Cisco Systems Cordless Telephone 7960G User manual

Phone Guide
Cisco IP Phone 7960G and 7940G
for Cisco CallManager 4.1(3)
Including License and Warranty
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
Viewing and Dialing Calls
SoftKey Definitions
If you want to... Then...
AbbrDial
Redial the last
number
Press Redial.
Dial using a speed dial index
number
Answer
Answer a call
View your call
logs
Choose
> Missed
Calls, Received Calls, or
Placed Calls.
Barge
Add yourself to a call on a shared
line
CallBack
Dial from a call
log
Scroll to a listing from the
call log, edit the number (if
needed), and go off-hook.
Receive notification when a busy
extension becomes available
Cancel
Cancel an action or exit a screen
without applying changes
Edit a number
in a call log
Press EditDial followed by
<< or >> to reposition the
cursor or erase digits.
cBarge
Add yourself to a call on a shared
line and establish a conference
call
Dial from a
corporate
directory
Choose
>
Corporate Directory. Enter
the first few letters and
press Search. Then scroll to
a listing and go off-hook.
CFwdALL
Setup/cancel call forwarding
Clear
Delete records or settings
ConfList
View conference participants
Confrn
Create a conference call
Default
Restore settings (including
volume) to original factory
values
Delete
Remove characters to the right of
the cursor when using EditDial
Dial
Dial an entered phone number
DirTrfr
Transfer two calls to each other
EditDial
Edit a number in a call log
EndCall
Disconnect current call
Exit
Return to the previous screen
GPickUp
Answer a call on another
extension outside your group
Join
Join several calls on one line to
create a conference call
MeetMe
Host a Meet-Me conference call
Dial using the
speakerphone
Press New Call and enter a
number. Or, press
before or after dialing,
re-dialing or speed dialing a
number.
Place a call
while another
call is active
Press New Call. The
original call is placed on
hold automatically.
Quick Reference
Cisco IP Phone
7960G and 7940G
SoftKey Definitions
Button Definitions
Transferring a Call
Using Call Forward
Making Conference Calls
Viewing and Dialing Calls
Copyright © 2005 Cisco Systems, Inc. All rights reserved. Cisco, Cisco IOS,
Cisco Systems, and the Cisco Systems logo are registered trademarks of Cisco
Systems, Inc. or its affiliates in the U.S. and certain other countries. All other
brands, names, or trademarks mentioned in this document or Web site are the
property of their respective owners. The use of the word partner does not
imply a partnership relationship between Cisco and any other company.
(0501R)
OL-4637-03
More
Display additional softkeys
NewCall
Make a new call
Park
Store a call using Call Park
PickUp
Answer a call on another
extension in your group
Private
Allow/disallow others from
viewing or barging calls on a
shared line
QRT
Submit call problems to the
system administrator
Redial
Redial the most recently dialed
number
Remove
Remove a conference participant
Restore
Restore settings (including
volume) to previously saved
values
Resume
Resume a call on hold
RmLstC
Drop the last party added to
conference call
Save
Save the chosen settings
Search
Search for a directory listing
Select
Select an item on the screen
Trnsfer
Transfer a call
Update
Refresh content and get the latest
information
<<
Delete entered characters
>>
Move through entered characters
Button Definitions
i
or
Using Call Forward
Messages
If you want to...
Then...
Services
Set up call
forwarding for your
primary line
Press CFwdALL and
enter a target phone
number.
Set up or cancel call
forwarding from
your computer (for
any line)
Log in to your User
Options web page and
choose Forward all
calls... from the main
menu.
Cancel forwarding
Press CFwdALL.
Help
Directories
Settings
Speaker
Mute
Making Conference Calls
If you want to... Then...
Headset
Transferring a Call
If you want to...
Then...
Transfer a call
During a connected call,
press Transfer and enter
the target number. When
you hear the call ringing,
hang up or press Transfer
and hang up.
Transfer two
current calls to
each other
(“direct
transfer”)
Scroll to each target call on
the line and press Select.
From one of the selected
calls, press more > DirTrfr.
To stay on the line with
callers, use Join to create a
conference instead.
Start a standard
conference call
by calling
participants
During a connected call,
press more > Confrn to add
another party to the call.
Dial the participant’s
number. After connecting,
press Confrn again. Repeat
to add each participant.
Invite current
callers to join a
standard
conference
Scroll to each target call on
the line and press Select.
From a selected call, press
more > Join.
View a list of
participants
Choose an active conference
and press ConfList. An *
indicates the initiator.
Remove a
participant
from the
conference
If you are the conference
initiator, you can press
RmLstC or scroll to a name
in the conference list and
press Remove.
Contents
Getting Started 1
How to Use this Guide 1
Safety and Performance Information 2
Cleaning the Phone Screen 4
Where to Find Additional Information 4
More Information about Customizing Your Phone on the Web 4
Connecting Your Phone 5
An Overview of Your Phone 8
Buttons and Hardware 8
Phone Screen Features 11
Understanding Feature Functionality and Availability 12
Call-Handling and Navigation Tips 12
Going On-Hook and Off-Hook 12
Understanding Lines vs. Calls 12
Understanding Call Icons 13
Selecting Calls 13
Viewing Calls and Switching Between Calls 14
Choosing Phone Screen Items 15
Using Feature Menus 15
Entering and Editing Text 15
Getting Help on Your Phone 16
Understanding Button Icons 16
Basic Call Handling 17
Placing a Call 17
Answering a Call 20
Cisco IP Phone 7960G and 7940G
iii
Ending a Call 21
Using Hold and Resume 21
Using Mute 21
Transferring a Connected Call 22
Forwarding Your Calls to Another Number 23
Making Conference Calls 24
Types of Supported Conference Calls 24
Starting and Joining a Standard Conference 25
Starting or Joining a MeetMe Conference Call 26
Advanced Call Handling 27
Storing and Retrieving Parked Calls 27
Picking Up Redirected Calls on Your Phone 27
Using a Shared Line 29
Understanding Shared Lines 29
Adding Yourself to a Shared-Line Call 30
Preventing Others from Viewing or Barging a Shared-Line Call 31
Tracing Suspicious Calls 31
Making and Receiving Secure Calls 32
Prioritizing Critical Calls 33
Using a Handset, Headset, and Speakerphone 34
Obtaining a Headset 34
Using AutoAnswer with a Headset or the Speakerphone 35
Customizing Phone Settings 36
Adjusting the Volume 36
Customizing Rings and Message Indicators 37
Customizing the Phone Screen 37
Setting Up Speed Dial Features 38
Using Voice Messaging, Call Logs, and Directories 39
Accessing Voice Messages 39
Using Call Logs and Directories 40
iv
OL-4637-03
Accessing Your User Options Web Pages 41
Logging In to the User Options Web Pages 41
Subscribing to Phone Services 42
Understanding Additional Configuration Options 43
Troubleshooting Your Phone 45
Using the Quality Reporting Tool 45
Cisco One-Year Limited Hardware Warranty Terms 46
Index 49
Cisco IP Phone 7960G and 7940G
v
vi
OL-4637-03
Getting Started
How to Use this Guide
This guide provides you with an overview of the features available on your phone. You can read it
completely for a solid understanding of your phone’s capabilities, or refer to the table below for
pointers to commonly used sections.
If you want to...
Then
Explore your phone on your own
Press i or
Review safety information
See the “Safety and Performance Information” section on
page 2.
Connect your phone
See the “Connecting Your Phone” section on page 5.
on the phone when you need assistance.
Use your phone after it is installed Start with the “An Overview of Your Phone” section on page 8.
Learn about the display
See the “Phone Screen Features” section on page 11.
Select calls or switch between calls See the “Call-Handling and Navigation Tips” section on
page 12.
Make calls
See the “Placing a Call” section on page 17.
Put calls on hold
See the “Using Hold and Resume” section on page 21.
Mute calls
See the “Using Mute” section on page 21.
Transfer calls
See the “Transferring a Connected Call” section on page 22.
Make conference calls
See the “Making Conference Calls” section on page 24.
Share a phone number
See the “Using a Shared Line” section on page 29.
Use your phone as a speakerphone See the “Using a Handset, Headset, and Speakerphone” section
or switch between audio devices
on page 34.
Change volume levels or the ringer See the “Customizing Phone Settings” section on page 36.
sound
Set up speed dialing
See the “Setting Up Speed Dial Features” section on page 38.
View your missed calls
See the “Using Voice Messaging, Call Logs, and Directories”
section on page 39.
Cisco IP Phone 7960G and 7940G
1
Safety and Performance Information
Installing and Using Your Phone
Read the following safety notices before installing or using your Cisco IP Phone:
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury.
Before you work on any equipment, be aware of the hazards involved with electrical
circuitry and be familiar with standard practices for preventing accidents.
SAVE THESE INSTRUCTIONS
Warning
Read the installation instructions before you connect the system to its power source.
Warning
Ultimate disposal of this product should be handled according to all national laws and
regulations.
Warning
Do not work on the system or connect or disconnect cables during periods of lightning
activity.
Warning
To avoid electric shock, do not connect safety extra low voltage (SELV) circuits to
telephone network voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN
ports contain TNV circuits. Some LAN and WAN ports use RJ-45 connectors. Use caution
when connecting cables.
Caution
Inline power circuits provide current through the communication cable. Use the Cisco
provided cable or a minimum 24 AWG communication cable.
Warning
The power supply must be placed indoors.
2
OL-4637-03
Getting Started
Using an External Power Supply
The following warnings apply when you use the external power supply with the Cisco IP Phone:
Warning
This product relies on the building's installation for short-circuit (over current)
protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC,
10A international) is used on the phase conductors (all current-carrying conductors).
Warning
The device is designed to work with TN power systems.
Warning
The plug-socket combination must be accessible at all times because it serves as the
main disconnecting device.
Caution
Only use the Cisco specified power supply with this product.
Using External Devices with Your Cisco IP Phone
The following information applies when you use external devices with the Cisco IP Phone:
Cisco recommends the use of good quality external devices (speakers, microphones, and headsets) that
are shielded against unwanted radio frequency (RF) and audio frequency (AF) signals.
Depending on the quality of these devices and their proximity to other devices such as mobile phones
or two-way radios, some audio noise may still occur. In these cases, Cisco recommends that you take
one or more of the following actions:
• Move the external device away from the source of the RF or AF signals.
• Route the external device cables away from the source of the RF or AF signals.
• Use shielded cables for the external device, or use cables with a better shield and connector.
• Shorten the length of the external device cable.
• Apply ferrites or other such devices on the cables for the external device.
Cisco cannot guarantee the performance of the system because Cisco has no control over the quality
of external devices, cables, and connectors. The system will perform adequately when suitable devices
are attached using good quality cables and connectors.
Caution
In European Union countries, use only external speakers, microphones, and headsets that
are fully compliant with the EMC Directive [89/336/EC].
Cisco IP Phone 7960G and 7940G
3
Cleaning the Phone Screen
Gently wipe the phone screen with a soft, dry cloth. Do not use any liquids or powders on the phone.
Using anything other than a soft, dry cloth can contaminate phone components and cause failures.
Where to Find Additional Information
You can access the most current Cisco documentation on the World Wide Web at this URL:
http://www.cisco.com/univercd/home/home.htm
You can access the Cisco website at this URL:
http://www.cisco.com/
International Cisco websites can be accessed from this URL:
http://www.cisco.com/public/countries_languages.shtml
More Information about Customizing Your Phone on the Web
Your Cisco IP Phone is a network device that can share information with other network devices in your
company, including your computer. You can use your Cisco CallManager User Options web pages to
establish and customize phone services and to control phone features and settings from your computer.
This guide provides a brief overview of these capabilities. For complete instructions, refer to
Customizing Your Cisco IP Phone on the Web at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm
4
OL-4637-03
Connecting Your Phone
Connecting Your Phone
Your system administrator will likely connect your new Cisco IP Phone to the corporate IP telephony
network. If that is not the case, refer to the graphic and table below to connect your phone.
8
1
AUX
10/100 SW
10/100 PC
+
DC48V
7
2
3
4
5
113656
6
1
DC adaptor port (DC48V) for phones not
provided with inline power
5
Access port (10/100 PC) for connecting
your phone to your computer
2
AC-to-DC power supply
6
Handset port
3
AC power cord
7
Headset port
4
Network port (10/100 SW) for connecting to the
network
8
Footstand button
Cisco IP Phone 7960G and 7940G
5
Adjusting the Footstand
To change the angle that your phone sits on your desktop, adjust the footstand while pressing the
footstand button.
Adjusting the Handset Rest
When you connect your phone, you might want to adjust the handset rest to ensure that the receiver
will not slip out of the cradle. See the table below for instructions.
2
3
120521
1
1
Set the handset aside and pull the square plastic tab from the handset rest.
2
Rotate the tab 180 degrees.
3
Slide the tab back into the handset rest. An extension protrudes from the top of the rotated tab.
Return the handset to the handset rest.
Registering with TAPS
After your phone is connected to the network, your system administrator might ask you to
auto-register your phone using TAPS (Tool for Auto-Registered Phones Support). TAPS might be used
for a new phone or to replace an existing phone.
To register with TAPS, pick up the handset, enter the TAPS extension provided by your system
administrator, and follow the voice prompts. You might need to enter your entire extension, including
the area code. After your phone displays a confirmation message, hang up. The phone will re-start.
Headset Information
To use a headset, connect it to the headset port on the back of your phone.
Although Cisco Systems performs some internal testing of third-party headsets for use with the
Cisco IP Phones, Cisco does not certify or support products from headset or handset vendors. Because
of the inherent environmental and hardware inconsistencies in the locations where Cisco IP Phones are
6
OL-4637-03
Connecting Your Phone
deployed, there is not a single “best” solution that is optimal for all environments. Cisco recommends
that customers test the headsets that work best in their environment before deploying a large number
of units in their network.
In some instances, the mechanics or electronics of various headsets can cause remote parties to hear
an echo of their own voice when they speak to Cisco IP Phone users.
Cisco Systems recommends the use of good quality external devices, like headsets that are screened
against unwanted radio frequency (RF) and audio frequency (AF) signals. Depending on the quality of
these devices and their proximity to other devices such as cell phones and two-way radios, some audio
noise may still occur. See the “Using External Devices with Your Cisco IP Phone” section on page 3
for more information.
The primary reason that a particular headset would be inappropriate for the Cisco IP Phone is the
potential for an audible hum. This hum can be heard by either the remote party or by both the remote
party and you, the Cisco IP Phone user. Some potential humming or buzzing sounds can be caused by
a range of outside sources, for example, electric lights, being near electric motors, large PC monitors.
In some cases, a hum experienced by a user may be reduced or eliminated by using a local power cube
(CP-PWR-CUBE-2). See the “Using an External Power Supply” section on page 3 for more
information.
Subjective to the User
Beyond the physical, mechanical and technical performance, the audio portion of a headset must
sound good to you (the user) and to the party on the far end. Sound is subjective and Cisco cannot
guarantee the performance of any headsets or handsets, but some of the headsets and handsets on the
sites listed below have been reported to perform well on Cisco IP Phones.
Nevertheless, it is ultimately still the customer's responsibility to test this equipment in their own
environment to determine suitable performance.
For information about headsets, see:
http://vxicorp.com/cisco
http://plantronics.com
Cisco IP Phone 7960G and 7940G
7
An Overview of Your Phone
The Cisco IP Phone 7960G or 7940G is a full-feature telephone that provides voice communication
over the same data network that your computer uses, allowing you to place and receive phone calls,
put calls on hold, speed dial numbers, transfer calls, make conference calls, and so on.
In addition to basic call-handling features, your phone supports specialized or advanced telephony
features that can extend and customize your call-handling capabilities.
Your Cisco IP Phone also provides you with:
• Access to network data and services—You can access specialized web-based services from your
phone
• Online control from your User Options web pages—You can customize your phone’s features
using a web browser on your computer
• An online help system—You can obtain information about features, buttons, softkeys, and menu
items directly from your phone
Buttons and Hardware
Some of the hardware features on your Cisco IP Phone include:
• Buttons for speakerphone mode and headset mode
• Four softkey buttons for access to telephony features
• Four feature buttons for access to messages, directories, services, and settings
• Programmable buttons for phone lines, features, speed-dial numbers, and services
• A help button for on-the-spot information
Refer to the following illustrations and table for details.
8
OL-4637-03
An Overview of Your Phone
Figure 1
Cisco IP Phone 7960
2
3
4
1
5
6
7
8
68561
9
17 16 15 14 13 12 11 10
Figure 2
Cisco IP Phone 7940
2
3
4
1
5
6
7
8
17 16 15 14 13 12 11 10
68562
9
1
Handset light strip Indicates an incoming call or new voice message.
2
Phone screen
Shows phone features. See the “Phone Screen Features” section on page 11.
Cisco IP Phone 7960G and 7940G
9
3
Model type
Indicates your Cisco IP Phone model.
4
Programmable
buttons
Depending on configuration, programmable buttons provide access to:
• Phone lines (line buttons)
• Speed-dial numbers (speed-dial buttons)
• Web-based services (for example, a Personal Address Book button)
• Phone features (for example, a Privacy button)
5
Footstand button
Allows you to adjust the angle of the phone base.
6
Directories button Opens/closes the Directories menu. Use it to access call logs and corporate
directories. See the “Using Call Logs and Directories” section on page 40.
7
Help button
i or
Activates the Help menu. See the “Getting Help on Your Phone” section on
page 16.
8
Settings button
Opens/closes the Settings menu. Use it to control phone screen contrast and
ring sounds. See the “Customizing Phone Settings” section on page 36.
9
Speaker button
Toggles the speakerphone on or off.
10 Mute button
Toggles the Mute feature on or off.
11 Headset button
Toggles the headset on or off.
12 Volume button
Controls the volume and other settings. See the “Customizing Phone
Settings” section on page 36.
13 Services button
Opens/closes the Services menu. See the “Accessing Your User Options Web
Pages” section on page 41.
14 Messages button
Typically auto-dials your voice message service (varies by service). See the
“Accessing Voice Messages” section on page 39.
15 Navigation button Allows you to scroll through menus and highlight items. Use in conjunction
with softkeys to activate highlighted items.
16 Keypad
Allows you to dial phone numbers, enter letters, and choose menu items.
17 Softkey buttons
Each activates a softkey option (displayed on your phone screen).
10
OL-4637-03
An Overview of Your Phone
Phone Screen Features
This is what your main phone screen might look like with an active call. The table below provides a
basic overview of phone screen features.
1
Primary phone Displays the phone number (extension number) for your primary phone line.
line
2
Programmable Indicate the configuration for programmable buttons
on your phone:
button labels
Phone lines—Each corresponds to a line button. You might have one
line or multiple lines assigned to your phone.
Speed-dial numbers—Each corresponds to a speed-dial button. See
“Setting Up Speed Dial Features” section on page 38 for details.
Phone services—Each corresponds to a web-based phone service. (For
example, a Personal Address Book button).
Phone feature—Each corresponds to a specific feature. (For example,
a Privacy button.)
3
Softkey labels
Each displays a softkey function. Activate a softkey by pressing
corresponding softkey button).
4
Status line
Displays audio mode icons, status information, and prompts.
5
Call activity
area
Displays current calls for the highlighted line and includes detailed information
such as caller ID, call duration, and call state. (In the illustration above, line
“6060” is highlighted.) See the “Viewing Calls and Switching Between Calls”
section on page 14 for related information.
Cisco IP Phone 7960G and 7940G
(the
11
Understanding Feature Functionality and Availability
The operation of your Cisco IP Phone and the features available to you may vary, depending on the
call processing agent used by your company and also on how your company’s phone support team has
configured your phone system. Therefore, some of the features included in this Phone Guide might not
be available to you or might work differently on your phone system. Contact your support desk or
system administrator if you have questions about feature operation or availability.
Call-Handling and Navigation Tips
These guidelines can help you handle calls and navigate menus on your Cisco IP Phone.
Going On-Hook and Off-Hook
Some phone tasks and instructions differ depending on whether the phone is on-hook or off-hook.
• On-Hook—The phone handset is resting in the cradle, no calls are active, and you do not have an
active dial tone. Your phone provides on-hook dialing, which enables you to enter or choose
phone numbers before activating the call. When your phone is on-hook, this icon appears next to
each phone line:
• Off-Hook—The phone handset is lifted from the cradle, the speakerphone is active, or any of
several other methods are used to get a dial tone or to answer an incoming call. When your phone
is off-hook, this icon appears next to the appropriate phone line:
Understanding Lines vs. Calls
It is sometimes easy to confuse lines and calls on your phone. Use these tips to avoid confusion:
Lines
The Cisco IP Phone 7960G supports up to six lines and the Cisco IP Phone 7940G supports up to two
lines. The number of lines available on your phone depends on how your system administrator has
configured your phone’s programmable buttons. To see how many lines you have, look at the line area
of your phone screen. You have as many lines as you have phone numbers.
Calls
Each line can support multiple calls. Therefore, you might find yourself handling several calls on one
phone line. The default configuration is four calls per line, but your system administrator can adjust
this number according to your needs. Regardless of the number of lines, your phone supports a
maximum of 200 calls at a time.
12
OL-4637-03
An Overview of Your Phone
Understanding Call Icons
Your phone displays icons to help you determine the call state (whether the call is on hold, ringing,
connected, and so on). Call state icons appear in the call activity area next to specific calls.
Icon
Call State
Description
Connected call You are currently connected to the other party. Many phone features
require that you have a connected call.
Incoming call,
ringing
An incoming call is ringing on one of your lines. See the “Answering a
Call” section on page 20 for details.
Outgoing call,
ringing
An outgoing call is ringing on the other party’s line. See the “Placing a
Call” section on page 17 for details.
Call on hold
You have put this call on hold. (When displayed next to a phone line, this
icon indicates that all calls on the line are on hold.)
Outgoing call,
busy line
The outgoing call that you placed has reached a busy line.
Remote-in-use
Another phone that shares your line has a connected call. See the “Using
a Shared Line” section on page 29 for details.
Authenticated
call
See the “Making and Receiving Secure Calls” section on page 32 for a
description of this icon.
Encrypted call
See the “Making and Receiving Secure Calls” section on page 32 for a
description of this icon.
Selecting Calls
Many phone features require that you select the calls you want to use with a particular feature. For
example, if you have four held calls, but only want to join two of them to a conference call, you can
select the calls that you want to add to the conference before activating the feature.
If you want to...
Then...
Highlight a call
Use the Navigation button to scroll through the call list. Highlighted calls
appear slightly darker than other calls.
Select a call
Highlight a connected or held call and press Select. Selected calls are
indicated with a
next to them.
Verify selected calls
Use the Navigation button to scroll through the list of calls. Selected calls are
indicated with a
and are grouped together in the call list.
Cisco IP Phone 7960G and 7940G
13
Viewing Calls and Switching Between Calls
These tips can help you switch between calls on one or more lines. If the call you want to switch to is
not automatically highlighted, use the Navigation button to scroll to it.
If you want to...
Then...
Switch between calls on Highlight the call you are switching to and press Resume. The other call is
one line
placed on hold automatically.
Switch from a
connected call to
answer a ringing call
Press Answer or press
for the line with the incoming call. Doing so
automatically places the first call on hold.
Switch between calls on Press
for a line that has a call on hold. (The line displays the
.) If there is a single call holding on the line, it will
different lines
call-on-hold icon
resume automatically. If there are multiple calls holding on the line, scroll
to the specific call (if necessary) and press Resume.
See all calls on a
specific line
Press i or
, then immediately press the line button. Doing so shows
call details but will not impact the call state; it is therefore useful if you are
talking on one line and want to view held calls on another line.
See an overview of line
activity (one call per
line)
Press
for the highlighted line. (A line appears highlighted when the calls
associated with it are displayed on the phone screen.)
Doing so prompts the phone to switch to call overview mode and display
one call per line. This call is either the active call or, if all calls are on hold,
the held call with the longest duration.
To return to the standard view, press i or
line button.
, then immediately press the
Tips
• Only one call can be active; other calls will be placed on hold automatically.
• When you have multiple calls on one line, calls with the highest precedence and longest duration
display at the top of the call list. See the “Prioritizing Critical Calls” section on page 33.
• Calls of a similar type are grouped together in the call list. For example, calls that you have
interacted with are grouped near the top, selected calls are grouped next, and calls that you have
not yet answered are grouped last.
14
OL-4637-03
An Overview of Your Phone
Choosing Phone Screen Items
To choose an item on
the phone screen...
Do this...
By scrolling
Press the Navigation button to highlight an item in a list. Press a relevant
softkey such as Select or Dial to finish the action.
By item number
Press the corresponding number on your keypad. For example, press 4 to
choose the fourth item in a menu.
Using Feature Menus
If you want to...
Then...
Open or close a feature
menu
Press a feature button:
Messages
Services
Directories
Settings
i or
Help
Scroll through a list or
menu
Press the Navigation button.
Go back one level in a
feature menu
Press Exit. (Note that if you press Exit from the top-level of a menu, the
menu will close.)
Entering and Editing Text
If you want to...
Then...
Enter a letter on your
phone screen
Press the appropriate keypad number one or more times to select a letter
(with or without capitalization) from the pop-up menu. When you pause,
the cursor automatically advances to allow you to enter the next letter.
Delete within an entry or
move your cursor
Press << or Delete to remove a letter or digit. Press >> to move the cursor
to the right.
Cisco IP Phone 7960G and 7940G
15
Getting Help on Your Phone
Your Cisco IP Phone provides on-the-spot help with specific buttons and features. Help topics appear
on the phone screen. See the table below for details.
If you want to...
Then...
Learn about a button or Press i or
softkey
once then immediately press a button or softkey.
Learn about a menu
item
Press
,
, or
to display a feature menu.
Highlight a menu item, then press i or
twice quickly.
Get help using Help
Press i or
twice quickly (without first selecting a menu item).
View network statistics
for an active call
Press i or
twice quickly during an active call.
Understanding Button Icons
Your phone might have words printed on some buttons instead of icons. However, this Phone Guide
uses images of buttons with icons. For a description of button icons used in this book, see the “Buttons
and Hardware” section on page 8, or refer to the “Button Definitions” section of the Quick Reference
tear-out card at the front of this book.
16
OL-4637-03
Basic Call Handling
Basic Call Handling
This section covers basic call-handling tasks such as placing, answering, and transferring calls. The
features you use to perform these tasks are standard and available on most phone systems.
Placing a Call
To place a call, pick up the handset and dial. Or use one of the other options outlined in the table
below.
If you want to...
Then...
Dial on-hook (no dial Enter a phone number and do one of the following actions to go off-hook:
tone)
• Lift the handset
• Press
or
• Press Dial
• Press
Dial using the
speakerphone
(a line button)
Press New Call and enter a phone number. Or, you can press
after dialing, re-dialing or speed dialing a number.
before or
Many of the actions that you can take to dial will automatically trigger
speakerphone mode, if the handset is in its cradle and
is not lit. These
actions include pressing Redial or a speed dial button.
Redial the most
recently dialed
number
Press Redial. By default, Redial uses your primary line. However, you can
open a secondary line and then press Redial. To open a line, press
.
Speed dial a number
Do one of the following:
• Press
(a speed-dial button) before or after going off-hook.
• Enter a speed dial index number (1-99 on the keypad) while on-hook and
press AbbrDial.
For details, see the “Setting Up Speed Dial Features” section on page 38.
Place a call when
another call is active
(using a new line)
Press
Place a call when
another call is active
(using the same line)
Press Hold, next press New Call, then dial, re-dial, or speed dial a number.
Or, continue to talk on the active call while preparing to dial from a call log
or corporate directory. (See the next two rows in this table for details.)
Cisco IP Phone 7960G and 7940G
for the new line. Doing so automatically places the first call on hold.
17
If you want to...
Then...
Dial from a call log
Choose
> Missed Calls, Received Calls, or Placed Calls, then scroll
to a listing and go off-hook. To add a prefix or other digits, press EditDial.
If you want to dial from a call log while on an active call, scroll to a listing
and press Dial. Then choose a softkey to handle the original call:
• Hold—Puts the first call on hold and dials the second.
• EndCall—Disconnects the first call and dials the second.
• Transf—Transfers the first party to the second. (Press Transf twice.)
• Confrn—Creates a conference call with all parties. (Press Confrn twice.)
Dial from a corporate Choose
> Corporate Directory (name can vary). Use your keypad to
directory on the
enter letters, then press Search. To dial, scroll to a listing and go off-hook.
phone
If you want to dial from a directory while on an active call, scroll to a listing
and press Dial. Then choose a softkey to handle the original call:
• Hold—Puts the first call on hold and dials the second.
• EndCall—Disconnects the first call and dials the second.
• Transf—Transfers the first party to the second. (Press Transf twice.)
• Confrn—Creates a conference call with all parties. (Press Confrn twice.)
Dial from a corporate Use the Cisco WebDialer feature. Open a web browser and go to your
directory web page
company directory. Click on a phone number in the directory. Click Dial to
place the call. Click Hangup to end the call. See the Customizing Your
Cisco IP Phone on the Web guide for more details:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm
Dial using a headset
Do one of the following:
• If
is unlit, press it before or after dialing, re-dialing, or speed-dialing
a number.
• If
is lit, press New Call, Redial, or
(a line button or speed dial
button). Or, enter a phone number and press Dial.
Receive notification
when a busy or
ringing extension
becomes available
Call the number and press CallBack while listening to the busy tone or ring
sound. Hang up. When the extension becomes available, your phone will
provide you with an audio and visual alert. (The callback to this number is
not automatic; you must place the call.) CallBack is a special feature that
your system administrator might configure for your phone. Note that
CallBack will fail if the other party has call forwarding enabled.
Make a priority
(precedence) call
Enter the MLPP access number (provided by your system administrator)
followed by the phone number. For more details, see the “Prioritizing Critical
Calls” section on page 33.
18
OL-4637-03
Basic Call Handling
If you want to...
Then...
Dial from a Personal
Address Book (PAB)
entry or Fast Dial
code
Choose
> PAB service or Fast Dial service (exact names might vary).
To dial from a listing, scroll to it and go off-hook. For help subscribing to the
PAB or Fast Dial service, see the “Accessing Your User Options Web Pages”
section on page 41.
Place a call using a
billing or tracking
code
Dial a number and enter a client matter code (CMC) or a forced
authorization code (FAC) when prompted by a distinctive tone. Your system
administrator will tell you if you need to enter CMC or FAC codes and can
provide you with detailed instructions.
Place a call using
Make sure that you are logged in to Extension Mobility (EM) on the phone
your Cisco Extension that you are trying to use. Choose
> EM Service (exact name might
Mobility profile
vary). Then use your keypad to enter login information. If you are using a
phone in a shared workspace, you might need to log in to EM before you can
access certain features or complete a call.
EM is a special feature that your system administrator can assign to phones
and phone users. Refer to Customizing Your Cisco IP Phone on the Web:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm
Make a video call
Check the phone screen display for this icon:
If the icon is present, your phone is video-enabled and can support
Cisco VT Advantage. This enables you to make video calls using your
Cisco IP Phone, your personal computer, and an external video camera.
Contact your system administrator for assistance and refer to Cisco VT
Advantage Quick Start Guide and Cisco VT Advantage User Guide:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm
Tips
• If you make a mistake while entering a phone number, press << to erase one or more digits. Press
Cancel to exit the dialing attempt.
• If you are dialing with the phone on-hook, you cannot use * or # as the leading digit. If you need
to use these keys, dial with the phone off-hook.
• If you cannot hear a dial tone or complete a phone call, one or more of the following factors might
apply. If necessary, ask your system administration for more information.
– You need to log into the Extension Mobility service from the
button on your phone.
– You need to enter a client matter code or forced authorization code after dialing a number.
– Your phone has time-of-day restrictions that prevent you from using some features during
certain hours of the day.
Cisco IP Phone 7960G and 7940G
19
Answering a Call
To answer a call, go-off hook by picking up the handset. Or see the table below for more options.
If you want to...
Then...
Answer with a headset
Press
, if unlit.
Or, if
is already lit, press Answer or
incoming call).
, Answer, or
(the line button for the
Answer with the speakerphone
Press
(the line button for the incoming call).
Switch from a connected call to
answer a ringing call
Press Answer or
(the line button for the incoming call). Doing
so answers the new call and automatically places the first call on
hold. See the “Using Hold and Resume” section on page 21 for
more information.
Answer a call using call waiting Ask your system administrator to set up the Call Waiting feature
for your phone.
When this feature is enabled, you will hear a call waiting tone and
see caller ID information if a new call comes in while you are on
another call. To answer the call, press Answer. To return to the
original call, you must put this call on hold. See the “Using Hold
and Resume” section on page 21.
Automatically connect an
Ask your system administrator to set up the AutoAnswer feature.
incoming call after a ring or two For more information, see the “Using AutoAnswer with a Headset
or the Speakerphone” section on page 35.
Retrieve, or allow someone else
to retrieve, a held call on
another phone (such as a phone
in a conference room)
Use Call Park. See the “Storing and Retrieving Parked Calls”
section on page 27.
Use your phone to answer a call Use Call Pickup. See the “Using a Shared Line” section on page 29.
that is ringing on another phone
Answer a priority call
Hang up the current call and press Answer. See the “Prioritizing
Critical Calls” section on page 33.
Send an incoming call directly to Press iDivert. The call is automatically transferred to your voice
the voice messaging system
message greeting.
20
OL-4637-03
Basic Call Handling
Ending a Call
To end a call, hang up. See the table below for details.
If you want to...
Then...
Hang up while using the handset
Return the handset to its cradle or press EndCall.
Hang up while using the headset
Press
. If you want to keep headset mode activated (keep
the button lit after hanging up), press EndCall.
Hang up while using the speakerphone Press
Hang up one call but preserve another
call on the same line
or EndCall.
Press EndCall. If necessary, remove the call from hold first.
Using Hold and Resume
Only one call can be active at any given time; all other calls must be placed on hold.
If you...
Then...
Want to put a call on hold
Make sure the call you want to put on hold is highlighted and press
Hold.
Want to remove a call from
hold on the current line
Scroll to the specific call (if necessary) and press Resume.
Want to remove a call from
hold on a different line
Press
for the line that has the held call. (The line displays the
.) If there is a single call holding on this line, the
call-on-hold icon
call will resume automatically. If there are multiple calls holding on
the line, scroll to the specific call (if necessary) and press Resume.
Tip
Engaging the Hold feature typically generates music or a beeping tone. For this reason, avoid putting
a conference call on hold.
Using Mute
Mute disables the audio input for your handset, headset, speakerphone, and external microphone.
With Mute enabled, you can hear other parties on a call but they cannot hear you.
If you want to...
Then...
Toggle Mute on
Press
.
Toggle Mute off
Press
.
Cisco IP Phone 7960G and 7940G
21
Transferring a Connected Call
Transfer redirects a connected call. The target is the number to which you want to transfer the call.
If you want to...
Then...
Transfer a call without
talking to the transfer
recipient
Press Transfer and enter the target number. When you hear the call
ringing, hang up.
If your system administrator did not enable on-hook transfer, you must
press Transfer again to complete the transfer. To cancel the transfer,
press EndCall.
Talk to the transfer
Press Transfer and enter the target number. Wait for the transfer
recipient before transferring recipient to answer. If the recipient accepts the transferred call, press
a call (consult transfer)
Transfer again. If the recipient refuses the call, press Resume to return
to the original call.
If your system administrator did not enable on-hook transfer, you must
press Transfer again to complete the transfer. To cancel the transfer,
press EndCall.
Transfer two current calls
to each other (direct
transfer)
Scroll to highlight any call on the line and press Select. Repeat this
process for the second call. With one of the selected calls highlighted,
press DirTrfr. (You might need to press more to see DirTrfr.) The two
calls connect to each other and drop you from the call.
If you want to stay on the line with the callers, use Join to create a
conference instead. For details, see the “Making Conference Calls”
section on page 24.
Tips
• When on-hook transfer is enabled, you can either hang up or press Transfer, then hang up.
• If on-hook transfer is not enabled on your phone, be aware that hanging up instead of pressing
Transfer cancels the transfer action and places the party to be transferred on hold.
• You cannot use Transfer to redirect a call on hold. Press Transfer to remove the call from hold
before transferring it.
22
OL-4637-03
Basic Call Handling
Forwarding Your Calls to Another Number
You can use Call Forward All to redirect your incoming calls from your Cisco IP Phone to another
number.
Note
Enter the Call Forward All target number exactly as you would dial it from your desk phone.
For example, enter an access code such as 9 or the area code, if necessary.
If you want to...
Then...
Set up call forwarding on your Press CFwdALL and enter a target phone number.
primary line
Cancel call forwarding on
your primary line
Press CFwdALL.
Verify that call forwarding is
enabled on your primary line
Look for this icon above the primary line:
. Also, check the status
line near the bottom of the phone screen; it displays the call
forwarding target number.
Set up or cancel call
forwarding for any line
Log in to your User Options web pages, choose your device, then
choose Forward all calls... from the main menu. You can set up or
cancel call forwarding for each line on your phone. See the “Logging
In to the User Options Web Pages” section on page 41 for login
instructions.
When call forwarding is enabled for any line other than the primary
line, your phone does not provide you with any confirmation that
calls are being forwarded. Instead, you must confirm your settings in
the User Options pages.
Tips
• You can forward your calls to a traditional analog phone or to another IP phone (although your
system administrator might restrict the call forwarding feature to numbers within your company).
• You must configure this feature per line; if a call reaches you on a line where call forwarding is
not enabled, the call will ring as usual.
Cisco IP Phone 7960G and 7940G
23
Making Conference Calls
Your Cisco IP Phone allows you to join three or more people into one telephone conversation, creating
a conference call.
Types of Supported Conference Calls
There are two types of conference calls: Standard and MeetMe.
Standard Conference Calls
In standard (or “ad hoc”) conference calls, the conference organizer must call participants to add them
to the conference. Using your Cisco IP Phone, you can create standard conference calls in different
ways, depending on your needs and your phone’s configuration:
• Confrn—Use this softkey to establish a standard conference by calling each participant. Standard
conference calling is a default feature available on most phones.
• Join—Use this softkey to establish a standard conference among several calls already on one line.
• cBarge—Use this softkey to add yourself to an existing call on a shared line and to turn the call
into a standard conference call. This is an optional feature available only for shared lines, and your
system administrator must configure it for you. See the “Using a Shared Line” section on page 29
for details.
See the “Starting and Joining a Standard Conference” section on page 25 for additional instructions.
MeetMe Conference Calls
MeetMe conferencing allows participants to join a conference by calling the conference number
directly, rather than waiting for the conference initiator to call them.
To start a MeetMe conference, use the MeetMe softkey on your phone, then dial the MeetMe phone
number provided to you by your system administrator. To participate in a MeetMe conference, dial
the MeetMe phone number at a specified time. Conference participants hear a busy tone if they call
into the conference before the conference initiator has dialed in. Once the conference initiator has
dialed in, the MeetMe conference is established and can continue even if the conference initiator
disconnects. Note that MeetMe conferencing is a special feature that your system administrator must
configure for you.
See the “Starting or Joining a MeetMe Conference Call” section on page 26 for additional instructions.
24
OL-4637-03
Basic Call Handling
Starting and Joining a Standard Conference
A standard conference allows at least three people to participate in a single call. See the table below
for details.
If you want to...
Then...
Start a standard conference
call by calling participants
During a connected call, press Confrn to add another party to the
call. (You may need to press the more softkey to see Confrn.) Enter
the conference participant’s phone number. After the call connects
and you have spoken to the conference participant, press Confrn
again to add this party to your call. Repeat to add additional
participants.
Invite current callers to join a
standard conference
With two or more calls on a single line, scroll to highlight any call
on the line and press Select. Repeat this process for each call you
want to add to the conference. From one of the selected calls, press
Join. (You may need to press the more softkey to see Join.) Note that
the active call is selected and added to the conference automatically.
Participate in a standard
conference
Answer the phone when it rings. You do not need to do anything
special to participate in a standard conference call.
Barge (add yourself to) a call
on a shared line and turn the
call into a standard
conference call
Highlight a remote-in-use call on a shared line and press cBarge.
(You may need to press the more softkey to display cBarge.) Other
parties on the call will hear a barge tone. See the “Using a Shared
Line” section on page 29 for details.
View a list of conference
participants
Highlight an active conference, and press ConfList. Participants are
listed in the order in which they join the conference with the most
recent additions at the top.
Get an updated list of
conference participants
While viewing the conference list, press Update.
See who started the
conference
While viewing the conference list, locate the person listed at the
bottom of the list with an asterisk (*) next to the name.
Drop the last party added to
the conference
Highlight the participant’s name at the top of the conference list and
press Remove. (The last participant is always listed at the top of the
list.) Or, when not viewing the conference list, press RmLstC. You
can remove participants only if you initiated the conference call.
Cisco IP Phone 7960G and 7940G
25
If you want to...
Then...
Remove any conference
participant
Highlight the participant’s name and press Remove. You can remove
participants only if you initiated the conference call.
End your participation in a
standard conference
Hang up or press EndCall. If you did not initiate the conference call,
hanging up will not disrupt the connection for the remaining parties.
If you initiated the conference call, hanging up might end the
conference (depending on how your system administrator configured
your phone). To avoid this, you can transfer the conference to
another caller before hanging up. That caller then acts as the “virtual
controller” for the conference. A virtual controller cannot add or
remove parties; however, the conference continues with the
established participants.
Tips
• Calls must be on the same line before you can add them to a standard conference call. If calls are
on different lines, transfer them to a single line before using Confrn or Join.
• If you get an error stating, “No Participant Info” when attempting to use Join, be sure that you
have selected at least one call in addition to the active call, which is selected automatically.
• Depending on how your phone is configured, if you leave a conference after creating it, the
conference might end. See the last row of the above table for more information.
Starting or Joining a MeetMe Conference Call
MeetMe conferencing allows participants to join a conference by calling the conference number
directly, rather than waiting for the conference initiator to call them. See the table below for details.
If you want to...
Then...
Establish a MeetMe
conference
Press NewCall or lift the receiver to go off-hook. Then press MeetMe
and dial the MeetMe conference number. (See your administrator for a
list of valid numbers.)
Remember to inform participants about the conference number, so that
they can dial in. However, participants will hear a busy tone if they call
the conference number before you have dialed in.
Participate in a MeetMe
conference
Dial the MeetMe conference number (provided by the conference
initiator). You will be connected to the conference only after the
conference initiator has dialed in.
End a MeetMe conference
Hang up or press EndCall.
26
OL-4637-03
Advanced Call Handling
Advanced Call Handling
Advanced call-handling tasks involve special (non-standard) features that your system administrator
might configure for your phone depending on your call-handling needs and work environment. You
will not have access to these features unless your system administrator enables them for you.
Storing and Retrieving Parked Calls
You can “park” a call when you want to store the call so that you or someone else can retrieve it from
another phone in the Cisco CallManager system (for example, a phone at a co-worker’s desk or in a
conference room). Call Park is a feature that your system administrator must enable for you.
If you want to...
Then...
Store an active call
using Call Park
During a call, press Park. (You may need to press the more softkey to see
Park.) This prompts your phone to store the call. Note the call park number
displayed on your phone screen and hang up.
Retrieve a parked call
Enter the call park number from any Cisco IP Phone in your network to
connect to the call.
You have a limited amount of time to retrieve the parked call before it
reverts to ringing at its original destination. See your system administrator
for this time limit.
Picking Up Redirected Calls on Your Phone
Your system administrator might enable Call PickUp for your phone if you share call-handling
responsibilities with co-workers. Call PickUp allows you to answer a call that is ringing on a
co-worker’s phone by redirecting the call to your phone. You can use Call PickUp features to handle
calls for co-workers who are in your call pickup group (PickUp), who are in another pickup group
(GPickUp), or who are in a group associated with your group (OPickUp).
Cisco IP Phone 7960G and 7940G
27
If you want to...
Then...
Answer a call that is ringing on
another extension within your call
pickup group
Press PickUp to connect to the call. (You might have to go
off-hook to press PickUp.)
Answer a call that is ringing on
another extension outside of your
group
Press GPickUp. (You might have to go off-hook to press
GPickUp.) Enter the group pickup code provided by your
system administrator to connect to the call.
If your system administrator did not enable auto-pickup, the
call will ring on your phone when you press PickUp. In this
case, press Answer to connect to the call.
If your system administrator did not enable auto-pickup, the
call will ring on your phone when you press GPickUp and
enter the group pickup code. In this case, press Answer to
connect to the call.
Answer a call that is ringing on
another extension in your group or
in an associated group
Press OPickUp to connect to the call. (You might have to go
off-hook to press OPickUp.)
If your system administrator did not enable auto-pickup, the
call will ring on your phone when you press OPickUp. In this
case, press Answer to connect to the call.
Tips
• When you press PickUp and GPickUp, you connect to the call that has been ringing for the longest
time.
• With OPickUp, your system administrator can associate multiple call pickup groups with your
group and assign a priority to the groups. When you press OPickUp, you connect to the ringing
call in the pickup group with the highest priority.
• If you want to pick up the call on an extension other than your primary line, first press
available line button) and then press a Call PickUp softkey.
28
(an
OL-4637-03
Advanced Call Handling
Using a Shared Line
Your system administrator might assign a “shared” phone line to you. Typically, a shared line has two
main uses:
• One person uses multiple phones—For example, your shared line is assigned to both your desk
phone and a lab phone. An incoming call to the shared line rings on both phones and you can use
either phone to answer the call.
• Multiple people share a line—For example, you are one of many people who can handle incoming
calls on the shared line, or you are a manager who shares an extension number with your assistant.
Understanding Shared Lines
Remote-in-Use
If you have a shared line, you might see the remote-in-use icon on your phone screen:
. This icon
indicates that a co-worker is currently using the shared line. You can place and receive calls as usual
on a shared line, even when the remote-in-use icon appears.
Sharing Call Information and Barging
Unless a co-worker who shares your line has the Privacy feature enabled, you can see information on
your phone screen about calls that your co-worker places and receives on the shared line. This
information might include caller ID and call duration. Conversely, when you are using a shared line,
information about your call is displayed on the co-worker’s phone screen.
When call information is visible in this way, you and co-workers can add yourselves to calls on the
shared line using either the Barge or cBarge feature. Adding yourself to a call on a shared line is called
barging. For more information about barging, see the “Adding Yourself to a Shared-Line Call” section
on page 30.
Privacy
If you do not want co-workers who share your line to see information about your calls, enable the
Privacy feature. Doing so also prevents co-workers from barging your calls. See the “Preventing Others
from Viewing or Barging a Shared-Line Call” section on page 31.
Maximum Supported Calls on a Shared Line
The maximum number of calls that a shared line supports can vary by phone. Thus, at times you might
not be able to make a new call on the shared line even if your co-worker can. For example, your phone
supports a maximum of four calls on a shared line and your co-worker’s phone supports five calls on
the same line. If there are four calls on the line, the NewCall softkey is unavailable to you but available
to your co-worker.
Cisco IP Phone 7960G and 7940G
29
Adding Yourself to a Shared-Line Call
If you share a phone line, your system administrator might provide you with Barge or cBarge. You can
use either feature to add yourself to an active call on your shared line. Typically, only one of these
features will be configured for you.
If you want to...
Then...
See if a co-worker has
an active call on the
shared line
Look at the shared line number. When the line is in use from another
phone, the remote-in-use icon appears:
.
View current calls on
the shared line
Press
for the shared line in use. All non-private calls appear on the call
activity area.
Add yourself to a call
on a shared line using
the Barge softkey
Highlight a remote-in-use call on your phone screen and press Barge. (You
may need to press the more softkey to display Barge.) Other parties hear a
beep tone announcing your presence.
If your co-worker has Privacy enabled, the Barge and cBarge softkeys are
not available and you cannot barge the call. In this case, you cannot view
information for the private call on your phone screen; however, you can
still use the shared line to place and receive new calls.
When you hang up, the remaining parties hear a disconnect tone and the
original call continues.
Add yourself to a call
on a shared line using
the cBarge softkey
Highlight a remote-in-use call on your phone screen and press cBarge. (You
may need to press the more softkey to display cBarge.) Other parties hear
a tone and brief audio interruption, and call information changes on the
phone screen.
Note that, unlike Barge, cBarge converts the call into a standard conference
call, allowing you to add new conference participants to the call. (To learn
more about conference features that you can use with cBarge, see the
“Making Conference Calls” section on page 24.)
When you hang up, the call remains a conference call (provided at least
three participants remain on the line).
Tips
• Barge and cBarge softkeys are not available for private calls.
• You cannot barge an encrypted call if the phone you are using is not configured for encryption.
When your barge attempt fails for this reason, your phone plays a fast busy tone. See the “Making
and Receiving Secure Calls” section on page 32.
• You will be disconnected from a call that you have joined using Barge if the call is put on hold,
transferred, or turned into a conference call.
30
OL-4637-03
Advanced Call Handling
Preventing Others from Viewing or Barging a Shared-Line Call
If you share a phone line, you can use the Privacy feature to prevent others who share the line from
viewing your calls or barging your calls (adding themselves to calls on the shared line using the Barge
or cBarge feature).
If you want to...
Then...
Prevent others from viewing or
barging any calls on a shared line
Enable Privacy by pressing Private. When Privacy is on, this
icon appears next to the Privacy feature button:
Allow others to view or barge any
calls on a shared line
Disable Privacy by pressing Private. When Privacy is off, this
icon appears next to the Privacy feature button:
Tips
• If a phone that shares your line has Privacy enabled, you can make and receive calls using the
shared line as usual. However, you cannot add yourself to existing calls on the shared line, and the
barge softkeys will not be available to you.
• The Privacy feature applies to all shared lines on your phone. Consequently, if you have multiple
shared lines on your phone and Privacy is enabled, coworkers will not be able to view or barge
calls on any of your shared lines.
Tracing Suspicious Calls
If you are receiving suspicious or malicious calls, your system administrator can add the Malicious Call
Identification (MCID) feature to your phone. This feature enables you to identify an active call as
suspicious, which initiates a series of automated tracking and notification messages.
If you want to...
Then...
Identify a suspicious call
Press MCID. You will hear a special tone and see the message, “MCID
successful” on your phone. The call remains active until you end the call.
Cisco IP Phone 7960G and 7940G
31
Making and Receiving Secure Calls
Depending on how your system administrator has configured your phone system, your phone might
support making and receiving secure calls.
Your phone is capable of supporting these types of calls:
• Authenticated call—The identities of all phones participating in the call have been verified.
• Encrypted call—The phone is receiving and transmitting encrypted audio (your conversation)
within the Cisco IP network. Encrypted calls are also authenticated.
• Non-secure call—At least one of the participating phones or the connection does not support these
security features, or the phones cannot be verified.
If you want to...
Then...
Check the security level of a call Look for one of these security icons to the right of the call duration
timer for a connected call:
Authenticated call
Encrypted call
Neither security icon appears if the call is non-secure.
Determine if secure calls can be
made in your company
Note
32
Contact your system administrator.
There are interactions, restrictions, and limitations that affect how security features work on
your phone. For more information, ask your system administrator.
OL-4637-03
Advanced Call Handling
Prioritizing Critical Calls
In some specialized environments, such as military or government offices, you might need to make and
receive urgent or critical calls. These critical calls might require higher priority handling, such as being
able to bypass other calls. If you have the need for this specialized call handling, your system
administrator can add Multilevel Precedence and Preemption (MLPP) to your phone.
Keep these terms in mind:
• Precedence indicates the priority associated with a call.
• Preemption is the process of ending an existing, lower priority call while accepting a higher
priority call that is sent to your phone.
If you...
Then...
Want to choose a priority (precedence) Contact your system administrator for a list of
level for an outgoing call
corresponding precedence numbers for calls.
Want to make a priority (precedence)
call
Enter the MLPP access number (provided by your system
administrator) followed by the phone number.
Hear a special ring (faster than usual)
or a special call waiting tone
You are receiving a priority (precedence) call. An MLPP
icon on your phone screen indicates the priority level of the
call.
Want to view the priority level of a call Look for an MLPP icon on your phone screen:
Low priority (priority) call
Medium priority (immediate) call
High priority (flash) call
Highest priority (flash override) or Executive
Override call
Higher priority calls are displayed at the top of your call list.
If you do not see an MLPP icon, the priority level of the call
is normal (routine).
Want to accept a higher-priority call
Answer the call as usual. If necessary, end an active call first.
Hear a continuous tone interrupting
your call
You or the other party are receiving a call that must preempt
the current call. Hang up immediately to allow the higher
priority call to ring through.
Tips
• When you make or receive an MLPP-enabled call, you will hear special ring tones and call waiting
tones that differ from the standard tones.
• If you enter an invalid MLPP access number, a verbal announcement will alert you of the error.
Cisco IP Phone 7960G and 7940G
33
Using a Handset, Headset, and Speakerphone
The table below describes how to use these devices.
If you want to...
Then...
Use the handset
Lift it to go off-hook; replace it to go on-hook.
Use a headset
Press
to toggle headset mode on and off. (AutoAnswer users
should see the “Using AutoAnswer with a Headset or the
Speakerphone” section on page 35 for exceptions.)
You can use the headset in conjunction with all of the controls on
your phone, including
and
.
See the “Obtaining a Headset” section on page 34 for headset
purchasing information.
Use the speakerphone
Press
to toggle speakerphone mode on or off.
Many of the actions you can take to dial a number or answer a call
will automatically trigger speakerphone mode, assuming that the
handset is in its cradle and
is not lit.
Switch to the speakerphone or
headset (from the handset)
during a call
Press
Switch to the handset (from the
speakerphone or headset)
during a call
Lift the handset. There is no need to push any buttons.
or
, then hang up the handset.
Tips
• See the “Connecting Your Phone” section on page 5 to locate the headset port.
• See the “Basic Call Handling” section on page 17 for detailed instructions about how to use the
handset, headset, and speakerphone to place, answer, end, and otherwise handle calls.
Obtaining a Headset
Your phone supports four- or six-wire headset jacks. For information about purchasing headsets, see
the “Headset Information” section on page 6 and go to the following URL: http://vxicorp.com/cisco
34
OL-4637-03
Using a Handset, Headset, and Speakerphone
Using AutoAnswer with a Headset or the Speakerphone
You might use AutoAnswer if you receive a high volume of incoming calls or handle calls on behalf of
others. Your system administrator configures AutoAnswer to work with either your speakerphone or
headset. See the table below for details.
If you...
Then...
Use AutoAnswer with a
headset
Keep headset mode active (in other words, keep
illuminated) even
when you are not on a call. To keep headset mode active, press EndCall
to hang up (rather than pressing
to end the call), then press NewCall
or Dial when placing new calls.
If your phone is set up to use AutoAnswer in headset mode, calls will be
answered automatically only if
is lit. Otherwise, calls will ring
normally and you will need to manually answer them.
Use AutoAnswer with the Keep the handset in the cradle and headset mode inactive (in other
speakerphone
words, keep
unlit).
If your phone is set up to use AutoAnswer in speakerphone mode, calls
will be answered automatically using the speakerphone only if the above
criteria are met. Otherwise, calls will ring normally and you will need to
manually answer them.
Cisco IP Phone 7960G and 7940G
35
Customizing Phone Settings
You can personalize your Cisco IP Phone by adjusting settings, as described in the tables below. Keep
these tips in mind:
• Most settings are accessible on your phone, but a few are accessed online from your User Options
web pages. See the “Logging In to the User Options Web Pages” section on page 41 for more
information.
• If you want to revert to setting values that were originally coded into the phone at the factory,
choose
> Default. (You may need to press the more softkey to see Default.) Volume levels
and values in the Contrast and Ring Type menus will be affected.
• If
is not responsive, your system administrator might have disabled this button on your
phone. Ask your system administrator for more information.
Adjusting the Volume
The table below describes how to adjust and save volume levels on your phone.
If you want to...
Then...
Adjust the volume
level for a call
Press
during a call or after invoking a dial tone.
You can press Save to save this volume setting for future calls.
Note that volume settings for the handset, speakerphone, and headset must
be adjusted separately.
Adjust the volume
level for the ringer
36
Press
while the handset is in the cradle and the headset and
speakerphone buttons are off. Continue pressing the button to increase or
decrease the volume. The new ringer volume is saved automatically.
OL-4637-03
Customizing Phone Settings
Customizing Rings and Message Indicators
You can customize the way that your phone indicates an incoming call or a new voice mail message
for each of your lines. Customized ring sounds and other indicators can help you quickly differentiate
between multiple lines. For example, you can choose a chirping sound to indicate an incoming call on
Line 1 and a drumbeat to indicate an incoming call on Line 2.
If you want to...
Then...
Change the ring sound
Choose
> Ring Type.
Select a phone line or the default ring setting. Use the Navigation
button to scroll through the ring types. Press Play to hear the selected
ring type. When you find a ring sound that you want, press Select, then
press OK.
You can apply the default ring setting to a selected phone line by
pressing Default.
Change the ring pattern
(flash-only, ring once,
beep-only, etc.)
Log in to your User Options web pages, select your device, then choose
Change the Ring Settings for your phone from the main menu.
Change the way that the
voice message light on your
handset works
Log in to your User Options web pages, select your device, then choose
Change the Message Waiting Lamp policy... from the main menu.
Typically, the default system policy tells your phone to “always light”
when you receive a new voice message.
Customizing the Phone Screen
You can adjust the contrast and the language for your phone screen.
If you want to...
Then...
Change the phone
screen contrast
Choose
> Contrast. Press Up, Down or
, then press
OK. Or press Cancel to revert to the previously saved setting.
Change the language on Log in to your User Options web pages, select your device, then choose
your phone screen
Change the Locale... from the main menu. See the “Logging In to the User
Options Web Pages” section on page 41 for more information.
Cisco IP Phone 7960G and 7940G
37
Setting Up Speed Dial Features
Speed dial features allow you to press a button or enter an index code to place a call.
You can set up speed dialing for your phone in two ways:
• Speed dialing with a button—You can assign a speed dial number to any available programmable
button on your phone that has not already been configured as a line, feature, or service button.
• Speed dialing with an index code—Using the Abbreviated Dialing feature, you can enter an
assigned index number (1 to 99) rather than dialing the entire phone number.
Set up both types of speed dial features from your User Options web pages, as described in the table
below. (See the “Logging In to the User Options Web Pages” section on page 41 for more information
about your User Options pages.)
If you want to...
Then...
Add speed dial
numbers to phone
buttons
Log in to your User Options web pages, select your device, then choose
Add/Update Speed Dials from the main menu.
In the Speed Dial Settings on Phone section, enter a phone number and label for
each available speed dial button. Enter the number exactly as you would dial it
from your desk phone. For example, enter an access code such as 9 or the area
code, if necessary.
The label you enter appears next to the speed dial button on your phone screen.
Add speed dial
numbers to use
with Abbreviated
Dialing
Log in to your User Options web pages, select your device, then choose
Add/Update Speed Dials from the main menu.
Remove a speed
dial number
Delete the phone number and label from either of the speed dial web pages.
In the Speed Dial Settings not associated with a phone button section, enter a
phone number and label for each available speed dial button. Enter the number
exactly as you would dial it from your desk phone. For example, enter an access
code such as 9 or the area code, if necessary.
Tips
• For details on making calls using either speed dial feature, see the “Placing a Call” section on
page 17.
• Your system administrator can assign speed dial buttons to your phone and restrict the number of
speed dial buttons that you can configure.
38
OL-4637-03
Using Voice Messaging, Call Logs, and Directories
Using Voice Messaging, Call Logs, and Directories
This section describes how you can use feature buttons to access voice messages, call logs, and
directories.
Accessing Voice Messages
Your company determines the voice message service that your phone system uses. For the most
accurate and detailed information about this service, refer to the documentation that came with it. For
a general overview of voice message service features, refer to the table below.
If you want to...
Then...
Set up and
Press
and follow the voice instructions. If a pop-up messages menu
personalize your
appears on your phone screen, choose an appropriate menu item.
voice message service
See if you have a new
voice message
Look at your phone for the following indicators:
• A steady red light on your handset. (This indicator can vary. See the
“Customizing Rings and Message Indicators” section on page 37.)
• A flashing envelope icon
Listen to your voice
messages or access
the voice messages
menu
and text message on your phone screen.
Press
. Depending on your service, doing so either auto-dials your
voice message service or provides a pop-up menu on your phone screen.
Send a call to your
Press iDivert. The iDivert feature automatically transfers a call (including a
voice message system ringing or held call) to your voice message system. Callers will hear your
voice message greeting and can leave you a message.
Cisco IP Phone 7960G and 7940G
39
Using Call Logs and Directories
Your phone maintains logs of your missed, placed, and received calls. You can use the Directories
button to view and dial from call logs. You can also access a corporate directory (if applicable).
If you want to...
Then...
View your call logs
Choose
> Missed Calls, Placed Calls, or Received Calls. A maximum
of 32 records is stored in each of these logs.
Dial from a call log
Choose a listing and go off-hook. If you need to edit the number displayed in
the log, press EditDial followed by << or >> to move the cursor or erase
digits. Use the keypad to enter digits.
If you want to dial from a call log while on an active call, scroll to a listing
and press Dial. Then choose a softkey to handle the original call:
• Hold—Puts the first call on hold and dials the second.
• EndCall—Disconnects the first call and dials the second.
• Transf—Transfers the first party to the second. (Press Transf twice.)
• Confrn—Creates a conference call with all parties. (Press Confrn twice).
Erase your call logs
Press
, then press Clear. Doing so erases your Missed, Placed, and
Received call logs.
Dial from a corporate Choose
> Corporate Directory (exact name can vary). Search for a
directory
listing by entering letters with your keypad. (You can search using a partial
name.) To dial from a listing, scroll to it and go off-hook.
If you want to dial from a directory while on an active call, scroll to a listing
and press Dial. Then choose a softkey to handle the original call:
• Hold—Puts the first call on hold and dials the second.
• EndCall—Disconnects the first call and dials the second.
• Transf—Transfers the first party to the second. (Press Transf twice.)
• Confrn—Creates a conference call with all parties. (Press Confrn twice).
Note
40
If the network shuts down or is reset, you might lose information in your call logs.
OL-4637-03
Accessing Your User Options Web Pages
Accessing Your User Options Web Pages
Because your Cisco IP Phone is a network device, it can share information with other network devices
in your company, including your computer and web-based services accessible using a web browser on
your computer.
You can establish phone services, and control settings and features from your computer using the
Cisco CallManager User Options web pages. Once you configure features and services on the web
pages, you can access them on your phone.
For example, you can set up speed dial buttons from your web pages, then access them on your phone.
This section describes how to access your User Option web pages and how to subscribe to phone
services. For more details about the features you can configure and the phone services to which you
can subscribe, refer to Customizing Your Cisco IP Phone on the Web at the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm
Logging In to the User Options Web Pages
Procedure
Step 1
Obtain a User Options URL, user ID, and default password from your system administrator.
Step 2
Open a web browser on your computer and enter the URL (provided by your system
administrator) and log on.
Step 3
From the general menu, select your device type (phone model) in the “Select a device”
drop-down list.
After you make your selection, a context-sensitive menu appears with options appropriate for
your device type.
Tips for Navigating the User Options Pages
• Select your device from the menu page to see all of your options.
• Click Update to apply and save your changes.
• Click Return to the Menu to get back to the context-sensitive menu.
• Click Log Off to exit the User pages.
Cisco IP Phone 7960G and 7940G
41
Subscribing to Phone Services
Before you can access subscription phone services on your phone, you need to subscribe to them by
using your computer to access the User Options web pages. (See the “Logging In to the User Options
Web Pages” section on page 41 for help logging in.)
Phone services can include:
• Web-based information, such as stock quotes, movie listings, and weather reports
• Network data, such as corporate calendars and searchable directories
• Phone features, such as My Fast Dials and a Personal Address Book
Refer to the table below for more information.
If you want to...
Then do this after you log in and select your device type...
Subscribe to a service
From the main menu, choose Configure your Cisco IP Phone Services.
Select a service from the “Available Services” drop-down list and click
Continue. Enter more information upon request (such as a zip code or
PIN), then click Subscribe.
Change or end
subscriptions
From the main menu, choose Configure your Cisco IP Phone Services.
Click a service in the “Your Subscribed Services” panel. Click Update
after making changes, or click Unsubscribe.
Add a service to a
programmable button
After subscribing to a service, choose Add/Update your Service URL
Buttons from the main menu. For each available button, select a service
from the drop-down list and enter a text description. Click Update after
making changes. Your system administrator determines how many
programmable buttons are available for services and might assign service
buttons to your phone.
Access a service on your
phone
Press
on your phone. Or, if you have added a service to a
programmable button, press
(the programmable button) that
corresponds to the service.
Learn how to use phone
services
Refer to Customizing Your Cisco IP Phone on the Web:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/
index.htm
42
OL-4637-03
Understanding Additional Configuration Options
Understanding Additional Configuration Options
Your system administrator can configure your phone to use specific button and softkey templates
along with special services and features, if appropriate. The table below provides an overview of some
configuration options that you might want to discuss with your phone system administrator based on
your calling needs or work environment.
Note
You can locate User Guides and other documents listed in this table from the following URL:
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/index.htm
If you...
Then...
For more information...
Need to handle
more calls on your
phone line
Ask your system administrator to
configure your line to support more calls.
Talk to your system administrator
or phone support team.
Need more than
one phone line
Ask your system administrator to
Talk to your system administrator
configure one or more additional directory or phone support team.
numbers for you.
Need more speed
dial buttons
First make sure that you are using all of
your currently available speed dial
buttons.
If you need additional speed dial buttons,
try using Abbreviated Dialing or
subscribing to the Fast Dial service.
Ask your system administrator about the
option of attaching a Cisco IP Phone 7914
Expansion Module to your phone.
Work with (or
work as) an
administrative
assistant
Consider using:
Want to use one
extension for
several phones
Request a shared line. This allows you to
use one extension number for your desk
phone and lab phone, for example.
See the:
• “Setting Up Speed Dial
Features” section on page 38
• “Subscribing to Phone
Services” section on page 42
• Cisco IP Phone 7914
Expansion Module Phone
Guide
See the:
• The Cisco IP Manager Assistant
service
• Cisco IP Manager Assistant
User Guide
• a shared line
• “Using a Shared Line” section
on page 29
Cisco IP Phone 7960G and 7940G
See the “Using a Shared Line”
section on page 29.
43
If you...
Then...
For more information...
Share phones or
office space with
co-workers
Consider using:
Ask your system administrator
about these features and see the:
• Call Park to store and retrieve calls
without using the transfer feature
• Call Pickup to answer calls ringing on
another phone using your own phone
• a shared line to view and add yourself
to calls in progress
• Cisco Extension Mobility to apply
your phone number and user profile to
a shared phone
• “Advanced Call Handling”
section on page 27
• “Using a Shared Line” section
on page 29
• “Using the Extension
Mobility Service” section in
the document called
Customizing Your Cisco IP
Phone on the Web
Answer calls
frequently or
handle calls on
someone’s behalf
Ask your system administrator to set up
the AutoAnswer feature for your phone.
See the “Using AutoAnswer with a
Headset or the Speakerphone”
section on page 35.
Need to make
video calls
Consider using Cisco VT Advantage,
which enables you to make video calls
using your Cisco IP Phone, your personal
computer, and an external video camera.
Contact your system
administrator for assistance and
see the Cisco VT Advantage User
Guide and Cisco VT Advantage
Quick Start Guide.
Want to
Ask your system administrator about the
temporarily apply Cisco Extension Mobility service.
your phone
number and
settings to a shared
Cisco IP Phone
See the “Using the Extension
Mobility Service” section in
Customizing Your Cisco IP Phone
on the Web.
44
OL-4637-03
Troubleshooting Your Phone
Troubleshooting Your Phone
This section tells you how to access information about your Cisco IP Phone and phone calls to help
your system administrator or technician diagnose problems with your phone.
If you are asked to...
Then...
Access network
configuration data
Choose
> Network Configuration and select the network
configuration item that you want to view.
Access status data
Choose
> Status and select the status item that you want to view.
Access phone model
information
Choose
> Model Information.
Note
If
is not responsive, your system administrator might have disabled this button on
your phone. Ask your system administrator for more information.
Using the Quality Reporting Tool
Your system administrator may temporarily configure your Cisco IP Phone with the Quality Reporting
Tool to help troubleshoot performance problems. You can use the QRT softkey to submit information
about problem phone calls to your system administrator.
Depending on how your system administrator configured the Quality Reporting Tool for your phone,
you can use the QRT softkey in one of two ways:
If you want to...
Then...
Quickly report an
audio problem for a
current call
While on the call, press QRT. (You might need to press more first.)
Report a problem with
your phone calls
Your phone system will collect and log audio data for the current call and
route this information to your system administrator.
Press QRT. (You might need to press more first.) Select the problem you
want to report from the list of problem categories. Some problem
categories include a reason code that you can select to provide more details
about the problem.
Your phone will route this information to your system administrator.
Cisco IP Phone 7960G and 7940G
45
Cisco One-Year Limited Hardware Warranty Terms
There are special terms applicable to your hardware warranty and various services that you can use
during the warranty period. Your formal Warranty Statement, including the warranty applicable to
Cisco software, is included on the Cisco Documentation CD and on Cisco.com. Follow these steps to
access and download the Cisco Information Packet and your warranty document from the CD or
Cisco.com.
1. Launch your browser, and go to this URL:
http://www.cisco.com/univercd/cc/td/doc/es_inpck/cetrans.htm
The Warranties and License Agreements page appears.
2. To read the Cisco Information Packet, follow these steps:
a. Click the Information Packet Number field, and make sure that the part number
78-5235-02F0 is highlighted.
b. Select the language in which you would like to read the document.
c. Click Go.
d. The Cisco Limited Warranty and Software License page from the Information Packet appears.
e. Read the document online, or click the PDF icon to download and print the document in
Adobe Portable Document Format (PDF).
Note
You must have Adobe Acrobat Reader to view and print PDF files. You can download
the reader from Adobe’s website: http://www.adobe.com
3. To read translated and localized warranty information about your product, follow these steps:
a. Enter this part number in the Warranty Document Number field:
78-10747-01C0
b. Select the language in which you would like to view the document.
c. Click Go.
The Cisco warranty page appears.
d. Read the document online, or click the PDF icon to download and print the document in
Adobe Portable Document Format (PDF).
You can also contact the Cisco service and support website for assistance:
http://www.cisco.com/public/Support_root.shtml.
46
OL-4637-03
Cisco One-Year Limited Hardware Warranty Terms
Duration of Hardware Warranty
One (1) Year
Replacement, Repair, or Refund Policy for Hardware
Cisco or its service center will use commercially reasonable efforts to ship a replacement part within
ten (10) working days after receipt of a Return Materials Authorization (RMA) request. Actual
delivery times can vary, depending on the customer location.
Cisco reserves the right to refund the purchase price as its exclusive warranty remedy.
To Receive a Return Materials Authorization (RMA) Number
Contact the company from whom you purchased the product. If you purchased the product directly
from Cisco, contact your Cisco Sales and Service Representative.
Complete the information below, and keep it for reference.
Company product purchased from
Company telephone number
Product model number
Product serial number
Maintenance contract number
Cisco IP Phone 7960G and 7940G
47
48
OL-4637-03
Index
A
call-handling, basic 17
calls
answering calls, options for 20
answering 20
audio problems, reporting 45
compared to lines 12
authenticated calls, icon for 32
conference features for 24
AutoAnswer, using 35
ending 21
forwarding 23
handling multiple 14
B
holding and resuming 21
barge
icons for 13
and privacy 31
maximum per line 12, 29
and shared lines 29
multiple parties on 24
using 30
muting 21
buttons, identifying 16
parking 27
placing 17
C
prioritizing 33
redirecting while ringing 20, 27
call activity area, viewing 11
reporting problems with 45
call forwarding, using 23
secure 32
call logs
selecting 13
dialing from 18
storing and retrieving 27
erasing 40
transferring 22
viewing and dialing from 40
viewing 11, 14
call park, using 27
cBarge, See barge
call pickup, using 27
Cisco IP Phone
call waiting, using 20
adjusting height of 6
CallBack, using 18
connecting 5
call-handling, advanced 27
Cisco IP Phone 7960G and 7940G
49
description of 8
F
documentation for 4
feature configuration for 12, 43
Fast Dial service
illustration of 9
dialing with 19
online help for 16
subscribing to 42
registering 6
feature buttons
securing handset rest 6
directories 10
web-based services for 41
help 10
conference calls
MeetMe 24, 26
standard 24, 25
types of 24
corporate directory
dialing from web page with 18
using on phone 18
messages 10
services 10
settings 10
feature menus, using 15
features, availability of 12
footstand
adjusting 6
button, identifying 10
D
dialing, options for 17
forwarding calls, options for 23
G
directories button, description of 10
directory
group call pickup, using 27
dialing from web page with 18
using on phone 18, 40
H
documentation, accessing 4
handset
E
encrypted calls, icon for 32
ending a call, options for 21
extension numbers, viewing 11
light strip 9
securing in cradle 6
using 34
volume 36
hanging up, options for 21
headset
answering calls with 20
button, identifying 10
hanging up with 21
50
OL-4637-03
mode, using 34
M
placing calls with 18
volume 36
Malicious Call Identification (MCID), using 31
headset performance, general 6
MeetMe conferences 24, 26
help button, description of 10
menus, using 15
help, using 16
messages
hold
and switching calls 14
indicator for 37, 39
listening to 39
and transferring 22
messages button, description of 10
using 21
missed calls, records of 40
MLPP, using 33
multiple calls, handling 14
I
mute button, description of 10
icons
mute, using 21
for call states 13
on buttons 16
N
installing, Cisco IP Phone 5
navigation button, description of 10
K
network configuration data, locating 45
new calls, options for placing 17
keypad
description of 10
O
entering text with 15
off-hook
description of 12
L
dialing 17
line buttons, identifying 10
lines
description of 12
viewing 11
Cisco IP Phone 7960G and 7940G
on-hook
description of 12
dialing 17
online help, using 16
51
resume, using 21
P
ringer
Personal Address Book (PAB)
customizing 37
dialing from 19
indicator for 9
subscribing to 42
volume 36
phone lines
buttons for 10
description of 12
viewing 11
phone screen
adjusting contrast of 37
changing language of 37
choosing items 15
cleaning 4
features of 11
placed calls, records of 40
placing calls, options for 17
prioritizing calls 33
privacy
and shared lines 29
using 31
programmable buttons
description of 10
labels for 11
S
safety, warnings 2
secure calls, description of 32
selecting calls 13
services button, description of 10
services, subscribing to 42
settings
customizing 36
using default 36
settings button, description of 10
shared lines
and remote-in-use icon 29
description of 29
maximum calls on 29
with barge 30
with privacy 31
softkey buttons
description of 10
Q
labels for 11
speakerphone
QRT, using 45
answering calls with 20
button, identifying 10
R
hanging up with 21
mode, using 34
received calls, records of 40
placing calls with 17
redial, using 17
volume 36
remote-in-use icon for shared lines 29
52
OL-4637-03
speed dial
W
buttons, configuring 38
buttons, identifying 10
warnings, safety 2
labels 11
WebDialer, using 18
using 17
status data, locating 45
status line, viewing 11
suspicious calls, tracing 31
switching calls 14
T
TAPS, using 6
text, entering on phone 15
Tool for Auto-Registered Phones Support 6
transferring, options for 22
troubleshooting, data for 45
U
User Options web pages
accessing 41
and phone services 42
V
voice message indicator, identifying 39
voice message service, using 39
volume
adjusting 36
using default 36
volume button, description of 10
Cisco IP Phone 7960G and 7940G
53
54
OL-4637-03
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
European Headquarters
Cisco Systems International BV
Haarlerbergpark
Haarlerbergweg 13-19
1101 CH Amsterdam
The Netherlands
www-europe.cisco.com
Tel: 31 0 20 357 1000
Fax: 31 0 20 357 1100
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
www.cisco.com
Tel: 408 526-7660
Fax: 408 527-0883
Asia Pacific Headquarters
Cisco Systems, Inc.
168 Robinson Road
#28-01 Capital Tower
Singapore 068912
www.cisco.com
Tel: +65 6317 7777
Fax: +65 6317 7799
Cisco Systems has more than 200 offices in the following countries. Addresses, phone numbers, and fax numbers are listed on the
Cisco Web site at www.cisco.com/go/offices
Argentina • Australia • Austria • Belgium • Brazil • Bulgaria • Canada • Chile • China PRC • Colombia • Costa Rica • Croatia • Cyprus • Czech Republic • Denmark • Dubai, UAE
Finland • France • Germany • Greece • Hong Kong SAR • Hungary • India • Indonesia • Ireland • Israel • Italy • Japan • Korea • Luxembourg • Malaysia • Mexico
The Netherlands • New Zealand • Norway • Peru • Philippines • Poland • Portugal • Puerto Rico • Romania • Russia • Saudi Arabia • Scotland • Singapore
Slovakia • Slovenia • South Africa • Spain • Sweden • Switzerland • Taiwan • Thailand • Turkey • Ukraine • United Kingdom • United States • Venezuela • Vietnam • Zimbabwe
Copyright © 2005 Cisco Systems, Inc. All rights reserved. CCSP, the Cisco Square Bridge logo, Follow Me Browsing, and StackWise are trademarks of Cisco Systems, Inc.; Changing
the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Access Registrar, Aironet, ASIST, BPX, Catalyst, CCDA, CCDP, CCIE, CCIP,
CCNA, CCNP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Empowering
the Internet Generation, Enterprise/Solver, EtherChannel, EtherFast, EtherSwitch, Fast Step, FormShare, GigaDrive, GigaStack, HomeLink, Internet Quotient, IOS, IP/TV, iQ
Expertise, the iQ logo, iQ Net Readiness Scorecard, LightStream, Linksys, MeetingPlace, MGX, the Networkers logo, Networking Academy, Network Registrar, Packet, PIX, PostRouting, Pre-Routing, ProConnect, RateMUX, ScriptShare, SlideCast, SMARTnet, StrataView Plus, SwitchProbe, TeleRouter, The Fastest Way to Increase Your Internet Quotient,
TransPath, and VCO are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word partner does not imply a partnership relationship
between Cisco and any other company. (0501R)
OL-4637-03
">