LG V-5166CT Owner’s Manual

Vacuum Cleaner
OWNER'S MANUAL
MODEL
:
V-5060CT, V-5000CT
V-5000HT/HD, V-5000T/D
V-5166CT, V-5166CTV
Before installing and operating your vacuum cleaner,
please read this owner's manual carefully and thoroughly,
especially operation instructions and safety precautions.
Solvent
Red mark
Yellow mark
Dust Indicator
Floor
1
2
2
CAUTION
Take
when setting the
dust bag.
care
Flexible Hose
Button Switch
V-5060CT
V-5000CT
V-5166CTV
V-5166CT
V-5060CT
V-5000CT
V-5166CTV
V-5166CT
V-5000T
V-5000D
V-5000HT
V-5000HD
Slide Switch
Air
Control Cover
V-5000HT
V-5000HD
Adjustment
V-5000T
V-5000D
Extension
Cord rewind button
Control Cover
pipes
Plug
Telescopic Pipe
(V-5060CT)
(V-5000CT)
(V-5000HT)
(V-5000T)
(V-5166CT)
(V-5166CTV)
Steel
Body
Switch
button
Dust indicator
(ON/OFF)
Suction inlet
Castor
Pipe
(V-5000CD)
(V-5000HD)
(V-5000D)
Latch
ACCESSORIES
Nozzle
Accessory
holder
Upholstery
3
nozzle
Crevice tool
Dusting
brush
English
?
?
When
using an electric appliance, you should always follow
instructions to prevent fire risk, electric shock and injury to persons.
Read all instructions before using this appliance.
safety
SAFETY INSTRUCTIONS
1.
Always keep the plug out of wall socket, when the appliance is not
unplug the appliance by pulling the cord. To unplug, grasp
2. Do not
in
use.
the
plug,
not the cord.
3. Do not
use vacuum
cleaner without dust
bag
and filters in the
right place.
4. If the power cord of this appliance is damaged, it must be replaced by LG
or their authorized service representative, as special tools and parts are
required.
pull the power cord in order to move the appliance.
the
cord away from sharp edges, corners or heated surfaces.
Keep
Do not drive the appliance over the power cord.
The cord moves rapidly while rewound. Provide the appliance with a clear
path and hold the plug when the cord is rewound onto the cord reel.
Do not allow the cord to whip persons while rewound.
Do not allow sharp or heavy objects to stay on the power cord. If the power
cord is damaged or frayed, it may cause a fire or electric shock.
Do not pull out the cord beyond the red mark. Pulling the cord out past the
red mark may cause problems with the cord reel.
Do not use your vacuum cleaner to suck up sharp and hard objects such
as pins, stones, small toys, etc.
5. Do not
6.
7.
8.
9.
10.
11.
12. Do not suck up water
or
wet materials.
13. Never suck up ashes until
they
14. Never suck up flammable
are
or
cold.
combustible
liquid
or
vapors such
as
gasoline.
15. Do not allow children to
18.
19.
with the
appliance. Pay
attention when the
by children.
appliance for outdoor cleaning or wet surface cleaning.
Only use the appliance with recommended accessories by manufacturer.
Take electrical inspection when hose is cracked or the coat of power cord
peeled off.
Do not grasp the plug or appliance with wet hands.
appliance
16. Do not
17.
play
is used
use
the
4
is
20. Do not
of the
a
use
toxic
appliance.
or
flammable
It may
dry cleaning solvent to clean up the surface
damage the surface. Just wipe off the surface with
clean towel.
21. The
transmitting devices close to the appliance may interfere
appliance, input power may be vary.
Do not put any object into openings; keep it free of anything that may
prevent air flow, for example dust, lint, hair, and so on.
Keep all part of your body, for example hair, loose clothing, fingers, etc.,
away from the openings.
Always turn off all switches before unplugging.
use
of radio
the function of the
22.
23.
24.
25. Do not put your vacuum cleaner
taken when cleaning stairs.
26. Use this
appliance only
on
for those
cleaner.
5
chairs, tables, etc. Extra
jobs expected
for
a
care
must be
home
vacuum
English
OPERATING INSTRUCTIONS
Getting
?
the
Connecting nozzle,
Insert the
*
narrow
If you have
extend
or
ready
extension
for
use
pipes and
(Fig. 1)
Connecting
telescopic extension pipe, you
Push the slide button downward
body:
clicking
sound is
Pull the main
plug
can
or
adjust
length of the
locking knob to
body
of the
vacuum
heard.(Fig. 2)
out of the vacuum cleaner and connect it to the
Press the ON/OFF switch.
on
the power cord, you must
(Fig. 5)
Power indicator will
extinguish slowly when press
position.(V-5060CT, V-5166CT/CTV, V-5000CT)
Adjusting
other:
the
turn the
Insert the hose into the
socket outlet: When you can see a red mark
stop pulling out the cord immediately. (Fig. 4)
?
one
pipe.(Fig.3)
hose to
a
hose handle
part into the wide part.
retract extension
cleaner until
?
cleaner
a
pipe easily:
?
vacuum
switch button in off
the suction power
1) For model V-5060CT, V-5166CT/CTV, V-5000CT (Fig. 6)
Adjust
?
the suction power with the power control switch
Automatic
:
operate the
on
the handle
This mode is recommendable for normal situation. When you
appliance in this mode, the dust sensor in the appliance
controls the suction power. If you put the nozzle
area, the power will go up: vice versa.
automatically
?
Booster
:
This mode is suitable for
embedded in
grip.
a
hose, the pipes
carpet
or on
removing
on
dirt which is
dusty
deeply
the floor, and also recommendable when the
with any bulky obstacles. The
MAX
than
mode power.
higher
Booster operates for 10 seconds and the mode returns to the previous
or
the nozzle is
clogged
Power in this mode is much
one
automatically. (V-5060CT, V-5166CT/CTV)
6
?
MIN
:
This mode is used for
cleaning
at
night,
or
when silence is
required.
(V-5000CT)
?
MAX:This mode is used for
cleaning carpets
or
similar items which
require
strong inhaling force.
?
OFF: Push this button when you want to stop
operation.
2) For model V-5000HT, V-5000HD(Fig. 7)
?
Adjust
the power with the
sliding
volume switch
on
the
grip
handle.
3) For model V-5000T, V-5000D
?
?
Adjust power with the slide switch on the body. (Fig. 9)
Open the air damper hole on the grip handle. to reduce
power. (Fig. 8)
suction
Cleaning effectively
Try
not to
put much pressure
the nozzle while
on
cleaning.
Excessive
the nozzle may cause damage your floor, particularly
Best
results will be obtained by applying only light pressure. If
parquetry.
the suction power is getting weak, raise the front part slightly.(Fig. 10)
pressure
on
Tips
Dust indicator
(Fig. 11)
?
Green
?
Red: Filter
?
Dust indicator works
turn on
:
No
problem.
bag
You
can
continue to
use
is filled with dust. You should
the
appliance.
exchange your
filter
bag.
properly only when power is on. To check dust bag,
the appliance and keep the nozzle more than 10cm away from
the floor for
a
moment.
7
Accessories
?
Accessory holder
hook.(Fig. 21)
be attached to the extension wand
can
?
Accessories
can
be stored in the holder
?
Crevice tool
can
be stored at the tool box in the
There
?
are
two
ways.(Fig. 22)
appliance.
3 types of accessories which have different purposes.
Crevice tool is
designed
for
cleaning
between the ribs of the radiator
?
by
by clamping
brush is
Dusting
designed
or
dust in the
narrow
gap, for
example,
between the shelves.
for delicate
vacuuming
of fabrics
on
the furniture,
curtain, etc.
?
Upholstery
nozzle is
Management
Replacing
?
?
?
If you
use a
paper filter
If you
use a
cloth filter
Open
bag.
cover
and
the hose.
remove
bag, dispose
bag, empty
of the
a
the dust
on
the
upholstery.
safety
pull
dish-washer
or
in
Remove the moisture.
a
bag
the
cover
and install
with
new
pressing
the
one.(Fig. 14)
bag after sliding
original place.(Fig. 15)
the
clip
off
filter
out the motor
washing
Dry
Open
the cloth filter
Then put it in the
safety filter.(Fig. 16)
Shake the dust off and wash filter in
in
?
the
the motor
the
vacuuming
bag
and
appliance
latch.(Fig. 12)
Cleaning
?
the dust filter
unzipping
for
of filter
Turn off the
or
?
designed
a warm
soapy water. Do not clean it
machine.
the filter
sufficently
8
in shade for about
a
day.
The exhaust filter
the exhaust
replacement.
?
Open
?
Replace
?
Insert the exhaust filter
(Fig.
Fig.
cover on
the back side of the
the old exhaust filter with the
18-
:
18-
:
keeping
appliance. (Fig. 17)
clean exhaust filter.
new one or
arrow
mark
on
it.
High efficiency pleated micro filter,
Multilayer micro and carbon filter option)
-
Storage
?
Store your
?
Upright position :
v/cleaner.(Fig. 19)
?
Horizontal
?
a
cool, clean, and dry place.
Insert the nozzle
position:
v/cleaner.(Fig. 20)
Before
?
cleaner in
vacuum
hanger
Insert the nozzle
requesting
into the slot
hanger
on
into the slot
on
the base of the
the
rear
of the
service
Proper assembly and safe use of your vacuum cleaner are your personal
responsibilities. Read this "Owner's manual" carefully for important use and
safety information.
Repairs,
when necessary, must be performed at an authorized service
appliance is intended for HOUSEHOLD USE ONLY and not for
facilities. This
commercial
or
industrial
use.
Tips
?
When you finish your cleaning, unplug cord from power source and
press the cord reel button. The cord will be automatically rewound.
?
Always
use
of paper
LG dust
bag
made
bag. If you can
by PHILIPS.
9
not
get it,
use
only 'HR6938-OSH'
English
Save this instructions
The serial number is found
on
the bottom of this unit. This number is
unique
to this unit and not available to others.
You should record
requested information
purchase.
here and retain this
guide
as a
permanent record of your
Date of
purchase
Dealer
purchased
from
Dealer address
Dealer
phone
No.
Model No.
Serial No.
TROUBLE SHOOTING CHART
Review this chart to find
do-it-yourself
solutions for minor
performance
problems.
WARNING
unit
: Disconnect power supply before servicing and/or cleaning the
electrical shock could occur and/or the cleaner could suddenly start.
as
Possible Cause
Problem
Cleaner won't
run.
1.
Unplugged
at wall outlet.
2. Power control S/W is in
'OFF'
1. Full
Poor suction.
2.
position.
clogged filter bag.
Clogged clean filter.
or
Possible solution
1.
Plug
in
firmly.
2. Push switch button.
3.
Regulate
1.
Change the filter bag.
Change the clean filter.
Replace the hose.
2.
the control s/w.
3. Hole in hose.
3.
4.
4. Clean the air passage
of the nozzle.
Clogged
5. Filter
nozzle.
cover
open.
5. Close the filter
Cleaner
rug
or
picks
nozzle
movable
1. Suction too
strong.
1.
Regulate power
lever.
pushs
too hard.
10
cover.
control
11
P/No.: 3828Fi3698D
Made in KOREA