Electrolux EBCSL70CN User Manual

EBCSL70
................................................ .............................................
EN STEAM OVEN
USER MANUAL
2
www.electrolux.com
CONTENTS
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
PRODUCT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
BEFORE FIRST USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
CONTROL PANEL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
DAILY USE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
CLOCK FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
AUTOMATIC PROGRAMMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
USING THE ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
ADDITIONAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
CARE AND CLEANING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
WHAT TO DO IF… . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
GARANTIE, GARANZIA, GUARANTEE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with it
decades of professional experience and innovation. Ingenious and stylish, it has been designed
with you in mind. So whenever you use it, you can be safe in the knowledge that you’ll get great
results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com
Register your product for better service:
www.RegisterElectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
3
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible if an incorrect installation and use causes injuries and damages. Always keep the instructions with
the appliance for future reference.
1.1 Children and vulnerable people safety
WARNING!
Risk of suffocation, injury or permanent disability.
• This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they are supervised by an adult or a person who is responsible for their safety.
• Do not let children play with the appliance. Children under 3 years must not be left unsupervised in the vicinity
of the appliance.
• Keep all packaging away from children.
• Keep children and pets away from the appliance when
it operates or when it cools down. Accessible parts are
hot.
• If the appliance has a child safety device, we recommend that you activate it.
• Cleaning and user maintenance shall not be made by
children without supervision.
1.2 General Safety
• Only a qualified person must install this appliance and
replace the cable.
• Internally the appliance becomes hot when in operation. Do not touch the heating elements that are in the
appliance. Always use oven gloves to remove or put in
accessories or ovenware.
• Do not use a steam cleaner to clean the appliance.
4
www.electrolux.com
• Before maintenance cut the power supply.
• Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the glass door since they can scratch
the surface, which may result in shattering of the glass.
• To remove the shelf supports first pull the front of the
shelf support and then the rear end away from the side
walls. Install the shelf supports in the opposite sequence.
• If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
• Ensure that the appliance is switched off before replacing the lamp to avoid the possibility of electric shock.
2.
SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must install this appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the appliance.
• Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
• Do not pull the appliance by the handle.
• Keep the minimum distance from the
other appliances and units.
• Make sure that the appliance is installed
below and adjacent safe structures.
• The sides of the appliance must stay
adjacent to appliances or to units with
the same height.
Electrical connection
WARNING!
Risk of fire and electrical shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical information
on the rating plate agrees with the power supply. If not, contact an electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the
mains plug and to the mains cable.
Contact the Service or an electrician to
change a damaged mains cable.
• Do not let mains cables to come in
touch with the appliance door, specially
when the door is hot.
• The shock protection of live and insulated parts must be fastened in such a
way that it cannot be removed without
tools.
• Connect the mains plug to the mains
socket only at the end of the installation. Make sure that there is access to
the mains plug after the installation.
• If the mains socket is loose, do not
connect the mains plug.
ENGLISH
• Do not pull the mains cable to disconnect the appliance. Always pull the
mains plug.
• Use only correct isolation devices: line
protecting cut-outs, fuses (screw type
fuses removed from the holder), earth
leakage trips and contactors.
• The electrical installation must have an
isolation device which lets you disconnect the appliance from the mains at all
poles. The isolation device must have a
contact opening width of minimum 3
mm.
2.2 Use
WARNING!
Risk of injury, burns or electric
shock or explosion.
• Use this appliance in a household environment.
• Do not change the specification of this
appliance.
• Make sure that the ventilation openings
are not blocked.
• Do not let the appliance stay unattended during operation.
• Deactivate the appliance after each
use.
• Be careful when you open the appliance door while the appliance is in operation. Hot air can release.
• Do not operate the appliance with wet
hands or when it has contact with water.
• Do not apply pressure on the open
door.
• Do not use the appliance as a work
surface or as a storage surface.
• Always keep the appliance door closed
when the appliance is in operation.
• Open the appliance door carefully. The
use of ingredients with alcohol can
cause a mixture of alcohol and air.
• Do not let sparks or open flames to
come in contact with the appliance
when you open the door.
• Do not put flammable products or items
that are wet with flammable products
in, near or on the appliance.
WARNING!
Risk of damage to the appliance.
5
• To prevent damage or discoloration to
the enamel:
– do not put ovenware or other objects
in the appliance directly on the bottom.
– do not put aluminium foil directly on
the bottom of the appliance.
– do not put water directly into the hot
appliance.
– do not keep moist dishes and food in
the appliance after you finish the cooking.
– be careful when you remove or install
the accessories.
• Discoloration of the enamel has no effect on the performance of the appliance. It is not a defect in the sense of
the warranty law.
• Use a deep pan for moist cakes. Fruit
juices cause stains that can be permanent.
Steam Cooking
WARNING!
Risk of burns and damage to the
appliance.
• Do not open the appliance door during
steam cooking. Steam can release.
2.3 Care and Cleaning
WARNING!
Risk of injury, fire or damage to
the appliance.
• Before maintenance, deactivate the appliance and disconnect the mains plug
from the mains socket.
• Make sure the appliance is cold. There
is the risk that the glass panels can
break.
• Replace immediately the door glass
panels when they are damaged. Contact the Service.
• Be careful when you remove the door
from the appliance. The door is heavy!
• Clean regularly the appliance to prevent
the deterioration of the surface material.
• Remaining fat or food in the appliance
can cause fire.
• Clean the appliance with a moist soft
cloth. Only use neutral detergents. Do
not use abrasive products, abrasive
6
www.electrolux.com
cleaning pads, solvents or metal objects.
• If you use an oven spray, obey the safety instructions on the packaging.
• Do not clean the catalytic enamel (if applicable) with any kind of detergent.
• Only use lamps with the same specifications.
2.4 Internal light
• Disconnect the appliance from the
mains supply.
• Cut off the mains cable and discard it.
• Remove the door catch to prevent children and pets to get closed in the appliance.
• The type of light bulb or halogen lamp
used for this appliance, is only for
household appliances. Do not use it for
house lighting.
WARNING!
Risk of electrical shock.
2.5 Disposal
WARNING!
Risk of injury or suffocation.
• Before replacing the lamp, disconnect
the appliance from the power supply.
3. PRODUCT DESCRIPTION
1
2
1 Control panel
3
2 Water drawer
3 Electronic programmer
9
4
4 Grill and heating element
3
5
5 Lamp
2
6
6 Fan and heating element
1
7
8
7 Steam generator with cover
8 Shelf support, removable
9 Shelf positions
3.1 Accessories
CAUTION!
Do not use the baking tray or
deep pan with the Full Steam
function.
Wire shelf
For cookware, cake tins and roasts.
ENGLISH
7
Baking tray
For cakes and biscuits.
Glass dish with 2 grill inserts
Sponge
For absorbing residual water from the
steam generator.
4. BEFORE FIRST USE
WARNING!
Refer to the Safety chapters.
4.2 First Connection
4.1 Initial Cleaning
• Remove all parts from the appliance.
• Clean the appliance before first use.
Refer to chapter "Care and Cleaning".
When you connect the appliance to the
mains or after a power cut, you have to
set the language, display contrast, display
brightness and time of the day. Press
or
to set the value. Press OK to confirm.
5. CONTROL PANEL
Electronic programmer
1
2
3
4
5
6
7
8
9
10
11
8
www.electrolux.com
Use the sensor fields to operate the appliance
Sensor
field
Number
Function
Comment
ON / OFF
To activate and deactivate the appliance.
Heating Functions or Assisted
Cooking
To set a heating function or an Assisted
Cooking function. To set the necessary
function, touch the sensor field one or two
times after you activate the appliance. To
activate or deactivate the lamp, touch and
hold the sensor field for 3 seconds (you can
also activate the lamp after you deactivate
the appliance).
Favourite Programme
To save your favourite programmes to use
for a different time.
Temperature selection
To set the temperature or show the temperature in the appliance. To activate or deactivate the Fast Heat Up function, touch
and hold the sensor field for 3 seconds.
5
Down key
To move down in the menu.
6
Up key
To move up in the menu.
7
OK
To confirm the selection or settings.
Home key
To go back one level in the menu. To show
the main menu, touch the field for 3 seconds.
Time and additional functions
To set different functions. When a heating
function operates, touch the sensor field to
set the timer, Function Lock , Favourite
Programme memory, Heat + Hold or Set +
Go .
Minute Minder
To set the Minute Minder .
Display
It shows the settings of the appliance.
1
2
3
4
8
9
10
11
-
5.1 Display
A
B
C
E
D
A)
B)
C)
D)
E)
Heating function
Time of day
Heat up indicator
Temperature
Duration and End Time functions
ENGLISH
9
Other indicators in the display
Symbol
Function
Minute Minder
The function operates.
Time of day
The display shows the time of day.
Duration
The display shows the necessary time for cooking.
End Time
The display shows when the cooking time is
completed.
Time indication
The display shows how long a heating function
operates. Press
and
at the same time to
have the time go back to zero.
Heat up indicator
The display shows the temperature in the appliance.
Fast Heat Up Indicator
The function operates. This function decreases
the heat up time.
Weight Automatic
The display shows that the automatic weight
system operates or that you can change the
weight.
Heat + Hold
The function operates.
6. DAILY USE
WARNING!
Refer to the Safety chapters.
6.1 Navigating the menus
Operation of the menus:
1. Activate the appliance.
2.
Press
or
to select the menu
option.
3. Press OK to move to submenu or accept setting.
At every point you can get back to the
main menu with
.
6.2 The menus in overview
Main menu
Symbol
Menu item
Description
Heating Functions
It contains a list of heating functions.
Sous-vide cooking
It contains a heating function and a list
of automatic programmes.
Assisted Cooking
It contains a list of automatic programmes.
Favourite Programme
It contains a list of the favourite cooking programmes saved by the user.
10 www.electrolux.com
Symbol
Menu item
Description
Steam Cleaning
Procedure for cleaning with steam.
Basic Settings
It contains a list of other settings.
Specials
Contains a list of additional heating
functions.
Submenu for: Basic Settings
Symbol
Submenu
Application
Set Time of Day
It sets the current time on the clock.
Time Indication
When ON, the display shows the current time after you deactivate the appliance.
SET + GO
When ON, you can activate the function after you activate a heating function.
Heat + Hold
When ON, you can activate the function after you activate a heating function.
Extra time
It activates and deactivates the function.
Display Contrast
It adjusts the display contrast by degrees.
Display Brightness
It adjusts the display brightness by degrees.
Set Language
It sets the language for the display.
Buzzer Volume
It adjusts the volume of press-tones
and signals by degrees.
Key Tones
It activates and deactivates the tone of
the touch fields. It is not possible to
deactivate the tone of the ON / OFF
touch field.
Alarm/Error Tones
It activates and deactivates the alarm
tones.
Cleaning Assistant
Guides you through the cleaning procedure.
Service
It shows the software version and configuration.
Factory Settings
It resets all settings to factory settings.
ENGLISH
11
Submenu for: Sous-vide cooking
Symbol
Menu item
Description
Sous-vide cooking mode
It uses the steam for meat, fish, seafood, vegetables and fruits. Set the
temperature 50 °C — 95 °C.
Sous-vide recipes
It contains a list of automatic programmes.
Sous-vide cooking has its start in
the Sous-vide technology, which
in French means ‘under vacuum’.
The name refers to a method of
cooking in vacuum sealed plastic
pouches at low temperatures.
6.3 Heating functions
Submenu for: Heating functions
Heating function
Application
True Fan Cooking
To bake on up to 2 oven levels at the same
time and to dry food.
Moist Fan Baking
For energy-saving baking and cooking of
mainly dry bakery items as well as for baking in tins on one shelf position.
Slow Cooking
To prepare tender, succulent roasts.
Grilling
To grill flat food and to toast bread.
Turbo Grilling
To roast larger joints of meat or poultry on
one shelf position. Also to gratinate and to
brown.
Steam Regenerating
To reheat already cooked food directly on a
plate.
Quarter Steam + Heat
To bake bread, roast large pieces of meat
or to warm up chilled and frozen meals.
Half Steam + Heat
To steam dishes with a high moisture content and to poach fish, custard royale and
terrine.
Full Steam
To steam vegetables, fish, potatoes, rice,
pasta or special side-dishes.
Submenu for: Specials
Heating function
Bread Baking
Application
To bake bread.
12 www.electrolux.com
Heating function
Application
Au Gratin
For dishes such as lasagna or potato gratin.
Also to gratinate and to brown.
Dough Proving
For controlled rising of yeast dough before
baking.
Plate Warming
To preheat your plate for serving.
Preserving
To preserve vegetables in glasses and liquid
(e.g. mixed pickles).
Keep Warm
To keep food warm.
Defrost
To defrost frozen food.
6.4 Activating a heating function
1. Activate the appliance.
2. Select the Heating Functions menu.
Press OK to confirm.
3. Set the heating function. Press OK to
confirm.
4. Set the temperature. Press OK to
confirm.
6.
When the steam generator is
empty, an acoustic signal sounds.
When the appliance is cool, soak
up all remaining water from the
steam generator with the sponge.
If necessary, clean the steam generator with some vinegar.
Let the appliance dry fully with the
door open.
6.5 Steam cooking
The water drawer cover is in the
control panel.
1.
2.
Press the cover to open the water
drawer.
Fill the water drawer with 700 ml of
water.
The water supply is sufficient for approximately 30 minutes.
6.6 Sous-vide cooking
technique
1.
CAUTION!
Do not put water directly into the
steam generator!
3.
4.
5.
Use only water as the liquid. Do
not use filtered (demineralised) or
distilled water.
Activate the appliance.
Set the steam heating function and
temperature.
If necessary, set the function Duration
or End Time
.
The first steam shows after approximately 2 minutes. An acoustic signal
sounds when the appliance is at approximately the set temperature.
The signal sounds again at the end of
the cooking time.
Deactivate the appliance.
2.
3.
4.
5.
To prepare the food:
a) Clean and cut the ingredients.
b) Season the ingredients.
c) Fill the ingredients in suitable vacuum bags.
Vacuum seal the bag to make sure
that you remove as much air as possible.
Cold storage of the bags is mandatory in case the cooking procedure is
not done immediately.
Continue with the Sous-vide cooking
following applicable cooking table indications for the considered type of
food or the assisted cooking recipes.
Open the pouch and serve.
ENGLISH
6.
Optional: finish the food with a final
searing or grilling for e.g. meat to achieve a nice crust and the typical roast
flavour.
Primary advantages of the Sous-vide
cooking :
• With no evaporative losses of flavor volatiles and moisture, food keeps its full
aroma
• Tender texture of meat and fish
• Food keeps all minerals and vitamins
• Less spices are necessary as food
keeps its natural flavor
• Better workflow as it is not necessary to
prepare and serve food at the same
time and place
• Low cooking temperature minimizes the
risk of overcooking
• Portioning of the food makes it easy to
hold
Activating a Sous-vide cooking
mode
1.
2.
3.
4.
Activate the appliance.
Select the Sous-vide cooking menu.
Press OK to confirm.
Set the Sous-vide cooking mode .
Press OK to confirm.
Set the temperature. Press OK to
confirm.
6.7 Heat-up indicator
13
Fast Heat Up Indicator
This function decreases the heat-up time.
To activate the function, hold for 3 seconds. You will see the heat-up indicator
alternates.
Residual heat
When you deactivate the appliance, the
display shows the residual heat. You can
use the heat to keep the food warm.
6.8 Energy saving
The appliance contains features which help you save energy during everyday cooking:
• Residual heat:
– When the heating function or programme operates, the heating elements are deactivated 10% earlier
(the lamp and fan continue to operate). For this feature to operate, the
cooking time must be longer than 30
minutes or you must use the clock
functions ( Duration , End Time ).
– When the appliance is off, you can
use the heat to keep food warm. The
display shows the remaining temperature.
• Cooking with the lamp off - Touch
and hold for 3 seconds to deactivate
the lamp during cooking.
When you activate a heating function, the
bar on the display comes on. The bar
shows that the temperature increases.
7. CLOCK FUNCTIONS
Symbol
Function
Description
Minute Minder
To set a countdown (max 2 hours 30 minutes). This
function has no effect on the operation of the appliance. You can also activate it when the appliance is
to activate the function. Press
or
off. Use
to set the minutes and OK to start.
Duration
To set how long the appliance has to be in operation (max. 23 h 59 min).
14 www.electrolux.com
Symbol
Function
End Time
Description
To set the switch-off time for a heating function
(max. 23 h 59 min).
If you set the time for a clock function, the
time starts to count down after 5 seconds.
If you use the clock functions Duration and End Time , the appliance deactivates the heating elements after 90 % of the set time.
The appliance uses the residual
heat to continue the cooking
process until the time ends (3 - 20
minutes).
Setting the clock functions
Set a heating function.
1.
2.
3.
4.
Press
again and again until the
display shows the necessary clock
function and the related symbol.
Press
or
to set the necessary
time. Press OK to confirm.
When the time ends, an acoustic signal sounds. The appliance deactivates. The display shows a message.
Press a sensor field to stop the signal.
• With Duration and End Time you must
set the heating function and the temperature first. Then you can set the
clock function. The appliance deactivates automatically.
• You can use Duration and End Time at
the same time, if you want to automatically activate and deactivate the appliance on a given time later.
• When you use the Core Temperature
Sensor (if applicable), the Duration and
End Time functions do not work.
tivates after the baking or roasting procedure ends.
• You can activate or deactivate the function in the Basic Settings menu.
• Conditions for the function:
– The set temperature is more than 80
°C.
– The function Duration is set.
Activating the function
1. Activate the appliance.
2. Select the heating function.
3. Set the temperature above 80 °C.
4.
Press
again and again until the
display shows Heat + Hold . Press
OK to confirm.
When the function ends, an acoustic signal sounds.
The Heat + Hold function stays on if you
change the heating functions.
7.2 Extra Time
The Extra Time makes the heating function continue after the Duration ends.
• Applicable for all heating functions with
Duration or Weight Automatic .
• Not applicable for heating functions
with Core Temperature Sensor.
Activating the function:
1. When the cooking time ends, an
acoustic signal sounds. Press any
sensor field.
2. The display shows the message for
Extra Time for five minutes.
3.
7.1 Heat + Hold
The Heat + Hold function keeps prepared
food warm at 80 °C for 30 minutes. It ac-
8. AUTOMATIC PROGRAMMES
WARNING!
Refer to the Safety chapters.
4.
Press
to activate (or
to cancel).
Set the Extra Time period. Press OK
to confirm.
ENGLISH
8.1 Assisted Cooking with
Recipe Automatic
This appliance has a set of recipes you
can use. Recipes are fixed and you cannot change them.
Activating the function:
1. Activate the appliance.
2. Select the Assisted Cooking menu.
Press OK to confirm.
3. Select the category and dish. Press
OK to confirm.
4. Select Recipe Automatic . Press OK
to confirm.
When you use the Manual function, the appliance uses automatic
settings. You can change them as
with other functions.
15
Activating the function:
1. Activate the appliance.
2. Select Assisted Cooking . Press OK
to confirm.
3. Select the category and dish. Press
OK to confirm.
4. Select the Weight Automatic . Press
OK to confirm.
5.
Touch
or
to set the food
weight. Press OK to confirm.
The automatic programme starts. You
can change the weight at any time. Press
or
to change the weight. When
the time ends, an acoustic signal sounds.
Press a sensor field to deactivate the signal.
With some programmes turn over
the food after 30 minutes. The
display shows a reminder.
8.2 Assisted Cooking with
Weight Automatic
This function automatically calculates the
roasting time. To use it, it is necessary to
input the food weight.
9. USING THE ACCESSORIES
WARNING!
Refer to the Safety chapters.
9.1 Inserting the accessories
Baking tray:
Push the baking tray between the guide
bars of the shelf support.
16 www.electrolux.com
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
Wire shelf and baking tray together:
Push the baking tray between the guide
bars of the shelf support and the wire
shelf on the guide bars above.
• All accessories have small indentations
at the bottom of the right and left edges
to increase safety. Always make sure
that these indentations are at the rear of
the appliance. The indentations are also
anti-tip devices.
• The high rim around the shelf is a device which prevents cookware from
slipping.
10. ADDITIONAL FUNCTIONS
10.1 Favourite Programme
menu
You can save your favourite settings, like
duration, temperature or heating function.
They are available in the Favourite Programme menu. You can save 20 programmes.
Saving a programme
1. Activate the appliance.
2. Set a heating function or an Assisted
Cooking function.
3.
4.
5.
Touch
again and again until the
display shows SAVE . Press OK to
confirm.
The display shows the first free memory position.
Press OK to confirm.
Enter the name of the programme.
The first letter flashes.
or
Touch
Press OK.
6.
7.
to change the letter.
Touch
or
to move the cursor
to the right or to the left. Press OK.
The next letter flashes. Do steps 5
and 6 again as necessary.
Press and hold OK to save.
• You can overwrite a memory position.
When the display shows the first free
or
and
memory position, touch
press OK to overwrite an existing programme.
• To change the name of a programme,
select the Edit Programme Name submenu in the Favourite Programme
menu.
Activating the programme
Activate the appliance.
Select the Favourite Programme
menu. Press OK to confirm.
1.
2.
ENGLISH
3.
Select your favourite programme
name. Press OK to confirm.
to go to Favourite Programme
Press
directly. You can also use it when the appliance is deactivated (for selected models only).
10.2 Child Lock
10.4 SET + GO
The SET + GO function lets you set a
heating function (or programme) and use
it later with one press of the sensor field.
Activating the function:
1. Activate the appliance.
2. Set the heating function.
The Child Lock prevents an accidental
operation of the appliance.
3.
Activating and deactivating the Child
Lock function:
1. Activate the appliance.
4.
5.
2.
Touch
and
at the same time
until the display shows a message.
10.3 Function Lock
The Function Lock function prevents an
accidental change of the heating function.
You can activate the Function Lock function only when the appliance operates.
Activating the Function Lock function:
1. Activate the appliance.
2. Set a heating function or setting.
3.
4.
Press
again and again until the
display shows Function Lock function.
Press OK to confirm.
Deactivating the Function Lock
function:
1.
2.
17
Press
again and again until the
display shows Duration .
Set the time.
Press
again and again until the
display shows SET + GO .
6. Press OK to confirm.
To start SET + GO function, press any
sensor field (except for
). The set heating function starts.
When the heating function ends, an
acoustic signal sounds.
• When the heating function operates,
the Function Lock function is on.
• You can activate and deactivate the
SET + GO function in the Basic Settings menu.
10.5 Automatic switch-off
For safety reasons the appliance deactivates after some time:
• If a heating function operates.
• If you do not change the oven temperature.
Press
two times.
Press OK to confirm.
Oven temperature
Switch-off time
30 °C - 115 °C
12.5 h
120 °C - 195 °C
8.5 h
200 °C - 230 °C
The automatic switch-off works
with all functions, except Light ,
Duration and End Time .
10.6 Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
5.5 h
• Day brightness:
– When the appliance is activated.
– If you touch a sensor field during the
night brightness (apart from ON /
OFF), the display goes back to the
day brightness mode for the next 10
seconds.
– If the appliance is deactivated and
you set the function Minute Minder .
When the function ends, the display
goes back to the night brightness.
18 www.electrolux.com
10.7 Cooling fan
When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you deactivate the appliance, the cooling fan can
continue to operate until the appliance
cools down.
11. CARE AND CLEANING
WARNING!
Refer to the Safety chapters.
Notes on cleaning:
• Clean the front of the appliance with a
soft cloth with warm water and a cleaning agent.
• To clean metal surfaces, use a usual
cleaning agent.
• Clean the oven interior after each use.
Then you can remove dirt more easily
and it does not burn on.
• Clean all oven accessories after each
use and let them dry.
• If you have nonstick accessories, do
not clean them using aggressive
agents, sharp-edged objects or a dishwasher. It can cause a damage to the
nonstick coating.
11.1 Steam Cleaning
1.
Remove as much dirt as possible
manually.
Clean the inner door glass with a soft
cloth with warm water and a cleaning
agent.
CAUTION!
For a better performance you
should start the Steam Cleaning
function when the appliance is
cool. Check the residual heat.
Remove the shelf support to clean
the side walls.
2.
3.
4.
5.
6.
7.
Put 250 ml of water mixed with 3 tablespoons of vinegar (without herbs)
directly into the steam generator.
Activate the Steam Cleaning function
in the main menu. The duration of the
function is approximately 15 minutes.
The display shows the duration of the
function.
An acoustic signal sounds when the
programme is completed. Touch the
sensor field to deactivate the signal.
Wipe the internal surface of the appliance with a soft cloth.
Remove the remaining water from the
steam generator.
After cleaning keep the appliance
door open for approximately 1 hour.
Wait until the appliance is dry. To
speed up the drying you can heat up
the appliance with hot air at temperature 150 °C for approximately 15 minutes.
Always use the Steam Cleaning
function after cooking with steam.
You can get maximum effects of
the Steam Cleaning function if you
manually clean the appliance immediately after the Steam Cleaning function ends.
Use the Steam Cleaning function
two times if the level of dirt is high.
Make sure that the appliance is
cool before you activate the second cycle.
ENGLISH
19
11.2 Shelf supports
You can remove the shelf supports to
clean the side walls.
Removing the shelf supports
1. Pull the support up and out of the
front catch carefully.
Installing the shelf supports
To install the shelf support follow the procedure in the opposite order.
11.3 Steam generation system
CAUTION!
Dry the steam generator after
each use. Soak up water with the
sponge.
Remove the limescale residue
with water and vinegar.
CAUTION!
Chemical de-scaling agents can
cause damage to the enamel. Follow the instructions of the manufacturer.
2.
Pull the front end of the shelf support
away from the side wall.
3.
Pull the support out of the rear catch.
Cleaning the water drawer and the
steam generator:
1. Put the water and vinegar mixture
(approximately 250 ml) through the
water drawer into the steam generator.
Wait for approximately 10 minutes.
2. Remove the water and vinegar with
the sponge.
3. Put clean water (100 - 200 ml) into
the water drawer to flush the steam
generation system.
4. Remove water from the steam generator with the sponge and rub dry.
5. Keep the door open to let the appliance dry fully.
20 www.electrolux.com
11.4 Removing / inserting the
door
Remove the door to clean the inner side
of the appliance.
CAUTION!
Put the door with the outer side
down on a soft and level surface
to prevent scratches.
WARNING!
Pull the door away from the appliance. The door is heavy!
Removing the door
1. Open the door as far as it goes.
2. Lift up the clamping levers on both
door hinges fully.
3. Hold the door on both sides with both
hands and close it approximately 3 /
4 of the way going through the point
of resistance.
2
4
3
3
4
5
60º 4
11.5 Lamp
WARNING!
Danger of electrocution! Disconnect the fuse before you replace
the lamp.
The lamp and the lamp glass cover can be hot.
Before you change the lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or
deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the
interior of the appliance. It prevents damage to the lamp glass
cover and the cavity.
Always use the same lamp type.
Inserting the door
1. Hold the door on both sides at an angle of approximately 60° (from the
side of the door with the handle).
2. Push the door hinges at the same
time into the two recesses at the bottom of the appliance on the left and
the right as far as they go.
3. Shut the door only to a point of resistance and then open it as far as it
goes.
4. Lock the clamping levers on the hinges fully.
5. Close the door.
Replacing the lamp on the left side of
the cavity:
1. Remove the left shelf support.
2. Use a Torx 20 screwdriver to remove
the cover.
3. Remove and clean the metal frame
and the seal.
4. Replace the lamp with a suitable 300
°C heat-resistant lamp.
5. Install the metal frame and the seal.
Tighten the screws.
6. Install the left shelf support.
ENGLISH
21
12. WHAT TO DO IF…
WARNING!
Refer to the Safety chapters.
Problem
Possible cause
Remedy
The appliance does
not heat up.
The appliance is deactivated.
Activate the appliance.
The appliance does
not heat up.
The clock is not set.
Set the clock.
The appliance does
not heat up.
The necessary settings are
not set.
Make sure that the settings
are correct.
The appliance does
not heat up.
The Child Lock is activated.
Refer to "Activating and deactivating the Child Lock
function".
The appliance does
not heat up.
The fuse is released.
Make sure that the fuse is
the cause of the malfunction. If the fuse releases
again and again, contact an
authorized electrician.
The lamp does not
operate.
The lamp is defective.
Replace the lamp.
"Demo" comes on in The test mode is activated.
the display and the
appliance does not
heat up.
The fan does not
operate.
If you cannot find a solution to the problem yourself, contact your dealer or the
service centre.
1.
2.
3.
Deactivate the appliance.
Touch and hold
until
the appliance activates
and deactivates.
Touch and hold
and
at the same time until an acoustic signal
sounds and “Demo”
goes out.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance cavity.
We recommend that you write the data here:
Model (Mod.)
.........................................
Product number (PNC)
.........................................
Serial number (Serie:)
.........................................
13. INSTALLATION
WARNING!
Refer to the Safety chapters.
22 www.electrolux.com
min.
3 mm
To lift the appliance, do not use
the door handle.
2.
3.
A
A 567
A
252
N 560
A 592
N min. 550
A
ca.50
20
B
N 380-388
Installation
1. Place the appliance in front of the recess and connect the mains plug.
WARNING!
Do not trap the cable! When plugging in at the top, fasten cable
with the cable routing on the lefthand side.
Fix the appliance on the both sides
with 2 screws (detail A).
A 388
WARNING!
During installation in combustible
matter, NIN SEV 1000 and fire
protection guidelines and regulations of the Association of Cantonal Fire Insurance shall be strictly
adhered to.
– Cable length: 2.50 m from appliance
– Plug: version 12
Push the appliance into the recess.
ENGLISH
23
A = Appliance
N = Recess
A
B
13
N
20
A
13.1 Electrical connection
Let a qualified electrician connect
the appliance to the electricity
supply.
Use a power cable of the type H05VV-F
or higher.
Install the appliance with a socket supply
line. If there is no socket supply line, the
fixed home electrical system must include
an isolating device with at least a 3 mmcontact separation to enable a simultane-
14.
CH
ous and all-pole cut off from the mains
(according to NIN SEV 1000). The customer must have a socket for the electrical connection that is accessible and outside the coordination room. The length of
the connection cable must be approximately 120 cm with lines connected directly to the mains.
1. Do the electrical connections according to connection diagram.
2. Secure the strain relief.
GARANTIE, GARANZIA, GUARANTEE
14.1 Kundendienst, service-clientèle, Servizio clienti, Customer
Service Centres
Servicestellen
Points de Service
Servizio dopo
vendita
5506 Mägenwil/Zürich Industriestrasse 10
3018 Bern Morgenstrasse 131
1028 Préver6928 Manno
enges Le Trési 6 Via Violino 11
9000 St. Gallen Zürcherstrasse 204e
4052 Basel St. JakobTurm Birsstrasse 320B
6020 Emmenbrücke Seetalstrasse 11
Point of
Service
24 www.electrolux.com
Servicestellen
Points de Service
Servizio dopo
vendita
Point of
Service
7000 Chur Comercialstrasse 19
Ersatzteilverkauf/Points de vente de
rechange/Vendita pezzi di ricambio/
spare parts service:
5506 Mägenwil, Industriestrasse 10, Tel.
0848 848 111
Fachberatung/Verkauf/Demonstration/Vente/Consulente (cucina)/Vendita
8048 Zürich, Badenerstrasse 587, Tel.
044 405 81 11
Garantie Für jedes Produkt gewähren wir
ab Verkauf bzw. Lieferdatum an den Endverbraucher eine Garantie von 2 Jahren.
(Ausweis durch Garantieschein, Faktura
oder Verkaufsbeleg). Die Garantieleistung
umfasst die Kosten für Material, Arbeitsund Reisezeit. Die Garantieleistung entfällt
bei Nichtbeachtung der Gebrauchsanweisung und Betriebs-vorschriften, unsachgerechter Installation, sowie bei Beschädigung durch äussere Einflüsse, höhere Gewalt, Eingriffe Dritter und Verwendung von
Nicht-Original Teilen.
Garantie Nous octroyons sur chaque
produit 2 ans de garantie à partir de la
date de livraison ou de la mise en service
au consommateur (documenté au moyen
d’une facture, d’un bon de garantie ou
d’un justificatif d’achat). Notre garantie
couvre les frais de mains d’œuvres et de
déplacement, ainsi que les pièces de rechange. Les conditions de garantie ne
sont pas valables en cas d’intervention
d’un tiers non autorisé, de l’emploi de
pièces de rechange non originales, d’erreurs de maniement ou d’installation dues
à l’inobser-vation du mode d’emploi, et
pour des dommages causés par des influences extérieures ou de force majeure.
Garanzia Per ogni prodotto concediamo
una garanzia di 2 anni a partire dalla data
di consegna o dalla sua messa in funzione. (fa stato la data della fattura, del
certificato di garanzia o dello scontrino
d’acquisto) Nella garanzia sono comprese
le spese di manodopera, di viaggio e del
materiale. Dalla copertura sono esclusi il
logoramento ed i danni causati da agenti
esterni, intervento di terzi, utilizzo di ricambi non originali o dalla inosservanza
delle prescrizioni d’istallazione ed istruzioni per l’uso.
Warranty For each product we provide a
two-year guarantee from the date of purchase or delivery to the consumer (with a
guarantee certificate, invoice or sales receipt serving as proof). The guarantee
covers the costs of materials, labour and
travel. The guarantee will lapse if the operating instructions and conditions of use
are not adhered to, if the product is incorrectly installed, or in the event of damage
caused by external influences, force majeure, intervention by third parties or the
use of non-genuine components.
15. ENVIRONMENT CONCERNS
Recycle the materials with the symbol
. Put the packaging in applicable
and electronic appliances. Do not dispose
appliances marked with the symbol
containers to recycle it.
Help protect the environment and human
health and to recycle waste of electrical
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
ENGLISH
25
26 www.electrolux.com
ENGLISH
27
892967146-A-462013
www.electrolux.com/shop