LG LH-T6345D Owner's manual

LH-T6345D JA6GLLS_ENG
DVD/CD RECEIVER
OWNER'S MANUAL
MODEL: LH-T6345
(Main Unit: LH-T6345D,
Speakers: LHS-T6345T, LHS-T6345W)
Before
connecting up, operating
please read
completely.
this instruction
repairing
booklet carefully
or
this
and
product,
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation mark within
triangle
an
is intended to alert the
equilateral
user
to the
presence of important operating and maintenance
(servicing) instructions in the instructions
accompanying
the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this
such
as a
book
case or
equipment
in
a
confined space
similar unit.
ON COPYRIGHTS:
CAUTION:
This DVD/CD receiver
To
employs
a
Laser
It is forbidden
System.
via cable,
proper use of this product, please read this
owner's manual carefully and retain it for future reference.
ensure
Should the unit
service
require maintenance, contact
location (see service procedure).
an
authorized
Performing controls, adjustments, or carrying out procedures
other than those specified herein may result in hazardous
radiation exposure.
To
prevent direct exposure
to laser
beam, do
not
try
to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
placed
the
on
apparatus.
law to copy, broadcast, show, broadcast
in public, or rent copyrighted material without
by
play
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on
some discs. When recording and playing the pictures of
these discs on a VCR, picture noise will appear.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents
and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
SERIAL NUMBER: The serial number is located
of this unit. This number is
unique
This
product
is manufactured to
radio interference
DIRECTIVE
73/23/EEC.
2
requirements
89/336/EEC,
comply
with the
of EEC
93/68/EEC and
guide
as a
the back
to this unit and not
available to others. You should record
here and retain this
on
requested
information
permanent record of your
purchase.
Model No.
Serial No.
___________________________________
___________________________________
Contents
Introduction.....................4-9
SymbolusedinthisManual...............4
AbouttheSymbolDisplay.............4
CHANGINGTHEAUDIOCHANNEL
.
.
.
.
.
.
.
.20
STILL PICTURE AND FRAME-BY-FRAME
PLAYBACK.............................21
NotesonDiscs.........................4
SLOWSCAN...........................21
HANDLINGDISCS.......................4
REPEATA-B...........................21
STORINGDISCS.........................4
REPEAT...............................21
CLEANINGDISCS........................4
TIMESEARCH..........................21
TypesofPlayableDiscs..................5
ZOOM..............................22
REGIONALCODE........................5
MARKERSEARCH....................22
Disc-relatedterms......................6
PAUSE................................22
FrontPanel............................7
SpecialDVDFeatures..................22
DisplayWindow.........................7
CHECKING THE CONTENTS OF DVD
RemoteControl.........................8
DISCS:MENUS.........................22
.8
TITLEMENU..........................22
.8
DISCMENU...........................22
RearPanel............................9
CAMERAANGLE......................22
REMOTE CONTROL OPERATION RANGE
.
.
.
REMOTE CONTROL BATTERY INSTALLATION
.
.
CHANGINGTHEAUDIOLANGUAGE.
InstallationandSetup.
.
.
.
.
.
.
.
.
.10-19
.
TVConnections.......................10
.11
ExternalEquipmentConnection
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.22
SUBTITLES...........................22
Audio CD or MP3/WMA Disc
Audio CD and MP3 / WMA Disc Features
Playing
an
.
.
.
.
.
.
.
.23
.24
AerialConnections.....................11
PAUSE................................24
SpeakerSystemConnection..............12
SpeakerPositioning....................13
Mini Glossary for Audio Stream &
MOVINGTOANOTHERTRACK.............24
SurroundMode........................14
SoundMode..........................14
On-ScreenDisplay.....................15
PLAYBACK STATUS/RESTRICTIONS
.
.
.
.
.
.
.
.15
REPEATTRACK/ALL/OFF.................24
SEARCH.............................24
ProgrammedPlayback..................25
REPEATPROGRAMMEDTRACKS
.
.
.
.
.
.
ERASING A TRACK FROM PROGRAM LIST
.
.
.
.
ERASING THE COMPLETE PROGRAM LIST
.
.25
.25
.25
InitialSettings......................16-19
ViewingaJPEGDisc...................26
GENERALOPERATION...................16
SLIDESHOW..........................26
LANGUAGE............................16
STILLPICTURE.........................26
?OSD...............................16
MOVINGTOANOTHERFILE...............26
?DiscAudio/Subtitle/Menu.............16
TOROTATEPICTURE....................26
DISPLAY...............................16
MaintenanceandService................27
HANDLINGTHEUNIT....................27
?TVAspect..........................16
?DisplayMode........................16
PlayingaDivXMovieDisc...............28
AUDIO................................17
AdditionalFeatures.....................29
?5.1SpeakerSetup.....................17
.17
?DynamicRangeControl(DRC)
LASTSCENEMEMORY...................29
SYSTEMSELECT.......................29
?Vocal...............................17
SLEEPTIMERSETTING..................29
LOCK(ParentalControl)..................17
?Rating.............................17
?Password(SecurityCode)...............18
?CountryCode........................18
DIMMER...............................29
.
.
.
.
.
.
.
.
.
OTHERS..............................18
MUTE.................................29
.30
PresettingtheRadioStations
ListeningtotheRadio...................30
RDSOperation........................31
.
.
.
.
.
.
.
.
.
.
.
.
?PBC...............................18
RDSTUNING...........................31
?DivX(R)Registration...................18
RDSDISPLAYOPTIONS..................31
5.1SpeakerSetup.....................19
ProgrammeSearch(PTY)................31
SPEAKERSETUP.......................19
?Speaker............................19
?Size................................19
?Volume.............................19
?Distance............................19
?Test................................19
Reference....................32-35
LanguageCodes.......................32
CountryCodes........................32
Troubleshooting.....................33-34
Specifications.........................35
Operation.....................20-31
PlayingaDVDorVideoCD
.
.
.
.
.
.
.
.
.
.
.20-22
PLAYBACKSETUP.....................20
GeneralFeatures......................20
MOVINGTOANOTHERTITLE..............20
MOVING TO ANOTHER CHAPTER/TRACK
.
.
.
.20
SEARCH...............................20
3
Introduction
To
proper use of this product, please read this
owner's manual carefully and retain for future
ensure
reference.
This manual
provides
information
on
the
About the
"
"
may appear on your TV
and indicates that the function
owner's manual is not
operation
and maintenance of your DVD/CD receiver. Should the
unit require service, contact an authorized service
location.
Used in this Manual
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
display during operation
explained in this
available on that specific DVD
video disc.
Notes
Symbol
Symbol Display
on
Discs
HANDLING DISCS
The
of
Do not touch the
disc. Hold the
disc
do not
by
the
playback side of the
edges so that fingerprints
the surface. Never stick paper
or
tape
on
get
on
the disc.
electric shock.
The exclamation
point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
or
likely
to
other material
cause
harm to the
damage.
STORING DISCS
After
Note:
Indicates
special
notes and
operating
features.
tips
and hints for
applicable only
symbol.
4
making
of the
following symbols
represented by the
one
to the disc
the task easier.
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
CD
Audio CDs
MP3
MP3 Discs
WMA
WMA Discs
JPEG
JPEG Discs
DivX
leave it in
a
Do not expose
of heat and never
case.
sunlight or sources
parked car exposed to direct sunlight.
CLEANING DISCS
A section whose title has
is
store the disc in its
the disc to direct
Tip:
Indicates
playing,
DivX Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Do not
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for older
vinyl
records.
Types
of
Playable
Discs
DVD
(8cm/12cmdisc)
Video CD
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
In
addition, this unit plays DivX file, DVD -R, DVD +R,
DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and
CD-R / CD-RW that contains audio titles, MP3, WMA,
and/or JPEG files.
REGIONAL CODE
This DVD/CD receiver is
designed and
manufactured for playback of region "2"
encoded DVD software. This unit can play
only DVD discs labeled "2" or "ALL".
2
Notes:
?
?
?
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not
shaped
use
or
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
Notes
on
Regional
Codes
?M ost DVD discs have
numbers in it
clearly
a
globe
visible
with
on
the
one or more
cover.
This
number must match your DVD/CD receiver's
regional code or the disc cannot play.
?
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears
on
the TV
screen.
malfunctions.
Notes
on
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according to disc content designed by the software
manufacturer, therefore some playback features may
not be available
or
other functions may be added.
Manufactured under license from
Dolby Laboratories.
double-D symbol are
Logic", and the
trademarks of Dolby Laboratories. Confidential
Unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
"Dolby",
"Pro
Manufactured under license from
Digital
Theater
Inc. US Pat. No's. 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 and other US and
Systems,
world-wide
"DTS
Digital
Digital
patents issued and pending. "DTS" and
Digital
Surround"
Theater
Theater
registered trademarks of
Systems, Inc. Copyright 1996, 2003
Systems, Inc. All rights reserved.
are
5
Disc-related terms
PBC:
DVD±R/DVD±RW
DVD -R and DVD +R
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
re-writable
4.38
two standards for
are
media, meaning the DVD
erased and re-recorded.
Gigabytes
much. There
only
content
Single-sided
discs
can
can
be
hold
and double-sided discs hold twice
are no
dual
layer single
as
sided recordable
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
CDs.
discs.
Title
VCD
(Video CD)
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along
with
quality
stereo sound.
MPEG
MPEG is
an
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
MP3 is
popular compression format used for digital
files that yields very high near-CD quality.
a
WMA
Windows media audio file. A
developed by
Microsoft
type of coding / decoding
Corp.
JPEG
Joint Pictures
Expert Group.
file format that allows you to
on the number of colors.
JPEG is
save
compressed
images with no limit
a
Chapter (DVD video discs only)
A chapter is a segment of a title such
film
or one
interview in
a
series. Each
as a scene
chapter
in
a
is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
DivX is the
name
which is based
on
of
a
the
revolutionary
new
MPEG-4
standard for video.You will be able
movies
using
Scene
On
(VCD)
video CD with PBC
(playback control) functions,
moving pictures and still pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
Track
A distinct element of audiovisual
information, such
as
the
DivX
6
be title 2, and cast interviews could be title 3. Each
title is assigned a reference number enabling you to
locate it easily.
may not be recorded.
MP3
audio
(DVD video discs only)
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a
documentary describing how the film was made could
new
video codec
compression
to play DivX
this DVD/CD receiver.
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow
track of video
of audio.
(with multiple angles)
one
and several tracks
Front Panel
VOLUME Control
Press "v" to increase volume
or
press
"V" to decrease the volume.
TUNING
(-/+)/SKIP/SCAN
MEMORY/STOP
MONO/STEREO/PAUSE/STEP
FUNCTION/PLAY
Press and hold down this button about 3
then press
DISC
repeatedly
Tray
seconds,
to select other function.
OPEN/CLOSE
STANDBY indicator
Lights
red when the receiver is in
Standby
mode (off).
DISPLAY Window
STANDBY/ON
Remote
sensor
Display Window
Indicates current audio
RDS Data
stream
indicators
type
TUNED indicator
Indicates current
surround mode
STEREO indicator
Repeat playback
SLEEP indicator
mode indicators
MUTE indicator
D RPT ALL
PL II PROG
MUTE
RDS
PTY
TUNED
RT
STEREO
SLEEP
PCM
TITLE
CHPTRK
Indicates
current
title
Programmed
playback active
number
Indicates current
Indicates current
track
player function:
Playback, Pause,
chapter
or
number
Total
playing time/Elapsed time/Frequency/
Sleep time/Surround mode/Volume etc.
etc.
indicators
7
Remote Control
POWER
OPEN/CLOSE
FUNCTION SELECTOR
You
also select the desired
can
function with the FUNC./PLAY
on
NUMBER
the front
SLEEP
panel.
(p. 29)
SUBTITLE
AUDIO
SOUND
SETUP
(p. 22)
(p. 14)
(p. 16)
use
selection
in
highlighting
on a
GUI
a
display
included
DISPLAY
(p. 15)
(p. 22)
Use the TITLE button to
menu
display
the title
included
screen
DVD video discs.
screen.
on
(p. 22)
SLOW SCAN
Use the MENU button to
the
(p. 20, 26)
TITLE
screen, TITLE and MENU
MENU
RETURN
ENTER
ARROW
For
(p. 22)
(Q
/
R)
(p. 21)
menu screen
DVD video
on
discs.
VOLUME
(+/-)
PRESET(+/-) (p. 30)
SKIP/SCAN
STOP
PAUSE/STEP
MUTE
PLAY
MARKER(p.
SEARCH (p.
ANGLE (p.
ZOOM (p.
PTY
PTY SEARCH
(p. 25)
CLEAR (p. 21)
REPEAT (p. 21, 24)
REPEAT A-B (p. 21)
22)
22)
22)
22)
press the buttons.
Distance: About 20 ft
remote
(p. 29)
(p. 31)
(p. 31)
(p. 31)
Point the remote control at the remote
Angle:
) (p. 20)
PROGRAM
REMOTE CONTROL BATTERY INSTALLATION
REMOTE CONTROL OPERATION RANGE
remote
/
(p. 29)
DIMMER
RDS
(
sensor
and
Remove the
battery
of the remote
(6 m)
from the front of the
cover on
control, and insert
R03
(size AAA) batteries
aligned correctly.
sensor
the
with
rear
two
and
About 30° in each direction in front of the
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
8
Rear Panel
POWER CORD
FM Antenna Connector
SPEAKER Connectors
AUXILIARY INPUT Connectors
Introducin
AUX IN
66
8
6
6
6
S-VIDEO OUT MONITOR OUT
S-VIDEO OUT Connector
MONITOR OUT Connector
AM
Do not touch the inner
permanent damage
pins
of the
jacks
on
the
rear
panel.
Loop
Electrostatic
Antenna Connectors
discharge may
cause
to the unit.
9
Installation and
Setup
TV Connections
Make
the
of the
following connections, depending
capabilities of your existing equipment.
one
on
Tips:
?
your TV and other equipment you wish
to connect, there are various ways you could connect
the DVD/CD Receiver. Use one of the connections
Depending
on
described below.
?
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
Caution
--
Make
sure
the DVD/CD Receiver is connected
to the TV. Select the correct AV
--
directly
your TV.
Do not connect your DVD/CD Receiver to TV via your
VCR. The DVD image could be distorted by the copy
input
on
protection system.
Rear of TV
Video connection
S-VIDEO
SCART INPUT
Connect the MONITOR OUT
Receiver to the VIDEO IN
video cable
jack
jack on
VIDEO
INPUT
AUDIO INPUT
INPUT
from the DVD/CD
L
the TV
using
R
L
the
supplied (V).
V
S
S-Video connection
Connect the S-VIDEO OUT
DVD/CD
Receiver to the S-VIDEO
TV
S-Video cable
jack on the
IN jack on the
using
the
VIDEO Cable
(S).
T
Tip:
Rear of DVD/CD receiver
SCART-RCA
Adaptor
If you want to connect the DVD/CD receiver to a TV with
SCART socket, use the SCART-RCA adapter (T).
AUX IN
S-V
TV/MONITOR
OOUT
MON
ROUT
(SCART type)
Rear of DVD/CD receiver
10
External
Equipment Connections
Connection
Rear of VCR
(L/R) jacks on the DVD/CD
receiver to the AUDIO OUT (L/R) jacks on the VCR,
LD player, etc using the audio cables.
(or
LD
player, etc)
Connect the AUX IN
AUDIO OUTPUT
VIDEO
OUTPUT
R
L
Tip:
Press AUX
these
on
the remote control to select
input
to
jacks.
AUX appears
on
the
Display
Window.
AUX IN
S-
Aerial Connections
Connect the
supplied
FM/AM aerial for
InstaliodSeup
DEO OUT MONITOR OUT
AM
listening
Loop aerial
(supplied)
to the
radio.
Connect the AM
loop
aerial to the AM aerial
connector.
Connect he FM wire aerial to the FM aerial
connector.
Notes:
?T
prevent noise pickup, keep the AM loop aerial away from
the DVD/CD receiver and other components.
?
?
o
Be
fully extend the FM wire aerial.
After connecting the FM wire aerial, keep it
possible.
sure
to
as
horizontal
as
FM Wire aerial
(supplied)
AUX IN
S-VIDEO OUT MONITOR OUT
11
Speaker System Connection
Connect the
the
speakers using
To obtain the best
possible
supplied speaker
surround
cords.
sound, adjust the speaker parameters (volume, distance, etc.).
Front
speaker
(Right)
Front
Center
speaker
(Left)
speaker
AUX IN
66
8
6
6
6
S-VIDEO OUT MONITOR OUT
Rear
speaker
(Right surround)
Rear
speaker
(Left surround)
Subwoofer
Notes:
?
Be
sure
to match the
speaker
cable to the
appropriate
terminal
on
the
components:
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
?
If you
use
speakers.
12
front
speakers
with low maximum
input rating, adjust
the volume
carefully
to avoid excessive
output
on
the
Speaker Positioning
In the
of normal
case
position
use
the 6
speakers (2
front
centre
speakers,
speaker,
2
and
speakers
rear
subwoofer).
If you want to
a subwoofer.
?F
play
the excellent bass
sound, DTS digital surround
Dolby Digital surround,
you should connect
r ont
speakers
According to your listening position set up
interval between speakers to 45 degree.
?
or
the
speakers
for
equal
distance. And
by hearing position
set up the
Centre
The
speaker
centre speakers
and front
speakers
the
ideally
are
same
But
height.
normally place
it above
or
below the
television.
?
Rear
speakers
Place left and right
behind the
for surround sound
playback.
position and install them
speakers towards a wall
?
In the
case
of
other,
and set the
a
smaller
rear
listening
For best
These
results, do
speakers
or
or
ceiling
to further
disperse
size, if the audience is
speakers
above 60
-
90
cm
InstaliodSeup
recreate sound motion and
not install the
above the level of the listener's
at
room
area.
rear
ears.
speakers
too far
atmosphere required
behind the listening
It is also effective to direct the
rear
the sound.
near
to the
rear
than the listener's
wall set the
rear
speakers opposite
each
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Rear
Speaker
Speaker
(Left)
Front
Speaker
(Right)
Speaker
(Left)
Rear
Speaker
(Right)
Speaker Positioning Example
13
Mini
Glossary
for Audio Stream
& Surround Mode
Sound Mode
You
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
of the
program you want to listen to.
Allows you to
enjoy 5.1(or 6)
discrete channels of
high
audio from DTS program sources such as
DVD and compact discs, etc.bearing the trademark.
quality digital
discs,
DTS
Digital
transparent
Surround delivers up to 6 channels of
audio(which means identical to the original
and results in
masters)
360 degree
Technology,
Technology,
exceptional clarity throughout
sound field. The term DTS is
a
a
Each time you press SOUND button, the sound mode
is changed in the following order;
BYPASS
true
trademark of DTS
LLC. Manufactured under license from DTS
→
THEATER 1
(This
STUDIO
→
→
CLUB
CHURCH
→
→
HALL
→
PLII MOVIE
function available 2-channel mode
...
only)
LLC.
When DVD is inserted.
You
The
Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital
mark, you can
program source. If you play DVDs with
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
"
Use this mode when
"
which carries the
effect of
being
effect with
DOLBY
an
in
a
"
PRO
clearer and
LOGIC
more
or
Dolby Digital
mark. This mode
which
can
or
2 channel
provides
only
the
remote
during playback.
Although the DVD contents differ from disc to disc, the
following explains the basic operation when this feature
Each time you press AUDIO button, the sound mode of DVD
is changed as the following order;
→→
be obtained
The
effect
through
of
the
image, as well as
sound image, is much
For your reference
?
before.
(II)
Pro
Logic
II creates five full-bandwidth
from two-channel
sources.
output channels
This is done using an advanced,
high-purity matrix surround decoder that extracts the spatial
properties of the original recording without adding any new
sounds
or
MOVIE mode:
The Movie mode is for use with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
BYPASS
according
14
to the way it
was
recorded.
signals
is
played
for each source
individually.
You can identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled
with the
logo.
DTS Digital Surround discs are marked with DTS.
-
-
-
tonal colorations.
Software with multichannel surround audio
The DVD/CD receiver memorizes the last mode
settings
?
Dolby
is
used.
the
movement of the sound
position in
dynamic than
PRO
live concert house-an
SURROUND.
of fixed
sense
movie
movie theatre
intensity
front/back/left/right
the
playing
"
change the sound mode of DVD (Dolby Digital, DTS,
LOGIC, etc) by pressing the AUDIO button on the
can
On-Screen
You
Display
the
the TV
general playback status on
screen. Some items can be changed using the
To use the on-screen display:
display
can
menu.
Example: On-Screen Display during
playing DVD
Selection Method
Items
Title Number
1/3
b /
B, Numbers
ENTER
Press DISPLAY
1.
during playback.
Press v / V to select
2.
The selected item is
Press b / B to
3.
item.
an
highlighted.
the
change
the number buttons if
use
inputting
the title
Chapter
For
press ENTER to execute the
some
1/12
also
functions,
0:20:09
language
and Digital Audio
Output mode
b/Bor
AUDIO
setting.
language
ABC
Some discs may not
shown below.
?I f
no
button is
provide
for 10
pressed
display disappears.
screen
all of the features
seconds, the
on-
PLAYBACK STATUS/RESTRICTIONS
Title
A-B
#1
123
1/9
Repeat
title
Repeat
sequence
Enter
Marker
a
Marker Search
Angle
SUBTITLE
ANGLE
Sound
BYPASS
Action
play
Selection Method
Track Number
from this
prohibited
or
(or
PBC
1/3
B, Numbers
Numbers
0:20:09
ENTER
b/Bor
Audio Channel
Sound
b /
ENTER
mode)
point
not available
b/B
Example: On-Screen Display during
playing VCD
Time search
Resume
InstaliodSeup
b/Bor
1/3
Items
menu
b/Bor
1 ENG
Notes:
?
Numbers, ENTER
Audio
Subtitle
B, Numbers
ENTER
Time search
setting. You can
appropriate (e.g.
number).
Number
b /
AUDIO
BYPASS
b/B
15
Initial
LANGUAGE
Settings
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 16 to 19.
To
display
LANGUAGE
OSD
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
and exit the Menu:
Press SET UP to
display
the
menu.
SET UP will take you back to initial
A second press of
screen.
Move
To go to the next level:
Press B on the remote control.
OSD
To go back to the previous level:
Press b on the remote control.
display.
Select
language
a
for the
Setup
Disc Audio / Subtitle / Menu
GENERAL OPERATION
menu
Select
and
DVD
Select the
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
1.
Press SET UP. The
2.
Use v / V to select the desired option then press
B to move to the second level. The screen shows
the current setting for the selected item, as well as
alternate setting(s).
Setup
menu
appears.
3.
Use v / V to select the second desired
press B to move to the third level.
4.
Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require additional steps.
5.
Press SET UP
or
PLAY to exit the
option
Setup
on-screen
then
Original:
Refers to the
disc
recorded.
was
original language
track
in which the
Other: To select another
language, press number
buttons then ENTER to enter the corresponding 4-digit
number according to the language code list on page 32.
If you enter the wrong language code, press CLEAR.
DISPLAY
menu.
DISPLAY
TV
16:9
Aspect
Display
Mode
Widescreen
Move
TV
DVD
Aspect
4:3: Select when
a
16:9: Select when
Display
Display
Select
Mode
Mode
standard 4:3 TV is connected.
a
16:9 wide TV is connected.
DVD
setting
works
only
when the TV
Aspect
mode is set to "4:3".
Letterbox:
upper and
16
Displays a wide picture with
lower portions of the screen.
bands
on
Automatically displays the wide picture
screen and cuts off the portions that do not
the
Panscan:
on
entire
fit.
the
AUDIO
LOCK
Each DVD disc has
Set the receiver's
(Parental Control)
LOCK
of audio
variety
output options.
AUDIO options according to the
a
type of audio system you
use.
Rating
Unlock
Password
****
Country
Code
GR
AUDIO
5.1
Select
Speaker Setup
DRC
On
Vocal
On
Move
DVD
Rating
Some movies contain
Move
DVD
5.1
Select
DivX
Speaker Setup
Select speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "5.1 Speaker Setup", page 19.)
for children to view.
Control
(DRC)
format, you
can
hear
country. Some discs offer
program's
a
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
This allows you to listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
suitable
InstaliodSeup
scenes as an
alternative.
The
control feature allows you to block
to scenes below the rating you input, thereby
parental
1. Select
"Rating"
on
the LOCK
menu
then
press B.
2. To
Rating, Password and Country Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
access
the
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
DVD
3. Select
Set Vocal to On
DVD is
more
your children from being able to view
material you believe is unsuitable.
soundtrack in the most accurate and realistic
Vocal
Many
preventing
DVD
With the DVD
that may not be suitable
of these discs contain
scenes
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
access
Dynamic Range
Select
playing.
only
when
a
rating
a
from 1 to 8
using
the v / V buttons.
multi-channel karaoke
The karaoke channels
mix into normal stereo sound.
on
the disc will
Rating
1-8:
restrictions
Rating one (1) has
and rating eight (8)
the most
is the least
restrictive.
Unlock
If you select
and the disc
unlock, parental control is
plays
not active
in full.
Notes:
If you set
the same
scenes
rating for the receiver, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
available
a
on
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
same
is
the disc.
4. Press ENTER to confirm your rating
press SET UP to exit the menu.
selection, then
17
Password
You
(Security Code)
enter
can
PBC
change password.
or
1. Select "Password"
on
the LOCK
Set
menu
then press
B.
VCD
Playback
Control
(PBC)
On: Video CDs with PBC
to On
or
Off.
are
played according
are
played
to the PBC.
2. Follow
"New" is
as
shown left
or
Off: Video CDs with PBC
way
new
4. Press SETUP to exit the
as
forget
DivX(R) Registration
You
menu.
can
DivX
show the DivX DRM
(Digital Right
code for your unit
only.
Security Code
your
If you forget your security code you
the following steps:
1.
Press SETUP to
2.
Input
the
same
Audio CDs.
Management) Registration
If you
the
then press ENTER.
4-digit code,
again to verify.
it
(Rating). "Change"
highlighted.
3. Enter the
Input
2
step
6-digit
the
display
can
Setup
clear it
using
menu.
number "210499" and the
security
code is cleared.
3.
Enter
a new
code
as
described above.
The
Note:
When
"
"
appears on the TV
screen, press STOP and then press SET UP to move
to the setup menu.
INPUT PASSWD
Country
DVD
Code
Enter the code of the
were
country/area
used to rate the DVD video
list
on
1.
Select
whose standards
disc, based
the
on
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental
encrypt
move
file.
Notes:
If you rent the DivX VOD file, it has several
viewing limits as show below.
?
Display
the number which you
page 32.
"Country
Code"
the LOCK
on
menu
then
press B.
2.
Follow
3.
Select the first character
4.
Press ENTER and select the second character
using
5.
step
2
as
shown left
(Rating).
using
v / V buttons.
v / V buttons.
Press ENTER to confirm your
selection.
country
?
code
The rental has been
expired.
OTHERS
The PBC and
DivX(R) Registration settings
changed.
be
?
OTHERS
PBC
On
DivX(R) Registration
Select
Move
18
can
Select
an
Display
the authorization
error.
can
options
watch the file.
of
5.1
Speaker Setup
This
to
chapter includes important reference
help you set your DVD/CD receiver.
information
If you connected speakers to your DVD/CD receiver,
setting the Distance lets the speakers know how far
SPEAKER SETUP
Make the
for the built-in 5.1 channel
following settings
Distance
the sound has to travel to reach your set listening
point. This allows the sound from each speaker to
reach the listener at the
surround decoder.
Press b / B to
1.
2.
Press SETUP. The
menu
Use v / V to select the
press B to
move
option
then press
Note:
You
Speaker Setup option
adjust the Distance of Center speaker
speakes (Left & Right) only.
can
Rear
to the third level. "Select" is
Speaker Setup
menu
Front Left
AUDIO
of each
signals
the volume to match the volume of
memorized in the
appears.
Rear
speaker. Adjust
test signals
system.
(L)
Right (R)
→
Center
→
→
Front
Rear Left
(L)
Right (R)
→
→
SubWoofer
Front L
Speaker
Size
Small
Volume
0
dB
Distance
2
m
Test
InstaliodSeup
Test
Press b / B to test the
Press ENTER and 5.1
and
then
highlighted.
4.
the Distance of the selected
appears.
to the second level.
move
time.
speaker.
Use v / V to select the AUDIO
B to
3.
setup
adjust
same
Off
Select
Move
Return
Enter
5.
Use b / B to select the desired
6.
Adjust options using
7.
Press ENTER to confirm your selection. Returns to
the previous menu.
speaker.
v / V / b / B buttons.
Speaker
Select
speaker that you want to adjust. (Front
speakers (Left), Front speakers (Right), Center
Speaker, SubWoofer, Rear speakers (Left), or Rear
speakers (Right))
a
Note:
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Size
Since the
speaker settings
change the settings.
are
fixed, you
cannot
Volume
Press b / B to
adjust the output
speaker. (-5dB +5dB)
level of the selected
~
19
Operation
Playing
a
DVD
or
Video CD
General Features
Note:
PLAYBACK SETUP
Unless stated
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the playback
1.
side down.
Press OPEN/CLOSE to close the
2.
starts
automatically.
If
playback
some
use
the remote control. Some features may also be
available on the Setup menu.
MOVING TO ANOTHER TITLE
tray. Playback
does not start,
When
a
disc has
than
more
title, you
one
to
can move
another title. Press DISPLAY while
press PLAY.
In
otherwise, all operations described
cases, the disc
menu
might
appear
instead:
stopped
B to
You
playback is
appropriate number (0-9) or use
then the
move
to another title.
play any title by inputting
playback is stopped.
Use the bBvVbuttons to select the
b /
its number while
can
title/chapter
you want to view, then press ENTER to start.
Press TITLE or MENU to return to the menu
MOVING TO ANOTHER CHAPTER/TRACK
screen.
When
Use the number buttons to select the track you
want to view and press RETURN to return to the
menu screen.
Menu
settings
and
operating
another
"PBC"
on
page
18).
parental control is set and the disc is not within
the rating settings you must input the password.
(See "LOCK" on page 17).
chapter/track
Press SKIP .
track, you
one
one
chapter
can move
or a
to
follows:
as
>
?
Press SKIP . twice
?T
or
briefly
to
step back
region
code for this receiver is 2
o
go
to any
directly
to the
chapter during
DVD
playback,
numberoruseb/B.
SEARCH
1.
Press and hold SKIP/SCAN .
two seconds
2.
now
> for about
go into SEARCH mode.
Press and hold SKIP/SCAN .
repeatedly
or
during playback.
The receiver will
to select the
or
>
required speed:
DVD; X2, X4, X8, X16 or X100
Video CD, DivX disc; X2, X4, X8, X16
3.
To exit SEARCH
mode, press PLAY.
CHANGING THE AUDIO CHANNEL
Press AUDIO
different
20
to
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
?D VDs may have a region code. Your receiver does
not play discs that have a region code different from
(two).
than
than
previous chapter/track.
If
your receiver. The
more
more
briefly during playback
select the next chapter/track or to return to the
beginning of the current chapter/track.
Notes:
?
disc has
on a
?
may differ. Follow the instructions on
the each menu screen. You also may set PBC to
(See
title
disc has
procedures
Off
a
repeatedly during playback to hear
audio channel (Stereo, Left, or Right).
a
STILL PICTURE AND FRAME-BY-FRAME
REPEAT
PLAYBACK
You
Press
1.
2.
Press PAUSE/STEP
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
To exit still motion
on
DVD Video Discs
?
mode, press PLAY.
required speed: t 1/2, t 1/4, t 1/8, t 1/16
(backward), or T 1/2, T 1/4, T 1/8, T 1/16
(forward).
CD, the Slow speed changes: T 1/2,
T 1/4, T 1/8, or T 1/16 (forward).
3.
Title:
repeats the
?
Off
does not
To exit Slow Motion
?
All
?
Off
repeats all the tracks
:
:
does not
on a
disc.
play repeatedly.
OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the repeat function (See "PBC" on
page 18).
?
If you press SKIP
(Track) playback,
(>)
the
during Repeat Chapter
repeat playback cancels.
once
TIME SEARCH
mode, press PLAY (N).
To start
Note:
1.
playback
play repeatedly.
?
Video
Slow motion
:
current title.
Notes:
UsetheSLOWSCAN-morM+toselectthe
a
?
-
PressSLOWSCAN-morM+during
playback.
With
Repeat Chapter/Title/Off
Chapter: repeats the current chapter.
-
Video CDs, DivX discs Repeat Track/All/Off
?
Track : repeats the current track
The DVD/CD Receiver will enter SLOW mode.
2.
a
repeat mode.
SLOW SCAN
1.
title/chapter/all/track on a disc.
REPEAT during playback to select a desired
play
can
in
reverse
is not
possible
with
playing
at any chosen time
Press DISPLAY
box shows the
Video CDs.
2.
on
the disc:
during playback. The
elapsed playing time.
time search
Press v / V to select the time clock icon
and "-:--:--" appears.
REPEAT A-B
3.
repeat
1.
Press REPEAT A-B at your chosen starting
"A-" appears briefly on the TV screen.
2.
required
start time in
again
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
sequence.
Press REPEAT A-B
the
seconds from left to
To
a
Input
point.
4.
right.
Press ENTER to confirm.
Playback
starts from the
selected time.
at your chosen end
point.
"A-B" appears
briefly on the
repeat sequence begins.
3.
Press REPEAT A-B
again
TV
screen
to cancel.
and the
Note:
OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the Time Search function (See "PBC"
on page 18).
?
21
ZOOM
Use
Special
to
zoom
enlarge
Press ZOOM
1.
the video
image.
during playback
or
still
playback
to
Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→
800% size →1600% size
Use the bBvVbuttons to
3.
zoomed
→
through
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DVD
MENU. Input the corresponding number or use the
bBvVbuttons to
100% size
move
CHECKING THE CONTENTS OF DVD
DISCS: MENUS
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2.
DVD Features
highlight
your selection.
Then press ENTER.
the
picture.
TITLE MENU
Note:
?
Zoom may not work
on some
MARKER SEARCH
To enter
You
points.
desired
the TV
point
a
from up to nine memorized
marker, press MARKER at the
the disc. The Marker icon appears
briefly. Repeat to enter up to nine
1.
2.
or
Clear
During
disc
search
menu
Within 10
a
Press ENTER and
marked
MENU
press SEARCH. The marker
appears on the screen.
b / B to select
scene.
playback
or
a
marker
clear.
starts from the
Or, Press CLEAR and the marker
number is erased from the list.
4.
You
on
any marker by inputting its number
the marker search menu.
can
subtitle
play
angles,
as camera
options,
and
DISC MENU
again
playback,
seconds, press
offers features such
Press MENU and the disc
Marked Scene
number that you want to recall
3.
may appear.
screen.
on
markers.
To Recall
menu
menu
on
menu, the
Otherwise, the disc
a
Press TITLE to exit.
3.
on
screen
appears
spoken language and
chapters for the title.
playback
To enter
the
menu
The
2.
Marker
a
start
can
Press TITLE. If the current title has
1.
DVDs.
menu
is
displayed.
Press
to exit.
CAMERA ANGLE
If the disc contains
scenes
recorded at different
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
camera
Tip:
The
PAUSE
indicator will blink
angle
recorded at different
1.
Press PAUSE/STEP
2.
To return to
during playback.
playback,
press PLAY.
switching
is
angles
on
the TV
as an
during scenes
that angle
screen
indication
possible.
CHANGING THE AUDIO LANGUAGE
Press AUDIO
different
repeatedly during playback
audio language or audio track.
to hear
a
SUBTITLES
Press S-TITLE
different
repeatedly during playback
subtitle languages.
to
see
the
Notes:
?
The subtitle file of the DivX file is
displayed only smi,
srt
and sub.
?
If there is no information or there is a code that
read in the DivX file,
1/1
etc are displayed.
"
22
"
can
not
Playing
an
Audio CD
or
MP3/WMA
Disc
The DVD/CD receiver
recordings
on
play
can
MP3/WMA formatted
CD-ROM, CD-R,
or
CD-RW discs.
MP3 / WMA disc
limited
?
Audio CD
or
ENTER and
playback
starts.
?
?
?
Audio CD
List
Program
Track1
Track8
Track2
Track3
Track3
Track12
Track4
Track7
Track5
Track6
Track6
Track9
Track7
Track1
Track8
Track10
?
48 kHz (MP3),
Sampling frequency:
within 24 48kHz (WMA)
Bit rate: within 32 320kbps (MP3),
40
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
MP3 / WMA
2.
-
-
File
an
names
and must
?
Press v / V to select
see
is
follows:
within 32
creates
?
to
player
-
1/12
0:00:00
1.
with this
-
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY
as
compatibility
a
folder, and press ENTER
the folder contents.
Press v / V to select
ENTER.
track then press PLAY
or
should have
incorporate
system.
a
an
should not contain
maximum of 8 letters
.mp3 or .wma extension.
special letters such as /
?*:"<>letc.
?
starts.
Playback
0:00:00
a
They
ISO 9660 file
The total number of files
on
the disc should be
less than 999.
This DVD/CD receiver
requires
discs and
recordings
to meet certain technical standards in order to
1/104
achieve
MP3 / WMA
Program
List
DVDs
1-Music1
There
optimal playback quality. Pre-recorded
are automatically set to these standards.
Operation
many different types of recordable disc
formats (including CD-R containing MP3 or WMA
2-Music2
3-Music3
4-Music4
5-Music5
files)
6-Music6
7-Music7
are
and these
conditions
require certain pre-existing
(see above) to ensure compatible
playback.
Customers should note that
Tip:
?
If you
are
in
a
file list
return to the Folder
the MP3/WMA
on
list,
use
the v / V to
menu
and want to
and
highlight
press ENTER.
?
On
CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MP3/WMA
or
JPEG word
use
top of the
menu
b / B to select MP3/WMA
or
is
highlighted.
Then
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
should
a
on
required
permission
always
be
sought
from the
copyright
owner.
JPEG then press ENTER.
23
Audio CD and MP3 / WMA Disc
Features
SEARCH
PAUSE
1.
2.
Press PAUSE/STEP
during playback.
To return to
press
1.
playback, press PLAY,
PAUSE/STEP again.
Press and hold SKIP/SCAN .
two seconds
ENTER
or
3.
1.
Press SKIP
(.
>) briefly during playback
track or to return to the beginning
or
to go to the next
of the current track.
2.
3.
Press SKIP . twice
previous
track.
You
play
can
any track
briefly
to go back to the
by inputting
its number.
REPEAT TRACK/ALL/OFF
You
1.
can
play
a
track/all
on a
Press REPEAT when
disc.
playing
a
disc. The
repeat
icon appears.
2.
Press REPEAT to select
?
?
?
24
a
desired
repeat mode.
TRACK:
repeats the current track
ALL: repeats all the tracks on a disc.
Off(No display):
does not
play repeatedly.
go into SEARCH mode.
to select the
X8 backward
MOVING TO ANOTHER TRACK
now
Press and hold SKIP/SCAN .
repeatedly
> for about
during playback.
The receiver will
2.
or
or
To exit SEARCH
or
>
required speed: X2, X4,
forward.
mode, press PLAY.
Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the receiver memory. A
program
1.
contain 300 tracks.
can
Insert
REPEAT PROGRAMMED TRACKS
1.
Audio CD
or
AUDIO CD
or
2.
MP3/WMA Discs:
MP3/WMA
menu
appears.
Press REPEAT to select
?
?
0:00:00
1/12
0:00:00
Audio CD
1/104
MP3 / WMA
List
JPEG
?
List
Program
Program
Tr ack1
Track8
Music Folder 1
Tr ack2
Track3
Music Folder 2
Tr ack3
Track12
Music Folder 3
Tr ack4
Track7
Music Folder 4
Tr ack5
Track6
Music Folder 5
Tr ack6
Track9
Tr ack7
Track1
Tr ack8
Track10
Music Folder 7
or
select
MP3/WMA Menu
track
"
the
on
then press PROGRAM
"List",
icon then press ENTER to
the selected track on the "Program" list.
place
Repeat
to
(Add)"
can
place
additional tracks
on
4.
"
(Add All)"
icon
page.
5.
To
resume
repeats the current track
ALL: repeats all the tracks on programmed list.
Off(No display):
or
does not
play repeatedly.
Use vVto select the track that you wish to
from the Program list.
Press CLEAR.
Or, select
"
(Delete)"
erase
icon then
press ENTER to place the selected track on the
Program list. Repeat to erase additional tracks on
LIST
ENTER to start.
Playback begins
programmed the tracks.
list have
played
normal
playback
on
"
(Del all)",
then press
Operation
ENTER.
Note:
The programs
the order in which you
Playback stops after all of the tracks
"Program"
TRACK:
Use v / V to select
Select the track you want to start playing on the
"Program" list. Press and hold v / V to move to the
Press PLAY
repeat mode.
ERASING THE COMPLETE PROGRAM
add all tracks in the disc. Select
next/previous
desired
the list.
then press ENTER.
3.
a
the list.
Note:
You
repeat
Music Folder 8
2.
a
disc. The
LIST
Music Folder 6
Audio CD Menu
Select
a
ERASING A TRACK FROM "PROGRAM"
1.
2.
playing
icon appears.
disc.
a
Press REPEAT when
are
also cleared when the disc is removed.
in
the
once.
from
programmed
AUDIO CD (or
playback, select a track of
MP3/WMA) list and then press
PLAY.
25
Viewing
JPEG Disc
a
Press b / B
this DVD/CD receiver you can view Kodak
PICTURE CDs and discs with JPEG files.
Using
1.
Insert
disc and close the
a
appears
on
the TV
tray. The JPEG
picture
during showing
clockwise
or
JPEG disc
limited
?
JPEG
Preview
JPEG Folder 1
JPEG Folder 2
JPEG Folder 3
compatibility
JPEG Folder 6
upon the size and number of JPEG
files, it could take a long time for the DVD/CD
receiver to read the disc's contents. If you don't
Depending
2048
Press v / V to select
folder,
a
and press ENTER.
list,
the v / V buttons
use
on
to the
?
?
or
PLAY.
?
to
move
:
Speed options
>
(Slow), >> (Normal), >>> (Fast) and II (off).
Use vVbBto highlight the Speed. Then, use b / B
select the option you want to use then press ENTER.
If you set Speed option to Off, Slide is not active.
STILL PICTURE
to
the
(Slide Show)
then
JPEG
Press PAUSE/STEP
The Receiver will
during
now
To return to the slide
PA USE/STEP
slide show.
go into PAUSE mode.
show, press PLAY
Press SKIP
(.
or
press
again.
MOVING TO ANOTHER FILE
26
them
names
or
>)
once
to advance to the next
while
or
JPEG
viewing
previous file.
a
copying
into the CD
".jpg"
layout.
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
the files
Windows
press ENTER.
picture
File
though
JPEG
highlight
the disc
If the files have
rename
four Slide
are
on
Ensure that all the selected files have the
able to be read
Use vVbBto
2.
The total number of files and folders
extensions when
viewing a file, you can press STOP
previous menu (JPEG menu).
SLIDE SHOW
1.
and burn another disc.
?
the
Tip:
There
pixels
Some discs may be incompatible due to a
different recording format or the condition of disc.
?
?
---
?
and press ENTER.
highlight
If you want to view a particular file, press
v / V to highlight a file and press ENTER
While
minutes,
should be less than 999.
A list of files in the folder appears.
If you are in a file list and want to return to the
3.
after several
of the files may be too large
reduce the
resolution of the JPEG files to less than 2760 x
JPEG Folder 8
remote to
display
some
JPEG Folder 7
Folder
with this receiver is
follows:
as
see an on-screen
JPEG Folder 5
previous
to rotate the
counter clockwise.
JPEG Folder 4
2.
picture
a
menu
screen.
List
JPEG
TO ROTATE PICTURE
by
".jpg"
this DVD/CD receiver. Even
are
Explorer.
extension will not be
shown
as
JPEG
image
files in
Maintenance and Service
Refer to the information in this
contacting
a
chapter
before
Please
The DVD/CD receiver is
shipping
?
?
high-tech, precision
device.
or
the unit
the
optical pick-up lens and disc drive parts are dirty
worn, the picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For
details, please
use.
contact your nearest authorized
service center.
the exterior surfaces clean
Do not
spray
a
If the
original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
save
Keeping
the Unit
service technician.
HANDLING THE UNIT
When
Maintaining
use
near
volatile
liquids
such
insecticide
the unit.
Do not leave rubber
plastic products in contact
long period of time. since they
or
with the unit for
a
leave marks
the surface.
Cleaning
as
on
the unit
To clean the
player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Do not
or
use
thinner,
strong solvents such
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
27
Playing
Using
1.
a
DivX Movie Disc
this DVD/CD receiver you
Insert
a
appears
disc and close the
on
the TV
can
play
DivX disc
compatibility
as
follows:
?A
v ailable
player
is limited
DivX disc.
tray. The DivX
menu
720x576
screen.
?
0:00:00
with this
The file
resolution size of the DivX file is under
(W
x
name
H) pixel.
of the DivX subtitle is available
20~40characters
1/12
by
(different by language).
DIVX
?
List
Movie Folder 1
If there is
impossible code to
file, it may be displayed as
display.
"
Movie Folder 2
Movie Folder 3
Movie Folder 4
Movie Folder 5
express in the DivX
mark on the
"
_
Movie Folder 6
Movie Folder 7
?
Movie Folder 8
If the number of the screen frame is
over
30
per 1 second, this unit may not operate
normally.
2.
Press v / V to select
a
folder, and press ENTER.
?
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons
on
the remote to
file is not
?
press ENTER.
If the file is recorded with
supports
3.
4.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
*
or
PLAY.
Press STOP to exit.
?
Be
to select "SUBTITLE ON" mode before
sure
DivX file
?
The Pro
subtile is
logic
only
more
than two
languages
in the
file,
available.
II Sound mode is not available for DivX file.
audio is
some
of
1-point
GMC, the unit
of the record level.
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
encoders, like DivX
There
are
called
1-point, 2-point,
or
Xvid, have this option.
different levels of GMC
or
3-point
encoding, usually
GMC.
a
ENTER every time.
When the subtile has
original
?
by pressing
playback
or
GMC?
MPEG4
Notes:
interleaved, either video
outputted.
and
highlight
If the video and audio structure of recorded
Playable
DivX file
z ".avi ",
".mpg ", ".mpeg
Playable
Codec format
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ", "MP42 ".
Playable
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
?
Sampling frequency: within 32 48 kHz
-
within 24
?
Bit
40
28
48kHz
(WMA)
rate: within 32
320kbps (MP3),
192kbps (WMA)
-
-
-
(MP3),
Additional Features
SLEEP TIMER SETTING
LAST SCENE MEMORY
You
can
set the DVD/CD Receiver to turn off
automatically
This receiver memorizes last
that is viewed. The last
scene
from the last disc
remains in memory
the disc from the receiver or switch
if you remove
off the receiver. If you load
even
memorized,
the
scene
is
a
disc that has the
automatically
time.
display
sleep
sleep
time.
time appears in the
window.
scene
recalled.
Each time you press SLEEP the
changes in the following order.
2.
setting
SLEEP180→150→120→90→80→70→60→50→40→
This receiver does not memorize the
switch off the receiver before
disc if you
to play the disc.
scene
commencing
of
appropriate system mode for your
TV system. If NO DISC appears in the display window,
press and hold PAUSE/STEP on the front panel or
a
more
than 5 seconds to be able to
system (PAL, NTSC,
or
AUTO).
When the selected
system does not coincide with
the system of your TV, normal colour picture may
not be
AUTO:
NTSC:
Note:
?
You must select the
remote control for
30→20→10→OFF
a
SYSTEM SELECT
displayed.
You
can
check the time
remaining
before the
DVD/CD receiver turns off.
Press SLEEP. The remaining time appears in the
display window.
DIMMER
This function will change the brightness of the display
window on the front panel during in power-on status.
Press the DIMMER
repeatedly.
MUTE
Select when DVD/CD Receiver is connected
Press MUTE to mute your unit.
with Multi
You
system TV.
Select when DVD/CD Receiver is connected
with NTSC-TV.
PAL:
specified
The SLEEP indicator and
Note:
select
a
Press SLEEP to set the desired
1.
scene
at
can
answer
display
mute your unit in
order, for example,
to
the telephone, "MUTE" indicator flashes in the
window.
Select when DVD/CD Receiver is connected
with PAL-TV.
29
the Radio Stations
Presetting
You
can
Before
preset
50 stations for FM and AM
make
tuning,
sure
Listening
Preset radio stations in the DVD/CD Receiver's
(MW).
that you have turned down
the volume.
on
the remote control until FM
appears in the
(MW)
display
AM
or
display
on
the
repeatedly
control to select the
or
on
the front
panel for about two seconds
frequency indication starts to change,
or
FM appears in the
window.
Press PRESET +/-
2.
Press and hold TUNING
(MW)
The last received station is tuned in.
BAND, FM and AM
(MW) changes alternately.
3.
radio stations"
(see "Presetting
Press BAND until AM
1.
window.
And then every time you press
2.
memory first
left).
Press BAND
1.
to the Radio
on
the remote
preset station you
want.
Each time you press the button, the DVD/CD Receiver
tunes in one preset station at a time.
until the
then
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on the
remote control repeatedly.
3.
release.
-
when the DVD/CD Receiver tunes in
Scanning stops
station. "TUNED" and "ST."
in the
display
A
preset
panel
the front
on
number will flash in the
to select the
display
on
the front
select another function mode
window.
preset number you
on
Press POWER to turn the DVD/CD receiver off
panel.
or
Press MEMO./STOP
6.
appear
To turn off the radio
Press TUNING
5.
program)
window.
Press MEMO./STOP
4.
stereo
(for
a
the front
want.
For manual
The station is stored.
7.
Repeat steps
on
3 to 6 to store other stations.
or
automatic
tuning,
station with
a
Press TUNING
weak
a
For automatic
repeatedly
or
3 to tune in the station
front
signal
in
Press and hold MEMO./STOP for about two seconds
appeared
in the
display
and then press MEMO./STOP
cleared.
again,
the stations
window
are
If you have accidentally entered into the "CLEAR
ALL" mode and you do not wish to clear the
memory, do not press any key. After a few seconds,
change
display
will go off
by
itself and
to normal mode.
Note:
already
been
entered, the FULL
message will appear in the display window for
moment and then a preset number will flash.
To
change
above.
30
the
preset number, follow the steps
a
5-6
step
2.
tuning,
or
panel repeatedly.
press and hold TUNING
for about two seconds
a
on
the
can use
preset radio station directly
the number buttons
to select
a
1 then 9
(within
on
as
the remote control
preset radio station directly.
For example, to listen to preset station 4, press 4 on
the remote control. To listen to preset station 19, press
3
seconds).
For your reference
If an FM program is
Press MONO/ST.
noisy
panel so that
"STEREO" disappears in the display window.
There will be no stereo effect, but the reception
improve. Press the button again to restore the
on
the front
stereo effect.
If all stations have
in
panel.
To select
manually.
To clear all the stored stations
the "CLEAR ALL"
tuning
step
You
and "CLEAR ALL" is
AUX).
press TUNING
the front
or
To tune in
or
To listen to non-preset radio stations
Use manual
panel again.
(CD/DVD
or
To
improve reception
Reorient the supplied antennas.
will
RDS
Operation
This unit is
which
Programme
with RDS
equipped
brings a wide range
Now in
Data
(Radio
System),
of information to FM radio.
in many countries, RDS is a
station call signs or network
use
A
transmitting
description of
system for
information,
a
station programme type text message
about the station or specifics of musical selection and
Search
(PTY)
ability to encode
broadcasts with Programme Type (PTY) codes that
indicate the type of material being broadcast. The
following list shows the abbreviations used to
indicate each PTY along with an explanation of the
major
benefit of RDS is its
PTY.
NEWS
News
AFFAIRS
Current Affairs
RDS TUNING
INFO
Information
When
SPORT
Sports
EDUCATE
Educational
DRAMA
Drama
programme (PS), programme type recognition (PTY),
Radiotext (RT) and Clock Time (CT) if transmitted by
CULTURE
Culture
SCIENCE
Science
the station.
VARIED
Varied
POP M
Popular
ROCK M
Rock Music
EASY M
Easy Listening
LIGHT M
Light
CLASSICS
Classical Music
OTHER M
Other Music
WEATHER
Weather Information
FINANCE
Financial
CHILDREN
Children's
SOCIAL
Social Affairs
RELIGION
Religious
Broadcasts
PHONE IN
Phone-In
Programmes
TRAVEL
Travel and
Window.
LEISURE
Leisure and
RT
A "text" message contains special
information from the broadcast station. Note that
JAZZ
Jazz Music
COUNTRY
Country
this message may scroll
NATION M
National Music
OLDIES
Oldies Music
FOLK M
Folk Music
DOCUMENT
Documentary Programmes
TEST
Station Alarm Test
ALARM 1
Emergency
the correct time.
a
FM station is tuned in and it contains RDS
data, the unit will automatically display the station's
call
sign
Window
and the RDS indicator will
well
as
as
light
in the
Display
indicators for the RDS services
RDS DISPLAY OPTIONS
The RDS
system is capable of transmitting
a
wide
of information in addition to the initial call
variety
that appears when
RDS operation the
a
sign
station is first tuned. In normal
display
will indicate the station
name, broadcast network or call letters. Pressing RDS
on the remote control enables you to cycle through
the various data
types in the sequence:
(PS↔FREQUENCY↔PTY ↔RT↔CT)
PS
(Programme Service name)- The name
channel is shown in the Display Window.
PTY
the
(Programme type recognition)programme type is shown in the Display
name
of
(Radiotext)-
permit
CT
The
of the
across
the
display
to
message.
(Time
controlled
by
the
channel)-
Enables the
unit to receive the actual time and show it in the
Display
Window.
Note:
Some RDS stations may not choose to include
some of these additional features. If the data
required
for the selected mode is not
being
transmitted, the Display Window will show a PTY
NONE, RT NONE, CT NONE, PS NONE message.
Speech Programme
Music
Music
Music
Programmes
Programmes
Programmes
Touring
Hobby
Music
Message
Broadcast Information
You may search for a specific Programme
(PTY) by following these steps:
1.
Press BAND to select FM mode.
2.
Press PTY
on
the remote
will show the last PTY in
3.
Press PTY
4.
When the PTY is
repeatedly
Type
control, the display
use.
to select
a
desired PTY.
selected, press PTY SEARCH.
The unit will go into an automatic search mode.
When a station is tuned, the search will stop.
31
Language Codes
Use this list to
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Galician
7176
7771
Somali
8379
6577
Georgian
7565
7783
Spanish
6983
Arabic
6582
German
6869
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
Greek
6976
Maltese
7784
Swahili
8387
Assamese
6583
Greenlandic
7576
Maori
7773
Swedish
8386
Azerbaijani
6590
Guarani
7178
Marathi
7782
8476
Bashkir
6665
Gujarati
7185
Moldavian
7779
Tagalog
Tajik
Basque
Bengali; Bangla
6985
Hausa
7265
Mongolian
7778
Tamil
8465
6678
Hebrew
7387
Nauru
7865
Tatar
8484
Bhutani
6890
Hindi
7273
7869
Telugu
8469
Bihari
6672
Hungarian
7285
7879
Thai
8472
Breton
6682
Icelandic
7383
7982
Tibetan
6679
Bulgarian
6671
Indonesian
7378
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Burmese
7789
Interlingua
7365
Pashto, Pushto
8083
Tigrinya
Tonga
Byelorussian
6669
Irish
7165
Persian
7065
Tu r kish
8482
Cambodian
7577
Italian
7384
Polish
8076
Tu r kmen
8475
Catalan
6765
Japanese
7465
Por tuguese
8084
Twi
8487
Chinese
9072
Javanese
7487
Quechua
8185
Ukrainian
8575
Corsican
6779
Kannada
7578
Rhaeto-Romance
8277
Urdu
8582
Croatian
7282
Kashmiri
7583
Rumanian
8279
Uzbek
8590
Czech
6783
Kazakh
7575
Russian
8285
Vietnamese
8673
Danish
6865
Kirghiz
7589
Samoan
8377
Volapuk
8679
Dutch
7876
Korean
7579
Sanskrit
8365
Welsh
6789
English
Esperanto
6978
Kurdish
7585
Scots Gaelic
7168
Wolof
8779
6979
Laothian
7679
Serbian
8382
Xhosa
8872
Estonian
6984
Latin
7665
Serbo-Croatian
8372
Yiddish
7473
Faroese
7079
Latvian, Lettish
7686
Shona
8378
Yoruba
8979
Sindhi
8368
Zulu
9085
8373
8471
8479
Country Codes
Choose
a
country code from this list.
Country
Afghanistan
Argentina
32
Code
Code
Code
ET
Country
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
AR
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
Pa raguay
PY
Ukraine
UA
Czech
CZ
JP
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Por tugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Republic
AF
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
Country
Code
Country
Ethiopia
Fiji
SG
SK
UG
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
Correction
Cause
Symptom
No power.
?
The power is on, but
the DVD/CD Receiver
?
The power cord is disconnected.
?
the power cord
wall outlet.
No disc is inserted.
?
Insert
Plug
?
picture.
The TV is not set to receive DVD
signal
?
a
(Check
lit.)
Select the
mode
output.
disc.
into the
securely
that the DVD or,
audio CD indicator in the DVD display
is
does not work.
No
service.
the TV
on
video
appropriate
so
the
input
picture from
the DVD/CD Receiver appears
TV screen.
?
The video cable is not connected
?
no
sound
or
?
The connected TV power is turned off.
?T
?
The
?
very low-level
sound is heard.
only
equipment
connected with the
not connected
are
?
playback picture
is
the TV.
Select the correct
input
mode of the
so
Connect the audio cable into the
jacks securely.
securely.
The power of the equipment connected
with the audio cable is turned off.
?T
?
The audio
?
Replace
?
The disc is
?
Clean the disc.
?
No disc is inserted.
?
Insert
?
jacks
you can hear the
sound from the DVD/CD Receiver.
signal output.
The audio cables
urn on
audio receiver
audio cable is not set to receive DVD
a
?
The
Connect the video cable into the
securely.
securely.
There is
the
on
connecting
cable is
damaged.
dirty.
urn on
the
equipment
connected
with the audio cable.
it with
new one.
poor.
The DVD/CD Receiver
does not start
a
disc.
(Check
that the
DVD,
audio CD indicator in the DVD
playback.
is
?
An
disc is inserted.
unplayable
?
or
display
lit.)
Insert
a
(Check the
system and Regional
playable
type, colour
disc.
disc
code.)
?
The disc is
placed upside
down.
?
Place the disc with the
playback
side
down.
?
The disc is not
placed
within the
guide.
?
Place the disc
correctly
?
The disc is
?Amenu
is
dirty.
on
the TV
screen.
The
Rating
level is set.
heard.
or
noise is
The disc is
?
The
?
The DVD/CD Receiver is located too
dirty.
and
speakers
components
connected poorly.
close to the TV.
are
guide.
?
Press the SET UP button to turn off
?
?
inside the
tray
Clean the disc.
menu screen.
Cancel the
the
Loud hum
the disc
?
the
?
on
rating
Rating
function
Clean the disc.
?
Connect the
speakers
components securely.
ove
change
level.
?
?M
or
and
your TV away from the audio
components.
33
Cause
Symptom
Radio stations cannot
?
The antenna is
Correction
positioned
or
connected
poorly.
be tuned in.
?
Connect the antenna
?
Adjust
securely.
the antennas and connect
an
external antenna if necessary.
?
The
signal strength of the stations is
weak (when tuning in with automatic
tuning).
?
No stations have been
preset
or
too
preset
?T
?
une
in the station
Preset the stations
manually.
(page 30).
stations have been cleared
(when
tuning by scanning preset stations).
The remote control
?
remote
does not work
properly.
The remote control is not
?
sensor
pointed
at the
?P oint the remote control at the remote
of the DVD/CD Receiver.
The remote control is too far from the
sensor
?
DVD/CD Receiver.
?
There is
an
Use the remote control within about 20
ft
obstacle in the
path
of the
of the DVD/CD Receiver.
(6 m).
?
Remove the obstacle.
are
?
Replace
panel
?
Press DIMMER
remote control and the DVD/CD
Receiver.
?
The batteries in the remote control
flat.
The front
display
34
panel
is too dim.
?
Nothing
display.
is
displayed
on
the front
the batteries with
on
new ones.
the remote control.
Specifications
Power
Power
Refer to main label
supply
consumption
Refer to main label
Mass
Genral
External dimensions
CD/ VD
Tuner
AM
[MW]
H
x
D)
x
75
x
314
Laser
Semiconductor
Signal system
Frequency response (audio)
Signal-to-noise ratio (audio)
Dynamic range (audio)
Harmonic distortion (audio)
PAL
mm
5°C to
status: Horizontal
35°C, Operation
5% to 85%
laser, wavelength
650
nm
625/50, NTSC 525/60
200 Hz to 18 kHz
More than 70 dB
(1 kHz, NOP,
20 kHz
LPF/A-Filter)
More than 70 dB
(1 kHz, at 12W position) (20 kHz LPF/A-Filter)
1.0 V (p-p), 75 Ω, negative sync., RCA jack
(Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x
(C) 0.3 V (p-p), 75 Ω
1.0 %
output
output
87.5
Tuning Range
Intermediate Frequency
Signal-to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
-
108.0 MHz
or
65.0
-
74.0
MHz,
87.5
1
108.0 MHz
-
10.7 MHz
55 dB
180
522
-
-
(Mono)
10,000 Hz
1,611 kHz
or
530
-
1,610 kHz
450 kHz
Stereo mode
25W+25W(6Ωat1kHz,THD10%)
Front: 25W + 25W (THD 10 %)
Surround mode
Amplifer
360
Temperature:
S-video
FM
x
kg
Operating conditions
Operating humidity
Video
Video
(W
3.8
(* Depending on the sound mode
settings and the source, there may
be no sound output.)
Centre*: 25W
Outputs
S-VIDEO
Surround*: 25W
+
Subwoofer*: 60W
25W
(8Ω
(6Ω
at 70
at 1
kHz, THD
Hz, THD
10
10
%)
%)
MONITOR
Satellite
Speakrs
Suplied Acesori
Designs
1
Type
Impedance
Frequency Response
130
-
1
Way
H
x
D)
Speaker
(1m)
50
-
1,500 Hz
82 dB/W
(1m)
25W
60W
50W
120W
89x89x90mm
170x350x333mm
0.4
?Speakers......................6
1
8Ω
20,000 Hz
85 dB/W
Rated
x
1
Passive Subwoofer
6Ω
Sound Pressure Level
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
Way
Speaker
Speaker
kg
4.3
kg
?Remotecontrol.................1
?Speakercables.....................5
?Batteries(AAA).....................2
?AMloopantenna................1
?FMantenna.......................1
and
specifications
are
subject
to
change
without notice.
35
P/N: 3834RH0057Z