or
the
on
nozzle
is
Empty
nozzle
Adjust power with the power control switch in
the handle.
:
the filter
use.
bag.
Filter
Watch the dust indicator after
(fig.6)
V-5166CT
Automatic
:
(fig. 11)
Continue to
:
with any
clogged
bulky
10
the dust filter
Switch the
is full
the
detaching
than 10cm from the floor.
more
Replacing
bag
bag
cleaner off
(fig. 5), remove
by pressing the knob and open the
cover by pressing the latch. (fig. 12)
1) Paper filter bag
Dispose of the bag and set the new one.
2) Cloth filter bag
Empty the bag then reuse. (fig. 15)
CAUTION: Always use genuine LG dust bag. If you
can't get it, use only 'HR6938-OSH' of paper
bag made by PHILIPS.
vacuum
the hose
obstacles, Power in this mode is much higher
11 THE MOTOR SAFETY FILTER CLEANING
than MAX mode power.
BOOSTER operates for 10seconds and is
2. Shake the dust off and wash filter in
1. Pull out the MOTOR SAFETY FILTER
restored to the last mode
automatically.
MAX : This mode is used for cleaning carpets
or similar items which require strong suction
soapy water. Do not clean in
or
in a washing machine.
3. Remove
force.
OFF
the
Used to
:
stop appliance operation.
power with the
1.
sliding
switch in the
2.
handle.
Pass the nozzle
lightly
mark
(fig
on
18-
:
High Efficiency pleated
fig
:Micro
18-
over
Store
the floor. Do not exert
vacuum
the holder slot
the suction power
(fig.19)
weakened,
pressure. If
raise the front end
Holder
can
be attached
Accessories
cool, clean, and
:
Push the nozzle holder into
on
the bottom of the v/cleaner.
be stored in the holder with
The crevice tool
can
be stored at the tool box in
the
rear
of the
BEFORE REQUESTING SERVICE
Proper assembly and safe use of your vacuum
are your personal responsibilities. Read this
"Owner's Manual" carefully for important use and
safety
cleaner
appliance
CREVICE TOOL
:
For the dust between the ribs of
radiator, between the shelves,
or
in the
narrow
gap.
DUSTING BRUSH: For
delicate fabrics
on
(fig. 21)
types, like (fig. 22)
on
the
gentle vacuuming
furniture,
UPHOLSTERY NOZZLE: For
the
a
v/cleaner.(fig.20)
the
using claming
can
hook
on
Extention wands
on
cleaner in
into the holder slot
8 HOW TO USE THE ATTACHMENTS
dust
Micro Filter
Horizontal Position: Push the nozzle holder
slightly. (fig.10)
the
arrow
Filter.V-5143T, V-5153TV)
dry place.
Upright Position
as
flooring, particularly
by applying only light
the
keeping
it.
13 HOW TO STORE THE VACUUM CLEANER
will be obtained
two
with the
V-5166CT, V-5144HT, V-5155HTV,
then suction
this may damage the
parquet floors. Best results
Accessory
filter
day.
clean EXHAUST FILTER.
3. Insert the EXHAUST FILTER
switch in the
7 HOW TO USE NOZZLE
excessive pressure,
the
a
Open the exhaust cover. (fig 17)
Replace the old EXHAUST FILTER
new one or
3) V-5143T, V-5153TV (fig.8,9)
Adjust power with the sliding
body. (fig.9)
Open the hole in the handle,
power will be reduced.(fig 8)
Dry
12 THE EXHAUST FILTER REPLACEMENT
2) V-5144HT, V-5155HTV (fig.7)
Adjust
moisture.
a warm
dish-washer
a
in shade for about
sufficiently
(fig. 16)
upholstery.
of
Repairs, when necessary, must be performed at an
authorized service facilities. This appliance is
a
curtain etc.
vacuuming
information.
of the
intended for HOUSEHOLD USE ONLY and not for
commercial
--5--
or
industrial
use.
SAVE THESE INSTRUCTIONS
The serial number is found
number is
unique
You should record
guide
as a
Date of
Dealer
requested
permanent
purchase
purchased
on
the bottom of this unit. This
to this unit and not available to others.
information here and retain this
record of your
purchase.
from
Dealer address
Dealer
phone
No.
Model No.
Serial No.
TROUBLE SHOOTING CHART
Review this chart to find
WARNING
shock could
do-it-yourself
: Disconnect power
occur
supply
and/or the cleaner could
run
Poor suction
1.
movable
suddenly
Unplugged
and/or
cleaning
the unit
as
electrical
start.
at wall outlet.
Possible solution
1.
Plug
in
firmly
2. Push switch button.
"OFF"
3.
Regulate
1. Full
1.
2.
2.
Change the filter bag.
Change the clean filter.
Change brush.
Replace hose.
position.
or clogged filter bag.
Clogged clean filter.
3. Worn universal nozzle brush.
3.
4. Hole in hose.
4.
Clogged
6. Filter
picks
servicing
2. Power control S/W is in
5.
Cleaner
before
performance problems.
Possible Cause
Problem
Cleaner won't
solutions for minor
universal nozzle.
cover
1. Suction too
power control switch.
open.
5. Clean the air passage of nozzle.
6. Close filter cover.
strong.
1.
rugsor universal nozzle
pushes too hard
--6--
Regulate
power control lever.