Panasonic SLSX285 Operating Instructions

Concerning Compact Discs
Only compact discs bearing this mark can be used with this unit.
However, continued use of irregular shaped CDs can damage the unit.
How to remove a disc from its
case
How to store the disc in its
case
Label side up
How to hold a disc
Portable CD player
Dear Customer
Thank you for purchasing this product.
For optimum performance and safety,
please read these instructions carefully.
Operating Instructions
Model No. SL-SX285
The model number and serial number
of this product can be found on either
the back or the bottom of the unit.
Please note them in the space provided below and keep for future reference.
SL-SX285
MODEL NUMBER
SERIAL NUMBER
Supplied Accessories
If the surface is dirty
Wipe it with a damp cloth and then wipe dry. Wipe from the center toward the outer
circumference.
Play surface
(shiny surface)
Handling precautions
≥If you are taking the CD from a cold to
a warm environment, moisture may
form on the CD. Wipe this off with a
soft, dry, lint-free cloth before using the
CD.
≥Do not write on the label side with a
ball-point pen or other writing instrument.
≥Do not use record cleaning sprays,
benzine, thinner, static electricity prevention liquids or any other solvent.
≥Do not attach labels or stickers to CDs.
(Do not use CDs with exposed adhesive from tape or left over peeled off
stickers.)
≥Do not use scratch-proof protectors
etc.
Storage precautions
Be sure to store CDs in their cases to
protect them from dust, scratches, and
warping.
Do not place or store CDs in the following places
≥Locations exposed to direct sunlight
≥Humid or dusty locations
≥Locations directly exposed to a heat
vent or heating appliance
≥In the glove compartment or on the
rear deck of an automobile
Check the packing carton for these accessories.
Stereo headphones . . . . . . . . . . . . . . . . . . . . . . . . 1
(RFEV716P-KS)
Wired remote control . . . . . . . . . . . . . . . . . . . . . . . 1
(N2QCBD000010)
Beltclip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
(RYQ0350-K)
Use numbers indicated in parentheses when asking for replacement parts.
To order accessories contact 1-800-332-5368 or web site
(http://www.panasonic.com).
Before connecting, operating or adjusting this product, please read these
instructions completely. Please keep this manual for future reference.
P
p
Panasonic Consumer Electronics Company, Division of
Matsushita Electric Corporation of America
One Panasonic Way Secaucus, New Jersey 07094
http://www.panasonic.com
Panasonic Sales Company, Division of Matsushita Electric of Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infantería, Km. 9.5 San Gabriel Industrial Park, Carolina, Puerto Rico 00985
c 2000 Matsushita Electric Industrial Co., Ltd.
RQT5849-P F1200KK0
Printed in Japan
Precautions
Before using this unit, be sure to read the applicable
items of the operating instructions and these safety suggestions carefully.
Afterwards keep them handy for future reference. Take
special care to follow the warnings indicated on the unit
itself as well as in the operating instructions.
Safety
1. Power Source—The unit should be connected to
power supply only of the type described in the operating instructions or as marked on the unit. Use only
the AC adaptor or car adaptor described in the operating instructions when recharging.
2. Polarization—If the unit is equipped with a polarized
AC power plug (a plug having one blade wider than
the other), that plug will fit into the AC outlet only one
way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the
plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
3. Care of AC adaptor—Take care that the cord of the
AC adaptor should be routed so that they are not
likely to be walked on or pinched by items placed
upon or against them. Never take hold of the AC
adaptor if your hand is wet, and always grasp the
plug body when connecting or disconnecting it.
4. Nonuse Periods—When not in use, be sure to disconnect the AC adaptor from the AC power outlet.
5. Batteries—If the set is not used for a long period of
time or is used only from an AC power source, remove all the batteries to prevent potential damage
due to possible battery leakage. Do not mix batteries
(old and new) or different types of batteries.
Installation
Maintenance
∫ Environment
(See page 7 for details.)
Clean the cabinet, panel and controls with a soft cloth
lightly moistened with mild detergent solution.
Do not use any type of abrasive pad, scouring powder
or solvent such as alcohol or benzine.
1. Water and Moisture—Do not use this unit near
water—for example, near a bathtub, washbowl,
swimming pool, or the like. Damp basements should
also be avoided.
2. Condensation—Moisture may form on the lens in
the following conditions...
2. ≥immediately after a heater has been turned on.
2. ≥in a steamy or very humid room.
2. ≥when the unit is suddenly moved from a cold environment to a warm one. If moisture forms inside
this unit, it may not operate properly. To correct this
problem wait about one hour for the moisture to
evaporate.
3. Heat—Never use or place this unit near a heat
source. Do not leave it in an automobile exposed to
direct sunlight for a long time with the doors and windows closed as this may deform the cabinet.
∫ Placement
1. Foreign Material—Care should be taken so that objects do not fall into and liquids are not spilled into
the unit. Do not subject this unit to excessive smoke,
dust, mechanical vibration, or shock.
2. Magnetism—The unit should be situated away from
equipment or devices that generate strong magnetic
fields.
3. Stacking—Do not place any objects, on top of the
unit.
4. Wall or Ceiling Mounting—The unit should not be
mounted to a wall or ceiling, unless specified in this
operating instructions.
Service
1. Damage Requiring Service—The unit should be
serviced by qualified service personnel when:
1. (a) The AC adaptor is damaged; or
1. (b) Objects have fallen or liquid has been spilled
into the unit; or
1. (c) The unit has been exposed to rain; or
1. (d) The unit does not appear to operate normally or
exhibits a marked change in performance; or
1. (e) The unit has been dropped, or the enclosure
damaged.
2. Servicing—The user should not attempt to service
the unit beyond that described in the operating instructions. All other servicing should be referred to
an authorized service personnel.
2. In the U.S.A., contact the Panasonic Customer
2. Call Center at 1-800-211-7262, or e-mail
2. [email protected], or web site
2. (http://www. panasonic.com).
2. In Canada, contact Panasonic Canada Inc.
2. Customer Care Centre at 905-624-5505, or web
2. site (www.panasonic.ca), or an authorized
2. Servicentre nearest you.
This manual was printed with soy based ink.
1
Power Supply Preparations
Refer to the specifications (page 8) for information on operating times when using rechargeable batteries or dry-cell batteries.
2
Using the AC adaptor
(not included)
Be sure to obtain the optional AC adaptor.
Optional AC adaptor: RP-AC46
3
Connect the AC adaptor.
DC IN jack (DC IN 4.5 V K)
Household
AC outlet
Back panel of the unit
(Refer to “Using the AC adaptor” for connection
instructions.) Recharging starts and the “H”
charging indicator flashes on the unit’s display.
When the rechargeable batteries fully recharge the
charging indicator disappears.
When recharging is complete, unplug the AC adaptor from the household AC outlet and the DC IN jack.
≥Never mix dry cell and rechargeable batteries.
≥Turn the unit off before replacing the rechargeable batteries.
Note!
AC adaptor
Conserving power
To save power when the unit is not to be used for a long
time, unplug the AC adaptor from the household AC
outlet. Reprogram tracks if necessary before use.
Note!
≥Turn the unit off before connecting or disconnecting
the AC adaptor.
Using rechargeable batteries
(not included)
Obtain the optional rechargeable batteries.
Make sure to recharge the batteries before using them.
The unit cannot be used to charge rechargeable batteries other than those specially designed for it.
Optional batteries : P-3GAVA/2B
Recharging procedure
1
Connect the AC adaptor.
≥Rechargeable batteries have a service life of approximately 300 charge-discharge cycles. The batteries
have reached the end of their operational life if they
last for a noticeably shorter time after recharging, or if
they cannot be recharged at all. Replace the batteries.
≥Recharging may only be performed when the unit is
powered off.
≥The AC adaptor and rechargeable batteries may become warm while recharging is in progress. This is not
a malfunction.
≥Leaving the AC adaptor connected can cause the batteries to go flat. After recharging the batteries, disconnecting the AC adaptor from the AC power outlet, ensure you disconnect the adaptor from the unit’s [DC IN
4.5 V K] terminal.
If the battery
comes loose
lid
Slide the lid back into
place horizontally.
Removing batteries
Push up on the battery in
the direction indicated by
the arrow. Then lift it out.
Insert the special rechargeable batteries into the unit.
2
1
3
+
Using dry cell batteries
(not included)
Battery indicator
Battery indicator
TRAIN
C S-XBSTRAIN
ALL1 M
RANDOM
SORRY
This indicator flashes when the batteries are almost out
of power. Power is cut off completely a short while later.
Rechargeable batteries: Recharge batteries.
Dry cell batteries: Replace batteries with new ones.
Note!
≥The length of time the unit will continue to operate between when the battery indicator starts flashing and
when the power is cut off differs depending on the
type of batteries used.
≥The battery indicator may not flash if rechargeable
batteries other than those designated by Panasonic
are used.
Using the car adaptor
(not included)
Be sure to obtain the car adaptor (SH-CDC9) available
as an optional accessory.
The car adaptor can be used to recharge the unit’s batteries while in the car.
CAUTION:
Use only car adaptor, Model: SH-CDC9 manufactured by Matsushita Electric Industrial Co.,Ltd.
If the unit malfunctions or freezes during use,
disconnect the power sources (the AC adaptor
and batteries).
Re-connect the power source and continue operation.
After disconnecting the AC adaptor, insert two “AA”
(LR6) alkaline batteries.
The procedure for inserting and removing dry cell batteries is identical to that for rechargeable batteries.
Note!
≥The dry cell batteries should be changed when the
unit is off.
HOLD Function
This function causes the unit to ignore
short, accidental button presses. (The
disc lid can still be opened and closed.)
The HOLD function prevents the
following:
≥The unit is powered on accidentally
when not in use, causing the batteries
to run down.
≥A button is accidentally pressed during
play, interrupting the operation.
HOLD
HOLD
To use the HOLD function
Set [HOLD] to the HOLD position.
HOLD mode
2
The unit and wired remote control have
HOLD functions, each of which works independently.
“(” indication
When the main unit is in HOLD mode,
pressing any button causes the indication “(” to appear on the display.
When the unit is powered off
The “(” indication appears only
when [1;] (main unit) is pressed.
Before operating the buttons
Be sure to move [HOLD] to release
the unit from the HOLD mode.
Sequential Play
4
Basic Play
5
Track number in play
VOL
VOL
C S-XBS TRAIN
ALL1 M
RANDOM
SORRY
VOL
Increase
VOL
C S-XBS TRAIN
ALL1 M
RANDOM
SORRY
1
Decrease
Elapsed playing time of each track
OPEN
Label must face upward.
OP
Plug type:
3.5 mm (1/8 in.) stereo
R
OF
3
F
HOLD
2
Close the lid
R
L
Follow steps 1–5.
Resume function
In step 2: Connect the stereo headphones and wired remote control to the headphone jack [Ë]. (Plug in firmly.)
In step 5: The volume range is 0-25. Press and hold to change the volume successively. The volume changes when
pressed while the level is displayed. If any other display is shown, it changes to show the current level.
(The volume returns to 10 when you disconnect the power source.)
≥Play stops automatically when all the tracks have been played.
≥If the unit has been connected to the car audio system, set this unit’s volume to 10, then adjust the volume level on
the system.
The player stores the track where you stopped play and
if you press [1 ;] (main unit) or [∫/1] (remote control),
play resumes from the beginning of the track.
The resume function is canceled (play starts from the
first track) if you open the lid when the unit is in stop
mode. It is also usually canceled when you replace the
CD while the unit is off.
Operation
Button
Display/reference
Press during play.
Press again to restart play.
To pause play
VOL
C S-XBS TRAIN
ALL1
Press during play.
M
Total number of tracks
To stop play
Note!
≥The resume function may work if you replace the CD
while the unit is off.
≥If you turned the unit off near the end of the track, play
may resume from the beginning of the next track.
≥The resume function works automatically and cannot
be turned off.
Removing discs
1
Press [∫,OPR OFF] to stop play and disc
rotation.
Slide [OPEN 1] to open the lid.
Press [PUSH] to release the disc.
VOL
OPR
Stop mode
O
FF
C S-XBS TRAIN
ALL1 M
RANDOM
Total playing time
Do not stop the disc by hand or try to remove it before it
stops rotating. This can damage CDs.
Press during stop mode.
To turn off the
unit Off mode
2
3
VOL
OPR
O
C S-XBS TRAIN
ALL1
M
FF
Press during play.
(Press [:] twice to skip to the
beginning of the previous tracks.)
Backward
Rapid forward/
backward
(search function)
Forward
Press and hold during play.
≥During program play (page 4), these buttons are
used to skip forward or backward through the
programmed sequence of tracks.
≥You cannot skip to tracks that have been played
in random or random repeat play (page 4).
≥During program play, 1-track repeat play, random
play and random repeat play (page 4), search operation is limited to the current track only.
For your reference:
“
” indication
This indication appears for about 30 seconds if [1;] (main unit) or [∫/1] (remote control) is pressed when no disc
is loaded in the unit or if the disc is not properly secured.
H
PUSH
Skip forward/
backward
(skip function)
PUS
Note!
Never insert foreign objects into the unit.
Auto power off function
If the unit is left in stop mode for approximately 10 minutes, the unit powers itself off automatically in order to
prevent the battery from running down.
(If no disc is loaded in the unit, it powers itself off in
about 30 seconds.)
“*” indication
Note on CD-R and CD-RW
This indication appears for about 10 minutes when the lid is opened. (However, the indication does not appear when
the unit is powered off.)
This unit can play CD-DA format audio CD-R and
CD-RW that have been finalized§ upon completion
of recording. It may not be able to play some CD-R
or CD-RW due to the condition of the recording.
Finalizing is a process that enables CD-R/CD-RW players
to play audio CD-R and CD-RW.
§
3
Other Play Methods
The letters such as A in the various illustrations refer to the descriptions in the “Location of Controls” section (see below).
Select the desired track.
∫ Press [MEMORY/RECALL] while the disc is playing.
(The number of the programmed tracks appear on
the display in sequence.)
OPR
∫ Press [∫,OPR OFF].
2
D
VOL
VOL
Repeat play/Random play
Beep
The setting switches in the sequence indicated below
each time [EQ] is pressed.
Press during play or stop mode.
S-XBS>TRAIN>Cancel (no indicator is shown)
^==========b
S-XBS:
E
FF
Program play
M
Up to 24 tracks can be entered in the programmed sequence.
Preparation: Put unit in stop mode.
O
DE
Select this setting to boost the low-range response.
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 `)( ----------------]
|
|
One track is repeated.
v
|
All-track repeat (`)
Select the desired track.
All the tracks on the disc are repeated. |
v
|
|
Random (RANDOM)
G
The tracks play once each in random
order and then play stops.
OPR
v
O
R
|
|
order.
(The indication “M” and the programmed sequence appear on the display.)
L
AL
EC
MEM
OR
Y/
|
|
|
Random repeat (RANDOM, `) |
The tracks play repeatedly in random |
FF
Register in sequence.
B
EQ
The repeat and random play modes are canceled after
steps 1 and 2.
OPR
O
Remote control
Note!
FF
F
v
Cancel (no indicator is shown) --------------}
When pressed during program play
VOL
The setting is switched in the sequence indicated below
each time [MODE] is pressed.
1-track repeat (1 ` M)(------------]
VOL
One track is repeated.
v
EQ
3
L
AL
EC
∫ To delete the entire programmed sequence
O
2
Main unit
∫ No more tracks can be programmed.
∫ To confirm the contents of the program
G
1
Press during play or stop mode.
∫ If “'” is displayed
EQ
1
Changing the sound quality
∫ After step 2, press [MEMORY/RECALL] the desired
number of times.
R
The disc plays from the specified track through to the
end, then play stops automatically.
Preparation: Put unit in stop mode.
∫ To program the same track in the sequence more than once
MEM
OR
Y/
Skip play
Repeat steps 1 and 2 to program all
the desired tracks.
4
Memory repeat (` M)
|
|
|
The programmed tracks are repeated. |
v
|
Cancel (M) -------------------------------------------}
TRAIN:
Select this setting to avoid annoying other passengers
with noise from your headphones while riding on the
train, or to reduce fatigue when listening for a long period of time.
Note!
The setting returns to S-XBS when you disconnect the
power source.
Anti-Skip System
This system deals with skipping in a variety
of ways:
≥An anti-skip mechanism prevents skipping caused
when play speed changes due to swinging of the unit.
≥A recovery system immediately returns the laser pickup to its original position if it is knocked off the track by
a strong shock.
≥The 40-second anti-skip memory fills in interruptions
caused by bumps and vibrations.
The anti-skip system works automatically while the
system is on and cannot be canceled.
When bumps continue repeatedly
The message “SORRY” appears on the display and
sound is interrupted.
Note!
≥You can select the first track to play in random play
and random repeat play by pressing [9] while the
disc is stopped. All the tracks are played.
≥You cannot select random play or random repeat play
during program play.
≥The mode is canceled when you disconnect the power
source.
F
OPR
O
FF
VOL
A
C S-XBS TRAIN
ALL1 M
RANDOM
SORRY
Note!
The anti-skip memory compresses digital signals.
Location of Controls
A
A B
C
D
C
E
F
I
G
H
B
G
J
L
Back panel of
the unit
M
AB C
D
H
4
K
GF E
N
Portable CD Player A
Wired remote control B
A Display
B Memory/recall button
(MEMORY/RECALL)
C Headphone volume control
buttons (VOL i,j)
D EQ button (EQ)
E Mode button (MODE)
F Play/pause button (1;)
G Skip/search buttons
(:, 9 6 , 5)
H Stop/operation off button
(∫,OPR OFF)
I Hold switch (HOLD)
J Headphone jack (Ë)
K CD release button (PUSH)
L Open switch (OPEN 1)
M Hole for car mounting base
/beltclip
N DC IN jack
(DC IN 4.5 V K)
A Skip/search buttons
(:, 9)
B Play/stop/operation off button
(∫/1)
C Volume control buttons
(j,VOL,i)
D Earphone jack
E Clip
F Hold switch (HOLD)
G EQ button (EQ)
H Plug
Using the Wired Remote Control
The remote control can be operated regardless of the
HOLD mode of the unit.
Basic operation
Preparation:
Press during play.
Press once during off or stop mode.
Release the remote control from the HOLD mode.
Skipping
tracks
To start play
(Press [:] twice to skip to the beginning of
the previous tracks.)
Backward
(Beep Beep Beep)
(Beep)
Press once during play.
HOLD
Forward
(Beep Beep)
Searching
through tracks
To stop play
Press and hold during play.
∫ Operation confirmation tones
» When an operation button is pressed, a confirmation
(Beep...Beep)
tone sounds. Refer to the parentheses in the illustration for the different types of confirmation tones.
Press and hold during play or stop
mode.
To turn off
the unit
To adjust the
volume
Decrease
(Beep)
VOL
Increase
(Beep)
≥The volume range is 0–25. (Press and hold
to change the volume successively.)
≥A tone (beep-beep) sounds when you
reach the minimum or maximum volume.
(Beep...Bee...p)
Other operations
To change sound quality
See page 4.
Using the Unit with Optional Accessories
Using the unit with a car audio
system
Using the unit with an audio system
For your reference:
Items to be purchased
For connection to the car audio system
Car stereo cassette adaptor (SH-CDM10A)
Other equipment
Connect the car stereo cassette adaptor to the
unit’s headphone jack.
(When doing this, set this unit’s volume to 10.)
(White) L
Bracket
Screwdriver
1Remove the screw from
the bracket at the rear
of the car mounting
base.
2Replace the screw in the
lower hole of the bracket.
Note!
≥When you switch off the car, volume and sound quality
may return to the original settings and the resume
function may work even if you change the disc.
≥It may not be possible to use the unit with some types
of car stereos owing to restrictions imposed by the
construction of the car stereo cassette adaptor.
For further details, refer to the instructions of the part
concerned.
Note!
CD or AUX
For securing the unit and connecting the power
supply:
≥Car adaptor (SH-CDC9)
≥Car mounting kit (SH-CDF20)
Note when using the car mounting kit (SH-CDF20)
(Red)
R
Do not connect the cable to the PHONO terminals on
an amplifier.
Headphone jack(Ë)
Wired remote control
Stereo connection
cable
(not included)
Turn off this unit and the other equipment before operation.
1
Connect the remote control to the unit's
headphone jack.
2
Connect the stereo connection cable to
the remote control's headphone jack and
the terminals on the other unit.
The unit may malfunction if you connect this cable
directly to the unit.
3
Set the volume to 10.
Make further volume adjustments with the other
unit.
4
Control play with the buttons on the main
unit.
The tone will be heard if you use the buttons on the
remote control.
5
≥Obtain the optional connecting cable if the other equipment comes with mini-phone jacks.
≥If you connect speakers (active or otherwise) directly to
the unit's headphone jack, ensure they have an impedance of 1 k≠ or less.
RQT5849
Panasonic Consumer Electronics
Company, Division of Matsushita
Electric Corporation of America
One Panasonic Way,
Secaucus, New Jersey 07094
Limited Warranty
Panasonic Consumer Electronics Company or Panasonic
Sales Company (collectively referred to as “The warrantor”) will
repair or replace this product with new or refurbished equivalent
product, free of charge, in the U.S.A. or Puerto Rico from the
date of original purchase in the event of a defect in materials or
workmanship as follows:
For one (1) year—Radio, Clock Radio, Radio with Tape
Player or Recorder, Speaker
For ten (10) days—Batteries—(when applicable)—New rechargeable batteries in exchange for defective rechargeable
batteries. Non-rechargeable batteries are not warranted.
For ninety (90) days—SD Memory Card—New SD card of the
same memory capacity in exchange for a defective SD Card for
ninety (90) days.
For assistance in the U.S.A. in obtaining service contact:
Panasonic Services Company
Panasonic PLUS Department
20421 84th Avenue South
Kent, WA 98032
Phone: 1-800-833-9626
FAX: 1-800-237-9080
If service is needed during the warranty period the purchaser
will be required to furnish a sales receipt/proof of purchase indicating date of purchase.
Also, the purchaser will be responsible for shipping the unit to
the above address. This warranty is extended only to the original purchaser.
For assistance in Puerto Rico contact, Panasonic Sales
Company at the address or telephone number above.
Panasonic Sales Company, Division
of Matsushita Electric
of Puerto Rico, Inc. (“PSC”)
Ave. 65 de Infantería, Km. 9.5
San Gabriel Industrial Park
Carolina, Puerto Rico 00985
Tel. (787) 750-4300
FAX. (787) 768-2910
This warranty only covers failures due to defects in materials
or workmanship which occur during normal use and does not
cover damage which occurs in shipment or failures which are
caused by products not supplied by the warrantor or failures
which result from accident, misuse, abuse, neglect, mishandling, misapplication, faulty installation, set-up adjustments, improper maintenance, alteration, improper antenna, inadequate
signal pick-up, maladjustment of consumer controls, modification, line power surge, or commercial use of the product, or
damage that is attributable to acts of God, or service by anyone
other than a PASC Factory Servicenter.
LIMITS AND EXCLUSIONS
There are no express warranties except as listed above.
THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT, OR ARISING OUT OF ANY
BREACH OF THIS WARRANTY, INCLUDING WITHOUT LIMITATION, DAMAGE TO TAPES, RECORDS OR DISCS. ALL
EXPRESS AND IMPLIED WARRANTIES, INCLUDING THE
WARRANTIES OF MERCHANTABILITY, ARE LIMITED TO
THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
Some states do not allow the exclusion or limitation of incidental
or consequential damages, or limitations on how long an implied
warranty lasts, so the above exclusions or limitations may not
apply to you.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state.
If a problem with this product develops during or after the warranty period, you may contact your dealer or Panasonic PLUS
Department. If the problem is not handled to your satisfaction,
then write to the Consumer Affairs Department at the company
address indicated above.
If you ship the product
Carefully pack and send it prepaid, adequately insured and preferably in the original carton.
Attach a letter, detailing the complaint, to the outside of the carton.
Do NOT send the product to the Executive or Regional Sales offices. They are NOT equipped to
make repairs.
Customer’s Record
Model
No.
Dealer’s
Name
Serial
No.
or
Code
No.
Date
of
Purchase
6
Dealer’s
Address
Attaching the Beltclip
Attach the included beltclip to make it easier to carry while jogging.
RC
RB
RC
4 Screw in the direction indicated.
RB
1 Insert the flange on the beltclip into the slot on the base
of the unit.
2 Press the beltclip firmly
against the base.
The product you have purchased is powered by a nickel-cadmium battery which is recyclable. Please call 1-800-8-BATTERY for information
on how to recycle this battery.
Ni-Cd
Beltclip
CAUTION!
THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY
RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
5 Clip on to your belt.
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT EXPOSE THIS APPLIANCE TO RAIN,
SPLASHING, DRIPPING OR MOISTURE.
3 Fit the screw into the hole in
the unit.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
≥Reorient or relocate the receiving antenna.
≥Increase the separation between the equipment and receiver.
≥Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
≥Consult the dealer or an experienced radio/TV technician for help.
Any unauthorized changes or modifications to this equipment would void the
user’s authority to operate this device.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Maintaining the Lens
Open the lid and clean the lens as
shown in the figure.
Use a cotton swab to gently wipe
off any finger-prints.
Recommended product:
Lens cleaner kit (SZZP1038C)
Product Service
Do not attempt to remove the cover(s) or repair the unit yourself. Refer servicing to
qualified personnel only.
Lens
Air blower for
camera lens
For product service, product information or assistance with product operation, refer to
the servicenter directory.
Lens
7
Product information
Specifications
Audio
No. of channels: 2 (left and right, stereo)
Frequency response:
20 to 20,000 Hz
(i0 dB to j7 dB)
DA converter:
1 bit, MASH
Headphone
output level: RMS max. 8 mWi8 mW/
16 ≠ (adjustable)
Pickup
Light source:
Semiconductor laser
Wavelength:
780 nm
General
Operational temperature
range:
0 eC–40 eC
(32 eF–104 eF)
Rechargeable temperature
range:
5 eC–40 eC
(41 eF–104 eF)
Power supply:
DC 4.5 V with optional
AC adaptor RP-AC46
Troubleshooting Guide
Play time:
[When used in hold mode with EQ
canceled, at 25 eC (77 eF), on a flat,
stable surface]
Batteries used
Before requesting service, make the below checks. If you are in doubt about some of
the check points, or if the remedies indicated in the chart do not solve the problem,
contact the Panasonic Customer Call Center at 1-800-211-7262, or e-mail [email protected], or web site (http://www. panasonic.com).
Problem
Play time
2 alkaline batteries
About 35 hours
2 optional rechargeable
batteries
(P-3GAVA/2B)
About 15 hours
≥The play time may be less depending
on the operating conditions.
≥Play time will be considerably reduced
when playing CD-RW.
Recharging time:
About 5 hours
Dimensions
(WaHaD):
128a25.9a131.5 mm
(51⁄16za11⁄32za53⁄16z)
Mass:
235 g (8.2 oz.) (with batteries)
187 g (6.6 oz.) (without batteries)
Note:
Specifications are subject to change
without notice.
Mass and dimensions are approximate.
Check this
Cannot close the lid.
Is the disc properly secured in place?
Cannot play discs.
≥Is the unit in HOLD mode?
≥Is the disc properly secured in place?
≥Is there condensation on the lens?
(Wait for about an hour and then try again.)
≥Is the disc dirty or scratched?
Tracks on disc do not
play in order, starting
with the first track.
≥Is the random play mode on?
≥Did you stop play in the middle of the disc last
time?
Cannot hear music—
too noisy.
≥Are the headphone and wired remote control plugs
inserted all the way?
≥Are the plugs dirty? (Wipe away dirt on plug.)
≥Separate the unit from mobile phones.
TV picture is distorted.
Radio reception is
noisy.
Are you using the unit too near a TV or tuner?
(Keep the unit away from the TV or tuner.)
Cautions
Listening caution
EST. 1924
Do not play your headphones or earphones at a high
volume. Hearing experts advise against continuous extended play.
If you experience a ringing in your ears, reduce volume
or discontinue use.
Do not use while operating a motorized vehicle. It may
create a traffic hazard and is illegal in many areas.
You should use extreme caution or temporarily discontinue use in potentially hazardous situations.
Even if your headphones or earphones are the open-air
type designed to let you hear outside sounds, don’t turn
up the volume so high that you can’t hear what’s around
you.
Sound can be deceiving. Over time your hearing “comfort level” adapts to higher volumes of sound. So what
sounds “normal” can actually be loud and harmful to
your hearing.
Guard against this by setting your equipment at a safe
level BEFORE your hearing adapts.
To establish a safe level:
≥Start your volume control at a low setting.
≥Slowly increase the sound until you can hear it comfortably and clearly, and without distortion.
Once you have established a comfortable sound level:
≥Leave it there.
Discontinue use if you experience discomfort with
the headphones or any other parts that directly contact your skin. Continued use may cause rashes or
other allergic reactions.
8
Selection and care of rechargeable /dry cell batteries
∫ Selection
∫ Care
As a safety precaution, the portable CD players made
by Panasonic are constructed so it is impossible to
recharge ordinary batteries.
Only batteries especially designed for this unit can be
recharged.
Special rechargeable Ni-Cd batteries:
To prevent battery damage, electrolyte leakage and
short-circuiting, heed the following points.
≥Do not peel off the covering on batteries and do not
use if the covering has been peeled off.
≥Align the poles + and - correctly when inserting the
batteries.
≥Do not mix different types of batteries or old and new
batteries.
≥Remove the batteries if you do not intend to use the
unit for a long time.
≥Do not throw into fire, short-circuit, disassemble, or
subject to excessive heat.
≥Do not attempt to recharge dry cell batteries.
≥Do not allow metal objects to touch the battery terminals as this may cause short-circuiting which is dangerous.
≥When carrying batteries in a pocket or bag, ensure no
metal objects such as necklaces are placed together
with them. Contact with metal may cause short-circuiting which can cause a fire. For safety, carry the
rechargeable batteries in the battery carrying case.
P-3GAVA/2B (set of 2)
For details, check with your dealer.
Special rechargeable
batteries
Ordinary dry cell
batteries/rechargeable
batteries
≥If rechargeable battery play time is short after recharging, the batteries have reached the end of their service
life. Replace them with the recommended replacements.
≥Play time may be shorter than usual after recharging
batteries for the first time or after they have been unused for a long time. Repeatedly recharge and discharge the batteries if this occurs to restore them to
normal.
When driving a car
In the interest of traffic safety, do not operate the unit
while driving.
">