advertisement
▼
Scroll to page 2
of 12
V-CP742NB/ND/NT/NDB/NBB V-CP742RB/RD/RT/RDR/RDN P/No.:3828FI4001W 2 10 18 11 12 1 13 5 3 4 6 19 7 8 7 8 9 2 1 4 3 9 7 65 8 --2-- 11 13 12 10 V-CP742NB/ND/NT/NDB/NBB 17 14 13 15 V-CP742RB/RD/RT/RDR/RDN 20 18 19 22 23 21 --3-- E Information for your the Using safety Nozzles (depending Please read all the Fit the which contains the tube. following information, important instructions for the safety, the use and the maintenance of appliance. This appliance complies with the following Directives: the ? EC -73/23/EEC, 93/68/EEC-Low Never allow children to the use cord is the If the mains lead is replaced by an Service Agent in ? If no a or is be closed. Please do not flammable vacuum substances(liquids Do not vacuum use or hot vacuum ? force! explosive gases). etc. other liquids. hose(2) vacuum To head(1) on into the attachment ? the flexible point on the cleaner, press on the button(3) situated on the head, then pull upwards. ? the in and use the tubes the power level on model) The flexible hose has air flow allows you to handle(14) regulator(15) which a manual reduce the suction level. Storage(17) When you have switched off and unplugged the appliance, press on the button (12) to automatically - You - vertical - plug (depending briefly (depending on model) Metal or plastic tube(4) Fit together the two tubes by twisting slightly. ?Telescopic tube(5) Push spring latch(6) forward. Pull out tube to required length. Release spring latch to lock. - etc. If your appliance is equipped with an electronic variable power control(13), you can choose the power appropriated for the task. vacuum ? Upholstery Nozzle(11) For vacuuming uphostery, mattresses, The thread collectors help to pick up Adjusting the flexible hose from the Assembling objects. supply cord to the desired length and plug into the socket. Press button (13) to start the vacuum cleaner. To stop it press the button (13) again. cleaner. remove uneven Pull out the the flexible hose Push the end of the frames furniture nor How to Use Connecting Dusting brush(10) For vacuuming picture How to or sofa! a threads and fluff. ash, embers water the cannot sharp objects. Do not on Tool(9) vacuuming in those normally inaccessplaces i.e. reaching cobwebs, or down outlines, books and other cover or rug position. Press lift the brush up. or the side of filters. inserted, the floor Crevice ible the dust bag. cleaning the position head(7) is equipped with a pedal(8) which allows you to alter its position according to the type of floor to be For ? dustbag Do not ? cleaner off vaccum head onto the end of The 2 Carpet pedal to hazard. : changing changing ? order to avoid switch the Always before damaged, approved LG Electronics model) brush. supply it must be Accessory position(tiles, parquet floors...). Press on the pedal to lower the appliance If the appliance damaged or faulty. use on large cleaning Hard unsupervised. Do not head and cleaned. Directive-89/336EEC -EMC Directive. Voltage cleaning can rewind the cord. move or store your position by sliding large cleaning head into underside of the appliance. --4-- appliance the hook the clip in a on the on the E Changing the dust The needs dustbag bag changing What to do if your does not work? when the cleaner is set to maximum power and the cleaner head is off the floor but the "bag full" indicator window is (18) completely Check that the coloured red. appliance in and that the electrical Even if the full at this ? ? stage, great deal of very fine dust up the pores of the dust clogged Turn off the Open the and lifting a appliance cover and unplug by pressing bag. it. the hook it up until it snaps into place. Stop ? Check that the cleaning ? Take hold of the dust bag by the handle pull.Remove the bag and throw it away. ? To refit a new support of (21) a bag push the new bag into until it will go no cardboard the bag mount further. If your appliance is fitted with a fabric dust bag follow the same instructions as above. Empty Note: it and the replace it appliance (22). is fitted with safety device which checks that the bag is in place you cannot close the lid if the bag is not fitted correctly. as a the motor filter Cleaning The motor filter is situated inside the appliance between the dust motor. Each time that you outlet filter bag and the change the air advise you to remove the motor filter(23)and to clean it by tapping to remover vacuum we the dirt and then replacing the ? (19) appliance is equipped with either a paper dust bag (20) or a fabric dust bag (22) (depending on model). and correctly plugged socket is working. What to do when the suction performance reduces? Your ? is dustbag It could be that has does not appear to be it should be changed. appliance it in the cleaner. --5-- appliance tool are and it. tubes, flexible hose and not blocked. Check that the dust if necessary. unplug bag is not full.Replace MEMO --6-- MEMO --6-- --4-- 11 13 12 10 V-CP742NB/ND/NT/NDB/NBB 17 14 13 15 V-CP742RB/RD/RT/RDR/RDN 20 18 19 22 23 21 --3-- 2 10 18 11 12 1 13 5 3 4 6 19 7 8 7 8 9 2 1 4 3 9 7 65 8 --2-- V-CP742NB/ND/NT/NDB/NBB V-CP742RB/RD/RT/RDR/RDN P/No.:3828FI4001W
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement