GE JT5000SFSS Installation instructions

23-1/2" MIN
9-1/2" MAX.
Junction box
location
F
JT5000DF
Cutout depth
23-1/2" MIN
F
9-1/2" MAX.
Junction box22" to
location
bottom of
GE 30" Built-In Single Convection Wall Oven
junction box
Conduit
DIMENSIONS
AND INSTALLATION
INFORMATION
40"
22" to
bottom
MOST 30" WALL CABINETS CAN
BE of
junction
box
Conduit
Cutout width
USED WITH THIS UNIT.
22 "
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle.
They must be hard wired in accordance
with installation instructions.
F
Conduit
Junction box
40" location
E
28-1/2" MIN.
28-5/8" MAX.
40"
NOTE: These ovens are not approved
D
for stackable installations. Cabinets
installed adjacent to wall ovens must have
anDadhesion spec of at least a 194°F
rating.
"
22temperature
Cutout depth
23-1/2" MIN
Cutout width
28-1/2" MIN.
28-5/8" MAX.
A
B
A
B
C
C
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Recommended
cutout location
from floor
32-1/2"
D
Recommended
cutout location
from floor
23"32-1/2"
minimum
D
Conduit
40"
Cutout height
E
27-1/4" MIN.
27-5/16" MAX.
22" to
bottom of
junction box
Cutout width
28-1/2" MIN.
28-5/8" MAX
22 "
A
23" minimum
door opening
22 "
allowance
B
C
door opening
allowance
30''
INSTALLATION INFORMATION: Before
30''
installing, consult installation instructions
30''
PT7050
packed with product for ­current
CL
PT7050
JT5000
2 x 4 or
dimensional data.
JT5000
equivalent runners
JT3000
CL
JT3000
x 4 or
2 x 4 or2Side-by-side
level with bottom of cutout
2 x 4 or
installations require
JT5000
JT1000
JT1000
equivalent
runners
equivalent runners
equivalent runners
and flush with sides of cutout
at
least
2"
between
cutouts.
level with bottom of cutout
level
with of
bottom
level with
bottom
cutout of cutout
Cabinetfloor.
Cabinet
30"
Cabinet
30"
or solid bottom
and flush with sides of cutout
and flush
with
sides
of cutout
A – Overlap of oven at top of cutout
and
flush
with
sides of cutout
A – Overlap of A
oven
at top ofof
cutout
or solid bottom floor.
– Overlap
oven at top of cutout 1"
1"
KW RATING
or solidor
bottom
floor.
B – Overlap of oven over side of edges
solid bottom
floor.
B – Overlap of B
oven
over
side
of
edges
of
cutout
3/4"
– Overlap of oven over side of edges of cutout
3/4"
C – Overlap of oven at bottom of cutou
240V 4.2
C – Overlap of oven at bottom of cutout
1-1/4"
Suitable
Oven
C – Overlap of oven at bottom of cutout
1-1/4"
208V 3.2
Suitable
Oven
bracing
D – Install depth
bracing
Oven
(must support 200 lbs.)
to200
support
BREAKER SIZE
lbs.)
D – Install depth
23-1/2"
E – Overall height with trim
to support (must support
runners
runners
D –with
Install
23-1/2"
s.)
F – Overall width
E – Overall height
trimdepth
28-5/8"
240V 20 Amps
200 lbs.)
E
–
Overall
height
with
trim
28-5/8"
F
–
Overall
width
29-3/4"
208V 20 Amps
Dimension and installation
F – Overall width
29-3/4"
information are shown in inches.
ADA
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
COMPLIANT
Listed by
Underwriters
Laboratories
Specification Revised 4/16
JT5000DF
GE 30" Built-In Single Convection Wall Oven
OPTIONAL UNDERCOUNTER DIMENSIONS AND INSTALLATION INFORMATION
NOTE: 36" ribbon cooktop are approved
for use over GE 30" single wall ovens and
warming drawers. 30" ribbon cooktops
are approved for use over 30" and GE 27"
single wall ovens and warming drawers.
Refer to cooktop and wall oven installation
information packed with products for current
dimensional data.
Gas or electric cooktops may be installed over this
oven. See cooktop installation instructions for cutout size.
See label on top of oven for approved cooktop models.
Gas or electric connections
for gas cooktop must be
located in an adjacent
accessible location to the right
240V / 208V
Junction box
location
25
9-1/2"
NOTE: Door handle protrudes 3" from door
face. Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
INSTALLATION INFORMATION: Before
installing, consult installation instructions
packed with products for current dimensional
data and for alternate installation options.
28 1/2" MIN.
28 5/8" MAX.
27 1/4" MIN.
27 5/16" MAX.
Allow 1-1/4"
top/bottom and
1" on sides for
overlap
ELECTRIC WALL OVENS ARE NOT
APPROVED FOR INSTALLATION WITH
A PLUG AND RECEPTACLE. THEY
MUST BE HARD WIRED IN ACCORDANCE
WITH INSTALLATION INSTRUCTIONS.
36"
Typical
countertop
height
22" MIN.
Above
support
platform
24
4"
3/4" Support
platform required
Must Support 200 Lbs.
Dimension and installation
information are shown in inches.
ADA
For answers to your Monogram, GE Café™ Series, GE Profile™ Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center® Service, 800.626.2000.
COMPLIANT
Listed by
Underwriters
Laboratories
Specification Revised 4/16
JT5000DF
GE 30" Built-In Single Convection Wall Oven
FEATURES AND BENEFITS
True European Convection – Achieve delicious results from a third heating
element and fan combination
Convection
Self-clean with steam clean option – Clean your oven the way you want
elf-clean heavy-duty oven racks – Conveniently clean your oven and
S
racks together
Convection
1 Rack/Multi
r
Glass touch controls – Set temperatures quickly and clean with little effort
Halogen interior oven lighting – Easily see how your food is baking
en-pass bake element – Even baking is assured with heat that covers more
T
surface area
ight-pass broil element – Get full broil coverage and even browning from
E
edge to edge
5.0 cu. ft. oven capacity – Cook more dishes at once
Black gloss oven interior – Enjoy a clean and sleek appearance
Hidden bake – Make cleanup easy by eliminating hard-to-reach areas
Model JT5000DFBB – Black on black
GUARANTEED FIT
Replacing a similar wall oven from GE or another brand? GE wall ovens are
guaranteed for an exact fit to make replacement easy
Visit geappliances.com for more info
JT5000DFWW/BB
Specification Revised 4/16