GE Profile PT7050SFSS Specs

Junction box
location
9-1/2" MAX.
PT7050SF
GEConduit
Profile™ Series 30
Cutout depth
23-1/2"
22"MIN
to
bottom of
box
box
in.Junction
Built-In
Single
Convection
Cutout width
locationjunction
40"
Dimensions and Installation Information (in inches)
22" to
Most 30” Wall Cabinets can be used with
bottom of
junction box
this
unit.
Conduit
40" D
Note: These ovens are not approved
for stackable installations. Cabinets
installed adjacent to wall ovens must
22" haveD an adhesion spec of at least a 194°F
temperature rating.
22"
F
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
28-1/2" MIN.
28-5/8" MAX.
Wall Oven
Cutout depth
23-1/2" MIN
F
Cutout width
28-1/2" MIN.
28-5/8" MAX.
A
B
C
A
B
C
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance
with installation instructions.
Installation Information: Before installing,
consult installation instructions packed with
product for ­current dimensional data.
9-1/2" MAX.
Conduit Junction box
40" location
E
Cutout height
27-1/4" MIN.
E
27-5/16" MAX.
D
Conduit
40"
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Recommended
cutout location 23" minimum
door opening
from floor
allowance
32-1/2"
Cutout w
28-1/2" M
28-5/8" M
22"
D
Recommended
cutout location
from floor
32-1/2"
22" to
bottom of
junction box
B
23" minimum
door opening
22"
allowance
30''
30''
PT7050
installations require at least 2"
2 x 4Side-by-side
or
JT5000
equivalent
runners
between
cutouts.
JT3000
level
with
bottom
of
cutout
2 x 4 or
Cabinet
JT1000
equivalent
runners
and flush
with
sides
of
cutout
KW Rating
A
–
Overlap
of
oven
at
top
of
cutout
level
with
bottom
of
cutout
Cabinet
30"
or solid
bottom
4.5 floor.
240V
and flush
with sides
of cutout
B –ofOverlap
of oven
over side of edges of cutout
A – Overlap
oven at top
of cutout
1"
or solid bottom
3.4
208V floor.
C –ofOverlap
oven
at bottom
of cutout 3/4"
B – Overlap
oven overofside
of edges
of cutout
Breaker Size
C – Overlap
1-1/4"
Ovenof oven at bottom of cutout
Oven
240V 20 Amps
D – Overall depth with handle
D – Overall depth with handle
27-3/16"
lbs.)
Overall depth without handle
208V 20 Amps
lbs.)
Overall depth without handle
23-1/2"
E – Overall height with trim
E – Overall height with trim
28-3/8"
F width
– Overall width
F – Overall
29-3/4"
PT7050
JT5000
JT3000
JT5000
JT1000
30"
1"
3/4"
1-1/4"
30'
CL
2 x 4 or
equivalent runners
2 x 4 or
level with bottom of cutout
equivalent runners
and flush with sides of cutout
level with bottom of cutout
Cabinet
and flush with sides of cutout or solid bottom floor.
CL
or solid bottom floor.
Suitable
Suitable
bracing
27-3/16"
bracing
200 lbs.) (must support 200 lbs.)
to support
to support (must support
23-1/2"
runners
runners
28-3/8"
29-3/4"
A – Overlap of oven at top of cutout
B – Overlap of oven over side of edge
C – Overlap of oven at bottom of cuto
Oven
D – Overall depth with handle
Overall depth without handle
E – Overall height with trim
F – Overall width
Listed by
Underwriters
Laboratories
For answers to your Monogram® or GE appliance
questions, visit our website at geappliances.com
or call GE Answer Center® service, 800.626.2000.
Specification Revised 3/14
220252
PT7050SF
GE Profile™ Series 30 in. Built-In Single Convection Wall Oven
Optional Undercounter Dimensions and Installation Information
Note: 36" ribbon cooktop are approved for use
over GE 30" single wall ovens and warming
drawers. 30" ribbon cooktops are approved
for use over 30" and GE 27" single wall ovens
and warming drawers. Refer to cooktop and
wall oven installation information packed with
products for current dimensional data.
Dimension and installation information are shown in inches.
Gas or electric cooktops may be installed over this
oven. See cooktop installation instructions for cutout size.
See label on top of oven for approved cooktop models.
Gas or electric connections
for gas cooktop must be
located in an adjacent
accessible location to the right
240V / 208V
Junction box
location
25
9-1/2"
Note: Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference
with the handle.
Installation information: Before installing,
consult installation instructions packed with
products for current dimensional data and for
alternate installation options.
28 1/2" MIN.
28 5/8" MAX.
27 1/4" MIN.
27 5/16" MAX.
Electric wall ovens are not approved for
installation with a plug and receptacle. They
must be hard wired in accordance with
installation instructions.
Allow 1-1/4"
top/bottom and
1" on sides for
overlap
22" MIN.
Above
support
platform
36"
Typical
countertop
height
24
4"
3/4" Support
platform required
Must Support 200 Lbs.
Listed by
Underwriters
Laboratories
For answers to your Monogram® or GE appliance
questions, visit our website at geappliances.com
or call GE Answer Center® service, 800.626.2000.
Specification Revised 3/14
220252
PT7050SF
GE Profile™ Series 30 in. Built-In Single Convection Wall Oven
Features and Benefits
•True European Convection with Direct Air - Bakes evenly as warm
air blows from the top in and around bakeware
•Ten-Pass Bake Element - Even baking is assured with heat that
covers more surface area
•Ten-Pass Dual Broil Element - Large and small dishes brown
evenly with two, full-coverage elements
•Self-Clean Heavy-Duty Roller Rack - Easily access items with a
rack that glides smoothly
•Progressive Halogen Oven Lighting - See what you’re baking with
lights that slowly illuminate the oven
•Self-Clean with Steam Clean Option - Clean your oven the way
you want
•Glass Touch Controls - Set temperatures quickly and clean with
little effort
•5.0 cu. ft. Oven Capacity - Cook more dishes at once
•Black Gloss Oven Interior - Enjoy a clean and sleek appearance
•Hidden Bake - Make cleanup easy by eliminating hard-toreach areas
• Model PT7050SFSS - Stainless steel
PT7050SFSS
Specification Revised 3/14
220252