LG KF-29FC70RX Owner’s Manual

OPERATING MANUAL
Multiplex
72 / 55
Contents
Installation
3
Location and function of controls
Communicator / Internal generator charge
Battery installation / Front panel / Side panel
4
Basic operation
On and off / Programme selection
Volume adjustment / Quick view / Mute function
On screen language selection (option)
7
On
8
screen menus
Menu selection
up TV stations
Auto programme tuning
Manual programme tuning / Fine Tuning
Programme edit / Favorite programme
Calling the programme table
9
Setting
Picture adjustment
PSM (Picture Status Memory)
Picture adjustment / Picture format
14
Sound adjustment
SSM (Sound Status Memory) / Sound adjustment
Stereo / Dual reception (option)
NICAM reception (option) / Sound output selection
15
Other functions
TV, AV and DVD modes / Child lock
Auto sleep / LED DISPLAY adjustment
Tilt (option) / Degaussing (option) / Sleep timer
17
Time setting
Clock / On/Off Time
19
Teletext (option)
Switch on/off / SIMPLE text / TOP text
FASTEXT / Special teletext functions
20
(option)
VCR
operation
Playing tapes
23
/
control / Pause/still
Fast forward, cue, rewind and review
Clock/Count selection / Memory stop
VCR colour system setting
Tape tracking
picture
25
Recording
Manual recording / Instant timer
Timer programme setting
recording (ITR)
DVD operation
27
Notes on discs / Playing a disc / Playing MP3 discs
Selecting disc menu / Selecting title menu
Repeat playback / A-B repeat playback
Programme playback / Selecting the camera angle
3D sound / Picture size zoom / Selecting a audio language
Selecting a subtitle language / Disc menu language selection
Parental control setting / To change the password
TV Screen / Disc OSD language selection (option)
Selecting digital audio output
DRC (Dynamic Range Compression)
After
reading
keep
it in the
the
user can
easily.
2
this manual,
place where
always
contact
Connection of external
Connecting antenna /
Watching external AV
Headphone socket
Troubleshooting
equipment
Watching cable TV
source / Digital audio output setup
check list
36
39
Installation
Power
This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set.
In the event of thunderstorms
ial and mains
or
powercuts, please pull
out the aer-
plugs.
Warning
To prevent fire
moisture.
or
Do not make the
others. It may
shock hazard, do not expose the set to rain
product stand by yourself. Get
injuries.
some
help
or
from
cause
Service
Never
remove
the back
high voltage
properly, unplug it
very
cover of the set as this can expose you to
and other hazards. If the set does not operate
and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 Ω
cover.
For the best
reception
an
on
the back
outdoor aerial should be used.
Location
Position your set so that no bright light or sunlight falls directly onto
screen. Care should be taken not to expose the set to any
unnecessary vibration, moisture, dust or heat. Also ensure that the
the
set is
placed
the ventilation
in
position to allow a free flow
openings on the back cover.
a
of air. Do not
cover
Manufactured under license from Dolby Laboratories. "Dolby"
and the double-D symbol are trademarks of Dolby Laboratories.
(Multiplex 72 only)
3
Location and function of controls
All the functions can be controlled with the Communicator.
Some functions can also be adjusted with the buttons on the front
panel of the set.
Communicator
Before you use it, please select
the TVCR or DVD buttons.
TV, VCR
or
DVD function
by
press-
ing
1
2
Comunicatr
I/II
SLEEP
ARC
SYSTEM
TIMER PROG
CLK/COUNT
CLR/RST
SP/LP
REW
PLAY
FF
PAUSE
SKIP
STOP
SKIP
REC
SETUP
DISC MENU
TITLE
RETURN
AUDIO
SUBTITLE
ANGLE
3D
11
1.
I/II
selects the language during dual language broadcast.
selects the sound output (option).
2.
SLEEP
sets the
VCR BUTTONS
controls a LG video cassette recorder.
For further details, see the 'VCR Operation' section.
4.
DVD BUTTONS
controls a LG DVD player.
For further details, see the 'DVD
5.
4
i
A-B
PROGRAM
6.
M
12
65
TVCR
DVD
EJECT
13
POWER
2
3
4
5
6
7
8
9
8.
15
0
MENU
9
VOL
10
9.
TV/AV
16
PR
8
OK
VOL
17
PR
MUTE
TEXT
Q.VIEW
POWER
switches the set
section.
work,
reset the Communicator
sharp
one.
from
standby
or
off to
NUMBER BUTTONS
switches the set on from
standby
or
directly
on
14
SSM
7
7.
PSM
1
RESET
When Communicator does not
by pressing the reset point with
Operation'
ZOOM
?
RESET
timer.
3.
3
REPEAT
sleep
LIST
18
19
MENU
selects
standby.
select
a
number.
a menu.
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
Φ / Γ (Volume Down/Up)
adjusts the volume.
adjusts
menu
settings.
OK
accepts your selection
10. MUTE
switches the sound
or
on or
displays
the current mode.
off.
11. ARC
(Aspect Ratio Control)
changes the picture format.
12. TVCR / DVD
selects to control
a
LG video cassette recorder
13. EJECT
Open or close the
ejects the tape.
disc
14. PSM (Picture Status
recalls your preferred
tray.
Memory)
picture setting.
15. SSM (Sound Status Memory)
recalls your preferred sound setting.
4
or
DVD
player.
Location and function of controls
16. TV/AV
selects the remote operating mode.
clears the menu from the screen.
switches the set on from standby.
17. TELETEXT BUTTONS
(option)
These buttons are used for teletext.
For further details, see the 'Teletext' section.
POWER
18. LIST
19. Q.VIEW
returns to the
selects
a
previously viewed programme.
favourite programme.
COLOURED BUTTONS
TELETEXT
models)
or
These buttons
programme edit.
:
TVCR/DVD
12
6
the programme table.
displays
are
1
2
3
4
5
6
7
8
9
0
SSM
MUTE
MENU
7
used for teletext
(only
PSM
14
Internal
generator charge
15
TV/AV
16
The communicator can be charged with the internal electric genera10
tor. To charge the communicator do the followings;
1. In first use,
20 rotation of the handle in the arrow direction as picture below
-> waiting for one minute -> 20 rotation again -> waiting for one
minute again -> 20 rotation again -> beginning to use
2. In usual use
20 or 25 rotation -> resuming to use
3
8
OK
PR
VOL
VOL
9
PR
REW
PLAY
FF
PAUSE
STOP
REC
SKIP
EJECT
4
13
CLK/COUNT
CLR/RST
SP/LP
TIMER PROG
I/II
SYSTEM
1
SETUP
RETURN
TITLE
2
SLEEP
ARC
DISC MENU
TEXT
Note : Do not rotate the handle too
communicator.
Battery
rapidly for
the
protection of the
installation
The communicator is powered by two AA type batteries. To load the
batteries, turn the communicator over and open the battery compartment. Install two batteries as indicated by the polarity symbols
( + and ) marked inside the compartment.
17
11
AUDIO
SUBTITLE
REPEAT
A-B
ANGLE
PROGRAM
3D
i
? ZOOM
M
19
18
Q.VIEW
LIST
-
Note : To avoid damage from possible battery leakage, remove the
batteries if you do not plan to use the rcommunicator for an extended period of time.
5
Location and function of controls
Front
panel
72 series
Multiplex
STOP
ON/OFF
PLAY
OPEN/
CLOSE
STOP/
EJECT
DD
PLAY
RECIR
R
RC
PM
310
TV
STOP
PLAY
OPEN/
CLOSE
STOP/
EJECT
PLAY
REC/ TR
ON/OFF
DVD
TRK
COPY
13
VCR
REC
PM
TV
14
234
1
6
5
8
7
9
11
12
AV2
55 series
Multiplex
STOP
ON/OFF
PLAY
OPEN/
CLOSE
STOP/
EJECT
PAY
RECR
-BY
RECR
RREC
T
Side
STOP
PLAY
OPEN/
CLOSE
STOP/
EJECT
ON/OFF
PLAY
REC/ITR
panel
ST-BY
REC/ITR
TIMER/REC
1234
1.
2.
3.
4.
5.
MAIN POWER (ON/OFF)
switches the set on or off.
Note : Power line lives even when the power
is off.
STOP
for DVD
player.
PLAY
Starts
for DVD
player.
playback
OPEN/CLOSE
Opens or closes the disc
tray.
DISC TRAY
Places a disc
on
from
standby
or
off to
standby.
12. COMMUNICATOR SENSOR
tray.
on
the disc
13. HEADPHONE SOCKET
Connect the headphone
7.
CASSETTE COMPARTMENT
Inserts a video cassette tape here.
8.
STOP/EJECT
stops the tape during
ejects the tape.
(Light Emitting Diode)
DISPLAY
playback
or
recording
menu
a
Connect the video out socket of an VCR to the
S-VIDEO socket.
Connect the audio out sockets of the VCR to
the audio sockets as in AV2.
or
settings.
manual
recording
or
socket.
(option)
10. REC/ITR
recording.
(option)
plug to this
14. AUDIO/VIDEO IN SOCKETS (AV2)
Connect the audio/video out sockets of external equipment to these sockets.
S-VIDEO/AUDIO IN SOCKETS (S-Video)
Δ / Ε (Programme Up/Down)
selects a programme or a menu item.
switches the set on from standby.
Φ / Γ (Volume Down/Up)
adjusts the volume.
adjusts
6
/I)
switches the set
: Only use the supplied Communicator.
(When you use others, they'll be not able to
function.)
LED
starts
11.POWER(
Note
Stops playback
6.
9.
8310 15 119 12
7
5
instant timer
15. STANDBY INDICATOR
illuminates red brightly when the set is in
standby mode.
dims red when the set is switched on.
REC/ITR INDICATOR
illuminates red during recording.
TIMER REC INDICATOR
illuminates red when the timer programme is
set for recording.
Basic
operation
On and off
1.
Press the main power button
2.
set on.
If the set is in
3.
4.
on
the front of the set to switch the
/ I (POWER), Δ / Ε,
standby mode, press the
TV/AV or NUMBER buttons to switch it on fully.
Press the
/ I (POWER) button. The set reverts to standby
mode.
Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby when the mains plug is
replaced in the mains power socket.
Programme
selection
You can select
buttons.
a
I/II
POWER
1
2
3
4
5
6
7
8
9
SSM
0
MENU
TV/AV
PR
programme number with the Δ / Ε
or
NUMBER
VOL
OK
VOL
PR
Volume
MUTE
adjustment
Q.VIEW
Press the Φ / Γ button to
adjust
the volume.
Quick view
POWER
Press the Q.VIEW button to view the last programme you
were
watching.
This function works only when Favourite programme is
set to Off. Otherwise each press of this button will select a stored
favorite programme.
Note
1
2
3
4
5
6
7
8
9
0
SSM
MUTE
MENU
:
TV/AV
Mute function
Press the MUTE button. The sound is switched off and the
OK
display
W appears.
You
can
cancel it
by pressing
the MUTE, Φ / Γ, SSM, I/II button.
PR
VOL
VOL
PR
On
screen
language
selection (option)
an optional function. In the models which have on screen
language function, the menu can be displayed on the screen in the
desired language. First select your language.
This is
1.
2.
3.
4.
5.
the MENU button to select the Station menu.
Press the Δ / Ε button to select Language.
Press the Γ button and then use the Δ / Ε button to select your
desired language.
Press the OK button.
All the on screen displays will appear in the selected language.
Press the TV/AV button to return to normal TV viewing.
I/II
Repeatedly press
Q.VIEW
7
On
screen menus
The
an
dialogue
operator
also
between you and your set takes place on screen with
The buttons required for the operating steps are
menu.
displayed.
Menu selection
1.
2.
3.
the MENU button to display each menu.
Press the Δ / Ε button to select a menu item.
The selected menu item changes from white to purple.
Press the Γ button to change the setting of a menu item or OK
button to display the sub menu.
Repeatedly press
Note :
In the teletext mode, menus are not displayed.
a.
b. In some models, the Index, Tilt or Language will not
display.
MENU
PR
VOL
OK
VOL
PR
Auto programme
PSM
Manual programme
Contrast
Programme edit
Brightness
50
Favourite programme
Colour
70
Language
Sharpness
50
ΔΕΦΓOKMENUTV/AV
ΔΕΦΓOKMENUTV/AV
Station
Dynamic
100
Picture
menu
SSM
menu
Music
Balance
0
AVL
Off
§Volume
30
MENU
ΔΕΦΓOKMENUTV/AV
Sound
OK
menu
PR
VOL
VOL
PR
Clock
--:---.--.----
Off
Time
OnTime
-
-:-
-
---
Hold
Input
TV
Child lock
Off
Auto
Off
--:--Hold
Index
PR1VOL30
Tilt
sleep
On
0
Off
Degauss
ΔΕΦΓOKMENUTV/AV
Time
8
ΔΕΦΓOKMENUTV/AV
menu
Special
menu
Setting up
TV stations
Up to 100 TV stations can be stored in this set by programme numbers
(0 to 99). Once you have preset the stations, you will be able to use
the Δ / Ε or NUMBER buttons to scan the stations you programmed.
Stations can be tuned using automatic or manual modes.
Auto programme
All stations that
can
ommended that you
use
Manual programme
Programme edit
Favourite programme
Language
ΔΕΦΓOKMENUTV/AV
tuning
be received
Auto programme
are
stored
auto programme
by this method. It
during installation
is recof this
set.
1.
2.
3.
the MENU button to select the Station menu.
Press the Δ / Ε button to select Auto programme.
Press the Γ button to display the Auto programme menu.
Repeatedly press
System
Storage
BG
from
5
Start
ΔΕΦΓOKMENUTV/AV
1
2
3
4
5
6
7
8
9
0
MENU
TV/AV
PR
4.
5.
6.
7.
8.
Press the Φ / Γ button to select the beginning system;
BG : (Asia/New Zealand/M.East/Africa/Australia)
I
: (Hong Kong/South Africa)
DK : (East Europe/China/Africa/CIS)
M
: (USA/Korea/Philippines) (option)
VOL
OK
VOL
PR
Press the Δ / Ε button to select Storage from.
Select the beginning programme number with the Φ / Γ button
or NUMBER buttons. Any number under 10 is entered with a
numeric '0' in front of it, i.e. '05' for 5.
Press the Δ / Ε button to select Start.
Press the OK button to begin auto programming.
System
Storage
BG
from
5
Start
5
1
2
3
4
5
6
7
8
9
16%
MENU
All receivable stations
are
stored.
0
To stop auto programming, press the MENU button.
When auto programming is completed, the Programme edit
menu appears on the screen. See the 'Programme edit' section
to edit the stored programme.
9.
Press the TV/AV button to return to normal TV
viewing.
MENU
TV/AV
OK
PR
VOL
VOL
PR
9
Setting up
TV stations
Manual programme
Auto programme
Manual programme
tuning
Programme edit
Favourite programme
Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station
name with five characters to each programme number.
Language
ΔΕΦΓOKMENUTV/AV
1.
2.
3.
the MENU button to select the Station menu.
Press the Δ / Ε button to select Manual programme.
Press the Γ button to display the Manual programme
Repeatedly press
menu.
BG
System
Channel
V/UHF
20
ΓΓΓ
Fine
Search
Name
C20
1
Storage
ΔΕΦΓOKMENUTV/AV
1
2
3
4
5
6
7
8
4.
9
0
MENU
BG
I
DK
M
TV/AV
PR
VOL
OK
VOL
5.
PR
Press the Δ / Ε button to select
System. Press the
beginning system;
(Asia/New Zealand/M.East/Africa/Australia)
(Hong Kong/South Africa)
(East Europe/China/Africa/CIS)
(USA/Korea/Philippines) (option)
Φ / Γ but-
ton to select the
6.
:
:
:
:
Press the Δ / Ε button to select Channel. Press the Φ / Γ
button to select V/UHF or Cable as required.
If possible, select the channel number directly with the number
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
Press the Δ / Ε button to select Search. Press the Φ / Γ button to commence searching. If a station is found the search will
stop.
7.
If this station is the one required, press the Δ / Ε button to select
the desired programme number (0 to 99) with
Storage. Select
1
2
3
4
5
6
8.
the Φ / Γ button or NUMBER buttons. Any number under 10 is
entered with a numeric '0' in front of it, i.e. '05' for 5.
Press the OK button to store it. The display Stored will appear.
Channel
7
8
9
Fine
Storage
MENU
TV/AV
OK
PR
VOL
VOL
PR
10
V/UHF
20
ΓΓΓ
Search
Name
0
BG
System
C20
1
Stored
9. To store another station, repeat steps 4 to 8.
10. Press the TV/AV button to return to normal TV
viewing.
TV stations
Setting up
Assigning a station name
1. Repeat the 'Manual programme tuning' steps
2.
Press the Δ / Ε button to select Name.
3.
Press the Γ and then
use
Auto programme
Manual programme
1 to 3.
Programme edit
Favourite programme
Language
the Δ / Ε button. You
can use a
4.
.,thenumeric0to9andthealphabetAtoZ.
Select the next position by pressing the OK button
5.
your choice of the second character, and
Press the OK button.
6.
Press the TV/AV button to return to normal TV
blank,
ΔΕΦΓOKMENUTV/AV
+, -,
Fine
viewing.
tuning
Normally
1.
and then take
so on.
fine
tuning
is
only necessary
if
reception
is poor.
2.
the 'Manual programme tuning' steps 1 to 3.
Press the Δ / Ε button to select Fine.
3.
Press the Φ / Γ button to fine tune for the best
Repeat
picture
MENU
TV/AV
and
PR
sound.
4.
VOL
Press the OK button.
BG
System
Channel
V/UHF
OK
VOL
PR
20
ΓΓΓ
Fine
Search
Name
C20
1
Storage
ΔΕΦΓOKMENUTV/AV
5.
Press the TV/AV button to return to normal TV
finely tuned programme will
during programme selection.
The
be indicated
viewing.
by yellow number
MENU
TV/AV
OK
PR
VOL
VOL
PR
11
Setting up
Auto programme
Programme
Manual programme
Programme edit
TV stations
edit
This function enables you to delete or skip the stored programmes.
Also you can move some stations to other programme numbers or
insert a blank station data into the selected programme number.
Favourite programme
Language
ΔΕΦΓOKMENUTV/AV
1.
2.
3.
the MENU button to select the Station menu.
Press the Δ / Ε button to select Programme edit.
Press the Γ button to display the Programme edit menu.
Repeatedly press
0C03
5S69
1C03
6S17
2C12
7S22
3S66
8C09
4S67
9C11
Delete
Copy
Skip
Move
1
2
3
4
5
6
7
8
9
ΔΕΦΓOKMENUTV/AV
Deleting
0
MENU
TV/AV
1.
2.
PR
VOL
OK
VOL
a programme
Select a programme to be deleted with the Δ / Ε or Φ / Γ button.
Press the RED button twice.
The selected programme is deleted, all the following programmes are shifted up one position.
Copying
PR
1.
2.
a programme
Select a programme to be copied with the Δ / Ε
Press the GREEN button.
All the following programmes are shifted down
Moving
1.
2.
3.
or Φ
one
/ Γ button.
position.
a
programme
Select a programme to be moved with the Δ / Ε or Φ / Γ button.
Press the YELLOW button.
Move the programme to the desired programme number with
theΔ/ΕorΦ/Γbutton.
4.
1
4
7
2
5
8
Press the YELLOW button
3
6
9
MENU
5S69
1C03
6S17
2C12
7S22
3S66
8C09
4S67
9C11
2.
3.
PR
VOL
a programme number
Select a programme number to be skipped with the Δ / Ε or Φ / Γ
button.
Press the BLUE button. The skipped programme turns to blue.
Press the BLUE button again to release the skipped pro-
Skipping
OK
PR
0C03
Move Off
1.
VOL
to release this function.
ΔΕΦΓOKMENUTV/AV
0
TV/AV
again
gramme.
When a programme number is skipped it means that you will be
unable to select it using the Δ / Ε button during normal TV
viewing. If you want to select the skipped programme, directly
enter the programme number with the NUMBER buttons or
select it in the programme edit or table menu.
Press the TV/AV button to return to normal TV
12
viewing.
Setting up
TV stations
Favourite programme
Auto programme
Manual programme
This function lets you select your favourite programmes
1.
2.
3.
directly.
Repeatedly press the MENU button to select the Station menu.
Press the Δ / Ε button to select Favourite programme.
Press the OK button to display the Favourite programme
Programme edit
Favourite programme
Language
ΔΕΦΓOKMENUTV/AV
menu.
Off
--
-----
--
-----
--
-----
--
-----
--
-----
--
-----
--
-----
--
-----
--
-----
--
-----
ΔΕ
4.
5.
6.
7.
8.
Φ Γ
MENU TV/AV
Press the Φ / Γ button to select On.
-----.
Press the Δ / Ε button to select
Select a desired programme with the Φ / Γ button or NUMBER
buttons. Any number under 10 is entered with a numeric '0' in
front of it, i.e. '05' for 5.
To store another programme, repeat steps 5 to 6.
You can store up to 10 programmes.
Press the TV/AV button to return to normal TV viewing.
1
2
3
4
5
6
7
8
--
Repeatedly press
9
TV/AV
PR
VOL
OK
VOL
PR
the Q.VIEW button to select stored favourite pro-
grammes.
Calling
0
MENU
Q.VIEW
LIST
the programme table
You can check the programmes stored in the memory
the programme table.
by displaying
table
Press the LIST button to display the Programme table menu.
The programme table appears on the screen. One programme
table contains ten programmes as below.
Displaying programme
0C03
5S69
1C03
6S17
2C12
7S22
3S66
8C09
4S67
9C11
1
2
3
4
5
6
7
8
9
0
ΔΕ
Φ Γ
MENU TV/AV
MENU
TV/AV
Note :
a.
You may find some blue programmes. They have been set up to
be skipped by auto programming or in the programme edit mode.
b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned.
OK
PR
VOL
VOL
PR
a programme in the programme table
Select a programme with the Δ / Ε or Φ / Γ button.
Then press the OK button.
The set switches to the chosen programme number.
Selecting
a programme table
10 programme table pages in which contain 100 pro-
Paging through
There
are
grammes.
Pressing the Δ / Ε
or Φ
/ Γ button
repeatedly
Press the LIST button to return to normal TV
turns the pages.
Q.VIEW
LIST
viewing.
13
Picture
PSM
Dynamic
100
Contrast
Brightness
50
Colour
70
Sharpness
50
adjustment
PSM (Picture Status
1.
2.
3.
Memory)
Repeatedly press the MENU button to select the Picture menu.
Press the Δ / Ε button to select PSM.
Press the Φ / Γ button to select a picture setting on the PSM
menu.
ΔΕΦΓOKMENUTV/AV
PSM
Dynamic
100
Contrast
ARC
Brightness
50
Colour
70
Sharpness
50
ΔΕΦΓOKMENUTV/AV
4.
Press the TV/AV button to return to normal TV
You
also
a desired picture (Dynamic, Standard,
User) with PSM button on the Communicator. The
picture Dynamic, Standard, Mild and Game are programmed
for optimum picture reproduction at the factory and cannot be
changed.
can
Mild, Game
PSM
Picture
MENU
TV/AV
PR
You
can
OK
recall
or
adjustment
adjust picture contrast, brightness, colour intensity, sharp(NTSC input only) to the levels you prefer.
and tint
ness
VOL
viewing.
VOL
1.
2.
PR
3.
press the MENU button to select the Picture menu.
Press the Δ / Ε button to select the desired picture item.
Press the Φ / Γ button to make appropriate adjustments, then
it will be stored for the picture User.
Repeatedly
PSM
User
Contrast
90
Brightness
70
Colour
60
Sharpness
53
ΔΕΦΓOKMENUTV/AV
4.
PSM
MENU
TV/AV
Press the TV/AV button to return to normal TV
viewing.
Picture format
You
OK
PR
VOL
VOL
PR
can watch TV in various picture formats; 4:3, 16:9 (Wide), Zoom.
Repeatedly press the ARC button to select your desired picture format.
4:3
This
picture
16:9
You can
format is 4 to 3 of
general
enjoy the cinema (the picture
through the 16:9 mode.
TV.
format of
16:9)
or
general
TV
programme
Zoom
You can enjoy the cinema in a vast screen through the Zoom mode.
The screen 4:3 is magnified to the upper/lower. The bottom and top
of the picture may be lost.
Note
:
picture
ARC
14
When you switch the set to standby or off, the 16:9
format is reset to the Standard (4:3).
or
Zoom
Sound
SSM
adjustment
(Sound Status Memory)
You can select your preferred sound
Movie or Speech and you can also
SSM
Music
Balance
setting; Virtual (option), Flat, Music,
adjust the sound frequency of the
0
AVL
Off
§Volume
30
equalizer.
1.
2.
3.
press the MENU button to select the Sound
Press the Δ / Ε button to select SSM.
Press the Φ / Γ button to select a sound setting on the SSM
Repeatedly
SSM
menu.
ΔΕΦΓOKMENUTV/AV
menu.
User
Balance
0
AVL
Off
§Volume
30
ΔΕΦΓOKMENUTV/AV
Sound Frequency Adjustment
a. Press the OK button in User.
SSM
MENU
TV/AV
PR
OK
0.1
0.5
1.5
5.0
10kHz
VOL
VOL
ΔΕΦΓOKMENUTV/AV
PR
b. Select a sound band by pressing the Φ / Γ button.
c. Make appropriate sound level with the Δ / Ε button.
d. Press the OK button to store it for the sound User.
The display Stored will appear.
Press the TV/AV button to return to normal TV
You
also recall
viewing.
desired sound
Virtual (option), Flat,
setting (
User) with SSM button on the
Communicator. The sound settings
Virtual (option), Flat, Music,
Movie and Speech are programmed for optimum sound reproduction
at the factory and cannot be changed.
can
a
Music, Movie, Speech
or
If you press the SSM button after making appropriate adjustthe User sub menu, the display User automatically
appears even though you have already set a factory preset setting;
Virtual (option), Flat, Music, Movie or Speech.
Note
:
ment on
Sound
adjustment
You
can adjust balance, AVL (Auto
cally keeps on an equal volume level
1.
2.
Volume Leveler). AVL automatiif you change programmes.
even
press the MENU button to select the Sound menu.
Press the Δ / Ε button to select the desired sound item;
SSM
Repeatedly
Balance, AVL
or
MENU
TV/AV
§Volume.
SSM
Balance
AVL
§Volume
OK
Flat
0
On
PR
30
VOL
VOL
PR
ΔΕΦΓOKMENUTV/AV
3.
4.
Make desired adjustment with the Φ / Γ and then press the OK
button.
Press the TV/AV button to return to normal TV viewing.
Note
:
In
Virtual
mode, AVL is not available.
15
Sound
adjustment
Stereo/Dual
C
reception (option)
Stereo/dual is an optional function.
When a programme is selected, the sound information for the station appears after the programme number and station name disappear.
I/II
Broadcast
On Screen
Mono
MONO
Stereo
STEREO
Dual
DUAL I
Display
Mono sound selection
In stereo reception if the stereo signal is weak, you can switch to
mono by pressing the I/II button twice. In mono reception the depth
of sound is improved. To switch back to stereo, press the I/II button twice again.
selection for dual language broadcast
If a programme received in two languages (dual language), you can
switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly.
DUAL I sends the primary broadcast language to the loudspeakers.
DUAL II sends the secondary broadcast language to the loud-
Language
speakers.
DUAL I+II sends
NICAM
a
separate language
to each
loudspeaker.
reception (option)
If your set is equipped with the receiver for NICAM reception, the
high quality NICAM (Near Instantaneous Companding Audio
Multiplex) digital sound can be received.
Sound output can be selected according to the type of received
broadcast as follows by pressing the I/II button repeatedly.
1.
2.
3.
I/II
When NICAM mono is received, you can select NICAM
MONO or FM MONO.
When NICAM stereo is received, you can select NICAM
STEREO or FM MONO. If the stereo signal is weak, switch to
FM mono.
When NICAM dual is received, you can select NICAM DUAL
I, NICAM DUAL II or NICAM DUAL I+II or MONO. When
FM mono is selected the display MONO appears on the
screen.
Sound output selection
In AV mode, you
can
select output sound for the left and
right
loud-
speakers.
Repeatedly press the I/II button to select the sound output.
:
Audio signal from audio L input is sent to left loud-speaker
and audio signal from audio R input is sent to right loudspeaker.
L+L :
Audio signal from audio L input is sent to left and right loudspeakers.
R+R :
Audio signal from audio R input is sent to left and right loudspeakers.
L+R
16
Other functions
AV and DVD modes
TV,
be set for TV, AV or DVD modes. AV mode is used when
a video cassette recorder (VCR), or other equipment is connected to
the set.
Inputs
can
Input
TV
Child lock
Off
Auto
Off
sleep
Index
On
0
Tilt
Off
Degauss
ΔΕΦΓOKMENUTV/AV
Note : When a VCR is connected via the aerial socket the set is used
in TV mode. See the 'Connection of external equipment' section.
1.
2.
the MENU button to select the
Press the Δ / Ε button to select Input.
Repeatedly press
Special
menu.
AV1
Input
Child lock
Off
Auto
Off
sleep
Index
On
0
Tilt
Off
Degauss
ΔΕΦΓOKMENUTV/AV
3.
Press the Φ / Γ button to select TV, AV 1, AV 2
or DVD.
(or S-Video)
To return to TV mode, press the Δ / Ε
or
NUMBER buttons.
select the TV, AV
or
DVD modes
1
2
3
4
5
6
7
8
9
0
MENU
TV/AV
PR
Alternatively you
can
by pressing
the TV/AV button.
VOL
OK
VOL
PR
Child lock
The TV can be set so that the Communicator is needed to control it.
This feature can be used to prevent unauthorized viewing.
1.
2.
3.
4.
the MENU button to select the Special menu.
Press the Δ / Ε button to select Child lock.
Press the Φ / Γ button on the Communicator to select On.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
With the lock on, the display Child lock on appears on the screen
if any button on the front panel is pressed while viewing the TV.
Note : The display Child lock on will not appear on the screen if
any button on the front panel is pressed while displaying the menus.
Auto
sleep
If you select On on the Auto sleep menu, the set will automatiswitch itself to standby mode approximately ten minutes after
a TV station stops broadcasting.
1
2
3
4
5
6
7
8
9
0
cally
1.
2.
3.
4.
the MENU button to select the Special
Press the Δ / Ε button to select Auto sleep.
Press the Φ / Γ button to select On.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
MENU
TV/AV
menu.
OK
PR
VOL
VOL
PR
17
Other functions
Input
TV
Child lock
Off
Auto
Off
sleep
Index
On
0
Tilt
Off
Degauss
ΔΕΦΓOKMENUTV/AV
LED DISPLAY
You
can
1.
2.
3.
adjustment (option)
switch LED DISPLAY
on or
off.
Repeatedly press the MENU button to select the
Press the Δ / Ε button to select Index.
Press the Φ / Γ button to select On or Off.
menu.
AV1
Input
Child lock
Off
Auto
Off
sleep
Index
SLEEP
Special
On
0
Tilt
Off
Degauss
ΔΕΦΓOKMENUTV/AV
When you select On mode, The LED DISPLAY illuminates
brightly.
4.
Press the TV/AV button to return to normal TV
Tilt
(option)
The TV
another
MENU
TV/AV
PR
VOL
OK
VOL
1.
2.
3.
4.
viewing.
picture may tilt to the
position. This function
left
can
or right if the TV set moves to
be used to compensate the tilt.
the MENU button to select the Special
Press the Δ / Ε button to select Tilt.
Press the Φ / Γ button to adjust the tilt.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
menu.
PR
Degaussing (option)
to the super large Braun Tube in the set the magnetic field
of the earth may influence on the colour purity of picture by neighbour magnetic substance or installation direction of the set. The
stripes may appear on the screen or the colour may not be equal in
the corner. You can enjoy the programme in high colour quality by
operating the Degaussing.
Owing
TV/AV
MENU
1.
2.
OK
3.
4.
PR
VOL
VOL
PR
the MENU button to select the Special menu.
Press the Δ / Ε button to select Degauss.
Press the Φ / Γ button to select On. After the degauss function
works, On mode switches to Off mode.
Press the TV/AV button to return to normal TV viewing.
Repeatedly press
Note : If you cannot adjust the
it again after about 4 minutes.
Sleep
screen
condition
by degaussing, try
timer
You don't have to remember to switch the set off before you go to
sleep. The sleep timer automatically switches the set to standby
after the preset time elapses.
Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60,
play
90, 120, 180 and 240. The timer begins to count down from the
number of minutes selected.
-
-
-
SLEEP
Note :
a.
To view the remaining sleep time, press the SLEEP button once.
b.
To cancel the sleep time, repeatedly press the SLEEP button
until the display
appears.
c.
When you switch the set off, the set releases the preset sleep
time.
-
18
-
-
Time
setting
Clock
Clock
--:---.--.----
Off
The time uses the 24 hour system and must be set to the correct
time before operating the set.
Time
-
OnTime
-:-
-
---
Hold
--:--Hold
PR1VOL30
ΔΕΦΓOKMENUTV/AV
1.
2.
3.
4.
the MENU button to select the Time menu.
Press the Δ / Ε button to select Clock.
Select and adjust hour and minute by pressing the Φ / Γ and
Δ / Ε button.
Select and adjust the day, the month and the year by pressing
Repeatedly press
theΦ/ΓandΔ/Εbutton.Thedayoftheweekisautomatically displayed.
5.
6.
Press the OK button to start.
Press the TV/AV button to return to normal TV
viewing.
Note :
The clock operates for at least 10 minutes, if the power is
switched off or there is a power interruption (disconnection or
a.
b.
power failure).
If you have already set the timer programme, you cannot reset
the clock. To reset the clock, first cancel timer programme set-
tings.
MENU
TV/AV
PR
VOL
OK
VOL
PR
On/Off Time
By using this function, the set automatically switches on or off at a
preset time. You must set the time correctly before using on/off time
function.
1.
2.
3.
4.
5.
6.
7.
the MENU button to select the Time menu.
Press the Δ / Ε button to select On Time or Off Time.
Select and adjust hour and minute by pressing the Φ / Γ and
Δ / Ε button.
Repeatedly press
SelectandadjustRunorHoldbypressingtheΦ/ΓandΔ/Ε
button.
Only On Time function; Select and adjust programme number and volume level by pressing the Φ / Γ and Δ / Ε button.
Press the OK button to start.
Press the TV/AV button to return to normal TV viewing.
Note :
In the event of power interruption (disconnection or power faila.
ure), the clock must be reset.
b. If the same time is set for the on time and the off time, only the
off time operates.
c.
This set must be put into standby mode with the
/ I (POWER)
button to operate the on time function.
d.
Two hours after the set is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
e.
Once the on or off time is set, these functions operate daily at
the preset time.
MENU
TV/AV
OK
PR
VOL
VOL
PR
19
Teletext
(option)
Teletext (or TOP text) is an optional function, therefore only
with the teletext system can receive the teletext broadcast.
a
set
free service broadcast by most TV stations which gives
information on news, weather, television programmes, share prices and many other topics.
Teletext is
a
up-to-the-minute
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern
methods allowing quick and easy selection of teletext information.
M
1
2
3
4
5
6
7
8
9
Switch on/off
Press the TEXT button to switch to teletext.
The initial page or last page appears on the screen.
Two page numbers, TV station name, date and time are displayed
on the screen headline. The first page number indicates your selection, while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
0
TV/AV
PR
VOL
OK
VOL
reappears.
PR
TEXT
SIMPLE text
selection
Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number.
The Δ / Ε button can be used to select the preceding or fol-
Page
1.
1
2
3
4
5
6
7
8
9
2.
lowing page.
Programming
0
a
colour button in LIST mode
If the TV is in SIMPLE text, TOP text
M
button to switch to LIST mode.
or
FASTEXT mode, press the
TV/AV
Four teletext page numbers of your choice can be colour coded and
easily selected by pressing the corresponding coloured button on
OK
the Communicator.
PR
VOL
VOL
1.
Using
2.
gramme.
Wait until the page is displayed on the screen and press the OK
button. The page numbers in the colour boxes along the bottom
PR
TEXT
M
20
the NUMBER buttons, select the page you wish to pro-
to "000?".
of the
screen
3.
Press
a
4.
you can
The three other coloured buttons
change
colour button to store the page number. From now on,
select this page with the same coloured button.
are
programmed
in the way.
Teletext
TOP text
(option)
(option)
The user guide displays four fields-red, green, yellow and blue at
the bottom of the screen. The yellow field denotes the next group
and the blue field indicates the next block.
Block / group / page selection
1. With the blue button you can progress from block to block.
2. Use the yellow button to proceed to the next group with automatic overflow to the next block.
3. With the green button you can proceed to the next existing
page with automatic overflow to the next group.
Alternatively the Δ button can be used.
4. The red button permits to return to previous selection.
Alternatively the Ε button can be used.
Direct page selection
Corresponding to the SIMPLE teletext mode, you can select a page
by entering it as a three digit number using the NUMBER buttons in
TOP mode.
i
1
2
3
4
5
6
7
8
9
0
PR
PR
FASTEXT
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
selection
i
Press the
button to select the index page.
You can select the pages which are colour coded along the bottom line with the same coloured buttons.
Corresponding to the SIMPLE teletext mode, you can select a
page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The Δ / Ε button can be used to select the preceding or fol-
Page
1.
2.
3.
4.
1
2
3
4
5
6
7
8
9
lowing page.
0
PR
PR
i
21
Teletext
Special
(option)
teletext functions
REVEAL
Press this button to
display concealed information, such as
puzzles.
again to remove the information from the
solutions of riddles
Press this button
or
display.
?
SIZE
Selects double
1
2
3
Press this
4
5
6
7
8
9
height text.
enlarge the top
button again to enlarge
Press this button to
0
page.
Press this button
again
half of the page.
the bottom half of the
to return to the normal
display.
PR
UPDATE
Displays
the TV
picture
on
the
screen
while
waiting
for the
new
will appear at the top left hand
teletext page. The display
corner of the screen. When the updated page is available then
PR
will change to the page number.
Press this button to view the updated teletext page.
display
HOLD
Stops
the automatic page
change
which will
occur
if
a
tele-
text page consists of 2 or more sub pages. The number of
1
2
3
sub pages and the sub page displayed is, usually, shown on
the screen below the time. When this button is pressed the
4
5
6
stop symbol is displayed
7
8
9
at the
top left-hand
corner
of the
and the automatic page change is inhibited.
To continue press this button again.
screen
0
MIX
Displays
the teletext pages
superimposed
on
the TV
pic-
ture.
To switch the TV
picture
off press this button
again.
PR
TIME
PR
viewing a TV programme, press this button to display
the time at the top right hand corner of the screen. Press this
button again to remove the display. In the teletext mode,
When
press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or
the sub page, press the RED/GREEN, Δ / Ε
NUMBER buttons.
change
?
Press
22
again
to exit this function.
or
VCR
operation
Playing tapes
To
play back a VHS video cassette tape which has no safety tab in
position (this means you cannot record on to it), insert it into the set
in the standby mode.
The set will at once switch itself on and perform the following
sequence by itself:
REW
PLAY
FF
PAUSE
STOP
PLAY
STOP
->
->
REWIND
->
EJECT
To
play back a VHS video cassette tape which has its safety tab in
position (this means that you have recorded on it and left the tab
untouched), insert it into the set in the standby mode.
Now you must press the PLAY button.
To
stop playback, press the STOP button.
To take out the
Note
a.
:
Timer programme set, if you try to insert a video casa safety tab in standby mode, the tape will
automatically be ejected.
In some models, only SP (Standard Play) speed is available.
During
sette
b.
EJECT
tape, press the EJECT button.
tape without
Tape tracking
PR
control
tape is correctly aligned with the playback
head. It works only during playback and its principal purpose is to
minimize picture shake and noise (fuzzy lines across the picture). It
is adjusted automatically or manually.
Tracking
ensures
that the
PR
Auto tracking
Whenever playback starts, auto tracking automatically adjusts the
picture. The display A.TRK will appear while the best picture is
selected.
Manual
You can
tracking
manually adjust
Vertical lock
You can manually
still mode.
Pause/still
adjust
the
picture by pressing
the
picture by pressing
the Δ / Ε button.
the Δ / Ε button in
picture
PR
To
temporarily pause playback, press the PAUSE button. A still picture and the display II will appear on the screen. If a still picture
lasts for more than five minutes, the set will switch to the play back
mode to protect the tape and the video heads. To restart play back,
press the PLAY button.
To temporarily stop recording, press the PAUSE button. The
will appear. Press this button again to continue recording.
PR
REW
PLAY
PAUSE
STOP
FF
display
EJECT
Fast forward, cue, rewind and review
Forward search
Press the FF ΓΓ button during playback.
The display ΓΓ will appear and the tape plays faster than normal
speed. Press the PLAY button to return to normal speed.
23
VCR
operation
Pressing the FF ΓΓ button in the stop mode winds the tape forward at high speed. Then the display ΓΓ will appear on the screen.
If you press and hold the FF ΓΓ button in this mode, the searching picture will appear. This enables you to see what is on the tape.
To return to the FF mode, release the FF ΓΓ button.
Com
SYSTEM
CLK/COUNT
CLR/RST
PLAY
FF
REW
If the tape winds forward to the end, it will automatically
rewind to the beginning and then eject the tape.
stop,
Reverse search
Press the ΦΦ REW button during playback.
The display ΦΦ will appear and the tape will play in reverse faster
than normal speed. Press the PLAY button to return to normal playback.
Pressing the ΦΦ REW button in the stop mode rewinds the tape
backward at high speed. Then the display ΦΦ will appear on the
STOP
screen.
If you press and hold the ΦΦ REW button in this mode, the searching picture will appear. This enables you to see what is on the tape.
To return to the REW mode, release the ΦΦ REW button.
Note
:
Sound is
automatically muted during these operations.
Clock/Count selection
Each time the CLK/COUNT button is pressed, the current time and
the tape counter appears alternately.
The tape counter displays the tape travel time in hours, minutes
and seconds during recording and playback.
Note
when
:
To reset the counter to 0:00:00, press the CLR/ RST button
the counter.
displaying
Memory stop
The memory stop makes it easy to return to a particular spot
tape after recording or playback. The tape automatically
when the counter reaches M 0:00:00.
1.
2.
REW
PLAY
FF
3.
4.
STOP
on
the
stops
Start recording or playback.
Press the CLK/COUNT button 3times to display tape counter.
Press the CLR/RST button at the point you want to review. The
counter displays M 0:00:00.
Press the STOP button when you finish recording or playing the
tape.
5.
Press the ΦΦ REW button to rewind the tape. The
point M 0:00:00.
Press the PLAY button to play back the tape.
tape stops
at the
6.
CLK/COUNT
CLR/RST
SYSTEM
VCR colour system
setting
You can adjust the VCR colour system. Under normal circumstances,
select AUTO. If necessary (if input signal is weak), change the colour
system by using the instructions below.
1.
Press the SYSTEM button. The VCR System mode will
appear.
2.
Repeatedly
press the SYSTEM button to select the correct sys-
tem.
Note :
a.
NTSC PB is for playback only. You cannot record NTSC signals.
b. If the picture is no colour during playing back a MESECAM
video cassette tape in AUTO, select MESECAM instead of
AUTO.
24
Recording
Manual
recording
This is the function used to record a TV programme or signal from
external equipment onto a video cassette tape. The set cannot
record any programme in the NTSC system as the NTSC system is
only for playback.
1.
2.
3.
Insert a tape with the safety tab into the cassette compartment.
Note : Select the recording tape speed SP or LP with the SP/LP
button after inserting a tape with the safety tab. You'd better
select the tape speed SP.
Press the REC button once. The display appears on the screen.
The REC indicator will illuminate.
When the desired recording is completed, press the STOP button.
If the tape reaches the end before you press the STOP button, the
set automatically stops, rewinds to the beginning and ejects the
tape.
STOP
REC
POWER
Note :
If you try to record
a.
tape without a safety tab, it will be autoprevent accidental erasure. If you want to
the tape without the safety tab, stick a small piece of tape
matically ejected
use
a
to
the safety tab hole.
If you don't wish to monitor while recording, press the
/ I button on the set or POWER button on the Communicator to reverts
to standby mode.
over
b.
WARNING
Unauthorized recording of copyrighted programmes, films, video
tape and other materials may infringe upon the right of copyright
owners and be contrary to copyright laws.
Instant timer
POWER
recording (ITR)
This function is convenient when you want to start recording immediately without going through the entire timer setting procedure. You
don't have to set the time to use this function.
1.
2.
Insert a tape with a safety tab.
Press the REC button twice.
will appear with the recording programme
The display ITRnumber.
Repeatedly press the REC button to set the recording length,
which appears on the screen. You can select up to 9 hours at
30-minute intervals.
-:-
3.
-
To cancel the ITR function, press the REC button until the
ITRappears.
-:-
display
STOP
REC
-
25
Recording
Timer programme
setting
You
can programme the set to start and end
away. Up to 5 recordings within one month
at the same time.
are
1.
TIMER PROG
CLR/RST
2.
3.
4.
PR
Press the TIMER PROG button on the Communicator to display
the Timer programme menu. The current time and the day
of the week automatically appears under the display Timer
programme.
Press the Δ / Ε button to select a recording item.
Select PR with the Γ button and set the programme number
with the Δ / Ε button.
Select Date with the Γ button and set a Day/Month with the
Δ / Ε button.
If the date is January 23, the Timer programme mode
appears as shown below.
23.01.2004.Fri
VOL
OK
recording while you
be programmed
can
PR
10
VOL
--
PR
--
--
--
11:40
Date
Start
Stop
23/01
--/---/---/---/--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
SP
SP
SP
SP
SP
ΔΕΦΓOKMENUTV/AV
Each time you press the Δ button, the date
24/01
->
25/01
31/01
->
01/02
->
changes as shown
02/02
...
below.
23/02
Each time you press the Ε button, the date changes as shown below.
-> SUN -> MON
SAT -> MON-SAT
-> MON-FRI -> SAT-SUN
Select Start with the Γ button.
Every Day
5.
...
...
AndsetthestartHour:MinutewiththeΔ/ΕorΦ/Γbutton.
6.
7.
8.
9.
PR
VOL
VOL
PR
CLR/RST
TIMER PROG
26
Select Stop with the Γ button and set stop Hour : Minute with
theΔ/ΕorΦ/Γbutton.
Select the tape speed position with the Γ button and select the
recording tape speed SP or LP with the Δ / Ε button.
Press the OK button.
Press the TIMER PROG button to return to normal TV
After you finish programming, insert
TIMER REC indicator will illuminate.
a
tape with
a
safety
viewing.
tab. The
Note :
If you want to cancel a timer programme, select the recording
a.
item with the Δ / Ε button, press the CLR/RST button.
b. If you press the OK button after pressing an incorrect digit accidently or setting the start and stop time that have already past,
the recording will automatically be erased.
If the clock has not yet been set, when you try to set timer proc.
gramme the Time menu will appear. Set the time and date
before proceeding.
d.
When the set is in standby mode after setting a timer programme,
the TIMER REC indicator will blink.
e.
This set must be put into standby mode with
/ I (POWER) button to operate the timer programme function.
DVD
Notes
on
operation
discs
On handling discs
Do not touch the playback side of the disc.
Do not attach paper or tape to discs.
?
?
On storing discs
Do not store discs in a place subject to direct sunlight or near
heat sources.
Do not store discs in place subject to moisture and dust such as
a bathroom or near a humidifier.
Store discs vertically in a case. Stacking or placing object on
discs outside of their case may cause warping.
?
?
?
On
?
?
cleaning discs
Fingerprints and dust on the disc cause picture
rioration. Wipe the disc from the center outward
Always keep the disc clean.
Do not
use
and sound detewith a soft cloth.
any type of solvent such as thinner, benzine, comor antistatic spray for vinyl LPs. It
mercially available cleaners
may damage the disc.
"
"
Note:"
may appear on the TV screen during operation. A
means that the operation is not permitted by the unit or the disc.
"
Structure of disc contents
DVD video disc
disc
??????
Title
??
CAUTION:
This Digital Video
Disc Player employs
a Laser System.
To
ensure
proper
use
of this product, please read this
owner's manual carefully and retain for
future reference should the unit require
maintenance, contact an authorized service location (see service procedure).
Use of controls, adjustments, or the performance of procedures other than those
specified herein may result in hazardous
radiation exposure.
To prevent direct exposure to laser beam,
do not try to open the enclosure. Visible
laser radiation when open. DO NOT
STARE INTO BEAM.
??
CAUTION: The
Chapter
apparatus should
Video CD/Audio CD
Regional
code of the DVD
This
??
Index
?
?
Title :When two or
is divided into two
"TITLE".
movies are recorded on a disc, the disc
sections. Each section is called a
or more
Chapter : The titles can be subdivided into many sections. Each
section is called a "CHAPTER".
Track : An audio CD can contain several items. These are
assigned to the tracks.
Note
If
a.
b.
more
DVD
is
player
designed
playback of region
??????
Track
??
and
player
DVDs
disc
?
not be
exposed to water (dripping or splashing)
and no objects filled with liquids, such as
vases, should be placed on the apparatus.
and manufactured for
"2, 3, 4 or 5" encoded DVD software. The
region code on the labels of some DVD
discs indicates which type of player can
play those discs. This unit can play only
DVD discs labeled "2, 3, 4 or 5". If you try
to play any other discs, the message
"Check Regional Code" will appear on the
TV screen. Some DVD discs may not
have a region code label even though
their playback is prohibited by area limits.
"DTS" and
"DTS
trademarks of
Digital Surround"
Digital Theater System,
are
Inc.
:
a MP3 file CD is burned by wrong method, this set may not
recognize about it. At this time, burn a CD after readjusting a
disc writing area in your PC.
This set cann't play JPEG file.
APPARATUS CLAIMS OF U.S. PATENT
NOS. 4,631,603,4,577,216,4,819,098,
AND 4,907,093 LICENSED FOR LIMITED VIEWING USER ONLY.
27
DVD
Playing
REW
PLAY
FF
SKIP
STOP
SKIP
PAUSE
operation
a
disc
Basic playback
1. Press the POWER button to switch the set on.
2. Press the OPEN/CLOSE button to open the disc tray.
3. Place the disc with the playback side down on the disc tray.
4. Press the OPEN/CLOSE button to close the disc tray.
5. Playback starts.
To pause playback (still mode)
1. Press the PAUSE button during playback.
2. Press the PLAY button again to return to normal
To stop playback
Press the STOP button to stop
playback.
playback.
Note :
a.
To stop playback fully, press the STOP button in twice.
b.
The picture can not go back to DVD mode again but to RF
mode, if you pushed and lost hold of the FF ΓΓ or ΦΦ REW
button of VCR during playing DVD. (Because VCR mode is
prior to DVD mode, display mode is changed to RF mode after
stopping VCR playback.)
c.
When you change chapter in DVD scene menu, sometimes you
can see the volume OSD, because of disc reading time.
d. If you pushed
/ I (POWER) button during playing DVD, disk tray
can be opened by disc condition.
To remove the disc
Press the OPEN/CLOSE button and
remove
the disc after the disc
completely ejected.
Playing in fast reverse or fast forward directions (for DVD,
Video CD and Audio CD)
1. Press the FF ΓΓ or ΦΦ REW button during playback.
2. Each time you press FF ΓΓ or ΦΦ REW button, the playback
speed changes.
3.
REW
PLAY
PAUSE
STOP
SKIP
FF
Press the PLAY button to
resume
normal
playback.
Playing in slow reverse or slow forward directions (for DVD
and Video CD)
1. Press the PAUSE button and then press FF ΓΓ or ΦΦ REW
button.
2. Each time you press FF ΓΓ or ΦΦ REW button, the playback
speed changes.
Note : There is no sound when
in DVD and Video CD.
viewing FAST
or
SLOW playback
a chapter or track
Press the SKIP ΓΓI button Forward or IΦΦ SKIP button Reverse
during playback to locate a chapter that you want to watch.
Each time you press the button, a chapter or track is skipped.
Locating
Note :
If you press the SKIP ΓΓI button Forward or IΦΦ SKIP button
a.
Reverse in the still mode, one frame is displayed at a time.
b. Depending on the disc, this function maybe operate differently.
28
DVD
operation
OSD
(On-screen Display)
display the playback status on TV screen as following;
Title, Chapter number, Playing time. Press the OK button during
playback. Title, Chapter information appears on screen.
Each time you press the OK button, the OSD changes as follows.
You
can
PLAY
DISC MENU
TITLE
2ch
Playing
Load
1.
a
MP3 discs
MP3 disc
MP3
menu
MP3 disc's folder
is
displayed automatically depending
(directory) structure as shown below.
screen
PR
on
VOL
OK
VOL
PR
..
2.
3.
the Δ / Ε button to find the desired folder.
Press the OK button to select.
4.
Using
Using
the Δ / Ε button to find the desired MP3 title.
Press the PLAY button to start playback.
PR
VOL
Selecting
1.
2.
1.
menu
title
:
In
some
PLAY
menu
Press the TITLE button during playback.
Press the Δ / Ε, Φ / Γ, OK or NUMBER buttons to select the
desired item.
Note
VOL
PR
Press the DISC MENU button during playback.
Press the Δ / Ε, Φ / Γ, OK or NUMBER buttons to select the
desired item.
Selecting
2.
disc
disks, you can't select the disc
or
title
DISC MENU
TITLE
menu.
29
DVD
operation
Repeat playback
You
can
play
a
track
specific title, chapter,
or
segment repeatedly.
Press the REPEAT button during playback.
Each time you press the REPEAT button, the repeat mode
as follows.
REPEAT
A-B
DVD : Rep. Off
Rep.
Audio CD : Rep. Track
PROGRAM
MP3
1
2
3
4
5
6
7
8
9
0
PR
Rep. Title
Rep. Random
Chapter
Rep. Disc
Repeat Off
Rep. Track
Rep. Dir
Rep. Disc
Rep. Random
Repeat Off
:
Note
:
A-B
repeat playback
Depending
the disc, repeat playback may not be
on
A-B repeat playback allows you to
selected points.
1.
2.
OK
changes
possible.
repeat material between
two
Press the A-B button to select the start point during playback.
Press the A-B button again to select the end point.
Playback starts at the point that you selected. Playback stops
at the end point, returns to Point A automatically, then starts
PR
again.
Repeatedly press
3.
the A-B button
again
to resume normal
play-
back.
"Rep. Off" appears
Note
:
on
the
It's not available to
use
1
2
3
Programme playback
4
5
6
You
7
8
9
1.
2.
0
can
arrange the order of tracks
Ω Program Menu
Title
PR
this function
on
on
MP3 file.
the disc.
Press the PROGRAM button in the stop mode or during playback.
Press the OK button and then use the Δ / Ε or NUMBER buttons to input the desired Title numbers.
OK
PR
screen.
Ω Program Menu
Title
Chap.
1--
--
2-3--
Track
Chap.
6--
--
1--
--
--
7--
--
2--
--
8--
--
3--
4--
--
9--
--
5--
--
10-
-
--
Track
6--
--
--
7--
--
--
8--
--
4--
--
9--
5--
--
10-
Next:Ε
Play
:
PLAY
Input
:
OK
DVD
3.
REPEAT
A-B
:
SETUP
--
Next:Ε
Play
:
PLAY
Input
:
OK
Exit
:
SETUP
Video Disc / Audio CD
Press the OK button and then use the Δ / Ε or NUMBER butinput the desired Chapter numbers.
To programme others, repeat Step 2 to 3.
Press the PROGRAM button to resume normal playback.
tons to
PROGRAM
4.
Note
a.
b.
30
Exit
--
-
:
on the disc, programme
sible.
It's not available to use this function
Depending
playback may
on
MP3 file.
not be pos-
DVD
the
Selecting
If your
scene was
change
1.
2.
camera
the
camera
operation
angle
recorded from multiple
angle of the scene you
angles, you can easily
are watching.
Press the ANGLE button during playback.
Repeatedly press the ANGLE button to select the desired
ANGLE
angle.
3.
3D
ZOOM
Press the PLAY button to return to normal TV
viewing.
Note :
a.
You
b.
c.
can only change the angle for DVDs that provide multiple
angles of scenes.
The angle function will not work on DVD video discs that do not
contains recorded multiple angles.
The number of angles varies from disc to disc.
PR
3D sound
VOL
To enjoy various surround sounds, when you can select any desired
sound effect by pressing the 3D SOUND button.
1.
2.
OK
VOL
PR
Press the 3D SOUND button during playback.
Each press of the 3D SOUND button changes the sound display as shown below.
Sound fields
Standard
Theater
church
Concert
Picture size
zoom
When enlarging or
unnatural picture.
(for
reducing
Live
Stadium
Amphitheater
Wide
Hall
DVD and Video
the
picture,
the
CD)
OK
may be
screen
display
PR
VOL
VOL
PR
1.
2.
3.
4.
Press the ZOOM button during playback.
Each press of the ZOOM button changes the
DVD:2x
4x
Off
Video CD : 2x
Off
screen
Adjust the main picture position with the Δ / Ε /
in enlarged picture mode.
Repeatedly press the ZOOM button to return
viewing.
display.
Φ / Γ buttons
to normal TV
ANGLE
3D
ZOOM
31
DVD
operation
Selecting
a
audio
language (STOP
mode
only)
Set this value to the preferred audio language. If an audio language
is selected, whenever you start playing a new disc, the selected
audio language is played. (If the selected language is contained in
the disc.)
SETUP
AUDIO
1.
SUBTITLE
2.
Press the SETUP button and then use the Δ / Ε button to
select Audio Language.
Press the Γ button and then Δ / Ε button to select your desired
language.
Audio
Γ
Language
Language
Language
Rating Level
Original
Korean
Subtitle
Menu
English
New Password
German
French
TV Screen
Espanol
OSD
Italiano
Language
Digital Output
Special
Chinese
Japanese
PR
ΔΕ
VOL
OK
:Move
Γ:Next
VOL
3.
4.
PR
Press the OK button.
Press the SETUP button to
resume
You can also select a desired audio
on the Communicator.
Selecting
a
subtitle
normal
language
language (STOP
playback.
with AUDIO button
mode
only)
Set this value to the preferred subtitle language. If a subtitle language is selected, whenever you start playing a new disc, the
selected subtitle language is played. (If the selected language is
contained in the disc.)
OK
1.
PR
VOL
VOL
2.
Press the SETUP button and then use the Δ / Ε button to
select Subtitle Language.
Press the Γ button and then Δ / Ε button to select your desired
language.
PR
Audio
Language
Language
Menu Language
Rating Level
Original
Subtitle
Γ
English
French
German
New Password
TV Screen
Espanol
OSD
Italiano
Language
Digital Output
Special
ΔΕ
3.
4.
SETUP
AUDIO
:Move
Press the OK button.
Press the SETUP button to
Chinese
Japanese
Γ:Next
resume
normal
playback.
SUBTITLE
You can also select a desired subtitle
button on the Communicator.
32
Korean
language
with SUBTITLE
DVD
Disc
menu
language
operation
selection
You can select the language of the disc menu messages of DVDs.
(If the selected language is contained in the disc.)
1.
2.
Press the SETUP button and then use the Δ / Ε button to
select Menu Language.
Press the Γ button and then Δ / Ε button to select your desired
SETUP
language.
Audio
Language
Language
Menu Language
Rating Level
Original
Korean
Subtitle
Γ
English
French
German
New Password
TV Screen
Espanol
OSD
Italiano
Language
Digital Output
Special
ΔΕ
3.
4.
Γ:Next
:Move
Press the OK button.
The menu on screen
displays
guage.
Press the SETUP button to
Parental control
Chinese
Japanese
2.
2
3
4
5
6
7
8
9
will appear in the selected lan-
resume
normal
0
PR
playback.
VOL
setting
OK
VOL
PR
Some discs are specified not suitable for children. Such discs
be prevented from play back with the set.
1.
1
can
Press the SETUP button and then use the Δ / Ε button to
select Rating Level.
Press the Γ button and then use NUMBER buttons to input a 4-
digit password.
Be
sure
to remember this number!
Audio
8 Adult
Language
Language
Menu Language
Rating Level
7NC-17
Subtitle
6R
5PG-R
Γ
New Password
4PG-13
TV Screen
3PG
OSD
2G
Language
Digital Output
Special
ΔΕ
1
Kids
0
Unlock
1
2
3
4
5
6
7
8
9
Γ:Next
:Move
0
3.
Press the Δ / Ε button to select from the level 0 to level 8. The
limitation will be more severe as the level number is upper.
0: Unlock
OK
1: Kids
2: G
(General audience)
(Parental guidance suggested)
PG-13 (13 years and older)
PR
3: PG
4:
VOL
VOL
PR
5: PG-r
6: R
(Restricted)
(18 years and older)
Adult (Adults only)
7: NC-17
8:
4.
Press the SETUP button to
Note : If you forgot your
Communicator.
resume
normal
playback.
password, press '7', '7', '7',
SETUP
'7'
on
the
33
DVD
operation
To
change
1.
Press the SETUP button and then use the Δ / Ε button to
select Rating Level.
Press the Γ button and then use NUMBER buttons to input a 4-
2.
the
password
digit password.
3.
SETUP
Press the Φ button and then
use
the Δ / Ε
button to select
New Password.
Audio
Language
Language
Language
Level
Rating
Subtitle
Menu
New Password
Γ
ΩΩΩΩ
TV Screen
OSD
1
2
3
4
5
6
7
8
9
Language
Digital Output
Special
ΔΕ
4.
PR
5.
VOL
OK
:Move
Γ:Next
0
VOL
6.
Press the Γ button and then enter your new password in 4
Re-enter new password for confirm.
Password change is finished.
Press the SETUP button to resume normal playback.
digits.
PR
TV Screen
You
1.
can
watch TV in various
picture
formats.
Press the SETUP button in twice and then
use
the Δ / Ε but-
ton to select TV Screen.
Audio
Language
Language
Language
Rating Level
Subtitle
Menu
1
2
3
New Password
TV Screen
4
5
6
7
8
9
4:3LB
Γ
4:3PS
OSD
Language
Digital Output
Special
ΔΕ
0
2.
:Move
16:9Wide
Γ:Next
PresstheΓbuttonandthenΔ/Εbuttontoselect4:3LB,
4:3PS,or16:9Wide.
OK
PR
VOL
VOL
PR
Letter Box
3.
4.
(4:3 LB)
Pan & Scan
Press the OK button.
Press the SETUP button to
(4:3 PS)
resume
normal
16:9 Wide
playback.
SETUP
Note
sible.
34
:
Depending
on
the disc, TV
screen
function may not be pos-
DVD
Disc OSD
language
selection
operation
(option)
menu can be displayed on the screen in your desired language. First select your language. (If the selected language is contained in the disc.)
The
1.
2.
Press the SETUP button and then use the Δ / Ε button to
select OSD Language.
Press the Γ button and then Δ / Ε button to select your desired
SETUP
language.
All the
3.
on screen displays will appear in the selected language.
Press the SETUP button to resume normal playback.
Note
:
On
some
models, the OSD Language will not be displayed.
Selecting digital
1.
2.
audio
output
Press the SETUP button and then use the Δ / Ε button to
select Digital Output.
Press the Γ button and then Δ / Ε button to select Bitstream
or PCM.
PR
VOL
OK
VOL
Audio
Language
Subtitle Language
Menu Language
Rating Level
PR
New Password
TV Screen
OSD
Language
Digital Output
Special
ΔΕ
3.
4.
Bitstream
PCM
Γ:Next
:Move
Press the OK button.
Press the SETUP button to
DRC
Γ
resume
normal
playback.
(Dynamic Range Compression)
OK
DRC
(Dynamic Range compression) enables you to control the
dynamic range so as to achieve a suitable sound for your equipment.
1.
Press the SETUP button in twice and then
ton to select
2.
PR
VOL
use
VOL
PR
the Δ / Ε but-
Special.
Press the Γ button and then Δ / Ε button to select DRC Off
DRC Full.
or
Audio
Language
Language
Language
Rating Level
Subtitle
Menu
New Password
TV Screen
OSD
Language
Digital Output
Special
Γ
DRC Off
SETUP
DRC Full
ΔΕ
3.
4.
:Move
Press the OK button.
Press the SETUP button to
Γ:Next
resume
normal
playback.
35
Connection of external
You
can
connect additional
equipment,
such
as
equipment
camcorders, video game set etc. to your set.
Here shown may be somewhat different from your set.
Connecting
antenna
Be careful for the bronze wire not to be bended in
Apartments
(connecting
to wall antenna
connecting
to antenna
input port.
socket)
OUT
VIDEO
DIGITAL AUDIO OUT
(L/MONO)-AUDIO-(R)
IN
wall antenna socket
COAXIAL
<
Back
panel
OPTICAL
of the set
>
or
RF coaxial wire
(75 ohms)
VHF antenna
UHF antenna
1
outdoor antenna
DIGITAL AUDIO OUT
Private house
(connecting to wall outdoor
Watching
COAXIAL
antenna)
cable TV
<
subscribing to a cable TV service from
local provider and installing a converter, you
watch cable TV programming.
After
Press TV/AV button
1.
and select AV1
2.
or
on
panel
of the set
1
OUT
or
Back
VIDEO
can
(L/MONO)-AUDIO-(R)
IN
the Communicator
provided
channels
the cable box.
<
<
>
AV2.
Tune to cable service
using
a
Back
OPTICAL
panel
of the set
Cable box
Watching
>
>
external AV
When
or
OUT
VIDEO
(L/MONO)-AUDIO-(R)
IN
1
connecting
equipments, match
ing ports : Video
white, Audio (Right)
the
source
set
with
external
the colours of connect-
yellow,
=
=
Audio
(Left)
=
red.
1. Press TV/AV button on the Communicator
to select AV1 or AV2.
Camcorder
Video game set
36
R
AUDIO
L
V IDEO
(When connecting with S-Video, select the
S-Video.)
2. Operate the corresponding external
equipment.
(See external equipment operating guide.)
Connection of external
Digital
audio
equipment
output setup
Send the set's audio to external audio
via the
equipment (stereo system)
Optical Output port.
Digital
Audio
DIGITAL AUDIO OUT
How to connect
COAXIAL
OPTICAL
1. Connect
<
Back
panel
of the set
>
an optical cable to
Optical Output port.
2. Connect the other end of the optical
cable to the digital audio optical input on
the audio equipment.
See the external audio equipment instruction manual for operation.
the set
one
Digital
end of
Audio
Note: Do not look into the
port. Looking
optical output
at the laser beam may dam-
age your vision.
Headphone
Insert the
socket
headphone socket of the set.
through the headphone and the TV's speakers. To adjust the headphone volume, press the Φ / Γ button on the
§Volume menu. See the 'Sound adjustment' section.
If you press the MUTE button, only the sound
SSM
Flat
from
the TV's speakers are switched off.
Balance
0
You
can
to the
headphone plug
listen to the sound
AVL
§Volume
On
L+R
30
a
(DUAL I,
ΔΕΦΓOKMENUTV/AV
DUAL II
or DUAL I+II) for the
headphone regardless of
TV's speakers. On the §Volume
sound from the
that from the
button to select the desired
AV2
programme is received in dual
language, you can select a language
When
language; I,
II
or
<
Side
panel
of the set
>
menu, press the I/II
I+II.
At this time if the set is in AV mode, the I/II button selects output sound; L+R, L+L
or
R+R, in turn.
37
Memo
Troubleshooting
check list
Symptoms
No
picture,
no
sound
Sound OK, poor
picture
Picture OK, poor sound
Picture blurred
Lines
or
streaks in
Poor
picture
reception
on some
channels
No colour
Poor colour
Communicator does not work
Check these items and try to
adjust these
The mains plug-(plugged in and
switched on)
Is the TV switched
Try
on
another channel
(weak signal)
Check aerial
(plugged
Check aerial
(broken lead?)
into
TV?)
Check aerial
Check for local interference
Adjust
contrast
Adjust brightness
Adjust
colour
Adjust
volume
Check the batteries in Communicator
Check Audio/Video sockets
(VCR only)
39
P/NO
:
3828VA0477N
(MV033A,
125B/112N
TX)
a