Samsung | CS-21A8N | Samsung CS-21A8N User manual

ELECT
COLOUR
TELEVISION
Owner’s Instructions
Before operating the unit,
please read this manual thoroughly,
and retain it for future reference.
REMOTE CONTROL
ON-SCREEN MENUS
TELETEXT FUNCTION (depending on the model)
ENG
Safety Instructions
ENG
The following illustrations represent the precautions to be taken when using and moving your television.
10%
75%
35°
H
H
5°
Do NOT expose the television to
extreme temperature conditions
(below 5°C and above 35°C) or to
extreme humidity conditions (less
than 10% and more than 75%).
Do NOT expose the television to
direct sunlight.
Do NOT expose the television to
any liquids.
If the television is broken, do not
try to repair it yourself. Contact
qualified service personnel.
During a storm conditions
(especially when there is lightning)
unplug the television from the
mains socket and aerial.
If the remote control is not used for
a long period of time, remove the
batteries and store it in a cool, dry
place.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS
Caution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
CAUTION: TO PREVENT ELECTRICAL SHOCK, DO
NOT REMOVE REAR COVER, NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
WARNING:
TO PREVENT DAMAGE WHICH MAY
RESULT IN FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
☛
The main voltage is indicated on the rear
of the TV set and the frequency is 50 or
60Hz.
2
The lightning flash and arrow head
within the triangle is a warning sign
alerting you of “dangerous voltage”
inside the product.
The exclamation point within the
triangle is a warning sign alerting
you of important instructions
accompanying the product.
Mode
!
System
CZ
PAL-B/G, D/K, I, SECAM-B/G,D/K, I,
NTSC4.43MHz
CW
PAL-B/G, D/K, I, SECAM-B/G,D/K, I, L/L’,
NTSC4.43MHz
CS
PAL-B/G, D/K, I, SECAM-B/G,D/K, I,
NTSC4.43/3.58MHz
Contents
◆ PREPARING YOUR TELEVISION
■
Safety Instructions .........................................................................................
■
Caution ..........................................................................................................
■
Front Control Panel .......................................................................................
■
Connection Panels ........................................................................................
■
Infrared Remote Control (All Functions Except Teletext) ..............................
■
Infrared Remote Control (Teletext Functions) ...............................................
■
Inserting the Batteries in the Remote Control................................................
■
Connecting the Aerial (or Cable Television Network)....................................
■
Switching Your Television On and Off...........................................................
■
Placing Your Television in Standby mode .....................................................
■
Plug & Play Feature.......................................................................................
■
Viewing the Demonstration............................................................................
■
Choosing Your Language..............................................................................
2
2
4
5
6
7
8
8
9
9
10
11
12
◆ SETTING UP THE CHANNELS
■
Storing the Channels Automatically...............................................................
■
Storing the Channels Manually......................................................................
■
Giving Channels Names................................................................................
■
Skipping Unwanted Channels .......................................................................
■
Fine tuning Channel Reception .....................................................................
■
Sorting the Stored Channels .........................................................................
13
14
16
17
18
19
◆ USING THE TELEVISION
■
Changing the Picture Standard .....................................................................
■
Adjusting the Picture Settings........................................................................
■
Selecting the Picture Format (depending on the model) ...............................
■
Activation/Deactivation the Digital Noise Reduction Feature ........................
■
Changing the Sound Standard ......................................................................
■
Adjusting the Sound Settings ........................................................................
■
Extra Sound Settings (depending on the model)...........................................
■
Selecting the Sound Mode (depending on the model) ..................................
■
Selecting the Turbo Sound ............................................................................
■
Adjusting the Volume.....................................................................................
■
Switching the Sound Off Temporarily ............................................................
■
Setting the Sleep Timer .................................................................................
■
Setting and Displaying the Current Time.......................................................
■
Switching the Television On and Off Automatically .......................................
■
Setting the Blue Screen Mode.......................................................................
■
Activating the Childlock .................................................................................
20
21
21
22
23
24
25
26
27
27
27
28
28
29
30
30
◆ USING THE TELETEXT FUNCTION
■
Teletext Decoder ...........................................................................................
■
Displaying Teletext Information .....................................................................
■
Selecting a Specific Teletext Page ................................................................
■
Using FLOF to Select a Teletext Page ..........................................................
■
Storing Teletext Pages ..................................................................................
31
31
32
33
33
◆ INFORMATION ON CONNECTIONS AND RECOMMENDATIONS FOR USE
■
Connecting to the AV-1 or 2 Input/Outputs....................................................
■
Connecting to the Rear S-VIDEO Input.........................................................
■
Connecting to the Rear DVD Input ................................................................
■
Connecting to the RCA Input.........................................................................
■
Connecting Headphones ...............................................................................
■
Viewing Picture From External Sources ........................................................
■
Automatic Degaussing to Remove Colour Patches.......................................
■
Trouble Shooting: Before Contacting Service Personnel ..............................
34
35
35
36
37
37
38
38
Symbols
Press
☛
➢
Important
Note
3
ENG
Front Control Panel (depending on the model)
ENG
➣
MENU DISPLAY
Buttons and markings are subject to change.
VOLUME ADJUSTMENT
TV/VIDEO
SELECTION
STAND-BY/TIMER
INDICATOR
CHANNEL SELECTION
REMOTE CONTROL SENSOR
STAND-BY/TIMER
INDICATOR
VOLUME ADJUSTMENT
MENU DISPLAY
CHANNEL SELECTION
TIMER
INDICATOR
MENU DISPLAY
POWER
POWER
REMOTE CONTROL SENSOR
REMOTE CONTROL
SENSOR
CHANNEL SELECTION
TV/VIDEO
SELECTION
4
VOLUME ADJUSTMENT
STAND-BY INDICATOR
POWER
Connection Panels
☛
This figure shows the Standard Connector-jack panel.
The actural configuration on your TV may be different,
depending on the model.
ENG
Side of TV
Front of TV
RCA AUDIO/VIDEO
INPUT CONNECTORS
HEADPHONE JACK (OPTION)
RCA AUDIO/VIDEO
INPUT CONNECTORS
HEADPHONE JACK
(OPTION)
Rear of TV
(MONO)
VIDEO AUDIO
VIDEO L-AUDIO-R
MONITOR
-OUT
MONITOR
-OUT
INPUT 2
INPUT 1
INPUT
RCA AUDIO/VIDEO
INPUT/OUTPUT CONNECTORS
RCA AUDIO/VIDEO
INPUT/OUTPUT CONNECTORS
S-VIDEO CONNECTOR
(OPTION)
DVD INPUT CONNECTORS
(OPTION)
2
SCART AUDIO/VIDEO
INPUT/OUTPUT
CONNECTORS
OPTION
1
RGB
5
Infrared Remote Control (All Functions Except Teletext)
➣
ENG
Buttons and markings are subject to change.
POWER
TUNER/CABLE NETWORK
SELECTION
EXTERNAL INPUT SELECTION
DIRECT CHANNEL SELECTION
ON-SCREEN DISPLAY
ONE/TWO-DIGIT CHANNEL
SELECTION
SOUND MODE SELECTION
(OPTION)
AUTOMATIC SWITCH-OFF
SOUND MENU DISPLAY
(OPTION)
TURBO SOUND ON/OFF
(OPTION)
TEMPORARY SOUND SWITCHOFF
VOLUME DECREASE
PREVIOUS CHANNEL
➣
SOUND STANDARD (OPTION)
PICTURE STANDARD
PICTURE SIZE
NEXT CHANNEL
VOLUME INCREASE
MENU DISPLAY
Operation of remote control may be affected by bright artificial light near to the TV set.
6
Infrared Remote Control (Teletext Functions)
➣
Buttons and markings are subject to change.
ENG
TELETEXT DISPLAY/MIX
LIST/FLOF MODE SELECTION
?
TELETEXT HOLD
TELETEXT REVEAL
TELETEXT STORE
TELETEXT SUB-PAGE
FASTEXT TOPIC SELECTION
PICTURE SIZE
TELETEXT NEXT PAGE
1
1
TELETEXT PREVIOUS PAGE
PROGRAMME SELECTION
BY NAME
7
Inserting the Batteries in the Remote Control
ENG
You must insert or replace the batteries in the remote control when
you :
◆ Purchase the television.
S
ES
PR
◆ Find that the remote control is no longer operating
correctly.
1
Remove the cover of the remote control by pressing the symbol
( PRESS ) and pulling the cover in the direction of the arrow.
2
Insert batteries, taking care to respect the polarities:
◆
◆
3
+ on the battery with + on the remote control
- on the battery with - on the remote control
Replace the cover by pushing it in the direction of the arrow.
S
ES
PR
Connecting the Aerial (or Cable Television Network)
To view television channels correctly, a signal must be received by
the set from one of the following sources:
◆ An outdoor aerial
◆ A cable television network
Plug the aerial or cable network input cable to the 75Ω coaxial socket
on the rear of the television.
Cable
Television
Network
Rear of TV
8
Switching Your Television On and Off
ENG
The mains lead is attached to the rear of the television.
1
2
Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the TV set and
the frequency is 50 or 60Hz.
Press the “
Result:
3
Press the POWER
television on.
Result:
4
” (ON/OFF) button on the front of the television.
The Standby indicator lights up on the front panel.
button on the remote control to switch the
The programme that you were watching last is reselected automatically.
To switch your television off, press the “
again on the front of the television.
” (ON/OFF) button
Placing Your Television in Standby mode
Your television can be placed in Standby mode, in order to reduce:
◆ Power consumption
◆ Wear of the cathode ray tube
The Standby mode can be useful when you wish to interrupt
viewing temporarily (during a meal, for example).
The television is placed automatically in Standby mode when you
turn it on.
1
Press the POWER
Result:
2
➣
button on the remote control.
The screen is turned off and the Standby indicator on
the front of the television lights up.
To switch the screen back on, simply press the POWER
again on the remote control.
button
Do not leave your television in standby mode for long
periods of time (when you are away on holiday, for example).
In this case, you should switch it off completely.
9
Plug & Play Feature
ENG
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
Plug & Play
1
Ant. Input : Check
Select
Exit
If the television is in Standby mode (red light visible on the
television front panel), press the POWER
button on the remote
control.
Result:
Auto store
Area
: ASIA W/EUROPE
Search
: -/+
2
Press the ▲ or ▼ button to select required language. Press the
MENU button to enter the language, and then the message “Ant.
Input : Check” is displayed.
➣
Select
Adjust
If any language is not selected on the “Language” menu, the
“Language” menu will be displayed about 30 seconds later.
Exit
3
Time
Make sure that the antenna is connected to the TV. And then press
the + or – button.
Result:
Clock
: -- : --
Timer
: Off
Select
Enter
The “Auto store” menu is displayed.
am
4
Select your country by pressing the + or – button. To search the
channels, select the “Search” by pressing the ▲ or ▼ button, and
then press the + or – button (refer to “Storing the Channels
Automatically” on page 13). Press the MENU button to skip.
Result:
Exit
The “Time” menu is displayed.
5
Press the + or – button to move to the hour or minute. Set the hour
or minute by pressing the ▲ or ▼ button (refer to “Setting and
Displaying the Current Time” on page 28).
6
When you have finished, press the MENU button.
Function
Language
The message “Plug & Play” is displayed. It flickers for a
little while and then the “Language” menu is
automatically displayed.
: English
Time
Plug & Play
Blue screen
: Off
Result:
Childlock
Demonstration
Select
Enter
The message “ENJOY YOUR WATCHING” is displayed,
and then the channel which has been stored will be
activated.
Exit
7
If you want to reset this feature...
1
Press the MENU button.
2
Press the ▲ or ▼ button to select the “Function”, and then
press the + or – button.
3
Select the “Plug & Play” by pressing the ▲ or ▼ button, and
then press the + or – button.
Function
Language
: English
Time
Plug & Play
Blue screen
: Off
Childlock
Demonstration
Result:
Select
Enter
10
Exit
The message “Plug & Play” is displayed.
Viewing the Demonstration
ENG
To become familiar with the various menus provided by your
television, you can view the inbuilt demonstration.
Picture
Mode
1
Press the MENU button.
Custom
Adjust
Digital NR
2
Press the ▲ or ▼ button to select the “Function” and press the + or
– button.
3
Press the ▲ or ▼ button to select the “Demonstration” and press
the + or – button.
Result:
Select
: Off
Enter
Exit
Each of the menu options is displayed in turn.
Function
4
When you wish to stop the demonstration, press any button on the
remote control.
Language
: English
Time
Plug & Play
Blue screen
: Off
Childlock
Demonstration
Select
Enter
Exit
Function
Language
: English
Time
Plug & Play
Blue screen
: Off
Childlock
Demonstration
Select
Enter
11
Exit
Choosing Your Language
ENG
When you start using your television for the first time, you must
select the language which will be used for displaying menus and
indications.
Picture
Mode
Custom
Adjust
Digital NR
Select
: Off
Enter
Exit
1
Press the MENU button.
2
Press the ▲ or ▼ button to select the “Function”.
3
Press the + or – button to select the “Language”.
4
Select a particular language by pressing the ▲ or ▼ button
repeatedly.
5
When you have finished, press the TV
button or, press the
MENU button repeatedly to return to normal viewing.
Function
Language
: English
Time
Plug & Play
Blue screen
: Off
Childlock
Demonstration
Select
Enter
Exit
Function
Language
: English
Time
Plug & Play
Blue screen
: Off
Childlock
Demonstration
Select
Adjust
12
Exit
Storing the Channels Automatically
ENG
You can scan the frequency ranges available on your television and
in your area and store all the channels found automatically.
Channel
The channels are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
numbers may not correspond to those by which you wish to
identify the channels. If this is the case, refer to “Sorting the Stored
Channels” on page 19.
Auto store
Manual store
Name
Add/Erase
Fine tune
Sort
Select
1
Press the MENU button.
2
Press the ▲ or ▼ button to select the “Channel”.
3
Press the + or – button to select the “Auto store”.
4
Press the + or – button again.
Result:
5
6
Select your country by pressing the + or – button. The following
countries are available: ASIA W/EUROPE - CIS E/EUROPE CHINA - HONGKONG U/K - AUSTRALIA - NZ/INDONESIA SOUTH AFRICA - AMERICA.
+ or
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end automatically.
7
Exit
Auto store
The “Auto store” menu is displayed with the “Area”
selected.
Press the ▲ or ▼ button to select the “Search” and press the
– button.
Enter
Area
: ASIA W/EUROPE
Search
: -/+
Select
Adjust
Exit
Auto store
Area
: ASIA W/EUROPE
Search
: -/+
Select
Search
Exit
When searching and storing is complete, the “Sort” menu is
displayed.
To...
Then...
Sort the stored channels
into the desired numerical order
Go to Step 4 of the “Sorting
the Stored Channels”
procedure on page 19.
Exit the channel store function
without sorting the channels
Press the MENU button
repeatedly until the menus
disappear.
P 8 C25 ----426 MHz
22 %
Exit
Sort
From
: P 1
To
: P--
Store
: ?
Select
Adjust
13
Exit
Storing the Channels Manually
ENG
When storing channels manually, you can choose:
◆ Whether or not to store each of the channels found.
Channel
◆ The number by which you wish to identify each stored
channel.
Auto store
Manual store
Name
Add/Erase
Fine tune
Sort
Select
Enter
1
Press the MENU button.
2
Press the ▲ or ▼ button to select the “Channel” and press the + or
– button.
3
Press the ▲ or ▼ button to select the “Manual store” and press the
+ or – button.
Exit
Channel
Auto store
Manual store
Name
Result:
The “Manual store” menu is displayed with the “Color
system” selected.
Press the
quality.
+
Result:
The “Color system” is changed.
Add/Erase
Fine tune
Sort
4
Select
Enter
Exit
or
–
button repeatedly until the color is of the best
Color system
: Auto
Sound system
: BG
Search
: 138MHz
Channel
: S 6
Prog.No.
: P12
Store
: ?
Select
Adjust
➞
➞
Auto ↔ PAL ↔ SECAM ↔ NT4.43 ↔ NT3.58 (option)
Manual store
➣
5
Exit
NT4.43 is a “trick” playback mode used by
special VCR’s to play PAL-recorded videos
in NTSC mode.
Press the ▲ or ▼ button to select the “Sound system” and press
the + or – button repeatedly until the sound is of the best quality.
Result:
The “Sound system” is changed.
Color system
: Auto
Sound system
: BG
Search
: 138MHz
Channel
: S 6
Prog.No.
: P12
Store
: ?
Select
Adjust
14
Exit
➞
➞
BG ↔ DK ↔ I ↔ M (option)
Manual store
Storing the Channels Manually (continued...)
ENG
6
If you...
Press the...
Know the number
of the channel
to be stored
◆ ▲ or ▼ button to select the “Channel”.
◆ + or – button to indicate the required
number.
Do not know the
channel numbers
◆ ▲ or ▼ button to select the “Search”.
◆ + or – button to start the search.
Manual store
Color system
: Auto
Sound system
: BG
Search
: 138MHz
Channel
: S 6
Prog.No.
: P12
Store
: ?
Select
Result:
Adjust
Exit
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
your screen.
Manual store
7
8
To assign a programme number to the channel, select the
“Prog.No.”. Press the + or – button until you find the correct
number.
To store the channel and associated programme number, select
the “Store” and press the + or – button.
Color system
: Auto
Sound system
: BG
Search
: 138MHz
Channel
: S 6
Prog.No.
: P12
Store
: ?
Select
Result:
Search
Exit
“OK” is displayed.
9
Repeat Steps 6 to 8 for each channel to be stored.
10
When you have finished manual storage, press the TV
button
or, press the MENU button repeatedly to return to normal viewing
Manual store
Color system
: Auto
Sound system
: BG
Search
: 138MHz
Channel
: S 6
Prog.No.
: P12
Store
: ?
Select
Adjust
Exit
Manual store
Color system
: Auto
Sound system
: BG
Search
: 138MHz
Channel
: S 6
Prog.No.
: P12
Store
: OK
Select
Adjust
15
Exit
Giving Channels Names
ENG
If you want edit the name, you can assign new names as required.
Channel
Auto store
Manual store
1
Press the MENU button.
2
Press the ▲ or ▼ button to select the “Channel” and press the + or
– button.
3
Press the ▲ or ▼ button to select the “Name” and press the + or –
button.
4
To...
Press the...
Select a letter or number
▼ or ▲ button.
Move on the next letter
+ button.
Move back the previous letter
– button.
Name
Add/Erase
Fine tune
Sort
Select
Enter
Exit
Name
P 0 : ----P 1 : ----P 2 : ----P 3 : -----
Select
Enter
➣
Exit
Name
P 0 : -----
The characters available are:
◆ Letters of the alphabet (A...Z)
◆ Numbers (0...9)
◆ Special characters (space, -)
5
You can have each channel newlynamed.
6
When you have finished entering the name, press the TV
button
or, press the MENU button repeatedly to return to normal viewing.
P 1 : ----P 2 : ----P 3 : -----
Adjust
Move
16
Exit
Skipping Unwanted Channels
ENG
You can exclude the channels of your choice from the channel scan
operation. When you scan through the stored channels, those you
have chosen to skip are not displayed.
Channel
Auto store
Manual store
All channels that you do not specifically choose to skip are
displayed during scanning.
Name
Add/Erase
Fine tune
Sort
1
Press the MENU button.
2
Press the ▲ or ▼ button to select the “Channel” and press the + or
– button.
3
Press the ▲ or ▼ button to select the “Add/Erase” and press the
or – button.
Select
Enter
Exit
Channel
+
Auto store
Manual store
Name
Result:
The “Add/Erase” menu is displayed.
Add/Erase
Fine tune
4
Press the ▲ or ▼ button to select the required channel.
5
To add or erase the desired channel by pressing the + or – button.
6
When you have finished adding and erasing channels, press the
TV
button or, press the MENU button repeatedly to return to
normal viewing
Sort
Select
Enter
Exit
Add/Erase
P 0 : Added
P 1 : Added
P 2 : Added
P 3 : Added
Select
Adjust
Exit
Add/Erase
P 0 : Erased
P 1 : Added
P 2 : Added
P 3 : Added
Select
Adjust
17
Exit
Fine tuning Channel Reception
ENG
If the reception is clear, you do not have to fine-tune the channel,
as this is done automatically during the search and store operation.
If however the signal is weak or distorted, you may have to finetune the channel manually.
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
1
Press the MENU button.
2
Press the ▲ or ▼ button to select the “Channel” and press the + or
– button.
3
Press the ▲ or ▼ button to select the “Fine tune” and press the
or – button.
Sort
Select
Enter
Exit
Channel
+
Auto store
Result:
Manual store
Name
The “Fine tune” menu is displayed with the “Tune”
selected.
Add/Erase
4
Fine tune
To...
Press the...
obtain a sharp and
clear picture and
good sound quality
◆
memorise adjusted
picture or sound
◆ ▲ or ▼ button to select the “Store”.
◆ + or – button.
Result: “OK” is displayed.
erase adjusted
picture or sound
◆ ▲ or ▼ button to select the “Erase”.
◆ + or – button.
Result: “OK” is displayed.
Sort
Select
Enter
Exit
Fine tune
Tune
: -/+
Store
: ?
Erase
: ?
Select
Adjust
Fine tune
Fine tune
: -/+
Store
: OK
Erase
: ?
Select
Adjust
18
Result:
The horizontal bar’s
cursor moves to the left
or right.
Exit
5
Tune
+ or – button.
Exit
When you have finished, press the TV
button or, press the
MENU button repeatedly to return to normal viewing.
Sorting the Stored Channels
ENG
You can exchange the numbers of two channels, in order to:
◆ Modify the numeric order in which the channels have
been automatically stored.
◆ Give easily remembered numbers to the channels that
you watch most often.
Channel
Auto store
Manual store
Name
Add/Erase
Fine tune
Sort
Select
1
Press the MENU button.
2
Press the ▲ or ▼ button to select the “Channel” and press the + or
– button.
Enter
Exit
Channel
3
Press the ▲ or ▼ button to select the “Sort” and press the
button.
+ or –
Auto store
Manual store
Name
Add/Erase
Result:
The “Sort” menu is displayed with the “From” selected.
Fine tune
Sort
4
Press the + or – button until the channel number that you wish to
change is displayed.
Result:
5
6
Enter
Exit
The selected channel’s picture is displayed.
Press the ▲ or ▼ button to select the “To”.
Press the + or – button until the new number by which you wish to
identify the channel is displayed.
Result:
Select
Sort
From
: P 1
To
: P--
Store
: ?
The selected channel is exchanged with the one
previously stored to the chosen number.
Select
Adjust
Exit
Example: If you select “ P 1” for the “From” and “P 3” for the “To”:
◆ Channel 1 becomes channel 3.
◆ Channel 3 becomes channel 1.
Sort
7
To...
Press the...
From
To
: P 3
Confirm the exchange
of channel numbers
◆ ▲ or ▼ button to select the “Store”.
◆ + or – button.
Result: “OK” is displayed.
Store
: ?
➣ You can exchange other
channel numbers by selecting
“From” and returning to step 4.
8
Select
When you have finished sorting channels, press the TV
button
or, press the MENU button repeatedly to return to normal viewing
: P 1
Adjust
Exit
Sort
From
: P 3
To
: P 1
Store
: OK
Select
Adjust
19
Exit
Changing the Picture Standard
ENG
You can select the type of picture which best corresponds to your
viewing requirements. The following picture effects are available in
the order given:
Picture
Mode
Custom
◆ Custom, Standard, Sports, Natural, Mild.
Adjust
Digital NR
: Off
1
Press the MENU button.
Result:
Enter
2
Press the + or – button to select the “Mode”.
3
Press the + or – button repeatedly to cycle through the five
choices: Custom, Standard, Sports, Natural, Mild.
4
When you are satisfied with the settings, press the TV
button
or, press the MENU button repeatedly to return to normal viewing.
Picture
Mode
Custom
Adjust
Digital NR
: Off
Adjust
Exit
You can use your remote control to select the type of picture which
best corresponds to your viewing requirements.
To select the required picture effect, simply press the P.STD (Picture
standard) button on the remote control.
Result:
The following picture effects are available in the order given:
Custom ↔ Standard ↔ Sports ↔ Natural ↔ Mild
➞
Select
The “Picture” menu is displayed.
Exit
20
➞
Select
Adjusting the Picture Settings
ENG
Your television has several settings which allow you to control picture
quality:
Picture
◆ Color tone, Contrast, Brightness, Color, Sharpness, Tint
(NTSC only)
Mode
Custom
Adjust
Digital NR
1
Result:
The “Picture” menu is displayed.
2
Press the + or – button.
3
Press the ▲ or ▼ button to select the “Adjust”, and then press the
or – button.
Result:
➣
4
Select
The “Adjust” menu is displayed.
When select the “Mode” to “Custom”, the “Adjust” menu is
displayed.
To adjust the...
Press the...
◆ Color tone
◆
◆
◆
◆
◆
◆
➣
➣
Contrast
Brightness
Sharpness
Color
Tint (NTSC only)
◆
Enter
Exit
+
+ or – button.
Result: You select the required option
(Normal, Warm1/2, Cool1/2).
5
: Off
Press the MENU button.
Adjust
Color tone
: Normal
Contrast
: 100
Brightness
:
50
Sharpness
:
50
Color
:
50
Select
Adjust
Exit
+ or – button.
Result: The horizontal bar is displayed.
When you are satisfied with the settings, press the TV
button or,
press the MENU button repeatedly to return to normal viewing.
The television has an “automatic degaussing” system that is
activated if magnetic interference is present. To degauss the
television screen, switch power off by pressing the “ ”
(ON/OFF) button on the front panel (refer to “Automatic
Degaussing To Remove Colour Patches” on page 38).
Adjust
Color tone
: Normal
Contrast
: 100
Brightness
:
50
Sharpness
:
50
Color
:
50
Select
Adjust
Contrast
100
If you make any changes to the “Adjust” settings, the picture
standard is automatically switched to “Custom”.
Selecting the Picture Format (depending on the model)
You can select the picture format which best corresponds to your
viewing requirements by simply pressing the P.SIZE
button.
Picture format
Description
Plus
Full 12.8:9 format (extra 1 inch)
Normal
Setting for normal 4:3 format.
Zoom
Expansion of a 16:9 picture to full screen format.
16:9
Setting for the 16:9 screen format
Exit
21
Activating/Deactivating the Digital Noise Reduction Feature
ENG
If the broadcast signal received by your television is weak, you can
activate the Digital Noise Reduction feature to help reduce any
static and ghosting that may appear on the screen.
Picture
Mode
Custom
Adjust
Digital NR
: Off
1
Press the MENU button.
Result:
Select
Enter
The “Picture” menu is displayed.
Exit
2
Press the + or – button.
3
Press the ▲ or ▼ button to select the “Digital NR”.
4
To select the “On” by pressing the + or – button.
5
When you have finished, press the TV
button or, press the
MENU button repeatedly to return to normal viewing.
Picture
Mode
Custom
Adjust
Digital NR
Select
: On
Adjust
22
Exit
Changing the Sound Standard (depending on the model)
ENG
You can select the type of special sound effect to be used when
watching a given broadcast. The following sound effects are
available in the order given:
Sound
Mode
◆ Custom, Standard, Music, Movie, Speech.
Custom
Adjust
1
Press the MENU button.
2
Press the ▲ or ▼ button to select the “Sound” and press the + or –
button.
3
Press the + or – button repeatedly to cycle through the five
choices: Custom, Standard, Music, Movie, Speech.
Auto volume
: Off
Melody
: Off
Pseudo stereo
: Off
Select
Enter
Sound
Mode
4
When you are satisfied with the settings, press the TV
button
or, press the MENU button repeatedly to return to normal viewing.
Custom
Adjust
Auto volume
: Off
Melody
: Off
Pseudo stereo
: Off
Select
Adjust
You can use your remote control to select the type of special sound
effect to be used when watching a given broadcast.
To select the required sound effect, simply press the S.STD (Sound
standard) button on the remote control.
Result:
The following sound effects are available in the order given:
➞
➞
Custom ↔ Standard ↔ Music ↔ Movie ↔ Speech
➢
Exit
You can display the sound adjust (or equalizer) menu
directly by pressing the “S.MENU” (Sound menu) button on
the remote control.
23
Exit
Adjusting the Sound Settings (depending on the model)
ENG
The sound settings can be adjusted to suit your personal preferences.
Sound
Mode
Custom
Adjust
Auto volume
: Off
Melody
: Off
Pseudo stereo
: Off
Select
Enter
Exit
1
Press the MENU button.
2
Press the ▲ or ▼ button to select the “Sound” and press the + or –
button.
3
Press the ▲ or ▼ button to select the “Adjust” (or “Equalizer”).
➣
Adjust
Balance
: L 50 R 50
Bass
:
50
Treble
:
50
Select
Adjust
Balance
4
Exit
Sound
Custom
Equalizer
Auto volume
: Off
Melody
: Off
Pseudo stereo
: Off
Select
Enter
Exit
Equalizer
R
L
100
Adjust
300
1K
3K
Move
10K
Exit
Mono model
Sound
Volume
Select
: 10
Adjust
24
Press the + or – button.
Result:
L 49 R 51
Mode
When select the “Mode” to “Custom”, the “Adjust” (or
“Equalizer”) menu is displayed.
Exit
The “Adjust” (or “Equalizer”) menu is displayed.
5
Select the required option and adjust to satisfy your preference.
6
When you are satisfied with the settings, press the TV
button
or, press the MENU button repeatedly to return to normal viewing.
Extra Sound Settings (depending on the model)
ENG
The following sound settings can be adjusted to suit your personal
preferences.
Sound
◆ Auto volume
Mode
Custom
Adjust
Each broadcasting station has its own signal conditions,
and so it is not easy for you to adjust the volume every
time the channel is changed. “Auto volume” lets you
automatically adjust the volume of the desired channel by
lowering the sound output when the modulation signal is
high or by raising the sound output when the modulation
signal is low.
Auto volume
: Off
Melody
: Off
Pseudo stereo
: Off
Select
◆ Melody
Enter
Exit
Sound
You can hear clear melody sound when the TV is
powered ON or OFF.
◆ Pseudo stereo
“Pseudo stereo” converts a monaural sound signal into
two identical left and right channels.
Once the “Pseudo stereo” is set to “On” or “Off”, the
setting applies to the sound effects such as Standard,
Music, Movie and Speech.
Mode
Custom
Adjust
Auto volume
: On
Melody
: Off
Pseudo stereo
: Off
Select
Adjust
Exit
Sound
Mode
Custom
Adjust
1
Press the MENU button.
2
Press the ▲ or ▼ button to select the “Sound” and press the + or –
button.
3
To...
Press the...
Change an option
▲ or ▼ button.
Auto volume
: Off
Melody
: On
Pseudo stereo
: Off
Select
Adjust
Exit
Sound
Select the required option (On/Off)
4
+ or – button.
When you are satisfied with the settings, press the TV
button
or, press the MENU button repeatedly to return to normal viewing.
Mode
Custom
Adjust
Auto volume
: Off
Melody
: Off
Pseudo stereo
: On
Select
Adjust
25
Exit
Selecting the Sound Mode (depending on the model)
ENG
The “S.MODE I-II” button displays/controls the processing and
output of the audio signal. When power is switched ON, the mode
is automatically preset to either “Dual-I” or “Stereo”, depending
on the current transmission.
On-screen indication
Regular broadcast
(Standard audio)
Mono (Normal use)
Mono ↔ Mono
Nicam
(Normal)
NICAM Stereo
Stereo ↔ Mono
Nicam
(Normal)
NICAM Dual-I/II
Dual-I → Dual-II → Mono
Nicam
Nicam (Normal)
A2
Stereo
Regular broadcast
(Standard audio)
Mono (Normal use)
Bilingual or Dual-I/II
Dual-I ↔ Dual-II
Stereo
➣
→
Regular +
NICAM Mono
→
NICAM
Stereo
Type of broadcast
Stereo ↔ Mono
(Forced Mono)
◆ If the receiving conditions deteriorate, listening will be
easier if the mode is set to the “Mono” position using the
S.MODE I-II button.
◆ If the stereo signal is weak (or if intermittent Stereo-Mono)
and automatic switching occurs, then switch to the
“Mono” mode.
◆ When receiving mono sound in the AV mode, connect to
the “L” input jack on the panels. If the mono sound
comes out only from the left speaker, then press the
S.MODE I-II button.
26
Selecting the Turbo Sound (depending on the model)
ENG
Turbo sound suitably emphasizes both higher and lower bands of
sound (and includes other effects).
To enjoy more magnificent and dynamic sound when watching music,
movie or other channel, simply press the TURBO button on the remote
control.
Turbo sound : On
Adjusting the Volume
◆ Press the + button to increase the volume (cursor moves to the right)
◆ Press the - button to decrease the volume (cursor moves to the left)
➣
The volume setting is retained:
◆ When you switch the television to standby mode
◆ When you switch the television off using the “
(ON/OFF) button on the front panel
”
◆ If there is a power failure.
Volume
12
Switching the Sound Off Temporarily
You can switch the sound off temporarily, for example you may
wish to answer the telephone.
1
Press the MUTE
Result:
2
button.
The sound is switched off and “
” is displayed.
When you wish to turn the sound back on at the same volume as
before, press the MUTE
button again (or either of the volume
buttons).
27
Setting the Sleep Timer
ENG
You can select a time period of between 30 and 180 minutes after
which the television automatically switches to Standby mode by
pressing the "SLEEP " button.
1
Press the SLEEP
button on the remote control.
Result:
2
If the sleep timer is...
The screen displays...
Already set
Time remaining before the television
will be placed in standby mode.
Not yet set
Word “Off”.
Press the SLEEP
button repeatedly and cycle through the
preset time intervals (30, 60, 90, 120, 150, 180).
Result:
3
The television automatically switches to standby mode
when the timer reaches 0.
To cancel the sleep timer function, press the SLEEP
repeatedly and select “Off”.
button
Setting and Displaying the Current Time
You can set the television’s clock so that the current time is displayed
when you press the DISPLAY
button.
Function
Language
: English
Time
Plug & Play
Blue screen
: Off
Childlock
: Off
You must also set the time if you wish to use the automatic On/Off
timers.
➣
Demonstration
Select
Enter
The clock setting will be re-activated when pressing the
“ ” (ON/OFF) button on the front panel.
Exit
Time
Clock
: 11 : 35 am
Timer
: Off
1
Press the MENU button.
2
Press the ▲ or ▼ button to select the “Function” and press the - or
+ button.
3
Press the ▲ or ▼ button to select the “Time”, and press the
button.
Result:
Select
Adjust
Exit
4
The “Time” menu is displayed with the “Clock” selected.
To...
Press the...
Move to the hour or minute
- or + button.
Set the hour or minute
▲ or ▼ button.
5
When you have finished, press the TV
button or, press the
MENU button repeatedly to return to normal viewing.
6
To display the...
Press the DISPLAY
Channel information
Once.
Current time
Twice.
7
28
- or +
To remove the display, press the DISPLAY
button...
button again.
Switching the Television On and Off Automatically
ENG
You can set the On/Off timers so that the television will:
◆ Switch on automatically and tune to the channel of your
choice at the time you select
◆ Switch off automatically at the time you select
➣
1
2
3
The first step is to set the television’s clock (refer to
“Setting and Displaying the Current Time” on the
previous page). If you have not yet set the clock, the
message “Set the clock first” is displayed.
Time
Clock
: 11 : 35 am
Timer
: Off
Select
Press the MENU button.
Adjust
Time
Press the ▲ or ▼ button to select the “Function” and press the - or
+ button.
Press the ▲ or ▼ button to select the “Time”, and press the
button.
Clock
: 11 : 35 am
Timer
: On
On Time
: -- : -- am
Off Time
: -- : -- am
- or +
Select
Result:
Exit
Adjust
Exit
The “Time” menu is displayed.
4
Press the ▲ or ▼ button to select the “Timer”.
5
Press the - or + button to set the mode to “On”.
Time
Result:
The “On time” and “Off time” options are displayed.
6
Press the ▲ or ▼ button to select the “On time”.
7
Set the time at which you wish the television to be switched On.
To...
Press the...
Move to the hour or minute
- or + button.
Adjust the hour or minute
▲ or ▼ button.
8
In the same way, set the time at which you wish the television to be
switched Off.
9
When you have finished setting the On/Off time, press the TV
button or, press the MENU button repeatedly to return to normal
viewing.
Clock
: 11 : 35 am
Timer
: On
On Time
: 07 : 00 am
Off Time
: -- : -- am
Select
Adjust
Exit
Time
Clock
: 11 : 35 am
Timer
: On
On Time
: 07 : 00 am
Off Time
: 11 : 30 pm
Select
Adjust
29
Exit
Setting the Blue Screen Mode
ENG
If no signal is being received or the signal is very weak, a blue
screen automatically replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the
“Blue screen” mode to “Off”.
Function
Language
: English
Time
Plug & Play
Blue screen
: Off
1
Press the MENU button.
2
Press the ▲ or ▼ button to select the “Function” and press the - or
+ button.
3
Press the ▲ or ▼ button to select the “Blue screen”.
4
Press the - or + button to select the required option (On/Off).
5
When you have finished, press the TV
button or, press the
MENU button repeatedly to return to normal viewing.
Childlock
Demonstration
Select
Adjust
Exit
Activating the Childlock
You can restrict viewing by locking the channels of your choice.
Example: You can prevent your children from watching
unsuitable programmes.
Function
Language
: English
Time
Plug & Play
Blue screen
1
Press the MENU button.
2
Press the ▲ or ▼ button to select the “Function” and press the - or
+ button.
3
Press the ▲ or ▼ button to select the “Childlock” and press the
or + button.
4
Set to “On” by pressing the - or + button.
: Off
Childlock
Demonstration
Select
Adjust
Exit
➣
Childlock
Childlock
: On
Prog.No.
: P 1
Lock
: ?
Select
Adjust
If you want to unlock a channel, set to “Off”.
5
Press the ▲ or ▼ button to select the “Prog.No.”. Select the
number of the channel to be locked by pressing the - or + button.
6
Press the ▲ or ▼ button to select the “Lock” and press the
button.
Exit
Result:
7
Childlock
Childlock
: On
Prog.No.
: P 1
Lock
: Locked
Select
Adjust
30
Exit
-
- or +
“Locked” is displayed.
When you have finished, press the TV
button or, press the
MENU button repeatedly to return to normal viewing.
➣
If any channel is locked, you cannot enter the “Channel”
menu (the message “Not available” is displayed).
Teletext Decoder
ENG
Most television channels carry “teletext,” pages of written
information that provide information such as:
◆ Television programme times
◆ News bulletins
◆ Weather forecasts
◆ Sports results
◆ Subtitles for the hard of hearing
The teletext pages are organized according to six categories:
Part
Contents
A
Selected page number.
B
Broadcasting station identity.
C
Current page number or search status
D
Date and time.
E
Text.
F
Status information.
Displaying Teletext Information
You can display teletext information at any time, but signal
reception must be good. Otherwise:
◆ Information may be missing
◆ Some pages may not be displayed
To activate the teletext mode and display the contents page:
1
Using the ▲ ( 1 ) or ▼ (
the teletext service.
2
Press the TTX/MIX (
Result:
3
4
1
) button, select the channel providing
) button to activate the teletext mode.
The contents page (page 100) is displayed. It can be
redisplayed at any time by pressing the INDEX (
)
button.
1
To display the actual broadcast simultaneously with the teletext
page, press the TTX/MIX ( ) button.
To return to normal viewing press the TV
1
button.
31
Selecting a Specific Teletext Page
ENG
Press the number buttons on the remote control to enter the page
number directly:
1
Enter the three-digit page number listed in the contents by pressing
the corresponding numeric buttons.
Result:
2
If the selected page is linked with several secondary pages, the
secondary pages are displayed in sequence. To freeze the display
on a given page, press the HOLD ( ). Press the HOLD again to
resume.
3
Using the various display options:
?
1
1
32
The current page counter is incremented and the page is
then displayed.
To display...
Press the...
◆ Both teletext information and
the normal broadcast
TTX/MIX (
◆ Hidden text
(answers to quiz games, for example)
REVEAL (
?
)
◆ The normal screen
REVEAL (
?
) again
◆ A secondary page,
by entering its 4-digit number
SUB-PAGE (
◆ The next page
PAGE UP (
◆ The previous page
PAGE DOWN (
◆ Double-size letters in the:
• Upper half of the screen
• Lower half of the screen
SIZE (
)
◆ Once
◆ Twice
◆ Normal screen
◆ Three times
)
)
1
)
1
)
Using FLOF to Select a Teletext Page
ENG
The various topics included in the teletext pages are color-coded,
and can be selected by pressing the colored buttons on the remote
control.
1
Display the teletext contents page by pressing the TTX/MIX (
button.
2
Press the colored button corresponding to the topic that you wish to
select (The available topics are listed on the status information
line).
Result:
3
4
)
The page is displayed with additional color-coded
information that can be selected in the same way.
To display the:
Press the:
Previous page
Red button.
Next page
Green button.
When you have finished, press the TV
normal broadcast.
?
button to return to the
1
Storing Teletext Pages
Up to four teletext pages can be stored.
1
Select the LIST mode.
Result:
Four 3-digit numbers are displayed in different colors at
the bottom of the screen.
2
Press the colored button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4
Repeat steps 2 and 3 for each page to be stored, using a different
colored button each time.
5
Press the STORE (
displayed in white.
➣
The LIST (
?
?
) button until the corresponding blocks are
) button is used to switch between:
1
◆ LIST mode
◆ FLOF mode
33
Connecting to the AV-1 or 2 Input/Outputs
➣
ENG
➢
These figures show typical connector-jack panels.
The actual configuration on your TV may be different,
depending on your model.
AV-1 is used for equipment with an RGB output, such as video game
devices and video disc players or a VCR.
Rear of TV
AV cable
2
option
VCR
or
1
RGB
Decoder/
Video game device
(MONO)
VIDEO L-AUDIO-R
MONITOR
-OUT
Video disc player
INPUT 2
INPUT 1
or
Camcorder
VIDEO AUDIO
Satellite receiver
MONITOR
-OUT
or
INPUT
34
Connecting to the Rear S-VIDEO Input (depending on the model)
ENG
➢
The S-VIDEO/RCA (AUDIO-L and R) connectors are used for equipment
with an S-Video output, such as a camcorder or VCR.
Rear of TV
Camcorder
(MONO)
VIDEO L-AUDIO-R
MONITOR
-OUT
INPUT 2
INPUT 1
and
VCR
Connecting to the Rear DVD Input (depending on the model)
➢
The DVD/RCA (AUDIO-L and R) connectors are used for equipment with
a DVD output.
Rear of TV
(MONO)
VIDEO L-AUDIO-R
MONITOR
-OUT
INPUT 2
DVD
INPUT 1
35
Connecting to the RCA Input
➣
ENG
➢
These figures show typical connector-jack panels.
The actual configuration on your TV may be different,
depending on your model.
The RCAconnectors are used for equipment such as camcorders,
video disc players and some video game devices.
Side of TV
Camcorder
Video disc player
Front of TV
Decoder/
Video game device
36
Connecting Headphones
ENG
You can connect a set of headphones to your television if you wish
to watch a television programme without disturbing the other
people in the room.
1
Plug a set of headphones into the 3.5 mm mini-jack socket of the
television.
Result:
2
➢
The sound is heard through the headphones.
When you wish to hear the sound through the speakers again,
simply disconnect the headphones.
Prolonged use of headphones at a high volume may
damage your hearing.
Viewing Pictures From External Sources
Once you have connected up your various audio and video systems,
you can view the different sources by selecting the appropriate input.
1
Check that all the necessary connections have been made.
2
Switch the television on and if necessary, press the VIDEO
button one or more times until the required input is displayed.
➢
➢
Depending on the source selected, the pictures may appear
automatically.
To watch television programmes again, press the TV
button and select the number of the channel required.
37
Automatic Degaussing to Remove Colour Patches
ENG
A degaussing coil is mounted around the picture tube, so you do not normally need to degauss the
television manually.
If you move the television to a different position and color patches appear on the screen, you must:
◆ Switch the television off by pressing the “
” (ON/OFF) button on the front panel
◆ Unplug the television from the wall socket
◆ Leave the television power-off (stand-by) for about 30 minutes so that the automatic degauss
function can be activated, and then press the POWER
button on the remote control.
☛
If your television will be left unattended, press the “
television off.
” (ON/OFF) button to turn your
Troubleshooting: Before Contacting Service Personnel
Before contacting Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of the
television and contact your local dealer.
No sound or picture
◆
◆
◆
◆
Normal picture but no sound
◆ Check the volume.
◆ Check whether the MUTE
remote control.
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the “ ” (ON/OFF) button.
Check the picture contrast and brightness settings.
Check the volume.
button has been pressed on the
No picture or black and white picture
◆ Adjust the colour settings.
◆ Check that the broadcast system selected is correct.
Sound and picture interference
◆ Try to identify the electrical appliance that is affecting the television
and move it further away.
◆ Plug your television into a different mains socket.
Blurred or snowy picture,
distorted sound
◆ Check the direction, location and connections of your aerial.
This interference is often due to the use of an indoor aerial.
Remote control malfunctions
◆ Replace the remote control batteries.
◆ Clean the upper edge of the remote control (transmission window).
◆ Check the battery terminals.
38
Memo
ENG
39
- AFTER SALES SERVICE
- Do not hesitate to contact your retailer or service
agent if a change in the performance of your product
indicates that a faulty condition may be present.
ELECTRONICS
AA68-00886C (ENG)
Download PDF