Yamaha DRX-2 Owner's Manual

PDF

Document

U
DVD Recorder
Enregistreur DVD
DRX-2
OWNER’S MANUAL
MODE D’EMPLOI
General information
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTSINSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This “bolt of lightning” indicates uninsulated material within
your unit may cause an electrical shock. For the safety of
everyone in your household, please do not remove product
covering.
The “exclamation point” calls attention to features for which
you should read the enclosed literature closely to prevent
operating and maintenance problems.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR MOISTURE.
CAUTION:
To prevent electric shock, match wide blade of plug to wide slot,
and fully insert.
ATTENTION:
Pour &eacute;viter les chocs &eacute;lectriques, introduire la lame la plus large
de la fiche dans la borne correspondante de a prise et pousser
jusqu’au fond.
IMPORTANT SAFETY INSTRUCTIONS
1. Read Instructions — All the safety and operating instructions should be
read before the appliance is operated.
2. Retain Instructions — The safety and operating instructions should be
retained for future reference.
3. Heed Warnings — All warnings on the appliance and in the operating
instructions should be adhered to.
4. Follow Instructions — All operating and use instructions should be followed.
5. Cleaning — Unplug this product from the wall outlet before cleaning. Do
not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning.
Exception: A product that is meant for uninterrupted service and that for
some specific reason, such as the possibility of the loss of an authorization
code for a CATV converter, is not intended to be unplugged by the user for
cleaning or any other purpose, may exclude the reference to unplugging the
appliance in the cleaning description otherwise required in item 5.
6. Attachments — Do not use attachments not recommended by the
video product manufacturer as they may cause hazards.
7. Water and Moisture — Do not use this video product near water - for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet
basement, or near a swimming pool, and the like.
8. Accessories — Do not place this video product on an unstable cart,
stand, tripod, bracket, or table. The video product may fall, causing serious
injury to a child or adult, and serious damage to the appliance. Use only
with a cart, stand, tripod, bracket, or table recommended by the
manufacturer or sold with the video product. Any mounting of the
appliance should follow the manufacturer’s instructions and should use a
mounting accessory recommended by the manufacturer.
8A.
An appliance and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.
9.Ventilation — Slots and openings in the cabinet are provided for
ventilation, to ensure reliable operation of the video product, and to
protect it from overheating. These openings must not be blocked or
covered. The openings should never be blocked by placing the video
product on a bed, sofa, rug,
or other similar surface. This video product should never be placed near or
over a radiator or heat register. This video product should not be placed in
a built-in installation such as a bookcase or rack unless proper ventilation is
provided or the manufacturer’s instructions have been adhered to.
10. Power Sources — This video product should be operated only from
the type of power source indicated on the marking label. If you are not
sure of the type of power supply to your home, consult your appliance
supplier or local power company. For video products intended to operate
from battery power, or other sources, refer to the operating instructions.
11. Polarization — This product may be equipped with a polarized
alternating-current line plug (a plug having one blade wider than the
other). This plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug.
If the plug should still fail to fit, contact your electrician to replace your
obsolete outlet. Do not defeat the safety purpose of the polarized plug.
12. Power-Cord Protection — Power supply cords should be routed so that
they are not likely to be walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit from the appliance.
13. Outdoor Antenna Grounding — If an outside antenna or cable system
is connected to the video product, be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges and
built-up static charges.
Section 810 of the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge unit, size
of grounding conductors, location of antenna-discharge unit, connection
to grounding electrodes, and requirements for the grounding electrode.
See Fig.A.
Fig.A.
EXAMPLE OF ANTENNA GROUNDING AS
PER NATIONAL ELECTRICAL CODE (NEC)
GROUND CLAMP
ANTENNA LEAD
IN WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND
CLAMPS
ELECTRIC SERVICE EQUIPMENT
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
14. Lightning — For added protection for this product during a lightning
storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable system.
This will prevent damage to the product due to lightning and power surges.
15. Power lines — An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
16. Overloading — Do not overload wall outlets and extension cords as
this can result in a risk of fire or electric shock.
17. Object and Liquid Entry — Never push objects of any kind into this
product through openings as they may touch dangerous voltage points or
short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
18. Servicing — Do not attempt to service this product yourself, as
opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
19. Damage Requiring Service — Unplug this product from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled on, or objects have fallen into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the operating
instructions as an improper adjustment of other controls may result in
damage and will often require extensive work by a qualified technician to
restore the product to its normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. When the product exhibits a distinct change in performance - this
indicates a need for service.
20. Replacement Parts — When replacement parts are required, be sure the
service technician has used replacement parts specified by the manufacturer
or which have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock or other hazards.
21. Safety Check — Upon completion of any service or repairs to this
product, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.
22. Carts and Stands — The appliance should be used only with a cart or
stand that is recommended by the manufacturer.
23. Heat — The product should be situated away from heat sources such
as radiators, heat registers, stoves, or other products that produce heat.
For Customer Use:
Enter below the Serial No. which is located on the rear of the cabinet.Retain this information for future reference.
Model No. DRX-2
Serial No.__________________________
i
General information
English
Laser safety
This unit employs a laser.To prevent possible eye injury, only a qualified
service person should remove the cover or attempt to service this device.
LASER
Type
CAUTION
Use of controls or adjustments or performance of procedures other
than those specified herein may result in hazardous radiation
exposure.
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID
EXPOSURE TO BEAM.
Wavelength
Output Power
(out of objective)
Beam divergence
ATTENTION
L’emploi de commandes, de r&eacute;glages ou un choix de proc&eacute;dures
diff&eacute;rents des sp&eacute;cifications de cette brochure peut entra&icirc;ner une
exposition &agrave; d’&eacute;ventuelles radiations pouvant &ecirc;tre dangereses.
RAYONNEMENT LASER VISIBLE ET INVISIBLE EN CAS
D’OUVERTURE EXPOSITION DANGEREUSE AU FAISCEAU
InGaAlP semiconductor laser (DVD)
AlGaAs semiconductor laser (CD)
660 nm (DVD)
780 nm (CD)
20 mW (DVD writing)
0.8 mW (DVD reading)
0.3 mW (CD reading)
82 degrees (DVD)
54 degrees (CD)
CAUTION: Visible and invisible laser radiation
CLASS 1
LASER PRODUCT
when open. Avoid exposure to beam.
CAUTION: Visible and invisible laserradiation
when open. Avoid exposure to beam.
COMPLIANCE INFORMATION STATEMENT
(DECLARATION OF CONFORMITY PROCEDURE)
Responsible Party : Yamaha Electronics Corporation
Address : 6660 Orangethorpe Avenue
Buena Park, CA90620
Telephone : 714-522-9105
Fax : 714-670-0108
Type of Equipment : DVD Recorder
Model Name : DRX-2
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1) this device may not cause harmful interference, and
2) this device must accept any interference received including
interference that may cause undesired operation.
See the user manual instructions if interference to radio reception is
suspected.
FCC INFORMATION (for US customers)
1.
IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!
This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly
approved by Yamaha may void your authority, granted by the FCC, to use the product.
2.
IMPORTANT:When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this
product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in
the USA.
3.
NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class “B” digital devices.
Compliance with these requirements provides a reasonable level of assurance that your use of this product in a residential environment will not
result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used
according to the instructions found in the users manual, may cause interference harmful to the operation of other electronic devices. Compliance
with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of
interference, which can be determined by turning the product “OFF” and “ON”, please try to eliminate the problem by using one of the following
measures:
Relocate either this product or the device that is being affected by the interference.
Utilize power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter/s.
In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300 ohm ribbon lead, change the lead-in to coaxial
type cable.
If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If
you can not locate the appropriate retailer, please contact Yamaha Electronics Corp., 6600 Orangethorpe Ave. Buena Park, CA90620.
The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries.
THIS DIGITAL APPARATUS DOES NOT EXCEED THE CLASS B
LIMITS FOR RADIO NOISE EMISSIONS FROM DIGITAL APPARATUS
AS SET OUT IN THE RADIO INTERFERENCE REGULATIONS OF
THE CANADIAN DEPARTMENT OF COMMUNICATIONS.
CET APPAREIL NUM&Eacute;RIQUE N’&Eacute;MET PAS DE BRUITS
RADIO&Eacute;LECTRIQUES D&Eacute;PASSANT LES LIMITES APPLICABLES
DANS LA R&Egrave;GLEMENT SUR LE BROUILLAGE RADIO&Eacute;LECTRIQUES
&Eacute;DICT&Eacute; PAR LE MINIST&Egrave;RE DES COMMUNICATIONS DU
CANADA.
General information
NOTE TO CABLE TV SYSTEM INSTALLER:
This reminder is provided to call the Cable TV (CATV) system
installer’s attention to Article 820-40 of the NEC (National Electrical
Code) that provides guidelines for proper grounding and, in particular,
specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
ii
Simple programming system for DVD
recorders. Simply enter the number
code associated with your television program. This number is located in your
television listings magazine.
Manufactured under license from Dolby Laboratories.“Dolby
”,“Pro Logic ”and the double-D symbol are trademarks of
Dolby Laboratories.Confidential Unpublished Works.
&copy;1992-1997 Dolby Laboratories,Inc.All rights reserved.
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
This product incorporates copyright protection technology
that is protected by method claims of certain U.S.patents and
other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.Reverse engineering or disassembly is prohibited.
Caution
Read this before operating your unit.
1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 The recommended operating temperature range for the
Recorder is from 15˚C-35˚C (Celsius). Exceeding these
ranges may cause unstable recording results. Do not expose
this unit to sudden temperature changes from cold to hot,
nor locate this unit in an environment with high humidity
(i.e., a room with a humidifier) to prevent condensation
inside this unit, which may cause an electrical shock, fire,
damage to this unit, and/or personal injury.
3 Locate this unit away from other electrical appliances,
motors, or transformers to avoid humming sounds.
4 Install this unit in a well ventilated, cool, dry, clean place —
away from direct sunlight, heat sources, vibration, dust, moisture, or cold. In a cabinet, allow about 2.5cm (1 inch) of free
space all around this unit for adequate ventilation.
5 Avoid installing this unit in a location where foreign objects
may fall onto this unit or where this unit may be exposed to
liquid dripping or splashing. On the top of this unit, do not
place:
– Other components, as they may cause damage and/or
discoloration on the surface of this unit.
– Burning objects (i.e., candles), as they may cause fire, damage
to this unit, and/or personal injury.
– Containers with liquid in them, as they may fall, spilling the
liquid and causing an electrical shock to the user and/or
damage to this unit.
6 Do not cover this unit with a newspaper, tablecloth, curtain,
etc. in order not to obstruct heat radiation. If the temperature inside this unit rises, it may cause fire, damage to this
unit, and/or personal injury.
7 Do not plug in this unit to a wall outlet until all connections
are complete.
8 Do not operate this unit upside-down. It may overheat, possibly causing damage.
9 Do not use excessive force on switches, knobs and/or cords.
10 When disconnecting the power cord from the wall outlet,
grasp the plug; do not pull the cord.
11 Do not clean this unit with chemical solvents; this might damage the finish. Use a clean, dry cloth.
iii
12 Use only the voltage specified on this unit. Using this unit
with a higher voltage than specified is dangerous and may
cause fire, damage to this unit, and/or personal injury.
YAMAHA will not be held responsible for any damage resulting from use of this unit with a voltage other than as specified.
13 To prevent damage by lightning, disconnect the power cord
from the wall outlet during an electrical storm.
14 Do not attempt to modify or fix this unit. Contact qualified
YAMAHA service personnel when any service is needed. The
cabinet should never be opened for any reason.
15 When not planning to use this unit for long periods of time
(i.e., vacation), disconnect the AC power plug from the wall
outlet.
16 Be sure to read the “Before you call an engineer” section on
common operating errors before concluding that this unit is
faulty.
17 Before moving this unit, press STANBY/ON to set the unit in
standby mode, then disconnect the AC power plug from the
wall outlet.
The unit is not disconnected from the AC power source as
long as it is connected to the wall outlet,even if this unit itself is
turned off.This state is called the standby mode.In this
state,this unit is designed to consume a very small quantity of
power.
FOR CANADIAN CUSTOMERS
To prevent electric shock, match wide blade of plug to wide
slot and fully insert.
This Class B digital apparatus complies with Canadian ICES-003.
This digital apparatus does not exceed the Class B limits for
radio noise emissions from digital apparatus as set out in the
Radio Interference Regulations of the Canadian Department of
Communications.
General information
English
Features
Digital Home Cinema
Introducing YAMAHA DVD recorder in your home theater environment!
Dolby Digital and DTS are supported.You can enjoy super dynamic theatrical sound by
connecting to AV receiver/amplifier.
Dolby Digital
Dolby Laboratories standard for transmitting 5.1 channels. Five full-value channels are
transmitted in this acoustic playback system. A further channel is used for low frequencies (effects). The loudspeakers are arranged front left, front middle, front right, rear left
and rear right. This system is currently the most common system and is used in cinemas.
With this DVD recorder each sound track in 2-channel Dolby Digital is recorded onto
a DVD+RW.
DTS digital out
Linear PCM Audio
Recording
Six Recording Modes
Six Hours of
Recording Time
Fit to Space Recording
Transmission standard for 5.1 channels from Digital Theatre Systems Inc. This is the
second most wide-spread system after Dolby Digital.
M1 &amp; M2 recording modes offer high quality picture and sound enabled by linear PCM
recording.
You have six recording modes to choose from: M1, M2, M2x, M3, M4, M6.
Select the one best suited for your need.
You can record up to six hours in M6 recording mode.
Your DVD recorder calculates the best suitable bit rates from your programmed
recording time and an available disc space.
Simple programming system for DVD recorders. Simply enter the programming number associated with your television programme.You will find this number in your favorite listings magazine.
Safe Record
Normally a recording is made at the current disc position. This is the same as for a
video cassette, in the middle of the tape for example. By holding down the REC S
button, the recording will be made at the end of all the other recordings to avoid overwriting previous recordings.
New recordings on DVD+R discs are always added after all existing recordings.
Index Picture Screen
This screen tells you what’s on the disc. Each index screen represents a recording. On
the right hand side of the screen you can also see a disc indicator that shows the position and length of the current recording on the disc in a graphic format.You can
choose and make your own index pictures from the title in playback.
EDIT
DVD makes it so easy to delete titles, split titles, insert chapters automatically and
manual, and do many more things. It enables you to simply delete commercials and
unwanted scenes.
Many Playable Disc Types
The following types of disc are supported: DVD-Video, DVD-R, DVD-RW, CD, SVCD,
VCD, CD-R, and CD-RW.
Your DVD recorder can play back pre-recorded DVDs and CDs. DVDs recorded using
this DVD recorder can be played back on current and future DVD players.
MP3-CD PLAYBACK
ID3 Tag
MP3 files are highly compressed music files. The data is compressed to 1/10 of the volume of the original audio material using a special process. This means that 10 hours of
music can be stored on a single CD.
These music CDs can be played on this machine.
When playing MP3, your DVD recorder will display on TV the name of the albums,
tracks, and artists if ID3 Tag information is recorded on the disc.
This connector is also known as a “FireWire” or “IEEE 1394”. This connector is used
to transmit wide digital broadband signals that are used for digital video camcorders.
Using this connector, you can so easily capture and save video onto DVD from your
digital video camera.
General information
iv
Table of contents
A quick preview ............................3
The remote control.................................................................................3
Additional TV functions ..........................................................................4
Front of the device ..................................................................................5
Back of the unit.........................................................................................6
The symbols on your DVD recorder display ....................................7
Messages in the DVD recorder display...............................................7
1. Introduction .............................9
Common questions .................................................................................9
Discs you can use.................................................................................. 10
Regional code ......................................................................................... 11
Accessories............................................................................................. 11
Cleaning the discs.................................................................................. 11
2. Connecting your DVD
recorder.......................................12
Preparing the remote control ............................................................ 12
Connection notes.................................................................................. 12
Connecting your antenna .................................................................... 12
Connecting your TV to get the best picture .................................. 13
Connecting a VCR ................................................................................ 15
Connecting your camcorder .............................................................. 15
3. Connecting an AV receiver ..16
Basic playback connections ................................................................. 16
Surround sound connections ............................................................. 17
Recording connections ........................................................................ 18
Power supply.......................................................................................... 19
Switching on ........................................................................................... 19
4. Installing your DVD
recorder.......................................20
Initial installation .................................................................................... 20
Automatic TV channel search ............................................................ 22
Adding and clearing TV channels manually...................................... 23
Setting the language .............................................................................. 24
Assigning the VCR Plus+&reg; Guide channel numbers..................... 25
Setting the time and date automatically ........................................... 26
Manually setting the time &amp; date ....................................................... 27
1
5. On-screen information......... 28
Symbols in the menu bar ..................................................................... 28
Field for temporary messages ............................................................ 28
Status field............................................................................................... 29
Tuner information box ........................................................................ 30
Timer information box ........................................................................ 30
6. Playback................................. 31
General notes on playback.................................................................. 31
Inserting a disc ....................................................................................... 31
Playing a DVD video disc..................................................................... 32
Playing a DVD+RW/ +R disc.............................................................. 32
Playing an audio CD.............................................................................. 33
Playing an MP3 CD................................................................................ 33
Playing a (Super) Video CD ................................................................ 34
7. Additional playback
features ....................................... 35
Changing to another title/chapter ..................................................... 35
Searching a disc...................................................................................... 35
Still picture.............................................................................................. 36
Slow motion ........................................................................................... 36
Search by time........................................................................................ 36
Repeat play.............................................................................................. 37
Shuffle....................................................................................................... 37
Scan feature ............................................................................................ 37
Camera angle.......................................................................................... 38
Zoom feature ......................................................................................... 38
Select the audio language .................................................................... 39
Subtitles ................................................................................................... 39
8. Manual recording.................. 40
General .................................................................................................... 40
Recording without automatic switch-off ......................................... 41
Interrupt recording (Pause) ................................................................ 42
Recording with automatic switch-off
(OTR one-touch-recording) ............................................................... 43
Preventing accidental erasing of discs............................................... 44
Lining up recordings within a title (assemble cut) ......................... 45
Selecting the recording type (Quality) ............................................. 46
Table of contents
English
9. Managing the disc
contents .......................................47
General.....................................................................................................47
EDIT ..........................................................................................................47
Editing recording titles (name)............................................................50
Playing the entire title ...........................................................................50
Deleting recordings/titles.....................................................................50
Disc settings ............................................................................................51
10. Programming a recording
(TIMER) .......................................53
General.....................................................................................................53
Programming recordings with the VCR Plus+&reg; System ..............54
Programming recordings without the VCR Plus+&reg; System ........55
How to change or delete a programmed recording (TIMER).....56
Problem solving for programmed recordings .................................57
11. User preferences ................58
Picture settings .......................................................................................58
Sound settings.........................................................................................59
Language settings....................................................................................60
Additional settings .................................................................................60
Disc feature menu..................................................................................61
12. Access control
(Child Lock).................................62
Child lock (DVD and VCD) ................................................................62
Parental level control (DVD video only)..........................................63
Changing the PIN code.........................................................................64
13. Before you call an
engineer.......................................65
Appendix .....................................68
Using DRX-2 remote control for your TV set...............................68
Specifications...........................................................................................70
Table of contents
2
A quick preview
The remote control
3
B/I
Switch on or off: Press to switch set on or off, interrupt
menu function, interrupt a programmed recording (TIMER)
MONITOR
This button lets you switch between the TV receiver (internal
tuner) in the DVD recorder (TV picture on the TV set) and
playback on the DVD recorder
A/CH (Alternate
Channel)
Switches to the previous TV channel
CH +/–
Turns programs and inputs
0-9
Numerical key pad
VOL +/–
TV volume up/down
SELECT
Switches between different values in a menu
CLEAR
Deletes last entry/clear timer and programmed recordings
MUTE
TV Mute ON/OFF
TIMER
Press to make a TIMER programming with VCR Plus+&reg; /without VCR Plus+&reg; or to alter or clear a programmed TIMER
wvt u
Down/up/left/right cursor movement
ENTER/OK
Confirms menu selection
TOP MENU
Displays DVD disc menu or Index Picture Screen
EDIT
Displays Edit menu for DVD+RW or DVD+R disc
SYSTEM MENU
Displays recorder system menu bar
TITLE/CHAP
Selects title
Selects chapter
SUBTITLE
Subtitle language selector
AUDIO
Audio language selector
ANGLE
Selects DVD camera angle
ZOOM
Enlarges video image
REPEAT
Repeats chapter, track, title, disc
A-B
Repeats a specific segment
SHUFFLE
Plays tracks in random order
SCAN
Playback of the first 10 seconds of each chapter within a title
(DVD) or the first 10 seconds of each track on a disc (VCD/
CD)
t SKIP
Selects previous title/search backwards :
Briefly press the button during playback: Goes to previous
chapter/film or previous title
Hold down the button: Searches backwards
Hold down the button during still picture: Slow motion backwards
A quick preview
English
y SKIP
PLAY
Selects next title/search forwards :
Briefly press the button during playback: Goes to next chapter/
film or next title
Hold down the button: Searches forwards
Hold down the button during still picture: Slow motion forwards
Starts playback
e SEARCH/
SLOW
Searches backward
Slow motion
r SEARCH/
SLOW
Searches forward
Slow motion
PAUSE
If this button is pressed during playback, the DVD recorder
switches to pause.You will see a still picture.
If this button is pressed during recording, the DVD recorder
will also switch to pause.
STOP
Stops playback/recording, except with programmed recordings
(TIMER)
Hold down button, opens and closes the disc tray
DIMMER
Changes brightness settings of the display
TV SHIFT
Press and hold while using other buttons to work the TV
S REC
Direct recording of the currently selected programme
REC MODE
Switches recording modes
Additional TV functions
This remote control can also operate TV set made by different manufacturers.
For more information, see “Using DRX-2 remote control for your TV set”.
A quick preview
VOL+
Increase TV volume
VOL –
Reduce TV volume
For the following functions you need to hold down the button
at the side TV/SHIFT and then select the function you need
with the appropriate button.
B/I
Turns the TV on / off
0..9
Number buttons: 0 - 9
CH+
Turns up the programme in numeric order
To select a higher programme number
CH-
Turns down the programme in numeric order
To select a lower programme number
MUTE
TV Mute on / off
4
Front of the device
STANDBY/ON
Switches the unit on or off, interrupt a function, interrupt a
programmed recording (TIMER)
F (Open/Close)
Open/close disc tray
REC
Records the current TV channel
W
Plays a recorded disc
T
Selects previous title/search backwards
Y
Selects next title/search forwards
A
Interrupt playback/recording
Auxiliary jacks on the front panel
S-VIDEO
S Video jack: Connection of SVHS/Hi8 camcorders or SVHS/
Hi8 video recorders (programme number “CAM1”)
Yellow jack VIDEO Video input jack: Connection of camcorders or video
recorders (programme number “CAM1”)
White/red jack left Audio input jack left/right : Connection of camcorders or
AUDIO right
video recorders (programme number “CAM1”)
DV IN
i Link/DV jack (digital video input, IEEE 1394,
FireWire):
Connecting a digital camcorder or other suitable device (programme number “CAM2”).
Tip
Switching between the S-VIDEO and VIDEO jacks takes place automatically. If
both jacks are in use, the signal at the S-VIDEO jack has priority.
5
A quick preview
English
Back of the unit
MAINS
Mains jack: Connection to the mains supply (120V/60Hz)
ANTENNA
Aerial input : Connection of the aerial
TV
Aerial output : Connection of the TV set
Input (IN-EXT2)
S-VIDEO IN
S-Video input: Connection for an additional device (channel
number “EXT2”). Switching between jack S-VIDEO IN and
Video in is done automatically.
Video in
Video input (yellow): Connection for an additional device
(channel number “EXT2”)
IN L AUDIO R
Analog audio input (red/white) underneath jack Video in.
Audio for jack Video in : Connection for an additional device
(channel number “EXT2”)
Input (IN-EXT1)
IN AUDIO LR
Analog audio input (red/white) next to jack IN COMPONENT VIDEO: Connection for an additional device. Audio
input for component video (channel number “EXT1”)
IN COMPONENT Component video input (red/blue/green): Connection
for an additional device with component video output (channel
VIDEO
number “EXT1”)
Output (OUT-2)
S-VIDEO OUT
S-Video output: Connection for a S-video-compatible TV
OUT VIDEO
(CVBS)
Video output (yellow): Connection to a TV with video input
(CVBS, Composite Video)
OUT L AUDIO R
Analog audio output (red/white) underneath jack Video
in.
Audio for jack OUT VIDEO (CVBS) : Connection for an additional device
Output (OUT-1 480p/480i)
A quick preview
OUT AUDIO LR
Analog audio output (red/white): Connection for an additional device. Audio output for component video/progressive
scan
OUT
COMPONENT
VIDEO
Component video output (red/blue/green): Connection
for an additional device with component video/progressive
scan output
6
Output (DIGITAL AUDIO OUT)
COAXIAL
OUTPUT
Connection of a digital audio device (amplifier/receiver) using a
coaxial digital cable
OPTICAL
OUTPUT
Connection of a digital audio device (amplifier/receiver) using a
fiber optic cable
The symbols on your DVD recorder
display
The following symbols may appear on your DVD Recorder display:
TIMER TV PRO
SAP
Multifunction display/text line
•) Clock
•) Disc/Title play time
•) OTR time
•) Title name
•) Display of the TV channel number / playing time / function
•) Display of information, warnings
IIIIIIIIIIIIIII
Disc bar: Displays the current position on the disc (disc
pointer).
Record: single flashing segment at the current position.
Pause: flashing segment on both sides of the current position.
Stop: flashing segment at the current position.
TIMER
A recording (Timer) has been programmed
TV
Modulator is switched off (NAFTA). The antenna signal (RF signal) is only connected to the TV when the modulator is
switched off.
PRO
Component Video output set to “Progressive Scan”. If this is
not displayed, the Component Video output is set to “Interlaced”.
Remote control command has been sent
SAP
Second audio program from the tuner is selected (NAFTA)
Messages in the DVD recorder display
The following messages may appear in your DVD recorder display:
7
IS TV ON?
The DVD recorder is in initial installation mode. Switch the TV
on, then read the paragraph on “Initial installation” in “Installing
your DVD recorder”.
NO SIGNAL
No input signal available (signal inadequate or unstable)
MENU
The menu on the screen is active
OPENING
Disc tray opening
TRAY OPEN
Disc tray open
CLOSING
Disc tray closing
A quick preview
English
A quick preview
READING
Disc being read
MENU UPDT
Once recording has been successfully completed the table of
contents is created
INIT MENU
The menu structure is created after the first recording has
been made on a new disc
COPY PROT
You have tried to copy a copy-protected DVD/video cassette
WAIT
Please wait until this message disappears. The DVD recorder is
busy performing a task
NO DISC
A disc has not been inserted for recording. If a disc has been
inserted, it cannot be read
INFO
Information about the inserted DVD is displayed on the screen
BUSY
The DVD recorder is processing to make the disc DVD compatible
ERASING
The entire information of the disc is erased
EMPTYDISC
The disc inserted is either new or has been completely erased
(not recorded)
PROTECTED
The disc is protected against recording
MAX TITLE
The maximum number of titles per disc has been reached. The
maximum number of titles per disc is 48
MAX CHAP
The maximum number of chapters per title/disc has been
reached. The maximum number of chapters per title is 124
DISC FULL
The disc is full. There is no space for new recordings
PAL DISC
A disc with PAL recordings has been inserted. The machine is
trying to record an NTSC signal. Insert a new disc or one that
contains NTSC recordings
NTSC DISC
A disc with NTSC recordings has been inserted. The machine
is trying to record a PAL signal. Insert a new disc or one that
contains PAL recordings
RECORDING
An illegal action (e.g. F Open/Close button) was attempted
during recording
FREETITLE
Playback was started for an empty title or the following title is
empty
DISC LOCK
An attempt has been made to record during playback of a protected disc. This message appears if an attempt is made to
insert a chapter marker (EDIT button)
DISC ERR
An error occurred when writing the title. If this error keeps
occurring, please clean the disc or use a new one
For instructions on how to clean a disc, read the section on
“Cleaning the discs” in the next chapter
DISC WARN
An error occurred when writing the title. Recording was continued; the error was skipped
SETUP
After the automatic search the menu for setting the date/time
will appear on the screen
WAIT 01
During the automatic search the TV channels found are
counted
BLOCKED
The disc tray cannot be closed/opened
SAFE REC
The new recording will be added at the end of all the other
recordings (SAFE RECORD)
8
1. Introduction
Common questions
What is a DVD?
DVD (Digital Versatile Disc) is a new storage medium that combines the convenience of
the compact disc with the latest digital video technology. DVD video uses modern
MPEG2 data compression technology that enables an entire feature film to be stored
on a single five inch disc.
How good is the resolution of DVD compared with VHS?
The razor-sharp digital images have a resolution of more than 500 lines of 720 pixels
per line.This is more than twice as high as VHS and is even better than the laser disc. Its
picture quality is easily comparable to the digital masters produced in recording studios.
What can DVD+RW do?
DVD+ReWritable uses phase change media, the same technology on which rewritable
CDs are based. A high-performance laser is used to change the reflective properties of
the recording layer; this process can be repeated more than a thousand times.
What can the DVD+R do?
DVD+R (write-once DVD). Unlike a DVD+RW disc, this disc can only be written once.
If it is not finalized after a recording, further recordings can be added to it. Old recordings can be deleted but can no longer be overwritten. The deleted titles are marked
“Deleted title”.
Before this disc can be played in a DVD player, it must be finalised in the DVD recorder.
Once this process is complete, no further recordings can be added.
What can my DVD recorder do?
Your DVD recorder is a machine for recording and playing back digital video discs with
“two-way” compatibility with the universal DVD video standard. This means:
•) existing DVD video discs can be played on the recorder.
•) Recordings made on your DVD recorder can be played on other DVD video players
and DVD ROM drives.
9
Introduction
English
Discs you can use
The following discs can be used in your DVD recorder for playback and recording:
Playback and recording
DVD+RW (Digital Versatile Disc + rewritable)
DVD+R (Digital Versatile Disc + Recordable)
Playback only:
DVD Video (Digital Versatile Disc)
DVD-R (DVD-Recordable)
DVD-RW (DVD-Rewritable) These discs can only be played back if the recording was
made in video mode and the recording was finalised.
Audio CD (Compact Disc Digital Audio)
Super Audio CD (Only plays the CD layer of a hybrid SACD disc)
Video CD (Format 1.0, 1.1, 2.0)
DIGITAL VIDEO
Super Video CD
SUPER VIDEO
CD-R (CD-Recordable) Audio/MP3 content
Recordable
CD-RW (CD-Rewritable) Audio/MP3 content
ReWritable
Introduction
10
Regional code
Because DVD films are usually not released at the same time in all regions of the world,
all DVD players are keyed to a specific region code. Discs can be assigned an optional
region code. If the region codes of the player and disc do not coincide, playback is not
possible.
ALL
1
This device will only play Region 1 DVDs or DVDs manufactured to be played in all
regions (“ALL”).
DVDs from other regions cannot be played in this DVD Recorder.
The number within the globe represents the region of the world.
Region 1 represents:
U.S, Canada, upper regions of North America, Bermuda, U.S.Virgin Islands and smaller
regions near Australia.
Accessories
Remote control and batteries
Power cable
Component video cable
Video cable
Antenna cable
Audio cable
DVD + RW disc
Cleaning the discs
Some malfunctions (frozen or distorted picture and broken sound for example) are due
to dirt on the disc. To avoid such problems you should clean your discs regularly.
1
Dirty discs should be cleaned with a soft cloth. Always wipe from the middle to
the edge.
2
Do not use any solvents such as benzine, thinners, commercially available cleaning
agents or antistatic sprays designed for vinyl records.
Question
Can I use a CD lens cleaner in the DVD recorder?
This optical unit (laser) of the DVD recorder operates at a higher power level than
the ones in normal DVDs and CD players so CD lens cleaner discs may actually
damage it.
CD lens cleaner discs should therefore not be used.
11
Introduction
English
2. Connecting your DVD recorder
Preparing the remote control
You must install the supplied batteries into the remote control before you can use it.
1
Unpack the remote control and the two AA (LR-6) batteries.
2
Open the battery compartment, insert the batteries in accordance with the polarity markings, and then close the battery compartment.
The remote control is now ready to use.
The remote control has a range of approximately 5 to 10 meters.
Caution
Do not mix old and new batteries. Never mix different types of batteries
(standard, alkaline, etc.). Doing so may reduce the life of the batteries.
Connection notes
•) Before connecting your TV,VCR, AV amp, or any other equipment to your DVD
recorder, refer to the relevant manuals first.
•) Do not connect the power cord until all connections are complete.
•) For the best results when playing DVDs, connect the DVD recorder’s video output
directly to your TV. If you connect your TV via your VCR, the DVD copy protection
system may affect the picture quality.
•) To enjoy the surround sound capabilities offered by DVD (Dolby Digital, DTS,
MPEG-2), you need to connect one of the DVD recorder’s digital audio outputs to
an AV amp with an appropriate surround-sound decoder built-in. See “Surround
sound connections” on page 17.
•) For synchronized recordings to other components connected with digital audio
cables, the length of each track and track numbers of the recorded materials may
become different from the originals. Occasionally, it does not start recording.
Caution
Do not connect the DVD recorder’s audio outputs to your audio system’s
turntable (phono) inputs. Doing so may damage your equipment.
Connecting your antenna
Connecting your antenna as shown will allow you to record a program on your DVD
recorder while watching another program on your TV.
TV
1
2
Antenna In
Connecting your DVD recorder
1
Disconnect the antenna plug (1) from your TV and connect it to the DVD
recorder’s ANTENNA socket.
2
Using the supplied antenna cable (2), connect the DVD recorder’s TV socket to
your TV’s antenna input.
12
Connecting your TV to get the best
picture
To enjoy the best picture quality when playing DVDs, you need to connect the DVD
recorder to your TV using one of the following connection (the connection you choose
will most likely depend on the connections supported by your TV).
COMPONENT VIDEO (best picture quality)
Component video connections offer the best picture quality, so if your TV has a
COMPONENT VIDEO input, use it.
S-Video (very good picture quality)
S-Video connections offer better picture quality than composite video, so if your
TV has an S-Video input, use it.
Composite video (good picture quality)
If your TV has neither COMPONENT VIDEO nor S-Video inputs, use a composite
video connection.
Using a Component video cable
2
TV
1
3
4
13
1
Connect the supplied Component video cable (3) to the DVD recorder’s COMPONENT VIDEO outputs socket.
2
Connect the other end of the Component video cable to a COMPONENT
VIDEO input on your TV.
3
Using the supplied AUDIO L/R cable (4), connect the DVD recorder’s AUDIO L/
R outputs to the analog audio inputs on your TV. (Connect white-to-white and
red-to-red).
Connecting your DVD recorder
English
Using an S-Video cable
Since S-Video cables carry only video signals, separate audio connections are necessary.
TV
2
Antenna In
1
S-video In
5
Analog
audio In
4
1
Using an S-Video cable (5), connect the DVD recorder’s S-VIDEO output to an
S-Video input on your TV.
2
Using the supplied AUDIO L/R cable (4), connect the DVD recorder’s AUDIO L/
R outputs to the analog audio inputs on your TV. (Connect white-to-white and
red-to-red).
Using a composite video cable
TV
2
Antenna In
1
6
Composite
video In
Analog
audio In
4
Connecting your DVD recorder
1
Using the supplied composite video cable (6), connect the DVD recorder’s
VIDEO (CVBS) output to a composite video input on your TV.
2
Using an AUDIO L/R cable (4), connect the DVD recorder’s AUDIO L/R outputs
to the analog audio inputs on your TV. Connect white-to-white and red-to-red).
14
Connecting a VCR
You can connect a VCR to the DVD recorder’s IN-EXT 2 and OUT 2 sockets.
If you have an S-VHS VCR, you could connect the DVD recorder’s S-VIDEO output
to an S-Video input on the VCR, and connect the DVD recorder’s AUDIO L/R outputs
to analog audio inputs on the VCR.
Notes
Most prerecorded video cassettes and DVDs are copy protected. If you
try to copy them, the message “COPY PROT” will appear on the DVD
recorder’s display.
If the DVD recorder displays the message “NO SIGNAL” when copying a
video cassette:
• Check that the cables are connected securely.
• Try adjusting the VCR’s tracking function.
• The DVD recorder may not recognize the video signal if it’s weak or does not
conform to normal video standards.
When copying DVD-Video discs or prerecorded video cassettes, the picture is fuzzy and the brightness changes continuously?
• This happens when you copy a DVD or video cassette that uses copy protection.
Playback of the original is OK, but the DVD+R(W) recording will be unwatchable. This is normal with copy-protected DVDs and video cassettes.
Connecting your camcorder
You can transfer your home movies to DVD by connecting your camcorder to the AV
sockets on the DVD recorder’s front panel, as shown.
Best picture quality
If you have a DV or Digital 8 camcorder, using its i-link cable (7), connect the camcorder’s i-link DV output to the DVD recorder’s DV input.
During the transfer, the original recording dates and times of your home movies will be
recorded on the DVD as subtitles. During DVD playback, you can view this information
by using the Subtitle function.
5
6
4
7
Very good picture quality
If you have a Hi-8 or S-VHS-C camcorder, using an S-Video cable (5), connect the camcorder’s S-Video output to the DVD recorder’s S VIDEO input. And, using an AUDIO
L/R cable (4), connect the camcorder’s analog audio outputs to the DVD recorder’s
AUDIO L/R inputs.
Good picture quality
Video camera
15
If your camcorder only has a composite video output, using a composite video cable,
connect the camcorder’s composite video output to the DVD recorder’s VIDEO input.
And, using an AUDIO L/R cable (4), connect the camcorder’s analog audio outputs to
the DVD recorder’s AUDIO L/R inputs.
Connecting your DVD recorder
English
3. Connecting an AV receiver
Basic playback connections
The following connections allow you to enjoy DVD playback via your AV receiver.
Composite
video In
TV
AV Receiver
11
S video In
Antenna In
10
Component
video In
4
2
3
1
8
9
7
1
Connect an S-Video cable (7) from the DVD recorder’s S-VIDEO output to an
S-Video input on your AV receiver.
2
Connect a composite video cable (8) from the DVD recorder’s VIDEO (CVBS)
output to a composite video input on your AV receiver.
3
Connect an AUDIO L/R cable (9) from the DVD recorder’s AUDIO L/R outputs
to a pair of analog audio inputs on your AV receiver.
4
If your AV receiver has an S-Video output and your TV has an S-Video input, connect an S-Video cable (10) from the AV receiver’s output to an S-Video input on
your TV.
5
If your AV receiver has no S-Video output or your TV has no S-Video input, connect a composite video cable (11) from the AV receiver’s composite video output
to a composite video input on your TV.
Note
If your AV amp has several video inputs and outputs, you can connect your VCR,
set-top box, LD player, etc., to its video inputs and connect your TV to its video
output. Then you can select your various video sources by using the input selector
on your AV amp.
Connecting an AV receiver
16
Surround sound connections
To enjoy surround sound (Dolby Digital, DTS, MPEG-2), you need to connect one of
the DVD recorder’s digital audio outputs to a multichannel AV amp with an appropriate
surround-sound decoder built-in.
Composite
video In
TV
AV Receiver
11
S video In
10
Component
video In
4
3
12
2
1
13
8
7
Your DVD recorder has both coaxial and optical digital audio outputs. The format you
choose will most likely depend on the formats supported by your AV amp.You don’t
need to connect both cables, and their sound quality is identical.
1
Connect a coaxial (12) or optical (13) digital audio cable from the DVD
recorder’s COAX OUT or OPTICAL OUT to a coaxial or optical digital
audio input on the AV receiver.
You can use a composite video cable instead of a dedicated coaxial digital audio cable.
Note
An unpleasant digital noise may be heard if you select a DVD soundtrack that uses
an audio format that is not supported by your AV amp. For example, you select a
DTS soundtrack and your AV amp does not support DTS. The format of the currently selected soundtrack can be displayed onscreen in the menu bar. Six-channel
(5.1) surround-sound playback is only possible with a multichannel AV amp that supports Dolby Digital, DTS, or MPEG-2.
17
Connecting an AV receiver
English
Recording connections
The following connections allow you to record programs from your VCR or set-top
box to your DVD recorder via your AV receiver.
Composite
video In
11
S video In
Antenna In
10
Component
video In
AV Receiver
VCR
Set top box
4
2
3
1
13
14
12
1
If your VCR or set-top box is connected to your AV receiver with an S-Video
cable, connect an S-Video cable (10) from your AV receiver’s S-Video output to
the S-Video input on your TV.
2
If your VCR or set-top box is connected to your AV receiver with a composite
video cable, connect a composite video cable (11) from the AV receiver’s composite video output to the composite video input on your TV.
You don’t need to connect both the S-Video and composite video cables to your TV.
S-Video offers better picture quality.
Connecting an AV receiver
1
Using the supplied composite video cable (13), connect the DVD recorder’s
VIDEO (CVBS) input to a composite video output on your AV receiver.
2
Using an AUDIO L/R cable (14), connect the DVD recorder’s AUDIO L/R inputs
to the analog audio outputs on your AV receiver. (Connect white-to-white and
red-to-red).
3
Using an S-Video cable (12), connect the DVD recorder’s S-VIDEO input to an
S-Video output on your AV receiver.
18
Power supply
•) Make sure that all necessary connections are made before connecting the DVD
recorder to the power supply.
•) Plug the power cable supplied into the Power connector on the rear of the
recorder.
•) Plug the mains plug into an AC outlet.
Note
Always check if the local mains voltage matches the required 100V - 120V.
When the recorder is in the Standby position, it is still consuming some power.
If you wish to disconnect your DVD recorder completely from the mains, withdraw the plug
from the AC Outlet.
Switching on
•) Switch on the TV set and select the programme number that you have chosen for
video playback (see operating manual for your TV set).
•) Press STANDBY/ON.
– The recorder display lights up. If you have not yet installed your DVD recorder, it
will enter ‘Initial Setup mode.’ In this mode you will have to set your personal
preferences.
19
Connecting an AV receiver
English
4. Installing your DVD recorder
Initial installation
After successfully connecting your DVD recorder to the TV set and other additional
devices as described in the previous chapters, this chapter will show you how to start
the initial installation.
The DVD recorder automatically seeks out and stores all available TV channels.
Tip
Connecting additional devices
If you have connected additional devices such as a satellite receiver to the aerial
cable, switch them on. The automatic channel search will recognise it and save it.
No aerial connected
Even if you only want to use the DVD recorder to play back or have only connected
a satellite receiver, you must still complete the initial installation.
This is necessary so that the basic settings are stored correctly. Once initial installation is complete you can use the DVD recorder as normal.
1
Select the desired language for the on-screen menu by pressing w or v.
Initial Setup
Question
Menu Language
English
Espa&ntilde;ol
Fran&ccedil;ais
What is an on-screen menu?
The multi-language on-screen menu takes the mystery out of using your new DVD
recorder. All settings and/or functions are displayed on your TV screen in the relevant language.
Press OK to continue
2
Confirm with ENTER/OK.
3
Select the desired audio language using w or v.
Initial Setup
Audio Language
English
Espa&ntilde;ol
Fran&ccedil;ais
Portugu&ecirc;s
Italiano
Press OK to continue
Question
What is an audio language?
The DVD audio will play in the selected language if it is available. If this language is
not available on the DVD, the audio will play in the first language on the DVD. The
DVD disc menu will appear in the selected language if it is available on the disc.
4
Confirm with ENTER/OK.
5
Select the desired language for the subtitles by pressing w or v.
Question
Initial Setup
Subtitle Language
English
Espa&ntilde;ol
Fran&ccedil;ais
Portugu&ecirc;s
Italiano
Press OK to continue
Installing your DVD recorder
What is the subtitle language?
DVD subtitles will be in the selected language if it is available. If this language is not
available, subtitles will be in the first language on the DVD.
6
Confirm with ENTER/OK.
20
7
Initial Setup
TV Shape
4:3 letterbox
4:3 panscan
16:9
Select the desired screen format position using w or v.
These settings will only be used if you insert a DVD that contains this information.
Question
Which screen formats can I select?
“4:3 letterbox” for a “wide-screen” (cinema format) picture with black bars at the
top and bottom.
“4:3 panscan” for a full-height picture with the sides trimmed.
“16:9”
for a wide-screen TV set (screen edge ratio 16:9)
Press OK to continue
8
Confirm with ENTER/OK.
9
After you connect the aerial (or cable TV, satellite receiver, etc.) to the DVD
recorder, press ENTER/OK.
The automatic TV channel search starts. “WAIT” will appear on the display.
Installation
Auto Ch. Programming
Problem
✘ The DVD recorder cannot find any TV stations
Searching for TV channels
✓ Select channel 1 on the TV set. Can you see the stored TV channel on the TV
set?
If not, check the cable connection from the aerial (aerial jack) to the DVD
recorder and to the TV set.
✓ Please have patience.
The DVD recorder searches the entire frequency range in order to find and save
the largest possible number of TV channels.
✓ If you have not connected an aerial, go through all the basic settings right to the
end and then, if you wish, start the automatic search (see “Automatic TV station
search”).
000 Channels found
Please wait
0
When the automatic TV channel search is complete after several minutes of wait,
“Auto ch. search complete” will appear on the TV screen.
A
To remove the menu, press the SYSTEM-MENU button on the recorder’s
remote control.
The initial installation is now complete.
21
Installing your DVD recorder
English
Automatic TV channel search
During installation, all available TV channels are searched for and stored. If the channel
assignments of your cable or satellite TV provider change or if you are reinstalling the
DVD recorder, e.g. after moving house, you can start this procedure again. This will
replace the stored TV channels with the new ones.
Installation
Auto Ch. Programming
1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
2
Switch on the DVD recorder using B/I.
3
Press SYSTEM-MENU on the remote control. The menu bar appears.
4
Select “
5
Select “Installation” using w or v and confirm with u.
6
Select “Auto Ch. Programming” using w or v.
7
Press u.
8
The automatic TV channel search starts. This allows the DVD recorder to save all
available TV channels. This procedure may take several minutes.
9
When all the TV channels have been found, “Auto ch. search complete” will
appear on the TV screen.
0
To end, press SYSTEM-MENU.
” symbol with t or u.
Searching for TV channels
000 Channels found
Please wait
You can read about how to search for a TV channel manually in “Adding and clearing TV
channels manually”.
Question
Cannot select “
”?
You need to stop the disc to select “
’.
Problem
✘ Very few TV channels were found
✓ During “Automatic channel search” the DVD Recorder detects whether an
antenna or a cable TV signal is connected. If you have connected a cable TV signal
but found very few TV channels, you must search the channels manually.
1 To do so, select “Cable/Antenna” instead of line “Auto Ch. Programming” in
step 6 and confirm with u.
2 If you select “Cable”, channels 1-125 will be available.
If you select “Anten.”, channels 2-69 will be available.
Select your type of connection by pressing u repeatedly:
“Anten.”, “Cable” or “Auto.” automatically detects which one you have.
3 Confirm the setting with OK.
4 Press SYSTEM-MENU to go to the next menu. Press OK to start channel
search as prompted by the on-screen message. When the channel search is complete, press SYSTEM-MENU repeatedly to remove all the menus.
Installing your DVD recorder
22
Adding and clearing TV channels
manually
After you have performed the automatic channel search you may not agree with the
sequence in which the individual TV channels have been allocated to the programme
positions (programme numbers).You can use this function to rearrange the TV channels
already stored or to delete TV channels you don’t want or those with poor reception.
Installation
Add/Delete Channels
...
Channel 001
Channel 002
Channel 003
Channel 004
Channel 005
Channel 006
...
Switch on the TV set. If required, select the programme number for the DVD
recorder.
2
Switch on the DVD recorder. Press the SYSTEM-MENU button on the remote
control. The menu bar appears.
3
Select “
4
Select “Installation” using w or v and confirm with u.
5
Select “Add/Delete Channels” using w or v and confirm with u.
6
Using v or w select the TV channel that you want to add or delete.
7
Confirm with u.
” symbol with t or u.
Tip
Add
Add
Delete
Delete
Delete
Delete
To exit press
SYSTEM MENU
23
1
Deleting TV channels
Unwanted channels or those with poor reception can be deleted using CLEAR.
Proceed at step 6 to continue or at 8 to finish.
8
To store, press ENTER/OK.
9
To end, press SYSTEM-MENU.
Installing your DVD recorder
English
Setting the language
You can select the country and, for DVD playback, the language for the subtitles and
the audio language. Please note that with some DVDs the audio language and/or subtitle language can be changed only via the DVD menu.
Moreover, when recording the sound of a TV channel, you can switch between stereo
and an additional language (SAP - Secondary Audio Program). See the following section
on “Switching audio recording (stereo, SAP)”.
You also have the option of setting one of the displayed languages for the on-screen
menu (OSD). However, the DVD recorder display will only display English text regardless of this setting.
1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
2
Switch on the DVD recorder using B/I.
3
Press SYSTEM-MENU on the remote control. The menu bar appears.
4
Select “
5
Select line “Language” with w or v and confirm with the u button.
6
Select the appropriate line and confirm with u.
” symbol with t or u.
n
Tip
Language
Playback audio
Recording audio
Subtitle
Menu
English
Stereo
English
English
Which settings can I choose?
Playback audio: language of the playback (audio language)
Recording audio: Type of audio recording “Stereo” or “SAP”
Subtitle: Subtitle language
Menu: Language of the OSD menu
7
Select the appropriate setting using w or v and confirm with ENTER/OK.
8
To end, press SYSTEM-MENU.
Switching audio recording (Stereo, SAP)
Some TV programs broadcast additional audio (SAP - Secondary Audio Program). In
most cases this means that an additional language is available. For example, if a program
is available in English and Spanish, Spanish can be broadcast as the additional audio program (SAP).
To record TV programs in stereo or SAP, you can select Stereo or SAP as the default
setting.
This setting does not become active until the sound of a TV program is transmitted in
Stereo or SAP.
When you playback the recording, you can playback the sound only in the setting you
selected for recording (a recording in SAP can be played back only in SAP).
n
Language
Playback audio
Recording audio
Subtitle
Menu
English
Stereo
English
English
Installing your DVD recorder
1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
2
Switch on the DVD recorder using B/I.
3
Press SYSTEM-MENU on the remote control. The menu bar appears.
4
Select “
5
Select line “Language” with w or v and confirm with the u button.
6
Select line “Recording audio” and confirm with u.
” symbol with t or u.
24
7
Select “Stereo” or “SAP” with w or v and confirm with ENTER/OK.
8
To end, press SYSTEM-MENU.
Assigning the VCR Plus+&reg; Guide
channel numbers
If you intend to use the VCR Plus+&reg; programming system, you must first assign Guide
channel numbers to the TV channels.
1
Press SYSTEM-MENU on the remote control. The menu bar will appear.
2
Select “
3
Select line “Installation” using w or v and confirm with u.
4
Select the line “VCR Plus+ Ch.” using w or v and confirm with u.
5
Use w or v to select the Guide channel number you want to assign to a TV channel.
6
Use t or u, or use the number buttons 0..9 to select the TV channel corresponding to this Guide channel number. An overview of guide numbers/TV channels can
be found in your daily newspaper or in your TV listings.
7
Confirm the allocation with ENTER/OK.
8
To end, press SYSTEM-MENU.
Installation
VCR Plus+ Ch.
VCR Plus+ Ch.
Channel
...
--001
--002
--003
--004
--005
--...
To exit press
SYSTEM MENU
25
” using t or u.
Installing your DVD recorder
English
Setting the time and date
automatically
This function uses the information sent via the local PBS channel to automatically set
the time/date. For this reason, you must enter the PBS channel that sends this additional information.
When the DVD Recorder chooses a wrong PBS channel or the displayed time/date is
wrong, you must manually set the date/time (see section “Manually setting the time &amp;
date”).
Time/date
Automatic
PBS Channel
Daylight Saving
Time Zone
Auto.
Off
Auto.
1
Press SYSTEM-MENU on the remote control. The menu bar appears.
2
Select “
3
Select “Installation” using w or v and confirm with u.
4
Select “Time/date” using w or v and confirm with u.
5
Select “Automatic” with w or v and confirm with u.
6
Select the corresponding line with w or v.
7
Select the channel which sends the time/date information in the line “PBS Channel” and confirm with ENTER/OK. The DVD Recorder will check whether or
not the information transfer is possible.
” symbol with t or u.
Problem
To exit press
SYSTEM MENU
Installing your DVD recorder
✘ “Clock not set, check channel” will appear on the TV screen
✓ No time/date data can be received from this TV channel.
Select a different channel or “Auto.” in line “PBS Channel”.
8
Select one of the following settings in line “Daylight Saving”:
“On”: The time set corresponds to summer time (summer time activated)
“Off”: The time set corresponds to the winter time (summer time is off)
9
In the line “Time Zone”, select your time zone if the PBS channel entered was for
a different time zone. This is the only way to set the time correctly, or, if necessary, to correct it.
If you want to use the time zone of the PBS channel, select “Auto.”.
0
Confirm the changes with ENTER/OK.
A
To end, press SYSTEM-MENU.
26
Manually setting the time &amp; date
If the time is incorrect, this could be due to a weak or disrupted TV signal. If this is the
case, switch off the automatic function.
Time/date
Manual
Time
AM/PM
Year
Month
Date
Daylight Saving
09:02
AM
01
01
01
Off
To exit press
SYSTEM MENU
1
Press SYSTEM-MENU on the remote control. The menu bar will appear.
2
Select “
3
Select line “Installation” using w or v and confirm with u.
4
Select line “Time/date” using w or v and confirm with u.
5
Select “Manual” with w or v.
6
Confirm with ENTER/OK.
7
Change the time in line “Time” using the number buttons 0..9 on your remote
control.
8
Check “AM/PM”, “Year”, “Month”, and “Date” in the same way.
To select between the fields, use w or v.
Change the information with t, u or the number buttons 0..9.
9
Select one of the following settings in line “Daylight Saving”:
“On”: The time set corresponds to the summer time (summer time is on)
“Off”: The time set corresponds to the winter time (summer time is off)
0
When all settings are correct, confirm with ENTER/OK.
A
To end, press SYSTEM-MENU.
” using t or u.
If the setting has been confirmed with OK the automatic system is disabled.
27
Installing your DVD recorder
English
5. On-screen information
You can check or change many of the functions and settings of your DVD recorder via
the system menu bar. The menu bar cannot be displayed during recording.
Symbols in the menu bar
Press SYSTEM-MENU to open and close the menu bar (main menu). Use t and u to
select the relevant function. Use w to confirm the function and go either to another
menu or execute the function directly.
Some functions may not be available, depending on the disc inserted.
Menu bar 1
User preferences
Title/track
Chapter/index
Audio language
Subtitle language
Camera angle
Zoom
Menu bar 2
While menu bar 1 is being displayed you can go to menu bar 2 by pressing u again.
d
Sound
Frame advance
H
Slow motion
R
Fast forward
Search by time
Field for temporary messages
The top left corner of the menu line contains a field for temporary messages relating to
the various operating modes. This information appears briefly on the screen when certain disc functions have been activated:
Shuffle
Scan
Repeat entire disc
Repeat title
On-screen information
28
Repeat track
Repeat chapter
Repeat from A to the end
Repeat from A to B
Camera angle
Child lock enabled
Resume playback
Illegal action
Status field
The status field shows the current operating mode (status) of the DVD recorder and
the type of disc inserted. This display can be disabled.
Disc type symbols
DVD+RW
DVD+R
DVD-Video
Video-CD
No disc
Error
29
On-screen information
English
Operating mode symbols
Recording
Stop
Playback
Playback-Pause
Record-Pause
Search forwards (8x speed)
Search backwards (8x speed)
Slow motion
Tuner information box
This field is located in the bottom left-hand corner of the screen. The aerial signal, the
TV channel and the TV channel name for the selected programme are displayed.
Current channel/selected input jack
No signal
The TV channel is not available/the additional device is not connected or it is switched off
Copy-protected signal
Timer information box
This box appears above the tuner information box. When a timer recording is set, it
shows the timer icon and the start time or date of the first programme to be recorded.
If no timer recording is scheduled, the current time is displayed.
This box disappears during playback of a disc or after a recording starts. However, you
can access it during an OTR recording by pressing SYSTEM-MENU.
Timer starts on the day shown
OTR recording runs until the stop time displayed
Current time
No timer event programmed
On-screen information
30
6. Playback
General notes on playback
With this DVD recorder you can play back the following systems:
•) DVD Video
•) (Super) Video CD Disc
•) DVD+RW Disc
•) DVD+R Disc
•) DVD-RW (video mode, finalized)
•) DVD-R
•) CD-R
•) CD-RW
•) Audio CD
•) MP3 CD
You can operate the video recorder using the remote control or the buttons on the
front of the DVD recorder.
Problem
✘ The display will read “PIN”
✓ The child lock has been activated for the inserted disc. Read the sections on
“Child lock” and “Releasing a disc” in the chapter on “Access control (child
lock)”.
✘ The menu on the screen is showing an “X”
✓ Some DVD discs can be manufactured so that certain steps are required before
the disc can be played, or so that only limited operation is possible during playback. When an “X” appears on the screen the selected feature is not possible.
✘ The screen is showing regional code information
✓ Since DVD films are not normally released in all parts of the world at the same
time, all DVD players have a specific regional code. Discs can be given a regional
code. If the regional codes differ between the player and the disc, playback is not
possible.
✓ The regional code is shown on the label on the back of the machine.
✓ The regional code does not apply to recordable DVD discs.
Inserting a disc
1
Press the F (Open/Close) button on the front. The disc tray will open. While
the disc tray is opening, “OPENING” and then “TRAY OPEN” when the tray is
fully open.
2
Carefully place the disc in the tray with the label facing up and press PLAY
or
F (Open/Close) “CLOSING” and then “READING” will appear in the display.
The information on the disc will be read.
Question
How do I insert a double-sided DVD?
Double-sided discs do not have labelling over the whole surface. The labelling for
each side is in the centre of the disc. To play a side its label must be facing up.
Tip
Opening/closing the tray using the remote control
You can open and close the disc tray using the remote control.
Press and hold the STOP
button on the remote control until the dialog box
shows “OPENING” or “CLOSING”.
3
31
Playback starts automatically.
Playback
English
A menu may appear when a DVD is played back. If the titles and chapters are numbered, press a number button on the remote control.You can also use the t, u, v, w
buttons or number buttons 0..9 to select a menu item and confirm with ENTER/OK.
You can also access the menu using TOP-MENU on the remote control.
For further information see “Playing a DVD video disc”.
When a DVD+RW is played back the index overview appears. Using w, v, t, y
select the title you want to play back.
Confirm with ENTER/OK.
For further information see “Playing back a DVD+RW/+R Disc”.
If playback does not start automatically, press PLAY
For further information see “Playing an audio CD”.
DIGITAL VIDEO
.
If the “A” symbol appears in the display, start playback by pressing PLAY .
If a menu appears on the screen, use the remote control buttons indicated on the
screen to select the menu option you want (PREV=t, NEXT=y) or with the number buttons 0..9.
For further information see “Playing a (Super) Video CD”.
Playing a DVD video disc
1
If playback does not start automatically, press PLAY
This will appear on the display:
title, chapter, elapsed time.
2
To stop playback, press STOP
recorder.
3
To eject the disc, press F (Open/Close) on the front of the DVD recorder.
.
on the remote control or A on the DVD
Playing a DVD+RW/ +R disc
1
If the disc is write-protected or a finalised DVD+R disc, playback starts automatically.
2
If playback does not start automatically, use the w or v button to select the title
you want to play on the index screen.
You can also use the t or y button on the front.
3
Press the PLAY
button.
This will appear on the display:
title number, recording quality.
Problem
✘ I can see the message “EMPTYDISC”
✓ The disc does not contain any recordings.
Playback
4
To stop playback, press STOP
recorder.
5
To eject the disc, press F (Open/Close) on the front of the DVD recorder.
on the remote control or A on the DVD
32
Question
What should I note when playing back different recording types (qualities)?
The correct recording quality “M1, M2, M2x, M3, M4, M6, FR” will automatically
be selected during playback.
For more information see the section on “Selecting the recording type (quality)” in
the chapter on “Manual recording”.
Playing an audio CD
You can also use the DVD recorder to play audio CDs
1
Insert an audio CD. Playback starts automatically.
Tip
Audio CD display
If the TV is on, the audio CD screen appears automatically.
During playback, the current track number and its elapsed playing time will show on
the TV screen and on the recorder display.
2
Stop playback using STOP
played.
. The number of tracks and the total time are dis-
Playing an MP3 CD
MP3 (MPEG1 Audio Layer-3) files are highly compressed music files. Using this technology the data volume can be compressed by a factor of 10. This means it is possible to
record 10 hours of music in CD quality on a single CD-ROM.
When creating MP3 CDs please note the following:
File system: ISO9660
Directory structure: maximum of 8 levels
Formats: *.mp3
Filenames: maximum of 12 characters (8+3)
Maximum of 32 albums, 999 titles
Supported sampling frequencies: 32, 44.1, 48 (kHz). Music with sampling frequencies
other than these will be skipped.
Supported bit rates: 32, 64, 96, 128, 192, 256 (kbit/s)
ID3 Tag:Version 1, 1.1. In later versions the directory name is displayed as the album
and the filename as the title.
33
Playback
English
Important notes for playback:
In accordance with SDMI (Secure Digital Music Initiative), the digital audio output is
turned off during MP3 playback.
Only the first session of a multi-session CD will play back.
1
Insert an MP3 CD. Playback starts automatically.
Tip
MP3 CD display
If the TV is on, the MP3 CD screen appears automatically.
During playback, the current track number and its elapsed playing time will show on
the TV screen and on the recorder display.
Further information on the album, track and artist will also be displayed if included
in the ID tag.
2
Stop playback using STOP
. The number of albums is displayed in the display.
Tip
Additional playback features
Using t or y select the next or previous title.
You can also use the TITLE/CHAP button to select titles and albums.
1 Press the TITLE/CHAP button and use the u or t button to select the “T”
symbol for title or “C” for chapter.
2 Use the w or v buttons or the number buttons 0..9 on the remote control to
select the number of the title/chapter.
You can also use the repeat functions (REPEAT button).
Playing a (Super) Video CD
(Super) Video CDs may be equipped with PBC (Play Back Control). This means that
special playback functions (menus) can be directly selected. The video CD must be PBC
compatible (see CD case). When PBC is active, no information will be shown on the
DVD recorder display.
“PBC” is active in the default settings.
1
Playback
Insert a (Super) Video CD.
If the “ ” symbol appears in the display, start playback by pressing PLAY
.
2
If a menu appears on the screen, use the remote control buttons indicated on the
screen to select the menu option you want (PREV=t, NEXT=y) or with the
number buttons 0..9.
If a PBC menu consists of a list of titles, you can select a title directly.
3
Use RETURN to go back to the previous menu.
4
Stop playback using STOP
.
34
7. Additional playback features
Changing to another title/chapter
If there is more than one title or chapter on a disc you can change to another title or
chapter as follows. However if there are several chapters within a title, these will be
selected. The title can then still be selected via the menu bar.
1
During playback, press y to go to the next title/chapter. Press t to return to
the start of the current title/chapter. Press t twice to return to the start of the
previous title/chapter.
Tip
Use the TITLE/CHAP (title/chapter) button
1 Press TITLE/CHAP (title/chapter) and then use v or w to select the appropriate title.
Make sure the symbol “ ” (title) is selected in the menu bar.
2 Use TITLE/CHAP to select chapters within a title. Press TITLE/CHAP and
use u to select the “ ” symbol (chapter).
Now select the appropriate chapter with v, w or digit keys 0..9.
Searching a disc
You can search the disc at 4x or 32x playback speed. Other speeds can only be selected
via the menu bar (“R”).
1
During playback, press and hold e (reverse) or r (forwards) to switch to the
search feature.You can switch between the playback speeds using e/r.
2
To continue playback, press PLAY
at your chosen location.
Problem
✘ No sound
✓ The sound is switched off in search mode. This is not a fault in your machine.
Tip
Search feature via menu bar
1 During playback press SYSTEM-MENU on the remote control. The menu bar
will appear at the top of the screen.
2 Select the “R” symbol using u or t and confirm with w.
3 You can now use the t or u button to select different forward and backward
search speeds.
4 If necessary, switch the menu bar off with the SYSTEM-MENU button.
5 To continue playback, press PLAY
35
.
Additional playback features
English
Still picture
1
During playback, press PAUSE to stop playback and display a still picture.
It will proceed to a next frame when you press PAUSE again.
Tip
Frame advance via menu bar
1 During a still picture press SYSTEM-MENU on the remote control.
The menu bar will appear at the top of the screen.
2 Select the “
” symbol using u or t and confirm with w.
3 You can now use the t or u button to go forwards or backwards one frame at a
time.
4 If necessary, switch the menu bar off with the SYSTEM-MENU button.
2
To continue playback, press PLAY
.
Slow motion
1
During playback press PAUSE
to switch to slow motion.
2
You can switch between different speeds using e or r.
on the remote control. Now press e or r
Tip
Slow motion via menu bar
1 During playback press PAUSE and then SYSTEM-MENU on the remote
control. The menu bar will appear at the top of the screen.
2 Select the “H” symbol using u or t and confirm with w.
3 You can now use the t or u button to select different forward and backward
slow motion speeds.
4 If necessary, switch the menu bar off with the SYSTEM-MENU button.
3
To continue playback, press PLAY
.
Search by time
Using this feature you can select where playback should start (select elapsed time).
1
During playback press SYSTEM-MENU on the remote control. The menu bar
will appear at the top of the screen.
2
Select the “ ” symbol using u or t and confirm with w.
Playback is stopped and a box appears on the screen showing the elapsed time.
3
Enter the start time with the digit keys 0..9 from where playback should start.
4
Confirm with ENTER/OK.
Problem
✘ The time entered will flash on the screen
✓ The selected title is shorter than the time entered. Enter a new time.
5
Additional playback features
Playback starts at the time you entered.
36
Repeat play
You can mark entire sections or the whole disc for endless playback. Depending on the
type of disc (DVD video, DVD+RW, video CD) you can select a chapter, title or the
entire disc. DVD+RW and DVD+R cannot repeat an entire disc.
1
Select the desired chapter, title or the entire disc and start playback.
2
During playback, press REPEAT. By pressing REPEAT recurrently you can make
a choice from the following options:
•) “
”: repeat chapter (DVD only)
•) “
”: repeat track/title
•) “
”: repeat entire disc
•) Display disappears: no repeat
3
To end the repeat, press the STOP
button.
You can also keep pressing the REPEAT button until the displays disappear.
Repeating a passage (A-B)
To repeat or loop a sequence in a title:
1
Press A-B at your chosen starting point;
appears on screen.
2
Press A-B again at your chosen end point;
repeat appears on screen, and the repeat sequence begins.
3
To exit the sequence, press A-B.
Shuffle
DVD Discs
This shuffles the playing order of chapters within a title, if the title has more than one
chapter.
1
Press SHUFFLE during playback.
2
To return to normal playback, press SHUFFLE again.
Video CDs
This shuffles the playing order of tracks within a disc, if the disc has more than one
tracks.
1
Press SHUFFLE during playback.
2
To return to normal playback, press SHUFFLE again.
Scan feature
This feature plays back the first 10 seconds of each chapter (DVD) or track (CD).
37
1
During playback, press SCAN.
2
After 10 seconds the DVD recorder switches to the next chapter/index. To start
playback at the relevant chapter/index press PLAY .
Additional playback features
English
Camera angle
If the disc contains sequences recorded from different camera angles, the angle box
appears, showing the number of available angles, and the angle being shown.You can
then change the camera angle if you wish.
1
Press ANGLE.
2
Use w or v to select the required angle in the angle box.
3
To go to any angle directly, enter the angle number using the numerical keys 0..9.
After a small delay, play changes to the selected angle. The angle box remains displayed until multiple angles are no longer available.
Tip
You can also use this function through an on-screen menu (a system menu bar).
Zoom feature
The Zoom function allows you to enlarge the video image and to pan through the
enlarged image.
1
Press Zoom.
2
Press w or v to activate the Zoom function and select the required zoom factor;
1.33 or 2 or 4.
The recorder will go into pause mode.
The selected zoom factor appears below the Zoom icon in the system menu bar
and “Press OK to pan” appears below the system menu bar.
The picture will change accordingly.
3
Press ENTER/OK to confirm the selection.
The panning icons appear on the screen.
4
Use v, w, u, t to pan all over the screen.
5
When ENTER/OK is pressed only the zoomed picture will be shown on the
screen.
6
Press
to exit zoom mode.
Tip
You can access to Zoom function by an on-screen menu (a system menu bar).
Additional playback features
38
Select the audio language
Many pre-recorded DVD discs have more than one audio language. The language initially selected for playback will be the one you selected when you first set up the DVD
recorder. However you can change the audio language of the inserted disc at any time.
You can change the audio language either using the menu of the inserted disc
(TOP MENU button) or the AUDIO button. The audio languages for DVD playback
in the two menus may be different. Please note that with some DVDs the audio language and/or subtitle language can be changed only via the DVD menu.
1
During playback press AUDIO.
2
Select the required audio language by pressing AUDIO repeatedly.
3
Play continues in the new audio language.
Tip
You can select an audio language in an on-screen menu (a system menu bar).
Subtitles
Many pre-recorded DVD discs have more than one subtitle language. The language initially selected for playback will be the one you selected when you first set up the DVD
recorder.
However you can change the subtitle language of the inserted disc at any time.
The subtitle languages in the menus may differ.
1
During playback press SUBTITLE.
2
Select the required subtitle language by pressing SUBTITLE repeatedly.
3
Playback continues in the new subtitle language.
Tip
An access to SUBTITLE function through the on-screen menu
1 During playback press SYSTEM-MENU and select the “Z” icon using u.
2 Select the required subtitle language using SUBTITLE or w, v.You can also
enter the number directly using the number buttons 0..9.
You can switch off subtitles by pressing 0 or by selecting “off”.
3 Playback continues in the new subtitle language.
Tip
An access to SUBTITLE function through the top menu of the disc
1 Press TOP MENU to go to the top menu of the disc.
2 Follow the disc’s instruction.
39
Additional playback features
English
8. Manual recording
General
Question
Which discs can I use for recording?
With this DVD recorder, you can record on two types of DVD:
DVD+RW
This disc can be written to and then the contents deleted.
DVD+R
This type of disc can only be recorded once.
If you want to play this DVD in a DVD player it must be finalized using the “Finalise
disc” function. It is not possible to make further recordings using this disc.
If this disc is to be played in a DVD recorder it must not be finalised.
Recordings can be added and deleted. The disc space (playback time) from the
deleted recording cannot be recovered for further recordings
Use the “Manual recording” function to spontaneously start recording (e.g. to record a
TV show already in progress).
In the “index display” select the title to be overwritten or “Empty title” with w, v.
If you insert recordings between existing recordings, check the lengths of the old and
new recordings. If the new recording is too long the subsequent recording (title/chapter) will be overwritten.
Tip
Insert new recordings at the end of all existing recordings (Safe Record)
To add a new recording at the end of the last recording on the disc, hold down the
REC S button until the message “SAFE REC” appears on the display.
For DVD+R discs each new recording is always added at the end of all previous
recordings as existing recordings cannot be overwritten.
End of disc is reached
If the end of a disc is reached during recording, recording will stop and the
Recorder will turn itself off automatically.
Please refer to section “Recording without automatic switch-off ”, if you want to
manually start and stop your own recording.
If you want to start a recording manually but have it stopped automatically, read the
section “Recording with automatic switch-off ”. (e.g. not to record to the end of
the disc)
Read the section “Direct record” if you want to record a programme currently
being shown.
Manual recording
40
Recording without automatic
switch-off
1
Switch on the TV set and select the programme number for the DVD recorder.
2
Insert a disc on which the recording is to be made. This disc is then checked for
content and system. “READING” will appear on the display.
Problem
✘ Index display
✓ A DVD+RW disc has been inserted that already contains recordings. Use the v
or w button to select the point where the recording is to start.
✘ The message “EMPTYDISC” appears in the display
✓ The disc inserted is a blank DVD disc.
✘ A dialog box appears asking you whether you want to delete the
contents or eject the disc
✓ The disc inserted is a DVD+RW but its contents are not DVD video-compatible
(e.g. a data disc). Recordings on this disc can only be made if the entire disc is
first deleted with the REC S button.
✘ The message “Too many titles” appears on the screen if a recording is to be made
✓ A disc may contain a maximum of 48 titles (including blank titles). Delete titles
or change the disc.
3
If necessary, use the MONITOR button on the remote control to switch to the
internal tuner in the DVD recorder.
4
Use CH+ or CH- to select the programme number (station name) you want to
record. This will appear on the display:
Tip
Programme number of the external inputs:
“EXT2” SVHS jack (Y/C) S-VIDEO IN Video jack (CVBS) Video in, Audio jack
IN L AUDIO R for SVHS-jack and Video jack.
Switching between jack S-VIDEO IN and Video in is done automatically.
In case both jacks are occupied, the signal at jack S-VIDEO IN is given
priority.
“EXT1” Component Video jacks on the back IN COMPONENT VIDEO, Audio
jacks IN AUDIO LR for Component Video
“CAM1” SVHS-/Audio front jacks S-VIDEO / left AUDIO right
“CAM1” Video/Audio front jacks A/V VIDEO / left AUDIO right Switching
between jack S-VIDEO and VIDEO is done automatically. In case both
jacks are occupied, the signal at jack S-VIDEO is given priority
“CAM2” Digital video (i.Link) front jack DV IN
5
To start recording, press REC S on the remote control or REC on the DVD
recorder.
If you want to start the recording at the end of the existing recordings, hold down
the REC S button until the message “SAFE REC” appears on the display.
For DVD+R discs each new recording is always added at the end of all previous
recordings as existing recordings cannot be overwritten.
This will, for example, appear in the display:
41
Manual recording
English
Tip
Insert chapter markers
During recording you can mark scenes so you can find them or hide them later.
During recording, press EDIT at the start point. “Inserting chapter marker”
appears on the TV screen. In the display, the number of the “CHAPTER” increases
by one.
For further information on titles and chapters, see the section on “Changing to
another title/chapter” in “Additional playback features”.
6
Use the STOP
button on the remote control or A on the machine to stop
the recording. “MENU UPDT” will appear on the display.
The DVD recorder is writing the list of contents. Wait until the message disappears from the display. The recording is then complete.
Problem
✘ The display will read “DISC ERR”
✓ Recording could not be completed correctly because of a disc error. Check the
disc and clean it if necessary.
Tip
Making recordings on DVD+R discs compatible
If you want to play back the recording on a DVD player, you need to finalise the disc
in the DVD recorder.You can prepare your DVD for use in a DVD player using the
“Finalising” feature. See “Finalising DVD+R discs” in “Managing the disc contents”.
Interrupt recording (Pause)
1
During recording press PAUSE
cials.
2
To continue recording, press REC S.
, for example to avoid recording the commer-
Tip
End recording
To end the recording, press the STOP
pears from the display.
Manual recording
button. Wait until “MENU UPDT” disap-
42
Recording with automatic switch-off
(OTR one-touch-recording)
1
Insert a disc.
2
If necessary, use the MONITOR button on the remote control to switch to the
internal tuner in the DVD recorder.
3
Use CH+ or CH- to select the programme number (channel name) you want to
record.
4
Press REC S on the remote control.
5
Each time you press REC S you will add 30 minutes to the recording time.
Question
How can I cancel the recording time I have just entered?
To delete an entry, press CLEAR while the display shows the recording time.
How can I check the remaining recording time?
Press SYSTEM-MENU while an OTR is in progress. The time at which the
recording will end will appear on the TV screen in the timer info box.
43
Manual recording
English
m
Preventing accidental erasing of
discs
To ensure you don’t accidentally delete a recording you can protect the entire disc.You
can only ever protect the entire disc.You cannot protect individual recordings.
Question
What happens with DVD+R discs?
As long as these discs are not finalised, they can be protected against accidental erasure in the same way as DVD+RW discs.
1
Insert the disc to be protected.
2
Press DISC-MENU. The index screen will appear.
3
While the index screen is displayed press STOP
first title is highlighted.
4
Press v. This takes you to the disc info screen.
5
Press the u button.
Select the “Protection” line.
Confirm with u.
6
Select “Protected” with the w button and confirm with ENTER/OK.
7
Press t and then TOP MENU to terminate.
on the remote control. The
The entire disc is now protected.
If an attempt is made to record on a protected disc, “DISC LOCK” will appear on the
display and “Disc locked” will appear on the screen.
Tip
If you later decide to record on the disc, follow these steps but select “Unprotected” at step 6.
Manual recording
44
Lining up recordings within a title
(assemble cut)
On a recorded DVD+RW disc you can add another recording to an existing title. This
recording is added to the title as a “chapter”. The existing information will be overwritten starting from this point. Titles will also be overwritten that follow the current title
depending on the length of the new recording. The recording type (Quality) will be
taken from the current title.
To play back this recording, press SYSTEM-MENU and use the u button to select the
“C” (Chapter) symbol.You can also use the TITLE/CHAP key.
For further information, see “Changing to another title/chapter” in “Additional playback
features”.
Question
What happens with DVD+R discs?
New recordings on “DVD+R” discs can only be added after existing recordings.
It is not possible to overwrite existing recordings on “DVD+R” discs.
45
1
In the index display, find the title to which the new recording is to be added.
2
Look at the last minute of the old recording.
3
Press PAUSE on the remote control at the position where the new recording
is to go. “D” will appear on the screen.
4
To monitor the recording you can press MONITOR to switch to the internal
tuner.
5
Now start recording as usual by pressing REC S on the remote control.
The new recording will be inserted.
6
Stop recording with STOP
.
Manual recording
English
Selecting the recording type
(Quality)
You can select the picture quality of the recording using the recording quality feature
and hence the maximum recording time per disc.
You can check the quality by changing the recording mode and then watching the picture from the built-in tuner (MONITOR button).
When you playback the recorded material, the adequate playback mode for the
selected recording type will apply automatically.
1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
Select the record mode with the button REC MODE on the remote control.
Tip
Which recording types can I choose?
“M1”: High Quality offers the best picture and sound quality and a recording time
of 1 hour.
“M2”: This mode offers the best quality audio and standard play (close to prerecorded DVD) quality video.
“M2x”: Standard Play plus (better than S-VHS quality) offers standard picture quality and a recording time of 2.5 hours.
“M3”: Long Play (S-VHS picture quality). Recording time of 3 hours.
“M4”: Extended Play (better than VHS picture quality). Recording time of 4 hours.
“M6”: Super Long Play (VHS picture quality). Recording time of 6 hours.
Can I select the recording type via a menu as well?
1 Press the SYSTEM-MENU button.
2 Select “
” symbol with t or u.
3 Select “Record settings” using v or w and confirm with u.
4 In the line “Record mode” select the recording type with t or u.
5 Confirm using ENTER/OK and SYSTEM.
6 If you have selected the recording mode “M4” or “M6”, you can select the settings “Stndrd” (Standard) or “Sport” (for rapid movements) in the “Filter
mode” line.
Manual recording
46
9. Managing the disc contents
General
Charly 1
00:29:59•M1
Fri15/02/2003
Empty title
01:30:01
When a recording is made to disc, the following additional information is also stored at
the beginning of the recording:
•) Name of the recording
If the TV station does not transmit a name, only the channel number and time will be
stored as the name
•) Length of the recording
•) Record type (Quality)
•) Date of the recording
•) Index picture of the recording
A marker will be set every 5-6 minutes if the “Auto chapters” function is activated in
the “Record settings” menu. This marker is known as a “chapter”.
These markers can be changed when the recording has finished.
Question
Can markers be set on a DVD+R disc?
Markers can be set on these discs if they have not been finalised.
It is also possible to add “chapters” later. This means that scenes you do not want to
see during playback, such as commercials, can be hidden or skipped. During playback
you can watch your recording as a continuous sequence without the hidden chapters.
Select from the following chapters:
“EDIT”,
to divide the title into chapters or to manage the chapters.
“Editing recording titles (name)”,
to change the recording names.
“Play complete title”,
to play the entire title including the hidden chapters.
“Delete recording/title” to delete the relevant title and therefore also the recording.
“Disc settings” to change the general settings of the disc.
EDIT
In this menu you can adapt a title to suit your particular needs.
You can insert/delete chapter markers, hide chapters, select a new index, or split up a
title.
47
Managing the disc contents
English
Insert chapter markers
During playback, you can set or delete chapter markers within a title.
The maximum number of chapters per disc is 124 and 99 per title. If one of these limits
is reached the following message will appear on the screen: “Too many chapters”.You
need to delete some markers before you can insert new ones or make recordings.
1
1
During playback, press EDIT on the remote control at the appropriate point. The
“EDIT” menu appears on the TV screen.
2
Press v or w to select “Inserting Chapter marker” and confirm with ENTER/
OK. “Inserting chapter marker” appears on the TV screen.
1
EDIT menu
Insert chapter marker
Press OK
Current chapter
Visible
Delete chapter marker
Tip
Delete all markers
New index picture
“X” will appear on the screen:
This DVD is write-protected or the disc is a finalised DVD-R. Subsequent changes
cannot be made.
Divide title
Press EDIT to exit
3
To stop this function, press EDIT.
Hiding chapters
Initially, all the chapters are visible.You can hide chapters for playback (e.g. advertisements) or make them visible again. In editing mode, hidden chapters are shown as
dimmed.
1
1
1
While the relevant chapter is playing, press EDIT on the remote control. The
“EDIT menu” appears on the TV screen.
EDIT menu
Tip
Insert chapter marker
Press OK
Current chapter
Visible
How can I select different chapters?
Delete chapter marker
1 Press the TITLE/CHAP button on the remote control. Titles and chapters are
displayed at the top of the screen.
Delete all markers
New index picture
Divide title
2 Select title (T) or chapter (C) with u or t.
Press EDIT to exit
3 Use v or w to select the title/chapter channel you want to edit.
2
Select “Current chapter” using w.
3
Using u select “Hidden”. The picture is shown darker.
Tip
Switching quickly
You can switch between show chapters (“Visible”) and hide chapters (“Hidden”)
quickly and easily using SELECT.
4
To end, press EDIT.
During playback this chapter will be skipped.
If the chapter is not visible, select “Visible” in step 3 with u.
Managing the disc contents
48
Deleting chapter markers
Within a title you can delete either all markers or individual markers.
1
1
1
While the relevant chapter is playing, press EDIT on the remote control. The
“EDIT menu” appears on the TV screen.
EDIT menu
Insert chapter marker
Press OK
Current chapter
Visible
Tip
How can I select different chapters?
1 Press the TITLE/CHAP button on the remote control. Titles and chapters are
displayed at the top of the screen.
Delete chapter marker
Delete all markers
New index picture
2 Select title (T) or chapter (C) with u or t.
Divide title
3 Use v or w to select the title/chapter channel you want to edit.
Press EDIT to exit
2
Use w to select either “Delete chapter marker” for this chapter or “Delete all
markers” for all chapters within the selected title.
3
Confirm with ENTER/OK.
4
To end, press EDIT.
Changing the index picture
As an index picture, the first picture of a recording is normally used, however, you can
choose any picture from the recorded material.
1
1
During playback, search for location of the new index picture. Press the
PAUSE button.
2
Press the EDIT button. The “EDIT menu” appears on the TV screen.
3
Select line “New index picture” and confirm with ENTER/OK.
4
Start the change with ENTER/OK. “Updating menu” appears on the TV screen.
1
EDIT menu
Insert chapter marker
Press OK
Current chapter
Visible
Delete chapter marker
Delete all markers
New index picture
Divide title
Press EDIT to exit
Once the revision has been completed successfully the DVD recorder reverts to the
index overview.
Splitting titles
You can split a title into several sections (titles) of any size. Each of these sections
(titles) is identified by its own index.
Note: This split cannot be undone.
Question
Can I split titles on DVD+R discs?
As recordings on DVD+R discs cannot be overwritten, it is not possible to split
titles.
1
1
While the relevant title is playing, press EDIT on the remote control. The “EDIT
menu” appears on the TV screen.
2
Select “Divide title” and confirm with the ENTER/OK button.
3
If you are sure, press ENTER/OK to start the process. “Dividing title” appears
on the TV screen.
4
Wait until the new title is displayed with an index picture in the index picture
overview.
1
EDIT menu
Insert chapter marker
Press OK
Current chapter
Visible
Delete chapter marker
Delete all markers
New index picture
Divide title
Press EDIT to exit
The process of splitting the title is now complete.
49
Managing the disc contents
English
Editing recording titles (name)
Some TV stations transmit the title (name) of a programme. In this case, the name will
be included automatically (e.g. “ROCKY”). Otherwise, the only the programme number
(programme name) and the time are stored as the name of the recording. The name of
the recording can only be changed after the recording has been completed.
1
Press the STOP
2
Using v or w select the title whose name you want to edit and confirm with u.
The menu for editing names appears.
3
Select “Name” using v or w and confirm with u.
4
Using u or t select the position where the letter/number/icon is to be changed/
re-entered.
5
Change the icon using v or w.You can switch between upper and lowercase using
SELECT.You can delete the character using CLEAR.
6
Repeat 4 and 5 until you have made the changes you want.
7
Save the new name with ENTER/OK. “Storing name” appears on the TV screen
for confirmation.
8
To end, press t.
Setting for title Charly 1
Name
Play full title
Erase this title
Charly 1
button to stop playback if necessary.
Playing the entire title
If you have hidden certain sections (chapters) of a title, this setting lets you watch the
entire title including the hidden sections. To do this, proceed as follows:
1
Press the STOP
2
Using v or w select the title you want to play entirely and confirm with u. The
title editing menu will appear.
3
Select “Play full title” using v or w and confirm with ENTER/OK.
4
Playback starts automatically. The full title plays, including the hidden chapters.
Setting for title Charly 1
Name
Play full title
Erase this title
Charly 1
Press OK
button or during playback press TOP MENU.
Deleting recordings/titles
You can delete specific recordings from a disc. To do this, proceed as follows:
1
Press the STOP
2
Using v or w select the title you want to delete and confirm with u. The title
editing menu will appear.
3
Select “Erase this title” using v or w and confirm with ENTER/OK. “This will
completely erase this title” appears on the TV screen.
4
If you want to delete this title, press ENTER/OK to confirm. Otherwise press t.
5
“Erasing title” may appears on the TV screen.
6
At this point “Empty title” may appears in the “index picture display”. A new
recording can now be made here.
If the deleted title was very short (less than 1 minute) “Empty title” will not
appear at this point.
Setting for title Charly 1
Name
Play full title
Erase this title
Charly 1
Press OK
Managing the disc contents
button or during playback press TOP MENU.
50
Question
Can titles be deleted from a DVD+R disc?
Titles on DVD+R discs are only marked as deleted. “Deleted title” will appear in
the display instead of “Empty title”. During playback the “deleted” title is skipped.
The space used for this title cannot be used again as the title has not been physically
deleted. Once the disc has been finalised no further changes can be made.
Disc settings
Locked
Yamaha 1
00:35:59 used
Fri15/02/2003
NTSC
DVD playback
Edit
This screen appears before the first title and contains general information about the
current disc.
You can:
•) change the name of the disc
•) activate or deactivate write protection on the disc
•) Finish editing (make the disc DVD compatible)
•) finalise a DVD+R
•) delete a DVD+RW
To get to this display, proceed as follows:
1
Press the STOP
2
Select the first title with v or press STOP
3
Press the v button. The disc info display will appear.
button or during playback press TOP MENU.
.
Changing the disc name
Settings for Yamaha 1
Disc name
Protection
Erase disc
Make edits compatible
1
In the “Disc info display” press u. The “Settings for” menu appears on the TV
screen.
2
Select “Disc name” using v or w and confirm with u.
3
Using u or t select the position where the letter/number/icon is to be changed/
re-entered.
4
Change the icon using v or w.You can switch between upper and lowercase using
SELECT.You can delete the character using CLEAR.
5
Repeat 3 and 4 until you have made the changes you want.
6
Save the new title with ENTER/OK. “Storing name” appears on the TV screen
for confirmation.
7
To end, press t.
Yamaha1
Unprotected
Finishing editing
If one or more titles have been edited a DVD player may still display the original titles.
You can prepare your disc in such a way that a DVD player will be able to play the
edited version.
51
1
In the “Disc info display” press u. The “Settings for” menu appears on the TV
screen.
2
Select “Make edits compatible” using v or w and confirm with ENTER/OK.
Managing the disc contents
English
Problem
✘ “Make edits compatible” does not appear
✓ Your disc is already compatible. There is no need for conversion.
To end, press SYSTEM-MENU.
3
The screen displays “This will take” to show how long the process will last.
4
To confirm press ENTER/OK. “Working” appears on the TV screen. A bar will
move from left to right indicating progress.
Finalising DVD+R discs
This feature is required to play back a DVD+R disc in a DVD player. Once the disc has
been finalised no further recordings or changes can be made.
1
In the “Disc info display” press u. The “Settings for” menu appears on the TV
screen.
2
Select “Finalise disc” using v or w and confirm with ENTER/OK.
Problem
✘ “Finalise disc” does not appear
✓ Either there is no DVD+R disc inserted or the disc is already finalized.
To end, press SYSTEM-MENU.
✘ The “Settings for” menu does not appear
✓ The menu may not appear if the disc has been recorded on another DVD
recorder. In this case, use the “Finalise disc” feature in the “
“Disc features”.
3
” menu, under
When finalizing is complete, you will return to index picture screen.
Delete DVD+RW discs
1
In the “Disc info display” press u. The “Settings for” menu appears on the TV
screen.
2
Select “Erase disc” using v or w and confirm with ENTER/OK.
“This will erase all titles” appears on the TV screen. Press ENTER/OK to confirm. Otherwise press t.
3
“Erasing disc” appears on the TV screen.
4
After deletion, the index picture display shows the free space on the disc.
Settings for Yamaha 1
Disc name
Protection
Erase disc
Yamaha1
Unprotected
Press OK
Tip
If the disc is empty already, you cannot select “Erase disc”.
Managing the disc contents
52
10. Programming a recording (TIMER)
General
Use “Programming a recording (TIMER)”, to automatically start and stop a recording at
a later date.
The DVD recorder will switch to the right programme number and begin recording at
the correct time.
With this DVD recorder, you can pre-programme up to six recordings within a period
of one month.
To make a programmed recording, your DVD recorder needs to know:
* the date you want to make the recording
* the programme number of the TV channel
* the start and stop time of the recording
* the recording mode (“M1/M2/M2x/M3/M4/M6/FR”)
This information is saved in a “TIMER block”.
Before you begin, make sure the clock is set. If the clock is not set, the “Time/Date”
menu will appear when you press the TIMER button.
Question
What is “FR mode”?
FR mode is used when you want to record a certain length of program but you
don’t know how much room remaining on the recording disc. By using this mode,
this unit automatically selects the best suitable recording mode for the length of the
program. You cannot select FR mode, when you set the recording timer of Mo-Fr/
Weekly, and when you set PDC/VPS on. We strongly recommend that you do not
use this function combined with VPS/PDC. In such a condition this DVD recorder
may not perform the task properly.
53
Programming a recording (TIMER)
English
Programming recordings with the
VCR Plus+&reg; System
Thanks to this programming system, you no longer need to tediously enter the date,TV
channel, start and end times. All the information needed for programming is contained
in the PlusCode programming number. This 8-digit PlusCode number is found in most
TV listings for magazines.
1
Switch on the TV. Select the channel number for the DVD Recorder (channel 3 or
4 or the Audio/Video In channel).
2
With the Recorder on, press TIMER on the remote control.
The programming method selected last is marked.
3
Select line “VCR Plus+ system” using w or v and confirm with u.
4
Enter the entire PlusCode number. This number is up to 9 digits long and can be
found next to the start time of the TV program in your TV listings magazine.
e.g.: 5-234-89 or 5 234 89
Enter 523489 for the PlusCode number.
If you make a mistake, you can clear the entry with CLEAR.
Timer
VCR Plus+system
Tip
Selecting daily/weekly recordings
Using SELECT, select from the following options:
“Mo-Fr”: Repeated daily recordings (Monday to Friday).
“Weekly”: Repeated weekly recordings (every week on the same day).
PlusCode number
---------
5
Mo-Fr/Weekly
Press SELECT
To store
Press OK
Confirm with ENTER/OK.
Problem
✘ The following message appears on the screen: “Please enter channel number”
✓ The channel number of the TV channel has not yet been assigned to the PlusCode number. Using u, t or the number buttons 0..9 on the remote control,
select the corresponding channel number (name) of the TV channel and confirm
with ENTER/OK.
✘ The following message appears on the screen: “PlusCode number
wrong”
✓ The entered PlusCode number is incorrect. Repeat your entry or cancel using
the SYSTEM-MENU button.
✓ Check the time/date (see “Setting the time &amp; date” in “Installing your DVD
recorder”).
✘ The following message appears on the screen: “Date does not
match Mon-Fri”
✓ A daily recording was entered for the wrong day. Daily programming can only be
used for recordings to be made from Monday to Friday.
6
Timer
VCR Plus+system
Rec
Date Ch. Start
End
Mode
01/22 001 08:30AM 10:00PM M1
The decoded data appears after confirmation.You can go back and change the
data. Select the appropriate input field with u or t. If required, make changes
using w, v or the number buttons 0..9.
To store
Press OK
Programming a recording (TIMER)
54
Tip
Change “AM/PM”
Use the SELECT button to select “AM” or “PM” in the input fields “Start” and
“End”.
Changing the recording mode
Select “RecMode” using u.
Using w, select the recording mode “M1, M2, M2x, M3, M4, M6, FR”.
7
If all information is correct, press the ENTER/OK button. The programming
information is stored in a TIMER block.
8
To end, press TIMER.
9
Insert a recordable disc (one without write protection).
The disc you have inserted will be checked.
0
Switch the DVD recorder off with B/I.
The programmed recording will only function properly if the DVD recorder has
been switched off using the B/I button.
If any of the TIMER blocks are in use, “TIMER” will light up on the recorder display.
Programming recordings without
the VCR Plus+&reg; System
1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
2
Press TIMER on the remote control.
The programming method selected last is marked.
3
Select line “Timer programming” with w or v. and confirm with the u button.
The information will appear on the screen.
4
Select the input field with t or u.
5
Enter information with w or v or with the number buttons 0..9.
Timer
Timer programming
Rec
Date Ch. Start
End
Mode
01/22 01 08:30AM 10:00PM M1
Tip
Mo-Fr/Weekly
Press SELECT
Selecting daily/weekly recordings
In “Date” use SELECT to select from the following options:
“Mo-Fr”: Repeated daily recordings from Monday to Friday
“Mo”: Repeated weekly recordings (every week on the same day, e.g. Monday).
To store
Press OK
Program numbers of the “EXT1” and “EXT2” cinch jack
You can also program recordings from external sources via S-VIDEO IN,Video in
(“EXT1”) or IN COMPONENT VIDEO (“EXT2”).
Change “AM/PM”
Use the SELECT button to select “AM” or “PM” in the input fields “Start” and
“End”.
Changing the recording quality
Select the “RecMode” input field using u.
Use w, v to select the recording mode.
55
6
If all information is correct, press the ENTER/OK button. The programming
information is stored in a TIMER block.
7
To end, press TIMER.
8
Insert a DVD (one without write protection).
The disc you have inserted will be checked.
Programming a recording (TIMER)
English
9
Switch off with B/I.
The programmed recording will only function properly if the DVD recorder has
been switched off using the B/I button.
If any of the TIMER blocks are in use, “TIMER” will light up on the recorder display.
How to change or delete a
programmed recording (TIMER)
1
Switch on the TV set. If required, select the programme number for the DVD
recorder (channel 3 or 4).
2
Press TIMER on the remote control.
The programming mode selected last is marked.
3
Select “Timer List” using w or v and confirm with u.
4
Select the programmed recording (TIMER) you want to check, change or delete
with w or v.
Timer
Timer List
Date Ch. Start
01/22 01 04:25PM
--/-- ----- --:--
End
06:05PM
--:--
Rec
Mode
M2
---
Tip
Delete programmed recording
1 Press the CLEAR button.
2 Confirm with ENTER/OK. “Timer Cleared” will briefly appear on the TV
screen.
“-- ---” appears rather than the displayed values
Total record time: 01:40
To change
Press &gt;
To exit
Press TIMER
3 To end, press TIMER.
5
Press u.
Select the input field with t or u.
If required, change the information with v, w or the number buttons 0..9.
6
Confirm with ENTER/OK.
7
To end, press TIMER.
8
Switch off with B/I.
Programming a recording (TIMER)
56
Problem solving for programmed
recordings
PROBLEM
SOLUTION
The DVD recorder is not responding
✓ While a programmed recording is being made, you cannot operate your DVD
recorder manually. If you want to cancel the programmed recording, press B/I.
“Switch off, timer recording” flashes on the
TV screen.
✓ The DVD recorder was switched on several minutes before the start of a programmed recording. Switch off the DVD recorder using B/I. A programmed
recording (timer) will only function if the DVD recorder is switched off (B/I button).
Error message: “Insert recordable disc”
✓ Either a disc has not been inserted or the disc cannot be used for recording. Insert
a disc on which recordings can be made. Switch off the DVD recorder using B/I.
The error message “Disc locked” appears
briefly on the screen.
✓ A write-protected disc has been inserted. Undo the write protection (see “Preventing accidental erasing of discs” in “Manual recording”) or insert a different disc.
Error message:
“Memory full”
✓ If this error message appears after pressing TIMER, then all TIMER blocks are
already programmed. No more recordings can be programmed. Press the u button.
If you want to clear or check a programmed recording (TIMER block), select it with
v or w.
The “Data error” message appears on the
screen.
✓ The data for the recording could not be transferred. Please check date, start time
and end time of the programmed recording.
The “Collision” message appears on the
screen.
✓ Two programmed recordings overlap.
✓ If you ignore this error message the show with the earlier start time will be
recorded first. The start of the second show will not be recorded.
✓ Change the setting for either of the two recordings.
✓ Clear either of the two recordings
57
Programming a recording (TIMER)
English
11. User preferences
In this section you will learn how to set your user preferences on the DVD recorder.
The symbols have the following meanings:
Picture settings
Sound settings
Language settings
Additional settings
Disc settings
Recording settings
Installation
1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
2
Press SYSTEM-MENU on the remote control. The menu bar appears.
3
Select “
4
Select the appropriate function with w or v and confirm with u.
5
Select the appropriate line using w or v and confirm with u.
6
Select the appropriate function using w or v or the setting with t or u.
7
Confirm the new setting by pressing ENTER/OK.
8
To close the menu item, press t.
” using t or u and confirm with w.
Picture settings
You can choose the following features in this menu:
“TV Shape”
n
Picutre
TV Shape
16:9
Black level shift
Off
Video shift
EXT1 video attenuation
Optimize video output Interlaced
The picture signal from your DVD Recorder can be set to match your TV screen.
“4:3 letterbox”: for a “wide-screen” picture with black bars at the top and bottom
“4:3 panscan”: for a full-height picture with the sides trimmed.
“16:9” : for a wide-screen TV set (screen edge ratio 16:9)
“Black level shift”
Adapts the colour dynamics for NTSC playback
“Video shift”
Use this feature to adjust the position of the picture on your TV left or right using t, u
to suit your TV set.
“EXT1 video attenuation”
Adjusts the brightness level for recording when connected with YPbPr.
“Optimize video output”
This allows you to switch the Component Video signal between “Interlaced” and “Progressive Scan”.
Warning: If your TV has separate connections for “Interlaced” and “Progressive
Scan” or it does not switch automatically between the two, it is possible that no picture will appear on the TV after it is switched from one to the other.
User preferences
58
Problem
✘ No picture appears on the TV after switching
Check the display of your DVD recorder.
“PRO”: “Progressive Scan” is on
No display: “Interlaced” is on. Switch your TV to the corresponding input jack
or select the corresponding connection. You can also switch the Component
video output signal as follows:
1 Disconnect the recorder’s power cord.
2 Hold down t on the DVD Recorder while reconnecting the power cord.
“PRO” (progressive scan) appears on the display.
3 If you want to switch back, repeat steps 1 and 2. “PRO” disappears from the display. The DVD Recorder is switched to “Interlaced.”
Sound settings
Depending on which audio outputs are used, you can select the settings in this menu.
If you only use the analogue audio output (AUDIO L, R), select the settings “Off” in
the “Digital output” menu.
“Digital output”
n
Sound
Digital output
Analog output
Night mode
All
Stereo
Off
For devices connected to the DIGITAL AUDIO OUT jack, you can select from the
following settings.
“All”:
Unalterned signals of Dolby Digital and DTS are fed to the digital output. MPEG-2 multi-channel signals are converted to PCM (Pulse Code
Modulation).
For receivers/amplifiers with digital multi-channel sound decoders.
“PCM only”: Dolby Digital and MPEG-2 multi-channel signals are converted to PCM
(Pulse Code Modulation).
For receivers/amplifiers without digital multi-channel sound
decoders.
“Off”:
Digital output switched off.
For devices with analogue audio input.
“Analog output”
For devices connected to the analogue audio output (AUDIO L, R), you can select
from the following settings.
“Stereo”:
For devices without DolbySurround, use this setting if the DVD
recorder is only connected to a stereo TV set.
“Surround”:
Dolby Digital and MPEG-2 multi-channel are mixed down to a Dolby
surround-compatible two-channel output signal. For devices with
Dolby Surround Pro Logic decoder.
“Night mode”
Night mode optimises the sound for playback at low volume.You are therefore less
likely to disturb your neighbours. This only works for Dolby Digital audio on DVD
video discs.
59
User preferences
English
Language settings
You can choose the following settings in this menu:
“Playback audio”
n
Language
Playback audio
Recording audio
Subtitle
Menu
English
Stereo
English
English
Playback audio language
“Recording audio”
A choice between Stereo and SAP
“Subtitle”
Subtitle language
“Menu”
Screen menu language
Additional settings
You can select the following functions in this menu:
“Status box”
n
Features
Status box
Standby
Display
On
Normal
Bright
Along with the on screen menu, the OSD (On Screen Display) also displays information
on the current operating status (counter, playback, recording, TV channel, etc.) on the
TV screen.
You can switch off the information about the operating status so that the on screen display (OSD) is not recorded during copying.
“On”:
The OSD information appears in every selected mode for a few seconds and disappears again.
“Off ”:
The OSD information is switched off. It is no longer displayed on the
screen.
“Standby”
To save power, you can switch off the clock display on the DVD recorder. Programmed
(TIMER) recordings will still take place.
In addition, you can present the most important features of the DVD recorder in scrolling text in the display (demo).
“Low power”: If the DVD-Recorder is switched off (button B/I), the clock display is
also switched off.
“Normal”:
If the DVD-Recorder is switched off (button B/I), the clock display is
visible.
“Demo mode”: If the DVD recorder is switched off with the B/I button, a list of the
most important features is shown in the display.
“Display”
You can change the brightness of the display on the DVD recorder. This setting only
affects the DVD recorder when it is switched on.
“Bright”:
The display appear with normal brightness.
“Dimmed”:
The display appears less bright.
“Off ”:
The display is switched off.
User preferences
60
Disc feature menu
In this menu you can make the changes that relate to the disc:
“Access control”
n
Disc features
Access cntrol
Auto resume
Enter code...
On
Please read the next chapter on “Access control (child lock)”.
“Auto resume”
If playback of a pre-recorded DVD video disc or video CD is interrupted (button
STOP
or F Open/Close) when the disc is reloaded (disc is started) playback
starts at the precise location where it stopped. This applies not only to the current disc
but to the last 20 discs played.
This feature can be switched off if not required.
“PBC”
This line appears only if a VCD is loaded.
This function lets you activate or deactivate the PBC menu (Playback Control) for video
CDs.
See “Playing a (Super) Video CD”.
“Finalise disc”
This feature allows you to finalise DVD+R discs. If the disc has already been finalised
this line will appear darker.
“Adapt disc format”
If a DVD+RW has been recorded in a computer drive or in another DVD recorder the
index screen may not be displayed correctly.
This feature allows you to change the format of the disc.
It is therefore only visible if the disc format is different.
61
User preferences
English
12. Access control (Child Lock)
Child lock (DVD and VCD)
This feature enables discs to be locked for children.
When Child Lock is on, a 4-digit code (PIN) needs to be entered before a disc can be
played.
You can also decide whether the inserted disc should always be played or should be
played only once, despite the child lock
•) “Play always”:
This disc is stored in a memory with space for 50 child-safe discs. If more than 50 discs
are stored, the last disc in the list is removed and the new disc is added. The screen
shows “Child safe” at the start of playback.
•) “Play once”:
This disc is only authorised for single playback. If the recorder is switched off, the PIN
code must be re-entered.
Activating/deactivating child lock
1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
2
Switch on the DVD recorder using B/I.
3
Press SYSTEM-MENU. The menu bar appears.
4
Select the “
5
Select “
6
Confirm “Access control” using u.
7
Enter a 4-digit code of your choice. If the code is new, you may have to enter the
code a second time as confirmation.
8
Select “Child lock” using v or w and confirm with u.
9
Select the “&Ccedil;” icon using w or v.
0
Confirm with ENTER/OK.
A
Quit the feature using t and SYSTEM-MENU.
” icon using t or u.
(Disc features)” using w or v and confirm with u.
Unauthorised discs can only be played by entering the four-digit PIN code.
To deactivate the child lock, select the “&Eacute;” icon in 9.
Authorising a disc
1
Insert a disc. The access control box will appear after a short delay.
2
Using v or w select “Play once” or “Play always”.
3
Enter your PIN code using the number buttons 0..9.
Double-sided DVDs may have a different ID for each side. For these discs, each side
must be authorised. Multi-volume video CDs may have a different ID for each volume.
For these CDs, each volume must be authorised.
Access control (Child Lock)
62
Locking unlocked discs
To lock a disc that was formerly authorised follow the instructions below.
1
Insert a disc. Playback starts automatically. If the playback does not start automatically, press PLAY .
2
Press the STOP
button while the “
“
”. The disc is now locked.
” icon is visible. The icon changes to
Parental level control (DVD video
only)
Films on pre-recorded DVD discs may contain scenes not suitable for children. Therefore, some discs may contain “Parental Control” rating information that applies to the
entire disc or to certain scenes on the disc.
The appropriate scenes have filter values that reach from 1-8. If such a scene is
detected during playback, the filter value set on the DVD recorder is compared to the
scene. If the filter value is higher than the setting, an alternative scene will be played (if
available).
Most DVDs apply the rating to an entire DVD. Therefore, if certain scenes exceed the
rating you select, the entire disc will be blocked from viewing.
Activating/deactivating parental level control
n
1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
2
Switch on the DVD recorder using B/I.
3
Press SYSTEM-MENU. The menu bar appears.
4
Select the “
5
Select “
6
Confirm “Access control” using u.
7
Enter a 4-digit code of your choice. If the code is new, you may have to enter the
code a second time as confirmation.
8
Select the “Parental level” using v or w and confirm with u. A bar appears to
select the parental level.
9
Select the appropriate rating using w, v or the number buttons 0..9.
” icon using t or u.
(Disc features)” using w or v and confirm with u.
Disc features
Access control
Auto resume
Enter code . . .
On
Tip
What do the ratings mean?
Rating 0 (displayed as “--”) parental control not active.
Rating 1 (suitable for children)
Rating 8 (only suitable for adults)
What happens if a DVD scene contains a higher level than the rating set?
If the recorder does not find a suitable alternative, playback will stop and you must
enter the four-digit code.
0
63
Confirm with ENTER/OK. Quit using t and SYSTEM-MENU.
Access control (Child Lock)
English
Changing the country
The set filter values depend on the respective country. It is therefore necessary to
enter the country to which these filter values apply.
n
1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
2
Switch on the DVD recorder using B/I.
3
Press SYSTEM-MENU. The menu bar appears
4
Select the “
” icon using t or u.
5
Select line “
(Disc features)” using w or v and confirm with u.
6
Confirm the line “Access control” using u.
7
Enter your four-digit code. If the code is new, you may have to enter the code a
second time as confirmation.
8
Select “Change country” using w or v and confirm with u.
9
Select the corresponding country using v or w and confirm with ENTER/OK.
0
To end, press t and then SYSTEM-MENU.
Disc features
Access control
Auto resume
Enter code . . .
On
Changing the PIN code
n
1
Switch on the TV set. If required, select the programme number for the DVD
recorder.
2
Switch on the DVD recorder using B/I.
3
Press SYSTEM-MENU. The menu bar appears
4
Select the “
5
Select “
6
Confirm “Access control” using u.
7
Enter your four-digit PIN code. If the code is new, you may have to enter the code
a second time as confirmation.
8
Select “Change code” using v or w and confirm with u.
9
Enter the new code using the number buttons 0..9. Enter the same code again as
confirmation.
0
Quit using t and SYSTEM-MENU.
” icon using t or u.
(Disc features)” using w or v and confirm with u.
Disc features
Access control
Auto resume
Enter code . . .
On
Tip
I have forgotten my code
Press STOP
four times (step 7), then press ENTER/OK. Access control is
now switched off. You can now enter a new code as described above.
Access control (Child Lock)
64
13. Before you call an engineer
If you have any problems using this DVD recorder, the reason may be one of the following.You can also call the customer service centre in your country.
If the problem is not listed below, or if the instructions fail to help, turn off the power
to the unit, disconnect the power cable, and contact the nearest authorized YAMAHA
dealer or service center.
PROBLEM
SOLUTION
Your recorder does not respond to any
✓ Recorder in initial installation mode: Switch on the TV, switch over to the DVD
button being pressed and the display shows
recorder jack. Now the menu for language selection should appear. Please read
“IS TV ON?”:
paragraph “Initial Installation” in the chapter “Installing your DVD Recorder”.
The device does not react when you press a ✓ “Dealer-Mode” is switched on: All buttons on the front of the set are locked.
Switch off the function:
button, although the remote control
1 Pull out the mains plug from the wall outlet.
works:
2 Press and hold down A and F (Open/Close) and put back the mains plug into
the wall outlet.
3 As soon as the time or “--:--” appears in the display (ca. 6 - 10 seconds), release
A and F (Open/Close).
Your DVD recorder does not respond to
any button being pressed:
✓ There is no power supply: check the power supply
✓ A programmed recording (Timer) is currently being made: If desired, cancel the
programmed recording (Timer) with B/I.
✓ There is a technical problem: disconnect from the mains power supply for 30 seconds, then connect again.
If this doesn’t help, you can reset your DVD recorder to the default factory settings.
Resetting the machine to the default
factory settings:
✓ Important:
All the information stored (TV channels, time and date, TIMER) will be lost.
1 Disconnect from the mains power supply.
2 Press and hold down the B/I button on the device and reconnect to the mains
power supply.
3 Release the B/I button when “IS TV ON?” appears on the display. All the information stored (TV channels, time and date, TIMER) will be lost.
Please read paragraph “Initial Installation” in the chapter “Installing your DVD
Recorder”.
Remote control does not work:
✓ Remote control not pointed toward the DVD recorder: Point the remote control
at the machine.
See if the “o(((” appears on the display briefly each time you press a remote control
button. If it does, the Recorder is receiving information from the remote correctly.
✓ There is a technical problem: Take out the batteries, wait for 10 seconds and put
them in again.
✓ Batteries are flat: Change the batteries.
No playback on DVD recorder:
✓ There is no recording on the disc: Change disc.
✓ You inserted the wrong disc type:Your recorder can play back the following disc
types: DVD Video, (Super) Video CD, DVD+R(W), Audio CD, MP3-CD’s
✓ You inserted the disc the wrong way: Insert the disc with the label facing upwards
✓ Disc is dirty: Clean the disc
✓ Wrong region code: The region code of the DVD and the DVD recorder must
match.
✓ Parental control is on: Read chapter “Access control (child lock)”
✓ You have selected the wrong programme number for the DVD recorder on the TV:
on the TV, select the correct programme number for the DVD recorder.
✓ The cable connecting the TV set and the DVD recorder has come loose: check the
cable.
65
Before you call an engineer
English
PROBLEM
SOLUTION
I cannot playback (Super) Video CDs
✓ It is possible that this (Super) Video CD contains a menu and the “PBC” is switched
off.You can see this in status field “PBC OFF”. To activate this function, proceed as
follows:
1 Press SYSTEM-MENU while the (Super) Video-CD is inserted.
2
3
4
5
Select “
” using t or u.
Select line “Features” using w or v and confirm with u.
Select “On” in line “PBC” using w or v.
Confirm with ENTER/OK and end with SYSTEM-MENU.
Poor playback on DVD recorder: (distorted ✓ Your TV set is not properly adjusted.
✓ Disc is dirty: Clean the disc
picture/distorted sound)
✓ Sometimes the picture may be temporarily distorted. This is not a defect of your
DVD recorder.
No recording possible:
✓ The TV channel you want to record is not stored or you selected the wrong programme number:
Check TV channels stored.
✓ Disc write-protected (recording protected): Remove write-protection or change
the disc. For more information, please see “Preventing accidental erasing of discs”
in chapter “Manual Recording”.
✓ An already finalised DVD+R has been inserted: Change disc.
Programmed recording does not work:
✓ You have programmed the wrong time or date: Check time/date.
✓ You have not set the TIMER properly: Check the programmed recordings (TIMER
block).
✓ Locked disc inserted: Remove disc lock.
✓ An already finalised DVD+R has been inserted: Change disc.
The wrong TV channel was decoded
(entered) after you programmed a
recording using VCR Plus+ System.
There is picture or sound interference on
TV reception:
1
2
3
4
Enter the VCR Plus+ programming number of the TV channel you want.
Confirm with ENTER/OK.
Check the programme number/channel name in the “Prog.” input field.
If this does not correspond to the desired TV channel, select the input field and
change the programme number/channel name.
5 Confirm with ENTER/OK.
✓ Have your aerial checked.
✓ You will find information on how to change the TV system in “Manual TV channel
search” in “Installing your DVD recorder”.
Distorted sound coming from a connected ✓ The DVD recorder is connected to the “Phono-input” of your amplifier: This jack is
provided only for record players without a preamplifier. Select a different audio
hi-fi amplifier
input.
The picture is distorted or black-and-white ✓ The TV system of the disc does not match that of your TV set (PAL/NTSC).
✓ The recording can be made in colour only when the TV channels or the connected
during playback
additional device send a colour signal. Black-and-white signals containing no color
information (colour subcarriers) cannot be recorded.
No sound signal at the digital output
Before you call an engineer
✓ Check whether the sound settings match the selected inputs and connected additional devices.
66
PROBLEM
SOLUTION
A DVD+RW disc cannot be played on
certain DVD players
✓ If a recording is too short, it is possible that a DVD player cannot detect it: Please
observe the following “Minimum recording times”:
Recording mode “M1”: 5 minutes, “M2”: 10 minutes, “M2x”: 13 minutes, “M3”: 15
minutes, “M4”: 20 minutes, “M6”: 30 minutes
✓ Some DVD players cannot play back DVD+RW recordings.You can solve this problem by using a special function:
1 Open the disc tray with F (Open/Close). Insert the disc but do not close the
tray.
2 Hold down the number button 2 on the remote control until the tray closes.
The disc is modified.
3 If this fails to produce the desired result, repeat the procedure using the number
button 3 on the remote control.
4 You can restore the disc to its original condition by pressing 1.
Warning!
There is a risk that you can no longer play the disc on other DVD players after this
procedure.
Therefore, apply this function with particular care.
Other disc errors
✓ If it is impossible to play back a disc, you can try and repair it for new recordings
using the following function. This will only prepare the disc for erasing. It will not be
erased, however, until the recording has been completed.
1 Clean the disc
2 Open the disc tray with F (Open/Close). Insert the disc but do not close the
tray.
3 Hold down CLEAR on the remote control until the tray closes. The disc is prepared for erasing.
4 Start recording as with an empty disc.
67
Before you call an engineer
English
Appendix
Using DRX-2 remote control for
your TV set
Your DVD recorder remote control can transmit several commands to TV sets of different brands.
The following keys will operate the TV set:
- VOL +
increase TV volume
- VOL decrease TV volume
- MUTE
mute TV
Some other keys normally operate the DVD recorder, but will operate the TV set when
you keep TV SHIFT pressed:
- CH +
next TV programme number
- CH previous TV programme number
- 0..9
choose TV channel
- B/I
switch TV set to standby
If your TV set does not respond to the remote control, you can re-programme your
remote control. Below you will find a list of all available remote control codes for various TV brands. The following procedure re-programmes your remote control:
Appendix
1
Look up the set-up code for your TV set in the code list in the following page.
2
Press and hold the t and u simultaneously for at least 3 seconds.
3
Release both keys.
4
Enter, within 30 seconds, the correct four-digit code with the digit keys 0..9.
5
If the selected code does not work with your TV set, or if the brand of your TV
set is not in the list, try out the codes one after the other.
68
Remote control set-up
codes for television
Abex. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1066
Admiral . . . . . . . . . . . . . . . . . 1013, 1028, 1075
Aiko . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1012
Akai . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1005
Alaron . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1022
American Action . . . . . . . . . . . . . . . . . . . . 1023
Anam . . . . . . . . . . . . . . . . . . . . . . . . 1023, 1079
AOC . . . . . . . . . . . . . . . . . . . 1003, 1005, 1048
Audiovox . . . . . . . . . . . 1012, 1023, 1027, 1029
Baysonic . . . . . . . . . . . . . . . . . . . . . . . . . . . 1023
Belcor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1003
Bell &amp; Howell. . . . . . . . . . . . . . . . . . 1016, 1075
Bradford. . . . . . . . . . . . . . . . . . . . . . . . . . . 1023
Brocksonic . . . . . . . . . . . . . . . . . . . . 1024, 1028
Brockwood . . . . . . . . . . . . . . . . . . . . . . . . 1003
Candle . . . . . . . . . . . . . . . . . . . . . . . 1005, 1009
Carnivale . . . . . . . . . . . . . . . . . . . . . . . . . . 1005
Carver . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000
Celebrity . . . . . . . . . . . . . . . . . . . . . . . . . . 1001
Cineral . . . . . . . . . . . . . . . . . . . . . . . 1012, 1027
Citizen . . . . . . . .1005, 1009, 1010, 1012, 1044,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1046, 1064
Concerto . . . . . . . . . . . . . . . . . . . . . . . . . . 1009
Contec . . . . . . . . . . . . . . . . . . 1023, 1063, 1065
Craig . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1023
Crosley. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000
Crown . . . . . . . . . . . . . . . . . . . . . . . 1023, 1064
Curtis Mathes . . . . . . 1000, 1005, 1006, 1007,
. . . . . . . . . . . . . .1009, 1010, 1013, 1014, 1016,
. . . . . . . . . 1019, 1027, 1034, 1036, 1046, 1064
CXC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1023
Daewoo . . . . . . . . . . . .1003, 1012, 1027, 1029,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1030, 1064
Daytron . . . . . . . . . . . . . . . . . . . . . . 1003, 1064
Denon . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1014
Dumont . . . . . . . . . . . . . . . . . . . . . . 1002, 1003
Electroband . . . . . . . . . . . . . . . . . . . . . . . . 1001
Electrohome . . . . . . . . . . . . . . . . . . . . . . . 1079
Emerson. . . . . . 1003, 1016, 1021, 1022, 1023,
. . . . . . . . .1024, 1026, 1028, 1029, 1030, 1044,
. . . . . . . . . 1045, 1063, 1064, 1067, 1068, 1069
Envision . . . . . . . . . . . . . . . . . . . . . . . . . . . 1005
Fisher . . . . . . . . . . . . . . . . . . . 1016, 1055, 1056
Fujitsu. . . . . . . . . . . . . . . . . . . . . . . . 1022, 1032
Funai. . . . . . . . . . . . . . . . . . . . 1020, 1022, 1023
Futuretech . . . . . . . . . . . . . . . . . . . . . . . . . 1023
GE . . . . . . . . . . .1004, 1006, 1007, 1013, 1021,
. . . . . . . . . . . . . .1026, 1027, 1034, 1036, 1047,
. . . . . . . . . . . . . . . . . . . 1060, 1061, 1062, 1079
Gibralter . . . . . . . . . . . 1002, 1003, 1005, 1063
Goldstar. . . . . . . . . . . .1003, 1005, 1009, 1021,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1064, 1066
Gradiente. . . . . . . . . . . . . . . . . . . . . 1008, 1009
Grundy. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1064
Grunpy . . . . . . . . . . . . . . . . . . . . . . . 1022, 1023
Hallmark . . . . . . . . . . . . . . . . . . . . . . . . . . 1021
Hardvard . . . . . . . . . . . . . . . . . . . . . . . . . . 1023
Harley Davison . . . . . . . . . . . . . . . . . . . . . 1022
Harman Kardon. . . . . . . . . . . . . . . . . . . . . 1000
69
Hitachi . . . . . . . . . . . . . 1009, 1014, 1063, 1065
Infinity . . . . . . . . . . . . . . . . . . . . . . . 1000, 1077
Inteq . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1002
JBL . . . . . . . . . . . . . . . . . . . . . . . . . . 1000, 1077
JCB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1001
JVC . . . . . . . . . . . . . . . 1008, 1060, 1063, 1065
JVC RMC383. . . . . . . . . . . . . . . . . . . . . . . 1043
KEC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1023
Kenwood . . . . . . . . . . . . . . . . . . . . . 1003, 1005
Kloss . . . . . . . . . . . . . . . . . . . 1057, 1058, 1059
KTV . . . . . . . . . . . . . . . 1005, 1023, 1044, 1064
LG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1009
Loewe . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1077
Luxman . . . . . . . . . . . . . . . . . . . . . . . . . . . 1009
LXI . . . . . . 1000, 1006, 1016, 1017, 1021, 1077
Magnavox. . . . . . . . . . . 1000, 1005, 1022, 1049,
. . . . . . . . . . . . . . 1050, 1057, 1058, 1059, 1077
Marantz . . . . . . . . . . . . . . . . . 1000, 1005, 1077
Matsushita . . . . . . . . . . . . . . . . . . . . . . . . . 1025
Megatron . . . . . . . . . . . . . . . . . . . . . 1014, 1021
Memorex. . . . . . . . . . . 1009, 1015, 1016, 1021,
. . . . . . . . . . . . . . . . . . . . . . . . 1025, 1028, 1075
MGA . . . . . . . . . 1003, 1005, 1015, 1021, 1056
Midland . . 1002, 1006, 1007, 1060, 1064, 1066
Minutz . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1004
Mitsubishi . . . . . 1003, 1013, 1015, 1021, 1056
Motorola . . . . . . . . . . . . . . . . . . . . . 1013, 1079
MTC . . . . . . . . . 1003, 1005, 1009, 1010, 1046
Multitech . . . . . . . . . . . . . . . . . . . . . 1019, 1023
NAD . . . . . . . . . . . . . . . . . . . . . . . . 1017, 1021
NEC. . . . . . . . . . . . . . . 1003, 1005, 1009, 1079
Nikko. . . . . . . . . . . . . . . . . . . 1005, 1012, 1021
NTC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1012
Onwa. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1023
Optimus. . . . . . . . . . . . . . . . . 1016, 1019, 1025
Optonica . . . . . . . . . . . . . . . . . . . . . 1013, 1018
Orion. . . . . . . . . . . . . . . . . . . 1022, 1024, 1028
Panasonic. . . . . . 1007, 1025, 1060, 1077, 1079
Penney . . . . . . . 1003, 1004, 1005, 1006, 1007,
. . . . . . . . . . . . . . 1009, 1010, 1017, 1021, 1036,
. . . . . . . . . 1046, 1060, 1063, 1064, 1066, 1076
Philco . . . . 1000, 1003, 1005, 1014, 1028, 1049,
. . . . . . . . . 1057, 1058, 1059, 1059, 1077, 1079
Philips . . . . . . . . . . . . . 1000, 1049, 1050, 1057,
. . . . . . . . . . . . . . 1058, 1063, 1073, 1077, 1079
Pilot . . . . . . . . . . . . . . . . . . . . 1003, 1005, 1064
Pioneer . . . . . . . . . . . . . . . . . . . . . . 1019, 1031
Price Club . . . . . . . . . . . . . . . . . . . . . . . . . 1046
Portland. . . . . . . . . . . . . . . . . 1003, 1012, 1064
Prism . . . . . . . . . . . . . . . . . . . . . . . . 1007, 1060
Proscan . . . . . . . . . . . . . . . . . . . . . . . . . . . 1006
Proton . . . . . . . . . . . . . . . . . . . . . . . 1021, 1063
Pulsar . . . . . . . . . . . . . . . . . . . . . . . . 1002, 1003
Quasar. . . . . . . . 1007, 1018, 1025, 1060, 1079
Radio Shack . . . . . . . . . 1003, 1005, 1006, 1009,
. . . . . . . . . . . . . . 1016, 1018, 1021, 1023, 1063,
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1064, 1066
RCA. . . . . . . . . . 1003, 1006, 1007, 1011, 1013,
. . . . . . . . . . . . . . 1033, 1034, 1035, 1036, 1037,
. . . . . . . . . 1038, 1048, 1052, 1071, 1072, 1079
Realistic . . . . . . . . . . . . 1003, 1005, 1009, 1016,
. . . . . . . . . . . . . . 1018, 1021, 1023, 1063, 1064
Runco . . . . . . . . . . . . . . . . . . . . . . . .1002, 1005
Sampo . . . . . . . . . . . . . . . . . . .1005, 1064, 1066
Samsung . . . . . . 1003, 1005, 1009, 1010, 1021,
. . . . . . . . . . . . . 1046, 1063, 1064, 1066, 1078
Samsunx . . . . . . . . . . . . . . . . . . . . . . . . . . .1064
Sansei . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1027
Sansui . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1028
Sanyo . . . . . . . . . . . . . . . . . . . . . . . . .1016, 1055
Scimitsu . . . . . . . . . . . . . . . . . . . . . . . . . . . .1003
Scotch . . . . . . . . . . . . . . . . . . . . . . . .1021, 1063
Scott . . . . . . . . . 1003, 1021, 1022, 1023, 1024
Sears . . . . 1000, 1006, 1009, 1016, 1017, 1020,
. . . . . . . . 1021, 1022, 1053, 1055, 1056, 1065
Semivox. . . . . . . . . . . . . . . . . . . . . . . . . . . .1023
Semp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1017
Sharp . . . . 1013, 1018, 1031, 1051, 1063, 1064
Shogun. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1003
Signature . . . . . . . . . . . . . . . . . . . . . . . . . . .1075
Sony. . . . . . . . . . . . . . . . . . . . . . . . . .1001, 1042
Sounddesign . . . . . . . . . . . . . .1021, 1022, 1023
Squareview . . . . . . . . . . . . . . . . . . . . . . . . .1020
SSS. . . . . . . . . . . . . . . . . . . . . . . . . . .1003, 1023
Starlite. . . . . . . . . . . . . . . . . . . . . . . . . . . . .1023
Supreme . . . . . . . . . . . . . . . . . . . . . . . . . . .1001
Sylvania . . . . . . . 1000, 1005, 1049, 1050, 1054,
. . . . . . . . . . . . . . . . . . . . . . . .1058, 1059, 1077
Symphonic. . . . . . . . . . . . . . . . . . . . . . . . . .1020
Tandy. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1013
Tatung . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1079
Technics. . . . . . . . . . . . .1007, 1025, 1060, 1063
Technol Ace. . . . . . . . . . . . . . . . . . . . . . . . .1022
Techwood . . . . . . . . . . . . . . . .1007, 1009, 1060
Teknika . . . . . . . 1000, 1003, 1009, 1010, 1012,
. . . . . . . . 1015, 1022, 1023, 1046, 1064, 1065
Telecaption . . . . . . . . . . . . . . . . . . . . . . . . .1074
Telefunken . . . . . . . . . . . . . . . . . . . . . . . . . .1009
Thomson. . . . . . . . . . . . . . . . . . . . . . . . . . .1039
TMK . . . . . . . . . . . . . . . . . . . . . . . . .1009, 1021
Toshiba . . . . . . . 1010, 1016, 1017, 1040, 1041,
. . . . . . . . . . . . . . . . . . .1046, 1054, 1070, 1074
Totevision . . . . . . . . . . . . . . . . . . . . . . . . . .1064
Vector Research . . . . . . . . . . . . . . . . . . . . .1005
Victor . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1008
Vidikron . . . . . . . . . . . . . . . . . . . . . . . . . . .1000
Vidtech . . . . . . . . . . . . . . . . . . . . . . .1003, 1021
Wards . . . . . . . 1000, 1003, 1004, 1005, 1009,
. . . . . . . . 1018, 1021, 1022, 1049, 1050, 1054,
. . . . . . . . . . . . . . . . . . .1057, 1058, 1075, 1077
White_Westinhouse. . . . . . . .1029, 1028, 1030
Yamaha . . . . . . . . . . . . . . . . . . . . . . .1003, 1005
Zenith . . . . . . . . . . . . . . . . . . .1002, 1012, 1028
Appendix
English
Specifications
Disc Formats Supported
Disc type
DVD+RW
DVD+R
DVD-RW (Video mode)
DVD-R
DVD-Video
Super Video CD
Video CD
Audio CD
CD-R
CD-RW
Playback
•
•
•
•
•
•
•
•
•
•
Audio format
Recording
•
•
–
–
–
–
–
–
–
–
Recordable Disc Formats
Medium
Diameter
Capacity (single side)
Recording time
DVD+RW: Phase-Change ReWritable
DVD+R: dye-based
12 cm
4.7 Gbyte
9.72 Mbit/s
M1
60’
5.07 Mbit/s
M2
120’
4.06 Mbit/s
M2x
150’
3.38 Mbit/s
M3
180’
2.54 Mbit/s
M4
240’
1.69 Mbit/s
M6
360’
TV Standard
PAL
NTSC
Scan Frequency
Number of lines
Playback
Recording
Internal tuner
50Hz
625
•
•
•
60Hz
525
•
•
–
Video RESOLUTION
50Hz
60Hz
DVD-Video/DVD+RW/DVD+R (M1/M2/M2x)
-Horiz. Resolution
720 pixels1
-Vertical Resolution
576 lines
DVD+RW/DVD+R (M3/M4/M6)
-Horiz. Resolution
360 pixels2
-Vertical Resolution
576 lines
VCD
-Horiz. Resolution
352 pixels
-Vertical Resolution
288 lines
720 pixels1
480 lines
360 pixels2
480 lines
352 pixels
288 lines
1 equivalent to 500 lines on your TV
2 equivalent to 250 lines on your TV
Compressed Digital
-Dolby Digital
-DTS
-MPEG1
-PCM
Playback
Multi-channel
(AC-3)
Multi-channel
2-channel
SPdif
2-channel
16, 20, 24 bit
fs 48 kHz
Component Output
Appendix
10-bit
9-bit
Components
1 Vpp into 75 Ohm
Y: 1 Vpp into 75 Ohm
C: 0.286 Vpp into 75 Ohm
Y: 1 Vpp into 75 Ohm
Pb: 0.7 Vpp into 75 Ohm
Pr: 0.7 Vpp into 75 Ohm
2-channel
16-bit, fs 48 kHz
Audio Performance
DA Converter
AD Converter
DVD
24-bit
16-bit
fs 96 kHz
fs 48 kHz
fs 44.1 kHz
fs 44.1 kHz
Video CD
Audio CD
4 Hz - 44 kHz
4 Hz - 22 kHz
4 Hz - 20 kHz
4 Hz - 20 kHz
Front Connections
i.LINK DV
S-video Input
Video Input
Audio Left/Right Input
IEEE 1394 4-pin
Hosiden 4-pin
Cinch (yellow)
Cinch (white/red)
Rear Connections
Component Video In
Component Video Out
S-video In
S-video Out
Video In
Video Out
Audio L/R In
Audio L/R Out
Digital Audio Out
Cinch (green/blue/red)
Cinch (green/blue/red)
Hosiden 4-pin
Hosiden 4-pin
Cinch (yellow)
Cinch (yellow)
Cinch (white/red)
Cinch (white/red)
1 coaxial, 1 optical
IEC958 for CDDA / LPCM
IEC1937 for MPEG2, Dolby Digital
Coaxial 75 ohms
Coaxial 75 ohms
Standard (IEC type)
RF Antenna In
RF TV Out
Power
Power Supply
Power Inlet
Power consumption
120 V, 60 Hz
Operation
Low-power Standby
Video Performance
DA Converter
AD Converter
Signal handling
Video Output
S-video Output
Recording
2-channel
16-bit, fs 48 kHz
–
–
27 W
3W
Cabinet
Dimensions (w x h x d)
Net Weight
435 x 82 x 347 mm
4.0 kg
Operating environment
Operating position
Ambient temperature
Humidity
maximum 10 degree inclination in all directions
15 C - 35 C
25% - 75%
70
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A.
YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA
YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.R. OF GERMANY
YAMAHA ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE
YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND
YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 V&Auml;STRA FR&Ouml;LUNDA, SWEDEN
YAMAHA MUSIC AUSTRALIA PTY, LTD. 17-33 MARKET ST., SOUTH MELBOURNE, 3205 VIC., AUSTRALIA
3139 246 13152
IP
Printed in Hungary
">

Hello! I am an AI chatbot specifically trained to assist you with the Yamaha DRX-2 Owner's manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!