Samsung MX-H835 User Manual


Add to my manuals
20 Pages

advertisement

Samsung MX-H835 User Manual | Manualzz
MX-H835
MINI-Compact System
MP3-CD/WMA-CD/CD-R/RW Playback
user manual
Imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
Safety Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USERSERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
WARNING
• To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
• TO PREVENT THE SPREAD
OF FIRE, KEEP CANDLES AND
OTHER ITEMS WITH OPEN
FLAMES AWAY FROM THIS
PRODUCT AT ALL TIMES.
• This product contains chemicals known to
the State of California to cause cancer and
reproductive toxicity.
FCC NOTES (for U.S.A)
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses
and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference
to radio or television reception, which can be
determined by turning the equipment off and on.
If interference is present, the user is encouraged to
try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect this equipment to an outlet that is on a
circuit that is different than the circuit the receiver
is connected to.
• Consult the dealer or an experienced radio/TV
technician for help.
2
English
This symbol indicates important
instructions accompanying the product.
This class B digital product meets all requirements
of the Canadian Interference - Causing Equipment
Regulations.
CLASS 1 LASER PRODUCT
This Compact Disc player is classified as a CLASS
1 LASER product. Use of controls, adjustments
or performance of procedures other than those
specified herein may result in hazardous radiation
exposure.
Complies with 21CFR 1040.10 except for
deviations pursuant to Laser Notice No. 50, dated
June 24, 2007.
DANGER :
• VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN. AVOID DIRECT EXPOSURE TO
BEAM. (FDA 21 CFR)
CAUTION :
• CLASS 3B VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID EXPOSURE
TO THE BEAM. (IEC 60825-1)
• THIS PRODUCT UTILIZES A LASER. USE
OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER
THAN THOSE SPECIFIED HEREIN MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE. DO
NOT OPEN THE COVER AND DO NOT REPAIR
YOURSELF. REFER SERVICING TO QUALIFIED
PERSONNEL.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
Important Safety Instructions
Read these operating instructions carefully before
using the unit. Follow all the safety instructions listed
below. Keep these operating instructions handy for
future reference.
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these Instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in
accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10.Protect the power cord from being walked on or
pinched particularly at plugs, near wall outlets,
and the point where they exit from the
apparatus.
11.Only use attachments and accessories specified
by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or
table specified by the
manufacturer, or sold with the
apparatus. When a cart is
used, use caution when
moving the cart/apparatus
combination to avoid injury
from tip-over.
13.Unplug this apparatus during lightning storms or
when unused for long periods of time.
14.Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as when the
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or
has been dropped.
Precautions
• Ensure that the AC power in your house matches
the requirements listed on the identification sticker
located on the back of your product.
• Install your product horizontally, on a suitable
base (furniture), with enough space around it for
ventilation (3 - 4 inches/7.5 - 10 cm).
• Do not place the product on amplifiers or other
equipment which may become hot. Make sure the
ventilation slots are not covered.
• Do not stack anything on top of the product.
• Before moving the product, ensure the Disc Insert
Slot is empty.
• To turn off the productcompletely, disconnect the
AC plug from the wall outlet. Disconnect the AC
plug from the wall outlet if you will leave the device
unused for a long period of time.
• During thunderstorms, disconnect the AC plug
from the wall outlet. Voltage peaks due to lightning
could damage the product.
• Do not expose the product to direct sunlight or
other heat sources. This could cause the product
to overheat and malfunction.
• Protect the product from moisture and excess
heat and equipment creating strong magnetic or
electric fields (i.e. speakers.).
• Disconnect the power cable from the AC wall
outlet if the product malfunctions.
• This product is for personal use only. It is not
intended for industrial use.
• Condensation may occur if your product or a
disc has been stored in cold temperatures. If
transporting the product during the winter, wait
approximately 2 hours until the product has
reached room temperature before using.
• The batteries used with this product contain
chemicals that are harmful to the environment. Do
not dispose of batteries in the general household
trash.
• Place the loudspeakers at a reasonable distance
on either side of the system to ensure good stereo
sound.
• Direct the loudspeakers towards the listening area.
• Do not expose this apparatus to dripping or
splashing. Do not place objects filled with liquids,
such as vases, on the apparatus.
• To turn this apparatus off completely, you must
disconnect it from the wall outlet. Consequently,
the wall outlet and power plug must be readily
accessible at all times.
• Use only a properly grounded plug and receptacle.
-- An improper ground may cause electric shock
or equipment damage. (Class l Equipment only.)
English
2
3
Disc Storage & Management
• Holding Discs
-- Fingerprints or scratches on
a disc may reduce sound and
picture quality or cause skipping.
-- Avoid touching the surface of a disc where
data has been recorded.
-- Hold the disc by the edges so that fingerprints
will not get on the surface.
-- Do not stick paper or tape on the disc.
• Cleaning Discs
-- If you get fingerprints or dirt on a
disc, clean it with a mild detergent
diluted in water and wipe with a
soft cloth.
-- When cleaning, wipe gently from
the inside to the outside of the disc.
• Disc Storage
-- Do not keep in direct sunlight.
-- Keep in a cool ventilated area.
-- Keep in a clean, protective jacket and store
vertically.
• Condensation may form if warm air comes into
contact with cold parts inside the product. When
condensation forms inside the product, it may
not operate correctly. If this occurs, remove the
disc and let the product stand for 1 or 2 hours
with the power on.
Disc and Format Compatibility
MP3-CD Discs
• Only CD-R discs with MP3 files in ISO 9660 or
Joliet format can be played.
• MP3 file names should contain no blank spaces
or special characters (for example, . / = +).
• Use discs recorded with a compression/
decompression data rate greater than 128Kbps.
• Only a consecutively written multisession disc
can be played. If there is a blank segment in the
Multisession disc, the disc can be played only up
to the blank segment.
• If the disc is not closed, it will take longer to begin
playback and not all of the recorded files may
play.
• For files encoded in the Variable Bit Rate (VBR)
format,( i.e. files encoded in both low bit rate and
high bit rate - 32Kbps ~ 320Kbps), the sound
may skip during playback.
• A maximum of 999 files can be played per CD.
Supported Audio Formats
File
Extension
*.mp3
This product does not support Secure (DRM)
Media files.
CD-R Discs
• Some CD-R discs may not be playable
depending on the disc recording device (CDRecorder or PC) and the condition of the disc.
• Use 650MB/74 minute CD-R discs.
Do not use CD-R discs over 700MB/80 minutes
as they may not be played back.
• Some CD-RW (Rewritable) media may not be
playable.
• Only CD-Rs that are properly "closed" can be
fully played. If the session is closed, but the disc
is left open, you may not be able to fully play the
disc.
4
English
*.wma
Audio
Codec
Sampling
Rate
Bit Rate
MPEG 1 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2 Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
MPEG 2.5
Layer3
16KHz ~
48KHz
80Kbps ~
320Kbps
Wave_Format_
MSAudio1
16KHz ~
48KHz
56Kbps ~
128Kbps
Wave_Format_
MSAudio2
16KHz ~
48KHz
56Kbps ~
128Kbps
➣➣Does not support WMA Professional codec.
➣➣The above table shows supported sampling rates
and bit rates. Files of not supported formats may
not be played properly.
Contents
Thank you for buying this SAMSUNG mini-compact system.
Please take time to read these instructions.
They will allow you how to operate your system and take full advantage of its features.
Safety Warnings........................................ 2
Auto Change Function............................ 10
Important Safety Instructions.................. 3
Playing a USB Device............................. 11
Precautions............................................... 3
Disc Storage & Management................... 4
To Select a Track from
a USB Device..................................... 11
Disc and Format Compatibility................ 4
To Search a Folder Quickly............... 11
Supported Audio Formats........................ 4
To Repeat........................................... 11
Contents.................................................... 5
To Use High Speed Search............... 11
Accessories............................................... 5
To Delete a File.................................. 11
Description................................................ 6
To Skip 10 Tracks.............................. 11
Front Panel........................................... 6
Using Bluetooth...................................... 12
Rear Panel............................................ 7
Setting the Clock.................................... 13
Cautions on Moving the Speakers..... 7
Timer Function........................................ 13
Remote Control................................... 8
Cancelling the Timer............................... 14
Attaching the toroidal ferrite core to
the Power cable........................................ 8
Listening to Radio................................... 14
Display Function....................................... 8
Recording Function................................ 15
CD/MP3/WMA-CD Playback................... 9
Recording Speed.................................... 15
Selecting a Track....................................... 9
GIGA SOUND Function........................... 16
Searching for a Specific Music
Selecting EQ Mode................................. 16
Passage on a CD...................................... 9
Selecting USER EQ Mode...................... 16
Repeat One or All Tracks on a
Selecting LOCAL EQ Mode.................... 16
Compact Disc........................................... 9
Using the FOOTBALL MODE................. 16
10 Skip Function..................................... 10
Party Function......................................... 16
CD Programming.................................... 10
Connecting a Microphone...................... 17
Checking or Editing the
Troubleshooting...................................... 17
Programmed Tracks............................... 10
Specifications.......................................... 18
Selecting a Stored Station...................... 14
Accessories
Check for the supplied accessories below.
TUNER/AUX
FM Antenna
User's Manual
Remote Control/Batteries
Toroidal Ferrite core ( 1 EA)
(For Power cable)
• Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance.
Symbols
Important
Note
English
4
5
Description
Front Panel
1
2
29
28
3
27
4
26
5
25
6
24
7
23
8
22
9
10
21
11
20
12
19
13
14
15
18
17
16
1.
POWER button
• Press this button to switch your mini-compact system.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
PARTY button
AUTO CHANGE button
MASTER VOLUME button
EQ button
Search/Skip button
STOP/Tuning Mode button
RETURN button
DELETE button
USB 1/USB 2 button
MP3/CD button
TUNER/AUX button
USB 1 jack
MIC jack
Disc Tray
REC SPEED
6
English
17. AUX IN 1 jack
Connecting an External Component such as an MP3
player.
• Connect AUX IN 1 on the front panel of the MINI
COMPACT to the Audio Out of the external component/
MP3 player.
• Press the TUNER/AUX button to select the AUX 1 input.
18.
19.
20.
21.
22.
23.
24.
25.
26.
27.
28.
29.
USB 2 REC jack
USB 2 REC button
OPEN/CLOSE button
BLUETOOTH button
ENTER button
PLAY/PAUSE button
Search/Skip button
USER EQ button
Window display
LOCAL EQ button FOOTBALL MODE button
GIGA SOUND BLAST button
Rear Panel
1. Cooling fan
• The fan always turns when the power is on.
Provide a minimum of 6 inches (15 cm) of clear
space on all sides of the fan when you install the
product.
2. 2.0 CH Speaker Connector Terminals
The speaker connector terminals are located on the
rear of the system.
1. To achieve the correct sound quality, insert the
speaker connector cables identified below into the
correct speaker terminals on the back of the system.
• Left speaker (marked L).
• Right speaker (marked R).
3. ONLY FOR SERVICE
• This jackis for service only. Please do not use.
4. AUX IN 2 Terminals
1
2
3
4
5
6
1. Use an Audio Cable (not supplied) to connect AUX IN
2 on the product to Audio Out on an external analog
component.
• Be sure to match connector colors.
• If the external analog component has only one
Audio Out jack, connect to either the left or right
terminal.
• Press the TUNER/AUX button to select the AUX 2
input.
• When the unit is in AUX mode, if none of the
buttons are pushed for more than 8 hours, the
power will automatically turn off.
5. FM Antenna Connector Terminal
1. Connect the FM antenna (supplied) to the FM Antenna
jack.
2. Slowly move the antenna wire until you find a location
where reception is good, then fasten it to a wall or
other rigid surface.
3. If reception is poor, you may need to install an outdoor
antenna. To do so, connect an outdoor FM antenna to
FM antenna jack on the rear of the system using a
75Ω coaxial cable (not supplied).
6. LED Terminals for the Front Speakers
To enjoy the special light effect of the speakers, connect
the LED cables of the Front Speakers to the LED
terminals of the system.
Cautions on Moving the Speakers
• When moving the main unit and speakers, make sure to separate all connected speaker cables before.
• When separating the FRONT LED cable, press the lock to release the connector as shown below.
English
6
7
Remote Control
33
1
2
3
32
TUNER/AUX
31
1.
2.
3.
4.
• During
playback, press
the desired
track number.
The selected
track is played.
4
5
6
30
29
7
8
9
10
11
12
13
14
15
16
17
18
28
27
26
25
24
23
22
21
20
19
POWER
TUNER/AUX
USB
Number(0~9) button
5.
6.
7.
8.
9.
-10
Skip
STOP
PLAY
EQ
1. Pull the fixing tab of the Toroidal ferrite core to open it.
2. Attach the Toroidal ferrite core to the Power cable
as shown and press it until it clicks.
Installing Toroidal ferrite to Power cable
Lift up to release the lock and open the core.
English
• Set a sleep time
to shut off the
product.
18.
19.
20.
21.
MY KARAOKE
MIC VOLUME -, +
USB REC
DELETE
`` Place batteries in the remote control so that the
polarities (+,- ) match the the diagram in the
battery compartment.
`` Do not dispose of batteries in a fire.
`` Do not short circuit, disassemble, or overheat
the batteries.
`` You could cause an explosion if you replace the
battery with the wrong type of battery. Replace
the battery only with the same or equivalent
type.
`` The remote control can be used up to
approximately 23 feet (7 meters) in a straight line
from the unit.
If you attach a Toroidal ferrite core to the Power
cable, it will help to prevent RF interference from
radio signals.
8
REPEAT
ENTER
VOLUME TUNING/ALBUM .
TUNING MODE
TIMER ON/OFF
TIMER SET
SLEEP
22.
23.
24.
25.
26.
27.
28.
29.
30.
31.
32.
33.
CD REC SPEED, MO/ST
VOLUME +
TUNING/ALBUM ,
AUTO CHANGE
GIGA
FOOTBALL
PAUSE
SEARCH
+10
CD/Bluetooth
DISPLAY
MUTE
• Turn off
the sound
temporarily.
Installing batteries in the Remote Control
Attaching the toroidal ferrite core to
the Power cable
Press to lock it back
10.
11.
12.
13.
14.
15.
16.
17.
Make two rounds on the coil with the cable.
* Battery size: AAA
Display Function
Lets you view all functions available on the display
and adjust the brightness of the display/LED.
Each time you press the DISPLAY button on the
remote control, the display mode will change as follows:
◆◆ The Demo function
All functions available on the system appear on the
front panel display.
◆◆ The Dimmer function
The Dimmer function is selected and the display
darkens.
◆◆ LED OFF
The LED is turned off while the dimmer function is .
working.
◆◆ Clock ON
The Clock you set is displayed.
◆◆ LED/Display ON
ALL Display and LED turn on.
CD/MP3/WMA-CD Playback
Lets you play 5 inch compact discs without an adapter.
☛☛
This product is designed to play audio CDs, CDs, CD-Rs, CD-RWs, or MP3/WMA-CDs.
• Gently open or close the CD tray. Do not apply
excessive force.
• Do not apply force toor place a heavy object on the
product.
• Do not insert an out-of-spec. shapedCD such as a
heart or octangle shaped CD. You can damage the
product.
• For the best sound, maintain your compact discs
carefully and correctly.
1. Press
the OPEN/CLOSE button to open the disc tray.
2. Place a disc gently into the tray with the disc's label facing up.
3. Press the OPEN/CLOSE button to close the disc tray.
The disc will be played automatically.
• For MP3/WMA-CD audio, it may take several minutes
to finish scanning the disc tracks.
• If you play a file with an English name or a MP3/WMACD medium with anEnglish title, the song title will be
shown in the display. (Other languages besides English
may not be displayed.)
• An English-titled track containing a special character
will not display.
<CD/MP3/WMA-CD Playback Display>
Track Indicator
Playtime Indicator
4. A
djust the volume by:
• Tuning the VOLUME knob on the unit OR
• Pressing the Vol + or – button of the remote control.
The volume level can be adjusted in 31 steps (VOLUME
MIN, VOLUME 01 - VOLUME 29, and VOLUME MAX).
5. Main Unit
To pause playback temporarily, press the p button.
Press p again to continue playing the disc.
Remote control
To pause playback temporarily, press the PAUSE(#)
button.
Press the PLAY(+) button to continue playing the disc.
6. To end playing, press the STOP (@) button.
• If there is no CD inserted in the DISC tray, the unit displays “NO
DISC”.
• The quality of MP3/WMA-CD playback may vary depending
on the condition of the disc containing the music files or the
condition of the recorder with which the disc was created.
• If different types of files or unnecessary folders are on the same
disc, you will have problems with playback.
• Keep the tray closed whenever you are not using it to prevent
dust from entering.
• You can load or unload a compact disc when the radio, USB or
auxiliary source function is selected. Also, when you press the
OPEN/CLOSE button, the product will automatically change to
the MP3/CD mode.
• If no buttons are pressed on the product or remote control for
more than 3 minutes when the product is in Pause mode, the
product will change to Stop mode.
• If no buttons are pressed on the product or remote control for
more than 25 minutes when the product is in Stop mode or no
Disc mode, the power will automatically turn off.
Selecting a Track
You can select a desired track while a disc is
being played.
To play the previous track
Press the [ button within 3 seconds after the current
track starts playing.
Press the [ button twice, 3 seconds or more after
the current track starts playing.
To play the next track
Press the ] button.
To play the current track from the beginning
Press the [ button once, 3 seconds after the current
track starts playing.
To play the track of your choice
Press the [ or ] button to move to a desired track.
• You can also use the Number (0~9) buttons on
the remote control toselect a track.
Searching for a Specific Music
Passage on a CD
When listening to a compact disc, you can quickly search for a specific music passage on a track.
To search
Press ...
Forwards
Backwards
)
(
You can also press and hold the [ or ] button on
the main unit to automatically scan for a track.
Repeat One or All Tracks on a
Compact Disc
You can play a CD, a group of tracks in a folder
(MP3 only), or a single track repeatedly:
1. P
ress the REPEAT button.
Each time you press the REPEAT button, the
repeat mode will change as follows:
MP3: OFF➝ TRACK ➝ DIR ➝ ALL ➝ RANDOM
CD: OFF➝ TRACK ➝ ALL ➝ RANDOM
2. When you want to stop the Repeat function,
press the REPEAT button until "OFF" is
displayed.
• OFF: Cancels Repeat Playback.
• TRACK: Repeatedly plays the selected track.
• DIR: Repeatedly plays all tracks in the selected
folder.
• ALL: Repeatedly plays the entire disc.
• RANDOM: Plays tracks in random order.
English
8
9
10 Skip Function
Press the +10 or -10 button while in playback mode.
The unit will skip as many as 10 tracks forward or
10 tracks back from the current track.
CD Programming
This function is not available during playback of an
MP3/WMA-CD.
• You can program the playback order of up to 24
tracks of your choice.
• However, you must stop playing the CD before
selecting tracks.
1. W
hile in CD playback mode, press the STOP(@)
button to stop playing the CD.
2. Press the ENTER (
) button to display the
message below:
3.
4.
5.
6.
7.
(01= program number, --= track number)
Use the [ or ] button to move to a desired
track.
• Press [ to move to the previous track.
• Press ] to move to the next track.
Press the ENTER (
) button to confirm your
selection. The selection is stored and
is displayed.
To select additional tracks, repeat Steps 3 and
4.
Press the PLAY (+) button to play the
programmed tracks.
Press the STOP(@) button to stop playing the
programmed tracks, Press the STOP (@) button
again to cancel playing the programmed tracks.
• If you open the disc tray or turn off the
product, your programming will be canceled.
Program mode, if you press the USB REC
➣➣Inor CD
the AUTO CHANGE buttons, these functions
will not work, and the unit will display "PROG".
10
English
Checking or Editing the
Programmed Tracks
You can check a list of programmed tracks and
edit them as you want.
1. If a programmed track is being played, press the
STOP (@) button once.
2. Press the ENTER (
the message below:
) button twice to display
(C=Check, 01= program number)
➣➣If a total of 24 tracks are already programmed, “C” will be displayed rather
than “P” in the display.
3. Press the ENTER (
) button repeatedly until
the desired track is displayed.
4. Press the [ or ] button to select a different
track.
5. Press the ENTER (
selection.
) button to confirm your
6. To play the programmed tracks, press the
PLAY (+) button.
Auto Change Function
You can play a disc followed by a USB continuously.
1. Press the AUTO CHANGE button.
Each time you press this button, the mode will
switch as follows:
AUTO CHANGE ON ; AUTO CHANGE OFF
• When the auto change mode is "ON", the unit will play
the Disc ; USB 1 ; USB 2 continuously.
• When the auto change mode is "ON", if you press
the POWER button, FUNCTION button, or the
OPEN/CLOSE button, the auto change function
automatically switches to "OFF" mode.
• When the USB is playing, if you disconnected the
USB, the auto change function automatically switches
to "OFF" mode.
• When the auto change mode is "ON", the unit cannot
record.
• When the auto change mode is "ON", the REPEAT
and SLEEP functions automatically change to OFF.
• When the auto change mode is "ON", the CD REC
SPEED, USB 2 REC, REPEAT, PROGRAM, DELETE
and SLEEP functions do not work, and the unit
displays "AUTO CHANGE ON".
• When DISC play ends, if there's no USB 1, the unit
will play music from USB 2.
• When DISC play ends, if there's no USB 1 and USB 2,
the unit will continue to play the disc.
• When USB 2 play ends, if there's no DISC, the unit
will play music from USB 1.
Playing a USB Device
Connect an external storage device such as a USB
flash memory or external HDD (Hard Disk Drive)
to the product. You can play files in MP3/WMA
format.
Before you begin! • Connect the external USB storage device to your product.
• Select the USB mode by pressing the USB 1 or USB
2 button on the main unit or select USB 1 or USB 2 by
pressing the USB button on the remote control.
• The first track of the first directory plays automatically.
➣➣To stop playing
Press the STOP ( @ ) button to stop playing.
➣➣To remove the USB device
If you press the STOP ( @ ) button once again,
you can remove the USB device safely.
Do not connect a USB recharger to the USB port
of this product. You can damage the product.
☛☛
To Select a Track from a USB Device
You can select an MP3 file during play.
f you want to move to the previous/next track, press
➣➣Ithe
[,] buttons briefly.
• The unit moves to the previous/next file within the
directory.
• If you press the [,] buttons more times than the
number of the files in the directory, the unit moves to
the next directory.
To Search a Folder Quickly
1. P
ress the TUNING/ALBUM button on the remote
control to move to the previous/next folder.
2. When the search is done, you will see the previous/
next folder name. The track will start playing.
To Repeat
1. P
ress the REPEAT button.
Each time you press the REPEAT button, the repeat
mode will change as follows:
OFF ➝ TRACK ➝ DIR ➝ ALL ➝ RANDOM
2. When you want to stop the Repeat function, press the
REPEAT button until "OFF" is displayed.
• OFF: Cancels Repeat Playback.
• TRACK: Repeatedly plays the selected track.
• DIR: Repeatedly plays all tracks in the selected folder.
• ALL: Repeatedly plays all tracks.
• RANDOM: Plays tracks in random order.
To Use High Speed Search
You can search the desired section quickly during
play.
the (,) button.
➣➣•Press
Each time you press the button, you will move
backward/forward fast.
☛☛Sound does not output in fast playback mode.
To Delete a File
You can delete a file on your USB device.
1. Play a file you want to delete.
2. Press the DELETE button.
3. Press [ or ] to select YES.
• To cancel the selection, press the RETURN button on
the main unit.
4. Press the ENTER button.
The selected file will be deleted.
☛☛The NTFS file system is not supported.
To Skip 10 Tracks
Press the +10 or -10 button while in playback mode.
The unit will skip as many as 10 tracks forward or
10 tracks back from the current track.
Read through the instructions below before using
a USB device with this unit.
• Some USB devices may not work properly with this
product.
• This product only supports external HDD's that are
formatted in the FAT file system.
• USB 2.0 HDD's should be connected to a separate
power source. Otherwise, the USB 2.0 HDD's will not
work.
• If a USB external storage device is connected to multiple
devices, only the MP3 files in the first HDD will be played.
• DRM-applied files are not supported. Digital Right
Management restricts unauthorized access to a DRM file
so that the copyright of the file is protected from piracy.
• Even if the extension of the file is .mp3, the file cannot be
played if it is formatted in MPEG layer 1 or 2.
• Do not use a USB hub. USB hubs are not supported.
• The unit displays only the first 15 characters of an MP3/
WMA file name.
• This device is designed to support removable HDDs with
less than 160GB. Depending on the device, a removable
HDD with 160GB or more may or may not be supported.
• It can take several minutes for the product to recognize
the files on a USB device.
• USB devices (particularly, USB HDDs) may cause a
delay when moving to the next track.
• Some USB devices, digital cameras, USB card readers,
iPods, iPhones, and Smart Phones may not be
supported.
• With USB devices supporting only USB VER. 1.1, the
unit may access files slowly or may not recognize file
properties.
• In Stop mode, the product will turn off automatically if
there is no USB device connected to the USB jack for 25
minutes.
English
10
11
Using Bluetooth
You can use a Bluetooth device to enjoy music with
high quality stereo sound, all without wires!
What is Bluetooth?
Bluetooth technology lets Bluetooth-compliant devices
interconnect easily with each other using a short, wireless
connection.
• A Bluetooth device may cause noise or malfunction,
depending on usage, when:
- A part of your body comes into contact with the
receiving/transmitting system of the Bluetooth device or
the product.
- It is subject to electrical variation from obstructions
caused by a wall, corner, or by office partitioning.
- It is exposed to electrical interference from same
frequency-band devices including medical equipment,
microwave ovens, and wireless LANs.
• Keep the Mini-compact system and the Bluetooth device
close together when pairing. The greaterthe distance
between the system and Bluetooth device, the worse the
quality.
• If the distance exceeds the Bluetooth operational range, the
connection is lost.
• In poor reception-sensitivity areas, the Bluetooth connection
may not work properly.
• The Mini-compact system has an effective reception range
of up to 33 feet (10 meters) in all directions if there are no
obstacles. The connection will be automatically cut off if the
Bluetooth device moves out of this range. Even within range,
the sound quality may be degraded by obstacles such as
walls or doors.
• This wireless device may cause electric interference during
its operation.
To connect the product to a Bluetooth device
Before you begin, confirm that your Bluetooth device
supports the Bluetooth-compliant stereo headset
function.
1. Press the BLUETOOTH button on the main unit or the
CD/Bluetooth button on the remote control to
display the "BT" message.
• You will see “BT READY” on the display.
2. Select the Bluetooth menu on the Bluetooth device you
want to connect. (Refer to the Bluetooth device's user's
manual.)
3. Select the Stereo headset menu on the Bluetooth device.
• You will see a list of scanned devices.
4. Select "[Samsung] MINI xxxxxx " from the searched list.
• When the product is connected to the Bluetooth
device, the product will display "device name"➞"BT"
on the front display.
• If the Bluetooth device has failed to pair with the MINI,
please delete the previous "[Samsung] MINI XXXXXX"
found by the Bluetooth device and have it search for the
MINI again.
12
English
5. Play music on the connected device.
• You can listen to the music playing on the connected
Bluetooth device over the product.
• In BLUETOOTH mode, some model's Play/Pause/
Repeat/Stop/Next/Back functions are not available.
• The product only supports Middle Quality SBC data (up
to 237kbps@48kHz), and does not support High Quality
SBC data ([email protected]).
• Only one Bluetooth device can be paired at a time.
• The Mini-compact system may not search or connect properly in the following cases:
- If there is a strong electrical field around the Minicompact system.
- If several Bluetooth devices are simultaneously paired
with the Mini-compact system.
- If the Bluetooth device is turned off, not in place, or
malfunctions
• Note that such devices as microwave ovens, wireless
LAN adaptors, fluorescent lights, and gas stoves use the
same frequency range as the Bluetooth device, which
can cause electric interference.
To disconnect the Bluetooth device from the
Product
You can disconnect the product from the Bluetooth
device. (Refer to the Bluetooth device's user's manual.)
• The product will be disconnected.
• When the product is disconnected from the
Bluetooth device, the product will display "BT
DISCONNECTED"➞"BT READY" on the front display.
To disconnect the Product from the Bluetooth
device
1. Press the another mode button on the front panel of the Mini
Component to switch from Bluetooth mode to another
mode or turn off the Mini Component. The currently
connected device is disconnected.
• In Bluetooth connection mode, the Bluetooth connection
will be lost if the distance between the product and the
Bluetooth device exceeds the limit (33 ft./10 meters).
• If the Bluetooth device comes back into the effective
range, you can restart the product to restore the pairing
with the Bluetooth device.
• With some Bluetooth devices, some functions may not
work properly.
• In Bluetooth mode, the product will turn off automatically
if there is no Bluetooth device connected to the product
for 25 minutes.
Timer Function
Using the Bluetooth Power On
When the product is turned off, you can connect
your smart device to the product via Bluetooth to
turn it on.
1. Turn on the product, press and hold the CD/
Bluetooth button on the remote control to use the
Bluetooth Power On function.
• Each time you press this button, the Bluetooth Power
mode will change as follows: BLUETOOTH POWER
ON  BLUETOOTH POWER OFF.
• Set the Bluetooth Power mode to BLUETOOTH
POWER ON by pressing this button.
2. Pair your smart device with the product via
Bluetooth. (For information on Bluetooth
connections, refer to your smart device's manual.)
3. When the product is off, and you initiate a Bluetooth
connection with your smart device, the product will
turn itself on automatically in Bluetooth mode.
• Select the desired music to play from your smart device.
• This function is available when the Bluetooth Power
function is set to BLUETOOTH POWER ON.
• In Bluetooth Power On or Off mode, when the CD,
radio, USB or auxiliary source function is selected, if you
connect your smart device to the product via Bluetooth,
the product will automatically change to the Bluetooth
mode.
• The Bluetooth Power mode setting is retained after you
turn the Mini off.
Setting the Clock
During each step, you have a few seconds to set the
required options. If you exceed this time, you must
start again.
1. Switch the system on by pressing the POWER
(
) button.
2. Press the TIMER SET button and then press the
ENTER (
) button, "CLOCK" is displayed.
3. Press the ENTER (
) button. The hour flashes.
• To increase the hours, press: ,
• To decrease the hours, press: .
4. When the correct hour is displayed, press the
ENTER (
) button. The minutes flash.
• To increase the minutes, press: ,
• To decrease the minutes, press: .
5. When the correct minute is displayed, press the
ENTER (
) button. " TIME" appears in the
display.
• The current time is now set.
• You can display the time, even when you are
using another function, by pressing the TIMER
SET button once.
• You can also use the ] or [ on the front
panel instead of the TUNING/ALBUM , or .
button in Steps 3 and 4.
The timer enables you to switch the system on or
off at specific times automatically.
• Before setting the timer, confirm that the current
time is correct.
• During each step, you have a few seconds to set
the required options. If you exceed this time, you
must start again.
• If you no longer want the system to be switched on
or off automatically, you must cancel the timer by
pressing the TIMER ON/OFF button.
Example: You want to wake up to music every morning.
1. Switch the system on by pressing the POWER (
)
button.
2. Press the TIMER SET button until TIME is displayed.
3. Press the ENTER (
) button.
Result: O
N is displayed for a few seconds. You can
set the timer switch-on time.
4. Set the timer switch-on time.
a
b
c
d
ress the TUNING/ALBUM , or . button to P
set the hours.
Press the ENTER (
) button.
Result: The minutes flash.
Press the TUNING/ALBUM , or . button to set the minutes.
Press the ENTER (
) button.
Result: O
FF is displayed for a few seconds. You can
now set the timer switch-off time.
5. Set the timer switch-off time.
a Press the TUNING/ALBUM , or . button to set the hours.
b Press the ENTER (
) button.
Result: The minutes flash.
c Press the TUNING/ALBUM , or . button to set the minutes.
d Press the ENTER (
) button.
Result: V
OL XX is displayed, where XX corresponds to the volume already set.
6. Press the TUNING/ALBUM , or . button to adjust
the volume level, and then press the ENTER (
button.
Result: The source to be selected is displayed.
)
7. Press the TUNING/ALBUM , or . button to select
the desired source to be played when the system
switches on.
If you select...
You must also...
FM (radio)
P ress the ENTER (
a
) button.
b Select a preset station by pressing
the TUNING/ALBUM , or .
button.
CD/MP3 (compact disc) Load one compact disc.
USB
Connect the USB device.
8. Press the ENTER (
) button.
Result: CHKREC (Do you want to record?) is displayed.
English
12
13
Listening to Radio
9. Press the ENTER (
) button.
Result: REC N is displayed. You can press the TUNING/ALBUM , or . button to select REC Y or REC
N, and then press ENTER (
) button.
1)If you select REC N, the Mini will not record when it
turns on. If you have already set a tuner timer
recording, selecting REC N cancels it. Note that the
Mini will still turn on and off at the times you set earlier
in this procedure.
2)If you select the REC Y, you can set the Mini to record
when it turns on. The recording switch on and switch
off times can be different from the timer switch on and
off times you set earlier in this procedure.
a.Press the ENTER (
) button.
Result: ON is displayed for a few seconds. You can
set the tuner timer recording switch-on time.
b.Press the ENTER (
) button.
Result: OFF is displayed for a few seconds. You can
set the tuner timer recording switch-off time.
• The maximum tuner timer recording time is 5 hours.
• If the timer switch on and off times are identical, the
word ERROR is displayed.
• When there is no disc in or USB connected to the Mini,
if you select the "CD" or "USB", the Mini automatically
selects "TUNER".
• You may use the ], [ buttons on the main unit
instead of the TUNING/ALBUM , or . button to
adjust settings in Steps 4 through 9.
• If the switch-on or -off time is the same as the timer
recording time, only the switch-on or -off time is
effective, and the timer recording time is not applied.
• If the auto timer is turned on, the MP3/CD or USB
function may require an additional step to be activated
depending on the disc (or device). It is better for you to
select the tuner function instead.
Cancelling the Timer
After you have set the timer, the unit will start automatically at the time shown by the TIMER indication
on the display. If you no longer want to use the timer,
you must cancel it.
To
Press the TIMER ON/OFF button....
Cancel the timer Once. Result:
Restart the timer Twice. Result:
is no longer displayed.
is displayed again.
• When you select the TIMER OFF mode, the TIMER
RECORDING and TIMER function are not available. You can store up to:
15 FM stations.
1. Select FM by pressing the TUNER/AUX button.
2.
To search for
a station
Preset
Manually
Press the TUNING MODE button
One or more times until PRESET is
displayed. You can search the stored
frequencies in the Preset mode.
One or more times until MANUAL is
displayed. You can search the frequencies one by one in the Manual mode.
3. Select the station to be stored by:
• Pressing the TUNING/ALBUM , or . button on the
remote control to select the preset station.
• Press and hold the TUNING/ALBUM , or . button
on the remote control to automatically search for active
broadcasting stations.
4. Press the MO/ST button to switch between stereo and
mono.
• In a poor reception area, select MONO for a clear, interference-free broadcast.
• This applies only when listening to an FM station. 5. If you do not want to store the radio station found,
return to Step 3 and search for another station.
Otherwise:
a. Press the ENTER button.
b. Or, press the TUNING/ALBUM button on the remote control to select a program number.
c. Press the ENTER button to save the preset.
6. To store additional radio frequencies, repeat Steps 3
through 5.
mode
➣➣In• Tuner
In the Manual mode, you can use the [ or ] button
on the main unit to manually search for a radio station.
• In the Preset mode, you can use the [ or ] button
on the main unit to search for a stored radio station.
Selecting a Stored Station
You can listen to a stored radio station.
1. Select FM by pressing the TUNER/AUX button.
2. Press the TUNING MODE button on the remote
control until “PRESET” is displayed.
3. P
ress the [ or ] button on the main unit or the
TUNING/ALBUM , or . on the remote control to
select a desired preset number.
14
English
Recording Function
You can record from a CD, radio broadcast, or an
external source to a USB storage device.
1. C
onnect an external USB storage device to the
USB 2 (
) jack on your product.
2. Play a disc, tune to a station, or connect an
external source to your product.
CD
• Press the MP3/CD button on the main unit to select
the CD function.
• Press the OPEN/CLOSE button to open the disc tray.
• Insert a CD and press the OPEN/CLOSE button to
close the disc tray.
• Use the CD selection buttons ( [ or ] ) to select the
desired song.
Tuner
• Select TUNER by pressing the TUNER/AUX button.
• Tune to a station you want to record.
External Source
• Connect an External Component/MP3 player to your
product.
• Press the TUNER/AUX button to select <AUX> input.
• Play a song from the external device.
USB 1
• Connect a USB device to the USB 1 jack of your
product
• Press the USB 1 button to select USB 1.
• Play a song from USB 1.
3. P
ress the USB REC button on the remote control or the
USB 2 REC button on the main unit to start recording.
CD
• “TRACK RECORDING” is displayed and CD
recording starts.
• Press and hold the USB REC button on the remote
control or press and hold the USB 2 REC button on
the main unit to start recording all tracks on the disc.
"FULL CD RECORDING" is displayed.
MP3-CD, USB 1
• Press the USB REC button. The currently playing file
is copied onto the USB device.
• Press and hold the USB REC button. All the files in
the current folder are copied onto the USB device.
• If you connect a microphone and press the USB REC
button, the currently playing file and the sound from the
microphone is recorded onto the USB device.
MP3 RECORDING: "MP3 RECORDING""RECORD"
CD COPY: “CHECK”“START”“COPY XX”“COPY END”
is displayed. When the recording is done, “STOP” will
be displayed.
• If there is a duplicate file name, "FILE EXIST" is
displayed, and the function is canceled.
Tuner /External Source
• RECORD is displayed.
4. T
o stop recording, press the STOP (@) button. The
unit automatically creates and saves recorded files
in .MP3 format (SAM-XXXX.MP3).
5. To remove the USB device safely, press the STOP (@) button once again. After recording, a directory named
“RECORDING(DISCxxxx)”(FULL CD RECORDING),
“RECORDING”(TRACK RECORDING), “CD
COPY”(MP3 CD/USB), “MP3 RECORDING”(MP3 CD),
“TUNER RECORDING” or “AUX RECORDING” is
created on your USB device.
• Do not disconnect the USB device or the AC Cord
during recording as this may cause damage to the file.
• WMA/MP2 files can be copied but not recorded.
• If you disconnect the USB device during a recording,
the unfinished recording file may get damaged and
cannot be deleted. If this occurs, please connect the
USB device to a PC and backup the data stored in the
USB first, and then format it.
• When the USB memory has insufficient free space, the
system will display “NOT ENOUGH MEMORY”.
• The USB device or HDD you are recording to must be
formatted in the FAT file system. The NTFS file system is
not supported.
• When you use the CD high speed search function, CD
recording is not available.
• The recording time may be longer with some USB
devices.
• In the program mode, you can't use the CD recording
function.
• The equalizer is set to "OFF" automatically and is not
available during a CD recording.
• The GIGA SOUND function is set to "OFF" automatically
and is not available during a CD recording.
• The REPEAT function is set to "OFF" automatically and
is not available during a CD recording.
• If you use the MIC function during a CD recording, the
sound from the microphone will be recorded.
• Note that setting the input level too loud when recording
music from an external device through the AUX or USB
channel may cause noise in the recording. If this occurs,
lower the external device’s volume level.
• The maximum TUNER/AUX recording time is 5 hours.
Recording Speed
You can select the recording speed before recording.
Each time you press the CD REC SPEED button on
the remote control or the REC SPEED button on the
main unit, the recording speed will change as follows:
RECORD SPD X 1 ; RECORD SPD X 4
• When you record from the tuner or an external source, you
cannot change the recording speed.
• If you select RECORD SPD X 4, sound is not produced during
the recording.
• If you connected the microphone, you have one recording
speed mode available: RECORD SPD X 1.
• During recording, if you disconnect the microphone, the
recording will stop. If you reconnect the microphone, the
recording will not restart.
English
14
15
GIGA SOUND Function
The GIGA SOUND function amplifies the bass
sound and provides twice the bass for powerful,
realistic sound.
1. P
ress the GIGA SOUND BLAST button on the
main unit or the GIGA button on the remote
control. Each time you press this button, the sound
changes as follows:
OFF ; GIGA SOUND BLAST
2. T
o cancel this function, press the GIGA SOUND
BLAST button until “OFF” is displayed.
Selecting EQ Mode
Your mini-compact system provides predefined
equalizer settings that are optimized for particular
music genre. You can also adjust the bass, middle
and treble levels manually.
1. Press the EQ button.
Each time you press this button, the sound mode
changes as follows:
OFF;FLAT;RANCHERA;CUMBIA;REGGAE
;MERENGUE;SALSA;REGGATON;FOLKLORE
;PARTY;POP;HIP HOP;ROCK;JAZZ
;CLASSIC;ELECTRONIC;MP3 ENHANCER
;VIRTUAL SOUND;U B 0
2. To set the BASS, MIDDLE, TREBLE level manually:
Press the ENTER button when you select U B 0.
Result: The BASS level flashes.
Press the TUNING/ALBUM , or . button to select a
level from -6 to +6.
Press the ENTER button.
Result: The MIDDLE level flashes.
Press the TUNING/ALBUM , or . button to select a
level from -6 to +6.
Press the ENTER button.
Result: The TREBLE level flashes.
Press the TUNING/ALBUM , or . button to select a
level from -6 to +6.
Press the ENTER button.
Result: Setting is complete.
• The equalizer is set to "OFF" automatically and is not
available during a CD recording.
Selecting USER EQ Mode
You can directly select the user EQ mode by
pressing the USER EQ button.
1. Press
the USER EQ button on the main unit until
the required option is selected.
Each time you press this button, the sound mode
changes as follows: OFF ; U B 0
2. Refer to Step 2 above to set the BASS, MIDDLE,
and TREBLE levels.
• The equalizer is set to "OFF" automatically and is not
available during a CD recording.
• If no buttons are pressed within 4 seconds, your settings
will automatically be cancelled and the previous settings
will be saved.
Selecting LOCAL EQ Mode
You can select the LOCAL EQ mode directly by
pressing the LOCAL EQ button.
1. Press
the LOCAL EQ button on the main unit until
the required option is selected.
Each time you press this button, the sound mode
changes as follows:
OFF;FLAT;RANCHERA;CUMBIA;REGGAE
;MERENGUE;SALSA;REGGATON;FOLKLORE
• The Local equalizer is set to "OFF" automatically and is
not available during a CD recording.
Using the FOOTBALL MODE
The football mode brightens the audio you are listening to and brings greater realism to sports
broadcasts.
1. Press the FOOTBALL MODE button.
Each time you press this button, the sound mode
changes as follows:
OFF ; ANNOUNCER ; STADIUM
2. To cancel this function, press the FOOTBALL
MODE button until “OFF” is displayed.
Party Function
You can choose a desired party mode.
1. P
ress the PARTY button. Each time you press the
button, the party mode changes as following:
PARTY 1 ; PARTY 2 ; PARTY 3 ; OFF
16
English
Connecting a Microphone
You can insert a microphone to sing along with your favorite CDs.
1. Connect a mono microphone (3.5ø) to the MIC jack on the front of the product.
2. Press the MIC VOL-, + button to adjust the volume of the microphone.
3. Press the MY KARAOKE button to turn My Karaoke on and off. Each time the button is pressed, the selection
changes as follows: ON ➞ OFF.
`` If you hear strange noises (squealing or howling) while using the Karaoke feature, move the microphone away from the
speakers. Turning down the microphone's volume or the speaker volume is also effective.
`` The microphone does not operate in the AUX or TUNER modes.
`` If you connect a microphone, GIGA SOUND will automatically turn off. When you remove the microphone, it will remain off,
You must turn it on again manually.
`` When My Karaoke is on, EQ/LOCAL EQ/USER EQ/FOOTBALL MODE/GIGA SOUND do not work.
`` The system does not retain the My Karaoke setting after you turn My Karaoke off.
`` Use a mono microphone. If you connect a stereo microphone to the unit, the microphone might not work properly.
`` The MY KARAOKE function is available only when you have connected a Microphone to the unit.
Troubleshooting
Refer to the chart below when this unit does not function properly. If the problem you are
experiencing is not listed below or if the instructions below do not help, turn off the unit,
disconnect the power cord, and contact the nearest authorized dealer or Samsung
Electronics Service Center.
Symptom
Check/Remedy
I cannot eject the disc.
• Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
Playback does not start
immediately when the
Play/Pause button is pressed.
• Are you using a deformed disc or a disc with scratches on the surface?
• Wipe the disc clean.
No sound.
• The unit does not produce sound during fast playback and slow
playback.
• Are the speakers connected properly?
• Is the disc severely damaged?
The remote control does not
work.
• Is the remote control being operated within its operational angle and
distance range?
• Are the batteries drained?
• The product is not working.
•Reset the unit: With no disc inserted and the “NO DISC” message on
(Example: The power goes out or the display of the product, press and hold the STOP (@) button on the
the front panel key doesn't work
main unit for longer than 5 seconds. or you hear a strange noise.)
Using the RESET function will erase all stored settings.
• The product is not working
Do not use this unless necessary.
normally.
Can't receive radio broadcast.
• Is the antenna connected properly?
• If the antenna's input signal is weak, install an external FM antenna in an
area with good reception.
English
16
17
Specifications
Weight
Dimensions
General
FM Tuner
CD Disc
Operating Temperature
Range
Operating Humidity Range
Signal/noise ratio
Usable sensitivity
Total harmonic distortion
CD : 5 inches (COMPACT
DISC)
8.60 lbs (3.9 Kg)
9.17 (W) x 13.82 (H) x 11.81 (D) inches
(233 (W) x 351 (H) x 300 (D) mm)
+41°F~+95°F (+5°C~+35°C)
10 % to 75 %
55 dB
12 dB
0.6 %
Reading Speed : 4.8 ~ 5.6 m/sec.
Maximum Play Time : 74 min.
MX-H835- 1200 Watts (MAX)
Amplifier
Front speaker output
600 W/CH (4 Ω/100 Hz)
Frequency range
20 Hz~20 KHz
S/N Ratio
75 dB
Channel separation
50 dB
Input sensitivity
(AUX 1) 1200 mV
(AUX 2) 2000 mV
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
- Design and specifications are subject to change without prior notice.
- For information on the power supply and power consumption, refer to the label attached to the product.
Open Source Announcement
To send inquiries and requests regarding open sources, contact Samsung via Email ([email protected]).
Important Note About Service
• An administration fee may be charged if either:
a. An engineer is called out at your request and there is no defect in the product.
b. You bring the unit to a repair center and there is no defect in the product.
• You will be advised of the amount of the administration fee before any work is done or a home visit
is made.
18
English
LIMITED WARRANTY TO ORIGINAL PURCHASER
Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective
material and workmanship.
SECA further warrants that if this product falls to operate properly within the specified warranty
period and the failure is due to improper workmanship or defective materials, SECA will repair
or replace the product at its option.
All warranty repairs must be performed by a SECA Authorized Service Center. (The name and
address of the location nearest you can be obtained by calling toll free: 1- 800- SAMSUNG)
LABOR
PARTS
One year (Carry- in)
One year
On carry-in models, transportation to and from the service center is the customer’s responsibility.
The original dated sales receipt must be retained by the customer and is the only acceptable
proof of purchase. It must be presented to the authorized service center at the time service is
requested.
EXCLUSIONS (WHAT IS NOT COVERED)
This warranty does not cover damage due to accident, fire, flood and/ or other acts of God; misuse,
incorrect line voltage, improper installation, improper or unauthorized repairs, commercial use or
damage that occurs in shipping. Exterior and interior finish, lamps, glass are not covered under this
warranty. Customer adjustments which are explained in the instruction manual are not covered
under the terms of this warranty. This warranty will automatically be voided for any unit found with a
missing or altered serial number. This warranty is valid only on products purchased and used in
Canada.
Samsung Electronics Canada Inc
2050 Derry Rd West
Mississauga, On. L5N 0B9
Tel: 1-800-SAMSUNG (726-7864)
Fax: (905) 542- 1199
Website: www.samsung.com/ca
English
18
19
Samsung Electronics Canada Inc
2050 Derry Rd West
Mississauga, On. L5N 0B9
Tel: 1-800-SAMSUNG (726-7864)
Fax: (905) 542- 1199
Website: www.samsung.com/ca
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre.
Area
` North America
Contact Center 
Web Site
CANADA
1-800-SAMSUNG (726-7864)
www.samsung.com/ca /support (English)
www.samsung.com/ca_fr /support (French)
U.S.A
- Consumer Electronics
1-800-SAMSUNG (726-7864)
www.samsung.com/us /support
MEXICO
ARGENTINE
01-800-SAMSUNG (726-7864)
0800-333-3733
URUGUAY
000 405 437 33
PARAGUAY
009 800 542 0001
www.samsung.com/mx /support
www.samsung.com/ar/support
www.samsung.com/latin/support(Spanish)
www.samsung.com/latin_en/support(English)
www.samsung.com/latin/support(Spanish)
www.samsung.com/latin_en/support(English)
` Latin America
BRAZIL
CHILE
BOLIVIA
COLOMBIA
COSTA RICA
0800-124-421 (Demais cidades e regiões)
4004-0000 (Capitais e grandes centros)
800-SAMSUNG(726-7864)
800-10-7260
Bogotá 600 12 72
Gratis desde cualquier parte del país 01 8000 112 112 ó
desde su celular #SAM(726)
0-800-507-7267
00-800-1-SAMSUNG (726-7864)
DOMINICA
1-800-751-2676
ECUADOR
1-800-10-72670
1-800-SAMSUNG (72-6786)
EL SALVADOR
800-6225
GUATEMALA
HONDURAS
JAMAICA
NICARAGUA
PANAMA
PERU
1-800-299-0013
1-800-299-0033
800-27919267
800-2791-9111
1-800-234-7267
1-800-SAMSUNG (726-7864)
001-800-5077267
800-7267
800-0101
0-800-777-08
Desde celulares por favor llamar al número 336 8686
PUERTO RICO
1-800-682-3180
TRINIDAD & TOBAGO
1-800-SAMSUNG(726-7864)
VENEZUELA
0-800-SAMSUNG (726-7864)
www.samsung.com.br/support
www.samsung.com/cl /support
www.samsung.com/cl/support
www.samsung.com/co/support
www.samsung.com/latin/support(Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin_en/support(English)
www.samsung.com/latin/support
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/pe/support
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/latin/support (Spanish)
www.samsung.com/latin_en/support (English)
www.samsung.com/ve/support
AH68-02688N-00

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement