Electrolux EHS7631P User Manual

C
e
r
a
m
i
c
g
l
a
s
s
h
o
b
Installation and Operating
Instructions
EHS 7631 P
822 930 192-A-201205-01
Dear Customer,
Please read these user instructions carefully and
keep them to refer to later.
Please pass the user instructions on to any future
owner of the appliance.
The following symbols are used in the
text:
1 Safety instructions
Warning! Information that affects your personal safety.
Important! Information that prevents damage
to the appliance.
3 Useful tips and hints
2 Environmental information
2
Contents
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cooking surface layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Control panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Touch Control sensor fields . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
5
6
6
7
7
Operating the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the appliance on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the heat setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switching the outside ring on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Locking/unlocking the control panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the automatic warm-up function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the child safety device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety cut-out . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8
8
8
8
8
9
9
10
12
Tips on Cooking and Frying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cookware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Examples of cooking applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13
13
13
14
Cleaning and Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Metal décor strips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
15
What to do if … . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16
Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18
Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19
Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23
3
Operating Instructions
1 Safety instructions
3 Please
comply with these instructions. If you
do not, any damage resulting is not covered
by the warranty.
5 This appliance conforms with the following EU
Directives:
– 73/23/EEC dated 19.02.1973 Low Voltage Directive
– 89/336/EEC dated 03.05.1989 EMC Directive inclusive of Amending Directive 92/31/EEC
– 93/68/EEC dated 22.07.1993 CE Marking Directive
Correct use
• This appliance should be used only for normal domestic cooking and frying of food.
• The appliance must not be used as a work surface
or as a storage surface.
• Additions or modifications to the appliance are not
permitted.
• Do not place or store flammable liquids, highly inflammable materials or fusible objects (e.g. plastic
film, plastic, aluminium) on or near the appliance.
Children’s safety
• Small children must be kept away from the appliance.
• Only let bigger children work on the appliance under supervision.
General safety
• The appliance may only be installed and connected by trained, registered service engineers.
• Built-in appliances may only be used after they
have built in to suitable built-in units and work surfaces that meet standards.
• In the event of faults with the appliance or damage
to the glass ceramic (cracks, scratches or splits),
the appliance must be switched off and disconnected from the electrical supply, to prevent the
possibility of an electric shock.
• Repairs to the appliance must only be carried out
by trained registered service engineers.
Safety during use
• Remove stickers and film from the glass ceramic.
• There is the risk of burns from the appliance if used
carelessly.
4
• Cables from electrical appliances must not touch
the hot surface of the appliance or hot cookware.
• Overheated fats and oils can ignite quickly. When
cooking with fat or oil (e.g. chips) do not leave the
appliance unattended.
• Switch the cooking zones off after each use.
Safety when cleaning
• For cleaning, the appliance must be switched off
and cooled down.
• For safety reasons, the cleaning of the appliance
with steam jet or high-pressure cleaning equipment is not permitted.
How to avoid damage to the appliance
• The glass ceramic can be damaged by objects falling onto it.
• The edge of the glass ceramic can be damaged by
being knocked by the cookware.
• Cookware made of cast iron, cast aluminium or
with damaged bottoms can scratch the glass ceramic if pushed across the surface.
• Objects that melt and things that boil over can
burn onto the glass ceramic and should be removed straightaway.
• To avoid damaging cookware and glass ceramics,
do not allow saucepans or frying pans to boil dry.
• Do not use the cooking zones with empty cookware or without cookware.
Description of the Appliance
Cooking surface layout
Single cooking zone
1200W
Double ring cooking zone
700/1700W
Control panel
Double ring cooking zone
750/2200W
Single cooking zone
1800W
5
Control panel layout
Cooking zone indicators
Timer function
Timer
Timer display
Display
Double ring pilot light
Heat setting selection
Outside ring
On/Off
Pilot light
Double ring
Outside ring
On/Off
On/Off
with power indicator
Lock
pilot light
Touch Control sensor fields
The appliance is operated using Touch Control sensor fields. Functions are controlled by touching sensor fields and confirmed by displays and acoustic
signals.
Touch the sensor fields from above, without covering
other sensor fields.
Sensor field
TIMER
/
6
Function
On / Off
To switch the appliance on and off
Increase settings
Increasing heat setting/time
Decrease settings
Decreasing heat setting/time
Timer
Timer selection
Lock
Locking/unlocking the control panel
Double ring switch
Switches outside ring
on and off
Displays
Display
¾
u
¿-Ç
a
e
h
l
_
Description
Cooking zone is switched off
Keep warm setting
Keep warm setting is set
Heat settings
Heat setting is set
Automatic warm up function
Automatic warm-up function is activated
Fault
Malfunction has occurred
Residual heat
Cooking zone is still hot
Child safety device
Lock/child safety device is engaged
Safety cut-out
Safety cut-out has been activated
Residual heat indicator
1 Warning!
Risk of burns from residual heat. After being switched off, the cooking zones need
some time to cool down. Look at the residual
heat indicator h .
3 Residual heat can be used for melting and
keeping food warm.
7
Operating the appliance
Switching the appliance on and off
Control panel
Display
Pilot light
Switch on
Touch
for 2 seconds
lights up
Switch off
Touch
for 1 second
¾/h
h / none
goes out
3 After
switching on, within approx. 10 seconds
a heat setting or a function must be set, otherwise the appliance automatically switches itself off.
Setting the heat setting
Control panel
Indicator
To increase
Touch
To decrease
Touch
To switch off
Touch
u to Ç
Ç to ¾
¾
and
at the same time
3 The
keep warm setting u lies between ¾ and
¿. It is used to keep food warm.
Switching the outside ring on and off
By switching the outside rings on or off, the effective
heating surface can be matched to the size of the
cookware.
3 Before an outside ring can be switched on, the
inside ring must be switched on.
Double ring cooking zones
Sensor field
To switch on outside ring
Touch
To switch off outside ring
Touch
/
/
Pilot light
for 1-2 seconds
is lit
for 1-2 seconds
goes out
Locking/unlocking the control panel
The control panel, with the exception of the “On/Off”
sensor field, can be locked at any time in order to
prevent the settings being changed e.g. by wiping
over the panel with a cloth.
Control panel
Display
Switch on
Touch
l (for 5 seconds)
Switch off
Touch
previously set heat setting
3 When
you switch the appliance off, the locking
function is automatically switched off.
8
Using the automatic warm-up function
All cooking zones are equpped with an automatic
warm up function When setting a heat setting using
, when starting from ¾, the cooking zone switches to full power for a certain amount of time and then
automatically switches back to the heat setting set.
Control panel
possible heat set- Display
tings
Switch on
(only when starting at ¾)
Touch
¿ to Æ
a (after 5 seconds)
Switch off
Touch
Not used
Touch
Æ to ¿ / u
Ç to u
Æ to u
Ç to u
3 If during the automatic warm up a a higher
heat setting is selected, e.g. from Á to Ã, the
automatic warm up is adjusted.
3 If there is still residual heat on the cooking
zone (display h), the automatic warm up is
not performed.
The length of time that the automatic warm up function operates depends on the heat setting selected.
Heat setting
Length of the automatic warm up [min:sec]
v
0:30
1
1:00
2
1:40
3
4:50
4
6:30
5
10:10
6
2:00
7
3:30
8
4:30
9
---
Using the child safety device
The child safety device prevents unintentional use of
the appliance.
Setting the child safety device
Step
Control panel
Display/Signal
1.
Switch on the appliance
(Do not set a heat setting)
¾
2.
Touch
Acoustic signal
3.
Touch
until the signal sounds
l
Appliance switches off. The child safety device is engaged.
9
Releasing the child safety device
Step
1.
Control panel
l
Switch on the appliance
2.
Touch
3.
Touch
Display/Signal
until the signal sounds
Acoustic signal
Appliance switches off. The child safety device is released.
Overriding the child safety device
The child safety device can be released in this way
for a single cooking session; it remains activated afterwards.
Step
1.
2.
Control panel
Switch on the appliance
Touch
and
at the same time
Display/Signal
l
¾ / acoustic signal
Until the appliance is next switched off, it can used as normal.
3 After overriding the child safety device, a heat
setting or a function must be set within
approx. 10 seconds, otherwise the appliance
automatically switches itself off.
Using the timer
Function
Pre-requisite
Result after time has elapsed
Automatic cut-out
With heat setting set
Acoustic signal
00 flashes
Cooking zone switches off
Countdown timer
Cooking zones are not switched on
Acoustic signal
00 flashes
3 While
the countdown timer is activated, no
cooking zone can be used.
3 The countdown timer basically cannot be
used if a cooking zone is switched on.
3 If a cooking zone is switched off, the timer
function set is also switched off.
10
Selecting a cooking zone
Step
Control panel
Display
1.
Touch
TIMER once
Pilot light of the first cooking zone flashes
2.
Touch
TIMER once
Pilot light of the second cooking zone flashes
3.
Touch
TIMER once
Pilot light of the third cooking zone flashes
4.
Touch
TIMER once
Pilot light of the fourth cooking zone flashes
3 If the pilot light is flashing more slowly, the
heat setting can be set or modified.
3 If other timer functions are set, after a few seconds the shortest remaining time of all the timer
functions
is
displayed
and
the
corresponding pilot light flashes.
Setting the time
Step
Control panel
Indicator
1.
Select
TIMER cooking zone
Pilot light for the cooking zone selected flashes
2.
Touch
or
00 to 99 minutes
After a few seconds the pilot light flashes more slowly.
The time is set.
The time counts down.
Switching off the timer function
Step
Control panel
Indicator
1.
Select
Pilot light of cooking zone selected flashes faster
Time remaining is displayed
2.
Touch
TIMER cooking zone
The time remaining counts backwards to 00.
The pilot light goes out.
The Timer function for the selected cooking zone is switched off.
Changing the time
Step
Control panel
Indicator
1.
Select
TIMER cooking zone
Pilot light of the selected cooking zone flashes faster
Time remaining is displayed
2.
Touch
or
01 to 99 minutes
After a few seconds, the pilot light flashes more slowly.
The time is set.
The time counts down.
11
Displaying the time remaining for a cooking zone
Step
Control panel field
1.
Display
TIMER Select cooking zone
Pilot light of the cooking zone selected flashes faster
The time remaining is displayed
After a few seconds the pilot light flashes more slowly.
Switching off the acoustic signal
Step
Control panel field
Acoustic signal
1.
Touch
Acoustic signal to acknowledge.
TIMER
Acoustic signal stops.
Safety cut-out
Cooking surface
• If after switching on the cooking surface, a heat
setting is not set for a cooking zone within approx.
10 seconds, the cooking surface automatically
switches itself off.
• If one or more sensor fields are covered for longer
than approx. 10 seconds, e.g. by a pan placed
upon it, a signal sounds and the cooking surface
switches off automatically.
• If all cooking zones are switched off, the cooking
surface automatically switches itself off after approx. 10 seconds.
Control panel
3 Moisture (e.g. a wet cloth) or liquid boiling over
onto the control panel immediately switches
all cooking zones off.
Cooking zones
• If one of the cooking zones is not switched off after
a certain time, or if the heat setting is not modified,
the relevant cooking zone switches off automatically. _ is displayed. Before being used again, the
cooking zone must be set to 0.
Heat setting
Switches off after
V, 1 - 2
6 hours
3-4
5 hours
5
4 hours
6-9
1.5 hours
12
Tips on Cooking and Frying
3 Information on acrylamides
According to the latest scientific knowledge,
intensive browning of food, especially in products containing starch, can constitute a health
risk due to acrylamides. Therefore we recommend cooking at the lowest possible temperatures and not browning foods too much.
Cookware
• You can recognise good cookware from the bottoms of the pans. The bottom should be as thick
and flat as possible.
• Cookware made of enamelled steel or with aluminium or copper bottoms can leave discolorations on
the glass ceramic surface which are difficult or impossible to remove.
Energy saving
2
2
2
2
Always place cookware on the cooking zone
before it is switched on.
If possible, always place lids on the pans.
Switch cooking zones off before the end of the
cooking time, to take advantage of residual
heat.
Bottom of pans and cooking zones should be
the same size.
13
Examples of cooking applications
The information given in the following table is for guidance only.
Heat
setting
Cookingprocess
0
Cooking time
Tips/Hints
Residual heat, Off position
Keeping
food warm
Keeping cooked foods warm
as required
Cover
Melting
Hollandaise sauce,
melting butter, chocolate, gelatine
5-25 mins.
Stir occasionally
Solidifying
Fluffy omelettes, baked eggs
10-40 mins.
Cook with lid on
2-3
Simmering
on low heat
Simmering rice and milk-based
dishes
Heating up ready-cooked meals
25-50 mins.
Add at least twice as much
liquid as rice, stir milk dishes
part way through cooking
3-4
Steaming
Braising
Steaming vegetables, fish
braising meat
20-45 mins.
With vegetables add only a little liquid (a few tablespoons)
Steaming potatoes
20-60 mins.
Use only a little liquid, e. g.:
max. ¼ l water for
750 g potatoes
Cooking larger quantities of food,
stews and soups
60-150 mins.
Up to 3 l liquid plus ingredients
6-7
Gentle
Frying
Frying escalopes, veal cordon
bleu, cutlets, rissoles, sausages,
liver, roux, eggs, pancakes,
doughnuts
Steady frying
Turn halfway through cooking
7-8
Heavy
Frying
Hash browns, loin steaks, steaks,
Flädle (pancakes for garnishing
soup)
5-15 mins.
per pan
Turn halfway through cooking
9
Boiling
Searing
Deep frying
1
1-2
4-5
14
suitable for
Boiling
Boiling large quantities of water, cooking pasta, searing meat (goulash, pot roast),
deep frying chips
Cleaning and Care
1 Take care! Risk of burns from residual heat.
1 Warning! Sharp objects and abrasive cleaning
materials will damage the appliance. Clean
with water and washing up liquid.
1 Warning!
Residues from cleaning agents will
damage the appliance. Remove residues with
water and washing up liquid.
Cleaning the appliance after each use
1. Wipe the appliance with a damp cloth and a little
washing up liquid.
2. Rub the appliance dry using a clean cloth.
Removing deposits
1. Place a scraper on the glass ceramic surface at an
angle.
2. Remove residues by sliding the blade over the surface.
3. Wipe the appliance with a damp cloth and a little
washing up liquid.
4. Rub the appliance dry using a clean cloth.
Remove
immediately
when the appliance has
cooled down
sugar, food containing sugar
yes
---
plastics, tin foil
yes
---
limescale and water rings
---
yes
fat splashes
---
yes
shiny metallic discolorations
---
yes
Type of dirt
using
a scraper*
cleaner for glass ceramic
or stainless steel*
*Scrapers and cleaners for glass ceramic and stainless steel
can be purchased in specialist shops
3 Remove
stubborn residues with a cleaner for
glass ceramic or stainless steel.
3 Scratches
or dark stains on the glass ceramic
that cannot be removed do not however affect
the functioning of the appliance.
Metal décor strips
1 Warning!
Do not use vinegar, lemon juice or
lime slaking agents on the cooking surface's
décor strips, otherwise dull spots will result.
When cleaning do not introduce flat objects
(e.g. knives) under the décor strips, as otherwise these can possibly become detached.
15
1. Wipe metal décor strips with a damp cloth and a
little washing up liquid.
2. Soak dried on spillages with a wet cloth. Afterwards wipe off and rub dry.
What to do if …
Problem
The cooking zones will not switch
on or are not functioning
Possible cause
Remedy
More than 10 seconds have passed Switch the appliance on again.
since the appliance was switched
on
The child safety device is switched Deactivate the child safety device
on l
(See the section “Child safety device”)
Several sensor fields were touched Only touch one sensor field
at the same time
The sensor fields are partly covered Remove the cloth or the liquid.
by a damp cloth or with liquid
Switch the appliance on again.
The residual heat indicator is not
displaying anything
Safety cut-out has been triggered
Switch the appliance on again
The lock is switched on l
Switch off the lock (See the section
“Locking/unlocking the control
panel”)
The cooking zone was only on for a If the cooking zone is supposed to
short time and is therefore not hot be hot, call the Customer Service
Department.
The automatic warm up function is There is still residual heat on the
not switching itself on
cooking zone h
Let the cooking zone cool down
The highest heat setting is set Ç
The highest heat setting has the
same power as the automatic warm
up function
The heat setting was set using the
sensor field
1.Switching off the cooking zone
2.Set the cooking zone using the
sensor field
Acoustic signal sounds and appli- The On/Off sensor field has been
ance switches itself on and then off covered up, e.g. by a cloth
again; after 5 seconds another
acoustic signal sounds
Do not place any objects on the
control panel
_ is lit
Overheating protection for the
cooking zone has been triggered
Switch off the cooking zone.
Switch the cooking zone on again
Safety cut-out has been triggered
Switch off the cooking zone.
Switch the cooking zone on again
Electronics fault
Disconnect the appliance from the
electrical supply for a few minutes
(Take the fuse out of the house’s
wiring system)
If after switching on again, e is displayed again, call the customer
service department
e and number are displayed
If you are unable to remedy the problem by following the above suggestions, please contact
your dealer or the Customer Care Department.
16
1 Warning!
Repairs to the appliance are only to
be carried out by qualified service engineers.
Considerable danger to the user may result
from improper repairs.
3 If the appliance has been wrongly operated,
the visit from the customer service technician
or dealer may not take place free of charge,
even during the warranty period.
Disposal
2
Packaging material
2
Old appliance
The packaging materials are environmentally
friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<,
>PS<, etc. Please dispose of the packaging
materials in the appropriate container at the
community waste disposal facilities.
W
The symbol
on the product or on its packaging indicates that this product may not be
treated as household waste. Instead it shall be
handed over to the applicable collection point
for the recycling of electrical and electronic
equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed information about recycling of this product,
please contact your local city office, your
household waste disposal service or the shop
where you purchased the product.
17
Installation Instructions
Safety instructions
Sticking on the seal
The laws, ordinances, directives and standards in
force in the country of use are to be followed (safety
regulations, proper recycling in accordance with the
regulations, etc.)
Installation may only be carried out by a qualified
electrician.
The minimum distances to other appliances and
units are to be observed.
A protective floor must be installed under the appliance.
The cut surfaces of the worktop are to be protected
against moisture using a suitable sealant.
The sealant seals the appliance to the work top with
no gap.
Avoid installing the appliance next to doors and under windows. Otherwise hot cookware may be
knocked off the rings when doors and windows are
opened.
• Clean the worktop around the cut-out area.
• Stick the single-sided adhesive sealing tape provided on the underside of the hob around the outside edge ensuring that it is not stretched. The two
ends of the tape should join in the middle of one
side. After trimming the tape (allow it to overlap by
2-3 mm), press the two ends together.
1 WARNING!
Risk of injury from electrical current.
The electrical mains terminal is live.
Make electrical mains terminal free of voltage.
Observe connection schematic.
Observe electrical safety rules.
Ensure anti-shock protection through correct installation by a qualified electrician.
• The appliance must be connected to the electrical
supply by a qualified electrician.
•
•
•
•
•
1 IMPORTANT!
Risk of injury from electrical current.
Loose and inappropriate plug and socket connections can make the terminal overheat.
• Have the clamping joints correctedly installed by a
qualified electrician.
• Use strain relief clamp on cable.
• In the event of single-phase or two-phase connection, the appropriate mains cable of type H05BB-F
Tmax 90° (or higher) must be used.
• If this appliance’s mains cable is damaged, it must
be replaced by a special cable (type H05BB-F
Tmax 90°; or higher). The latter is available from
the Customer Care Department.
A device must be provided in the electrical installation which allows the appliance to be disconnected
from the mains at all poles with a contact opening
width of at least 3 mm.
Suitable isolation devices include line protecting cutouts, fuses (screw type fuses are to be removed from
the holder), earth leakage trips and contactors.
18
Assembly
19
20
21
Rating Plate
EHS 7631 P
55HDD62AO 230 V
949 591 205
50 Hz
6,9 kW
ELECTROLUX
22
Service
In the event of technical faults, please first check
whether you can remedy the problem yourself with
the help of the operating instructions (section “What
to do if…”).
If you were not able to remedy the problem yourself,
please contact the Customer Care Department or
one of our service partners.
In order to be able to assist you quickly, we require
the following information:
– Model description
– Product number (PNC)
– Serial number (S No.)
(for numbers see rating plate)
– Type of fault
– Any error messages displayed by the appliance
– three digit letter-number combination for glass ceramic
So that you have the necessary reference numbers
from your appliance at hand, we recommend that
you write them in here:
Model description:
.....................................
PNC:
.....................................
S No:
.....................................
23
822 930 192-A-201205-01
Subject to change without notice
The Electrolux Group. The world´s No.1 choice.
The Electrolux Group is the world´s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products
(such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx. USD 14 billion in more
than 150 countries around the world.
">