Thermador HMWB30FS Specifications 2016

Add to my manuals
3 Pages

advertisement

Thermador HMWB30FS Specifications 2016 | Manualzz
HMWB30FS
WALL HOOD WITH BLOWER (30-INCH WIDTH)
MASTERPIECE®
GENERAL PROPERTIES
FEATURES & BENEFITS
Operating Mode
Convertible: Ducted /
Recirculating
Maximum CFM
600 CFM
Number of Speed Settings
3-Stage
Motor Location
Integrated
Number Of Lights
Lights Sold
Separately - 2
Bulb Type
50 W - G10 Base
Total Power Of The Lamps (W)
100 W
Damper Included
Yes
- 600 CFM Integrated Blower included
Grease Filter Material
Washable Synthetic
- Recirculation possible with kit RECIRC__FS (max 600 CFM)
Grease Filter Type
Multilayer Cassette
- Three fan speeds plus 10 minute high-power operation mode
TECHNICAL DETAILS
-B
uilt-in ‘Clean Filter‘ reminder light illuminates after 40 hours of
operation
Watts (W)
550 W
Current (A)
15 A
Volts (V)
120 V
Frequency (Hz)
60 HZ
Plug Type
Fixed Connection
- Delayed shut-off tackles lingering odors for up to 10 minutes
ACCESSORIES (OPTIONAL)
Recirculation Kit
DIMENSIONS & WEIGHT
RECIRC30FS - For 30" Hood Only
Replacement Charcoal Filter - CHFILT3036
For Use With Recirculation Kit RECIRC_FS
30" W, 6" H Stainless Steel Duct Cover
DC30US
30" W, 12" H Stainless Steel Duct Cover
DCT30US
30" W Stainless Steel Backsplash
PA30JBS
Overall Appliance Dimensions (Width Of
Canopy Included) (HxWxD) (in)
11" x 30" x 23 1/8"
Required Distance Above Cooktop / Range
Cooking Surface
30" / 30"
Diameter of Air Duct (in) Top
10"
Diameter of Air Duct (in) Back
N/A
Net Weight (lbs)
35 lbs
ACCESSORIES (REQUIRED)
Recirculation Kit
BLOWER OPTIONS
Remote Blower
(Mounted to Roof or External Wall)
N/A
N/A
N/A
Inline Blower
(Mounted Between Kitchen and External Wall)
N/A
Integrated Blower (Mounted in Hood)
N/A
N/A
N/A
WARRANTY
Limited Warranty Parts And Labor
Page 1 of 3
2 Year
11 / 15
HMWB30FS
WALL HOOD WITH BLOWER (30-INCH WIDTH)
MASTERPIECE®
HOOD DIMENSIONS
Page 2 of 3
11 / 15
HMWB30FS
WALL HOOD WITH BLOWER (30-INCH WIDTH)
MASTERPIECE®
OPTIONAL ACCESSORIES
30" WIDE DUCT COVER
DC30US 6" HIGH
DCT30US 12" HIGH
STAINLESS STEEL BACKSPLASH
PA30JBS 30" WIDE
Stainless steel duct cover for wall hood applications
29
(760 mm)
RECIRCULATION KIT
RECIRC30FS 30" WIDE
– Stainless steel finish
– Perfect for hard to duct installations
– Use with 600 CFM blowers only
REPLACEMENT CHARCOAL FILTERS
CHFILT3036
For use with Recirculation Kit RECIRC_FS
These warranties give you specific legal rights and you may have other rights that vary from state to state. Full warranty and limited warranty from date of installation. For complete warranty
details, refer to your Use & Care manual, or ask your dealer.
Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation
engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model
number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada.
Thermador is not responsible for products that are transported from the U.S. for use in Canada.
1 800 735 4328 | USA THERMADOR.COM | CANADA THERMADOR.CA | ©2015 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED.
Page 3 of 3
11 / 15

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement