advertisement
VENTILATION
APPLICATION AND PRODUCT GUIDE
WALL HOOD PH48HS SHOWN WITH PRO HARMONY
PA12GCVRHC GRIDDLE COVER ACCESSORY
® RANGE PRG486GDH WITH
CONTENTS
WHY VENTILATION IS IMPORTANT
HOODS THAT FIT WITH YOUR KITCHEN
SELECTING THE RIGHT HOOD
PRODUCT PAGES
WALL HOODS
CHIMNEY WALL HOODS
ISLAND HOODS
4
5
6–9
10–15
16–21
22–25
CUSTOM INSERTS 26–28
DOWNDRAFT 29–31
RANGE, RANGETOP AND VENTILATION MATRIx – PROFESSIONAL SERIES 32–33
COOKTOP AND VENTILATION MATRIx – MASTERPIECE
BLOWER SELECTION AND DUCT GUIDE
VENTILATION ACCESSORIES
BLOWER OPTIONS
® SERIES
EQUIVALENT DUCT LENGTHS FOR COMMONLY USED TRANSITIONS
FREQUENTLY ASKED QUESTIONS
34–35
36–37
38–39
40
41
42
WARRANTY 43
3
4
WHY VENTILATION IS IMPORTANT
When it comes to ventilation performance, there’s only one name you need to remember. Thermador. Our powerful, quiet systems tackle unwanted smoke, grease, heat and odors, quietly and efficiently.
For all of the warm images your kitchen may conjure up, the fact is, your kitchen can be a major source of pollutants in the home. All of these are released into the air as you are cooking, and can end up on walls, ceilings, carpet, upholstery and drapes. Additionally, in today’s well-sealed homes, insufficient ventilation can cause heat buildup and, in extreme cases, even carbon monoxide poisoning. That’s why choosing a quality ventilation system by Thermador is one of the most important decisions you can make when designing your kitchen.
CLEANLINESS
We understand that keeping your kitchen fresh and clean is a priority.
• Eliminate grease and smoke from your culinary workspace
• Reducing moisture protects the finishes in your home
• Capture grease in dishwasher-safe filters, not on your kitchen cabinets, countertop and floor
HEALTH AND SAfETY
Ventilation fans remove moisture, odor and unhealthy byproducts of combustion, including carbon monoxide and nitrogen oxides.
• Proper ventilation is essential for maintaining a healthy indoor environment and minimizing airborne health risks
• Controlling moisture reduces the cause of many types of mold
• Hood and downdraft ventilation systems handle high heat and exhaust needs to maintain a safe cooking area
ODORS
No need to worry about lingering odors or smoke with these elegant, powerful ventilation systems.
• Blowers freshen up your kitchen with amazing efficiency
• Some models include delayed shutoff to tackle lingering odors
• Switching on the hood a few minutes prior to cooking will start circulating the air and help remove odors once cooking has started
DESIGN
Ventilation can provide a dramatic focal point for your kitchen or it can be concealed for a seamless design.
• Our ventilation systems are meticulously crafted for both function and design
• Choose from our two distinct series to help define your space and coordinate with your Professional or Masterpiece® Series family of appliances
HOODS THAT fIT WITH YOuR kITCHEN
When selecting a ventilation system, choose from one of our two sophisticated appliance collections. Select Professional Series for the ultimate in cooking and venting power or the Masterpiece
®
Series for its sleek styling and numerous convenience functions.
WALL HOODS
Wall hoods offer exceptional, quiet performance and distinctive design options.
• Efficient, high quality, all stainless steel filters
• Halogen lighting
• Deep enclosure area for excellent capture
• Removable dishwasher-safe grease collection tray
• Recirculation option at 600 CFM
CHIMNEY WALL HOODS
Our chimney style wall hoods impart a more traditional feel to the kitchen space.
• Adjustable chimney heights suit a range of ceilings
• All stainless steel or stainless steel with glass designs available
• Halogen lighting
• Dishwasher-safe, stainless steel frame filters
• Automatic Clean Filter Reminder light
ISLAND HOODS
Thermador Island Hoods offer excellent overall efficiency in drawing away smoke, moisture and heat.
• An option for when a wall surface is not available • Halogen lighting
• Dishwasher-safe, stainless steel filters
• Slim and sleek design that does not obstruct the views beyond your kitchen
• All stainless steel or stainless steel with elegant glass canopy design
CuSTOM INSERTS
To create a seamless design with wall or island applications, use custom hood inserts.
• Available options for all types of cooking surfaces
• User-friendly ventilation controls or remote control options
• Wall or island applications
• Halogen lighting
DOWNDRAfTS
Downdraft ventilation offers space efficiency and a sleek look for non-professional cooktops.
• Over 13-inch intake
• Full face filter combines a filter with splatter shield in one easy-to-remove, dishwasher-safe element
• Ideal in island applications
• 600 CFM recirculation kit option with integral blower is available for difficult-to-duct situations
5
6
SELECTING THE RIGHT HOOD
CHOOSING THE CORRECT SIZE AND PLACEMENT
1. DISTANCE fROM COOkING SuRfACE
Proper mounting height is very important. If a hood is mounted too low, it may be difficult to cook and be unsafe. If a hood is mounted too high, performance may be compromised.
For optimal performance, the distance from the cooking surface to the bottom of the hood should be a minimum of 30", unless otherwise noted. Please refer to the installation manual for each hood and cooktop/range model for proper hood mounting heights.
30" MINIMUM
2. HOOD WIDTH
The hood width should be no less than the width of the cooking surface. Where space is not restricted, a wider hood can be used to increase your capture area. Island installations require a greater capture area; therefore the hoods used should overlap your cooking surface up to 3" on either side of the cooktop.
Exception: Downdraft ventilation units should be the same width as the cooking surfaces they are ventilating.
36" DOWNDRAFT
36" GAS COOKTOP
3. AVAILAbLE CEILING HEIGHT
The standard ceiling height can vary from region to region and in homes built in different eras. Ceiling heights, even in the same room, can sometimes vary by as much as several inches. Kitchen ceiling heights can vary between 7'6" (or 90") to over 10' (or 120").
Before selecting your hood, check your available installation space and any extra space that may remain after proper installation of your hood and cooktop or range. This extra space can be filled by integrating with your kitchen cabinetry or by using Thermador's Stainless Steel
Duct Cover or Chimney Extension Accessories. The space can also be adjusted by raising or lowering your hood within the recommended range (typically 30" to 36" above the cooking surface).
Example: The height of your countertop is 36" and you want to add 30" (the minimum distance) between your rangetop to the bottom of the hood. The height of your Thermador
Hood is 11," so 77" minimum is required for proper hood installation (from floor to top of hood).
If your ceiling is 7'6", subtract the space needed from the space available (90"- 77"=13"). In this case, you have 13" of extra space.
COVER OR CABINETRY
11" THERMADOR
HOOD HEIGHT
77" (FLOOR TO TOP
OF HOOD) MINIMUM
FOR PROPER HOOD
INSTALLATION
30" MINIMUM
REQUIRED DISTANCE
FROM RANGETOP TO
BOTTOM OF HOOD
36" COUNTERTOP
HEIGHT
* Duct covers and chimney extensions are available as an accessory when the hood is mounted below the height of the ceiling.
CHOOSING THE CORRECT bLOWER
A variety of interior and exterior blower options are available for
Thermador’s Professional and Masterpiece
®
Series Hoods and
Downdraft Ventilation Units. If the unit you have selected does not have a blower included, choose from one of the following options, which can be purchased separately. See page 40. Blower selection will vary based on the volume of air that needs to be moved and the length and location of the duct run. For long duct runs with multiple turns and bends, consider using a more powerful blower.
1. REMOTE bLOWERS (VTR SERIES)
Depending on your preference and ducting situation, these blowers can be mounted on the roof or exterior wall of your home.
An exterior installation may be more appealing to reduce noise in the kitchen.
2. INLINE bLOWERS (VTI SERIES)
To minimize noise in the kitchen, these blowers are mounted along the duct line anywhere between the kitchen and the exterior wall. If you have easy access to your duct line (in an attic, for example), this maybe an appealing option.
3. INTEGRAL bLOWERS (VTN SERIES)
These blowers are purchased separately and integrated into the hood or onto the downdraft unit at the time of installation. This option allows you to select your ideal hood with the exact power you require.
SPECIAL NOTE
Always allow access to the blower for serviceability, should it be needed.
3.
2.
1.
7
8
SELECTING THE RIGHT HOOD
CHOOSING THE RIGHT CfM
1. POWER AND SIZE Of THE COOkTOP
The power of your cooktop, measured in BTUs (British thermal units), is perhaps the most important factor in determining CFM
(cubic feet per minute) needs for your hood.
PROfESSIONAL SERIES RANGES AND RANGETOPS
Thermador’s Professional Series Hoods are tested and approved to withstand the high heat generated by our Professional Ranges and Rangetops.
Professional gas cooktops generally should have 1 CFM for every
100 BTUs.
MASTERPIECE® SERIES COOkTOPS
Thermador’s Masterpiece Series Hoods are best matched with our non-professional cooking products.
For electric and induction cooktops, and gas cooktops under
60,000 BTUs, choose a blower with a minimum of 100 CFM per
12" of cooktop width.
Example: A Thermador 36" wide Cooktop requires a blower with a minimum of 300 CFM.
Example: A Thermador 30" Professional Range with a
60,000 BTU Cooktop should have a 600 CFM Hood. It is also important to note that this method assumes that all burners are on high at the same time. Griddles and grills generally require an additional 200 CFM.
30" PROFESSIONAL
WALL HOOD (600 CFM)
36" HOOD WITH
>_300 CFM
+
30" PRO GRAND
RANGE (60,000 BTU)
+
36" INDUCTION
COOKTOP
CHOOSING THE RIGHT CfM
2. COOkING STYLE
The appropriate airflow capacity is determined by evaluating the cooking space and the occupants’ cooking habits.
• More demanding cooks usually require more exhaust capacity to handle moisture generated by boiling large pots of water or the grease and smoke resulting from grilling or frying. This cooking style could require a hood or downdraft system with airflow of 600 to 1300 CFM.
• High heat cooking or aromatic foods may require additional CFM.
Increasing capture area by 3" on each side is also a recommended way to address this issue.
• For those who are used to preparing quick meals in a relatively small kitchen, a hood with 400 to 600 CFM may be adequate ventilation for the cooking space.
• If the cooking surface is in a peninsula or island, a larger capacity hood can provide better capture when there are cross currents and when the hood needs to be mounted higher. Downdraft ventilation systems are also a good alternative.
If using a 10" duct, Thermador recommends not exceeding 150 feet of duct. Transitions, elbows and wall or roof caps are all factors that will add more static pressure, therefore increasing your equivalent duct run.
Example: Assume you have 30 feet of straight 10" duct with two 90-degree elbows and an outside wall cap. To calculate the equivalent straight duct run pressure, you would add
12 feet for each elbow, and 5 feet for the outside wall cap, increasing your equivalent total run from 30 to 59 feet.
DUCT STATIC PRESSURE EQUIVALENTS
30' DUCT WITH 2 ELBOWS
AND AN OUTSIDE WALL CAP
=
3. LENGTH AND SIZE Of DuCT WORk
Proper performance is dependent upon proper ducting. Use a qualified and trained installer.
• Do not use flexible duct; it creates back pressure/air turbulence and reduces performance.
• Straight runs and gradual turns are best. Use the shortest route with the fewest turns possible.
• Check local codes for makeup air requirements, if any. For more information on makeup air, see page 42.
59' OF STRAIGHT DUCTING
For more information on the equivalent duct lengths for commonly used transitions, see page 41.
9
10
WALL
HOODS
Thermador Wall Hoods put the finishing touch on your cooking system, with deep capture areas for the best overall efficiency in drawing away smoke, moisture and heat.
These elegant hoods combine style with vigorous performance, generating ventilation power from 600 to 1300 CFM. Available in a variety of heights, widths and depths, they accommodate your individual venting needs.
All models include brilliant halogen lighting for enhanced visibility and convenient speed controls. For ultra-simple cleanup, the removable filters and grease collection trays fit easily in your dishwasher.
WALL HOOD PH48HS SHOWN WITH PRO HARMONY ® RANGE
PRG486GDH WITH PA12GCVRHC GRIDDLE COVER ACCESSORY;
STEAM AND CONVECTION OVEN MES301HP SHOWN WITH
30-INCH TRIM kIT AND SINGLE OVEN POD301
WALL HOODS
PROfESSIONAL SERIES 27-INCH DEPTH WALL HOOD (30"/36"/42"/48"/54")
PH30CS / PH36CS / PH42CS / PH48CS / PH54CS
SPECIfICATIONS
Available Hood Widths
UL Approved for Damp
Environments
30", 36", 42", 48", 54"
Yes
Blower Sold Separately –
See Blower Options Table
PERfORMANCE
- Three fan speeds
- Filters are highly efficient at capturing grease
- Powerfully quiet ventilation systems
-
-
UL approved for damp environments
Extended capture area ensures removal of smoke and odor
Duct Size at Discharge
Ducting Direction
Dishwasher-Safe Filters
Halogen Lighting 12 Volt,
20 Watt Max., G-4 Base, Included
Infrared Keep-Hot Lights
PAR-38 175W or PAR-40
250W, Included
10" Round
Vertical or Horizontal
Commercial-Style Baffle
30", 36", 42" – 2 Bulbs
48", 54" – 3 Bulbs
2
DESIGN
- 27-inch depth, 18-inch tall
- Brushed stainless steel finish
- Double wall construction
- Welded, polished seams for a flawless design
- Easy to operate control buttons
- 27-inch depth, 18-inch tall hood is a perfect companion to the Pro Grand® Professional Range
Electrical bLOWER OPTIONS
REMOTE
VTR630D – 600 CFM
120V AC, 60Hz
See page 40 for further details.
Use RFPLT600 in roof-mount applications
VTR1030D – 1000 CFM
VTR1330E – 1300 CFM
Use RFPLT1000 in roof-mount applications
CAPACITY
- Seven different blowers to choose from the lineup according to cooking needs
- Blowers sold separately
INLINE
VTI610D – 600 CFM
VTI1010D – 1000 CFM Use WC10 Wall Cap
INTEGRATED
VTN630C – 600 CFM
CONVENIENCE
- Halogen lighting spotlights your best recipes
- Two Infrared Keep-Hot Lamps hold food warm until serving time
VTN1030C – 1000 CFM Use WC10 Wall Cap
- Dishwasher-safe commercial-style baffle filter
REMOTE bLOWER ACCESSORIES
See page 39 for further details.
- Dimmer lighting
- Grease collection trays are easily removed, dishwasher-safe
- After 40 hours of operation, the Clean Filter button illuminates
Roofplate – RFPLT600 Use with Remote Blower
VTR630D
- Auto start High Heat Sensor
Roofplate – RFPLT1000
- Delayed shutoff tackles lingering odors for up to 10 minutes
- Hood includes filters, lights, backdraft damper and transition
ACCESSORIES
See page 38 for further details.
- Choose from Inline, Remote or Integrated Blowers
Use with Remote Blowers
VTR1030D and VTR1330E
DC__US – 6-Inch High Duct Cover KHS__QS – Keep-Hot Shelf
DCT__US – 12-Inch High Duct Cover
Width 6-Inch High 12-Inch High
(30"/36"/42"/48")
KHS30QS/KHS36QS/KHS42QS/
KHS48QS
54"
48"
42"
36"
30"
12"
30-Inch
36-Inch
42-Inch
48-Inch
54-Inch
DC30US
DC36US
N/A
DC48US
N/A
DCT30US
DCT36US
DCT42US
DCT48US
N/A
21
18"
4"
Notes: Please refer to installation instructions. Installation instructions are available at www.thermador.com. Specifications are correct at the time of printing. Thermador reserves the right to change product specifications and design at any time, without notice.
11
WALL HOODS
PROfESSIONAL SERIES 24-INCH DEPTH WALL HOOD (30"/36"/48")
PH30HS / PH36HS / PH48HS
PERfORMANCE
- Three fan speeds
- Filters are highly efficient at capturing grease
- Powerfully quiet ventilation systems
- Extended capture area ensures removal of smoke and odors
- Approved by CSA for damp environments
DESIGN
- 24-inch depth, 18-inch tall
- Brushed stainless steel finish
- Chiseled design for a seamless integration into any kitchen
- Stainless steel control buttons
- Stainless steel professional baffle filters
- 24-inch depth hood is 18-inches tall and a perfect companion with Pro Harmony Ranges and Rangetops
CAPACITY
- Seven different blowers to choose from the lineup according to cooking needs
- Blowers sold separately
CONVENIENCE
- Halogen lighting spotlights your best recipes
- Dishwasher-safe stainless steel baffle filters
- Dimmer lighting – for a soft lighting effect
- Dishwasher-safe grease collection trays are easily removed
- Built-in Clean Filter Reminder light illuminates after 40 hours of operation
- Delayed shutoff tackles lingering odors for up to 10 minutes
- Auto start High Heat Sensor
- Hood includes filters, lights, backdraft damper and transition
- Choose from Inline, Remote or Integrated Blowers
48
36"
30"
12"
SPECIfICATIONS
Available Hood Widths
CSA Approved for Damp
Environments
Blower
Duct Size at Discharge
Ducting Direction
Dishwasher-Safe Filters
Halogen Lighting
12 Volt, 20 Watt Max.,
G-4 Base, Included
Electrical
30", 36", 48"
Yes
Sold Separately –
See Blower Options Table
10"
Vertical or Horizontal
Commercial-Style Stainless
Steel Baffle Filter
30", 36" – 2 Bulbs
48" – 4 Bulbs
120V AC, 60Hz bLOWER OPTIONS
See page 40 for further details.
REMOTE
VTR630D – 600 CFM Use RFPLT600 in roof-mount applications
VTR1030D – 1000 CFM
VTR1330E – 1300 CFM
INLINE
VTI610D – 600 CFM
VTI1010D – 1000 CFM
INTEGRATED
VTN630C – 600 CFM
VTN1030C – 600 CFM
Use RFPLT1000 in roof-mount applications
Use WC10 Wall Cap
REMOTE bLOWER ACCESSORIES
See page 39 for further details.
Roofplate – RFPLT600 Use with Remote Blower
VTR630D
Roofplate – RFPLT1000 Use with Remote Blowers
VTR1030D and VTR1330E
ACCESSORIES
See page 38 for further details.
DC__US – 6-Inch High Duct Cover
DCT__US – 12-Inch High Duct Cover
Width
30-Inch
36-Inch
48-Inch
6-Inch High 12-Inch High
DC30US DCT30US
DC36US
DC48US
DCT36US
DCT48US
21
18"
4"
12
Notes: Please refer to installation instructions. Installation instructions are available at www.thermador.com. Specifications are correct at the time of printing. Thermador reserves the right to change product specifications and design at any time, without notice.
WALL HOODS
PROfESSIONAL SERIES 24-INCH DEPTH WALL HOOD WITH bLOWER (30"/36"/48")
HPWB30FS / HPWB36FS / HPWB48FS
PERfORMANCE
- Three fan speeds
- Filters are highly efficient at capturing grease
- Powerfully quiet ventilation systems
- Extended capture area ensures removal of smoke and odor
DESIGN
- 24-inch depth, 11-inch tall
- Brushed stainless steel finish
- Welded, polished seams for a flawless design
- Stainless steel button controls
CAPACITY
- Integrated Blower included
- Recirculation possible with kit RECIRC__FS (max 600 CFM)
CONVENIENCE
- Halogen lighting spotlights your best recipes
- Dishwasher-safe low-profile baffle filters
- Grease collection trays are easily removed, dishwasher-safe
- Built-in Clean Filter Reminder light
- Delayed shutoff tackles lingering odors for up to 10 minutes
- Hood includes filters, backdraft damper and transition
- Accessories include: 6" Duct Covers or 12" Duct Covers
SPECIfICATIONS
Available Hood Widths
Blower
Duct Size at Discharge
Ducting Direction
Dishwasher-Safe Filters
Halogen Lighting
120 Volt, 50 Watt Max.,
GU10 Base, Not Included
Electrical
30", 36", 48"
30" – 600 CFM
Blower Included
36" – 1200 CFM
Blower Included
48" – 1200 CFM
Blower Included
10" Round
Vertical
Low-Profile Baffle
30", 36" – 2 Bulbs
48" – 3 Bulbs
120V AC, 60Hz
ACCESSORIES
See page 38 for further details.
DC__US – 6-Inch High Duct Cover
DCT__US – 12-Inch High Duct Cover
Width
30-Inch
36-Inch
48-Inch
6-Inch High 12-Inch High
DC30US DCT30US
DC36US
DC48US
DCT36US
DCT48US
CHFILT3036 – Replacement Charcoal Filters
For use with Recirculation Kit
RECIRC30FS – Recirculation Kit
For 30" Hood Only
4"
30"
12"
Notes: Please refer to installation instructions. Installation instructions are available at www.thermador.com. Specifications are correct at the time of printing. Thermador reserves the right to change product specifications and design at any time, without notice.
13
WALL HOODS
MASTERPIECE SERIES WALL HOOD (30"/36"/48")
HMWN30FS / HMWN36FS / HMWN48FS
PERfORMANCE
- Three fan speeds plus 10 minute high-power operation mode
- Filters are highly efficient at capturing grease
- Powerfully quiet ventilation systems
- Extended capture area ensures removal of smoke and odor
DESIGN
- Classic chiseled design matches Thermador’s Masterpiece
®
Series family of kitchen appliances
- Brushed stainless steel finish
- Welded, polished seams for a flawless design
- Premium electronic touch controls
CAPACITY
- Recirculation possible with kit RECIRC__FS (max 600 CFM)
- Blowers sold separately
CONVENIENCE
- Halogen lighting spotlights your best recipes
- Dishwasher-safe low-profile baffle filters
- Grease collection trays are easily removed, dishwasher-safe
- Built-in Clean Filter Reminder light
- Delayed shutoff tackles lingering odors for up to 10 minutes
- Choose from Inline, Remote or Integrated Blowers
- Hood includes filters, backdraft damper and transition
SPECIfICATIONS
Available Hood Widths
Blower
Duct Size at Discharge
Ducting Direction
Dishwasher-Safe Filters
Halogen Lighting
120 Volt, 50 Watt Max.,
GU10 Base, Not Included
Electrical
30", 36", 48"
Sold separately –
See Blower Options table
10" Round
Vertical
Low-Profile Baffle
30", 36" – 2 Bulbs
48" – 3 Bulbs
120V AC, 60Hz bLOWER OPTIONS
See page 40 for further details.
REMOTE
VTR630D – 600 CFM Use RFPLT600 in roof-mount applications
VTR1030D – 1000 CFM Use RFPLT1000 in roof-mount applications
Use RFPLT1000 in roof-mount applications
VTR1330E – 1300 CFM
(Not for use with 30" hood)
INLINE
VTI610D – 600 CFM
VTI1010D – 1000 CFM
INTEGRATED
VTN600F – 600 CFM
VTN1000F – 1200 CFM Not for use with 30" hood
REMOTE bLOWER ACCESSORIES
See page 39 for further details.
Roofplate – RFPLT600 Use with Remote Blower
VTR630D
Roofplate – RFPLT1000 Use with Remote Blowers
VTR1030D and VTR1330E
ACCESSORIES
See page 38 for further details.
DC__US – 6-Inch High Duct Cover
DCT__US – 12-Inch High Duct Cover
Width
30-Inch
36-Inch
48-Inch
6-Inch High 12-Inch High
DC30US DCT30US
DC36US
DC48US
DCT36US
DCT48US
CHFILT3036 – Replacement Charcoal Filters
For use with Recirculation Kit
RECIRC_FS – Recirculation Kit
(30"/36") RECIRC30FS/RECIRC36FS
For use with 600 CFM Blowers only
4"
30" , 36"
12"
14
Notes: Please refer to installation instructions. Installation instructions are available at www.thermador.com. Specifications are correct at the time of printing. Thermador reserves the right to change product specifications and design at any time, without notice.
WALL HOODS
MASTERPIECE SERIES WALL HOOD WITH bLOWER (30"/36")
HMWB30FS / HMWB36FS
PERfORMANCE
- Three fan speeds plus 10 minute high-power operation mode
- Filter systems are highly efficient at capturing grease
- Powerfully quiet ventilation systems
- Extended capture area ensures removal of smoke and odor
DESIGN
- Classic chiseled design matches Thermador’s Masterpiece
®
Series family of kitchen appliances
- Brushed stainless steel finish
- Welded, polished seams for a flawless design
- Easy to operate control buttons
CAPACITY
- 600 CFM Integrated Blower included
- Recirculation possible with kit RECIRC__FS (max 600 CFM)
CONVENIENCE
- Halogen lighting spotlights your best recipes
- Dishwasher-safe low-profile baffle filters
- Grease collection trays are easily removed, dishwasher-safe
- Hood includes filters, backdraft damper and transition
SPECIfICATIONS
Available Hood Widths
Blower
Duct Size at Discharge
Ducting Direction
Dishwasher-Safe Filters
Halogen Lighting
120 Volt, 50 Watt Max.,
GU10 Base, Not Included
Electrical
30", 36"
600 CFM Blower Included
10" Round
Vertical
Low-Profile Baffle
2 Bulbs
120V AC, 60Hz
ACCESSORIES
See page 38 for further details.
DC__US – 6-Inch High Duct Cover
DCT__US – 12-Inch High Duct Cover
Width
30-Inch
36-Inch
6-Inch High 12-Inch High
DC30US
DC36US
DCT30US
DCT36US
CHFILT3036 – Replacement Charcoal Filters
For use with Recirculation Kit
RECIRC_FS – Recirculation Kit
(30"/36") RECIRC30FS/RECIRC36FS
4"
30" , 36"
12"
Notes: Please refer to installation instructions. Installation instructions are available at www.thermador.com. Specifications are correct at the time of printing. Thermador reserves the right to change product specifications and design at any time, without notice.
15
16
CHIMNEY
WALL
HOODS
Our Masterpiece
®
Series chimney style wall hoods impart a more traditional feel to the kitchen space and create a dramatic gathering point. Each model is adjustable to suit a range of ceiling heights and includes conveniences such as dishwasher-safe, anodized filters and electronic 4-speed controls. Halogen lighting brilliantly illuminates your cooking space for excellent visibility.
CHIMNEY WALL DRAWER HOOD HDDW36fS SHOWN WITH
GAS COOkTOP SGSX365fS AND WALL OVEN ME301ES
CHIMNEY WALL HOODS
MASTERPIECE SERIES CHIMNEY WALL HOOD (36"/42")
HMCN36FS / HMCN42FS
PERfORMANCE
- Three fan speeds plus 10 minute high-power operation mode
- Filters are highly efficient at capturing grease
- Powerfully quiet ventilation systems
DESIGN
- Classic chiseled design matches Thermador’s Masterpiece ®
Series family of kitchen appliances
- Brushed stainless steel finish
- Welded, polished seams for a flawless design
- Premium electronic touch controls
CAPACITY
- Six different blowers to choose from the lineup according to cooking needs
- Blowers sold separately
CONVENIENCE
- Halogen lighting spotlights your best recipes
- Dishwasher-safe stainless-frame mesh filters
- Dimmer lighting – for those hours after a late meal
- Built-in Clean Filter Reminder light
- Telescopic chimney – adjustable at installation
- Delayed shutoff tackles lingering odors for up to 10 minutes
- Choose from Inline, Remote or Integrated Blowers
SPECIfICATIONS
Available Hood Widths
Blower
Duct Size at Discharge
Ducting Direction
Ceiling Heights
Dishwasher-Safe Filters
Halogen Lighting
12 Volt, 20 Watt Max.,
G-4 Base, Included
Electrical
36", 42"
Sold Separately—
See Blower Options Table
8" Round
Vertical
8 ft. to 9 ft.
3 Mesh with Stainless Frame
3 Bulbs
120V AC, 60Hz bLOWER OPTIONS
See page 40 for further details.
REMOTE
VTR630D – 600 CFM Use RFPLT600 in roof-mount applications
VTR1030D – 1000 CFM
VTR1330E – 1300 CFM
INLINE
VTI610D – 600 CFM
VTI1010D – 1000 CFM
INTEGRATED
VTN1080F – 1000 CFM
Use RFPLT1000 in roofmount applications
REMOTE bLOWER ACCESSORIES
See page 39 for further details.
Roofplate – RFPLT600 Use with Remote Blower
VTR630D
Roofplate – RFPLT1000 Use with Remote Blowers
VTR1030D and VTR1330E
ACCESSORIES
See page 38 for further details.
CHIMxHMC – Chimney Extension
For up to 11' ceiling applications
Notes: Please refer to installation instructions. Installation instructions are available at www.thermador.com. Specifications are correct at the time of printing. Thermador reserves the right to change product specifications and design at any time, without notice.
17
CHIMNEY WALL HOODS
MASTERPIECE SERIES CHIMNEY WALL HOOD WITH bLOWER (36"/42")
HMCB36FS / HMCB42FS
PERfORMANCE
- Three fan speeds plus 10 minute high-power operation mode
- Filters are highly efficient at capturing grease
- Powerfully quiet ventilation systems
DESIGN
- Classic chiseled design matches Thermador’s Masterpiece ®
Series family of kitchen appliances
- Brushed stainless steel finish
- Welded, polished seams for a flawless design
- Easy to operate control buttons
CAPACITY
- 600 CFM Integrated Blower included
CONVENIENCE
- Halogen lighting spotlights your best recipes
- Dishwasher-safe stainless-frame mesh filters
- Telescopic chimney – adjustable at installation
- Hood includes filters, lights, backdraft damper and transition
SPECIfICATIONS
Available Hood Widths
Blower
Duct Size at Discharge
Ducting Direction
Ceiling Heights
Dishwasher-Safe Filters
Halogen Lighting
12 Volt, 20 Watt Max.,
G-4 Base, Included
Electrical
36", 42"
600 CFM Blower Included
6" Round
Vertical
8 ft. to 9 ft.
3 Mesh w/Stainless Frame
3 Bulbs
120V AC, 60Hz
ACCESSORIES
See page 38 for further details.
CHIMxHMC – Chimney Extension
CHIMNEY WALL HOODS
MASTERPIECE SERIES PIVOT-LIfT GLASS CANOPY CHIMNEY WALL HOOD (36")
HGEW36FS
PERfORMANCE
- Lower the unique glass canopy for greater capture area
- Three fan speeds plus 10 minute high-power operation mode
- Filters are highly efficient at capturing grease
- Powerfully quiet ventilation systems
DESIGN
- Brushed stainless steel finish
- Welded, polished seams for a flawless design
- Premium electronic touch controls
- Elegantly curved glass canopy
CAPACITY
- 600 CFM Integrated Blower included
CONVENIENCE
- Halogen lighting spotlights your best recipes
- Dishwasher-safe stainless-frame mesh filters
- Dimmer lighting – for those hours after a late meal
- Unique canopy pivots up – offering increased head room
- Built-in Clean Filter Reminder light
- Telescopic chimney – adjustable at installation
- Delayed shutoff tackles lingering odors for up to 10 minutes
- Hood includes filters, lights, backdraft damper and transition
SPECIfICATIONS
Available Hood Widths
Blower
Duct Size at Discharge
Ducting Direction
Ceiling Heights
Dishwasher-Safe Filters
Halogen Lighting
12 Volt, 20 Watt Max.,
G-4 Base, Included
Electrical
36"
600 CFM Blower Included
6" Round
Vertical
8 ft. to 9 3 /
4
ft.
1 Mesh
2 Bulbs
120V AC, 60Hz
ACCESSORIES
See page 38 for further details.
CHIMxHGE – Chimney Extension
For up to 11' ceiling applications
Installation Note: This product ships with two transport brackets to hold the moveable canopy in place during shipping and installation. After installation, be sure to remove the brackets to operate the pivot-lift glass canopy.
18
Notes: Please refer to installation instructions. Installation instructions are available at www.thermador.com. Specifications are correct at the time of printing. Thermador reserves the right to change product specifications and design at any time, without notice. Notes: Please refer to installation instructions. Installation instructions are available at www.thermador.com. Specifications are correct at the time of printing. Thermador reserves the right to change product specifications and design at any time, without notice.
19
CHIMNEY WALL HOODS
MASTERPIECE SERIES CHIMNEY WALL DRAWER HOOD (36")
HDDW36FS
PERfORMANCE
- Three fan speeds plus 10 minute high-power operation mode
- 45% increase in capture area when hood is extended
- Filters are highly efficient at capturing grease
- Powerfully quiet ventilation systems
- Sound insulation mats make this hood barely audible
DESIGN
- Classic chiseled design matches Thermador’s Masterpiece
®
Series family of kitchen appliances
- Brushed stainless steel finish
- Welded, polished seams for a flawless design
- Premium electronic touch controls
CAPACITY
- 600 CFM Integrated Blower included
CONVENIENCE
- Halogen lighting spotlights your best recipes
- Dishwasher-safe stainless-frame mesh filters
- Dimmer lighting – for those hours after a late meal
- Unique sliding stainless steel canopy can be pushed back against the wall to increase the capture area
- Built-in Clean Filter Reminder light
- Telescopic chimney – adjustable at installation
- Delayed shutoff tackles lingering odors for up to 10 minutes
- Hood includes filters, lights, backdraft damper and transition
SPECIfICATIONS
Available Hood Widths
Blower
Duct Size at Discharge
Ducting Direction
Ceiling Heights
Dishwasher-Safe Filters
Halogen Lighting
12 Volt, 20 Watt Max.,
G-4 Base, Included
Electrical
36"
600 CFM Blower Included
6" Round
Vertical
7 3 /
4
ft. to 9 1 /
2
ft.
4 Mesh w/Stainless Frame
4 Bulbs
120V AC, 60Hz
ACCESSORIES
See page 38 for further details.
CHIMxHDD – Chimney Extension
For up to 11' ceiling applications
Installation Note: This product ships with two transport brackets to hold the moveable canopy in place during shipping and installation. After installation, be sure to remove the brackets to operate the sliding drawer canopy.
20
Notes: Please refer to installation instructions. Installation instructions are available at www.thermador.com. Specifications are correct at the time of printing. Thermador reserves the right to change product specifications and design at any time, without notice.
ISLAND
HOODS
Thermador Island Hoods put the finishing touches on your cooking system, with excellent overall efficiency in drawing away smoke, moisture and heat. The adjustable chimney height is perfect over island cooktop or range installations. Dishwasher-safe filters make cleanup easy.
22
ISLAND HOOD HPIN42HS SHOWN WITH INDuCTION COOkTOP
CIT365Cb; STEAM AND CONVECTION OVEN MES301HS SHOWN WITH
30" TRIM kIT AND WARMING DRAWER; fRENCH DOOR REfRIGERATOR
T36IT71NNP SHOWN WITH CuSTOM PANELS
ISLAND HOODS
PROfESSIONAL SERIES LOW PROfILE ISLAND HOOD (42"/48")
HPIN42HS / HPIN48HS
PERfORMANCE
- Three fan speeds
- Filters are highly efficient at capturing grease
- Powerfully quiet ventilation systems
DESIGN
- Chiseled design for a seamless integration into any kitchen
- Brushed stainless steel finish
- Low profile stainless steel baffle filters
- Stainless steel control buttons
CAPACITY
- Choose from our five blower options
- Blowers sold separately
CONVENIENCE
- Halogen lighting spotlights your best recipes
- Dishwasher-safe frameless filters with stainless steel covers
- Dimmer lighting – for a soft lighting effect
- Built-in Clean Filter Reminder light illuminates after 40 hours of operation
- Delayed shutoff tackles lingering odors for up to 10 minutes
- Hood includes filters and lights
SPECIfICATIONS
Available Hood Widths
Blower
Duct Size at Discharge
Ducting Direction
Ceiling Heights
Dishwasher-Safe Filters
Halogen Lighting
12 Volt, 20 Watt Max.,
G-4 Base, Included
Electrical
42", 48"
Sold Separately—
See Blower Options Table
6" Round
Vertical
8 ft. to 9 ft.
Stainless Steel Filter
4 Bulbs
120V AC, 60Hz bLOWER OPTIONS
See page 40 for further details.
REMOTE
VTR630D – 600 CFM Use RFPLT600 in roof-mount applications
VTR1030D – 1000 CFM
VTR1330E – 1300 CFM
INLINE
VTI610D – 600 CFM
VTI1010D – 1000 CFM
Use RFPLT1000 in roof-mount applications
REMOTE bLOWER ACCESSORIES
See page 39 for further details.
Roofplate – RFPLT600 Use with Remote Blower
VTR630D
Roofplate – RFPLT1000 Use with Remote Blowers
VTR1030D and VTR1330E
Notes: Please refer to installation instructions. Installation instructions are available at www.thermador.com. Specifications are correct at the time of printing. Thermador reserves the right to change product specifications and design at any time, without notice.
23
ISLAND HOODS
MASTERPIECE SERIES LOW PROfILE ISLAND HOOD (42"/48")
HPIB42HS / HPIB48HS
PERfORMANCE
- Three fan speeds
- Filters are highly efficient at capturing grease
- Powerfully quiet ventilation systems
DESIGN
- Chiseled design for a seamless integration into any kitchen
- Brushed stainless steel finish
- Stainless steel control buttons
CAPACITY
- 600 CFM Blower included
- Recirculation option possible
CONVENIENCE
- All-in-one low profile solution with the flexibility of having an integrated blower
- Halogen lighting spotlights your best recipes
- Dishwasher-safe frameless filters with stainless steel covers
- Dimmer lighting – for a soft lighting effect
- Built-in Clean Filter Reminder light illuminates after 40 hours of operation
- Delayed shutoff tackles lingering odors for up to 10 minutes
- Hood includes filters and lights
SPECIfICATIONS
Available Hood Widths
Blower
Duct Size at Discharge
Ducting Direction
Ceiling Heights
Dishwasher-Safe Filters
Halogen Lighting
12 Volt, 20 Watt Max.,
G-4 Base, Included
Electrical
42", 48"
600 CFM Blower Included
6" Round
Vertical
8 ft. to 9 ft.
Stainless Steel Filter
4 Bulbs
120V AC, 60Hz
ACCESSORIES
See page 38 for further details.
CHFILISL – Replacement Charcoal Filters
For use with Recirculation Kit
RECIRISL – Recirculation Kit
EXTERNAL EXHAuST INTERNAL RECIRCuLATION
ISLAND HOODS
MASTERPIECE SERIES GLASS ISLAND HOOD (40")
HMIB40HS
PERfORMANCE
- Four fan speeds including one intensive level
- Filters are highly efficient at capturing grease
- Powerfully quiet ventilation system
- Perfect fit for 30-inch and 36-inch cooktops
DESIGN
- Chiseled design for a seamless integration into any kitchen
- Brushed stainless steel finish
- Stunning combination of glass and stainless steel with
Masterpiece® design elements
CAPACITY
- 600 CFM Blower included
- Recirculation option possible
CONVENIENCE
- Halogen lighting spotlights your best recipes
- Dishwasher-safe stainless-frame mesh filters
- Dimmer lighting – for a soft lighting effect completely adjustable by user
- Built-in Clean Filter Reminder light illuminates after 40 hours of operation
- Easy to operate touch control buttons
- Hood includes filters and lights
EXTERNAL EXHAuST INTERNAL RECIRCuLATION
SPECIfICATIONS
Available Hood Widths
Blower
Duct Size at Discharge
Ducting Direction
Ceiling Heights
Dishwasher-Safe Filters
Halogen Lighting
12 Volt, 20 Watt Max.,
G-4 Base, Included
Electrical
40"
600 CFM Blower Included
6" Round
Vertical
8 ft. to 9 ft.
Stainless Steel Mesh Filter
4 Bulbs
120V AC, 60Hz
ACCESSORIES
See page 38 for further details.
CHFILISL – Replacement Charcoal Filters
For use with Recirculation Kit
RECIRISL – Recirculation Kit
24
Notes: Please refer to installation instructions. Installation instructions are available at www.thermador.com. Specifications are correct at the time of printing. Thermador reserves the right to change product specifications and design at any time, without notice. Notes: Please refer to installation instructions. Installation instructions are available at www.thermador.com. Specifications are correct at the time of printing. Thermador reserves the right to change product specifications and design at any time, without notice.
25
CUSTOM
INSERTS
Use Thermador Custom Hood Inserts within custom hood applications to create a seamless design with wall or island applications. These inserts efficiently and quietly remove odor and steam with easyto-access controls. Inserts are available for both professional and non-professional applications
26
PROfESSIONAL SERIES CuSTOM INSERT VCI248DS
CuSTOM INSERTS
PROfESSIONAL SERIES CuSTOM INSERT (30"/36"/48")
VCI230DS / VCI236DS / VCI248DS
PERfORMANCE
- Three fan speeds
- Filters are highly efficient at capturing grease
- Powerfully quiet ventilation systems
- Deep capture area allows for efficient capture of smoke and steam
DESIGN
- Suitable for wall or island applications
- Stainless steel button controls
CAPACITY
- Choose from five blower options
- Blowers sold separately
CONVENIENCE
- Halogen lighting spotlights your best recipes
- Dishwasher-safe aluminum mesh filters
- All-stainless steel baffle filters are available as an accessory
- Built-in Clean Filter Reminder light
- Delayed shutoff tackles lingering odors for up to 10 minutes
- Choose from Inline, Remote or Integrated Blowers
SPECIfICATIONS
Available Hood Widths
Blower
Duct Size at Discharge
Ducting Direction
Dishwasher-Safe Filters
Halogen Lighting
120 Volt, 20 Watt Max.,
G-4 Base, Included
Electrical
30", 36", 48"
Sold Separately—
See Blower Options Table
10" Round
Vertical
Mesh (Baffle filters sold as an accessory)
30", 36" – 2 Bulbs
48" – 4 Bulbs
120V AC, 60Hz bLOWER OPTIONS
See page 40 for further details.
REMOTE
VTR630D – 600 CFM Use RFPLT600 in roof-mount applications
VTR1030D – 1000 CFM
VTR1330E – 1300 CFM
INLINE
VTI610D – 600 CFM
VTI1010D* – 1000 CFM
INTEGRATED
VTI610D – 600 CFM
VTI1010D* – 1000 CFM
Use RFPLT1000 in roof-mount applications
Inline blower can be used for an integrated solution
REMOTE bLOWER ACCESSORIES
See page 39 for further details.
Roofplate – RFPLT600 Use with Remote Blower
VTR630D
Roofplate – RFPLT1000 Use with Remote Blowers
VTR1030D and VTR1330E
ACCESSORIES
See page 38 for further details.
VCI2REMFS –
Remote Control Panel
BAFFLT_ – Baffle Filters
(30"/36"/48")
BAFFLT30/BAFFLT36/
BAFFLT48
LINER_ – Custom Hood Liners
(30"/36"/48")
LINER30/LINER36/LINER48
Installation Note: Professional Rangetops and Ranges require that minimum distances be maintained from the cooking surface to combustible materials (i.e. a wood covering around the insert). These minimum distances range from 30" to 40" and can vary from product to product and by manufacturer. Refer to the installation manual of the rangetop or range prior to the design and installation of the custom hood insert.
*Please visit thermador.com for installation tips and details.
Notes: Please refer to installation instructions. Installation instructions are available at www.thermador.com. Specifications are correct at the time of printing. Thermador reserves the right to change product specifications and design at any time, without notice.
27
CuSTOM INSERTS
MASTERPIECE SERIES CuSTOM INSERT WITH bLOWER (21"/29")
VCI21CS / VCI29CS
SPECIfICATIONS
Available Hood Widths
Installation Width
Blower
Duct Size at Discharge
Ducting Direction
Dishwasher-Safe Filters
Halogen Lighting
120 Volt, 20 Watt Max.,
G-4 Base, Included
Electrical
PERfORMANCE
- Three fan speeds plus 10 minute high-power operation mode
- Filters are highly efficient at capturing grease
- Powerfully quiet ventilation systems
DESIGN
- Suitable for wall or island applications
- Slide control for easy power adjustments
CAPACITY
- 400 CFM Integrated Blower included
CONVENIENCE
- Halogen lighting spotlights your best recipes
- Dishwasher-safe aluminum mesh filters
- Hood includes filters, lights, backdraft damper and transition
21", 29"
VCI21CS – Up to 30" Wide
VCI29CS – Up to 36" Wide
400 CFM Blower Included
6" Round
Vertical
2 Mesh
2 Bulbs
120V AC, 60Hz
28
Notes: Please refer to installation instructions. Installation instructions are available at www.thermador.com. Specifications are correct at the time of printing. Thermador reserves the right to change product specifications and design at any time, without notice.
DOWNDRAFT
Use Thermador Custom Hood Inserts within custom hood applications to create a seamless design with wall or island applications. These inserts efficiently and quietly remove odor and steam with easyto-access controls. Inserts are available for both professional and non-professional applications.
36-INCH DOWNDRAfT uCVM36fS SHOWN WITH INDuCTION
COOkTOP CIT365GM
29
DOWNDRAfT
MASTERPIECE SERIES DOWNDRAfT (30"/36")
UCVM30FS / UCVM36FS
PERfORMANCE
- Three fan speeds
- Filters are highly efficient at capturing grease
- Powerfully quiet ventilation systems
DESIGN
- Ideal for island and some wall applications
- Brushed stainless steel finish
- Easy to operate control buttons
CAPACITY
- Downdraft rises over 13 inches to capture steam from the tallest pots
- Choose from five blower options
- Blowers sold separately
- Downdraft recirculation possible with module RECIRC36DF
CONVENIENCE
- Dishwasher-safe full-face filters also act as a splatter shield
- Choose from Inline, Remote or Integrated Blowers
SPECIfICATIONS
Available Downdraft Widths
Blower
Duct Size at Discharge
Ducting Direction
Dishwasher-Safe Filters
Electrical
30", 36"
Sold Separately—
See Blower Options Table
6" Round
Down, Left or Right
Full-Face Mesh
120V AC, 60Hz bLOWER OPTIONS
See page 40 for further details.
REMOTE
Requires CV2T6 or CV2T10
Transition
VTR630D – 600 CFM Use RFPLT600 in roof-mount applications
VTR1030D – 1000 CFM
INLINE
Use RFPLT1000 in roof-mount applications
Requires CV2T6 or CV2T10
Transition
VTI610D – 600 CFM
VTI1010D – 1000 CFM
INTEGRATED
VTN600CV2C – 600 CFM
TRANSITION OPTIONS
See page 39 for further details.
CV2T6
CV2T10
Transition for 6" Ducting
Transition for 10" Ducting
REMOTE bLOWER ACCESSORIES
See page 39 for further details.
Roofplate – RFPLT600 Use with Remote Blower
VTR630D
Roofplate – RFPLT1000 Use with Remote Blower
VTR1030D
REMOTE bLOWER ACCESSORIES
See page 38 for further details.
Replacement Charcoal Filters
Sold Separately as a Service Item
(For use with Recirculation Module)
RECIRC36DF – Recirculation Kit
30
Notes: Please refer to installation instructions. Installation instructions are available at www.thermador.com. Specifications are correct at the time of printing. Thermador reserves the right to change product specifications and design at any time, without notice.
Product not intended for use with professional grade cooking products.
DOWNDRAfT
MASTERPIECE SERIES DOWNDRAfT (30"/36")
UCVM30FS / UCVM36FS
Notes: Please refer to installation instructions. Installation instructions are available at www.thermador.com. Specifications are correct at the time of printing. Thermador reserves the right to change product specifications and design at any time, without notice.
Product not intended for use with professional grade cooking products.
31
32
RANGE, RANGETOP AND VENTILATION MATRIX
PROfESSIONAL SERIES
= PERFECT FIT
= VIABLE OPTION
30-INCH
PRO GRAND
36-INCH
PRO GRAND
27-INCH DEPTH
48-INCH
PRO GRAND
30-INCH
PRO HARMONY
24-INCH DEPTH
27-INCH DEPTH
18-INCH TALL
WALL HOODS
30" PH30CS
36" PH36CS
42" PH42CS
48" PH48CS
54" PH54CS
24-INCH DEPTH
18-INCH TALL
WALL HOODS
30" PH30HS
36" PH36HS
48" PH48HS
24-INCH DEPTH
11-INCH TALL
WALL HOODS
30" HPWB30FS
36" HPWB36FS
48" HPWB48FS*
42" HPIN42HS
48" HPIN48HS
ISLAND HOODS
30" VCI230DS
36" VCI236DS
CUSTOM INSERTS †
48" VCI248DS
For optimal performance, the width of the hood should equal that of the cooktop or rangetop or exceed it by 3 inches on either side. Install these hoods only with Thermador Blowers.
*High heat tested to accommodate Pro Harmony™ or Pro Rangetop 18,000 burners and griddle.
†Pro Harmony ranges and PRO Rangetops require a 40-inch minimum distance to combustible materials.
36-INCH
PRO HARMONY
24-INCH DEPTH
48-INCH
PRO HARMONY
30-INCH
RANGETOP
36-INCH
RANGETOP
24-INCH DEPTH
48-INCH
RANGETOP
33
COOkTOP AND VENTILATION MATRIX
MASTERPIECE ® SERIES
34
= PERFECT FIT
= VIABLE OPTION
30-INCH
INDUCTION
36-INCH
INDUCTION
30-INCH
GAS COOKTOP
36-INCH
GAS COOKTOP
WALL HOODS
30" HMWN30FS
36" HMWN36FS
48" HMWN48FS
WALL HOODS
WITH BLOWER
30" HMWB30FS
36" HMWB36FS
36" HMCN36FS
CHIMNEY WALL HOODS
42" HMCN42FS
36" HMCB36FS
CHIMNEY WALL HOODS
WITH BLOWER
42" HMCB42FS
GLASS CANOPY HOOD
WITH BLOWER
36" HGEW36FS
36" HDDW36FS
DRAWER HOOD
WITH BLOWER
ISLAND HOODS
WITH BLOWER
40" HMIB40HS
42" HPIB42HS
48" HPIB48HS*
CUSTOM INSERTS
WITH BLOWER
21" VCI21CS
29" VCI29CS
30" UCVM30FS
DOWNDRAFTS
36" UCVM36FS
For optimal performance, the width of the hood should equal that of the cooktop or rangetop or exceed it by 3 inches on either side. Install these hoods only with Thermador Blowers.
*Compatible with cooktops of widths up to 42"
30-INCH
ELECTRIC COOKTOP
30-INCH
SENSOR ELECTRIC
COOKTOP
36-INCH
ELECTRIC COOKTOP
36-INCH
SENSOR ELECTRIC
COOKTOP
35
bLOWER SELECTION AND DuCT GuIDE
PROfESSIONAL SERIES
Type Model No.
Available
Sizes (Widths)
WALL
HOODS
ISLAND
HOODS
CUSTOM
INSERTS
MASTERPIECE ® SERIES
WALL
HOODS
PH_CS
HPWB_FS
PH_HS
HPIN_HS
VCI2_DS
HMWN_FS
HMWB_FS
HMCN_FS 36," 42"
CHIMNEY
WALL HOODS
ISLAND HOODS
CUSTOM INSERTS
DOWNDRAFT
HMCB_FS
HGEW36FS
HDDW36FS
HMIB40HS
HPIB_HS
VCI_CS
UCVM_FS
36," 42"
36"
36"
40"
42," 48"
21," 29"
30," 36"
36
*Purchase separately at most hardwares stores, unless otherwise indicated with a Thermador model number.
Type
30," 36," 42,"
48," 54"
30"
36," 48"
30," 36," 48"
42," 48"
30," 36," 48"
30"
36," 48"
30," 36"
Blower Information CFM
600
1000
1300
600
1000
600
600
1000
1300
600
1000
1200
600
1000
1300
600
1000
600
1000
600
1000
600
1000
1300
600
1000
600
•
•
•
•
•
•
•
•
•
•
•
•
Remote
•
•
Inline
•
•
•
•
•
400
600
600
1000
600
1000
1300
600
1000
600
600
600
400
600
1000
1300
600
1000
600
1000
600
1000
600
600
1000
600
1000
600
1200
600
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Integrated
•
•
Model No.
VTN630C
VTN1030C
VTR630D
VTR1030D
VTR1330E
VTI610D
VTI1010D
Included
Included
VTR630D
VTR1030D
VTR1330E
VTI610D
VTI1010D
VTN630C
VTN1030C
VTR630D
VTR1030D
VTR1330E
VTI610D
VTI1010D
VTI610D
VTR630D
VTR1030D
VTR1330E
VTI610D
VTI1010D
Max 10
Amps
5.8
5.2
7.8
9.5
5.8
7.6
10.2
4.3
7.8
9.2
5.8
7.6
4.8
5.0
9.2
5.8
7.6
3.4
4.8
5.0
4.3
7.8
•
4.4
6.7
6.7
10.2
5.8
7.6
4.9
4.9
5.2
5.2
9.2
5.8
7.6
4.9
3.4
5.0
6.7
7.8
7.8
9.2
5.8
7.6
7.6
4.6
8.8
4.3
4.6
4.3
7.8
5.8
VTR1330E
VTI610D
VTI1010D
Included
Included
Included
Included
Included
Included
VTN600CV2C
VTR630D
VTR1030D
VTI610D
VTI1010D
VTN600F
VTR630D
VTR1030D
VTI610D
VTI1010D
VTN600F
VTN1000F
VTR630D
VTR1030D
VTR1330E
VTI610D
VTI1010D
Included
VTN1080F
VTR630D
VTR1030D
Roofplate Required Duct Size at Blower
•
RFPLT600
•
•
RFPL
T1000
6-Inch
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8-Inch
•
•
•
•
•
•
•
•
•
10-Inch
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
• •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Transition with
Backdraft Damper
Duct Size at Discharge Discharge Direction
Hood Information
•
•
Included
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Required*
•
•
•
•
6-Inch
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
CV2T6
•
CV2T10
•
CV2T6
•
•
CV2T10
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
8-Inch
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
10-Inch
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Vertical
•
•
•
•
•
•
•
Horizontal
•
•
•
•
•
•
•
Side & Down culation
Recir
Capability
•
•
36" Only
•
•
•
•
•
•
•
•
•
37
38
WALL HOOD AND ISLAND HOOD ACCESSORIES
DuCT COVER
For use with PH__CS, PH__HS,
HPWB__FS, HMWN__FS & HMWB__FS
Width
30-Inch
36-Inch
42-Inch
48-Inch
6-Inch High 12-Inch High
DC30US
DC36US
N/A
DC48US
DCT30US
DCT36US
DCT42US
DCT48US
RECIRCuLATION kIT
• Stainless steel finish
• Perfect for hard to duct installations
• Use with 600 CFM blowers only
RECIRISL – Island Hood Recirculation Kit
For use with HMIB40HS & HPIB_HS
RECIRC_FS – Recirculation Kit
(30"/36") RECIRC30FS/RECIRC36FS
For use with HPWB30FS, HMWN__FS
(select models), & HMWB__FS
4"
30" , 36"
REMOTE CONTROL PANEL – PHREML
14 1 /
2
"
For use with PH__CS
• Stainless steel finish
• Cable-connected to blower and hood controls
4 3 /
8
"
• Cable length: 30 ft.
12" kEEP-HOT SHELf
For use with PH_CS & PH__HS
• Stainless steel finish
• Convenient shelf allows dishes to keep hot at serving temperature.
• Includes stainless steel backguard and two shelves.
30-Inch KHS30QS
36-Inch KHS36QS
42-Inch KHS42QS
48-Inch KHS48QS
CHIMNEY EXTENSION
Stainless steel chimney hood extension for up to 12-foot ceiling applications. Extension replaces upper section of standard chimney extension
CHIMxHMC
For use with
HMCN__FS &
HMCB__FS
CHIMxHGE
For use with
HGEW36FS
CHIMxHDD
For use with
HDDW36FS
REPLACEMENT CHARCOAL fILTERS
CHFILT3036
CHFILISL
For use with Recirculation Kit RECIRC_FS
For use with Recirculation Kit RECIRISL
LIGHTING
SKU
PH__CS
PH__HS
HPWB__FS
HMWN__FS
HMWB__FS
HMCN__FS
HMCB__FS
HGEW36FS
HDDW36FS
HPIN__HS
HPIB__HS
HMIB__HS
Included Bulb Type
Yes 12V, 20W Max., G-4 Base
Yes
No
No
No
12V, 20W Max., G-4 Base
120V, 50W Max., GU10 Base
120V, 50W Max., GU10 Base
120V, 50W Max., GU10 Base
Yes
Yes
Yes
Yes
Yes
Yes
Yes
12V, 20W Max., G-4 Base
12V, 20W Max., G-4 Base
12V, 20W Max., G-4 Base
12V, 20W Max., G-4 Base
12V, 20W Max., G-4 Base
12V, 20W Max., G-4 Base
12V, 20W Max., G-4 Base
CuSTOM INSERT ACCESSORIES
REMOTE CONTROL PANELS
VCI2REMFS For use with VCI2__DS
• Stainless steel finish
• Cable-connected to blower and hood controls
• Choose from one of two unique styles
• Cable length 30 ft.
CuSTOM HOOD LINERS
For use with VCI2__DS
• Stainless steel custom hood liners to protect the exterior base of custom insert
• Custom hood liner completes custom insert installation*
30-Inch LINER30
36-Inch LINER36
48-Inch LINER48
DOWNDRAfT ACCESSORIES
RECIRCuLATION kIT – RECIRC36Df
For use with UCVM__FS
Comes complete with 2 charcoal filters, 2 venting grids, and ducting to transition to integrated blower (blower sold separately)
For toe kick heights of 4" or taller
Wall or island applications
Easily mounts to integrated blower (VTN600CV2C) under cooktop
Toe kick/socket can be vented in any direction
Mounts to base of cabinet; recesses into toe kick
To be used only with Thermador Downdraft and Integrated Blower
Replacement filters are ordered as a service item
Filters should be replaced twice a year bAffLE fILTER
30-Inch BAFFLT30
36-Inch BAFFLT36
48-Inch BAFFLT48
For use with VCI2__DS
• Stainless steel finish
• Unique low profile design maximizes grease capture
• Dishwasher-safe for easy cleanup
REMOTE bLOWER ACCESSORIES
ROOfPLATE MATERIAL
For use with VTR630D, VTR1030D and VTR1330E
Combinations
Roofplate Remote Blower
RFPLT600 VTR630D
RFPLT1000 VTR1030D, VTR1330E
RFPLT600 RFPLT1000
TRANSITIONS
CV2T6
Transition piece required for installation of
600 CFM inline and remote blowers with 6" duct connections – downdraft applications only
CV2T10
Improves overall performance when installing with Thermador’s 1000 CFM Inline or Remote
Blowers with 10" duct connections – downdraft applications only
39
40 bLOWER OPTIONS
INTEGRAL (MOuNTED ON HOOD)
VTN600CV2C - 600 CFM
VTN1080F - 1000 CFM
VTN600F - 600 CFM
VTN1000F - 1200 CFM
8
1
/
4
"
VTN630C - 600 CFM
8 3 /
8
"
25"
VTN1030C - 1000 CFM
8 1 /
4
"
25"
REMOTE (MOuNTED TO ROOf OR EXTERNAL WALL)
VTR630D - 600 CFM VTR1030D - 1000 CFM VTR1330E - 1300 CFM
INLINE (MOuNTED bETWEEN kITCHEN AND EXTERNAL WALL)
VTI610D - 600 CFM VTI1010D - 1000 CFM
EquIVALENT DuCT LENGTHS fOR COMMONLY uSED TRANSITIONS
DUCT PIECE
Smooth Straight
SIZE OF DUCT
PIECE (IN.)
EQUIVALENT
LENGTH (FT.)
6 1.2
7
8
10
0.95
0.7
0.6
DUCT PIECE
3
1
/
4
" x 10" to
Round 90° Elbow
SIZE OF DUCT
PIECE (IN.)
EQUIVALENT
LENGTH (FT.)
6
7
10
5
3 1 /
4
" x 10" Center
Reverse Elbow Left
N/A 15
3
1
/
4
" x 10" Straight N/A 1
3
1
/
4
" x 10" Center
Reverse Elbow Right
N/A 25
3 1 /
4
" x 14" Straight
90° Elbow Round
45° Elbow Round
3 1 /
4
" x 10"
90° Elbow Round
3
1
/
4
" x 10"
45° Elbow Round
N/A
6
7
8
6
7
8
N/A
N/A
0.7
12
8
6
5
4
3
5
15
3 1 /
4
" x 10" Left
Reverse Elbow
3 1 /
4
" x 10" Right
Reverse Elbow
Round Wall Cap
Round Roof Cap
N/A
N/A
8
10
6
7
6
7
8
15
25
3 1 /
4
" x 10"
Flat Elbow
N/A 20
2' Long
3 1 /
4
" x 10" Flex
N/A 20
Round to
3
3 to Round
Round to
3
1
1
1
/
/
/
4
4
4
" x 10"
" x 10"
" x 10" 90° Elbow
6
7
6
7
6
7
1
1
5
3
10
8
3 to Round
7" Inline
Backdraft Damper
3 1
1
/
/
4
4
" x 10"
" x 10"
Roof Jack and Shutter
10
7
N/A
Note: These commonly used installation parts can be purchased at a local hardware store. Thermador does not manufacture all these parts.
1
2
2
2
2
2
2
2
41
fREquENTLY ASkED quESTIONS
42
WHAT ARE THE PRIMARY CONSIDERATIONS IN
CHOOSING A VENTILATION SYSTEM?
While every kitchen offers its unique set of constraints, the following is a list of basic questions one must ask before selecting a ventilation system:
1. Type of cooking surface (see page 8 for details)
2. BTU of heating surface (see page 8 for details)
3. Air volume or CFMs (see page 9 for details)
4. Duct run (see page 9 for details)
CAN I uSE A DOWNDRAfT WITH A SLIDE-IN RANGE?
Thermador Downdrafts cannot be used in combination with ranges or built-in ovens. The units must only be installed with drop-in cooking equipment.
CAN I RECIRCuLATE A DOWNDRAfT IN MY ISLAND?
Yes, Thermador was the first to introduce a recirculation module for downdrafts. The module comes complete with charcoal filters and socket grids to vent the toe-kick socket area. The downdraft recirculation module easily attaches to the integrated blower inside the cabinet (under the cooktop). This module works in island or wall applications with toe-kicks with heights of 4 inches or taller.
CAN I INSTALL AN EXTERNAL VENT fAN OR INLINE fAN TO bOOST THE PERfORMANCE Of MY HOOD
VENTILATION EquIPMENT?
Do not install inline or external fans to boost a hood that has its own power unit. In general, attempting that type of “boost” will not be effective. Also, most cooking ventilation products are designed with fan switches matched to the original motor amp ratings and would not support the increased amp draw from additional motor installations. This type of tampering voids the original manufacturer‘s warranty.
HOW CAN I GET ODORS OuT MORE quICkLY?
Similar to pre-heating your oven, switch on the hood a few minutes before you start cooking. This starts to circulate air in the kitchen, which will help remove the odors. Also, many Thermador Hoods feature a delayed shutoff function. The hood will tackle lingering odors and automatically turn off after 10 minutes.
HOW OfTEN SHOuLD I CLEAN MY fILTERS?
Thermador’s anodized aluminum mesh grease filters should be washed approximately every month depending on the amount of usage. Wash more often if your cooking style generates greater grease like frying foods or wok cooking.
Use hot, soapy water to clean filters. Thermador Filters are also dishwasher-safe.
Baffle filters, which are used in Thermador’s Wall Hoods, are designed to operate longer in high grease conditions without loss of performance. Generally, these need to be cleaned whenever the surfaces become unsightly.
WHAT TYPE Of DuCT IS bEST fOR VENTING A HOOD
OR DOWNDRAfT?
Hoods must be vented using metal duct. Given a choice between flexible metal duct and smooth metal duct, choose smooth duct.
The ridges found in flexible metal duct create turbulence and will diminish airflow. The larger the ducting, the less noise there will be and the better the rate of extraction.
HOW fAR CAN I RuN MY DuCTWORk TO EXHAuST
MY HOOD?
For maximum performance keep the duct straight and short. Use the shortest route with the fewest turns possible. 45° turns are better than 90° turns. Be sure to use an external roof or wall cap. When
10" round ducting is being used, Thermador recommends not exceeding 150 feet of duct. If in doubt, consult a qualified designer/ installer knowledgeable in ventilation.
I kEEP HEARING AbOuT “MAkEuP AIR”. WHAT IS THIS
AND HOW DOES IT APPLY TO MY HOOD?
When a ventilation fan operates, it draws air from inside the house to the outside, creating a slight vacuum within the house. This creates negative pressure, meaning the pressure inside the house is less than the pressure outside. If the negative pressure is strong enough, it can cause the furnace and other fuel-burning appliances to backdraft dangerous gases such as carbon monoxide into the home. All exhaust fans need an adequate supply of fresh air from the outside to operate safely. The air needed for this purpose is called “makeup air”.
Examine the fresh air/building codes that exist where you live.
Check with a local heating and ventilation expert to determine if your heating or air conditioning system makes allowances for additional “makeup air”. “Makeup” air can be introduced by simply opening a window or door.
WARRANTY
VENTILATION
PROfESSIONAL RANGES
PROfESSIONAL RANGETOPS
INDuCTION COOkTOPS
GAS COOkTOPS
ELECTRIC COOkTOPS
Full warranty parts and labor (1 year)
Full warranty parts and labor (1 year)
Full warranty parts and labor (1 year)
Full warranty parts and labor (1 year)
Full warranty parts and labor (1 year)
Full warranty parts and labor (1 year) full warranty and limited warranty from date of installation. for complete warranty details, refer to your Care & use manual, or ask your dealer.
Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write
Thermador indicating the model number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada. Thermador is not responsible for products that are transported from the U.S. for use in Canada.
Installation Notes:
1) Follow all National Electrical Code regulations. In addition, be aware of local codes and ordinances for makeup air requirements (if any) when installing your service.
2) Refer to the installation instructions shipped with each Thermador product for detailed specifications.
©2010 BSH Home Appliances Corporation. Litho date: 08/2010
1 8 0 0 7 3 5 4 3 2 8
U S A
W W W . T H E R M A D O R . C O M
5 5 5 1 M C F A D D E N A V E N U E
H U N T I N G T O N B E A C H , C A 9 2 6 4 9
C A N A D A
W W W . T H E R M A D O R . C A
5 8 0 0 E x P L O R E R D R I V E , S U I T E 3 1 0
M I S S I S S A U G A , O N T A R I O
L 4 W 5 K 9 , C A N A D A
© 2 0 1 0 B S H H O M E A P P L I A N C E S C O R P O R A T I O N . A L L R I G H T S R E S E R V E D .
Cert no. SCS-COC-001309
SAP# 2800001581
BSH#6510-0049 08/10 CW
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project