LG | RC8055EH2M | LG RC8055EH2M Owner’s Manual

Please read this manual carefully before operating
your dryer and retain it for future reference.
Ultra Big Capacity Drum
The ultra big capacity drum on this LG dryer allows you to
dry more washing at once, saving time!
Lower Energy Consumption
LG Heat Pump dryers use less energy than conventional dryers due
to an optimized heat exchanger and Auto CleaningTM technology.
This LG Heat Pump dryer has been designed to save you money.
Reduced Noise Levels
We have reduced the operating noise of this LG dryer by using
innovative sound-absorbing and noise-screening technologies,
making it much quieter than conventional dryers.
Ease of Use
The wide, electronically controlled LED display on this machine
is very easy to use. Simply select the cycle you require
and your LG dryer will do the rest. Smart Diagnosis™ is available.
Safety Instructions ...............3
Technical Data ....................29
Installation Instructions ........6
Warranty ...............................30
Appearance & Design .........10
Operating Your Dryer ..........11
Additional Functions...........17
Caring for Your Dryer..........19
Additional Tips for
Smart Use.............................21
Troubleshooting Guide .......26
Safety Instructions
For your safety, the information in this manual must be followed to minimise the risk of fire or
explosion, electric shock, or to prevent property damage, injury to persons or death.
• Serious injury or death may occur when not observing the following rules.
• It is strictly forbidden to use the product for anything other than the manufacturer
authorized usage. LG doesn't take full responsibility for the damage by inaccurate and
improper usages.
• Do not repair or replace any part of the dryer or attempt any servicing unless specifically
recommended in the user-maintenance instructions or published user-repair instructions
that you understand and have the skills to carry out.
• This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure that they do not play
with the appliance.
For use in Europe:
• This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
• Children of less than 3 years should be kept away unless
continuously supervised.
• Before plugging in the power cord, make sure the cord is earthed and connected to a circuit
No earthing may cause breakdowns or an electric shock.
• Do not plug into an adaptor. Do not use with an extension lead.
Abnormal heating of outlet may cause a fire.
• Do not remove the top plate when installing the dryer.
• Do not modify this product.
May cause breakdown, fire or electric shock.
• Keep the dryer away from cookers, naked flames, or any other inflammable objects.
May cause fire or parts to melt.
• Do not use a damaged power cord or place heavy objects on the cord.
A damaged power cord may cause fire or electric shock.
Safety Instructions
• Do not touch the plug or switch with wet hands.
May cause an electric shock.
• Do not disconnect the power by grasping the cord, not the plug.
May cause damage of cord resulting in fire or electric shock.
• Wipe dirt and stains from the power cord and insert the plug firmly into the socket.
Dirt and poor connections may cause fire.
• Do not use if power cord, plug or socket is damaged.
May cause fire or electric shock.
• Do not install or store the dryer where it will be exposed to the weather.
May cause fire, electric shock or malfunction.
• Do not use an extension cord or an adaptor to connect to the power.
May cause fire or electric shock.
• Do not splash water on to the dryer.
May cause fire or electric shock.
• Unplug the power cord when cleaning or not using the dryer.
Water or dirt may cause an electric shock.
• Do not allow children or pets to play on or inside the dryer.
Children and pets may injure or suffocate themselves.
• Keep pets away from the dryer.
Pets may damage the dryer, or may receive an electric shock.
• Do not press buttons using sharp implements such as knives and screwdrivers.
May damage the dryer or cause electric shock.
• Do not dry articles that have been cleaned in, washed in, soaked in, or spotted with combustible
or explosive substances (such as wax, oil, paint, gasoline, degreasers, dry-cleaning solvents,
kerosene, etc.).
May cause fire or explosion.
• Do not place flammable items near the dryer.
May cause toxic gases, parts damage, fire or explosion.
• Before the appliance is removed from service or discarded, unplug the appliance then
disassemble the door and cut off the power cord to prevent misuse.
May cause accident and injury.
• The packaging is not a toy. Destroy after opening.
To avoid the possibility of suffocation, keep the packaging away from babies and children.
• If this appliance is supplied with power from a cord extension set or an electrical connector, the
portable outlet device must be positioned so that it is not subject to damp or splashing.
It may cause an electric shock, a fire, malfunction or deformation.
• Items that have been spotted or soaked with vegetable or cooking oil constitute as a fire hazard
and should not be placed in the tumble dryer.
Items that have been soiled with substances such as cooking oil,
acetone, alcohol, petrol, kerosene, spot removers, turpentine, waxes and
wax removers should be washed in hot water with an extra amount of
detergent before being dried in the tumble dryer.
May cause spontaneous combustion leading to explosion and fire.
• Items made of foam, rubber, plastic, or other heat-sensitive fabrics (such as bathroom rugs,
nonslip mats or raincoats) should not be dried in a tumble dryer on a heat setting.
Safety Instructions
Items such as foam rubber (latex foam), shower caps, waterproof
textiles, rubber backed articles and clothes or pillows fitted with foam
rubber pads should not be dried in the tumble dryer.
May cause spontaneous combustion leading to explosion and fire.
• Plastic articles such as shower caps or waterproof nappy covers should not be placed in the
tumble dryer.
May cause spontaneous combustion leading to explosion and fire.
• If the tumble dryer is installed on a carpet, it may be damaged due to poor air ventilation.
May cause spontaneous combustion leading to explosion and fire.
• Fabric
softeners, or similar products, should be used as specified by the
fabric softener instructions.
• The tumble dryer is not to be used if industrial chemicals have been used
for cleaning.
• Remove all objects from pockets such as lighters and matches.
• Fabric softeners, or similar products, should be used as specified by the fabric softener
• To reduce the risk of personal injury, adhere to all industry recommended safety procedures
including the use of long sleeved gloves and safety glasses. Failure to follow all of the safety
warnings in this manual could result in property damage, personal injury or death.
• If
the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
• The appliance must not be installed behind a lockable door, a sliding
door or a door with a hinge on the opposite side to that of the tumble
dryer, in such a way that a full opening of the tumble dryer door is
• Do not dry unwashed items in the tumble dryer.
• Never stop a tumble dryer before the end of the drying cycle unless all
items are quickly removed and spread out so that the heat is dissipated.
• The lint trap has to be cleaned frequently, if applicable.
• Lint must not to be allowed to accumulate around the tumble dryer.
• Filter must be cleaned after every cycles are completes.
Installation Instructions
The following instructions will guide you through the initial steps of setting up your dryer.
Please note that every section of this manual provides important information regarding the
preparation and use of your dryer, and it is important that you review this entire manual
before proceeding with any installation or use. Be sure to observe all listed warnings and
cautions. These installation instructions are intended for use by qualified installers. Read
these installation instructions completely and carefully.
Safety Information
Risk of Injury
The dryer is very heavy so you shouldn’t
try to lift it alone.
Do not lift the dryer by grasping any of the
protruding parts, e.g. the jog dial or the
door, they may break off.
Risk of Falling or Tripping Up
Ensure there are no loose hoses or
Check the dryer for damage that has
occurred during transportation.
Do not connect the dryer if it has visible
signs of damage.
If you are not confident, contact your local
LG agent. Always empty the dryer
completely before transporting it.
Your dryer should not be located near to a
gas hob, cooker, heater or grill, as flames
from the burners could damage your dryer.
When the dryer is fitted beneath a work
surface, allow 30cm~50cm space at either
side of the dryer and at the back of the dryer
to allow air to exit the rear grille. This air
flow is critical for condensation of water
during the drying process.
If you use this dryer near or stacked on top
of your washing machine, separate main
plugs and sockets must be used for each
appliance. Do not use 2-way adaptor or
extension lead.
You can stack the dryer on top of your
washing machine to save space. A stacking
kit is available from your local appliance
■ Stacking Installation Instructions
Your LG dryer can be placed on top of a front loading washing machine and securely fixed
with a stacking kit (see following page for instructions). This installation must be conducted
by an experienced installer to ensure it has been installed correctly.
An installer will ensure you have the correct stacking kit for your model of washing
machine and will ensure it is firmly fixed. For these reasons, expert fitting is essential.
CAUTION Concerning the power cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance and has no additional outlets or branch
circuits. Check the specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulations are
dangerous. Any of these could result in and electric shock or fire. Periodically examine
the cord of your appliance, and if its appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorised servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, trapped in a door, or walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
Installation Instructions
Stacking Kit
In order to stack this dryer an LG stacking
kit is required.
This dryer may only be stacked on top of an
LG washer. DO NOT attempt to stack this
dryer on any other washer, as damage,
injury or property damage could result.
• Incorrect installation can cause serious
• The weight of the dryer and the height
of installation makes the stacking
procedure too risky for one person.
This procedure should be performed by
2 or more experienced service
• The dryer is not suitable for a built-in
installation. Please do not install as a
built-in appliance.
• Do not operate if the dryer is
3. Align the stacking kit holes and the rear
cover holes.
3-1) 23.6 inch(600mm)
Washer Top plate size
21.7 inch
23.6 inch
Installation Procedure
1. Place the LG dryer on the LG washing
2. Remove the two screws from the bottom
of the rear cover on each side as
illustrated below.
3-2) 21.7 inch(550mm)
• Fasten the 2 screws that were removed
earlier from dryer to stacking kit.
• Use 4 screws in accessory box
[0.6inch(16mm)] to assemble washer rear
cover and stacking kit.
• The procedure for the opposite side will be
the same.
Installation Instructions
Earthing Instructions
This appliance must be earthed. In the
event of malfunction or breakdown, earthing
will reduce the risk of electric shock by
providing a path of least resistance for the
electric current.
This appliance is equipped with an earthed
cord and an earthing plug. The plug must be
plugged into an appropriate outlet that is
properly installed and earthed in
accordance with local standards.
Additional Grounding Procedure
Some countries may require a separate
ground. In such cases, the required
accessory ground wire, clamp and screw
must be purchased separately.
- For better drying performance,
please keep the rear of product
away from wall.
- Do not install the dryer where there
is a risk of frost or dust.
• The tumbles dryer may not be able
to operate properly or may be
damaged by freezing of condensed
water in the pump and drain hose.
Condensed Water Drain
This appliance can be plumbed directly into
the mains waste with the adaptor supplied.
Condensed water will drain away. A
plumber will be required.
The dryer should not be installed next to
a refrigeration appliance.
Do not install the Heat Pump dryer
next to a high-temperature appliance
such as a refrigerator, oven or stove
etc. which can affect poor drying
performance and programme
duration, and adversely affect the
proper functioning of the compressor.
The Heat Pump dryer performs best
at a room temperature of 23°C
Avoid installing the product around a
heat source.
The rear side of the dryer must be well
If not, this may cause problems.
Installation Instructions
■ Level the Dryer
1. Levelling the dryer prevents unnecessary
noise and vibration. Place your dryer on a
solid, level floor.
Place the dryer in an area free from
flammable materials, condensation and
not liable to freezing.
2. If the dryer is not properly level, adjust
the front levelling feet as necessary.
Turn them clockwise to raise and
counter-clockwise to lower until the dryer
no longer wobbles, both front-to-back,
side-to-side and corner-to-corner.
Adjustable Feet
Dryer is raised
Dryer is lowered
Diagonal Check
When pushing down the edges of the
machine, the machine should not move up
and down at all (Please check both
If the machine rocks when pushing the
machine top plate diagonally, adjust the feet
Appearance & Design
■ Product Layout
- RC8055*H*M
Air Ventilation
■ Control Panel
Smart Diagnosis™ function is
available only for the products
with a Smart Diagnosis™ mark.
• Time Delay
• Anti Crease
• Favorite
• Buzzer
• Spin Speed
• Option
• Dry Level
(*Child Lock)
• Drum Light
Operating Your Dryer
■ Cycle Selection Table
Sensor Dry Cycle
Laundry Type
Towels, dressing gowns and
bed linen
For thick and quilted fabrics
Terry towels, tea towels,
towels and bed linen
For thick and quilted fabrics that
do not need to be ironed
Bath towels, tea towels,
underwear and cotton socks
For fabrics that do not need to be
Sheets, pillowcase and
For fabrics that do not need to be
For fabrics that need to be ironed
For thick and quilted fabrics that
do not need to be ironed
Shirts and blouses
For fabrics that do not need to be
Trousers, dresses, skirts and
For fabrics that need to be ironed
Shirts, T-shirts, trousers,
under-wear and socks
For polyamide, acrylic, and
polyester that do not need to be
Shirts, T-shirts, under-wear,
anoraks and socks
For polyamide, acrylic, polyester
that do need to be ironed
Bed linen, table linen, towels,
T-shirts, polo shirts and work
Bed linen, table linen,
tracksuits, anoraks and
Operating Your Dryer
Sensor Dry Cycle
Laundry Type
Bulky Item Bed clothes, sheets
For bulky items
For jeans which do not need to be
pillowcase, and
Skin Care T-shirts,
For cotton fabrics which do not
need to be ironed
Shirts and blouses
to the Note)
Odour removal of fabric
(For fabrics in need of odour
For polyester material
Jeans and colour fading
Soccer kit and training wear
Linen and towels, excluding
For small loads of suitable fabrics
Quick Dry fabrics applied to delicate,
sports wear, bulky Item cycle. with short drying times
Silk, fine fabrics and lingerie
For fabrics that are heat-sensitive
like synthetic fabrics
For wool fabrics
Timed Drying Cycle
Gentle Air Delicate Clothes
Refresh clothes with gentle drying
Cool Air
All fabrics that need
Tumbles without heat
Warm Air
Bath towels, bath robes,
dishcloth and quilted fabrics
made of acrylic
Small Items & damp clothing
Everyday items suitable for heat
When using the “Refresh” course, please spray cold or warm water on the fabric
for a fresher result. (The recommend amount is 20cc of water per shirt.)
If the load is less than 1kg, please use the “Warm Air” Cycle in Timed Drying Cycle.
Wool items should be dried using the “Wool” Cycle and heat-sensitive fabrics including
silk, underwear and lingerie should be dried using the “Delicate” Cycle. Please comply
with the recommended laundry load when you select your desired cycle - found on
page (21,22). Otherwise, your clothes may be damaged.
Operating Your Dryer
■ Please read before using your LG dryer for the first time
After removing the packaging, please carry out the following checks to ensure the LG
dryer is correctly installed and ready for use. (See installation instructions.)
1. Check the dryer is well balanced by using a spirit level. If not, adjust the feet of the LG
dryer until the machine is balanced.
2. Check the water container, filter, control panel and drum to make sure everything is in
3. Set the machine to dry for 5 minutes to warm up the drum.
4. Open the door between loads the first few times you use the machine to allow any
odours from the interior of the LG dryer to disperse.
The final part of a tumble dryer cycle occurs without heat (cool down cycle) so
that the items are left at a temperature to ensure that the items will not be
Turn the
power on.
1. Turn the power on.
First, press the ‘‘Power’’ button. The
indicator light above the button will
become illuminated indicating that the
machine is all set to run.
2. Open the door.
3. Check the filter and water container
are clean.
The filter is inside the door rim or in the
back of the door. It needs to be cleaned
before and after drying.
Open the door and check the filter is
clean. If not, please clean it referring to
page 19. Also check if the water
container need to be emptied for optimum
drying results.
4. Place laundry into the drum after
The clothes should be sorted by fabric
type and dryness level and all the strings
and belts of clothes should be well tied
and fixed before being put into the drum.
Push the laundry to the back to keep it
away from the door seal.
If not, the door seal and clothes may be
Open the
Glass Door Opaque Door
Check the
Operating Your Dryer
5. Close the door.
Before you close the door, make sure
fabrics are placed well inside and that
foreign objects, especially flammable
ones, are not caught around door.
Be careful not to trap laundry between
the door and rubber seal.
Glass Door Opaque Door
6. Select the drying cycle you want.
You can choose a cycle by turning the
cycle selector knob until the required
cycle is indicated.
If you press Start/Pause button without
choosing a cycle, the dryer will proceed
with the Cupboard cycle. Please refer to
Cycle Selection table (page 11,12) for
detailed information.
Select the
7. Press the start button.
You will hear drum rotating.
Take out
the laundry.
8. After the cycle has finished, open the
door and remove the laundry.
Be careful! The drum inside could still be
(Operation time varies depending on your
cycle selection or options.)
Operating Your Dryer
The final part of a tumble dryer cycle
occurs without heat (cool down
cycle) to ensure that the items are left
at a temperature that will not
damage them.
Clean the
(Replace the
filter if it is
9. Clean the filter and empty water
The filter should be cleaned after each
10. Turn off the dryer.
Press the ‘‘Power’’ button.
- Take care if using a vacuum cleaner to
clean the filter, as it is easily damaged
and torn. If there is a residue build up
on the filter, scrub the filter with a brush
to remove.
- If you want to open the door while the
dryer is operating, please press the
Start/Pause button first, wait until the
drum completely stops and then open
the door.
It must not be used for purposes other
than those for which it was designed.
Operating Your Dryer
■ Rack Dry
( depending on the model )
The dryer rack is placed inside the dryer as
seen in the picture below. Remove and
discard packing material before use.
The Rack Dry is designed for use with items
that must be dried flat, without tumbling,
including sweaters and delicate fabrics.
To use the Rack Dry :
1. Open the door.
Check the filter and remove any lint
accumulated from items dried on the
1. Insert wire
edge to the
2. Do not remove the filter.
3. Place drying rack over the bottom of
the dryer door opening.
Reset the rack on the dryer back
Push down on the frame front to
secure over filter.
4. Place wet items on top of the rack.
Allow space around items for air to
The rack does not move, but the drum
will rotate.
5. Close the door.
6. Turn power on and select Rack Dry.
2. Place
fabrics or
Additional Functions
• Press the Power button to turn power on
and off.
• To cancel the Time Delay function, the
power button should be pressed.
Cycle Selector
• Cycles are available according to the
laundry type.
• The lamp will light up to indicate selected
programme buttons
Additional Programme
• Use these buttons to select the desired
options for the selected cycle.
• This allows you to select additional options
and will light up when selected.
• This Start/Pause button is used to start the
dry cycle or pause the dry cycle.
• To stop the cycle temporarily, press the
Start/Pause button.
• When in Pause, the power is turned off
automatically after 4 minutes.
Additional Functions
■ Time Delay
■ Option
You can use the Time Delay option to
delay the finishing time of drying cycle.
Maximum Time Delay is 19 hours.
Minimum Time Delay is 3 hours.
1. Turn the dryer on.
2. Select a cycle.
3. Set time delay hour(s) by pressing the
“ ”, “ ” button.
4. Press Start/Pause button.
Hand Iron
This function retains a higher level of moisture
in garments than the standard Iron dry level.
■ Anti-Crease
The Anti Crease option prevents creases
that are formed when the laundry is not
unloaded promptly at the end of the drying
cycle. When Anti Crease is selected, the
dryer repeatedly runs and pauses, giving
you 2 hours to unload the laundry. If the
door is opened during the Anti Crease
option, the option is cancelled.
■ Favorite
Favorite option allows you to store a
customised dry cycle for future use.
1. Turn the dryer on.
2. Select a cycle.
3. Select the option or additional programme.
(Anti-Crease, Spin speed etc.)
4. Press and hold Favorite option button for 3
The Favorite option is now stored for future
use. To reuse the stored cycle, select
Favorite option and press the Start/Pause.
■ Drum Light
Whilst the dryer is running it is possible to
see inside the drum if you select the Drum
Light function.
- Light on : Door is opened.
- Light off : Door is closed. Off automatically.
■ Spin speed
This additional program is able to control
drying time, allowing you to select high or
normal. (Default option is normal)
- High : When washing dehydration proceeds
from more than 1,200 rpm.
- Normal : When washing dehydration
proceeds from less than 1,000 rpm.
Spin RPM is based on the LG Washing
Mixed Fabric
Easy Care
Dry Level
Hand Iron is
Damp Dry Beep
This function lets you know when the clothes
are ready for ironing, with a beeping sound.
Mixed Fabric
Easy Care
Dry Level
Extra / Very
Cupboard / Light
Very / Cupboard
■ Child Lock (
Damp Dry
Beep is
For the safety of children, press Dry Level
button for about 3 seconds.
You will see “
” indication on the LED.
You can see “
” sign on LED window.
- All controls except Child Lock and Power
buttons will be disabled.
- Child Lock continues after the end of cycle.
To turn the Child Lock off, press Dry
Level button for about 3 seconds.
■ Buzzer
This is an option to enable you to adjust
volume of beeper sound.
Caring for Your Dryer
Caring for your Dryer is Very Important
It’s not difficult to care for your dryer, but it is
important that you do care for it, to get the best
out of it.
Clean Filter
Clean the filter after each use and check it
before each use. It should also be cleaned if the
‘‘Clean Filter’’ light becomes illuminated and the
buzzer sounds whilst the dryer is in operation.
Cleaning or emptying the filter will reduce drying
times and energy consumption and lengthen the
dryer life.
Empty Water Container
Condensed water is collected in the water
Empty the water container after every use.
Not doing so will affect the drying performance.
If the water container is full, the “Empty Water”
lamp glows and the buzzer sounds while the
dryer is operating. If this should occur, the water
container needs to be emptied within the next
1. Pull out the water
1. Open the door.
2. Pull the filter out.
3. Clean the filter by
using a vacuum
cleaner or rinsing
under the tap.
4. Replace the filter.
Push the filter all
the way down to
avoid interference
with the door.
5. Close the door.
- After washing the filter, please dry
- Lint must not be left to accumulate
in the dryer.
If the filter is not in your dryer, you
can not operate the dryer.
2. Empty water
container in the
3. Push it back into
the dryer.
4. Press the
A high atmospheric temperature and
a small room may both increase
drying time as well as energy
Do not drink the condensed water.
If the laundry is not spun at a high speed
during washing, energy consumption
and drying time will increase.
In some instances, LED window may
display “
” (Empty water symbol) and
the dryer may stop because the water
container is full.
If “Clean Filter” symbol is displayed during the operation, clean the filter promptly.
1.Cool the dryer down and follow the above steps.
2.Press the Start/Pause button.
Caring for Your Dryer
■ Ventilation Grill and Cool Air
Inlet Grill
3. Connect
drain hose
to the kit.
Vacuum the front ventilation grill 3-4 times a
year to make sure there is no build up of lint
or dirt that may cause improper air flow.
■ Moisture Sensor
- Warm air is exhausted through the
ventilation grill.
- Adequate ventilation should be
provided to avoid the back flow of
gases into the room from units
burning other fuels, such as open
■ Condensed Water Drain-out
Normally, condensed water is pumped up to
the water container where water is collected
until manually emptied. Water can also be
drained out directly to a mains drain,
especially when the dryer is stacked on top
of a washing machine.
With a connecting kit for the mains drain
hose, simply change the water path and
re-route to the drainage facility as below:
1. Take
kit out.
2. Separate
hose from
the kit.
The device senses the moisture level of the
laundry during operation, which means it
must be cleaned regularly to remove any
build-up of lime scale on the surface of the
Wipe the sensors inside drum.
(as illustrated)
Additional Tips for Smart Use
■ Drying Guide
Capacity of
Easy Care
Display Drying Time
(Including Cooling Time)
8 kg
180 min
170 min
8 kg
170 min
160 min
8 kg
8 kg
160 min
150 min
150 min
140 min
8 kg
140 min
130 min
4 kg
80 min
70 min
4 kg
70 min
60 min
4 kg
60 min
40 min
4 kg
70 min
40 min
4 kg
60 min
Bulky Item
30 min
2 kg
120 min
3 kg
110 min
Skin Care
4.5 kg
210 min
1.5 kg
39 min
Sports Wear
2 kg
50 min
Quick Dry
3 kg
50 min
1.5 kg
48 min
1 kg
29 min
Additional Tips for Smart Use
Dry woollens on “wool’’ cycle. Be sure to
follow fabric care label symbols first. Wool
may not be completely dried from the cycle,
so don't repeat drying. Pull woollens to their
original shape and dry them flat.
Woven and Loopknit Materials
Some woven and loopknit materials may
shrink, depending on quality.
Permanent Press and Synthetics
Do not overload your dryer. Take out
permanent press items as soon as the dryer
stops to reduce creases.
Baby Clothes and Night Gowns
Always check the manufacturer’s
Below are fabric care labels.
Tumble dry
Permanent Press /
Crease resistant
Gentle / Delicate
Do not tumble dry
Do not dry
High heating
Medium heating
Low heating
Rubber and Plastics
Do not dry any items made from or
containing rubber or plastics such as:
a) Aprons, Bibs and Chair Covers
b) Curtains and Table Cloths
c) Bathmats
No heat / air
Do not dry fibreglass articles in your dryer.
Glass particles left in the dryer could be
picked up by your clothes the next time you
use the dryer and irritate your skin.
In the shade
Fabric Care Labels
Clothes have their own wash care labels, so
drying according to the wash care label is
Not only that, the laundry must be sorted
according to size and type of fabric.
For the best drying performance and most
efficient energy usage, do not overload the
Line Dry / hang to dry
Drip dry
Dry flat
Additional Tips for Smart Use
■ Product Specification
Rated Capacity
Dryer Type
Energy Efficiency Class
Annual Energy Consumption (AEc )
Automatic Tumble Dryer
EU Ecolabel Award
Power Consumption at Full Load
-. Off-mode (Po )
-. Left-on mode (PI )
Duration of Left-on mode
Standard Cotton Program
Drying Time (Tt )
-. Tdry
-. Tdry1/2
Condensation Efficiency Class
-. Ct
-. Cdry
-. Cdry1/2
Sound Power Level
LG Electronics
Condenser Household Tumble Dryer
Cotton Cupboard Normal
Additional Tips for Smart Use
Estimated Performance
Dry Level
Load Content
Cotton /
Cotton 100%
Cotton 100%
Mixed Fabric
/ Cupboard
Polyester 65%+
Polyester 65%+
Easy Care /
Capacity Energy Drying
Efficiency Time
(PI)(W) (Po)(W)
• Tested in accordance with EN61121 and Directive 932/2012
• Set programme at "Cotton Cupboard Normal (Full & Half Load)" for test in accordance
in conformity with EN61121 and Directive 932/2012
- Standard Cotton programme : Cotton
+ Cupboard + Normal Option (Default)
(This is the most efficient programme in terms of the test conditions proposed by
EN61121 and Directive 932/2012)
• Information about the ‘standard cotton programme’ specifies that it is suitable to dry
normal wet cotton laundry and that it is the most efficient programme in terms of
energy consumption for drying wet cotton laundry.
• The test results depend on room temperature, type and amount of load, water
hardness and water inlet temperature.
• If product is installed as built under, it may cause performance degradation.
Additional Tips for Smart Use
■ Spare Parts
■ Accessory Parts
Spare parts that are required under the
terms of warranty are provided free of
charge. If the warranty has expired then
spare parts must be purchased from the
service centre.
• Accessories available for this product
( depending on the model )
1. Condensing Drain Hose and Hose
Holder (Purchased Separately)
■ Disposal of the Dryer
It is requested that you dispose of your
dryer safely to protect children and others
from possible injury.
The door, lid and other protruding parts
must be removed and the power cord
should be cut off before safe disposal.
2. Dryer Rack ( Purchased Separately )
■ Service Contact
If there is a problem with your dryer, first
consult the Trouble Shooting Guide. If you
cannot find the error and you are unable to
resolve the problem, please contact the
Service Centre.
3. Stacking Kit ( Purchased Separately )
A Customer Service representative will ask
you the following questions:
1. Name, address and postcode
2. Phone number
3. Description of problem
4. Model number and serial number of your
5. Date of Purchase
Holder : 2EA, Screw : 4EA
• The stacking kit can be used for washer
top plate size 550mm and 600mm for
If stacking is needed, you must stack
the dryer upon an LG washing
A stacking kit is sold separately.
Troubleshooting Guide
■ Troubleshooting Tips
To save you time and money, the following page will help answer your questions before
service call.
What to do
Dryer won’t run
1. Check dryer is plugged in.
2. Check "Start/Pause" button is pressed.
3. Check door is properly closed.
4. Check room temperature is not below 5°C.
5. Check a fuse is blown or the circuit breaker is tripped
and replace them. (Caution : electric dryers generally
use two fuses or breakers) After emptying the water
container and cleaning filter during operation, you
must press the Start/Pause button, then the dryer will
operate again.
It takes a long time to dry
1. Filter should be cleaned after each load.
2. Check water container is emptied.
3. Select correct cycle setting for fabric type.
4. Check air ventilation grill or rear vents of dryer are not
5. Check clothes are not excessively wet.
6. Check the dryer is not overloaded.
Dryer is operating but
“Time Left” in the display
doesn’t change.
This is not a malfunction.
Drying time is estimated and will recalculate throughout
the cycle as it senses the dryness of the load.
Check filter is clean.
Clothes are covered in fluff 1. Check the filter is clean.
2. Check all the items in the dryer are clean.
3. Check all the laundry has been correctly sorted by
fabric type.
4. Check the dryer is not overloaded.
5. Check if there are any paper, tissues or other
degradable items amongst the laundry and remove.
The drying time is
not consistent
The drying time for a load will vary depending on the
heat setting, the size of the load, the type of fabrics, the
wetness of the clothes and the condition of the filter.
Water is leaking
Check the water hose or drain hose is properly
The clothes are creased
Check the dryer is not overloaded. Try a shorter drying
time and remove items whilst they still retain a slight
amount of moisture. Use the anti-crease option.
The garments have shrunk
To avoid shrinkage, please follow the care and use
instructions for your garment, as some fabrics shrink
naturally when washed and should not be placed in a dryer.
Please check the filter is in the dryer.
Troubleshooting Guide
■ Error Mode
: The door must be closed and the Start/Pause button must be pressed for reoperation. If error message continues to occur, unplug the power cord and
call the service centre for advice.
: If error message continues to occur, unplug the power cord and call the service
centre for advice.
■ Drum light does not work
• Contact the customer service centre.
Troubleshooting Guide
Smart Diagnosis™ function is
available only for the products with a
Smart Diagnosis™ mark. Should you
have an analog phone, the Smart
Diagnosis™ function may not
■ Using Smart Diagnosis™
• Only use this feature when instructed to do
so by the call centre. The transmission
sounds similar to a fax machine, and so
has no meaning except to the call centre.
• Smart Diagnosis™ cannot be activated if
the dryer does not power up. If this
happens, then troubleshooting must be
done without Smart Diagnosis™.
If you experience problems with your dryer,
call the customer information centre. Follow
the call centre agent's instructions, and do
the following steps when requested:
1. Press the Power button to turn on the
dryer. Do not press any other buttons or
turn the cycle selector knob.
Max. 10 mm
3. Press and hold the “ (More)” button for
three seconds, while holding the
mouthpiece of your phone close to the
"Smart Diagnosis™" icon and Power
4. Keep the phone in place until the tone
transmission has finished.
The display will count down the time.
• For best results, do not move the phone
while the tones are being transmitted.
• If the call centre agent is not able to get
an accurate recording of the data, you
may be asked to try again.
5. Once the countdown is over and the tones
have stopped, resume your conversation
with the call centre agent, who will then be
able to assist you using the information
transmitted for analysis during your call to
customer information centre.
2. When instructed to do so by the call
centre, place the mouthpiece of your
phone close to the "Smart Diagnosis™"
icon and Power
“Smart Diagnosis is a troubleshooting
feature designed to assist, not replace,
the traditional method of troubleshooting
through service calls. The effectiveness
of this feature depends upon various
factors, including, but not limited to, the
reception of the phone being used for
transmission, any external noise that
may be present during the transmission,
and the acoustics of the room where the
machine is located. LG does not
guarantee that Smart Diagnosis would
accurately troubleshoot any given
Technical Data
850 mm
640 mm
600 mm
■ Electrical Requirements
Net Weight : 53.2 kg, Opaque Door
54.6 kg, Glass(Cr) Door
■ Ventilation Requirement
230 V
50 Hz
Ensure you connect the dryer to the correct
electricity voltage. The ratings plate on your
dryer shows you what the voltage should
Alcove or
under counter
Ensure air flow
of 112 cu.ft./min
through dryer
Closet door must have
2 (louvered) openings,
each having a
minimum area of 60
sq. inches (387 sq.cm),
located 3 inches (8 cm)
from bottom and top of
■ Max. capacity : 8 kg
■ Allowable temperature : 5 ~ 35°C
■ Depth with door open : 1090mm
Disposal of your old appliance
1. All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
2. The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and human
3. For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal service
or the shop where you purchased the product.
• Information of fluorinated greenhouse gases used as refrigerant of
this dryer
Chemical name
Composition of Gases
Total GWP (kg CO2 –eq)
R – 134a
100% HFC – 134a
• When disposing of the appliance, cut off the mains cable, destroy the plug and
disassemble the door to prevent anything from being trapped inside.
■ What is not covered.
• Service trips to your home to instruct you on the product.
If the product is connected to any voltage other than that shown on the rating plate.
• Faults caused by accidental damage, neglect, misuse or Acts of God.
If the fault is caused by factors other than normal domestic use or use in accordance with
the owner's manual.
• Faults caused by vermin, for example rats, mice etc.
• Noise or vibration that is considered normal, for example, water drain sound, spin sound
or warning beeps.
• Correcting the installation for example, levelling the product, adjustment of drain.
• Normal maintenance recommended by the owner's manual.
• Removal of foreign objects/substances from the machine including the pump and inlet
hose filter, for example, grit, nails, bra wires and buttons, etc.
• Replacing fuses, correcting wiring or correcting plumbing.
• Correction of unauthorised repairs.
Incidental or consequential damage to personal property caused by possible defects with
this appliance.
• If this product is used for commercial purposes its warranty is invalidated.
(Example: Public places such as public bathroom, lodging house, training centre,
• If the product is installed outside the normal service area, any cost of transportation
involved in the repair of the products, or the replacement of a defective part, shall be
borne by the owner.
For U.K. Customer
CUSTOMER SERVICE Tel : +44- (0) 844 847 5454
: +44- (0) 844 847 1413
LGEUK SERVICE WEB-SITE : http://uk.lge.com
Download PDF