ELECTROLUX-REX TT803 User Manual

TT 803
................................................ .............................................
EN DISHWASHER
USER MANUAL
2
www.electrolux.com
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
BEFORE FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
HINTS AND TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
TECHNICAL INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it
decades of professional experience and innovation. Ingenious and stylish, it has been designed
with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great
results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com
Register your product for better service:
www.electrolux.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
1.
3
SAFETY INSTRUCTIONS
Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible if an incorrect installation and
use causes injuries and damages. Always
keep the instructions with the appliance
for future reference.
1.1 Children and vulnerable
people safety
WARNING!
Risk of suffocation, injury or permanent disability.
• Do not let persons, children included,
with reduced physical sensory, reduced
mental functions or lack of experience
and knowledge use the appliance. They
must have supervision or instruction for
the operation of the appliance by a person who is responsible for their safety.
• Do not let children play with the appliance.
• Keep all packaging away from children.
• Keep all detergents away from children.
• Keep children and pets away from the
appliance door when it is open.
1.2 Installation
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Do not install or use the appliance
where the temperature is less than 0
°C.
• Obey the installation instruction supplied with the appliance.
• Make sure that the appliance is installed
below and adjacent to safe structures.
Electrical connection
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Should the appliance power supply cable need to be replaced, this must be
carried out by our Service Centre.
• Connect the mains plug to the mains
socket only at the end of the installation. Make sure that there is access to
the mains plug after the installation.
• Do not pull the mains cable to disconnect the appliance. Always pull the
mains plug.
• Do not touch the mains cable or the
mains plug with wet hands.
• This appliance complies with the E.E.C.
Directives.
Water connection
• Make sure not to cause damage to the
water hoses.
• Before you connect the appliance to
new pipes or pipes not used for a long
time, let the water flow until it is clean.
• The first time you use the appliance,
make sure that there is no leakage.
• The water inlet hose has a safety valve
that prevents the hose to loosen. To
disconnect the hose, press the lever (B)
and turn the fastener (A) counterclockwise.
A
B
WARNING!
Risk of fire and electrical shock.
• The appliance must be earthed.
• Make sure that the electrical information
on the rating plate agrees with the power supply. If not, contact an electrician.
• The water inlet hose has an external
transparent sheath. If the hose is damaged, the water in the hose becomes
dark.
• If the water inlet hose is damaged, immediately disconnect the mains plug
4
www.electrolux.com
from the mains socket. Contact the
Service to replace the water inlet hose.
1.3 Use
• This appliance is intended to be used in
household and similar applications such
as:
– Staff kitchen areas in shops, offices
and other working environments
– Farm houses
– By clients in hotels, motels and other
residential type environments
– Bed and breakfast type environments.
WARNING!
Risk of injury, burns, electrical
shock or fire.
• Do not change the specification of this
appliance.
• Put knives and cutlery with sharp points
in the cutlery basket with the points
down or in a horizontal position.
• Do not keep the appliance door open
without supervision to prevent to fall on
it.
• Do not sit or stand on the open door.
• Dishwasher detergents are dangerous.
Obey the safety instructions on the detergent packaging.
• Do not drink and play with the water in
the appliance.
• Do not remove the dishes from the appliance until the programme is completed. There can be detergent on the
dishes.
• The appliance can release hot steam if
you open the door while a programme
operates.
• Do not put flammable products or items
that are wet with flammable products
in, near or on the appliance.
• Do not use water spray and steam to
clean the appliance.
1.4 Disposal
WARNING!
Risk of injury or suffocation.
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the appliance.
ENGLISH
2. PRODUCT DESCRIPTION
2
1
11
10
9
8
7
6
5 4
3
1 Upper spray arm
7 Rinse aid dispenser
2 Lower spray arm
8 Detergent dispenser
3 Filters
4 Rating plate
9 Cutlery basket
10 Lower basket
5 Salt container
11 Upper basket
6 Air vent
3. CONTROL PANEL
1
2
3
Auto Off
1 On/off button
4 Delay button
2 Programme buttons
5 Indicators
3 TimeSaver button
Indicators
Description
3h
3 hours indicator.
6h
6 hours indicator.
Multitab
Multitab indicator.
4
5
5
6
www.electrolux.com
Indicators
Description
Salt indicator. It is always off while the programme operates.
Ammollo
Ammollo programme indicator.
End indicator.
4. PROGRAMMES
Important
Use the same button to select the Rapido 30’ programme and the Ammollo programme.
• Press the button 1 time to select Rapido 30’, the indicator of the button comes on.
• Press the button 2 times to select Ammollo, the Ammollo indicator comes on.
Programme
Degree of soil
Type of load
Programme
phases
Options
Eco 50° 1)
Normal soil
Crockery and cutlery
Prewash
Wash 50 °C
Rinses
Dry
TimeSaver
Intensivo 70° 2)
Heavy soil
Crockery, cutlery,
pots and pans
Prewash
Wash 70 °C
Rinses
Dry
TimeSaver
Rapido 30’ 3)
Fresh soil
Crockery and cutlery
Wash 60 °C
Rinse
Ammollo 4)
All
Prewash
AutoFlex 45°-70° All
5)
Crockery, cutlery,
pots and pans
Prewash
Wash from 45 °C to
70 °C
Rinses
Dry
1) With this programme you have the most efficient use of water and energy consumption for
crockery and cutlery with normal soil. (This is the standard programme for test institutes).
2) This programme has a high temperature rinsing phase for better hygiene results. During the
rinsing phase, the temperature stays at 70 °C for at least 10 minutes.
3) With this programme you can wash a load with fresh soil. It gives good washing results in a
short time.
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond
on the dishes and bad odours to come out from the appliance.
Do not use detergent with this programme.
5) The appliance senses the degree of soil and the quantity of items in the baskets. It
automatically adjusts the temperature and quantity of the water, the energy consumption
and the programme duration.
ENGLISH
7
Consumption values
Programme1)
Duration
(min)
Energy
(kWh)
Water
(l)
Eco 50°
173
1.03
10
Intensivo 70°
150 - 160
1.4 - 1.6
13 - 14
Rapido 30’
30
0.9
9
Ammollo
14
0.1
4
AutoFlex 45°-70°
40 - 150
0.6 - 1.5
7 - 14
1) The pressure and the temperature of the water, the variations of the mains supply, the
options and the quantity of dishes can change the values.
Information for test institutes
For all the necessary information for test performance. send an email to:
[email protected]
Write down the product number (PNC) that is on the rating plate.
5. OPTIONS
Activate or deactivate the options
before the start of a programme.
You cannot activate or deactivate
the options while a programme
operates.
If one or more options are set,
make sure that the related indicators are on before the programme
starts.
5.1 TimeSaver
This option increases the pressure and
the temperature of the water. The washing and drying phases are shorter. The total programme duration decreases by approximately 50%.
The washing results are the same as with
the normal programme duration. The drying results can decrease.
How to activate the TimeSaver option
1. Press TimeSaver. The related indicator comes on. In the display you can
see the update of the programme duration.
• If the option is not applicable to the
programme, the related indicator
flashes quickly 3 times and then
goes off.
5.2 Multitab
Activate this option only when you use the
combi detergent tablets.
This option deactivates the use of rinse
aid and salt. The related indicators stay
off.
The programme duration can increase.
How to activate the Multitab option
1. Press and hold, at the same time, AutoFlex and TimeSaver until the Multitab indicator comes on.
If you stop to use the combi
detergent tablets, before you start to
use separately detergent, rinse aid
and dishwasher salt, do these steps:
1. Set the water softener to the highest
level.
2. Make sure that the salt container and
the rinse aid dispenser are full.
3. Start the shortest programme with a
rinsing phase, without detergent and
without dishes.
4. Adjust the water softener to the water
hardness in your area.
5. Adjust the released quantity of rinse
aid.
8
www.electrolux.com
5.3 Acoustic signals
The acoustic signals operate when the
appliance has a malfunction or when the
adjustment of the level of the water softener occurs. It is not possible to deactivate these acoustic signals.
There is also an acoustic signal that operates when the programme is completed.
By default, this acoustic signal is off, but it
is possible to activate it.
How to activate the acoustic signal
for the end of programme
1. Press the on/off button to activate the
appliance. Make sure that the appliance is in setting mode, refer to “Setting and starting a programme”.
2. Press and hold, at the same time, Intensivo and Rapido until the indicators of Eco, Intensivo and Rapido start
to flash.
3. Press Rapido.
• The indicators of Eco and Intensivo
go off.
• The indicator of Rapido continues to
flash.
• The end indicator is off.
4. Press Rapido. The end indicator
comes on. The acoustic signal for the
end of programme is activated.
5. Press the on/off button to deactivate
the appliance and to confirm the setting.
How to deactivate again the acoustic
signal for the end of programme
1. Refer to “How to activate the acoustic
signal for the end of programme” and
follow the procedure from step (1) to
step (3).
2. Press Rapido.
• The indicators of Eco and Intensivo
go off.
• The indicator of Rapido continues to
flash.
• The end indicator comes on.
3. Press Rapido. The end indicator goes
off. The acoustic signal for the end of
programme is deactivated.
4. Press the on/off button to deactivate
the appliance and to confirm the setting.
6. BEFORE FIRST USE
1. Make sure that the set level of the water softener agrees with the water
hardness in your area. If not, adjust
the water softener. Contact your local
water authority to know the water
hardness in your area.
2. Fill the salt container.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the
appliance. Start a programme to remove them. Do not use detergent and
do not load the baskets.
6.1 Adjusting the water softener
Water softener
adjustment
Water hardness
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Electronic
47 - 50
84 - 90
8.4. - 9.0
58 - 63
10
43 - 46
76 - 83
7.6 - 8.3
53 - 57
9
37 - 42
65 - 75
6.5 - 7.5
46 - 52
8
29 - 36
51 - 64
5.1 - 6.4
36 - 45
7
23 - 28
40 - 50
4.0 - 5.0
28 - 35
6
ENGLISH
9
Water softener
adjustment
Water hardness
German
degrees
(°dH)
French
degrees
(°fH)
mmol/l
Clarke
degrees
Electronic
19 - 22
33 - 39
3.3 - 3.9
23 - 27
5 1)
15 - 18
26 - 32
2.6 - 3.2
18 - 22
4
11 - 14
19 - 25
1.9 - 2.5
13 - 17
3
4 - 10
7 - 18
0.7 - 1.8
5 - 12
2
<4
<7
< 0.7
<5
12)
1) Factory position.
2) Do not use salt at this level.
6.2 Electronic adjustment
1. Press the on/off button to activate the
appliance. Make sure that the appliance is in setting mode, refer to “Setting and starting a programme”.
2. Press and hold, at the same time, Intensivo and Rapido until the indicators of Eco, Intensivo and Rapido start
to flash.
3. Press Eco.
• The indicators of Intensivo and Rapido go off.
• The indicator of Eco continues to
flash.
• Intermittent acoustic signals and intermittent flashing of the end indicator refer to the current set level.
– E.g. 5 acoustic signals and 5
flashes + pause + 5 acoustic signals and 5 flashes = level 5.
4. Press Eco again and again to change
the setting. Each time you press Eco
the level number increases.
5. Press the on/off button to deactivate
the appliance and to confirm the setting.
6.3 Filling the salt container
1.
2.
3.
4.
5.
Turn the cap counterclockwise and
open the salt container.
Put 1 litre of water in the salt container (only for the first time).
Fill the salt container with dishwasher
salt.
Remove the salt around the opening
of the salt container.
Turn the cap clockwise to close the
salt container.
CAUTION!
Water and salt can come out from
the salt container when you fill it.
Risk of corrosion. To prevent it,
after you fill the salt container,
start a programme.
10 www.electrolux.com
6.4 Filling the rinse aid dispenser
1.
B
A
2.
3.
M AX
4
3 2
1
+
-
4.
C
D
Press the release button (D) to open
the lid (C).
Fill the rinse aid dispenser (A), no
more than the mark 'max'.
Remove the spilled rinse aid with an
absorbent cloth to prevent too much
foam.
Close the lid. Make sure that the release button locks into position.
You can turn the selector of the
released quantity (B) between position 1 (lowest quantity) and position 4 (highest quantity).
7. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate the
appliance. Make sure that the appliance is in setting mode, refer to ’Setting and starting a programme’.
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill the
rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
• If you use the combi detergent tablets, activate the Multitab option.
5. Set and start the correct programme
for the type of load and the degree of
soil.
7.1 Using the detergent
1.
B
2.
30
3.
MAX
+
32
C
-
1
20
4
A
4.
5.
Press the release button (B) to open
the lid (C).
Put the detergent in the compartment
(A) .
If the programme has a prewash
phase, put a small quantity of detergent on the inner part of the appliance door.
If you use detergent tablets, put the
tablet in the compartment (A).
Close the lid. Make sure that the release button locks into position.
ENGLISH
11
7.2 Setting and starting a
programme
Opening the door while the
appliance operates
The Auto Off function
If you open the door, the appliance stops.
When you close the door, the appliance
continues from the point of interruption.
To decrease the energy consumption, this
function automatically deactivates the appliance a few minutes after:
• You have not closed the door to start
the programme.
• The programme is completed.
Setting mode
For some settings it is necessary that the
appliance is in setting mode.
The appliance is in setting mode when,
after the activation, the indicator of Eco is
on.
If the control panel does not show this
condition, press and hold, at the same
time, Intensivo and Rapido until the indicator of Eco comes on.
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate the
appliance. Make sure that the appliance is in setting mode.
3. Press the button of the programme
you want to set. The related programme indicator comes on.
4. Close the appliance door. The programme starts.
Starting a programme with delay
start
1. Set the programme.
2. Press Delay again and again until the
indicator of the number of hours you
want to set comes on (3 or 6).
• The Delay indicator comes on.
3. Close the appliance door. The countdown starts.
• When the countdown is completed, the
programme starts.
Cancelling the delay start while
the countdown operates
When you cancel the delay start you have
to set the programme and options again.
1. Press and hold, at the same time Intensivo and Rapido until the indicator
of Eco comes on.
Cancelling the programme
1. Press and hold, at the same time Intensivo and Rapido until the indicator
of Eco comes on.
Make sure that there is detergent
in the detergent dispenser before
you start a new programme.
At the end of the programme
When the programme is completed, the
end indicator is on.
1. Press the on/off button or wait for the
Auto Off function to automatically deactivate the appliance.
2. Close the water tap.
Important
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless
steel becomes cool more quickly than
the dishes.
12 www.electrolux.com
8. HINTS AND TIPS
8.1 The water softener
Hard water contains a high quantity of
minerals that can cause damage to the
appliance and bad washing results. The
water softener neutralises these minerals.
The dishwasher salt keeps the water softener clean and in good conditions. It is
important to set the right level of the water
softener. This makes sure that the water
softener uses the correct quantity of dishwasher salt and water.
8.2 Using salt, rinse aid and
detergent
• Only use salt, rinse aid and detergent
for dishwasher. Other products can
cause damage to the appliance.
• The rinse aid helps, during the last rinsing phase, to dry the dishes without
streaks and stains.
• Combi detergent tablets contain detergent, rinse aid and other added agents.
Be sure that these tablets are applicable to the water hardness in your area.
Refer to the instructions on the packaging of the products.
• Detergent tablets do not fully dissolve
with short programmes. To prevent detergent residues on the tableware, we
recommend that you use the tablets
with long programmes.
Do not use more than the correct
quantity of detergent. Refer to the
instructions on the detergent
packaging.
8.3 Loading the baskets
Refer to the supplied leaflet with
examples of the load of the baskets.
• Only use the appliance to wash items
that are dishwasher-safe.
• Do not put in the appliance items made
of wood, horn, aluminium, pewter and
copper.
• Do not put in the appliance items that
can absorb water (sponges, household
cloths).
• Remove remaining food from the items.
• To remove easily remaining burned
food, soak pots and pans in water before you put them in the appliance.
• Put hollow items (cups, glasses and
pans) with the opening down.
• Make sure that cutlery and dishes do
not bond together. Mix spoons with
other cutlery.
• Make sure that glasses do not touch
other glasses.
• Put the small items in the cutlery basket.
• Put the light items in the upper basket.
Make sure that they do not move.
• Make sure that the spray arms can
move freely before you start a programme.
8.4 Before starting a
programme
Make sure that:
• The filters are clean and correctly installed.
• The spray arms are not clogged.
• The position of the items in the baskets
is correct.
• The programme is applicable for the
type of load and for the degree of soil.
• The correct quantity of detergent is
used.
• There is dishwasher salt and rinse aid
(unless you use combi detergent tablets).
• The cap of the salt container is tight.
ENGLISH
13
9. CARE AND CLEANING
WARNING!
Before maintenance, deactivate
the appliance and disconnect the
mains plug from the mains socket.
Dirty filters and clogged spray
arms decrease the washing results.
Make a check regularly and, if
necessary, clean them.
9.1 Cleaning the filters
C
1.
Turn the filter (A) counterclockwise
and remove it.
2.
To disassemble the filter (A), pull
apart (A1) and (A2).
Remove the filter (B).
Wash the filters with water.
Before you put the filter (B) back,
make sure that there are no residues
of food or soil in or around the edge
of the sump.
C
A
B
A1
3.
4.
5.
A2
6.
7.
Make sure that the filter (B) is correctly positioned under the 2 guides
(C).
Assemble the filter (A) and put it back
in filter (B). Turn it clockwise until it
locks.
An incorrect position of the filters
can cause bad washing results
and damage to the appliance.
9.2 Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
9.3 External cleaning
Clean the appliance with a moist soft
cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
9.4 Internal cleaning
If you regularly use short duration programmes, these can leave deposits of
grease and limescale inside the appliance.
To prevent this, we recommend to run
long duration programmes at least 2
times per month.
14 www.electrolux.com
10. TROUBLESHOOTING
The appliance does not start or it stops
during operation.
Before you contact the Service, refer to
the information that follows for a solution
to the problem.
With some problems, different indicators flash continuously or intermittently at the same time to show an
alarm code.
Alarm code
Problem
• The indicator of the set programme
flashes continuously.
• The end indicator flashes 1 time intermittently.
The appliance does not fill with water.
• The indicator of the set programme
flashes continuously.
• The end indicator flashes 2 times intermittently.
The appliance does not drain the water.
• The indicator of the set programme
flashes continuously.
• The end indicator flashes 3 times intermittently.
The anti-flood device is on.
WARNING!
Deactivate the appliance before
you do the checks.
Problem
Possible solution
You cannot activate the appliance.
Make sure that the mains plug is connected
to the mains socket.
Make sure that there is not a damaged fuse in
the fuse box.
The programme does not start.
Make sure that the appliance door is closed.
If the delay start is set, cancel the setting or
wait for the end of the countdown.
The appliance does not fill with
water.
Make sure that the water tap is open.
Make sure that the pressure of the water supply is not too low. For this information, contact your local water authority.
Make sure that the water tap is not clogged.
Make sure that the filter in the inlet hose is not
clogged.
Make sure that the inlet hose has no kinks or
bends.
The appliance does not drain the
water.
Make sure that the sink spigot is not clogged.
Make sure that the drain hose has no kinks or
bends.
ENGLISH
15
Problem
Possible solution
The anti-flood device is on.
Close the water tap and contact the Service.
After the checks are completed, activate
the appliance. The programme continues
from the point of interruption.
If the problem occurs again, contact the
Service.
If other alarm codes appear, contact the
Service.
10.1 If the washing and drying
results are not satisfactory
Whitish streaks or bluish layers on
glasses and dishes
• The released quantity of rinse aid is too
much. Adjust the rinse aid selector to a
lower position.
• The quantity of detergent is too much.
Stains and dry water drops on
glasses and dishes
• The released quantity of rinse aid is not
sufficient. Adjust the rinse aid selector
to a higher position.
• The quality of the detergent can be the
cause.
Dishes are wet
• The programme is without a drying
phase or with a low temperature drying
phase.
• The rinse aid dispenser is empty.
• The quality of the rinse aid can be the
cause.
• The quality of the combi detergent tablets can be the cause. Try a different
brand or activate the rinse aid dispenser and use rinse aid together with the
combi detergent tablets.
Refer to ‘HINTS AND TIPS’ for
other possible causes.
10.2 How to activate the rinse
aid dispenser
1. Press the on/off button to activate the
appliance. Make sure that the appliance is in setting mode, refer to “Setting and starting a programme”.
2. Press and hold, at the same time Intensivo and Rapido until the indicators of Eco, Intensivo and Rapido start
to flash.
3. Press Intensivo.
• The indicators of Eco and Rapido
go off.
• The indicator of Intensivo continues
to flash.
• The end indicator is off.
4. Press Intensivo. The end indicator
comes on. The rinse aid dispenser is
activated.
5. Press the on/off button to deactivate
the appliance and to confirm the setting.
6. Adjust the released quantity of rinse
aid.
7. Fill the rinse aid dispenser.
11. TECHNICAL INFORMATION
Dimensions
Width / Height / Depth (mm)
Electrical connection
Refer to the rating plate.
Voltage
Frequency
Water supply pressure
Min. / max. (bar / MPa)
Water supply 1)
Cold water or hot water2)
Capacity
Place settings
596 / 818 - 898 / 550
220-240 V
50 Hz
(0.5 / 0.05 ) / (8 / 0.8 )
max. 60 °C
12
16 www.electrolux.com
Power consumption
Left-on mode
0.10 W
Off-mode
0.10 W
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian
energy), use the hot water supply to decrease energy consumption.
12. ENVIRONMENT CONCERNS
Recycle the materials with the symbol
. Put the packaging in applicable
and electronic appliances. Do not dispose
appliances marked with the symbol
containers to recycle it.
Help protect the environment and human
health and to recycle waste of electrical
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
ENGLISH
17
18 www.electrolux.com
ENGLISH
19
117910461-A-212013
www.electrolux.com/shop