Panasonic TB25 24時間式1回路型, 24時間式2回路型, 週間式1回路型, 週間式2回路型, TB28 高容量24時間式1回路型, 高容量週間式1回路型 ソーラー式タイムスイッチ 取扱説明書

PDF
Document
Panasonic TB25 24時間式1回路型, 24時間式2回路型, 週間式1回路型, 週間式2回路型, TB28 高容量24時間式1回路型, 高容量週間式1回路型 ソーラー式タイムスイッチ 取扱説明書 | Manualzz

Advertisement

Advertisement

/

Advertisement

User questions

O L

Michael O.

How to manually turn the time switch ON and OFF?

No votes

Manual ON/OFF operation is performed using the '入ー自動ー切' (ON-AUTO-OFF) switch located on the surface: 1. 入 (ON) position: Continuous ON, overriding the program. 2. 切 (OFF) position: Continuous OFF, overriding the program. 3. 自動 (AUTO) position: Operates according to the scheduled program. For momentary operation (temporary ON/OFF), move the switch to '入' then return it to '自動' (it stays ON until the next scheduled OFF time), or move it to '切' then return it to '自動' (it stays OFF until the next scheduled ON time).

B P

Jennifer B.

Which regional sunrise/sunset time data is stored in the TB25/28 series time switch?

No votes

The TB25/28 series time switch has basic sunrise and sunset times for 12 regions (including Hokkaido East/West, Tohoku, Kanto, Kinki, etc.) stored in the microcomputer. These times are automatically adjusted throughout the year based on the selected region. For example, the representative sunrise time on January 1st in Kanto is 6:50.

M W

James M.

What is the specialized function of the solar feature on the TB25/28 series time switch?

No votes

The solar feature stores the basic sunrise and sunset times for 12 regions in the microcomputer. By selecting a region, the device automatically adjusts the sunrise and sunset times throughout the year.

Y U

Robert Y.

How to perform a forced lighting test and verify if the sensor is functioning correctly?

No votes

Use the 'On-Auto-Off' switch: setting it to 'On' forces continuous lighting regardless of the program. To verify sensor operation, check the wiring against the manual, use the manual switch to confirm the output lamp lights up, and use the monitor function to simulate programmed movements.

M T

Robert M.

How to change the fixed ON and OFF times for the device's output?

No votes

To change the fixed ON time and fixed OFF time, follow these steps:

  1. Press the mode button until the ▲ mark is aligned with "Output 1 (or Output 2)".
  2. Select action pattern 5 using the pattern button.
  3. Press the set button.
  4. Set the desired ON time using the hour and minute buttons, then press set.
  5. Set the desired OFF time using the hour and minute buttons, then press set.
  6. To complete the process, press the mode button to return the ▲ mark to the "Normal" position.
B X

Linda B.

How to set the timer?

No votes

Timer settings depend on the device's operating pattern. First, select the operating pattern (there are 5). For a 2-circuit model, you can select the pattern for each circuit. The setting procedure differs depending on the selected operating pattern:

  • Operating Pattern 1: ON at sunset - OFF at sunrise
  • Operating Pattern 2: ON at sunset - OFF at a fixed time
  • Operating Pattern 3: ON at a fixed time - OFF at sunrise
  • Operating Pattern 4: ON at sunset - OFF at a fixed time, ON at a fixed time - OFF at sunrise
  • Operating Pattern 5: ON at a fixed time - OFF at a fixed time
X K

Jennifer X.

How to set the clock on the device?

No votes

To set the clock: 1. Press the Mode button until the ▲ mark is aligned with 'Clock/Region'. 2. Use the Year/Month and Day buttons to set the date, then press the Set button. 3. Press the 0 Second button to synchronize the seconds (the clock starts when you release it). 4. Use the Hour and Minute buttons to set the time and press the Set button. 5. Select the region number using the Region button and press the Set button. 6. After completing the settings, press the Mode button to return the ▲ mark to the 'Normal' position.

C N

James C.

What is the procedure for adjusting the device clock?

No votes

Adjust the clock by using the [Mode] button to navigate to [Clock/Region]. Set the date using the [Year/Month] and [Day] buttons, and the time (24-hour format) using the [Hour] and [Minute] buttons. Select the region number using the [Region] button, pressing [Set] after each input, and finally return to the [Normal] position using the [Mode] button.

W C

Michael W.

How can I check the current timer settings and the set OFF/extinction time?

No votes

To check the timer settings (program content, including the set OFF time), follow these steps: 1. Use the mode button to align the ▲ mark on the LCD display with "Output 1 (or Output 2)". The "Operation Pattern" will flash. 2. Press the setting button repeatedly to sequentially display the set program details (operation pattern, operating days, sunset/sunrise adjustment times, fixed ON/OFF times, etc.). 3. Once confirmation is complete, use the mode button to return the ▲ mark to the "Normal" position.

Preparing document for printing…
0%