advertisement
▼
Scroll to page 2
of 64
BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 1 COLOUR TELEVISION SP43Q1/47Q1 SP43T8/54T8 SP43W6 Owner’s Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. PICTURE IN PICTURE (PIP) TELETEXT SELF FOCUS BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 2 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 3 Important Warranty Information Regarding Television Format Viewing Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily designed to view standard format full-motion video. The images displayed on them should primarily be in the standard 4:3 ratio format and constantly moving. Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars (wide screen pictures), should be limited to no more than 15% of the total television viewing per week. Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature, and constantly moving. Displaying stationary graphics and images on screen, such as the dark side-bars on non-expanded standard format television video and programming, should be limited to no more than 15% of the total television viewing per week. Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites or computer graphics and patterns, should be limited as described above for all televisions. Displaying any stationary images that exceed the above guidelines can cause uneven aging of picture tubes (CRTs) that leave subtle, but permanent burned-in ghost images in the television picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary patterns or dark bars. On television models that offer picture sizing features, use these controls to view the different formats as a full screen picture. B e careful in the selection and duration of television formats used for viewing. Uneven CRT aging as a result of format selection and use, as well as other burned-in images, is not covered by your Samsung limited warranty. English - 3 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 4 Contents ◆ FOREWORD ■ Important Warranty Information Regarding Television Format Viewing ........ 3 ◆ CONNECTING AND PREPARING YOUR TELEVISION ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Control Panels (depending on the model) ..................................................... 6 Connection Panels (depending on the model) .............................................. 7 Using a Display Deck (depending on the model) .......................................... 8 Infrared Remote Control ................................................................................ 9 Inserting the Batteries in the Remote Control................................................ 10 Connecting to an Aerial or Cable Television Network ................................... 10 Connecting a Satellite Receiver or Decoder.................................................. 11 Switching Your Television On and Off........................................................... 12 Placing Your Television in Standby Mode ..................................................... 12 Becoming Familiar with the Remote Control ................................................. 13 Plug & Play Feature....................................................................................... 14~15 Displaying Information ................................................................................... 15 Choosing Your Language.............................................................................. 16 Adjusting the Screen Automatically (Self Focus)........................................... 17 Deactivating the Automatic Execution of the Self Focus .............................. 18 Removing the “Self Focus” from the Display ................................................. 19 ◆ SETTING THE CHANNELS ■ ■ ■ ■ ■ ■ ■ Storing Channels Automatically..................................................................... 20 Sorting the Stored Channels ......................................................................... 21 Storing Channels Manually............................................................................ 22~23 Skipping Unwanted Channels ....................................................................... 24 Assigning Names to Channels ...................................................................... 25 Locking the Channel...................................................................................... 26 Fine Tuning Channel Reception .................................................................... 27 ◆ USING YOUR TELEVISION ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Viewing the Channel Scan Picture ................................................................ 28 Using the LNA (Low Noise Amplifier) Feature............................................... 28 Changing the Picture Standard ..................................................................... 29 Customizing the Picture Settings................................................................... 30 Selecting the Picture Size (4:3 Model) .......................................................... 31 Selecting the Picture Size (Wide Model) ....................................................... 32~33 Selecting the Scan Mode............................................................................... 34 Using the Digital NR (Digital Noise Reduction) Feature ................................ 35 Freezing the Current Picture ......................................................................... 35 DNIeTM (Digital Natural Image engine) ............................................... 36 English - 4 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 5 Contents (continued) ◆ USING YOUR TELEVISION (continued) ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Setting the Blue Screen Mode....................................................................... 37 Viewing the Picture In Picture (PIP) .............................................................. 38~39 Changing the Sound Standard ...................................................................... 40 Adjusting the Sound Settings ........................................................................ 41 Adjusting the Volume Automatically .............................................................. 41 Setting the External Sound............................................................................ 42 Setting the SRS TSXT................................................................................... 43 Setting the Melody Sound ............................................................................. 44 Selecting the Sound Mode (depending on the model) .................................. 45 Setting and Displaying the Current Time....................................................... 46 Setting the Sleep Timer ................................................................................. 47 Switching the Television On and Off Automatically ....................................... 48 Viewing an External Signal Source ............................................................... 49 ◆ USING THE TELETEXT FEATURE ■ ■ ■ ■ ■ Teletext Feature ............................................................................................ Displaying the Teletext Information ............................................................... Selecting Display Options.............................................................................. Selecting a Teletext Page (depending on the model).................................... Storing Teletext Pages .................................................................................. 50 51 52 53 54 ◆ ADDITIONAL INFORMATION AND CONNECTIONS ■ ■ ■ ■ ■ ■ Connecting to the External Input/Outputs...................................................... Connecting to the Audio Output .................................................................... Connecting to the RCA Input ........................................................................ Connecting to the S-Video Input ................................................................... Connecting to the Component Input.............................................................. Redirecting an Input to the External Output .................................................. 55 56 56 57 57 58 ◆ RECOMMENDATIONS FOR USE ■ ■ Programming the Remote Control for Other Components ............................ 59~61 - VCR Remote Control Codes ...................................................................... 60 - Cable Box (CATV) Remote Control Codes ................................................ 61 - DVD Remote Control Codes ...................................................................... 61 Troubleshooting: Before Contacting Service Personnel................................ 62 Symbols Press ☛ Important ➢ Note English - 5 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 6 Control Panels (depending on the model) ➢ ( a ) Switch among video input modes ( e ) Select the channels ( b ) Display the on-screen menu (f) ( c ) Access to the selected option on the menu system ( g ) Standby & Timer Indicator ( d ) Adjust the volume ➢ The actual configuration on your TV may be different, depending on your model. Remote control sensor ( h ) Switch the TV on and off (i) Place the TV in standby mode ◆ You can use the C/P. buttons to switch on the TV when it is in standby mode depending on the model. ◆ The + and C/P. buttons have the same function as the ▲/▼/œ/√ buttons on the remote control. ◆ If the remote control no longer works or your have lost it, you can use controls on the panel of the TV. English - 6 . BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 7 Connection Panels (depending on the model) ➢ The actual configuration on your TV may be different, depending on your model. Side of the TV Video Input Video Input Audio Input Audio Input S-Video Input S-Video Input Rear of the TV 75Ω Coaxial Connector for Aerial or Cable Network Component Input Audio Output SCART Audio/Video Input/Output ➢ ☛ For further details about connection, refer to pages 55~57. Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions. English - 7 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 8 Using a Display Deck (depending on the model) You can display a VCR or DVD Player, etc. by using the display deck. SP54T8 SP54T8 SP43W6 SP43Q1/47Q1 English - 8 1 Hold the center of the door and lift it up in the direction of arrow. 2 After placing a component you have in the display deck, hold the center of the door and pull it down. ➢ You should display only the component that is within 126mm high. When displaying a component in the display deck, please space it out 30mm from the front, 20mm from either end. BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 9 Infrared Remote Control TELEVISION STANDBY WHEN YOU PRESS A BUTTON , ‘ ’ APPEARS ALONG WITH SELECTED MODE (TV, VCR, CATV, DVD OR STB) AND REMAINING BATTERIES ON LCD PICTURE SIZE/ TELETEXT SIZE SELECTION TUNER/CABLE NETWORK SELECTION MAKE THE REMOTE CONTROL WORKS FOR TV, VCR, CATV, DVD PLAYER, STB DIRECT CHANNEL SELECTION ONE, TWO, OR THREE-DIGIT CHANNEL SELECTION/ TELETEXT STORE (NOT AVAILABLE) VOLUME INCREASE TEMPORARY SOUND SWITCH-OFF VOLUME DECREASE SWITCH REPEATEDLY BETWEEN THE LAST TWO CHANNELS DISPLAYED NEXT CHANNEL/ TELETEXT NEXT PAGE EXTERNAL INPUT SELECTION/ TELETEXT MODE (LIST/FLOF) SELECTION (NOT AVAILABLE) PREVIOUS CHANNEL/ TELETEXT PREVIOUS PAGE TELETEXT DISPLAY/ MIX BOTH TELETEXT INFORMATION AND THE NORMAL BROADCAST MENU DISPLAY/ TELETEXT INDEX INFORMATION DISPLAY/ TELETEXT REVEAL EXIT FROM ANY DISPLAY CONTROL THE CURSOR IN THE ON-SCREEN MENU SOUND EFFECT SELECTION SRS TruSurround XT MODE SELECTION FASTEXT TOPIC SELECTION SELF FOCUS AUTOMATIC SWITCH-OFF DNIe ON/OFF/DEMO TELETEXT SUB-PAGE CONFIRM YOUR CHOICE (STORE OR ENTER) PICTURE EFFECT SELECTION SOUND MODE SELECTION PICTURE FREEZE PIP FUNCTIONS; - PIP ACTIVATING OR DEACTIVATING (PIP ON) - SWAPPING THE MAIN AND THE SUB PICTURE (SWAP) - SELECTING THE CHANNEL OF SUB PICTURE (P / ) REMOTE CONTROL SETUP TELETEXT CANCEL IF YOUR REMOTE CONTROL IS NOT FUNCTIONING PROPERLY, TAKE OUT THE BATTERIES AND PRESS THE RESET BUTTON FOR ABOUT 2~3 SECONDS. RE-INSERT THE BATTERIES AND TRY USING THE REMOTE CONTROL AGAIN. ➢ VCR/DVD FUNCTIONS; - REWIND ( ) - STOP ( ) - PLAY/PAUSE ( ) - FAST FORWARD ( ) TELETEXT PAGE HOLD The performance of the remote control may be affected by bright light. English - 9 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 10 Inserting the Batteries in the Remote Control You must insert or replace the batteries in the remote control when you: ◆ Purchase the television ◆ Find that the remote control is no longer operating correctly 1 Remove the cover on the rear of the remote control by pressing the symbol ( ) downwards and then pulling firmly to remove it. 2 Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities: ◆ - on the battery against - on the remote control ◆ + on the battery against + on the remote control 3 Replace the cover by aligning it with the base of the remote control and pressing it back into place. Connecting to an Aerial or Cable Television Network To view television channels correctly, a signal must be received by the set from one of the following sources: ◆ An outdoor aerial ◆ A cable television network ◆ A satellite network 1 In the first three cases, connect the aerial or network input cable to the 75Ω coaxial socket on the rear of the television. 2 If you are using an indoor aerial, you may need to turn it when tuning your television until you obtain a picture that is both sharp and clear. For further details, refer to: ◆ “Storing Channels Automatically” on page 20. ◆ “Storing Channels Manually” on page 22. Rear of the TV or Cable Television Network English - 10 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 11 Connecting a Satellite Receiver or Decoder In order to watch television programmes broadcast via a satellite network, you must connect a satellite receiver to the rear of TV. Also, in order to descramble a coded transmission signal, you must connect a decoder to the rear of TV. Rear of the TV ◆ Using a SCART cable Connect the receiver (or decoder) SCART cable to one of the SCART connectors on the rear of the television. ◆ Using a coaxial cable Connect a coaxial cable to the: - Receiver (or Decoder) output socket. - Television aerial input socket. ➢ If you wish to connect both a satellite receiver (or decoder) and a VCR, you should connect the: ◆ Receiver (or Decoder) to the VCR ◆ VCR to the television Satellite receiver/ Decoder Otherwise, connect the receiver (or decoder) directly to the television. English - 11 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 12 Switching Your Television On and Off The mains lead is attached to the rear of your television. 1 Plug the mains lead into an appropriate socket. ➢ TV 2 The main voltage is indicated on the rear of the television and the frequency is 50 or 60Hz. Press the “ I ” button (On/Off) on the front or side of the television. Result: 3 The Standby indicator on the front of the television lights up. Press the POWER ( television on. Result: ➢ ) button on the remote control to switch the The programme that you were watching last is reselected automatically. ◆ If your television isn’t turned on when the POWER ( ) button is pressed, press the SELECT button to check if the “ TV ” mode has been chosen. ◆ If you have not yet stored any channels, No clear picture appears. Refer to “Storing Channels Automatically” on page 20 or “Storing Channels Manually” on page 22. 4 To switch your television off, press the “ I ” button (On/Off) again. Placing Your Television in Standby Mode Your television can be placed in Standby mode, in order to reduce the power consumption. TV The Standby mode can be useful when you wish to interrupt viewing temporarily (during a meal, for example). 1 Press the POWER ( Result: 2 The screen is turned off and the Standby indicator on the front of the television lights up. To switch the television back on, simply press the POWER ( button again or a numeric button. ➢ ☛ English - 12 ) button on the remote control. You can also switch on by pressing the TV ( button. ) or P ) / Do not leave your television in Standby mode for long periods of time (when you are away on holiday, for example). Turn your television off by pressing the “ I ” button (On/Off) on the front or side of the television. It is best to unplug the set from the mains and aerial. BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 13 Becoming Familiar with the Remote Control The remote control is used mainly to: ◆ Change channels and adjust the volume ◆ Set up the television using the on-screen menu system The following table presents the most frequently used buttons and their functions. Button to Viewing Function Menu Function Used to display the next stored channel. - Used to display the previous stored channel. - Used to display the corresponding channels. For double digit channels, the second digit must be pushed immediately after the first. Failure to do this will result in a single digit channel being displayed. ➢ -/--/--- Used to select a channel numbered ten or over. Press this button, and the “--” or “---” symbol is displayed. Enter the two or three-digit channel number. PRE-CH ( ) Press the PRE-CH button. The TV will switch to the last channel viewed. To quickly switch between two channels that are far apart, tune to one channel, then use the numeric buttons to select second channel. Then, use the PRE-CH button to quickly alternate between them. Used to increase the volume. - Used to decrease the volume. - MUTE ( ) Used to switch the sound off temporarily. To turn the sound back on, press this button again, or press the or button. MENU ( ) Used to display the on-screen menu system. Used to return to the previous menu or normal viewing. - Used to: ◆ Display a submenu containing selections for the current menu option ◆ Increase/decrease a menu option value - Used to confirm your choice. TV ( ) EXIT ( ) ➢ Used to switch the television on when it is in Standby mode. - Used to exit from the menu system and return to normal viewing directly Used to exit from the any display. English - 13 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 14 Plug & Play Feature When the television is initially powered ON, several basic customer settings proceed automatically and subsequently. The following settings are available. Plug & Play Start Plug & Play OK Enter 1 Return If the television is in Standby mode, press the POWER ( on the remote control. Result: Plug & Play 2 Language The message Start Plug & Play is displayed. To start the Plug & Play, press the ENTER ( Result: English ) button ) button. The Language menu is displayed. ългарски Hrvatski Čeština Nederlands Français 3 Result: † Move Enter Skip 4 Plug & Play 5 OK Skip The Country menu is displayed. Select your country by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm your choice. Result: 6 The message Check antenna input. is displayed. Make sure that the antenna is connected to the TV, and then press the ENTER ( ) button. Result: Check antenna input. Enter Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm the language. The Search menu is displayed. To start the channel store, press the ENTER ( ) button. Plug & Play Result: Country Belgium Germany Spain France Italy Netherlands ➢ † Move Enter Skip 7 Start Enter Skip Plug & Play Hour Minute -- -- œ √ Move Enter Adjust Skip Plug & Play Enjoy your watching. OK English - 14 To stop the search before it has finished or return to normal viewing, press the MENU ( ) button. Press the œ or √ button to move to the Hour or Minute. Set these by pressing the ▲ or ▼ button. ➢ Search The search will end automatically. Channels are sorted and stored in an order which reflects their position in the frequency range (with lowest first and highest last). When it has finished, the Clock menu is displayed. You can also set the Hour and Minute by pressing the numeric buttons directly. 8 Press the ENTER ( 9 When the setting has finished all, the message Enjoy your watching. is displayed, and then the channel which has been stored will be activated. ) button. BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 15 Plug & Play Feature (continued) If you want to reset this feature... TV 1 Press the MENU ( Result: 2 √ Time √ Plug & Play The main menu is displayed. Language : English √ √ Press the ▲ or ▼ button until the Setup is selected. Self Focus Blue Screen : Off √ Result: Melody : On √ The options available in the Setup group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Plug & Play option is selected. Press the ENTER ( ) button. Result: 5 Setup ) button. ) button. ▼ More Move Enter This feature starts with the message Start Plug & Play is displayed. For further details on how to set, refer to the opposite page. Displaying Information You can view the channel information and setting status you select by pressing the “INFO ( )” button on the remote control. P 1 Mono Picture Sound 12 : 02 : : Dynamic Standard English - 15 Return BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 16 Choosing Your Language TV Setup √ Time √ Plug & Play Language √ : English Blue Screen : Off √ Melody : On √ Press the MENU ( Result: 2 ▼ More Enter TV ) button. Press the ▲ or ▼ button until the Setup is selected. Result: Return The main menu is displayed. The options available in the Setup group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Language is selected. Press the ENTER ( ) button. ) button. Setup English Time Language Self Focus Blue Screen Melody ▼ More √ ългарски √ Plug & Play Move 1 √ Self Focus Move When you start using your television for the first time, you must select the language which will be used for displaying menus and indications. Hrvatski √ : English Čeština √ Nederlands √ : Off Français √ : On Deutsch † Enter English - 16 Return Result: 5 The languages available are listed. Select the appropriate language by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm your choice. BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 17 Adjusting the Screen Automatically (Self Focus) The “Self Focus” feature automatically finds the optimum picture quality when blurring, overlapping colours or incorrect focus occurs. These conditions may be caused by moving your TV. TV Setup √ Time √ Plug & Play 1 Press the MENU ( Result: 2 ) button. Language The main menu is displayed. The options available in the Setup group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Self Focus is selected. Press the ENTER ( ) button. Blue Screen : Off √ Melody : On √ ▼ More Move Enter 5 Result: ➢ ➢ Self Focus √ Self Focus The Self Focus is selected. Press the ENTER ( Return ) button. TV Result: √ Self Focus Press the ▲ or ▼ button until the Setup is selected. Result: √ : English Auto : On √ Message Display : On √ ) button again The self focus process begins with the message Self Focus and horizontal bar is displayed. During the process, minor distortions of the picture may occur. At this time, the colors may diffuse and a searching action will appear on the edges of the screen. This is a normal part of the adjustment. When it is finished, all of things will disappear and the optimum picture quality can be enjoyed. Move Enter Return Self Focus You can also set these options simply by pressing the SELF FOCUS button. ◆ Changing channels and any other signal changes will pause the self focus until a stable signal has returned. It resumes after the signal has been stabilised. This feature will not work without a signal. ◆ Ambient light that is too bright may affect the self focus. If this occurs, darken the environment and try again. English - 17 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 18 Deactivating the Automatic Execution of the Self Focus TV Setup √ Time √ Plug & Play Language : English √ The “Self Focus” feature starts on default. It will automatically begin 10 minutes after switching on the power and the appearance of the screen image. To set the optimum picture quality, the “Self Focus” will automatically begin again after another 30 minutes, as the screen image is then fully stabilised. √ Self Focus Blue Screen : Off √ Melody : On √ 1 Result: ▼ More Move Enter Return Press the 2 Self Focus √ Self Focus Auto : On √ Message Display : On √ Enter TV Self Focus √ Self Focus Message Display : On Off √ : On On √ Enter Return Auto Move Return English - 18 The main menu is displayed. The options available in the Setup group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Self Focus is selected. Press the ENTER ( ) button. Result: Move ) button. Press the ▲ or ▼ button until the Setup is selected. Result: TV Press the MENU ( ) button. The options available in the Self Focus group are displayed. 5 Press the ▲ or ▼ button until the Auto is selected. Press the ENTER ( ) button. 6 To turn off the automatic execution of the self focus feature, select Off by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 19 Removing the “Self Focus” from the Display 1 Press the MENU ( Result: 2 ) button. TV The main menu is displayed. Press the ENTER ( 4 Press the ▲ or ▼ button until the Self Focus is selected. Press the ENTER ( ) button. Result: 5 Press the ▲ or ▼ button until the Message Display is selected. Press the ENTER ( ) button. 6 To remove the message Self Focus and horizontal bar on the screen during the self focus process, select Off by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. : English √ √ Self Focus ) button. The options available in the Self Focus group are displayed. √ Language The options available in the Setup group are displayed. 3 √ Plug & Play Press the ▲ or ▼ button until the Setup is selected. Result: Setup Time Blue Screen : Off √ Melody : On √ ▼ More Move Enter TV Return Self Focus √ Self Focus Auto : On √ Message Display : On √ Move Enter TV Return Self Focus √ Self Focus Move √ Auto : On Message Display : On Off √ On Enter Return English - 19 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 20 Storing Channels Automatically TV Channel Auto Store √ Manual Store √ Add/Delete √ Sort √ Name √ Child Lock √ You can scan for the frequency ranges available to you, (availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers. However you can sort numbers manually and clear any channels you do not wish to watch. 1 Press the MENU ( ) button. Result: The main menu is displayed. 2 Press the ▲ or ▼ button until the Channel is selected. Result: The options available in the Channel group are displayed. 3 Press the ENTER ( ) button. Result: The Auto Store is selected. 4 Press the ENTER ( ) button again. Result: The Auto Store menu is displayed with Country option selected. 5 Press the ENTER ( ) button once again. Select your country by pressing the ▲ or ▼ button. The countries are displayed in the following order: Belgium - Germany - Spain - France - Italy - Netherlands Switzerland - Sweden - United Kingdom - Eastern Europe Others. ➢ If you have selected the Others option but do not wish to scan the PAL frequency range, store the channels manually (see page 22). 6 Press the ENTER ( 7 Press the ▲ or ▼ button until the Search is selected. Press the ENTER ( ) button. 8 Press the ENTER ( ) button to start the search. Result: The search will end automatically. Channels are sorted and stored in an order which reflects their position in the frequency range, (with lowest first and highest last). The programme originally selected is then displayed. To stop the search before it has finished or return to normal viewing, press the MENU ( ) button. ▼ More Move Enter TV Return Auto Store Country : Off Belgium Germany Spain France Italy Netherlands Search ▼ Move Enter TV Return Auto Store Country : Belgium √ √ Search Move Enter Return Search Start Enter ➢ Return Search 9 When searching and storing are complete, the Sort menu is displayed. ◆ To sort the stored channels into the desired numerical order, go to Step 5 of the “Sorting the Stored Channels” procedure on page 21. ◆ To exit from the channel store function without sorting the channels, press the MENU ( ) button repeatedly until the menus disappear. 10 When the channels have been stored, you can: ◆ Sort them in the order required (see page 21) ◆ Assign a name to the stored channels (refer to page 25) ◆ Clear a channel (see page 24) ◆ Fine-tune channel reception if necessary (see page 27) ◆ Activate/deactivate the LNA (Low Noise Amplifier) feature (see page 28) ◆ Activate/deactivate the Digital NR (Digital Noise Reduction) feature (see page 35) P 1 C ------ 65 MHz Stop Enter Return TV Sort Prog. Move 1 C- - ----- 2 C- - ----- 3 C- - ----- 4 C- - ----- 5 C- - ----- Enter English - 20 ) button to confirm your choice Return BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 21 Sorting the Stored Channels This operation allows you to change the programme numbers of stored channels. This operation may be necessary after using the auto store. You can delete those channels you do not want to keep. 1 Press the MENU ( Result: 2 ) button. The main menu is displayed. The options available in the Channel group are displayed. Press the ENTER ( ) button. Channel Auto Store √ Manual Store √ Add/Delete √ Sort √ Name √ Child Lock √ ▼ More Press the ▲ or ▼ button until the Channel is selected. Result: 3 TV Move Enter TV Return Sort Prog. 4 Press the ▲ or ▼ button until the Sort is selected. Press the ENTER ( ) button. Result: 5 6 Select the channel that you wish to move by pressing the ▲ or ▼ button. Press the ENTER ( ) button. Select the number of the programme to which the channel is to be moved by pressing the ▲ or ▼ button. Press the ENTER ( ) button. Result: 7 The Sort menu is displayed. 1 C- - ----- 2 C- - ----- 3 C- - ----- 4 C- - ----- 5 C- - ----- Move Enter TV Return Sort Prog. The channel is moved to its new position and all other channels are shifted accordingly. Repeat Steps 5 to 6 until you have moved all the channels to the required programme numbers. Move 1 C- - ----- 2 C- - ----- 3 C- - ----- 4 C- - ----- 5 C- - ----- Enter English - 21 C 1 ----- Return BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 22 Storing Channels Manually TV You can store the television channels, including those received via cable networks. Channel Auto Store √ Manual Store √ Add/Delete √ Sort √ Name √ Child Lock √ When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found ◆ The programme number of each stored channel which you wish to identify ▼ More Move Enter TV Return 1 Result: Manual Store 2 Prog. Move 1 C- - - - - - - AUTO BG 2 C- - - - - - - AUTO BG 3 C- - - - - - - AUTO BG 4 C- - - - - - - AUTO BG 5 C- - - - - - - AUTO BG Enter Press the MENU ( Return ) button. The main menu is displayed. Press the ▲ or ▼ button until the Channel is selected. Result: The options available in the Channel group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Manual Store is selected. Press the ENTER ( ) button. Result: ) button. The current channels are displayed. Manual Store Prog. Colour System Sound System 1 AUTO BG Channel Search Store C- - 83MHz ? œ √ Move Adjust 5 Result: To assign a programme number to a channel, find the correct number by pressing the ▲ or ▼ button. 7 If necessary, select the broadcasting standard required. Press the œ or √ button until the Colour System is selected and press the ▲ or ▼ button. The colour standards are displayed in the following order. Return Prog. Colour System Sound System 1 AUTO BG Channel Search Store C- - 83MHz ? Adjust Return Manual Store Prog. Colour System Sound System 1 AUTO BG Channel Search Store C- - 83MHz ? œ √ Move Adjust English - 22 The Prog. is selected. 6 Manual Store œ √ Move Select the channel that you wish to move by pressing the ▲ or ▼ button. Press the ENTER ( ) button. Return AUTO - PAL - SECAM - NT4.43 8 Press the œ or √ button until the Sound System is selected and press the ▲ or ▼ button. The sound standards are displayed in the following order. BG - DK - I - L BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 23 Storing Channels Manually (continued) 9 If you know the number of the channel to be stored, see the following steps. ◆ Press the œ or √ button until the Channel is selected. ◆ Press the ▲ or ▼ button to select C (Air channel) or S (Cable channel). ◆ Press the √ button ◆ Press the ▲ or ▼ button to select the required number. ➢ 10 Manual Store Prog. Result: The tuner scans the frequency range until the first channel or the channel that you selected is received on your screen. 1 AUTO BG Search Store C- - 83MHz ? œ √ Move 12 Prog. ☛ Channel mode ◆ P (Programme mode): When completing tuning, the broadcasting stations in your area have been assigned to position numbers from P00 to max P99. You can select a channel by entering the position number in this mode. ◆ C (Real channel mode): You can select a channel by entering the assigned number to each air broadcasting station in this mode. ◆ S (Cable channel mode): You can select a channel by entering the assigned number for each cable channel in this mode. Return Colour System Sound System 1 AUTO BG Channel Search Store C- - 83MHz ? To store the channel and associated programme number, select Store by pressing the œ or √ button. Set to OK by pressing the ENTER ( ) button. Repeat Steps 9 to 11 for each channel to be stored. Adjust Manual Store œ √ Move 11 Sound System Channel If no sound or abnormal sound can be heard, re-select the sound standard required. If you do not know the channel numbers, select the Search by pressing the œ or √ button. Press the ▲ or ▼ button to start the search. Colour System Adjust Return Manual Store Prog. Colour System Sound System 1 AUTO BG Channel Search Store C- - 83MHz ? œ √ Move Adjust Return Manual Store Prog. Colour System Sound System 1 AUTO BG Channel Search Store C- - 83MHz OK œ √ Move Enter English - 23 Return BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 24 Skipping Unwanted Channels TV Channel Auto Store √ Manual Store √ Add/Delete √ Sort √ Name √ Child Lock √ You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those that you have chosen to skip are thus not displayed. All channels that you do not specifically choose to skip are displayed during scanning. 1 Result: ▼ More Move Press the MENU ( Enter Return 2 Result: 1 In Memory < > Change Enter Return Press the ENTER ( 4 Press the ▲ or ▼ button until the Add/Delete is selected. Press the ENTER ( ) button. Result: Add/Delete P 1 Not in Memory < > Change Enter English - 24 Return ) button. The Add/Delete menu is displayed with the current channel selected. 5 Press the P or Press the ENTER ( 6 Repeat Step 5 for each channel to be erased or added. Add P The options available in the Channel group are displayed. 3 Delete P The main menu is displayed. Press the ▲ or ▼ button until the Channel is selected. Add/Delete P ) button. button to delete or add the required channel. ) button. BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 25 Assigning Names to Channels Channel names will be assigned automatically when channel information is broadcast. These names can be changed, allowing you to assign new names. 1 Press the MENU ( Result: 2 4 7 The options available in the Channel group are displayed. ) button. √ Manual Store √ Add/Delete √ Sort √ Name √ Child Lock √ Move Enter TV Return Name Prog. The Name menu is displayed with the current channel selected. If necessary, select the channel to be assigned a new name by pressing the ▲ or ▼ button. Press the ENTER ( ) button. Channel Auto Store ▼ More Press the ▲ or ▼ button until the Name is selected. Press the ENTER ( ) button. Result: 6 The main menu is displayed. Press the ENTER ( Result: 5 ) button. Press the ▲ or ▼ button until the Channel is selected. Result: 3 TV Name 1 C- - ----- 2 C- - ----- 3 C- - ----- 4 C- - ----- 5 C- - ----- Move Enter Return Arrow indications are displayed around the name box. Press the ▲ or ▼ button to select a letter (A~Z), a number (0~9) or a symbol (-, space). Move on the previous or next letter by pressing the œ or √ button. TV Name Prog. When you have finished entering the name, press the ENTER ( ) button to confirm the name. œ √ Move Name 1 C- - ----- 2 C- - ----- 3 C- - ----- 4 C- - ----- 5 C- - ----- Adjust English - 25 Return BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 26 Locking the Channel TV Channel Auto Store √ Manual Store √ Add/Delete √ Sort √ Name √ Child Lock √ This feature allows you to lock the television so that it cannot be switched on via the front panel. It can, however, still be switched on via the remote control. Thus, by keeping the remote control away from unauthorised users, such as children, you can prevent them from watching unsuitable programme. 1 ▼ More Move Result: Enter ) button. The main menu is displayed. Return 2 TV Press the MENU ( Press the ▲ or ▼ button until the Channel is selected. Result: Child Lock The options available in the Channel group are displayed. Prog. 1 C- - - - - - - 2 C- - - - - - - 3 C- - - - - - - 4 C- - - - - - - 5 C- - - - - - - Unlocked Unlocked Unlocked Unlocked Unlocked 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Child Lock is selected. Press the ENTER ( ) button. Result: Move Enter TV Return The Child Lock menu is displayed and the current channel is shown as selected. 5 Press the ▲ or ▼ button to select the channel to be locked. 6 Press the ENTER ( ) button. To lock the channel, select Locked by pressing the ▲ or ▼ button (to unlock the channel, select Unlocked). Press the ENTER ( ) button to confirm. Child Lock Prog. Adjust ) button. 1 C- - - - - - - 2 C- - - - - - - 3 C- - - - - - - 4 C- - - - - - - 5 C- - - - - - - Enter English - 26 Locked Unlocked Unlocked Unlocked Unlocked Return BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 27 Fine Tuning Channel Reception If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation. If the signal is weak or distorted, you may have to fine tune the channel manually. TV Channel ▲ More √ Fine Tune √ Scan 1 Press the MENU ( Result: 2 ) button. √ : Off The main menu is displayed. Press the ▲ or ▼ button until the Channel is selected. Result: LNA Move Enter Return The options available in the Channel group are displayed. Fine Tune 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Fine Tune is selected. Press the ENTER ( ) button. Result: 5 6 ) button. The horizontal bar is displayed. P 1 0 Reset œ √ Adjust Return To obtain a sharp and clear picture and good sound quality, press the œ or √ button until you reach the setting. To store the fine tuning setting in the TV’s memory, press the ENTER ( ) button. Save Move Fine Tune P 1 0 Reset 7 To reset the fine tuning to 0, select Reset by pressing the ▲ or ▼ button then press the ENTER ( ) button. Move Return Enter English - 27 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:01 AM Page 28 Viewing the Channel Scan Picture TV 1 Channel Result: ▲ More √ Fine Tune √ Scan LNA : Off Move Press the MENU ( Enter 2 √ ) button. The main menu is displayed. Press the ▲ or ▼ button until the Channel is selected. Result: The options available in the Channel group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Scan is selected. Press the ENTER ( ) button. ) button. Return Result: You can view every memorized channel in order. Using the LNA (Low Noise Amplifier) Feature TV This feature is very useful in the situation that the TV is used in a weak signal, and amplifies the TV signal in the weak signal area, but not noise. Channel ▲ More Fine Tune √ Scan √ LNA : Off This feature is working only in a weak signal condition, and that is memorized on relevant channel’s additional information. √ 1 Press the MENU ( Result: Move Enter TV Return 2 ▲ More Fine Tune √ Scan √ LNA Move : Off Off On Enter English - 28 √ Return The main menu is displayed. Press the ▲ or ▼ button until the Channel is selected. Result: Channel ) button. The options available in the Channel group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the LNA is selected. Press the ENTER ( ) button. 5 Select Off or On by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. ) button. BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 29 Changing the Picture Standard You can select the picture mode which best corresponds to your viewing requirements. 1 Press the MENU ( 6 √ Colour Tone √ : Normal √ Size Scan Mode : Auto √ Digital NR : Off √ ▼ More Move Enter Return ) button. The Mode is selected. TV Picture √ Size : Dynamic Dynamic Standard Movie : Normal Custom Select the required option by pressing the ▲ or ▼ button. Scan Mode : Auto √ Digital NR : Off √ Result: ▼ More Mode Press the ENTER ( Result: 5 The options available in the Picture group are displayed. √ : Dynamic Custom The main menu is displayed. Press the ENTER ( Result: 4 ) button. Press the ▲ or ▼ button until the Picture is selected. Result: 3 Picture Mode Result: 2 TV Custom Colour Tone The options available are listed. The following modes are available: Dynamic - Standard - Movie - Custom Press the ENTER ( ➢ ) button again. Move Enter ) button to confirm. You can select these options by simply pressing the P.MODE ( : Picture Mode) button on the remote control. Dynamic English - 29 √ √ √ Return BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 30 Customizing the Picture Settings TV Your television has several settings options that allow you to control picture quality. Picture Mode √ : Dynamic √ Custom Colour Tone √ : Normal 1 √ Size Scan Mode : Auto √ Digital NR : Off √ ▼ More Press the MENU ( Result: 2 Enter TV The main menu is displayed. Press the ▲ or ▼ button until the Picture is selected. Result: Move ) button. Return The options available in the Picture group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Custom is selected. Press the ENTER ( ) button. ) button. Custom Contrast Brightness Sharpness Colour 100 50 75 55 Result: 5 Move Enter Return Select the option (Contrast, Brightness, Sharpness, Colour or Tint-NTSC only) to be adjusted by pressing the ▲ or ▼ button. Press the ENTER ( ) button. Result: Contrast ➢ 100 TV √ Colour Tone √ : Normal √ Size Scan Mode : Auto √ Digital NR : Off √ ▼ More Move Enter Colour Tone Return Normal English - 30 If you make any changes to the custom settings, the picture standard is automatically switched to the Custom. Press the MENU ( ) button to return to the Picture menu. Press the ▲ or ▼ button until the Colour Tone is selected. Press the ENTER ( ) button. 7 Select the required colour tone (Warm1 ~ Warm10, Normal, Cool1 ~ Cool10) by pressing the œ or √ button. √ : Dynamic Custom The horizontal bar is displayed. Press the œ or √ button until you reach the setting. 6 Picture Mode The Custom menu is displayed. BP68-00280A (J59A_Euro_ENG) 9/6/04 11:14 AM Page 31 Selecting the Picture Size (4:3 Model) You can select the picture size which best corresponds to your viewing requirements. 1 2 TV Picture Mode Press the MENU ( ) button. The main menu is displayed. Result: Colour Tone 4 Press the ▲ or ▼ button until the Size is selected. Press the ENTER ( ) button. Result : The Size menu is displayed. ) button. : Normal √ √ Size Scan Mode : Auto √ Digital NR : Off √ ▼ More Move Press the ENTER ( √ √ Custom Press the ▲ or ▼ button until the Picture is selected. Result : The options available in the Picture group are displayed. 3 : Dynamic Enter TV Return Size Normal Zoom1 5 Select the required mode by pressing the ▲ or ▼ button. Press the ENTER ( ) button. Result : The following modes are available: Normal Adjusts the picture to fit into a 4:3 normal aspect ratio. (Prolonged use in 4:3 mode may cause the lifespan of the CRT to be reduced.) Zoom 1 Vertically enlarges the picture approximately 130%. Zoom 2 Vertically enlarges the picture about approximately 150%. Cinema ➢ ➢ Zoom2 Cinema Move Enter Return TV When the top and bottom of the screen margin are black (blank), they will change to gray. Lifting is available in the Zoom1 or Zoom2 mode by pressing the ▲ or ▼ button ◆ You can select these options by simply pressing the P.SIZE button on the remote control. ◆ The picture size can not be changed in the PIP mode. 4:3 Signal T Normal Zoom1 Zoom2 Cinema Zoom1 Zoom2 Cinema 16:9 Signal Normal English - 31 BP68-00280A (J59A_Euro_ENG) 9/6/04 11:14 AM Page 32 Selecting the Picture Size (Wide Model) TV You can select the picture size which best corresponds to your viewing requirements. Picture Mode : Dynamic √ √ Custom Colour Tone : Normal 1 √ Result: √ Size Scan Mode : Auto √ Digital NR : Off √ 2 ▼ More Move Return 4 Press the ▲ or ▼ button until the Size is selected. Press the ENTER ( ) button. 5 Return The options available in the Picture group are displayed. Press the ENTER ( Result : Enter The main menu is displayed. 3 Size Auto Wide 16:9 Panorama Zoom1 Zoom2 4:3 Cinema1 Cinema2 ) button. Press the ▲ or ▼ button until the Picture is selected. Result : Enter TV Move Press the MENU ( ) button. The Size menu is displayed. Select the required mode by pressing the ▲ or ▼ button. Press the ENTER ( ) button. Result : The following modes are available: Auto Wide Automatically enlarges the image to fit the 16:9 aspect ratio providing the optimum display. 16:9 Adjusts the picture to fit into the 16:9 wide aspect ratio. Panorama Adjusts a Wide picture to appear natural. Zoom 1 Vertically enlarges the picture approximately 130%. Zoom 2 Vertically enlarges the picture about approximately 150%. 4:3 Adjusts the picture to fit into a 4:3 normal aspect ratio. (Prolonged use in 4:3 mode may cause the lifespan of the CRT to be reduced.) Cinema1 To maintain optimum screen display, the picture is vertically enlarged and the letterboxed (black margin) area is filled with gray instead. Cinema2 When the top and bottom of the screen margin are black (blank), they will change to gray. TV ➢ ◆ Lifting is available in the Zoom1 or Zoom2 mode by pressing the ▲ or ▼ button. ◆ Subtitles may be cut-off or hidden below the screen area in Zoom1, Zoom2, Cinema1 and Cinema2 modes. ➢ English - 32 ◆ You can select these options by simply pressing the P.SIZE button on the remote control. ◆ The picture size can not be changed in the PIP mode. BP68-00280A (J59A_Euro_ENG) 9/6/04 11:14 AM Page 33 Selecting the Picture Size (Wide Model) (continued) 4:3 Signal Auto Wide Auto Wide Zoom2 Zoom2 16:9 16:9 4:3 4:3 Panorama Panorama Cinema1 Cinema1 Zoom1 Zoom1 Cinema2 Cinema2 16:9 Signal Auto Wide Auto Wide Zoom2 Zoom2 16:9 16:9 4:3 4:3 Panorama Panorama Cinema1 Cinema1 Zoom1 Zoom1 Cinema2 Cinema2 English - 33 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 34 Selecting the Scan Mode TV Picture Mode : Dynamic √ √ Custom Colour Tone : Normal You will normally find that scan mode is best set to Natural to reduce any slight picture flicker. However, it is possible that some occasional broadcasts (NTSC-M) may benefit by changing the scan mode. √ √ Size Scan Mode : Auto √ Digital NR : Off √ 1 Result: ▼ More Move Enter Return Press the MENU ( 2 Picture Mode : Dynamic Colour Tone : Normal 3 Press the ENTER ( √ 4 Press the ▲ or ▼ button until the Scan Mode is selected. Press the ENTER ( ) button. 5 Select the required option by pressing the ▲ or ▼ button. √ Size Scan Mode Digital NR ▼ More The options available in the Picture group are displayed. ) button. √ Custom Move √ The main menu is displayed. Press the ▲ or ▼ button until the Picture is selected. Result: TV ) button. √ : Auto Auto : Off Natural √ Digital Progressive Enter Result: Return 6 English - 34 The following modes are available: Auto - Natural - Digital - Progressive Press the ENTER ( ) button to confirm. BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 35 Using the Digital NR (Digital Noise Reduction) Feature If the signal received by your television is weak, you can activate this feature to help reduce any static and ghosting that may appear on the screen. TV Picture Mode : Dynamic 1 Press the MENU ( Result: 2 The main menu is displayed. The options available in the Picture group are displayed. Press the ENTER ( ) button. 5 √ √ Scan Mode : Auto √ Digital NR : Off √ ▼ More Move Enter TV Return Picture Mode 4 : Normal Size Press the ▲ or ▼ button until the Picture is selected. Result: 3 Colour Tone ) button. √ √ Custom : Dynamic √ √ Press the ▲ or ▼ button until the Digital NR is selected. Press the ENTER ( ) button. Custom Select Off or On by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. Scan Mode : Auto √ Digital NR : Off Off On √ Colour Tone : Normal ▼ More Move √ √ Size Enter Freezing the Current Picture You can freeze the picture when watching a television programme simply by pressing the “STILL ( )” button. To return to normal viewing, press it again. English - 35 Return BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 36 DNIeTM (Digital Natural Image engine) TV Picture ▲ More √ PIP DNIe √ : On This feature brings you more detailed images with 3D noise reduction, detail enrichment, contrast and white enhancement. A new image Compensation Algorithm gives brighter, clearer, more detailed image. DNIeTM technology will always deliver the best quality pictures from any signal. 1 Press the MENU ( Result: Move Enter Return 2 TV Press the ▲ or ▼ button until the Picture is selected. Result: Picture ▲ More √ PIP DNIe Move √ : On On Off Demo Enter Return DNIe Demo DNIe On DNIe Off The options available in the Picture group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the DNIe is selected. Press the ENTER ( ) button. 5 Press the ▲ or ▼ button to change the setting. Press the ENTER ( ) button to confirm. ◆ On: Switches on the DNIe mode. ◆ Off: Switches off the DNIe mode. ◆ Demo (Option) : The screen before applying DNIe appears on the right and the screen after applying DNIe appears on the left. ➢ English - 36 ) button. The main menu is displayed. ) button. You can select these options by simply pressing the DNIe button on the remote control. BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 37 Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the Blue Screen mode to Off. TV Setup √ Time √ Plug & Play Language 1 Press the MENU ( 4 5 The main menu is displayed. Press the ▲ or ▼ button until the Setup is selected. Result: 3 ) button. √ √ Self Focus Result: 2 : English Blue Screen : Off √ Melody : On √ ▼ More Move Enter Return The options available in the Setup group are displayed. Press the ENTER ( ) button. TV Setup √ Time √ Plug & Play Press the ▲ or ▼ button until the Blue Screen is selected. Press the ENTER ( ) button. Language : English Blue Screen Select Off or On by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. Melody √ √ Self Focus : Off Off : On On √ √ ▼ More Move Enter English - 37 Return BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 38 Viewing the Picture In Picture (PIP) Picture TV ▲ More √ PIP DNIe You can display a sub picture within the main picture of TV program or external A/V devices. In this way you can watch TV program or monitor the video input from any connected devices while watching TV or other video input. √ : On 1 Press the MENU ( Result: Move Enter Return 2 Result: PIP Source √ : On Off : TV On √ √ Swap Size : √ Position : √ Prog. : P 1 √ Move Enter The options available in the Picture group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the PIP is selected. Press the ENTER ( ) button. Result: ) button. The PIP menu is displayed with PIP option selected. Return 5 Press the ENTER ( ) button again. To activate, set the PIP to On by pressing the ▲ or ▼ button. Press the ENTER ( ) button. 6 Press the ▲ or ▼ button until the Source is selected. Press the ENTER ( ) button. PIP TV PIP : On √ Source : TV √ Swap Size Position Prog. Move TV Ext.1 Ext.2 : Ext.3 : AV : P 1 S-Video Enter √ Result: √ √ 7 Select a source of the sub picture by pressing the ▲ or ▼ button. Press the ENTER ( ) button. 8 Press the ▲ or ▼ button until the Swap is selected. Press the ENTER ( ) button. Return PIP : On √ Result: Source : TV √ ➢ √ Swap Size : √ Position : √ Prog. : P 1 √ 9 Enter Press the ▲ or ▼ button until the Size is selected. Press the ENTER ( ) button. Return ➢ PIP TV PIP : On √ Source : TV √ Size : √ Position : √ Prog. : P 1 √ Enter English - 38 Return The sizes available are displayed. (Large) (Small) (Double) (3-PIP) (12-PIP) ◆ 12-PIP : You can view up to 12 memorized channels on the sub picture spontaneously. ◆ On the 12 -PIP or 3-PIP mode, it is impossible to execute swap and position. √ Swap The main picture and the sub picture are interchanged. Not available in 12-PIP or 3-PIP modes. Result: Move The sources available are displayed. TV - Ext.1- Ext.2 - Ext.3 - AV - S-Video √ PIP TV Move The main menu is displayed. Press the ▲ or ▼ button until the Picture is selected. PIP TV ) button. 10 Select a size of the sub picture by pressing the ▲ or ▼ button. Press the ENTER ( ) button. BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 39 Viewing the Picture In Picture (PIP) (continued) Press the ▲ or ▼ button until the Position is selected. Press the ENTER ( ) button. 11 Result: ➢ The positions available are displayed. - Select a position of the sub picture by pressing the ▲ or ▼ button. Press the ENTER ( ) button. 13 Press the ▲ or ▼ button until the Prog. is selected. Press the ENTER ( ) button. You can select the channel that you want to view through sub picture by pressing the ▲ or ▼ button. ➢ PIP : On √ Source : TV √ √ Swap The Position menu is available when the Size is Large or Small. 12 PIP TV Size : √ Position : √ Prog. : P 1 √ Move Enter PIP TV When the Source is set to TV, you can select the channel of sub picture. Return PIP : On √ Source : TV √ √ Swap Size : √ Position : √ Prog. : P 1 √ Move Enter Return PIP TV PIP : On √ Source : TV √ √ Swap Size : √ Position : √ Prog. : P 1 P 1 √ Adjust Easy functions of remote control. Buttons Feature PIP ON Used to activate or deactivate the PIP function directly. SWAP Used to interchange the main picture and the sub picture. ➢ P / When the main picture is in the Video mode and the sub picture is in the TV mode, you might not hear the sound of main picture when pressing the SWAP ( ) button after changing the sub picture channel. At this time, reselect the channel of main picture. Used to select the channel of sub picture. English - 39 Return BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 40 Changing the Sound Standard You can select the type of special sound effect to be used when watching a given broadcast. Sound TV Mode : Standard √ √ Equalizer : Off √ Audio Output : Fixed √ Internal Mute : Off √ SRS TSXT : Off √ Auto Volume 1 Press the MENU ( Result: 2 Enter Internal Mute : Custom Standard √ Music √ : Off Movie √ Speech √ : Fixed Custom √ : Off SRS TSXT : Off Equalizer Auto Volume Audio Output Move Enter Press the ENTER ( Result: Sound Mode The Mode is selected. Press the ENTER ( 5 Select the required option by pressing the ▲ or ▼ button. Result: √ ) button again. The following modes are available: Standard - Music - Movie - Speech Custom. Return Press the ENTER ( ➢ English - 40 ) button. 4 6 Standard The options available in the Sound group are displayed. Return 3 TV The main menu is displayed. Press the ▲ or ▼ button until the Sound is selected. Result: Move ) button. ) button to confirm. You can select these options by simply pressing the S.MODE ( : Sound Mode) button on the remote control. BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 41 Adjusting the Sound Settings The sound settings can be adjusted to suit your personal preferences. Sound TV 1 Press the MENU ( ) button. The main menu is displayed. Press the ▲ or ▼ button until the Sound is selected. Result: Press the ENTER ( 4 Press the ▲ or ▼ button until the Equalizer is selected. Press the ENTER ( ) button. Result: ) button. √ Auto Volume : Off √ Audio Output : Fixed √ Internal Mute : Off √ SRS TSXT : Off √ Move Enter The Equalizer menu is displayed with the current option. Return Equalizer TV R Select the option to be adjusted by pressing the œ or √ button. Press the ▲ or ▼ button until you reach the setting. ➢ √ The options available in the Sound group are displayed. 3 5 : Standard Equalizer Result: 2 Mode L 100 300 1K 3K 10K √ Move Adjust Return If you make any changes to the equalizer settings, the sound standard is automatically switched to the Custom. Adjusting the Volume Automatically Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low. 1 Press the MENU ( Result: 2 3 4 5 Mode The main menu is displayed. √ √ Auto Volume : Off √ Audio Output : Fixed √ Internal Mute : Off √ SRS TSXT : Off √ Move : Standard √ Internal Mute : Off Off : FixedOn : Off SRS TSXT : Off √ Auto Volume Audio Output Move √ √ Equalizer Press the ▲ or ▼ button until the Auto Volume is selected. Press the ENTER ( ) button. Return Sound Mode ) button. Select Off or On by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. Enter TV The options available in the Sound group are displayed. Press the ENTER ( : Standard Equalizer ) button. Press the ▲ or ▼ button until the Sound is selected. Result: Sound TV Enter English - 41 √ √ Return BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 42 Setting the External Sound This feature allows you can adjust to suit your personal preferences when the equipment with output is connected to the television. Sound TV Mode : Standard √ √ Equalizer Auto Volume : Off √ Audio Output : Fixed Fixed : OffVariable √ Internal Mute SRS TSXT : Off √ 1 Press the MENU ( Result: Enter 2 Press the ▲ or ▼ button until the Sound is selected. Mode : Standard Move Press the ENTER ( 4 Press the ▲ or ▼ button until the Audio Output is selected. Press the ENTER ( ) button. √ Auto Volume : Off √ Audio Output : Fixed √ Internal Mute : Off Off : Off On √ SRS TSXT 3 ➢ √ Equalizer Enter The options available in the Sound group are displayed. Return Sound TV The main menu is displayed. √ Result: Move ) button. √ 5 ) button. For information about connection of audio outputs, refer to “Connecting to the Audio Outputs” on page 56. Select the required option (Fixed or Variable) by pressing the ▲ or ▼ button. Press the ENTER ( ) button. ◆ If you want to adjust the volume level with the volume control on the TV or external amplifier, set to Variable. Return ◆ If you set to Fixed... - You can adjust the volume level with the volume control on the audio amplifier. - The volume control buttons (MUTE, , ) of the television and remote control do not work. 6 Press the ▲ or ▼ button until the Internal Mute is selected. Press the ENTER ( ) button. If you set to On, no sound outputs of all internal speakers. ➢ English - 42 When the Audio Output is set to Variable, you can select the Internal Mute and control it. BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 43 Setting the SRS TSXT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. Trusurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel formats. 1 Press the MENU ( Result: 2 Sound TV Mode : Standard Auto Volume : Off √ Audio Output : Fixed √ Internal Mute : Off √ SRS TSXT : Off √ ) button. The main menu is displayed. Move Enter The options available in the Sound group are displayed. Sound TV Mode 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the SRS TSXT is selected. Press the ENTER ( ) button. 6 Return Press the ▲ or ▼ button until the Sound is selected. Result: 5 √ √ Equalizer Select the required option (Off, 3D Mono or Stereo) by pressing the ▲ or ▼ button. Press the ENTER ( ➢ : Standard Move Auto Volume : Off √ Audio Output : Fixed √ Internal Mute : Off √ SRS TSXT : Off Off 3D Mono Stereo √ Enter ) button to confirm. ◆ TruSurround XT, SRS and Symbol ( ) are trademarks of SRS Labs, Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc. ◆ You can select these options by simply pressing the SRS ( ) button on the remote control. √ √ Equalizer ) button. SRS TSXT : Off English - 43 Return BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 44 Setting the Melody Sound You can hear clear melody sound when the television is powered on or off. Setup TV √ Time √ Plug & Play Language : English √ 1 √ Self Focus Blue Screen : Off √ Melody : On √ ▼ More Press the MENU ( Result: 2 Enter Language : English √ √ Self Focus Move Press the ENTER ( 4 Press the ▲ or ▼ button until the Melody is selected. Press the ENTER ( ) button. 5 Select the required option (Off or On) by pressing the ▲ or ▼ button. 6 Press the ENTER ( √ Plug & Play Blue Screen : Off √ Melody : On Off On √ ▼ More 3 √ Time Enter English - 44 The options available in the Setup group are displayed. Return Setup TV The main menu is displayed. Press the ▲ or ▼ button until the Setup is selected. Result: Move ) button. Return ) button. ) button to confirm. BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 45 Selecting the Sound Mode (depending on the model) The “DUAL I-II” button displays/controls the processing and output of the audio signal. When power is switched on, the mode is automatically preset to either “Dual I ” or “Stereo”, depending on the current transmission. Regular broadcast (Standard audio) Mono (Normal use) Regular + NICAM Mono NICAM ↔ Mono Mono (Normal) NICAM Stereo NICAM ↔ Mono Stereo (Normal) NICAM Dual I/II NICAM → NICAM → Mono Dual I Dual II (Normal) → On-screen indication → NICAM Stereo Type of broadcast A2 Stereo Regular broadcast (Standard audio) Mono (Normal use) Bilingual or Dual I/II Dual I ↔ Dual II Stereo ➢ Stereo ↔ Mono (Forced mono) ◆ If the receiving conditions deteriorate, listening will be easier if the mode is set to the Mono. ◆ If the stereo signal is weak and an automatic switching occurs, then switch to the Mono. ◆ When receiving a mono sound in the AV mode, connect to the “AUDIO-L” input connector on the panel (front or side). If the mono sound comes out only from left speaker, press the DUAL I-II button. English - 45 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 46 Setting and Displaying the Current Time Setup TV √ Time √ Plug & Play Language ➢ √ : English √ Self Focus Blue Screen : Off √ Melody : On √ ▼ More 1 Move Enter Return Clock -- : -- √ Sleep Timer Off √ On Timer -- : -- Off √ Off Timer -- : -- Off √ Move Enter Hour Minute 11 00 Adjust English - 46 Press the MENU ( The main menu is displayed. The options available in the Setup group are displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Time is selected. Press the ENTER ( ) button. Result: ) button. The options available in the Time group are displayed with Clock is selected. 5 Press the ENTER ( 6 Press the ¦ or button to move to the Hour, Minute. Set these by pressing the ▲ or ▼ button. ➢ Return ) button. Press the ▲ or ▼ button until the Setup is selected. Result: Return Clock TV When pressing the “ I ” button (On/Off) on the panel of the television, the clock setting will be reset. Result: 2 Time TV √ Move You can set the television’s clock so that the current time is displayed by pressing the “INFO ( ) ” button. You must also set the time if you wish to use the automatic on or off timers. ) button. You can also set the hour and minute by pressing the numeric buttons directly BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 47 Setting the Sleep Timer You can select a time period of between 30 and 180 minutes after which the television automatically switches to Standby mode. Setup TV √ Time √ Plug & Play 1 Press the MENU ( Result: 2 4 Press the ENTER ( 6 ) button. : Off √ Melody : On √ Move Enter Return Time TV Clock 11 : 35 √ Sleep Timer Off √ On Timer -- : -- Off √ Off Timer -- : -- Off √ The options available in the Time group are displayed. Press the ▲ or ▼ button until the Sleep Timer is selected. Press the ENTER ( ) button. Select the preset time interval (Off, 30, 60, 90, 120, 150, 180) for staying on by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. ➢ √ Blue Screen ▼ More Press the ▲ or ▼ button until the Time is selected. Press the ENTER ( ) button. Result: 5 The main menu is displayed. The options available in the Setup group are displayed. √ : English Self Focus Press the ▲ or ▼ button until the Setup is selected. Result: 3 Language ) button. Move Clock 11 : 35 √ Sleep Timer Off Off 30 Off -- : -60 Off -- : -90 120 150 180 √ On Timer Off Timer Move Return Time TV ◆ You can also set these options simply by pressing the SLEEP ( ) button. ◆ If the sleep timer is not yet set, Off is displayed. If the sleep timer is already set, the remaining time before which the television switches to Standby mode is displayed. Enter Enter Sleep Timer 30 English - 47 √ √ Return BP68-00280A (J59A_Euro_ENG) 12/22/04 2:28 PM Page 48 Switching the Television On and Off Automatically You can set the On or Off timers so that the television will: ◆ Switch on automatically and tune to the channel of your choice at the time you select Setup TV √ Time √ Plug & Play Language ◆ Switch off automatically at the time you select √ : English √ Self Focus Blue Screen : Off √ Melody : On √ ➢ ▼ More Move Enter Return Time TV 11 : 35 √ Sleep Timer 30 Minute √ On Timer -- : -- Off √ Off Timer -- : -- Off √ Clock Move Enter 1 Press the MENU ( ) button. The main menu is displayed. Result: 2 Press the ▲ or ▼ button until the Setup is selected. The options available in the Setup group are Result: displayed. 3 Press the ENTER ( 4 Press the ▲ or ▼ button until the Time is selected. Press the ENTER ( ) button. The options available in the Time group are displayed. Result: 5 Press the ▲ or ▼ button until the On Timer is selected. Press the ENTER ( ) button. The options available in the On Timer group are Result: displayed. Hour Minute Prog. 06 30 P1 Volume Activation 10 Yes œ √ Move 6 Select the Hour, Minute, Prog. (programme number) or Volume. Press the œ or √ button to set these by pressing the ▲ or ▼ button. Adjust 7 To activate the On Timer with the settings satisfied, select Activation to by pressing the œ or √ button, then select Yes by pressing the ▲ or ▼ button. Return Time TV ) button. Return On Timer TV The first step is to set the television’s clock (refer to “Setting and Displaying the Current Time” on page 46). If you have not yet set the clock, the message Set the clock first. is displayed. 11 : 35 √ Sleep Timer 30 Minute √ On Timer 6 : 30 On √ Off Timer -- : -- Off √ 8 Press the MENU ( ) button. The options available in the Time group are displayed Result: again. Return 9 Press the ▲ or ▼ button until the Off Timer is selected. Press the ENTER ( ) button. Result: The Off Timer menu is displayed. 10 Set the Off Timer as methods for On Timer setting. Clock Move Enter Off Timer TV œ √ Move Hour Minute Activation 23 20 Yes Adjust English - 48 Return ➢ Absent Power Off When you set the timer “On”, your television will eventually be turned off, if you do not operate any controls during the 3 hours after the TV is turned on by timer. This function is available in only the timer “On” mode and will prevent a leakage accident or overheating, caused by your TV left on for a long time due to the timer “On” (when you are away on holiday, for example). BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 49 Viewing an External Signal Source Use the remote control to switch between viewing signals from connected equipment, such as VCR, DVD, Set-Top Box and the TV source (broadcast or cable) Input TV Source List √ : TV √ Edit Name 1 Press the MENU ( Result: 2 3 The options available in the Input group are displayed. Press the ENTER ( Result: ) button. ) button. Move Enter Return The Source List is selected. Press the ENTER ( ) button again. Source List TV TV 4 Press the ▲ or ▼ button to select signal source, then press the ENTER ( ) button. Ext.1 : ---- Ext.2 : ---- ➢ Ext.3 : ---- AV : ---- S-Video : ---- ◆ When you connect equipment to the TV, you can choose between the following sets of jacks : Ext.1, Ext.2, Ext.3, Component1 or Component2 on the TV’s rear panel, and AV or S-Video on the TV’s side panel. ▼ More Move Enter Return ◆ You can select these options simply by pressing the SOURCE ( ) button. 5 Press the MENU ( Result: ) button. Press the ▲ or ▼ button until the Edit Name is selected. Press the ENTER ( ) button. 7 Press the ▲ or ▼ button to select the external source to be edited. Press the ENTER ( ) button. The device names available are listed. Result: VCR - DVD - Cable STB - HD STB Satellite STB - AV Receiver - DVD Receiver Game - Camcorder - DVD Combo DHR (DVD HDD Recorder) - PC. 8 Source List The options available in the Input group are displayed again. 6 √ : TV √ Edit Name Move Enter Ext.1 : - - ---- - - √ Ext.2 : √ Ext.3 : AV : S-Video : - - -VCR - - -DVD -Cable - - - STB HD STB ---Satellite STB ---AV Receiver - - - -† Component1 : Component2 : Move Return Edit Name TV Select the required device by pressing the ▲ or ▼ button. Press the ENTER ( ) button to confirm. ➢ Input TV Enter If you change the external source while viewing, pictures might take a short period of time to be switched. English - 49 √ √ √ √ √ Return BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 50 Teletext Feature Most television channels provide written information services via teletext. Information provided includes: ◆ Television programme times ◆ News bulletins and weather forecasts ◆ Sports results ◆ Travel information This information is divided into numbered pages (see diagram). Part Contents A Selected page number. B Broadcasting channel identity. C Current page number or search indications. D Date and time. E Text. F Status information. FASTEXT information. ➢ Teletext information is often divided between several pages displayed in sequence, which can be accessed by: ◆ Entering the page number ◆ Selecting a title in a list ◆ Selecting a coloured heading (FASTEXT system) English - 50 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 51 Displaying the Teletext Information You can display Teletext information at any time on your television. Teletext information to be displayed correctly, ☛ For channel reception must be stable; otherwise: ◆ Information may be missing ◆ Some pages may not be displayed 1 Select the channel providing the Teletext service using the P or button. 2 Press the TTX/MIX ( ) button to activate the teletext mode. The contents page is displayed. It can be redisplayed Result: at any time by pressing the (index) button. 3 Press the TTX/MIX ( ) button again. The screen will be split into two. This Double Teletext Result: feature lets you view the actual broadcast and teletext information separately on the screen. 4 If you wish to display the actual broadcast at the same time as the teletext page, press the TTX/MIX ( ) button again. 5 Press the TV ( TV ) button to exit from the teletext display. English - 51 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 52 Selecting Display Options When you have displayed a Teletext page, you can select various options to suit your requirements. To display... TV ◆ Hidden text (answers to quiz games, for example) (reveal) ◆ The normal screen (reveal) again ◆ A secondary page (sub-page) ◆ The broadcast when searching for a page (cancel) ◆ The next page (page up) ◆ The previous page (page down) ◆ Double-size letters in the: • Upper half of the screen • Lower half of the screen (size) • Once • Twice ◆ Normal screen • Three times ➢ English - 52 Press the... To return to the normal display after using the reveal or size feature, press the TV ( ) button. BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 53 Selecting a Teletext Page You can enter the page number directly by pressing the numeric buttons on the remote control. 1 Enter the three-digit page number given in the content by pressing the corresponding numeric buttons. Result: TV The current page counter is incremented and the page is then displayed. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press the (hold). Press it again to resume. 2 If the FASTEXT system is used by the broadcasting company, the different topics covered on a Teletext page are colour-coded and can be selected by pressing the coloured buttons on the remote control. Press the coloured button corresponding to the topic that you wish to select; the available topics are given on the status line. Result: The page is displayed with other coloured information that can be selected in the same way. 3 To display the previous or next page, press the corresponding coloured button. 4 To display the subpage, see the following steps. ◆ Press the (sub-page) button. Result: The available subpages appear. ◆ Select the required sub-page. Sub-pages can be scrolled by pressing the or button. 5 When you have finished, press the TV ( your normal broadcast. ) button to return to English - 53 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 54 Storing Teletext Pages (depending on the model) You can store up to four teletext pages to display them later at leisure. 1 Select the LIST mode using the Result: ➢ English - 54 button. Four 3-digit numbers are displayed in different colours. The button is used to switch between the LIST and FLOF modes. 2 Press the coloured button corresponding to the page that will be replaced. 3 Enter the new page number using the numeric buttons. 4 Repeat steps 2 and 3 for each page to be stored, using a different coloured button each time. 5 Press the (store) button until the corresponding blocks blink. BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 55 Connecting to the External Input/Outputs ➢ ◆ EXT1 is used for the equipment with an RGB output, such as video game devices or video disc players. ◆ If your externl device is connected to the COMPONENT IN video will not be output and only audio will be output from EXT2. Rear of the TV ① or VCR ② DVD or ③ Decoder / Video game device ① This end can be fitted with: Video disc player ② If you have a second VCR and wish to copy cassette tape, connect the Satellite receiver ◆ A SCART connector ◆ An S-Video connector and two audio RCA connectors (L+R); EXT 2 ◆ Three RCA connectors (VIDEO + AUDIO-L and R) source VCR to EXT1 and the target VCR to EXT2 so that you can redirect the signal from EXT1 to EXT2. ③ If you have a decoder, connect the decoder to the VCR and the VCR to ➃ the television. ➃ When you wish to record a programme, connect the receiver to EXT1 and the VCR to EXT2 so that you can redirect the signal from EXT1 to EXT2. ☛ Whenever you connect an audio or video system to your television, ensure that all elements are switched off. Refer to the documentation supplied with your equipment for detailed connection instructions and associated safety precautions. English - 55 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 56 Connecting to the Audio Output ➢ The RCA (AUDIO OUT-L and R) connectors are used for equipment, such as an audio system (to take full advantage of the Surround sound effect). Rear of the TV Audio system Connecting to the RCA Input ➢ The RCA (VIDEO + AUDIO-L and R) connectors are used for the equipment, such as camcorders, video disc players, and some video game devices. Side of the TV (depending on the model) Camcorder Video game device Video disc player English - 56 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 57 Connecting to the S-Video Input ➢ The S-VIDEO INPUT and RCA (AUDIO-L and R) connectors are used for equipment with an S-Video output, such as a camcorder or VCR. Side of the TV (depending on the model) ① Camcorder VCR and ① To play pictures and sound, both the S-VIDEO INPUT and RCA connectors must be used. Connecting to the Component Input Rear of the TV DVD DTV receiver ➢ The COMPONENT IN connectors are used for equipment with a DVD or DTV receiver output. (480i, 480p, 576i,576p, 1080i) English - 57 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 58 Redirecting an Input to the External Output Your television enables you to choose which audio/video signals are output to the external connector. Setup TV ▲ More √ AV Setup 1 Press the MENU ( Result: 2 Enter Return AV Setup TV Ext.1 : TV √ Ext.2 : Monitor Out √ Ext.3 : TV √ Enter Return Press the ENTER ( 4 Press the ▲ or ▼ button until the AV Setup is selected. Press the ENTER ( ) button. Result: ) button. The AV Setup menu is displayed with the Ext.3 is selected. Press the ENTER ( ) button. Select the source to be directed to the output of Ext.3 by pressing the ▲ or ▼ button. ➢ AV Setup Ext.1 : Default (TV) Ext.2 : Default (Monitor Out) Ext.3 : Variable (TV, Ext1, Ext2, AV) √ Ext.1 : TV Ext.2 : Monitor Out Ext.3 : TV TV √ √ Ext.1 Ext.2 AV Move The options available in the Setup group are displayed. 3 5 TV The main menu is displayed. Press the ▲ or ▼ button until the Setup is selected. Result: Move ) button. Enter English - 58 Return 6 Press the ENTER ( ) button to confirm your choice. BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 59 Programming the Remote Control for Other Components Your TV comes equipped with a universal remote control. In addition to controlling the TV, the universal remote control can also operate a VCR, Cable box, DVD and Set-Top Box made by Samsung (even if your VCR, Cable box and DVD are made by manufacturers other than Samsung). ➢ The remote control might not be compatible with all VCRs, DVD players and Cable boxes. 1 Turn off your VCR (Cable box or DVD). 2 Press the SELECT button to switch the remote control to the VCR (CATV or DVD) mode. ➢ VCR The remote control has five modes : TV, VCR, CATV, DVD and STB) 3 Press the SET button. 4 Enter 3 digits of the VCR (Cable box or DVD) code listed on next page for your VCR (Cable box or DVD). Example: To enter the code “6”, press 0, 0, and 6. To enter the code “76”, press 0, 7, and 6. 5 Press the POWER ( ) button. Your VCR (Cable box or DVD) should turn on. If it turns on, your remote control is now set correctly. ➢ 6 If it does not turn on, repeat steps above, but try one of the other codes listed for the brand of particular yours. Once your remote control is set up, press the SELECT button any time you want to use the remote control to operate VCR (Cable box or DVD). ➢ ◆ When your remote control is in the VCR, CATV, DVD or STB mode, the volume buttons still control your television’s volume. ◆ When your remote control is in the TV mode, the VCR or DVD control buttons (rewind, stop, play/pause and fast forward) still operate your VCR or DVD. English - 59 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 60 Programming the Remote Control for Other Components VCR Remote Control Codes Admiral 020 Marantz Aiwa 025 Marta Akai 004, 027, 032 Audio Dynamics 007, 026 MEI Memorex 007, 008, 018, 021, 026, 036, 037, 062 006 021 006, 021, 024, 025 Bell&Howell 018 MGA 034 Broksonic 022 Midland 005 Candle 002, 003, 006, 008, 015, 055 Minolta Canon 021, 056 Citizen 002, 003, 006, 008, 015, 055 Colortyme Craig 007 002, 024 Curtis Mathes 002, 007, 008, 017, 021, 025, 056, 064, Daewoo 003, 010, 011, 012, 013, 014, 015, 016 066 DBX 007, 026 Mitsubishi Montgomery Ward MTC Multitech NEC Optimus Panasonic Pentax 019, 041 019, 034, 041, 046 020 002, 025 002, 005, 025, 038 007, 008, 018, 026, 037, 062, 064 020 021, 056, 071, 072 019, 041 Dimensia 017 Pentex Research Dynatech 034 Philco Emerson 001, 003, 006, 021, 022, 025, 030, 032, Philips 034, 040, 047, 050, 052, 060, 063, 065, Pioneer 019, 026, 039, 053 066, 067, 069 Portland 015, 049, 055 Fisher Funai General Electric Go Video LG (Goldstar) Harman Kardon Hitachi Instant Replay JC Penny JVC Kenwood 018, 024, 028, 029, 048, 051, 061 PROSCAN 008 021, 036, 056, 059 021, 036 017 025 Quartz 018 002, 005, 017, 021, 056 Quasar 021, 056 002 Radio Shack/Realistic 006, 007, 008, 009, 010 007 034, 048, 056 RCA 019, 025, 041, 042 021 006, 018, 020, 021, 024, 025, 029, 002, 017, 019, 021, 035, 041, 043, 057, 068 Samsung 000, 001, 002, 003, 004, 005 002, 007, 018, 019, 021, 026, 037, 041, Sansui 026 054, 056 Sanyo 018, 024 007, 008, 018, 021, 026, 037 Scott 003, 047, 052, 067 007, 008, 018, 026, 037 Sears 006, 018, 019, 024, 028, 029, 041, KLH 070 Lioyd 025 Sharp 020, 034, 045, 015 Logik 038 Shimom 027, 033, 038, 058 LXI 025 Signature Magnavox English - 60 021, 036, 056, 059 048, 051 Sony 025 027, 033, 044 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 61 Programming the Remote Control for Other Components VCR Remote Control Codes (continued) Sylvania Symphonic Tandy Tashika Tatung Teac Technics Teknika TMK Toshiba 021, 025, 036, 056, 059 025 018, 025 Totevision Unitech Victor 037 Video Concepts 021 002 Vector Research 006 025, 037, 068 002, 006 007, 026 026 007, 026 002 Videosonic Wards 002, 003, 006, 019, 020, 021, 024, 025, 006, 021, 025, 031 066 003, 019, 029, 051, 052 034, 038, 041 Yamaha Zenith 007, 008, 018, 026, 037 023, 027, 033, 073 Cable Box (CATV) Remote Control Codes Anvision GI 017, 018 041 Regency 015, 023 SA 042, 043 Hamlin 003, 024, 031 Hitachi 025, 030 Scientific Atlanta Jerrold 038, 039 Sprucer 022 Macom 025, 030 Stargate 2000 036 019, 023, 028 Sylvania 016 026 Texscan 016 Magnavox Oak Panasonic 003, 022, 027, 037, 044 Samsung 000, 001, 002, 003, 004, 005, 006, 007 042, 043 032 Tocom Philips 019, 021, 023, 028 Universal 033, 034 Pioneer 004, 018, 020, 044 Viewstar 019, 021, 023, 028 RCA Regal 014, 022, 040 003 046 Wamer amex Zenith 017, 029, 035, 037, 045 DVD Remote Control Codes Samsung 000, 001 LG (Goldstar) 006 JVC 002 Sony 007 PROSCAN/RCA 003 Denon 008 Panasonic 005 Curtis Mathes 009 English - 61 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 62 Troubleshooting: Before Contacting Service Personnel Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. No sound or picture ◆ Check that the mains lead has been connected to a wall socket. ◆ Check that you have pressed the “ I ” button (On/Off) and the POWER ( ) button. ◆ Check the picture contrast and brightness settings. ◆ Check the volume. Normal picture but no sound ◆ Check the volume. ◆ Check whether the volume MUTE ( has been pressed. ) button on the remote control No picture or black and white picture ◆ Adjust the colour settings. ◆ Check that the broadcast system selected is correct. Sound and picture interference ◆ Try to identify the electrical appliance that is affecting the television, then move it further away. ◆ Plug your television into a different mains socket. Blurred or snowy picture, distorted sound ◆ Check the direction, location and connections of your aerial. This interference often occurs due to the use of an indoor aerial. Remote control malfunctions ◆ Replace the remote control batteries. ◆ Clean the upper edge of the remote control (transmission window). ◆ Check the battery terminals. English - 62 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 63 Memo English - 63 BP68-00280A (J59A_Euro_ENG) 9/2/04 11:02 AM Page 64 - AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present. ELECTRONICS BP68-00280A-00
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement